SPECIFICATION FOR APPROVAL - Farnell element14I.T.E. POWER SUPPLY 110369-0317 APR.11th.2014 (B0)...

Ideal Power LtdIdeal Power, Ideal House, Tree Beech Enterprise Park, Gunn, Barnstaple, Devon, EX32 7NZ, England, UK Tel: +44 (0) 845 260 3400 Email: [email protected] Web: www.idealpower.co.uk

Ideal Power Ltd Product Specification Document

I.T.E. POWER SUPPLY

110369-0317 APR.11th.2014

(B0)

HK-AJ-050A300-CP HKSC-110369

VENDOR APPROVED SIGNATURES

DATE:

CUSTOMER APPROVED SIGNATURES

PART NO:

SPECIFICATION FOR APPROVAL

DESIGNED NO:

MODEL NO:

DESCRIPTION:

CUSTOMER:

REV:

2014.04.112014.04.112014.04.11

Ideal Power, 14 Larks Way, Tree Beech Enterprise Park, Gunn, Barnstaple, Devon, England EX32 7NZ

Web: www.idealpower.co.uk email: [email protected] TEL +44 (0) 845 2603400 Fax +44 (0) 845 2603401

Description Ext. PSU

Model Number 25HK-AJ-050A300-CP

Revision B0

Notes -


SAFETY APPROVAL:ENGINEER APPROVAL:

ELECTRICAL STRUCTURAL

REMARKSDESCRIPTION

SPECIFICATION CHANGE HISTORY

CUSTOMER HKSC-110369HK-AJ-050A300-CP (B0)

Ideal Power

A1 11.06.17 4.75-5.25V 4.7-5.3VA2 11.11.08 Plug 5.5*2.1*12

5.0*2.1*12 LA3 12.03.19 CCC LOGO

A4 13.06.25123

1. EMC (update EMC standard and French warning words) 2. (Update the safety logo on the label) 3. PSE (Add PSE approval information & logo) 4. "P/N: 25HK-AJ-050A300-CP" " RoHS"

Add labels on the individual cartons: Label 1: P/N: '25HK-AJ-050A300-CP'& also the RoHS label

5. of 12,UK on page 8 of 12 please show the UK plug on the drawing with other plugs on the side

14.04.11B0

of 13


11. PROTECTION10. INSULATION RESISTANCE9. DIELECTRIC STRENGTH (Hi-Pot) TEST

14. RELIABILITY AND QUALITY CONTROL15. SAFETY16. OVERALL DRAWING

19. MARKING18. PACKING

12. ENVIRONMENTAL CONDITIONS13. EMI/ EMC

1. INTRODUCTION2. INPUT REQUIREMENTS

5. LINE REGULATION6.HOLD UP TIME7.TURN ON TIME8.TEMPERATURE COEFFICIENT

3. OUTPUT REQUIREMENTS4. EFFICIENCY

DESCRIPTION : I.T.E. POWER SUPPLY

MODEL NO. :PART NO. :

CONTENTS

2014.04.11REV: (B0)

PAGE NO. :ISSUED DATE:

17. USE SPECIFICATION

1 OF 12HKSC-110369

HK-AJ-050A300-CP

20. TEST REPORT


Web: www.idealpower.co.uk email: [email protected] TEL +44 (0) 845 2603400 Fax +44 (0) 845 2603401 of 13


2.2 Input Frequency Range: 47 Hz to 63 Hz 2.1 Input Voltage Range: 100(-10%)VAC to 240(+10%)VAC

This document specifies a switching power supply with a output of +5V, and electronic process. The switching power supply will provide power for technology equipments including electrical business equipment.The adaptor meets the requirement of lead free and RoHS.

PAGE NO. :

REV: (B0)ISSUED DATE:

3.3 Output Load Range: 0-3.0A

2.4 Input In-rush Current: 50A Max

2.5 Input Current: 0.8A Max

3.2 Output Regulation:

3.1 Output Voltage:3.0 OUTPUT REQUIREMENTS

+5V

4.75-5.25V

2.0 INPUT REQUIREMENTS

PART NO. : MODEL NO. :


1.0 INTRODUCTION

2014.04.112 OF 12HK-AJ-050A300-CP

HKSC-110369

2.3 Input Power Consumption at no-load : 0.3W Max

76.41%

3.4 Output Ripple & Noise: 200mV Max @20MHz bandwidth with

7.0 TURN ON TIME: 2S Max at 110VAC full load.

10UF/50V capacitance and 104/50V ceramic capacitor.

4.0 EFFICIENCY: @ average of 25/50/75/100% loads &115/230VAC input

6.0 HOLD UP TIME: 10ms Min at 110VAC full load.

5.0 LINE REGULATION: ± 2% maximum



of 13


overload shall provide automatic recovery for the output voltage.

11.2.2 Short Circuit Protection: Auto Recovery.

11.2 Output Protection

11.2.1 Output Current:

The switching power supply has a 2 Amps inner current fuse to protect itself.

9.2 Finished product withstands AC 3.0KV, for 2 second, 4mA Max primary to

9.1 Finished product withstands AC 3.0KV, for 2 second, 4mA Max primary to

PAGE NO. :

REV: (B0)ISSUED DATE:

secondary.

11.1 Input Protection

11.0 PROTECTION

10.0 INSULATION RESISTANCE

9.0 DIELECTRIC STRENGTH (Hi-Pot) TEST

Primary to secondary: 50M OHM to 500VDC.

8.0 TEMPERATURE COEFFICIENT: 0.05%/°C

MODEL NO. :PART NO. :DESCRIPTION : I.T.E. POWER SUPPLY

2014.04.11

case.

3 OF 12HK-AJ-050A300-CP

HKSC-110369

Overload conditions shall decrease the output voltage Removal of an

output



of 13


The burn-in test will be performed at least 2 hours at 40 centigrade degrees

When the operation is compling with this specification, the switching power supply s MTBF will be 50,000 hours at 25 centigrade degrees.

The switching power supply can withstand the following environmental conditions:

ISSUED DATE:REV: (B0)

PAGE NO. :

14.1 Burn-in

under full load condition. 14.2 MTBF

15.0 SAFETY

13.0 EMI / EMC

Relative Humidity: 10% ~ 95%

Relative Humidity: 10%~95%

12.1 Storage Temperature:-20 ~ +70

12.2 Operation

14.0 RELIABILITY AND QUALITY CONTROL

Temperature:0°C~40°C

12.0 ENVIRONMENTAL CONDITIONS

DESCRIPTION : I.T.E. POWER SUPPLYPART NO. :MODEL NO. :

2014.04.114 OF 12HK-AJ-050A300-CP

HKSC-110369

The switching power supply has approved by the following standards:

The switching power supply has approved by the following safety standards:



AS/NZS CISPR 22:2009 Class B

EN55022:2010/AC:2011EN61000-3-2:2006/A2:2009 EN61000-3-3:2008EN55024:2010/AC:2011IEC61000-4-2:2008 IEC61000-4-3:2006/A1:2007/A2:2010 IEC61000-4-4:2012IEC61000-4-5:2005 IEC61000-4-6:2008 IEC61000-4-8:2009 IEC61000-4-11:2004

FCC PART 15 Class B

UL 60950-1, 2nd Edition,2011-12-19 CSA C22.2 NO.60950-1-07, 2nd Edition,2011-12

BS EN60950-1:2006+A1+A12AS/NZS 60950.1:2011+A1EN60950-1:2006+A11+A1+A12

GB8898-2011

GB17625.1-2012; GB13837-2012

J60950-1(H19)

J55022(H20)

of 13


UNIT: mm


16. OVERALL DRAWING


REV: (B0)2014.04.11

PAGE NO. : ISSUED DATE:

5 OF 12HK-AJ-050A300-CP

HKSC-110369

Safety Marking

88.5±1

46.0±136.0±1

35-J

4.9±0.3

10.5±0.5

8.1±0.3

1.5*31.6

TIP 27

.3±0

.2

10±0.5

16.8

±0.5 2.1±

0.2

1.2*3

1830±30

TIP

TIP

AW

G#18

SPT-1



POUR UTILISATION À INTÉRIEUR SEULEMENT

ATTENTION

of 13


REV: (B0)


DESCRIPTION : I.T.E. POWER SUPPLYPART NO. : MODEL NO. :

2014.04.116 OF 12HK-AJ-050A300-CP

HKSC-110369

HK-04N20286

2.5A 250V~

HK-03

2.5A 250V~EN 60320-1

HON-KWANG

2.5A250V~HK-02

HON-KWANG

B2.5A125V~E246753

HK-01

ESP

46.0±1

88.5±1

88.5±1

46.0±1

36.0±1

36.0±1

36.0±1

36.0±1

UNIT: mmUNIT: mm

UL TUV

UK SAA

46A




8.1±0.3

8.1±0.38.1±0.38.1±0.3

10±0.5

TIP

TIP

TIP

TIP 27

.3±0

.2

27.3

±0.2

TIPTIP 27

.3±0

.2

8.1±0.3

27.3

±0.2

TIP

UNIT: mm

HKSC-110369

HK-AJ-050A300-CP 7 OF 122014.04.11

DESCRIPTION : I.T.E. POWER SUPPLYPART NO. :MODEL NO. :

ISSUED DATE:REV: (B0)

PAGE NO. :

TIP 27

.3±0

.2

TIP






REV: (B0)2014.04.11


17. USE SPECIFICATION

8 OF 12HK-AJ-050A300-CP

HKSC-110369

Please don't insert article alone at the wall.

WARNING!TI

PT

IP

TIP

TIP

TIP

TIP

TIP

TIP

0.7

2.35

2.1

5.5 6.3

3.0 2.1

5.5 5.5

2.5

3.4

1.31.7

4.75 4.0

1.7

Instruction manual card

UNIT: mm



46A

of 13


2014.04.11REV: (B0)

18.1 Inner Box


MODEL NO. :

18. PACKING

PART NO. :PAGE NO. :ISSUED DATE:

9 OF 12HK-AJ-050A300-CP

HKSC-110369

Width: 75

Height: 65

Length: 145

NOTICE:Its probably different from the white box of the sample and the figure dimension. The white box is used to pack during product.



RoHS24

6

25HK-AJ-050A300-CP 6

Label: 124

Label: 2

Material:A 400 (0.53t)White

Open Side

Height

Length

Width

Label: 2Label: 1

of 13


18.2 Carton

UNIT: mm


MODEL NO. :

18. PACKING

PART NO. :PAGE NO. :ISSUED DATE:REV: (B0)

2014.04.1110 OF 12HK-AJ-050A300-CP

HKSC-110369

310

335

445




19. MARKING

UNIT: mm



PAGE NO. :

REV: (B0)ISSUED DATE: 2014.04.11

11 OF 12HK-AJ-050A300-CP

HKSC-110369

year

M M Y Y C

month

made in China by Hon-kwang

200# CPC NAME-PLATE:WHITE CHARACTERS BLACK BACKGROUND.



13 0.1

INTÉRIEUR SEULEMENTPOUR UTILISATION À

14±0.1

ATTENTION

CASE NAME-PLATE: BLACK CHARACTERS WHITE BACKGROUND.

100V 50/60Hz 0.8A 37VA5V 3.0A

TUV RT P SE

ID 0000019930www.tuv.com

R

R2.0

2.52.5

19.5+0.0-0.2

TU VR h ein land G rou p

31.8+0.0-0.2

DRY LOCATION USE ONLY RISK OF ELECTRIC SHOCK

: HK-AJ-050A300-CP

: 5V 3.0A: 100-240V 50/60Hz 0.8A

60YM E202402

MODEL

CAUTION:

OUTPUTINPUT

I.T.E POWER SUPPLY

( )

MADE IN CHINA MMYYC

mmA004390

S&E

of 13

SPECIFICATION FOR APPROVAL - Farnell element14I.T.E. POWER SUPPLY 110369-0317 APR.11th.2014 (B0)...

Documents

Transcript of SPECIFICATION FOR APPROVAL - Farnell element14I.T.E. POWER SUPPLY 110369-0317 APR.11th.2014 (B0)...