SPECIALTY ABRASIVE PRODUCTS THATTARGET SPECIFIC NEEDS AND APPLICATIONS.

make it a pearl.

PEARL ABRASIVE CO. IS DEDICATED TO DEVELOPING A SPECIAL LINE OF “VISIONARY PRODUCTS AND TARGETED SOLUTIONS.”

Our differentiated or specialty products are designed to meet specific needs andapplications of manufactures, fabricators, installers or contractors. Pearl has designed andproduced these products utilizing the most advanced technology and foremost abrasivegrain mixtures that target specific applications. These unique products are manufacturedto provide optimal performance, quality and value.

33% more efficient33% more efficientTHAN STANDARD ALUMINUM OXIDE

HIGH PERFORMANCE ALUMINUM OXIDE.REDLINE™ MAX A.O. DEPRESSED CENTER GRINDING WHEEL

FOR USE ON:

• METAL • STAINLESS STEEL• IRON • FERROUS METALS• STEEL • HARD MATERIALS

5 reasons the Pearl Redline™ Max A.O. grinding wheel outperforms standard aluminum oxide:

1. Pearl’s innovative MAX A.O. super grain is highly efficient.MAX A.O. is a hybrid grain mixture with unique crystalline properties that enable individual grain particles to remain extremely sharp and durable. TheMAX A.O. grain has excellent friability characteristics that allow for optimally-timed fracturing of abrasive crystals, constantly exposing sharp cuttingedges to the work surface. The result is significantly increased efficiency and performance when compared to traditional aluminum oxide wheels.

5. Increased grinding efficiency.YOUR TIME IS VALUABLE! Manufacturers are constantly searching for ways of increasing productivity and are using efficiency ratings andproduction output to judge the effectiveness of abrasive products. The Pearl Redline™ MAX A.O. wheel has been designed with grinding efficiencyin mind, providing greater productivity for the operator.

3. Cooler grinding.Because the Redline™ MAX A.O. wheel runs significantly cooler than standard grinding wheels, it is ideal for applications in which burning thematerial can be a problem. The MAX A.O. wheel dissipates heat better than standard aluminum oxide grinding wheels, resulting in increasedperformance and less chance of marring the workpiece.

4. Non-loading.The multiple cutting edges of the MAX A.O. grain combined with the enhanced resin mixture result in stock removal rates that are significantly higher thanstandard grinding wheels. In addition, the constant renewal of fresh cutting edges greatly decreases wheel loading, ensuring consistent performance.

High performance products usually come with a high price. Not the Redline™ MAX A.O. It was specifically designed to offeraluminum oxide users a high performance alternative at a standard performance price. The Redline™ MAX A.O. wheel does thisthrough a unique combination of grain properties and resin bond technology that truly sets it apart from the competition.

How does the MAX A.O. compare to other aluminum oxide wheels?

2. Less vibration.The Redline™ MAX A.O. wheel’s combination of a proprietary bonding system and the MAX A.O. grain create a wheel that offers near perfectbalance, with significantly less vibration or “wheel chatter.” This is extremely helpful in improving grinding efficiency and grinding speed. It is alsovery helpful in making the wheel user friendly, decreasing both operator fatigue and wear on the angle grinder.

FRIABILITY

LOADING

Gemini

Universal LineA24L PSF

Xpert A30BF

Fast GrindA30S

Sait GrindA24N-BF

PEARL REDLINE™

GR

IND

ING

RAT

IO

Pearl Redline™ has the best Price/Performance ratio on the market!

FOR PIPELINE

PT. NUMBER SPECS GRIT MAX RPMDCRED40 4" x 1/4 x 5/8 A/WA24R 13,700DCRED45 4-1/2" x 1/4 x 7/8 A/WA24R 13,300DCRED45H 4-1/2" x 1/4 x 5/8-11 A/WA24R 13,300DCRED50 5" x 1/4 x 7/8 A/WA24R 12,000DCRED50H 5" x 1/4 x 5/8-11 A/WA24R 12,000DCRED70 7" x 1/4 x 7/8 A/WA24S 8,500DCRED70H 7" x 1/4 x 5/8-11 A/WA24S 8,500DCRED90 9" x 1/4 x 7/8 A/WA24S 6,500DCRED90H 9" x 1/4 x 5/8-11 A/WA24S 6,500

DCRED45P 4-1/2" x 1/8 x 7/8 A/WA30S 13,300DCRED45PH 4-1/2" x 1/8 x 5/8-11 A/WA30S 13,300DCRED50P 5" x 1/8 x 7/8 A/WA30S 12,000DCRED50PH 5" x 1/8 x 5/8-11 A/WA30S 12,000DCRED70P 7" x 1/8 x 7/8 A/WA30S 8,500DCRED70PH 7" x 1/8 x 5/8-11 A/WA30S 8,500DCRED90P 9" x 1/8 x 7/8 A/WA30S 6,500DCRED90PH 9" x 1/8 x 5/8-11 A/WA30S 6,500

T-27

OUTPERFORMS THE COMPETITION!

it’s all about the grain...

FASTEST WHEELON THE MARKET

FASTEST WHEELON THE MARKET

OUTPERFORMS ZIRCONIA

SRT™ SERIES DEPRESSED CENTER GRINDING WHEEL

FOR USE ON:

• STAINLESS STEEL• HIGH TENSILE ALLOYS

0 50 100 150 200 250 300 350 400

PEARL DCSRT™

NortonNorzon

WalterA30SS

Pferd Inox

RexcutA36GFX

SaitAttacker

STO

CK R

EMO

VAL

(g)

5 reasons that SRT™ gets the best results:

1. Engineered grain.Most abrasive products are manufactured using the traditional trial and error method of bond development. SRT™ grain has beenengineered to last longer and consistently produce the highest quality finish of any product on the market today.

3. Heat buildup.Heat buildup causes an undesirable finish, SRT™ products have been engineered to run considerably cooler than competitiveproducts in the field. Better heat disbursement increases the performance as well as the appearance of the completed work.

Engineering products based on SRT™ Technology has brought about astounding results. It is not uncommon to get asmuch as 40% increased grinding efficiency. This is the result of the unique characteristics of Pearl’s proprietary SRT™grain and bond mixture.

How does SRT™ compare to other stainless steel grinding wheels?

2. Binding element.The proprietary bonding agents used to produce SRT™ products give the SRT™ grain its unique color, as well as providing morestrength and durability to the wheels. This in turn lessens the vibration the operator feels and improves the overall efficiency of theproduct.

4. Non-contaminating.Pearl's SRT™ grains are harder than other abrasive grains therefore they can penetrate and cut even the hardest materials such asstainless steel without contamination.

5. Superior quality finish.Pearl's SRT™ grains remain consistently sharp thus enabling the wheel to produce a consistent finish with increased grinding efficiency.

CONTAMINATE

PT. NUMBER SPECS GRIT MAX RPMDCSRT40 4 x 1/4 x 5/8 SRT24 13,700DCSRT45 4-1/2 x 1/4 x 7/8 SRT24 13,300 DCSRT45H 4-1/2 x 1/4 x 5/8-11 SRT24 13,300 DCSRT50 5 x 1/4 x 7/8 SRT24 12,000 DCSRT50H 5 x 1/4 x 5/8-11 SRT24 12,000 DCSRT70 7 x 1/4 x 7/8 SRT24 8,500 DCSRT70H 7 x 1/4 x 5/8-11 SRT24 8,500 DCSRT90 9 x 1/4 x 7/8 SRT24 6,500 DCSRT90H 9 x 1/4 x 5/8-11 SRT24 6,500

T-27

OUTPERFORMS THE COMPETITION!

D.A. SERIES DEPRESSED CENTER GRINDING WHEELS

DON'T RISK DAMAGING YOUR HIGH COSTMATERIALS WITH GENERAL PURPOSE WHEELS.

FOR USE ON:

• ALUMINUM • COPPER• BRONZE • BRASS• SOFT NON-FERROUS METALS

1. Pearl’s D.A. grain.Pearl’s D.A. Series grinding wheels are specially formulated to address the specific challenges of grinding soft non-ferrous metals. Pearl's proprietary D.A. abrasive grain and bonding agents are manufactured at high temperaturesto improve hardness and friability, this results in significantly improved wheel performance and life.

3. Non-loading.Pearl’s D.A. Series wheel is a grinding wheel that is both non-loading and highly efficient. D.A. wheels aredesigned for aggressive and consistent stock removal, as well as giving the workpiece an optimal surface finish.

4. Increased grinding efficiency.The D.A. Series is designed for both aggressive stock removal and one step finishing.

To overcome performance hurdles when grinding aluminum, Pearl engineered a grinding wheel with proprietary innovations that address this specific challenge.

2. Enhanced surface finish.Pearl's proprietary bonding agent allows the cutting edge of the grains to remain sharp, while at the same timeallowing the wheel to run cooler.

LOADING

General purpose grinding wheels do not perform at optimal levels when used on soft non-ferrous metals. The reasons are:

• Loading of the wheel results in slow grinding speeds. • Dulling of abrasive grains diminish grinding efficiency.• Heat buildup reduces grinding efficiency and affects material surface.

4 reasons to buy Pearl D.A. Series wheels:

DO YOU NEED TO GRIND ALUMINUM?DO YOU NEED TO GRIND ALUMINUM?

0 25 50 75 100 125 150

SAITA46N-BF

PEARL D.A. SERIES

STOCK REMOVAL (g)

OUTPERFORMS THE COMPETITION! PT. NUMBER SPECS GRIT MAX RPMDA4030 4 x 1/4 x 5/8 AL24M 13,700DA4510 4-1/2 x 1/4 x 7/8 AL24M 13,300DA4510H 4-1/2 x 1/4 x 5/8-11 AL24M 13,300DA5010 5 x 1/4 x 7/8 AL24M 12,000DA5010H 5 x 1/4 x 5/8-11 AL24M 12,000DA7020 7 x 1/4 x 7/8 AL24M 8,500DA7020H 7 x 1/4 x 5/8-11 AL24M 8,500

T-27

6 reasons to buy Pearl Greenback™ Maxidisc™:

EASY TRIM HAS NEVER BEEN EASIER!

TRIMMABLE, BETTER PRICE,BETTER FLAP BACKING.

TRIMMABLE, BETTER PRICE,BETTER FLAP BACKING.

GREENBACK™ MAXIDISC™ ZIRCONIA FLAP DISC

FOR USE ON:

• METAL • STAINLESS STEEL• IRON • FERROUS METALS• STEEL • HARD MATERIALS

1. Easy Trim backing saves time and money.Greenback’s™ nylon Easy Trim backing allows you to shave off the green backing as the flapswear down exposing more flap length. This translates into fewer wheel changes, saving youdown time thus reducing your product usage and labor cost.2. Non-warping nylon back.Greenback’s™ reinforced with fiberglass, gives the Greenback™ flap disc more strength anddurability than the competitions plastic back even under the most severe conditions. 3. Combination polyester/cotton flap.The best zirconia grains, on a special combination polyester/cotton flap, hold the grain moresecurely and resist clogging.4. Less vibrations.Greenbacks™ polyester/cotton flaps cushion the backing thus reducing vibration and noise. 5. Easy grit identification.Never wonder what grit you are putting on your grinder. Even after extensive use you canstill identify the grit.6. Runs cooler.Greenback’s™ exclusive outer coating, over the best premium Zirconia grains available, makethe Pearl Abrasive Greenback™ Maxidisc™ flap disc run cooler and last longer as well asproviding lubrication to prevent burn marks and discoloration of the finished material.

PT. NUMBER SPECS GRIT MAX RPMMAX4540ZG 4-1/2 x 7/8 Z40 13,300MAX4560ZG 4-1/2 x 7/8 Z60 13,300MAX4580ZG 4-1/2 x 7/8 Z80 13,300MAX5040ZG 5 x 7/8 Z40 12,000MAX5060ZG 5 x 7/8 Z60 12,000MAX5080ZG 5 x 7/8 Z80 12,000

T-27

“Take the Greenback™ Challenge:COMPARE AND SAVE!”

• EXTENDED LIFE60% more usable flap area than

standard disc

These larger flap areas make the disc last longer, runcooler and avoid glazing and clogging.

60%60%MOREMORE60%MORE60%MORE

FatMax™ Standard

EXTRA LONG LIFE GRINDING, BLENDING & SANDING

the pearl maxidisc SYSTEMthe pearl maxidisc SYSTEM™

RADIAL FLAP DISCS

• Stainless steel fabrication• Polishing• Grinding• Stock removal• Dairy equipment repair

• Weld blending• Liquid storage tanks• Cleaning• Finishing• Truck and autobody repair

• Edge chamfering• Burr removal• Sanding• Paint removal• Construction equipment repair

Ideal for the following typical applications and industries:

PT. NUMBER SPECS GRIT MAX RPMMAX4540ZJ9 4-1/2 x 7/8 Z40 13,300MAX4560ZJ9 4-1/2 x 7/8 Z60 13,300MAX4580ZJ9 4-1/2 x 7/8 Z80 13,300

T-29

• HEAVY STOCK REMOVAL• AGGRESSIVE GRINDING

AGGRESSIVESTOCK REMOVAL

PT. NUMBER SPECS GRIT MAX RPMMAX4536Z 4-1/2 x 7/8 Z36 13,300MAX4536ZH 4-1/2 x 5/8-11 Z36 13,300MAX4540Z 4-1/2 x 7/8 Z40 13,300MAX454ZH 4-1/2 x 5/8-11 Z40 13,300

T-27

Sharp zirconia grains aggressivelyremoves stock

Designed with extremely tough and sharp zirconiagrains and grinding agents that lubricate and reduce

heat, the fracturing characteristics of the grainscontinually expose sharp cutting edges.

• GRINDING• BLENDING• SANDING

GENERALPURPOSE

PT. NUMBER SPECS GRIT MAX RPMMX4040ZT 4 x 5/8 Z40 13,700MX4060ZT 4 x 5/8 Z60 13,700MX4080ZT 4 x 5/8 Z80 13,700MX4540ZT 4-1/2 x 7/8 Z40 13,300MX454ZTH 4-1/2 x 5/8-11 Z40 13,300MX4560ZT 4-1/2 x 7/8 Z60 13,300MX456ZTH 4-1/2 x 5/8-11 Z60 13,300MX4580ZT 4-1/2 x 7/8 Z80 13,300MX458ZTH 4-1/2 x 5/8-11 Z80 13,300MX5040ZT 5 x 7/8 Z40 12,000MX540ZTH 5 x 5/8-11 Z40 12,000

MX5060ZT 5 x 7/8 Z60 12,000MX560ZTH 5 x 5/8-11 Z60 12,000MX5080ZT 5 x 7/8 Z80 12,000MX580ZTH 5 x 5/8-11 Z80 12,000MX7040ZT 7 x 7/8 Z40 8,500MX740ZTH 7 x 5/8-11 Z40 8,500MX7060ZT 7 x 7/8 Z60 8,500MX760ZTH 7 x 5/8-11 Z60 8,500MX7080ZT 7 x 7/8 Z80 8,500MX780ZTH 7 x 5/8-11 Z80 8,500

T-27PT. NUMBER SPECS GRIT MAX RPMMX454Z9T 4-1/2 x 7/8 Z40 13,300MX454Z9TH 4-1/2 x 5/8-11 Z40 13,300MX456Z9T 4-1/2 x 7/8 Z60 13,300MX456Z9TH 4-1/2 x 5/8-11 Z60 13,300MX458Z9T 4-1/2 x 7/8 Z80 13,300MX458Z9TH 4-1/2 x 5/8-11 Z80 13,300

T-29

Multiple applications general purpose discSpecially developed as a general purpose disc that is bothversatile and at the same time a great value. Made with

sharp and tough zirconia grains for grinding, sanding andblending applications.

CHOOSE THE MAXIDISCTHAT IS RIGHT FOR YOU!

™

• HIGH PERFORMANCE• MAXIMUM VERSATILITY

HIGHPERFORMANCE

GRINDING, BLENDING & SANDING

PT. NUMBER SPECS GRIT MAX RPMMAX4540ZG 4-1/2 x 7/8 Z40 13,300MAX4560ZG 4-1/2 x 7/8 Z60 13,300MAX4580ZG 4-1/2 x 7/8 Z80 13,300MAX5040ZG 5 x 7/8 Z40 12,000MAX5060ZG 5 x 7/8 Z60 12,000MAX5080ZG 5 x 7/8 Z80 12,000

T-27

• STAINLESS STEELSTAINLESS STEEL

PT. NUMBER SPECS GRIT MAX RPMMAX4540ZS 4-1/2 x 7/8 Z40 13,300MAX4540ZSH 4-1/2 x 5/8-11 Z40 13,300MAX4560ZS 4-1/2 x 7/8 Z60 13,300MAX4560ZSH 4-1/2 x 5/8-11 Z60 13,300MAX4580ZS 4-1/2 x 7/8 Z80 13,300MAX4580ZSH 4-1/2 x 5/8-11 Z80 13,300

T-27

• ALUMINUM AND NON-FERROUS METALS

ALUMINUM

PT. NUMBER SPECS GRIT MAX RPMMAX4080C 4 x 5/8 C80 13,700MAX4120C 4 x 5/8 C120 13,700MAX4240C 4 x 5/8 C240 13,700MAX4320C 4 x 5/8 C320 13,700MAX4400C 4 x 5/8 C400 13,700MAX4600C 4 x 5/8 C600 13,700MAX4580C 4-1/2 x 7/8 C80 13,300MX4580CH 4-1/2 x 5/8-11 C80 13,300MAX4512C 4-1/2 x 7/8 C120 13,300MX4512CH 4-1/2 x 5/8-11 C120 13,300

MAX4524C 4-1/2 x 7/8 C240 13,300MX4524CH 4-1/2 x 5/8-11 C240 13,300MAX4532C 4-1/2 x 7/8 C320 13,300MX4532CH 4-1/2 x 5/8-11 C320 13,300MAX4540C 4-1/2 x 7/8 C400 13,300MX4540CH 4-1/2 x 5/8-11 C400 13,300MAX4560C 4-1/2 x 7/8 C600 13,300MX4560CH 4-1/2 x 5/8-11 C600 13,300MAX7080C 7 x 7/8 C80 8,500MX7080CH 7 x 5/8-11 C80 8,500

MAX7120C 7 x 7/8 C120 8,500MX7120CH 7 x 5/8-11 C120 8,500MAX7240C 7 x 7/8 C240 8,500MX7240CH 7 x 5/8-11 C240 8,500MAX7320C 7 x 7/8 C320 8,500MX7320CH 7 x 5/8-11 C320 8,500MAX7400C 7 x 7/8 C400 8,500MX7400CH 7 x 5/8-11 C400 8,500MAX7600C 7 x 7/8 C600 8,500MX7600CH 7 x 5/8-11 C600 8,500

T-27

Trimmable

Easy Trim back exposes more flap length reducing costly disc changes.

Combination polyester/cotton flapSpecial polyester/cotton flaps and a special bonding resin holdsthe grain to resist clogging and improve grinding efficiency.

Stainless SteelZirconia Grain

Active Grinding Agent

+A special premium zirconia grain and active grindingagent was specifically developed for stainless steel to

avoid overheating, glazing and discoloration of the work.It has exceptional stock removal properties.

GRINDING, BLENDING & SANDING

LIGHT GRINDING, BLENDING,SANDING, POLISHING & FINISHING

A blending of exceptionally sharp silicon carbidegrains coupled with a unique resin bond makesthis wheel work extremely well on aluminumand non-ferrous metals.

Silicon Carbide Grain

Pearl Abrasive flexible grinding wheels combine the benefits of depressedcenter grinding wheels, resin fiber discs (sanding discs) and flap discs intoone revolutionary product.

FLEXIBLE DEPRESSED CENTER GRINDING WHEELS

5 reasons the Pearl flexible grinding wheels give a better finish.1. Flexible wheels are extremely versatile.Pearl flexible grinding wheels combine the benefits of traditional fiber discs, grinding wheels and flap discsto produce a product that is truly versatile and capable of meeting all your grinding, shaping, finishing orsanding needs.

2. Increase grinding surface area.Because of their flexibility, there is more wheel surface on the material being ground, making for fastergrinding efficiency.

3. Superior surface finish.When a smooth finish is important and contours and corners have to be blended, flexible wheels get the jobdone.

4. Less vibration.A flexible grinding wheel absorbs vibration resulting in less fatigue and downtime.

5. Exclusive non-woven reinforcement.Pearl Abrasive flexible wheels are double-reinforced with a top layer of non-woven fabric and an internallayer of reinforcing cloth. This adds the element of safety and stability to the wheel.

GRINDING, SHAPING, FINISHING OR SANDING...GRINDING, SHAPING, FINISHING OR SANDING...ONE WHEEL DOES IT ALL.ONE WHEEL DOES IT ALL.

+ =FIBER DISC

GRINDINGWHEEL

+FLAPDISC

MAXIMUMVERSATILITY

FLEXIBILITYINCREASES GRINDINGSURFACE

NON-WOVENFABRIC

REINFORCEDCLOTH

GRAIN

GRAIN

T-27

HIGHPERFORMANCE

PT. NUMBER SPECS GRIT MAX RPMFLEX4036 4 x 1/8 x 5/8 SRT 36 13,700FLEX4046 4 x 1/8 x 5/8 SRT 46 13,700FLEX4060 4 x 1/8 x 5/8 SRT 60 13,700FLEX4080 4 x 1/8 x 5/8 SRT 80 13,700FLEX4120 4 x 1/8 x 5/8 SRT 120 13,700FLEX4536 4-1/2 x 1/8 x 7/8 SRT 36 13,300FLEX453H 4-1/2 x 1/8 x 5/8-11 SRT 36 13,300FLEX4546 4-1/2 x 1/8 x 7/8 SRT 46 13,300FLEX454H 4-1/2 x 1/8 x 5/8-11 SRT 46 13,300FLEX4560 4-1/2 x 1/8 x 7/8 SRT 60 13,300FLEX456H 4-1/2 x 1/8 x 5/8-11 SRT 60 13,300FLEX4580 4-1/2 x 1/8 x 7/8 SRT 80 13,300FLEX458H 4-1/2 x 1/8 x 5/8-11 SRT 80 13,300

FLEX4512 4-1/2 x 1/8 x 7/8 SRT 120 13,300FLEX451H 4-1/2 x 1/8 x 5/8-11 SRT 120 13,300FLEX7036 7 x 1/8 x 7/8 SRT 36 8,500FLEX736H 7 x 1/8 x 5/8-11 SRT 36 8,500FLEX7046 7 x 1/8 x 7/8 SRT 46 8,500FLEX746H 7 x 1/8 x 5/8-11 SRT 46 8,500FLEX7060 7 x 1/8 x 7/8 SRT 60 8,500FLEX760H 7 x 1/8 x 5/8-11 SRT 60 8,500FLEX7080 7 x 1/8 x 7/8 SRT 80 8,500FLEX780H 7 x 1/8 x 5/8-11 SRT 80 8,500FLEX7120 7 x 1/8 x 7/8 SRT 120 8,500FLEX712H 7 x 1/8 x 5/8-11 SRT 120 8,500

FLEXTRON™ SRT™ SERIESFOR USE ON:• STAINLESS STEEL• FERROUS METALS• IRON• STEEL• HIGH TENSILE

ALLOYS

STAINLESS STEELPT. NUMBER SPECS GRIT MAX RPMFWA7024 7 x 1/8 x 7/8 WA24 8,500FWA7024H 7 x 1/8 x 5/8-11 WA24 8,500FWA7036 7 x 1/8 x 7/8 WA36 8,500FWA7036H 7 x 1/8 x 5/8-11 WA36 8,500FWA7046 7 x 1/8 x 7/8 WA46 8,500FWA7046H 7 x 1/8 x 5/8-11 WA46 8,500

FOR USE ON:• STAINLESS STEEL• HIGH TENSILE ALLOYS

ALUMINUMPT. NUMBER SPECS GRIT MAX RPMFCC7036 7 x 1/8 x 7/8 CC36 8,500FCC7036H 7 x 1/8 x 5/8-11 CC36 8,500FCC7046 7 x 1/8 x 7/8 CC46 8,500FCC7046H 7 x 1/8 x 5/8-11 CC46 8,500

FOR USE ON:• ALUMINUM• CAST IRON• NON-FERROUS METALS

GENERALPURPOSE

PT. NUMBER SPECS GRIT MAX RPMFAC4036 4 x 1/8 x 5/8 AC36 13,700FAC4046 4 x 1/8 x 5/8 AC46 13,700FAC4060 4 x 1/8 x 5/8 AC60 13,700FAC4080 4 x 1/8 x 5/8 AC80 13,700FAC4120 4 x 1/8 x 5/8 AC120 13,700FAC4536 4-1/2 x 1/8 x 7/8 AC36 13,300FAC4536H 4-1/2 x 1/8 x 5/8-11 AC36 13,300FAC4546 4-1/2 x 1/8 x 7/8 AC46 13,300FAC4546H 4-1/2 x 1/8 x 5/8-11 AC46 13,300FAC4560 4-1/2 x 1/8 x 7/8 AC60 13,300FAC4560H 4-1/2 x 1/8 x 5/8-11 AC60 13,300FAC4580 4-1/2 x 1/8 x 7/8 AC80 13,300FAC4580H 4-1/2 x 1/8 x 5/8-11 AC80 13,300FAC7024 7 x 1/8 x 7/8 AC24 8,500FAC7024H 7 x 1/8 x 5/8-11 AC24 8,500FAC7036 7 x 1/8 x 7/8 AC36 8,500

FAC7036H 7 x 1/8 x 5/8-11 AC36 8,500FAC7046 7 x 1/8 x 7/8 AC46 8,500FAC7046H 7 x 1/8 x 5/8-11 AC46 8,500FAC7060 7 x 1/8 x 7/8 AC60 8,500FAC7060H 7 x 1/8 x 5/8-11 AC60 8,500FAC7080 7 x 1/8 x 7/8 AC80 8,500FAC7080H 7 x 1/8 x 5/8-11 AC80 8,500FAC7120 7 x 1/8 x 7/8 AC120 8,500FAC7120H 7 x 1/8 x 5/8-11 AC120 8,500FAC9036 9 x 1/8 x 7/8 AC36 6,500FAC9036H 9 x 1/8 x 5/8-11 AC36 6,500FAC9046 9 x 1/8 x 7/8 AC46 6,500FAC9046H 9 x 1/8 x 5/8-11 AC46 6,500FAC9060 9 x 1/8 x 7/8 AC60 6,500FAC9060H 9 x 1/8 x 5/8-11 AC60 6,500

ALUMINUM OXIDEFOR USE ON:• FERROUS METALS• IRON• STEEL• STAINLESS STEEL

CHOOSE THE FLEXIBLE GRINDINGWHEEL THAT IS RIGHT FOR YOU!

SURFACE PREPARATION WHEELS

surface preparationsurface preparationQuick & cleanQuick & cleanFOR USE ON:• ALUMINUM • CHROME PLATE • GLASS• BRASS • STAINLESS STEEL • PLASTIC• COPPER • TITANIUM • BRONZE• NICKEL • CERAMICS• STEEL • IRON

Pearl Abrasive surface preparation wheels are designed and engineered of a dense, non-woven synthetic fiber fusedwith an abrasive grain that quickly finishes the surface. Manufactured and constructed to clean, blend, condition,debur, finish and more.

1. The operator is provided with a controlled, sustained finish.2. Surface preparation wheels prevent undercutting and gouging when grinding.3. Wheels run cooler than coated or bonded abrasives, which lessens the chance of warping or discoloring of the workpiece.4. Reduces the number of grinding steps to obtain the required finish.5. Non-warping, rigid nylon backing allows the wheel to be used on standard angle grinders.

• Surface preparation before coating and painting.• Remove rust, paint and oxidation.• Remove weld marks and weld splatter.• Remove coating and gasket residues.• Excellent for blending and finishing engine propellers.• Provides a decorative finish on stainless steel.

• Remove blemishes after welding stainless steel.• Excellent for use in automotive body and paint repair.• Excellent for cleaning equipment.• Use in marine construction.• Use on food processing equipment.• Use in steel and stainless steel fabrication.

Reasons to use Pearl surface preparation wheels:

Ideal for the following typical applications and industries:

FOR USE ON:• FERROUS METALS • IRON• SHEET METAL • STEEL• STAINLESS STEEL • NICKEL

PT. NUMBER SPECS GRIT MAX RPMNW4MF 4 x 5/8 Fine 13,700NW45MF 4-1/2 x 7/8 Fine 13,300NW45MFH 4-1/2 x 5/8-11 Fine 13,300NW7MF 7 x 7/8 Fine 8,500NW7MFH 7 x 5/8-11 Fine 8,500

ALUMINUM OXIDE MAROONFOR USE ON:• NON-FERROUS METALS• BRONZE • GLASS• ALUMINUM • PLASTIC• BRASS • COPPER

PT. NUMBER SPECS GRIT MAX RPMNW4GSF 4 x 5/8 Super Fine 13,700NW45GSF 4-1/2 x 7/8 Super Fine 13,300NW45GSFH 4-1/2 x 5/8-11 Super Fine 13,300NW7GSF 7 x 7/8 Super Fine 8,500NW7GSFH 7 x 5/8-11 Super Fine 8,500

SILICON CARBIDE GREY

T-27

THIN CUT-OFF WHEELSTHIN CUT-OFF WHEELSSLIMCUTSLIMCUTFOR USE ON:• FERROUS METALS • NON-FERROUS METALS • BRASS• STAINLESS STEEL • SHEET METAL • BRONZE• STEEL • COPPER • ALUMINUM• IRON

SLIMCUT™ THIN CUT-OFF WHEELS (T-1 & T-27)

™

Pearl Abrasive has an expanded line of thin cut-off wheels that meet avariety of performance standards and price demands.

Ideal for the following typical applications and industries:

1. Fast cutting.2. Burr-free.3. Minimal stock removal.4. Externally reinforced for added safety.5. Available in Type-1 and Type-27.

Choose the Slimcut™ cut-off wheel that meets your pricing and performance needs.

• Angle iron• Thin wall tubing• Rebar cutting• Extruded bar stock

• Pipe• Automotive• Aerospace• Foundries

• Electronics• Food processing• Farming• Ship building

• Light guage metals• Aluminum siding and gutter work• Stainless steel tank repair• Sheet metal and welding shops

THE ULTIMATE BLEND OFPERFORMANCE AND PRICE.

LONG LIFE AND COOLAGGRESSIVE CUTTING.

PROPRIETARY HIGHPERFORMANCE GRAIN FOREXCEPTIONAL CUTTINGSPEED AND LIFE.

Cut made with Slimcut™

cut-off wheel

Cut made with standard cut-off wheel

OUTPERFORM THE COMPETITION!

PT. NUMBER SPECS GRIT MAX RPMCW4532A 4-1/2 x .040 x 7/8 A46 13,500CW0532A 5 x .040 x 7/8 A46 12,200CW0532B 5 x .040 x 5/8 A46 12,200CW0632A 6 x .040 x 7/8 A46 10,200CW0632B 6 x .040 x 5/8 A46 10,200CW0632C 6 x .040 x 1/2 A46 10,200CW0632D 6 x .040 x 3/8 A46 10,200CW0732A 7 x .040 x 7/8 A46 8,500

DCW04A 4 x .045 x 5/8 A46 13,700DCW45A 4-1/2 x .045 x 7/8 A46 13,500DCW05A 5 x .045 x 7/8 A46 12,200DCW06A 6 x .045 x 7/8 A46 10,200DCW07A 7 x .045 x 7/8 A46 8,500

PRO-V™ SLIMCUT™ PEARL SLIMCUT™ REDLINE™ SLIMCUT™

T-1

T-27

PT. NUMBER SPECS GRIT MAX RPMPVCW4532A 4-1/2 x .040 x 7/8 A46 13,500PVCW0532A 5 x .040 x 7/8 A46 12,200PVCW0632A 6 x .040 x 7/8 A46 10,200

PVDCW45A 4-1/2 x .045 x 7/8 A46 13,500PVDCW05A 5 x .045 x 7/8 A46 12,200PVDCW06A 6 x .045 x 7/8 A46 10,200

T-1

T-27

PT. NUMBER SPECS GRIT MAX RPMCWRED4532A 4-1/2 x .040 x 7/8 A46 13,500CWRED0532A 5 x .040 x 7/8 A46 12,200CWRED0632A 6 x .040 x 7/8 A46 10,200

DCWRED45A 4-1/2 x .045 x 7/8 A46 13,500DCWRED05A 5 x .045 x 7/8 A46 12,200DCWRED06A 6 x .045 x 7/8 A46 10,200

T-1

T-27

LOS ANGELES, CALIFORNIA USA6210 South Garfield Ave.,Commerce California 90040-3613TEL: 562-927-5561 • FAX 562-928-3857Toll Free: 800-969-5561 • Fax: 866-515-7569

ONTARIO, CANADA375 Pido Road, Peterborough, Ontario Canada, K9J-6X7TEL: 705-741-6447 • FAX 705-741-6460Toll Free: 800-387-0008 • Fax: 800-331-1961

GEORGIA, USA4761 Hugh Howell Rd., Suite NTucker, GA 30084-5024

www.pearlabrasive.com

©Pearl Abrasive Co. 0607 • #SPABRFLYR07