SPECIFICATION PHOENIX LIFT
Transcript of SPECIFICATION PHOENIX LIFT
PHOENIX LIFT
SPECIFICATION
Aussie Lifts Pty Ltd
Y E A R 2 0 2 1
12 Achievement Crescent Acacia Ridge, Brisbane [email protected] 287 543
Australia's most cost effective home lift
The Phoenix
Capable of servicing up to four levels, with a maximum travel of 7.20
meters, the Phoenix is powered by an advanced hydraulic system that
not only pushes the boundaries of residential lift performance but also
dramatically reduces the pit and overhead height requirement.
Supplied as a complete free-standing unit with its own self-supporting
aluminum tower, doors, and power unit, the Phoenix provides flexibility in
speed, weight capacity sizing, and finishes.
Designed and manufactured in Australia, our sales team will work with
you to provide a custom-built home lift to suit your individual needs in as
little as 6-weeks.
STAY IN THE HOME
YOU LOVE!
Y E A R 2 0 2 1
Y E A R 2 0 2 1
With lifts installed to over 5000 locations Australia-wide, you can rest assured of the highest quality and guidance every step of the way. To put your mind at ease, we offer a detailed lift consultancy service to identify and customise the best product fit for you.
The PHOENIX
Standard
Measurements
Main Specifications
Y E A R 2 0 2 1
Weight Capacity - 350kg
Lift Speed - 0.25m/s
Max Travel: 7.2m
Compliance: AS1735 16, 18
Application: Internal and External
Control: Fully Automatic Operation
Power Supply: 230v (Optional 400v 3 phase)
Door con�gurations: Right or left swing, up to 2 doors per landing
Supplied with an impressive list of standard safety features, the
Phoenix offers peace of mind with its in-car emergency telephone,
infra-red door sensors, emergency backup battery systems, and
emergency lowering facilities
Standard Safety Feature's
Y E A R 2 0 2 1
Cost Effective Self Supporting Shaft - no load-bearing walls required
No separate machine room construction required
Lift is pre-assembled and commissioned at our factory before
dispatch to site
Low service costs and power consumption
Can be installed externally up to wind region C3
Piece of Mind Manufactured in Australia since 1994
Built to Australian Conditions
Guaranteed availability of parts for 15 years
Industry-leading Warranty
Custom Built to your specification
Unrivalled after-sales service
Maintenance For optimum performance, reliability, and long term use, the lift
should be serviced every 12 months by an approved lift technician
Installation Supplied, assembled and pretested, the design of the Phoenix
allows for easy installation by either craning in as a single piece
or by dismantling and resembling
Installation can be completed within as little as one day
CustomisationsEach lift is custom designed and constructed to your requirements
with an impressive list of options available including...
Automatic door operators
Voice Control of the lift
Access Control security features
Flood switch sensors for flood zones
Door options to match what is existing in the property
Copy right 2021 by Aussie Lifts Pty Ltd. All Rights Reserved. This Brochure is for information purposes only. Information may change without notice. All Dimensions and Specifications are a guide only and must NOT be used for construction purposes. All changes must be in accordance with the lift code and the manufacturer reserves the right to approve or refuse any changes.