SPECIALIST CATALOGUE „Fall protection systems personal ...
Transcript of SPECIALIST CATALOGUE „Fall protection systems personal ...
Fall protection systems
Personal protective equipment for the prevention of falls
2015
FULL CATALOGUE
www.carlstahl-fallprotection.com
FALL PROTECTION SYSTEMS -
PERSONAL PROTECTIVE EQUIPMENT FOR THE PREVENTION OF FALLS 2015
Dear customers,
Welcome to the new specialist catalogue ‘Fall protection systems – personal
protective equipment for the prevention of falls 2015’. Its 148 pages high-
light our international expertise in this area. Its compact and clear layout
provides you with a comprehensive overview of our full range of products
and services, which we have continuously improved and expanded over the
years.
This year, we once again promise to provide outstanding service and
product quality. With 61 sites throughout the world, we are there where you
need us to support you as a highly qualified partner. We not only ensure that
our own employees are optimally trained, we also offer you training and
development measures in the form of several specialist courses run
throughout the year to expand your knowledge in the field of fall protection
systems and personal protective equipment for the prevention of falls. We
would be delighted to see you at one or more courses at the Carl Stahl
Academy or one of the other training sites.
Your safety is also our utmost concern when it comes to the daily use of
products from the field of personal protective equipment for the prevention
of falls. Our inspection and repair service is therefore available throughout
Germany to conduct the legally required annual inspection.
Use our comprehensive range of products and services.
We look forward to hearing from you!
2 www.carlstahl-fallprotection.com
www.carlstahl-fallprotection.com 3
WWW.CARLSTAHL-FALLPROTECTION.COM
We are there where you need us.
61 subsidiaries wordwide. Please see
page 147 or visit our website
www.carlstahl-fallprotection.com for more
information.
The unbeatable advantages offered by Carl Stahl
One-stop serviceExecution of installation and assembly work by
specialist personnel with the appropriate specialist
qualifications.
On-site consultancy servicesWe have contacts near you. See page 147 for
information.
On-site testing and repair servicesAnnual inspection in accordance with the applicable
laws and standards on fall protection systems and
personal protective equipment (PPE) for the preven-
tion of falls.
Comprehensive range of specialist coursesRecognised experts share their knowledge. For fur-
ther information, please see page 142 onwards.
QuotationsTender preparation on the basis of your planning
documents including preliminary structural analysis
with the key load figures.
Reliable planningSupport during all planning phases of the fee sched-
ule for architects and engineers (HOAI) and the
preparation of tender texts including CAD planning.
Customer-specific solutionsAdaptation of systems and PPE to special structures.
Specialist expertiseSpecial advice on existing systems including needs
analysis.
We will come to youOn-site meetings to clarify factual and specialist
questions including building stock photos.
ABS 74-81
• Lifelines 74• Anchorage points 75• Retractable type fall arresters 76-77• Rotating cantilever beam system 78-79• Anchorage system 80-81
PROTECTA 26-40
• Fall arrest harnesses 26-29• Lanyards, connectors, fall arresters 30-33• Retractable type fall arrester 34• Fall protection kits 35• Horizontal lifeline systems 36-37• Vertical lifeline systems 38• Lifeline systems for self-assembly/anchorage point 39• Working in confined spaces 40
4 www.carlstahl-fallprotection.com
Contents
Page
Product overview of harnesses, kits, retractable type fall arresters, karabiners and lanyards 6-16
X-TEND 22-23
• Horizontal cable mesh as fall protection 22-23
Dani Alu 18-21
• Safety railings as a form of collective protection on flat roofs 18-21
DBI-SALA 42-73
• Fall arrest harnesses and waistbelts 42-47• Anchorage points 48-52• Lanyards 53• Retractable type fall arresters 54-57• Horizontal lifeline systems 58-62• Working in confined spaces, rescue and retrieval 63-69• Portable fall arrest post 70-73
Rollgliss 41
• Rescue equipment and descenders 41
HUCK 24-25
• Safety nets 24• Side protection nets 25
Introduction 17
BEAL 126
• Ropes and accessories 126
PETZL 112-139
• Fall arrest harnesses, seat harnesses and work positioning harnesses 112-113• Helmets, accessories 114-117• Lanyards 118-120• Guided type fall arresters 121-123• Karabiners, connectors 124-125• Accessories 127• Descenders, rope clips, pulleys 128-133• Lanyards and anchor straps, bolt hangers and pitons 134-135• Headlamps 136-139
www.carlstahl-fallprotection.com 5
IKAR 110-111
• Retractable type fall arresters with and without a rescue lifting device 110• Rescue kit 111
Rescue ladders 140
Standards and regulations 141
Courses and training 142-143
International offices 147
Honeywell 100-109
• Fall arrest harnesses and waistbelts 100-105• Connectors, lanyards 106-107• Retractable type fall arresters, load securing equipment 108-109
RUD 82-83
• Anchorage points 82-83
Skylotec 88-99
• Fall arrest harnesses and waistbelts 89-91• Guided type fall arresters, helmets 91• Lanyards, Guided type fall arresters 92-95• Horizontal lifeline systems, karabiners, rescue equipment, ropes, accessories 96-99
Page
Contents
Tractel descent / rescue equipment 84-87
• Tripod with equipment 84• Guided type fall arresters 85• Anchorage points 86• Retractable type fall arresters 87
6 www.carlstahl-fallprotection.com
Fall arrest harnesses and work positioning belts, kits
1-point fall arrestharnessmanual lock
2-point fall arrest harnessmanual lock
Hi-Vis Jacket harnessmanual lock
3-point fall arrest harnessmanual lock
2-point welding fall arrest harnessmanual lock
FLEXA fall arrest harnesspin lock, manual
FLEXA fall arrest harnessautomatic lock
5-point fall arrest and workpositioning harnessmanual lock
5-point fall arrest and workpositioning harnessmanual lock
Page 26-40
The new series of PRO™ fall arrest and work positioning harnesses
KIT 1for vertical standard work within industryand construction
KIT 2für vertical standard work within industryand construction
KIT 3 for vertical work and restraint systems
KIT 4 for work in steel construction/bridge construction
Fall arrest kits
www.carlstahl-fallprotection.com 7
Fall arrest and work positioning harnesses
Page 42-47
2-point fall arrestharnessautomatic lock
1-point fall arrestharnessautomatic lock
2-point fall arrestharnessautomatic lock
4-point fall arrest andwork positioning harnessautomatic lock
2-point fall arrest harnessautomatic lock
4-point fall arrest andwork positioning harnessautomatic lock
2-point fall arrest harnessautomatic lock
4-point fall arrest and workpositioning harnessautomatic lock
5-point fall arrest and workpositioning harnessautomatic lock
4-point fall arrest harnessand work positioning harness automatic lock
4-point Rescue fall arrestharnessautomatic lock
4-point Suspension fall arrest and work positioning harnessautomatic lock
1-point Nomex®/Kevlar® fall arrestharnessmanual lock
The new Delta™ fall arrest harnesses Exo-Fit™ fall arrest and work positioning harnesses
Exo-Fit™ Nex fall arrest and work positioning harnesses
Delta™ II heat resistant fall arrest harnessExo-Fit™ Nex Rescue Exo-Fit™ Nex Suspension fall arrest and workpositioning harness
8 www.carlstahl-fallprotection.com
1-point fall arrestharnessmanual + automatic
1-point fall arrestharnessmanual + automatic
2-point fall arrestharnessmanual + automatic
2-point fall arrestharnessmanual + automatic
2-point fall arrestharnessmanual + automatic
Fall arrest and work positioning harnesses
2-point fall arrestharnessmanual + automatic
2-point fall arrestharnessmanual lock
5-point fall arrest harness/work positioning beltautomatic lock
4-point fall arrest harness/work positioning beltmanual lock
2-point fall arrestharnessautomatic lock
Duraflex fall arrest and work positioning harnesses, AGU and R2 and R6 Revolution
4-point fall arrest and workpositioning harness, Formotion Wind,automatic lock
4-point fall arrest and workpositioning harness, Utility, automatic lock
2-point fall arrestharnessmanual lock
4-point fall arrest and workpositioning harnessmanual lock
4-point fall arrest and workpositioning harnessmanual lock
2-point fall arrest harnessautomatic lock
4-point fall arrest and workpositioning harnessautomatic lock
Fall arrest and work positioning harnesses
Page 100-105
The new H-Design™ fall arrest and work positioning harnesses
Page 89-91
www.carlstahl-fallprotection.com 9
2-point fall arrestharnessautomatic lock
Spreaderwith carabiners
2-point fall arrestharnessautomatic lock
4-point fall arrest and workpositioning harnessautomatic lock
4-point fall arrest and workpositioning harnessautomatic lock
3-point work positioning seat harnessautomatic lock
Fall arrest and work positioning harnesses, lanyards, holding devices
Fall arrest, seat harnesses and work positioning harnesses
Page 112-113
Shock absorbing and positioning lanyards
PRO™ Stretch shock absorbinglanyard
„Trigger“ positioning lanyard
EZ Stop™ alternatives
Web positioning lanyardrope lanyard
PRO™ Stretch shock absorbinglanyard edge-tested
Shock absorbing lanyardY-Shock absorbing lanyard
Shock absorbing lanyard
Sanchoc™ rope shock absorbinglanyard
AM450/80
Page 30-32
Page 53
EZ STOP™ edge-tested lanyards, lengths from 1.50 m to 2.00 m
Shock absorbing and positioning lanyards, lengths from 1.50 to 2.00 m
Y-Shock absorbing lanyard
10 www.carlstahl-fallprotection.com
SHOCKYARD FLEX SHOCKYARD FLEX V BFD SK 12
LOOP SEP 40 KN
BFD Y SK12
TITANTM positioning sling
Positioning ropeHandZup®
ERGOGRIP SK 12SKYSAFE PRO FLEX
LOOP 35 kN LOOP 35 kN
Manyard® edgeEdge-tested
D12 edge-tested
Positioning slings, lanyards
Page 92-95
Positioning slings, length 0.40 m to 2.00 m
ERGOGRIP SK 16, length 5.00 m to 25.00 mLanyards, length 1.50 m to 2.00 m
Page 106-107
Positioning sling, length 0.60 m to 1.50 m Lanyards, length 1.50 m to 2.00 m
Lanyards, length 1.50 m to 2.00 m
www.carlstahl-fallprotection.com 11
Mobile fall arrest devices
ERGOGRIP SK 16 - FS
Mobile fall arrest devices
Page 85
Mobile fall arrest devices
Page 93
Mobile fall arrest devices
Page 33
Mobile fall arrest devices, descenders and accessories
Page 122-123, 129
AC202/01 AC202/03 AC4002
Stopfor™ K Stopfor™ KSM
ASAP B71ALU ASAP B71AAA ASAP’SORBER D21A D21AN
12 www.carlstahl-fallprotection.com
Lanyards
JANE L50Lanyard
GRILLON-alternatives ABSORBICA-alternatives
ABSORBICA-MGO-alternatives
Lanyards, length 0.80 m to 1.50 m GRILLON, length 2.00 m to 20.00 m
Page 118-120
www.carlstahl-fallprotection.com 13
Karabiners
M37 SL M37 TL OXAN M72 SL OXAN M72 SLN OXAN M72 TL OXAN M72 TLA OXAN M72 TLN
VULCAN M73 SL VULCAN M73 SLN VULCAN M73 TL VULCAN M73 TLA VULCAN M73 TLN
MGO60
H-037 OVALSTEEL S H-129 STEEL D TW PassO-SC PassO-TRI PassO-TW
P11 / P11-8 P15 P18
screw karabinerAJ 501
automatic karabinerAJ 514
automatic karabinerAJ 521
manual grabAJ301
M33 SL M33 TL M34 SL M34 TL M36 SL M36 TL
OVALOY CS BLACK OVALOY TW OVALSTEEL SC TW OVALSTEEL TRI OVALOY TRI
VIPER TRI VIPER TW VIPER SC
Page 32
Page 96
Page 124-125
14 www.carlstahl-fallprotection.com
Page 34
Page 55-56, 68
Retractable type fall arresters, lengths from 3.00 m to 30.00 m
Retractable type fall arresters, lengths from 2.00 m to 53.00 m
Rebel™ , polyester webRebel™ , galvanized steelwire rope
Sealed retractable type fall arrester with rescue crank arm
NANO-LOK NANO-LOK Edge
Rebel™ , galvanized steelwire rope
Retractable type fall arresters
Page 87
Retractable type fall arresters, lengths 5.00 m, 6.00 m and 10.00 m
Blocfor 10 AES Blocfor 5 ESD
www.carlstahl-fallprotection.com 15
Retractable type fall arresters and load arresters
Seite 110-111
Retractable type fall arresters, edge-tested, length from 2.00 m to 18.00 m without edge-test from 2.00 m to 33.00 m
Page 107-109
Retractable type fall arresters, length from 2.00 m to 20.00 m Load arresters 200 kg to 500 kg, not a PPE!
TurboLite Falcon 6-2000L Falcon Load arrester
IKAR flexible IKAR flexible IKAR HRA
16 www.carlstahl-fallprotection.com
Helmets
A10SRA A10SWA
Page 91
Helmets
BE-016-BL BE-016-OR BE-016-RO BE-016-SWM BE-016-SWS BE-016-WE
A10BYA
A10BWA A10BRA
A10BNA
A10BOA
A10BBA A10VYA
A10VWA A10VRA
A10VNA
A10VOA
A10VBA
A20BYA A20BWA A20BRA A20VYA A20VWA A20VRA
VERTEX BEST A10 B VERTEX VENT A10 V
ALVEO BEST A20 B
VERTEX ST A10 S
ALVEO VENT A20 V
Page 114-117
www.carlstahl-fallprotection.com 17
Introduction
Combating challenges in the construction industry
We know that there is no more complex work environment than a construc-
tion site. Not only is the construction environment constantly changing as
the work progresses, but the industry itself is always innovating, with new
procedures and materials that present new challenges for your fall protec-
tion planning.
Construction sites require a full range of fall protection solutions to meet the
needs of a dynamic yet safe workplace. Our customers therefore turn to
Carl Stahl for industry expertise, superior-quality products and continual
systems innovation.
While Carl Stahl operates with a commitment to safety and quality, each of
the brands it offers has their own objectives. For example, PROTECTA rep-
resents standard equipment with exceptional value and is committed to reli-
ability, quality and cost-effectiveness. DBI-SALA represents the ultimate in
fall protection for any work environments and is committed to offering an ex-
cellent, innovative and broad product range.
Together, the two brands offer our customers access to the most compre-
hensive range of products.
The world’s most technologically advanced safety equipment is developed
through the combination of experience, knowledge and state-of-the-art out-
door and indoor testing procedures. This equipment more than complies
with both national and international standards, including OSHA, ANSI, CSA
and CE. We call this ‘creating a contemporary safety standard’.
Your partner for safety
Our services do not end with the sale of products. The trained profes-
sionals at Carl Stahl offer teaching and training measures as well as
comprehensive long-term support to ensure the success of all aspects
of your fall protection programme.
Collective protective measures take absolute priority. The use of per-
sonal protective equipment (PPE) is regarded as a last resort and is
only permitted if it is not possible or too time and cost-intensive to
install railings or scaffolding or to use lifting platforms.
This catalogue has been specially developed for the protection of
people working at heights in industry, in particular in the construction
industry.
Personal fall protection in industryThe ABC of personal fall protection.
Carl Stahl provides a full array of passive and
active fall protection systems. The basic
principles behind every personal fall protection
system can be described using the ABC of fall
protection.
ANCHORAGE
Fall protection system should only ever be
anchored by secure attachment points (on a
structure with sufficient load-bearing
capacities). The type of anchorage point
depends on the construction, the work to
be carried out, the installation method and
the available structure. The anchorage provides
a means of connecting personal protective
equipment to the available construction.
BODY SUPPORT
Fall arrest harnesses provide one or more
connection points, which can be used to
connect the person to the personal fall
protection system. Depending on the appli-
cation, they can be used as part of a system that
prevents the person from falling and to limit the
extent of potential injury if a fall does occur.
CONNECTORS
Connector are devices that connect the worker’s
fall arrest harness to the anchorage system.
Connectors include lanyards, snap hooks,
karabiners, energy absorber devices and
special systems such as retractable type
fall arresters, ladder systems, guided type
fall arresters including a flexible anchor line and
rope grabs.
DESCENT/RESCUE
The descent and rescue of a person who has
fallen are essential parts of any fall protection
programme.
A
B
C
D
18 www.carlstahl-fallprotection.com
Collective protection, aluminium safety railings
Aluminium safety railings for collective protection on flat roofs onnew and old buildings
Carl Stahl Service, that convinces!
The Barrial®-system basically consists of three types of railing:
• Barrial® fixed• Barrial® self-supporting • Barrial® folding
Depending on the property, fastening area, installation method and visual and
functional requirements, the different shoe types, post types and options offer a
broad range of usage and design options.
The simple installation of the fully-compatible components and their ability to be
adjusted is highly rated on construction sites.
The surface treatment (Danilac) in the factory-own powder coating system
also makes it possible to individually adapt the colour of the Barrial railings
to that of the property.
Comprehensive, professional support from planning through to implementation
We support you throughout all your project planning phases:
• Safety analysis
• Clarification of technical details
• Proposal of suitable solutions
• Measurements on the construction site
• Planning using special Danisoft software
• Products supplied made-to-measure and
with a layout drawing
• Technical support during installation
• After-sales service
Railing type Installation area in
several shoe types
Barrial fixed Inside of parapet wall
Pillar Post
foldablestraight
4
rounded
4
inclined
15° / 30° / 45°
4
Parapet
capping option
4
Skirting
option
Barrial fixed Facade 4 4 4 4
Barrial fixed On parapet wall 4 4 4 4 4
Barrial fixed On roof surface 4 4 4 4 4
Barrial self-supporting On roof surface 4 4 4 4 4 4 4
Barrial folding Inside of parapet wall 4 4
Barrial folding On parapet wall 4 4
Height- and depth variable consoles for installation in insulated parapet walls available.
For further information please contact your local Carl Stahl dealer!
Colour varietyDue to its filigree optic the railing in painted version (250 RAL colours to choose) perfectly fitsto the structure of the building.
Type
Barrial aluminium-safety railing
Item no.
49G10000
Barrial rooflight dome railing 49LK1000
Barrial corridor 49K10000
Installation Barrial 49M00000
Price/€
project-related
project-related
project-related
project-related
www.carlstahl-fallprotection.com 19
Collective protection, aluminium safety railings
Barrial® - a extremely versatile railing system
Barrial® - self-supporting
Barrial® - self-supporting rooflight dome railing
Barrial® - self-supporting
Barrial® fixed - on parapet wall
Barrial® fixed - inside of parapet wall Barrial® fixed - Installation at facade
Barrial® fixed - Installation on roof surface Barrial® foldable - on parapet wall
20 www.carlstahl-fallprotection.com
Barrial® self-supporting standard
Counterweights made of 100 % recycelt PVC with 10 years warranty
• CO2-neutral and 100 % recyclable (with guaranteed redemption system)• drillable, screwable, millable and cuttable• UV- and weather resistant • Material compatible to all usual sealing sheets• Grip recesses for a safe transport and high wearing comfort• Space-saving and stackable• Fixing of the weight on the boom rail by an self-drilling screw
Non-penetrative
Without thermal bridge
No sound transmission
No warranty regulation problems
Fast installation due to pre-installed clamp
Functional design
Practically combi-connector
• Connection of post and boom rail by easy plug in• Fixation by integrated clamp with just one screw• Especially space-saving during transport• Non-slip protective cap at the bottom• Height adjustment of railing post up to 30 mm possible• Mounting fixture for an easy installtion of the baseboard by quick connector
Practically clamp mounting
• Fast installation by factory-made by pre-assembled clamp mountings• No scratching of the profiles during installation• Easy adjustment without disassembling• Easy to open and close with just one tool
Practible, elegant and high-class
The load supported railing made from aluminium guarantees safety during all maintenance and care works on privately used flat roofs.
Barrial® self-supporting fulfills optimally all legal regulations for a permanent collective prevention against fall.
The components of the system
Handrail
Kneerail
Combi-Connector
Railing postType: Straight
Baseboard
Clamp
Boom rail
Counter-weight
Flexible posts
stra
ight
incl
ined
15°
incl
ined
30°
incl
ined
45°
roun
ded
The inclination to the inside causes an additional safety distance to the roof edge
The heights of the postsare individually adjusted
DEKRA EXAM GmbH
Tested and certifiedDIN EN ISO 14122-3DIN EN 13374 Class A
www.carlstahl-fallprotection.com 21
Barrial® Corridor escape-, rescue and maintenance routes
Height adjustment up to 300 mm
Supported by load, without penetration of the sealing
Modular system for variable route widths
Patented rail claw, no pre-drilling
Installation by minimal amount of tools
Fast connection of the parts
Regulation compliant, tested and certified
Design in Alu natural or painted in RAL
Special designs for schools and play schools
Innovative rail-claw
• solid aluminium die-cast part• Easy adjustment on the boom rail• Connecting part between
boom rail and L-/T-Profiles• Extra-wide for practicable design of
profile-joints• No pre-drilling necessary• Fixation with an self-drilling screw
L- and T-Profiles for mounting of floor covering
• Specially manufactured profiles with a high stability
• Profiles were clamped not screwed• Very fast installation time, completely
without drilling
Counterweights made of 100% recycelt PVC
• Counterweights made of 100% recyceltPVC with 10 years warranty
• CO2-neutral and 100 % recyclable (with guaranteed redemption system)
• drillable, screwable, millable and cuttable• UV- and weather resistant • Material compatible to all usual sealing
sheets• Grip recesses for a safe transport and
high wearing comfort• Space-saving and stackable• Flexible installation and load distribution
by steps of 12,5 kg• Fixing of the weight on the boom rail by
an self-drilling screw
The components of the system
Rail-claw
Multi-connector
Escape-, rescue- and maintenance routes with system
Boom rail
T-Profile
L-Profile
Baseboard
Kneerail
Railing post
Handrail
Multi-connector with level compensation function
• Compensation of level differences between 0 up to 300 mm possible (bigger sleeve heights on request)
• Mounting fixture for an easy installtion of the baseboard by quick connector
0-300 mmLevelcompen-sation
25 12,512,5
Aluminium boom rail
• Solid extrusion moulding profile with mounting groove Strangpressprofil
• Continuous height adjustable• Easy installation at the post sleeve by
fast-connector
Practically clamp mounting
• Fast installation by factory-made by pre-assembled clamp mountings
• No scratching of the profiles during installation
• Easy adjustment without disassembling• Easy to open and close with just one tool
Door element
• Precast standard elements• Automatic closing mechanism• Direction of doorway to the inside • Easy assimilation by clamp butt connector
DEKRA EXAM GmbH
Tested and certifiedDIN 14094-2
22 www.carlstahl-fallprotection.com
Horizontal cable mesh X-TEND
X-TEND steel cable mesh is made from stainless steel cables with
force-pressed ferrules made from tin-plated copper.
• Cable diameter: 3 mm
• Mesh width 100 mm
Horizontal cable mesh with demonstratedprotection against falls in accordance withgeneral building authority approval Z-14.7-506
• Planning
• Structural analysis
• Delivery
• Installation
Our services
Contact:
Carl Stahl GmbHHelmut SchaeferTobelstr. 273079 Suessen (Germany)Tel. +49 (0)7162 4007-3055Fax +49 (0)7162 4007-8842E-Mail: [email protected]
www.carlstahl-fallprotection.com 23
Horizontal cable mesh X-TEND
24 www.carlstahl-fallprotection.com
Safety nets
Safety nets
Safety nets can prevent people from falling and incurring serious or even fatal injuries. They can also prevent objects from falling onto the lower areas of
construction sites, e.g. when installing overhead lines, constructing houses etc. Attached horizontally, they provide effect accident prevention in line with
the provisions of the German employers’ insurance associations for the construction sector. All the nets are produced in compliance with European Stan-
dard EN 1263-1, as is evidenced by GS marks.
Caution: remember that safety nets must be inspected annually!
Safety nets edged with rope
Knotless safety net conforming to EN 1263-1, system S, square mesh, fully edged with 30 kN
rope, approx. 12 mm in diameter.
Material: high tenacity polypropylene, mesh size: approx. 100 mm
Material thickness: approx. 4.75 mm
Net class A2, GS test certificate 7100004
Suspension rope according to EN 1263-1, type L
For single-rope suspension, one end with spliced loop, the other end firmly sealed off, mini-
mum rope breaking strength of 30 kN.
According to BGR 179, safety nets must be fastened to stable suspension points at a maxi-
mum distance of 2.50 m. When using single-rope suspension, the rope must have a minimum
breaking strength of 30 kN.
Safety nets with rope edge and clips
Knotless safety net conforming to EN 1263-1, system S, square mesh, fully edged with 30 kN
rope, approx. 12 mm in diameter
Clips at 2.50 m intervals
Material: high tenacity polypropylene, mesh size: approx. 100 mm
Material thickness: approx. 4.75 mm
Type
19040-100-01
Size in m
5 x 10
Colour
green
Weight
in kg
13.7
Item no.
49AN510G
19040-100-04 5 x 10 blue 13.7 49AN510B
19041-100-01 6 x 10 green 16.5 49AN610G
19041-100-04 6 x 10 blue 16.5 49AN610B
19042-100-01 10 x 10 green 27.5 49AN1010G
19042-100-04 10 x 10 blue 27.5 49AN1010B
Type
2011
Length in m
2.50
Colour
white
Weight
in kg
0.200
Item no.
49ANZBAS
Type
20030-100-01
Size in m
5 x 10
Colour
green
Weight
in kg
15.00
Item no.
49AN510KBG
20030-100-06 5 x 10 black 15.00 49AN510KBS
20031-100-01 6 x 10 green 18.00 49AN610KBG
20031-100-06 6 x 10 black 18.00 49AN610KBS
www.carlstahl-fallprotection.com 25
Side protection nets
Side protection nets
Safety nets offer clear benefits as side protection on scaffolds or side fall protection when working on flat roofs, bridges and the like: low weight, quick to
attach/detach and minimal space requirement during storage. They not only provide fall protection for people but also offer protection against falling ob-
jects. Whether standard or customised versions, all of our nets are produced in line with the requirements of the employers’ insurance associations and
European Standard EN 1263-1. They are fully edged with an integral surround rope. Alternatively, they can also come with sewn-on quick-connect buck-
les. Our practical Isilink clips or clamp-lock belt-snap buckles enable the nets to be attached in seconds, even when wearing protective gloves.
Side protection nets with sewn-on belt snap buckles
Knotless side protection nets conforming to EN 1263-1, safety net system U.
Made from high tenacity polypropylene, approx. 5 mm in diameter, with integral surround rope
and sown-on belt snap buckles at approx. 75 cm intervals
With GS test certificate 03006
Type
3006-100GSV-01
Size in m
2 x 5
Colour
green
Weight
in kg
4.1
Item no.
49SN25100G
Mesh size
in mm
100
3006-100GSV-04 2 x 5 blue 4.1 49SN25100B100
3006-100GSV-07 2 x 5 red 4.1 49SN25100R100
3006-045GSV-01 2 x 5 green 6.1 49SN2545G45
3006-045GSV-04 2 x 5 blue 6.1 49SN2545B45
3006-045GSV-07 2 x 5 red 6.1 49SN2545R45
3008-100GSV-01 2 x 10 green 7.7 49SN210100G100
3008-100GSV-04 2 x 10 blue 7.7 49SN210100B100
3008-100GSV-07 2 x 10 red 7.7 49SN210100R100
3008-045GSV-01 2 x 10 green 11.7 49SN21045G45
3008-045GSV-04 2 x 10 blue 11.7 49SN21045B45
3008-045GSV-07 2 x 10 red 11.7 49SN21045R45
26 www.carlstahl-fallprotection.com
Fall arrest and work positioning harnesses
www.carlstahl-fallprotection.com 27
Fall arrest and work positioning harnesses
Safe, practical, user-friendly equipment at low prices.
For over 50 years, the brand PROTECTA has represented superior-quality fall protection safety equipment around the world.
The new PRO™ Series of fall arrest and work positioning harnesses
PROTECTA
The new enhanced PROTECTA® PRO™ fall arrest harness design fulfills thesame safety regulations, but offers more comfort equally, better adjustmentoptions, better fixation of the webbing belt and a better functionality. Thecomprehensive product series stays the same one of the biggest in thisbranch. Equally to your requirements in use, a suitable PROTECTA® PRO™
fall arrest harness is available.
PRO™ harness sizing chart
Body weight in kg
Bo
dy
heig
ht in
m
Options for bucklesStandard bucklesAutomatic buckles for morecomfort
Chest strapIdeal position for attachment of lanyards and climbing protectionrunner.Lower injury risk in the facial areadue to its lower position
Easy web adjustmentSprung brackets prevent a slippingof the web.Easy adjustment by pulling down.
Strap positioningSpecial design in the hip area.All seams have no contact to thebody for a better comfort
Options with removable upholsteryCan be attachted by the user itself at every harness of this series. For details check page 28
Big dorsal attachment ringEasy attachmentSuitable for rescue
Adjustable shoulder straps
WebPolyester, Width 45 mmSeam: high-strength polyester thread
Fall indicatorIn case of a fall the seamtears up
Covered labelsA covering protects the labels
28 www.carlstahl-fallprotection.com
Type and Size
S M/L XL
Area of application
AB10112NG (13NG) (14NG) Universal
D-Rings
Back
Buckle type
Standard
Standard
EN361
AB10212NG (13NG) (14NG) Universal Back, Chest Standard EN361
AB11312NG (13NG) (14NG) Confined spaces Back, Chest Standard EN361
AB116125NG (35NG) (45NG) Climbing protection syst. as above and climbing pr. Standard
Weight
in kg
1.06 (1.11) (1.15)
1.28 (1.30) (1.31)
1.13 (1.17) (1.21)
2.02 (2.06) (2.15) EN361
Item no.
Size S(M/L)(XL)
49AG101NGS (NGM/L) (NGXL)
49AG102NGS (NGM/L) (NGXL)
49AG113NGS (NGM/L) (NGXL)
49AG1161NGS (NGM/L) (NGXL)
PRO® 1-point fall arrest harness
Back D-ring, standard locks, better adjustment possibilities, fall indicator
AB10112NG
Type Weight in kg
PVC-Carrying bag, black 0,60
Size (h x Ø)
in cm
60 x 30
Capacity in litres
45
Item no.
49ZBPS01
Carrying bag AK043 0,4050 x 30 35 49ZBAK43
Transportation bag 0,96WxLxH (30x45x35) 45 450T0000
AK096NG Shoulder pad 0,17Unisize - 49AGZB096NG
9502120NG Leg pad 0,12Unisize - 49AGZB120NG
PVC Carryingbag
Fall arrest and work positioning harnesses
PRO® 2-point fall arrest harness
Back and front D-ring, standard locks, better adjustment possibilities, fall indicator
AB11312NG
PRO® 3-point fall arrest harness
Back D-ring, shoulder rings for entry and rescue from confined spaces, fall indicator
AB10212NG
PRO® 5-point fall arrest and work positioning harness
Back and front D-ring, fixation rings and climbing protection ring, fall indicator
AB116125NG
Shoulder padAK096NG
Leg pad9502120NG
Permissible total weight including equipment = 140 kg
Optional for all PRO® -harnesses
Transportationbag
AK043from Nylon
www.carlstahl-fallprotection.com 29
Type and Size
S M/L XL
Area of
application
D-Rings Buckle type StandardWeight
in kg
Item no.
Size S (M/L) (XL)
AB105125NG (35NG) (45NG) Confined spaces Back, Side, Chest Standard 2.07 (2.14) (2.21) EN361-358 49AG1051NGS / NGM/L / NGXL
AB10112HVNG (13HVNG) (14HVNG) Universal Back Standard 1.5 (1.56) (1.6) EN361/EN471 49AG101HVNGS / HVNGM/L / HVNGXL
AB11312K (13K) (14K) Steelwork, Constr. Back, Chest pass-thru buckle 1.25 (1.30) (1.40) EN361 49AG11312K / 13K / 14K
AB113EA (ELA) Universal Back, Chest Automatic 1.395 EN361 49AGF0EA* (49AGFELA)**
AB12432 (33) (34) Universal Back, Chest thorn buckle 1.44 (1.48) (1.92) EN361 49AG124S (M) (L)
Fall arrest and work positioning harnesses
FLEXA harnessProduct line with elastic web and automatic fast-lock. Equipped with D-ring at the back andfront.
AB113EA
All FLEXA harnesses- comfort-elastic web in
the shoulder area- match to the user- for a fatigue-free work
FLEXA harnesswith thorn lock in the leg area
AB12433
PRO® 5-point fall arrest and work positioning harness
Back D-ring, shoulder rings for enty and rescue from confined spaces, fixation rings
AB105125NG
PRO® 2-point welder fall arrest harness
Extremely robust and heat resistant (370° C)Especially resistant against possible thermal damages, which can be occur during welding.
AB11313K
PRO® Hi-Vis vest fall arrest harness
Inclusion of the PRO-fall arrest harness with a safety vest for a quick and easy dressing.
- integrated pockets- leight-weight, breathable textile- inside mesh-lining and fixations keep the shape of the vest- dressing like a coat- Reflecting warning stripes according to EN471 Kl. B
AB10112HVNG
*Size M/L **Size XLPermissible total weight including equipment = 140 kg
30 www.carlstahl-fallprotection.com
Free fallheight
Arrestheight
HeightofffallFPS
Availableheightof fall
Dece-lerationheight
Safety margin
Lanyards - selection guide
Product
PRO™
Material
25 mm polyester webbing
10.5 mm rope
Connector
Self-locking
karabiner
Fall indicator
Transparent plastic cover
over energy absorber
Area of application
• Construction industry
• Utilities industry and maintenance
• Installation and service
• High-bay warehouses
Energy absorbing lanyards
The PROTECTA energy absorbing lanyards provide highquality at a low price. They have a transparent cover overthe energy absorber to make it easy to inspect the stitching. Available with several different karabiner optionsand configurations depending on the requirements of yourwork site.
Energy absorbing lanyardAE522/3
Y-Energy absorbing lanyardAE532/3
Energy absorbing lanyards - rope basis
Energy absorbinglanyardAE5220WAE
PRO™ Stretch energyabsorbing lanyardwith impact indicatorAE5220SAK
Height of fallcalculation
PROTECTA offers the broadest range of fall arrest devices in the industrial worldwide
Simple use and lightweight materials are combined to comply with and exceed the requirements of European standards.
Lanyards
Energy absorbing lanyard - webbing
Type Material
AE522/3 10.5 mm kernmantle rope
1-
leg
4
2-
leg
Length
in m
2.0
Connector
2 karabiners - 18 mm opening width
AE532/3 10.5 mm kernmantle rope 4 1.8 1 karabiner - 18 mm, 2 scaffold hooks - 60 mm opening width
Weight
in kg
0.88
1.73
Item no.
49VMKS01
49VMY001
Type Material
AE5220WAE 25 mm polyester webbing
1-
leg
4
2-
leg
Length
in m
2.0
Connector
1 karabiner - 17 mm, 1 carabiner - 18 mm opening width
AE5320WAF 25 mm polyester webbing 4 2.0
Weight
in kg
0.81
1.80 1 karabiner - 17 mm, 2 scaffold hooks - 60 mm opening width
Item no.
49VMGB01
49VMY002
AE5220SAK 50 mm stretch material 4 2.0 1.03 Screw karabiner 17 mm, scaffold hook - 60 mm opening width 49VMST0SAK
Y-Energy absorbinglanyardAE5320WAF
www.carlstahl-fallprotection.com 31
Lanyards
Pro™ Stretch Lanyards
• Tested on an edge with a radius of 0.5 mm
• Enhanced protection for workers subjected to the risks associated with working over edges
• Two layers of tubular webbing create a highly durable product with an outstanding service
life
• Available with a screw or twist lock karabiner
• Differentiated from Pro Stretch standard lanyards by means of the orange labelling on the
packaging and the black stripes on the lanyard
• Depending on the user’s needs, different lanyards are available from standard karabiners
to scaffold hooks with large openings.
EN 355
Type Material
AE5220SBB/SE 50 mm stretch fabric
1-
leg
4
Length
in m
2,0
Karabiner
2 steel karabiners AJ 514 = 18 mm opening width
Weight
in kg
0.79
Item no.
49VMSBB200
AE5220SBK/SE 50 mm stretch fabric 4 2,0 1 x steel karabiner AJ 514 = 18 mm opening width
1 x aluminium karabiner AJ 527 = 60 mm opening width
1.08 49VMSBK200
AE5220SYK/SE 50 mm stretch fabric 4 2,0 1 x aluminium karabiner AJ 512 = 22 mm opening width
1 x aluminium karabiner AJ 527 = 60 mm opening width
1.08 49VMSYK200
Sanchoc™ kernmantle rope lanyard
• Tested on an edge with a radius of 0.5 mm
• Enhanced protection for workers subjected to the risks associated with working over
edges
• 12.5 mm kernmantle rope makes for an extraordinarily reliable product with an out-
standing service life
• Available with a screw or twist lock karabiner
• Differentiated from the Sanchoc standard kernmantle rope lanyard by means of the
orange pattern
EN 355
Type Material
AE5220REK/SE 12,5 mm kernmantle rope
1-
leg
4
2-
leg
Length
in m
2,0
Karabiner
1 x steel karabiner AJ 565 = 17 mm opening width
1 x aluminium karabiner AJ 527 = 60 mm opening width
Gewicht
in kg
1.20
Item no.
49VMREK200
AE5315REK/SE 12,5 mm kernmantle rope 4 1,5 1 x steel karabiner AJ 565 = 17 mm opening width
2 x aluminium karabiners AJ 527 = 60 mm opening width
1.70 49VMREK150
AE5220RBB/SE 12,5 mm kernmantle rope 4 2,0 2 x steel karabiners AJ 565 = 17 mm opening width 0.90 49VMRBB200
AE5220RBK/SE 12,5 mm kernmantle rope 4 2,0 1 x steel karabiner AJ 514 = 18 mm opening width
1 x aluminium karabiner AJ 527 = 60 mm opening width
1.40 49VMRBK200
AE5220SBK/SE
AE5220REK/SE
AE5220SBB/SE AE5220SYK/SE
AE5315REK/SE AE5220RBB/SE AE5220RBK/SE
32 www.carlstahl-fallprotection.com
Lanyards, connectors and karabiners
AM450/80
AJ301
Lanyard - restraint system
Lanyards without an energy absorber must only used for restraint purposes. In no event should their users be able to enter an area in
which there is a risk of falling. The restraint system is precisely defined for each place where it will be used. To guarantee users’ safety,
they should be given precise information about the PPE and the anchorage point to be used.
Rope lanyard AL420C
„Trigger“positioning lanyardAF777
Webbing lanyard AL422OWAE
Lanyards for positioning
For information on lengths and connectors not listed, please contact Carl Stahl.
Karabiner
Connectors for anchorage devices
Type Description
AL420C Kernmantle rope
10.5 mm
1-
leg
4
Length
in m
2.0
Connector
2 Seilkauschen
AL4220WAE 25 mm
nylon webbing
4 2.0 1 Karabiner - 18 mm,
1 Karabiner -
17 mm Öffnungsweite
Item no.
49HMS200
49HMG200
Item no.
49HMAF01
Type Description
AF777 Kernmantle rope
10.5 mm
1-
leg
4
Length
in m
0.4 - 2.0
Weight
in kg
0.22
0.53
Weight
in kg
0.75
Connector
1 karabiner - 18 mm,
1 karabiner -
17 mm opening width
Positioning
Type Karabiner type
AJ501 Screw gate
Breaking load/standard
25 kN, EN 362
Description
17 mm opening width,
galvanized steel
AJ514 Twistlock 25 kN, EN 362 18 mm opening width, steel,
galvanized finish
AJ521 Twistlock
Weight in kg
0.17
0.18
0.1023 kN, EN 362 18 mm opening width,
aluminium alloy
Type Product
AM450/80
AM450/150
Web sling acc. to
EN795
Description
25 mm wide nylon web sling
Length in m
0.8
1.5
AM401G
AM402G
Cable sling acc. to
EN795
Coated wire rope, 6 mm diameter, galva-
nized finish, thimbled ends
1.0
2.0
AJ301
AJ302
AJ303
Manucroche acc. to
EN362
Attached arround piping up to 140 mm in
diameter (AJ303), stainless steel design
0.075
0.110
0.140
Weight in kg
0.08
0.15
0.30
0.46
0.30
0.35
0.40
Item no.
49KH0004
Item no.
49APS080
49APS150
49APS100
49APS200
49KH0001
49KH0002
49KH0003
49KH0005
49KH0006
AJ514AJ501 AJ521
AM401G
2 thimbles
1 karabiner - 18 mm,
1 karabiner -
17 mm opening width
www.carlstahl-fallprotection.com 33
Mobile fall arrest devices
Mobile fall arrest devices VIPER™ LT, edge tested
Standard: EN 353-2, EN 358AC4002AC4015
Type Product
AC4002 VIPER™ LT
Description Weight
in kg
0.35
Item no.
49MAAC4002
AC4005 Lifeline 1.00 49SEAC4005
AC4010 Lifeline 1.5 49SEAC4010
AC4015 Lifeline Kernmantle rope, Length 15 m, Ø 12,5 mm
Kernmantle rope, Length 10 m, Ø 12,5 mm
Kernmantle rope, Length 5 m, Ø 12,5 mm
2.0 49SEAC4015
AC4020 Lifeline Kernmantle rope, Length 20 m, Ø 12,5 mm 2.5 49SEAC4020
Mobile fall arrest devices COBRA™
AC202/01
Type Product
AC202/01
*other lengths available on request
Standard: EN 353-2
COBRA™
Static/
mobile rope
grab
Description
Can be attached or detached anywhere along the lifeline for vertical
handsfree operation. Suitable for ropes with 14 mm diameter. Delivery with
a srew gate karabiner - 17 mm opening width
AC205 Lifeline 14 mm geflochtenes Seil mit 3 Litzen für Cobra - Länge 5 m*
Lieferung mit Schraubverschlusskarabiner - 17 mm Öffnungsweite
Gewicht
in kg
0,98
0,92
Item no.
49MA1001
49SEAC05
AC202/03 COBRA™
Rope grab
siehe AC202/1
zusätzlich mit Verlängerungsgurtband L = 28 cm einschließlich
Automatikkarabiner AJ565
1,05 49MA1002
AC210 Lifeline 1,5314 mm geflochtenes Seil mit 3 Litzen für Cobra - Länge 10 m*
Lieferung mit Schraubverschlusskarabiner - 17 mm Öffnungsweite
49SEAC10
AC202/03
14 mm braided rope with 3 strands for Cobra - length 5 m*
Delivery with screw gate karabiner - 17 mm opening width
Weight
in kg
0.98
0.92
see AC202/01
additionally with extension webbing L = 28 cm including automatic
karabiner AJ565
1.05
1.5314 mm braided rope with 3 strands for Cobra - length 10 m*
Delivery with screw gate karabiner - 17 mm opening width
Absorbing fall arrest device,
• vertical use with 140 kg tested
• horizontal use as restraining system with 100 kg tested
Type Weight in kg
PVC-Carrying bag, black 0.60
Size (h x Ø)
in cm
60 x 30
Capacity in litres
45
Item no.
49ZBPS01
Carrying bag AK043 0.4050 x 30 35 49ZBAK43
Transportation bag 0.96WxLxH (30x45x35) 45 450T0000
PVC Carrying bag
AK043from Nylon
Transportationbag
34 www.carlstahl-fallprotection.com
>40°
Collisionrisk
by swinging
Produkt Beschreibung
Rebel™ Vorschriftsgemäße und zuver-
lässige, und doch wirtschaft-
liche Qualität
Gehäuse
Extrudiertes Alumi-
nium oder thermoplas-
tischer Kunststoff
Verbindungs-
element
Selbstverriegelnder
Karabiner
Schwenk-
Karabiner
4
Gehäuse
Karabiner
4
Sturz-
indikator
4
Einsatzbereich
• Bauindustrie
• Offshore, Raffinerien
• Stahlindustrie
Bestseller mit leichten, auch
kürzeren HSGs – passt in das
engste Projektbudget!
Verfügbar mit Karabiner,
Wirbelkarabiner oder Be-
wehrungsstahl-Haken
Optional 44• Lagerhäuser
• Kommissionierung
• Leichte Wartungsaufgaben
• Bauindustri
Die Rebel™, rope basisfall arrestersBecause of the integrated structure and the fall
indicator, specialists can conduct the annual
inspection as a visual inspection. It is therefore
not necessary to send the retractable type fall
arrester to a service centre for the annual
inspection. User weight 140 kg
Rebel™ with fall indicatore.g. 10 m rope
Type 3590521
Type Length
3590521 10 m
Rope type
5 mm galv. rope
Housing
Plastic
3590570 15 m 5 mm galv. rope Plastic
3590610 20 m 5 mm galv. rope Plastic
3590690 30 m 5 mm galv. rope Plastic
Rebel™ fall arrestersThe Rebel retractable type fall arrester is
lightweight yet robust enough to with-
stand complex uses. The unique webbing
enables flexible usage.
• High quality with outstanding features
• Compact and lightweight – at under
1.4 kg, the best length to weight ratio
for industrial use
• Durable aluminium housing
• User weight 140 kg
• The web model weighs only 1.3 kg!
Rebel™
fall arresters3 m webbing
Type Length
AD111 3 m
Rope type
25 mm polyester webbing
Connector
Karabiner hook AJ501*
Housing
Aluminium
AD120 6 m 25 mm polyester webbing Karabiner hook AJ501* Aluminium
Weight
in kg
1.3
2.45
Item no.
49HSG003
49HSG006
Item no.
49HSGR10
49HSGR15
49HSGR20
49HSGR30
*not included
Weight
in kg
5.6
7.5
10
13.4
The pendulum effect risk
To limit the risk of accidents caused by the
pendulum effect (or sideways swinging),
the retractable type fall arrester must be
vertically installed over the work zone. It is
important to work in the 40° conical safety
area beneath the anchorage point. If the
work zone is outside this conical safety
area, a second retractable type fall ar-
rester is used, whereby the two retractable
type fall arresters are attached to the two
ends of the work zone.
PROTECTA fall arresters - smooth, safe operation and built to last! - selection guide
Fall arresters
Product Description
Rebel™
webbing
Small, light and compact
Housing
Extruded aluminium or
thermoplastic
Connector
Automatic karabiner
Swivel
suspension
4
Housing
Karabiner
4
Fall
indicator
4
Area of application
• Construction industry
• Assembly / Maintenance
• General industry
Rebel™
Rope
Robust and with handle for
transportation
Automatic karabiner with
swivel suspension
4 44• Construction industry
• Assembly / Maintenance
• Energy suppliers
• Telecommunications
3590542 6 m 5.5 mm galv. rope Plastic 49HSGRK065.9
Rebel™ with fall indicatore.g. 10 m rope
Type 3590542, edge tested
www.carlstahl-fallprotection.com 35
Fall arrest kits
KIT 2 for vertical standard work within industry and construction
Kit contents:
1 x fall arrest harness AB11313NG*1 x fall arrester
Type Rebel 3590521, L = 10 mincluding karabiner
1 x webbing loop AM450/80 (L = 80 cm)1 x carrying bag 49ZBPS01
Weight: 7.55 kg*Standard size M/L
Item no. 49SETPR2
KIT 3 for vertical work and restraint systems
Kit contents:
1 x fall arrest harness AB105135NG*1 x guided fall arrester AC202/01
„Cobra“1 x stranded rope AC210, Länge 10 m,
ø 14 mm1 x carrying bag 49ZBPS01
Weight: 5.35 kg*Standard size M/L
Item no. 49SETPR3
KIT 4 Universal kit
Kit contents:
1 x fall arrest harness AB10113NG*1 x positioning sling AE5220WAE1 x webbing loop AM450/80 (L = 80 cm)1 x carrying bag 49ZBPS01
Weight: 2.70 kg*Standard size M/L
Item no. 49SETPR4
KIT 1 for vertical standard work within industry and construction
Kit contents:
1 x fall arrest harness AB11313NG*1 x fall arrester „Rebel“
AD120, L = 6 m1 x karabiner AJ5011 x webbing loop AM450/80 (L = 80 cm)1 x carrying bag 49ZBPS01
Weight: 4.57 kg*Standard size M/L
Item no. 49SETPR1
36 www.carlstahl-fallprotection.com
max.
15 m
ARIANA wall installa-
tion principle
Installation in the corner area
ARIANA post installa-
tion principle
Installation on a post
Ceiling/overhead installation
1832a
4
2a
2a
9
10
1
6
5 7 6 2 3 11 5
Horizontal lifeline system ARIANA
The lifeline system provides several installation options: on the wall, on the
ceiling, on a post, on the roof ridge, on the terrace, on a framework etc.
Several different interim elements and end plates are available depending
on the installation type (metal or concrete structure).
The responsible planner must determine the suitable mounting method for
the end pieces and the intermediate anchorages. All technical details and
blueprints are required for project planning.
A conformity certificate no. 9765559 has been issued by the French testing
institute APAVE.
QUALITY
Breakage tests and inspections are conducted on each partial batch with-
in the scope of the ISO 9001 certification of validated quality procedures.
CHARACTERISTICS
Use on horizontal, rectilinear and/or curved areas, slope of up to 15°, un-
limited installation configurations on all load-bearing structures, traversable
intermediate recovery part.
- Users: max. 5 people.
- Intermediate recovery: max. gap of 15 m.
- Pretensioning force: 80 daN.
CAUTION:
In accordance with the standard, the rope slope is of no morethan 15° from the horizontal. To limit the risk of an accident dueto the pendulum effect, the shuttle must be positioned verticallyto the work area.
The use of individual components outside the system is not
permitted and disqualifies any warranty claims.
The installed ARIANA system is subject to an annual safety
inspection by Carl Stahl or another authorised specialist com-
pany. Without this inspection, the warranty becomes void.
The manufacturer’s liability is only guaranteed if the system is
installed by the authorised specialist company.
Horizontal lifeline system
www.carlstahl-fallprotection.com 37
91 m
m
118 mm
71 mmIntermediate recovery
part
- Material: stainless steel 1.4401
- Stainless steel screws V2A
- Attachment to vertical or
horizontal support
- Net weight: 460 g
Item no. IAN705
2a
2b Intermediate recovery
part for overhead
installation
- Material: stainless steel 1.4401
- Stainless steel screws V2A
- Attachment to the ceiling
- Net weight: 460 g
Item no. IAN705/2
R = 260 mm
Shuttle
- Stainless steel Z8CND17 04,
electrolytically polished
- Steel karabiner AJ501
- Use on stainless steel cables
with ø 8 mm
Construction 7 x 19
- Net weight: 390 g
Item no. IAN700
Curve
- Material: stainless steel 1.4401
- Diameter: 13.5 mm
- Use as 90° inner/outer angle
- Net weight: 300 g
Item no. IAN716
Swage pretensioner
- Material: stainless steel 1.4401
- Pretensioning force on use: 80 daN
- Cable diameter: 8 mm
- Net weight: 420 g
- The cable is classed as adjusted
when the display disc starts to rotate and must not be
any further tightened from this time onwards.
Item no. IAN707
Swage end
- Material: stainless steel 1.4401
- Cable diameter: 8 mm
- Weight: 221 g
Item no. IAN709
Energy absorption
element
- Material: stainless steel 1.4301
- Tripping threshold: 2.4 KN
- Use: vertical and horizontal
- Energy absorption element for
one-off use
- Net weight: 1.1 kg
Item no. IAC325
Swageless end clevis
- Material: stainless steel 1.4401
- Net weight: 420 g
Item no. IAN709/1
127 mm
127 mm
General-purpose anchor
plate
- Material: stainless steel 1.4401
electrolytically polished
- Use as an exterior anchor plate,
3 M12 fasteners
- This anchor plate must be used
with a quick link with ø 8 mm
Item no. IAN719
Round strand rope 7 x 19
- Material: stainless steel 1.4401
- Rope diameter: 8 mm.
- Pretensioning force on use: 80 daN
- Construction 7 x 19
- Net weight: 246 g/metre
Item no. IAN708
Swageless pretensioner
- Identical to AN707, equipped with
olive type manual crimping end
- Material: stainless steel 1.4401
Item no. IAN707/1
Anchor plate for post
- Galvanised steel
- Stainless steel link: 8 mm
- Size: 120 x 40 x 10
- Net weight: 438 g
Item no. IAN718
1 6
7
8
9
10
11
3
4
5
Horizontal lifeline system
38 www.carlstahl-fallprotection.com
CABLOC fall arrester
With built-in energy absorber for
installations without a line head energy
absorber
- Material: stainless steel 1.4301
- Easy connection and disconnection
at any point of the line
- Version with rigid guide compliant with
DIN EN 353-1 and version with
mobile guide compliant with DIN EN
353-2
Item no. IAC350/4
Vertical lifeline system CABLOC
The CABLOC system ensures users’ safety when climbing masts, chim-
neys, fixed ladders etc. The CABLOC system runs freely on the perma-
nently attached wire rope and secures users while also providing them with
unrestricted freedom of movement. Standard: EN 353-1, 353-2
Thimble loop on one end,
loop U-clamp terminal on
the other end
- Material: stainless steel 1.4401
- Rope diameter: 8 mm
- Construction: 7 x 19
Item no. IAC308/1
d = 18 mm
d = 18 mm
General-purpose cable
guide
- Material: stainless steel 1.4301 and
rubber
- Suitable for the most common
installation methods; limits
cable floating
- Net weight: 360 g
Item no. IAC320
Clevis and eye cable ten-
sioner installations with
a rigid anchor line
- Material: stainless steel 1.4401
- The built-in tension indicator can be
used to monitor the optimum tension
required for the smooth functioning
of the CABLOC system
- Also available as a clevis/clevis
version Order no. IAC330/1
Item no. IAC330
General-purpose
anchorage beam
- Material: stainless steel 1.4401
- Absorbs all forces generated during
a fall
- Suitable for the most common types
of anchor lines with a diameter of 30 to
90 mm
- Design compliant with EN795, Class A1
- Net weight: 2450 g
Item no. IAC340
Energy absorption element
- Material: stainless steel 1.4301
- Tripping threshold: 2.4 KN
- Use: vertical and horizontal
- Energy absorption element for one-off
use
- Net weight: 1.1 kg
Item no. IAC325
1
2
3
4
5
6
CABLOC Installation principe
1
2
3
5
6
4
Vertical lifeline system
Options withIAC 350
www.carlstahl-fallprotection.com 39
Lifeline systems for self-assembly/anchorage point
AC3000 Cabloc kit for a vertical lifeline system
AC3000/10 (10 m), AC3000/20 (20 m), AC3000/30 (30 m)
The Cabloc kit combines all the components required to install a safety system
that provides access to a work position at a height via a ladder or metal struc-
ture. The user instructions provide users with detailed information on all the sys-
tem installation steps and the necessary precautionary measures. This enables
users to safely access work positions at heights.
- Stainless steel cable with ø 8 mm with factory-manufactured
end connections
- Cabloc fall arrester AC350
- 2 general-purpose anchorage beams (upper and lower)
AC340
- Energy absorber AC325
- Cable tensioner with pretension indicator AC330
- Name plate AN126
- General-purpose cable guide AC320
- System breaking strength > 15 kN EN353-1
Type Length
in m
AC3000/10 10
AC3000/20
AC3000/30
20
30
Weight
in kg
11.3
14.4
17.1
Rope-Ø
in mm
8
8
8
Number of
users
1
1
1
Item no.
49CABL10
49CABL20
49CABL30
Type Description
AM211 Standard individual
anchorage point
Material
Stainless steel
Required
anchoring
in stainless steel
Ø 12 mm
Standard
EN795, test load
10 kN
Weight
in kg
0.110
Item no.
49AP0211
Outer-Ø 56 mm
Ø 13,5 mm
Inner-Ø 38 mm
Individual anchorage point AM211
Individual anchorage point AM211 for the anchorage of a person to common undergrounds like steel, concrete or walls.
Breaking loads: A: = 15 kNB: = 15 kNC: = 15 kNStandard: EN795: 1996, Class A
C
Webbing loop not included.
dia 56 mm
dia 13,5 mm
24,5 mm
dia 38 mm
6 m
m dia 36,5 mm
50 m
m
dia 40 mm
40 www.carlstahl-fallprotection.com
Working in confined spaces, rescue and retrieval
FeetSlip-resistant and slewable.
Adjustable telescopic legsSelf-locking pins 8 adjustable height positionsUsable height 1.35 - 2.35 mBasic diameter 1.50 - 2.56 m.
RebelTM with rescue winchFall arrester with integrated winch 15 m.
PulleyGuides the safety rope centred over the entry.
4 attachment pointsApproved for 2 personsLoad capacity 500 kg.
Tripod self-locking pillarIntegrated in the aluminium head to cause, that the legs keep locked.
1
2
3 + 4
Type
AM100
Description
Aluminium-Tripod acc. to DIN EN 795
Weight in kg
21.75
Item no.
49RTA100
AT052/1 Pulley 0.92 49RTAT052/1
3591002 Fall arrester with winch, rope length 15 m, galvanized 12.0 49RTHSG15
3591003 Fall arrester with winch, rope length 15 m, stainless steel 12.0 49RTHSG15/2
8005050 Adapter for fall arrester and load winch, aluminium 2.0 49RTAD01
AK0100
Image no.
1
2
3
4
AT150/2 Load winch 150 kg, rope length 20 m 10.1 49RTAT150/25
6
8 Carrying bag (PVC) 1.0 49ZBAK0100
3401025 Bracket for fall arrester 0.7 49RTAD027
Fall arrester RebelTM
with rescue winch• Mechanism for attachment of bracket• 2 Swivel and fall indicator• Twistlock-karabiner at housing
Technical details:Length: 15 mCapacity: 140 kgStandard: CE EN 360:2002 and EN 1496:2006 Class BHousing material: AluminiumMeasurements: D14 x W28 x H61 cmTransmission of winch: 7,4 : 1
Load winch AT150/2• Capacity 150 kg• Rope length 20 m• Incl. bracket, but without adapter
3 + 4
6 + 7
8
5
Type 3591002 und -003
www.carlstahl-fallprotection.com 41
rollgliss® R350 rescue system
PLEASE NOTE: The rope is sold in increments of 10 m and other accessories are also available, including pulleys for
reduction ratios of 2:1 and 5:1, winch handles etc.
Other rope lengths are available on request.
AG6350ST21 R350 rescue system, ratio 2:1 10 - 100
Type Description Length in m
2.54
Weight in kg
9 mm rope
AG6350ST31 R350 rescue system, ratio 3:1 10 - 100 2.729 mm rope
AG6350ST51 R350 rescue system, ratio 5:1 10 - 100 2.97
49RTRG21
Item no.
49RTRG31
49RTRG519 mm rope
for rope-Ø
AG6720060 60 9.0
Type Length in m Rope-Ø in mm
5.4
Weight in kg
Kernmantle rope
AG6720080 80 9.0 7.0Kernmantle rope
49RTRG60
Item no.
49RTRG80
Description
rollgliss™ R550 Rescue and descent device rollgliss™ R550 Accessories
3329010 R550 rescue device with 10 m rope
Type Description
3.5
Weight in kg
9.5 mm 49RTR5510
3329020 R550 rescue device with 20 m rope 4.09.5 mm 49RTR5520
3329030 R550 rescue device with 30 m rope 4.69.5 mm 49RTR5530
3329040 R550 rescue device with 40 m rope 5.29.5 mm 49RTR5540
Item no.Kernmantle rope-Ø
282
141
141
75
Max. user weight in kg
175
500
500
500
Max. height in m
2
number users
1
1
1
• Self- and victim rescue• Compact and lightweight design• Fully automatic controlled descent• Two autonomic brakes for a double
safety• Bidirectional design enables multiple
rescues• 2 redirection points• Mutual running• i-Safe™ (for recording and storing
information on inspections)• Operating temperature -40° to +60°• Prominent spindle for a controlled
up- and abseiling with a cordlessscrewdriver
• Max. rope length 300 m• 9.5 mm Kernmantle rope• Capacity: 2 users /
59 kg to 282 kg• Rate of descent:
0.6m to 0.9m/sec. – 1 user0.6m to 1.2m/sec. – 2 users
• Certified acc. to EN 341:1992 1A andEN 1496:2006 Class B
Rescue and retrieval
9506162 Rope bag (A)
Type Description
0,93
Weight
in kg
1 49RTZBR550/1
3320003 Edge protector (B) 0,51 49SS330003
AG570 Pulley (C) 0,261 49SRAG570
AC202 Guided fall arrester (D) 0,871 49MA1003
2000112 Karabiner (E) 0,234 49KH0008
AM450/120 1.20 m webbing loop (F) 0,162 49APS120
AM450/80 0.80 m webbing loop (G) 0,081 49APS080
9508289 Sealed Box* (H) 7,51 49ZBSEAL115
Item no.Recommen-
ded numbers
* Sealed Box (63 x 50 x 35 cm, 7 kg) for max.150 m rope length
A
B CD
E
F
G
H
The rollgliss® system includes the patented one-way top shive (only rotates when raising) providing efficient hauling, but more
importantly highly controlled lowering (a finger and thumb are all that is required to hold a load). This system also allows you to
change the reduction ratios on the fly with a quick-release double-locking button on the top and auto-locking karabiners on the
bottom.
This allows the system to be rigged for rooftop rescue, tower rescue or two person rescue. Standard: in accordance with EN
341, Class A (descender) and EN 1496 Class B (rescue lifting device).
Max. descent distance: 340 m
42 www.carlstahl-fallprotection.com
Fall arrest and work positioning harnesses
The new Delta™ fall arrest harnesses:
Innovative fullbody assistance since more than two decades.Robust, practicable and comfortable.
Repel™ webWater-resistant, anti-bacterialand stain resistant, high resistancy against abrasion
Material loopLanyard keepers forparking of not used lanyards
Revolver™Equipment for vertical webbingadjustment. Easy and fast adju-ster without loose ends, whichprevent slipping by latching.
Delta™ Comfort paddingImproved ergonomic fit, soft,breathable, comfortable filling
Tech-Lite™ Automatic locksCompact Aluminium-lightweightconstruction for a fast and easy use.
Stand-up back D-ringStand-up, sprung construction
No-Tangle™ DesignFrame with triangular Design.For an easy and fast dressing.
Integrated Impact indicatorRip-Stich-Indicators as a noteabout damaging impact loads.
Protected label pocketVelcro® coverage protects the integrated i-safe™ transponderand makes the testing easier.
SureFit Elastic with limitedelasticitySurefit ensures a tight and correct fitting.
Permissible user weight including equipment = 140 kg
Delta™ harness size chart
Body weight in kg
Bo
dy
heig
ht in
m
www.carlstahl-fallprotection.com 43
Fall arrest and work positioning harnesses
1112918
1112909 1112912
Type and Size
Unisize
Weight
in kg
D-Rings Buckle type Positioning
harness
Item no.
Size Unisize
1112918 1.65 Back Automatic lock 49AGDT918
1112912 1.75 Back and Chest Automatic lock 49AGDT912
1112909 2.60 Back and Chest, positioning harness Automatic lock 4 49AGDT909
DELTA™ Fall arrest and work positioning harnessFront and back D-ringSide D-ringsStandard: EN 361, EN 358
DELTA™ Fall arrest harnessBack D-ring, pass through bucklesStandard: EN 361
DELTA™ Fall arrest harnessFront and back D-ring, positioning harness, automatic locksStandard: EN 361
PVC Carrying bag Transportation bag
Type Weight in kg
PVC-Carrying bag, black 0.60
Size (h x Ø)
in cm
60 x 30
Capacity in litres
45
Item no.
49ZBPS01
Transportation bag 0.96WxLxH (30x45x35) 45 450T0000
Permissible user weight including equipment = 140 kg
44 www.carlstahl-fallprotection.com
ExoFitTM XP fall arrest harness
Developed for quality
This standard gives you peace of mind when selecting a fall arrest har-
ness. A quality fall arrest harness means maximum comfort, freedom of
movement and ease of use.
Industry innovations such as the spring-loaded stand-up back D-ring and
the no-tangle Delta™ pad are signs of an innovative development.
A fall arrest harness is designed with straps to fasten around the user in
order to distribute fall arrest forces over at least the thighs, pelvis, chest
and shoulders. This moves the impact of a fall from the internal organs
to the major bone and muscle groups around the pelvis. The fall arrest
harness includes the means to be attached to the other components of
a fall protection system. All fall arrest harnesses meet strict OSHA,
ANSI, and CSA standards.
No-tangle design
Donning a harness incorrectly can mean the equipment may not work
properly. The patented Delta™ pad and the Exofit™ exclusive wrap-
around X-design make these harnesses easy to don and comfortable to
wear with a wide spread over the shoulders to prevent irritating abra-
sion.
Colour-coded sizing
Colour-coded sizing allows workers to quickly and easily choose the
harness that will work best for their size.
Arc Flash
Arc Flash harnesses are made from a material such as 31 kN nylon to
meet the requirements of uses in the utility industry where protection
against static build-up is required. Options include non-conductive, non-
sparking PVC-coated metal parts and a back PVC-coated D-ring.
Leather insulators beneath the metal parts reduce static energy trans-
fer.
Features of the ExoFit™ XP fall arrest harness
Quick-connectbuckles
Stand-up back D-ring
Removable shoulder,back and leg padding
Built-in impactindicator
Lanyard holder
Padding
Cushioned shoulder, leg and hip pads keep the pressure off to provide
extra worker comfort for long hours of wear. In a fall, they absorb the im-
pact and help distribute your weight. They can be built-in to avoid slip-
ping or loss, or washable and removable to improve the product’s dura-
bility.
Lining
The ExoFit™ and ExoFit™ XP fall arrest harnesses feature breathable
lining that wicks moisture away from your body, keeping you dry and
comfortable in hot or cold conditions. Initially designed for sport, recre-
ation and work shoes, the breathable 3-D mesh lining is robust and re-
sistant to odour and mildew.
Fall indicator
The fall arrest harnesses have impact indicators to give immediate notice
that the harness has been in a fall. This promotes safety and proper in-
spection.
Stand-up back D-ring
The unique, patented DBI-SALA spring-loaded D-ring makes connection
easy for increased worker comfort and productivity.
Integrated lanyard holder
A lanyard holder provides a place to hook the end of the lanyard when it
is not in use. This prevents tripping and entanglement for enhanced safe-
ty and productivity.
i-Safe™
All DBI-SALA harnesses now come with i-Safe, the integrated RFID
system.
Fall arrest and work positioning harnesses
Type and Size
S M L
Weight
in kg
KB11109745 (46) (47) 2.0 (2.1) (2.2)
D-Rings
Back, front
Buckle type
Automatic lock
Positioning
harness
KB11100585 (86) (87) 3.2 (3.4) (3.6) Back, front, side Automatic lock 4
Item no.
Size S(M)(L)
49AGXP2S(M)(L)
49AGXP4S(M)(L)
ExoFit™XP fall arrest harness
• The industry’s first truly washable harness with removable padding
• Breathable 3D mesh lining with soft edging for enhanced comfort
• Unique spring-loaded stand-up back D-ring with impact indicator
• Integrated lanyard holder to eliminate the risk of tripping
Standard: EN 361, EN 358
Permissible user weight including equipment = 140 kg
www.carlstahl-fallprotection.com 45
Fall arrest and work positioning harnesses
ExoFit™Nex basic information
• Two loops for hanging lanyards while not in use. The loop opens when pulled to prevent any risk of tripping.A sleeve protects the labelling and contains a transponder for electronically managing inspections (i-Safe™).
• Duo-Lok™ quick connect buckles. One-handed operation and high-grip mechanism for the webbing provide safety.• Revolver™ webbing adjustment. Quick adjustment and retraction of excess webbing, no troublesome webbing ends.• Repel™ webbing coating. Longer service life thanks to enhanced wear resistance. Water and dirt repellent.• Stand-up rear fall arrest eyelet.• Fall indicator, load display makes inspection quick and reliable.• Foot loops are integrated into the fall arrest harness to prevent suspension trauma.• Reflective textile sections.
Approved for weights of up to 140 kg
Standard: EN 361, EN 358, ANSI, OSHA and CSA versions available
The materials are soft and lightweight, yet extremely durable. The shoulder, hipand leg pads are built-in so that they cannot slip. The breathable lining keepsyou dry and comfortable all day while the quick-connect buckles are fast, effi-cient and totally secure.
• The ergonomic design incorporates integrated shoulder, hip and leg padding.• The soft edges move with you to prevent uncomfortable rubbing or chafing
and thus enhance comfort and mobility• No stand-up back D-ring• With i-Safe™ RFID tags for electronic data recording
Standard: EN 361, EN 358
ExoFit™ fall arrest harness, standard model
The ExoFit™ fall arrest harnesses have a wrap-around, no-tangle designthat slips on like a jacket, making them quicker and easier to put on whileproviding ventilation, comfort, padding and safety.
ExoFit™
standard fall arrestharness
Ideal fall arrest harnessfor all general usesKB1EXO/M
ExoFit™
fall arrest harness withpositioning harness
Hip pad and belt for usewith tool pouches. D-ringsalso on the sidesKB1EXO/MB
Type and Size
S M L
Weight
in kg
KB1EXO/S (/M) (/L) 1.74 (1.78) (1.82)
D-Rings
Back, front
Buckle type
Automatic lock
Positioning
harness
KB1EXO/SB (/MB) (/LB) 2.78 (3.0) (3.0) Back, front, side Automatic lock 4
Item no.
Size S(M)(L)
49AGEF2S(M)(L)
49AGEF4S(M)(L)
SALA ExoFit™ Nex fall arrest and positioning harness
Permissible user weight including equipment = 140 kg
ExoFit XP™, ExoFit Nex™ fall arrest harnesses size chart
Body weight in kg
Bo
dy
heig
ht in
m
46 www.carlstahl-fallprotection.com
ExoFit™Nex fall arrest harnesses ExoFit™Nex Rescue Rescue positioning lanyard
• Breathable 3D mesh lining with soft edging for comfort• Spring-loaded stand-up back D-ring with impact indicator• Integrated lanyard holder to eliminate the risk of tripping• Types 1113925 to 1113928 with climbing protection eyelet (no im-
age)
EN 361, EN 358
• Additional eyelets on the shoulder webbing for rescue• Particularly suitable for use in shafts and containers with narrow
access openings
• Rescue positioning lanyard: the spreader bar prevents the shoulderstraps from drawing together
EN 361, EN 1497Rescue positioning lanyard conforming to EN 357
• Suitable for rope-supported work, Tech-Lite™ sternal and dorsal fallarrest eyelets
• Stand-up rear D-ring, Duo-Lok™ quick-connect buckle with web-lockon the legs and chest area prevents unintentional slippage
• Equipment loops for attaching equipment or tools
EN 361, EN 358 and EN 813
1113900 1113970 to 11139731113910 1113925
1113960 to 1113963
Fall arrest and work positioning harnesses
Type and Size
S M L XL
Weight
in kg
1113900 (01) (02) (03) 1.86 (1.9) (1.95) (1.99)
D-Rins
Back, chest
Buckle type
Automatic lock
1113910 (11) (12) (13) 2.75 (2.81) (2.86) (2.92) Back, chest, side Automatic lock
Item no.
Size S (M) (L) (XL)
49AGNEXS00 (01) (02) (03)
49AGNEXS10 (11) (12) (13)
1113960 (61) (62) (63) 2.2 (2.3) (2.4) (2.5) Back, chest Automatic lock 49AGNEXSS (M) (L) (XL)
1113970 (71) (72) (73) 2.02 (2.06) (2.11) (2.15) Back, chest Automatic lock 49AGNEXRS (M) (L) (XL)
KF71201466 1.3 for attachment - 49AGNEXTR
1113925 (26) (27) (28) 3.0 (3.05) (3.10) (3.12) Back, chest, side
add. climbing protection eyelet
Automatic lock 49AGNEXHS (M) (L) (XL)
ExoFit™Nex Suspension fall arrrest harness
KF71201466
Permissible user weight including equipment = 140 kg
www.carlstahl-fallprotection.com 47
Fall arrest harnesses
Delta™II heat resistant fall arrest harness
The Delta™II fall arrest harnesses feature the patentedDelta™ no-tangle pad for extra comfort across the neck,shoulders and back.
This design holds the shape of the harness, making it easierto put on. This added comfort and ease of donning has great-ly improved worker acceptance and reduced the probability ofimproper usage. Our patented spring-loaded ‘stand-up’ backD-ring ensures quick and easy connection to your fall arrestdevice. A wide variety of models and options lets you find justthe right fall arrest harness for almost any work application.
Size „U“ = universal size – one size fits the most users; „Medium“ and „Large“ range
• Melting point of 425° C• Patented spring-loaded stand-up back D-ring for quick
and easy connection• Book-style labels make information and inspection logs
readily available• Forged alloy steel hardware for maximum strength
and durability• i-Safe™ - all fall arrest harnesses now come with i-Safe™
EN 361
Delta™ IINomex®/Kevlar® Fall arrest harness
Flame resistant Nomex®/Kevlar® webbingKB1K-P29
Other models available on request
Type and Size Description
KB1K-P29 (U) Nomex® / Kevlar®
D-Rings
Back
Buckle type
Pass thru buckle
Hip pad/belt
4
Belt loops
4
Additional
Nomex® / Kevlar®-web
Weight
in kg
1.45
Item no.
49AGKEV1
PVC Carrying bag Transportation bag
Type Weight in kg
PVC-Carrying bag, black 0.60
Size (h x Ø)
in cm
60 x 30
Capacity in litres
45
Item no.
49ZBPS01
Transportation bag 0.96WxLxH (30x45x35) 45 450T0000
Permissible user weight including equipment = 140 kg
48 www.carlstahl-fallprotection.com
The right level of safety for the task at hand
Which connectors are needed for anchorage points largely de-pends on the purchaser’s specific requirements: type of attach-ment, environment, connecting system etc.DBI-SALA offers the most comprehensive range of available con-nectors for anchorage points, rigorously tested to ensure thestrength you need. This means you can always find the best prod-uct to fit your requirements.
Anchorage points
An anchorage point is a secure point of attachment for the fall pro-tection system. The anchorage must be capable of supporting aload of 12 kN per worker attached to the anchorage or be de-signed, installed and used as part of a complete personal fall pro-tection system which maintains a safety factor of at least 2.Anchorage points can be certified (designed or engineered on sitefor fall protection) or non-certified (beams, trusses or other suitablystrong structures). Certified anchorages should be identified withpaint or special markings and noted on a site list.
Connectors for anchorage points
Connectors for anchorage points provide a means of attaching thesystem to the anchorage and can vary widely depending on appli-cation. Some of the common types are anchor slings, roof anchors,beam clamps, rail sliders, trolleys and eye bolts.
Anchorage points and connectors
Concrete D-ring anchorpoint
Reusable D-ring assembly: drill ahole in set concrete, insert andtorque the unit; for temporary orpermanent applications; fits 18 mmor 19 mm Ø holes (standard drillbits); rotates 360°.
SAFLOK® concrete wedge anchor
Provides temporary anchorage in concrete.For 1 person weighing up to 141 kg.Min. concrete strength class: C20/25Min. concrete base material thickness:12.7 cmBorehole diameter: 20 mmBorehole depth: 80 mmFor full installation information, seethe installation instructions.
Type
2104565
2104566
2104567
Standard + optional
Standard model
D-ring assembly with 6
additional bolts
D-ring assembly with 12
additional bolts
2100100
Weight
in kg
Type Diameter in
mm
0.55
0.65
0.75
Item no.
49APBET2
49APBET3
49APBET4
Item no.
49APBET519.5
Weight
in kg
0.354
Breaking load
in kN
22
CE EN 795 Class B
CE EN 795 Class B
www.carlstahl-fallprotection.com 49
Anchorage points
Door jamb anchorAnchorage points was installedagainst door or window frame.Required distance: 55 to 130 cm width.User: 1 Person / 141 kg
Glyder2™ sliding beam anchorFor horizontal mobility over heador at foot height. Integrated ratching adjustment forfast and easy installtion and removal.Flange: 8.75 to 35 cmUser: 1 Person / 189 kg
T-beam trolleyAnchor system runs at T-beam and ensures horizontal mobility.Measurements: for 7.6 - 20.3 cmbeamsMaterial: Aluminium / SteelUser: 1 Person / 141 kg
Fixed beam anchorCan be used horizontally and vertically.Material: AluminiumBreaking load: 22 kNUser: 1 Person / 189 kg2 fixed beam anchors can be con-nected with a mobile attachmentdevice.Can only be used for certain beamdimensions - see table.
A
B
Type
2100080
Breaking load
in kN
16
Material
Aluminium
Weight
in kg
6.35
Item no.
49APTUE1
CE EN 795 Class B
Installation options:
CE EN 795 Class B
CE EN 795 Class B
Type
2108412
Size of
beam flange
A
in cm
6.35 - 30.48
Weight
in kg
1.70
Item no.
49APFE01
2108413 6.35 - 45.72 1.75 49APFE02
2108414 6.35 - 60.96 1.80 49APFE03
2108415 30.48 - 91.44
Thickness
of I-beam
B
in cm
3.81
3.81
3.81
6.35 1.85 49APFE04
Type
2104700
Breaking load
in kN
22
Material
Aluminium
Weight
in kg
1.66
Item no.
49APGL02
CE EN 795 Class B
Installation options: Vertical steel post:
3
Type
KM22103148
Breaking load
in kN
22
Material
Alu/Steel
Weight
in kg
6.80
Item no.
49APTR01
50 www.carlstahl-fallprotection.com
Anchorage points, systems
Vacuum Anchor System Mobi-LokTM
• Tested for fall arrest and certified according to EN 795Class B. The big supporting surface ensures, that the capacity of the anchor pad exceeds the maximum breaking force by far.
• Lightweight design (lower than 10 kg) for a easy transport.
• Installation on various surfaces (also curved, with small diameter- at least 182 mm - and in any version).Versatile application, also overhead or at smaller planes.
• Version with integrated air bottle available. Faster installation,because pads can also be attached separately. Reduction of theequipment which has to be used and checked. For usage in situations which have no access to compressed air.
• Failure-free backup-systems with accustic alarms and vacuum level indication. Audio alarm sounds, when connection to the compressed air resource is interrupted or the vacuum niveau is under acceptable level.
• Button „alarm bypass“ for usage during installation. The user don’t has to suffer high alarm sounds and has to protect himself against them; everyone recognizing the alarm knows immediately, that a problem occurs and this is not the installation alarm.
• Can be used with synthetic horizontal fall arrest systems.For bigger mobility without the risk, that the plane could be damaged by the safety rope. Two-man and four-man version available.
• Mobi-LokTM anchor pads are using stop valves. They keep the vacuum, if the connection to the compressed air ressource is disconnected.
• Mobi-LokTM anchor pads have 3 inner sealing edges.They prevent leaks of the vacuum.
• ATEX-certification (electric/nonelectric). For usage in potentiallyexplosive areas.
www.carlstahl-fallprotection.com 51
Anchorage points, systems
Type Description
2200125 Mobi-LokTM primary system without bottle attachment
Mobi-LokTM primary system with bottle attachment
Mobi-LokTM secundary system without bottle attachment
Compressed gas cylinder
Fill station
Fill adapter for SCVA-bottle
Fill station adapter
Secondary pad air hose
Horizontal lifeline system for 2 users
Weight
in kg
8.00
10.46
6.80
3.0
0.90
1.50
0.080
2.10
4.77
2200126
2200127
2200085
2200086
2200087
2200196
2200130
2200409
Item no.
49APVU04
49APVU01
49APVU05
49APVU02
49APVUZB01
49APVUZB02
49APVUZB03
49APVUZB04
49APVUZB05
Mobi-LokTM primary system without bottle attachmentMobi-LokTM independent vacuum anchor without bottle attachment for situations, in which compressed air is always available (for aviation industry).
Mobi-LokTM secundary system without bottle attachmentMobi-LokTM independent vacuum anchor for aviation industry; secundary padfor connection to a primary pad.
Fill stationFor filling of the com-pressed gas cylinderfrom a tank.
Compressed gascylinderWith CE-sign0.8 l, 2.068 kPa (300psi).
Fill adapter for SCVA-bottleFor filling of the gascylinder from a airtank.
Fill stationadapterFor the connection ofthe fill station with thenitrogen bottle M25Connection typeBV102.
Secondary padair hose15 m hose for a con-nection of the primarypad with the secunda-ry pad.
Horizontal lifelinesystemHorizontal lifeline system (8 m);only for usage withMobi-LokTM.
Mobi-LokTM Systems
Mobi-LokTM Accessories
Type 2200125 Type 2200126
Type 2200127
Offer preparation after on-site inspection and consultation.
Type 2200085 Type 2200086 Type 2200087 Type 2200196 Type 2200130 Type 2200409
Mobi-LokTM primary system with bottle attachmentMobi-LokTM independent vacuum anchor system with bottle attachmentand carrying bag for aviation industry. It can be supported by one integra-ted 0.8 liter compressed air bottle (available separately) or a separatebottle with bigger capacity or compressed air. It also can support a additional secundary pad.
52 www.carlstahl-fallprotection.com
Anchorage points
Mobi-Lok vacuum anchor system
in accordance with EN 795, Class B
This vacuum anchor system is a self-contained system intended for useby one person. No separate pumps, vacuum hoses or other componentsare required for the system’s use. It can be quickly and easily started witha single integrated compressed gas bottle or workshop compressed air.The system can supply an additional, secondary vacuum anchor, to createa horizontal fall protection system for example. Other additional equip-ment available on request.
All of our vacuum anchors have interference-free back-up systems with anacoustic alarm and vacuum level indicator for complete safety.
Vacuum lifeline systems for the aviation industry available on request.
Specifications• Main support assembly: anodised aluminium• Vacuum seal pad material: natural rubber/polybutadiene blend• Electronics: 4 AA lithium batteries• Integrated compressed gas bottle requirements: 3 000 psi• Dimensions: 55 cm x 55 cm x 15 cm• System weight: 9.0 kg• Capacity: 140 kg; one person• Surface temperature range: -29 C to 60 C• Minimum vacuum anchor static capacity: 15 kN
Type Description
2200111 SCVA primary unit
Weight in kg
9.0
2200085 Compressed air bottle
Load capacity
140 kg / 1 person
-
Load capacity
in kN
15.0
- 3.0
Item no.
49APVU03
49APVU02
Type 2200111 Type 2200085
Offer preparation after on-site inspection and consultation.
www.carlstahl-fallprotection.com 53
Lanyards
Type 1245553 Type 1245554 Type 1245555
Type Length in m Weight in kg Item no.
1245553 2.0 0.90 49VMEZS53
Description
Trilock aluminium carabiner hook, both sides (20 mm)
1245554 2.0 1.10 49VMEZS54One side Trilock aluminium carabiner hook (20 mm),
other side scaffold hook (60 mm)
1245555 1.5 1.50 49VMEZS55At the lanyard automatic carabiner (20 mm),
other side 2 scaffold hooks (60 mm)
EZ STOP™ edge tested models
Who works today at posts, steel constructions, scaffolds, flat roof structures or radio towers, possibly uses shock absorbing lanyards which are nottough enough to resist a fall over those structures. DBI-SALA® therefor offers a new product range of lanyards which have been developed to offer moresafety to users who are in a risk of a fall over edges or in areas of edges. All protects were extensively tested over a edge radius of 0.5 mm. All edge tested products in the DBI-SALA® range contrast with the standard DBI-SALA® shock absorbing lanyards by the „edge tested“ logo.
• The kernmantle rope with 12 mm diameter offers extreme durability, but is flexible in use at the same time for a high usability. Orange marks indicatesthe suitability for a work in edge areas.
• Lightweight trilock aluminium carabiner for easy and safe attachment to the harness.
Specifications- Kernmantle rope 12 mm- Warning marks- iSafe™ transponder- Protected label pocket- Very small and lightweight shock absorberMax. user weight 100 kg
Standards: EN 354, EN 355
CarabinerTwist- or Trilock aluminium carabiner for a maximum safety
New shock absorbing lanyardSmaller and lighterMax. user weight 100 kg
Revolutionary news HI-10™ energy absorbingtechnologySmaller and lighterMax. user weight 100 kg
iSafe™Every product is equipped with atransponder chip for traceability,who can be read out duringinspection
LabelEasy access, complete protection
Nylon reflector stripes Better visibility at bad lightconditions
54 www.carlstahl-fallprotection.com
NANO-LOKTM retractable type fall arresters
NANO-LOK™ has a compact, ergonomic, user-friendly design that is perfect for directly attaching to most fall arrest harnesses. With a weight of just 725 g, you will barely notice it on your back, it does not hinder you during your work and it can also be used as an anchor strap. Thanks to its compati-bility with connectors at shoulder and foot level, its many different configurations and its capacity to bear up to 140 kg, NANO-LOK™ is suitable for manydifferent uses. The locking connector catches almost instantly and stops the fall after just a few centimetres to provide extra protection at low heights.Further-more, the lifeline remains taut at all times to reduce the risk of snagging, entanglement or tripping.
Retractable type fall arresters
www.carlstahl-fallprotection.com 55
Retractable type fall arresters
Type 1-leg
4
2-legs Length
retracted
in m
0.47
Length
extended
in m
1.83
Weight
in kg
1.143101260
Item no.
49HSGNA01
4 0.54 1.86 0.993101262 49HSGNA02
4 0.56 1.92 1.33101207 49HSGNA03
4 0.56 1.92 0.873101264 49HSGNA04
4 0.61 1.97 1.183101208 49HSGNA05
4 0.58 1.94 2.393101298 49HSGNA06
Y-connector
A connector directly integrated into theharness webbing with a plastic insertkeeps the two Nano-Loks apart.
Single leg connector
Galvanised steel catch with triple safetydevice. No additional karabiners required.
Press the release buttons to open the con-nector. Allow the safety pin to slide out.
Push the plastic insert upwards and thekarabiner gate inwards. Insert the karabinernose into the swivel eye on the retractabletype fall arrester and rotate it to the otherside.
Thread the connector through the loosenedloop beneath the rear fall arrest eyelet (D-ring), then pull the loop tight.
Slide the nose end of the karabiner behindthe loosened loop beneath the rear fall ar-rest eyelet (D-ring) and attach the secondretractable type fall arrester.
Re-insert the safety pin and push it throughthe swivel eye on the retractable type fallarrester. Press until the pin clicks intoplace.
Close the karabiner and rotate the plasticinsert inwards and downwards to securethe connector, making sure the loop passesthrough the slot on the insert.
NANO-LOK™ retractable type fall arrestersDirect attachment options to fall arrest harnesses
3101260 3101262 3101207 3101264 3101208 3101298
56 www.carlstahl-fallprotection.com
Retractable type fall arresters
NANO-LOK™ EDGE, webbing
Karabiner on the webbing
Aluminium Twistlock karabiner
Opening width: 19 mm
3101430
Nano-Lok™ web 1-leg
Length
in m
Type
2.40
Aluminium karabiner
Opening width: 57 mm
2.503101433
Weight
in kg
1.30
1.30
Item no.
49HSGNE01
49HSGNE02
3101440
Nano-Lok™ web 2-leg
Length
in m
Type
2.50
2.403101443
Weight
in kg
2.22
2.22
Item no.
49HSGNE03
49HSGNE04
NANO-LOK™ EDGE, Cable
Karabiner on the cable
Aluminium Twistlock karabiner
Opening width: 19 mm
3500224
Nano-Lok™ Cable 1-leg
Length
in m
Type
2.40
Aluminium karabiner
Opening width: 57 mm
2.503500244
Weight
in kg
1.70
2.10
Item no.
49HSGNE05
49HSGNE06
3500239
Nano-Lok™ Cable 2-leg
Length
in m
Type
2,40
2,503500241
Weight
in kg
2,90
3,85
Item no.
49HSGNE07
49HSGNE08
• Suitable for tie-off at foot level (fall factor 2)The special design minimises impact forces, while the automatic retraction of unused rope reduces the risk oftripping
• "Integrated energy absorber for adjustment in the area of the dorsal webbing cross on the fall arrest harness360° rotatable"Material: 20 mm wide Dyneema® webbing,max. person weight: 141 kgLeaves the suspension eyelet free, e.g. for rescue purpos-es
• Fulfils the CE standard on inspections over sharp edgesacc. to VG11.60, version 7 (edge radius 0.5 mm)
• Suitable for tie-off at foot level (fall factor 2)The special design minimises impact forces, while the au-tomatic retraction of unused rope reduces the risk of trip-ping
• Integrated energy absorber for adjustment in the area ofthe dorsal webbing cross on the fall arrest harness360° rotatable, max. person weight: 141 kgLeaves the suspension eyelet free, e.g. for rescue purpos-es, material: galvanised steel cable, Ø 5 mm
• Fulfils the CE standard on inspections over sharp edgesacc. to VG11.60, version 7 (edge radius 0.0 mm)
www.carlstahl-fallprotection.com 57
Retractable type fall arresters
58 www.carlstahl-fallprotection.com
Precision engineering
Proper engineering is critical for safe lifeline systems. Typical errors in-clude the improper calculation of the fall distance, not taking into ac-count sag in the lifeline and a lack of understanding of the existing build-ing structure.
When a fall is experienced on a horizontal lifeline, the load is magnifiedback to the anchorage, generating tremendous force. The amount of sag
amplifies the forces on the end anchors.
Other factors are the number of people secured to the system, the over-all length and the connection material used.
Selection guideProduct Description Area of application Installation Energy
absorber
Cable No. of users
(max.):
EZ-Line™ Temporary
Fastest horizontal lifeline to install and remove. Max. range 18 m.
The cable simply retracts inside the housing for transportation
and storage.
• Plant maintenance
• Bridge work
• Construction industry
• Production
Simple, no special
tools or equipment
required
Zorbit™ 6.25 mm
galvanised 1 - 2
depending on
the fall distance
Temporary horizontal lifeline systems
EZ-Line™ Temporary horizontal lifeline system
EZ-Line™ is the most user friendly and fastest horizontal lifeline to installand remove on the market today. The 18 m lifeline is simply pulled outfor installation and retracted into its housing with the built-in handle upondisassembly. No more unruly cable that is difficult to install, transportand store. Built-in tension and impact indicators take the guess work outof system set-up and maintenance. The extremely lightweight system is33% lighter than conventional 18 m systems. Complies with standardsDIN EN 795-C and OSHA.Required attachment anchor = 22 kN.
Please see the user instructions.
Range
in m
No. of users
18
Weight
in kg
11.25
Item no.
49TPEZ01
Type
7605061 2
www.carlstahl-fallprotection.com 59
Following the integration of the Uniline systems into the Capital Safety Group’s product range, new horizontal cable and rail-based fall protection systems are now available to us under the SALA brand. On request, we will gladly provide you with an on-site consultation.
Horizontal rail and wire rope systems
Uni Rail™
Uni 8™
Uni 8™ OverheadUni 16™
The Uniline® product range for horizontal fall arrest products has beendeveloped to offer multiple solutions for compliance with workplacesafety regulations. This enables our customers to efficiently and compliantly safeguard themselves against the situations and risks thatarise when working at heights. Whatever your situation, we always offer you high-quality services, technical support and products.
Uni Rail™
UniRail™ is the perfect choice for construction projects, especially thoseinvolving internal and external facade access, inspections and maintenance, including on walkways and suspended gantries. The product is also often used for suspended access work by rope accesstechnicians as it meets the requirements of both abseil and fall protection standards.
60 www.carlstahl-fallprotection.com
Horizontal rail and wire rope systems
Uni 8™
Uni 8™ is best suited to modern construction projects and refurbishmentsbut can also be used for industrial safety applications. Minimal movingparts and high grade materials ensure excellent durability and low operat-ing costs, making this a sound investment. Uni 8™ can be fitted to steelbeams, concrete and brickwork. When using special anchorages,it is also perfectly suited for use on older roof constructions.
Uni 8™ overhead
Uni 8™ overhead fall protection systems were primarily developed to meetthe needs of our customers in the industrial and transport sectors, espe-cially for lorries, trains and airplanes, crane runways and loading bays.The system has also resolved access and safety problems in the enter-tainment sector and in arenas or stadiums. This high-quality safety solu-tion can furthermore support heavy retractable type fall arresters withoutrestricting workers’ movement while working at height.
www.carlstahl-fallprotection.com 61
Horizontal rail and wire rope systems
RoofSafe™ railsRoofSafe™ anchorsRoofSafe™ cable system
The Uniline® RoofSafe™ product range offers incomparable safety forroof access during maintenance and inspection work. Users benefitfrom a broad range of products, including roof anchors, horizontal lifelines and horizontal rail systems, which offer you comprehensiveprotection on all roof types.
RoofSafe™ rails
The RoofSafe™ rail is a high-quality rail system made from extruded aluminium that offers users optimum safety while blending into your environment with an aesthetically pleasing appearance. Thanks to thefree-flowing attachment carriage and the lack of interim brackets to traverse, the rail is highly functional and enables users to keep theirhands completely free for their work rather than using them to securethemselves.
62 www.carlstahl-fallprotection.com
Horizontal lifeline systems
RoofSafe™ anchors
The Uniline® RoofSafe™ anchors from Capital Safety have been designedto eliminate or substantially reduce the risk of injury or death to opera-tives working at height whilst also ensuring the integrity of the structure towhich they are attached.
RoofSafe™ cable system
The RoofSafe™ cable system has been designed to complement theRoofSafe™ anchor range. It takes advantage of the low system loads gen-erated in the event of a fall. Providing the place of use, the system andthe structural parameters are right, multiple workers can use the systemat the same time. Anchors can be positioned at intervals of up to 12 m.The traversable interim brackets enable workers to move freely.
www.carlstahl-fallprotection.com 63
Working in confined spaces, Rescue and retrieval
> Confined and hazardous <Working in containers, silos and confined spaces
Containers, silos and confined spaces are located both above andbelow ground and encountered in many different ways in industry.The risk of an accident in such working environments is always
extremely high and should be given special consideration. Accidentreports indicate that work conducted in confined spaces is among themost dangerous types of work. As the confined spaces looked at heregenerally only have ‘person-sized access and exit openings’, special tech-nical equipment is required to both ensure safe working environments andrescue accident victims.
Since 2005, an important basis for these areas of work has been theGerman DGUV Practice 113-004 „working in containers, silos and con-fined spaces“. There are therefore clearly regulated access procedures,which specify that people should only access such places of work whenusing suitable fall arrest harnesses as personal protective equipment forthe pre- vention of falls.
Work in silos that is subject to such risks is not permitted without a fallarrest harness, approved winch and a suitable anchor device (e.g. tripod,davit arm).
Irrespective of the possible insertion depth, the positioning proceduredepends solely on the risk of sinking into the dry material. This means thatfor work in silos that should be carried out from a certain position, theusers must be positioned using suitable procedures. Furthermore, whenworking in silos, the planning and practising of emergency and rescuemeasures is also a permanent part of a functioning overall concept.
Carl Stahl can help you select the right equipment and also offers trainingand courses.
Reliability when you need it the most
When it comes to rescue situations, it is essential that equipment functionsperfectly and quickly. DBI-SALA has developed a complete line of rescueand retrieval systems that are more effective than any other in the industry.Safety engineers and site directors trust DBI-SALA in relation to this typeof high quality, robust systems that ensure top performance.
Rescue and retrieval are critical aspects of any fall protection pro- gramme.The fast and effective performance of these tasks often means the differ-ence between an injury-free fall and a fall resulting in serious damage tohealth.
Rescue and descent equipment choices depend on the work site condi-tions, the tasks being performed and the available manpower.
Rescue basics
• If the person can be reached without auxiliary aids - immediate assis-tance. Experience has shown that it does not suffice to leave rescue tothe local fire brigade. If rescue and retrieval measures are required, sev-eral teams are set up for immediate response.
• If descent to a fallen person is required, rescuers should always be se-cured by a secondary system such as a retractable type fall arrester thatis totally independent of the primary means of rescue.
• All rescue team members should receive training and participate in prac-tice exercises on a regular basis.
DBI-SALA retrieval and rescue equipment
64 www.carlstahl-fallprotection.com
Advanced Davit Arm System ComponentsVariable off set davits are designed for use where multiple off set masts are required. The variableoff set masts may be equipped with front mounted and/or back mounted winches or SRLs and fea-ture an anchor point rated up to 2,268 kg (22kN) depending on pin position. For applications withoverhead clearance restrictions, the adjustable height of the variable off set masts can eliminate theneed for custom length masts and mast extensions. Quick connect/release pins allow for fast andeasy set-up, dismantle and transport.
WINCHDavits can be equipped with both primary and sec-ondary (back-up) mechanical devices for addedflexibility.
QUICK-MOUNTING BRACKETSSimple detent style winch mounting bracketsmake installation fast and efficient.
3-WAY SRLDavits can be equipped with both primary andsecondary (back-up) mechanical devices foradded flexibility.
VARIABLE OFFSET MASTAdjustable length of davit ensureslifelines are always centered overconfined space.
BUILT-IN PULLEYSRoute lifelines of two mechanicaldevices for smooth, efficient oper-ation.
FALL ARREST ANCHORAGEUp to a 2,268 kg (22kN) ratedanchor point for fall arrest device.
ADJUSTABLE HEIGHTEliminates the need for customlength masts and extensions.
LOWER MAST EXTENSIONSAllow the user to increase the overallanchorage height of the system.
BASE OPTIONSSeveral portable and fixed baseoptions are available for com-plete versatility.
Working in confined spaces, Rescue and retrieval
www.carlstahl-fallprotection.com 65
Working in confined spaces, Rescue and retrieval
927 mm -1384 mm
838 mm -1092 mm
762 mm -1219 mm
305 mm -737 mm
Type 8568001 Type 8568006
Adjustable offset davit masts
Standard masts are delivered with a quick mountingbracket for DBI-SALA winch or retractable fall arresterof PS(15)-series. Other mounting brackets are avail-able.
Optional accessories
Lower masts and extensions
Lower masts and extensions are used with adjustable offsetdavit masts (left). Combine up to 2 lower mast extensions toreach requested anchoring height. Special lengths are available.Call us for further info.
Type
8568001
8568006
Weight
in kg
11.25
13.75
Item no.
49RT1013
49RT1014
533 mm
838 mm
1448 mm
Type 8568509 Type 8568002 Type 8568003 Type 8568004
Type
8568509
8568002
Weight
in kg
6.8
8.2
Item no.
49RT1015
49RT1016
8568003
8568004
9.5
10.9
49RT1017
49RT1018
Type 8562285 Type 8566190 Type 8560316 Type 8560826Type 8566191
8562285 Adjustable mount sleeve for edge areas, walls, upturn beams and barrels etc.
Wall thickness of up to 609 mm
25.20
8566190 Floor mount sleeve, fixed base 5.90
8566191 Wall mount sleeve, galvanised 5.40
8560316 Floor mount sleeve 9.50
Type Description Weight
in kg
Item no.
49RT1002
49RT1003
49RT1004
49RT1019
8510826 Heavy duty sleeve cap, galvanised 0.50 49RT1020
8510827 Heavy duty sleeve cap, stainless steel 0.40 49RT1020/1
1143 mm
Prices on request.
2 permitted extensions,maximum height of theextensions = 2268 mm
2 permitted extensions,maximum height of the extensions = 1981 mm
Type 8560827
66 www.carlstahl-fallprotection.com
5-piece modular hoist system
The Modular Series Hoist Systems are designed for manhole and confined space entry/retrieval applications.
These units are constructed on a modular design, using lightweight materials including high-strength aluminium. The davit is slewable foreasy rescue and the base is adjustable to fit most standard entries.Many other portable and fixed bases are available to suit and special requirements.
Winches and adpaters must be ordered separately.
Type
8568000
Description
5-piece modular hoist system
davit 295 - 688 mm
Weight
in kg
45.5
Item no.
49RT1006
8568040 5-piece modular hoist system
davit 596 - 1068 mm
62.3 49RT1010
Type 8568000
Type 8568005
Type 8568008
8568005 Modular 3-piece adjustable base for 737 mm maximum offset davit mast
Foot width: 940 mm to 1626 mm
27.3
Type Description Weight in kg Item no.
49RT1011
8568008 Modular 3-piece adjustable base for 1219 mm maximum offset davit mast
Foot width: 1778 mm to 2464 mm
41.8 49RT1012
Working in confined spaces, Rescue and retrieval
Modular 3-piece adjustable base
Prices on request.
Type 8568040
940 - 1626 mm
1778 - 2464 mm
940 - 1626 mm
596 - 1068 mm
2165
- 2
838
mm
1181 mm
295 - 688 mm
2007
- 2
540
mm
1829 mm
1270 mm
www.carlstahl-fallprotection.com 67
Working in confined spaces, Rescue and retrieval
Winch adapters
8518558 Digital winch, detachable handle
Type Description Item no.
49RTWD18Stainless steel
Rope type
18
Rope length in m
13.8
8518559 Digital winch, detachable handle 49RTWD27Stainless steel 27 14.7
8518579 Digital winch, detachable handle 49RTWD42Stainless steel 42 18.4
8518580 Digital winch, detachable handle 49RTWD58Stainless steel 58 19.54
Weight in kg
1
2
3
Type 8516285
Type 8516824
Type 8510207
1
3
2
8516285 For mounting on winch, fits to 8510207 0.85
Type Description Weight in kg Item no.
49RT1021
8510207 Winch/SRL adapter with flat back for mounting on winch 0.97 49RT1022
8516824 Quick Release mounting bracket for advanced upper and lower masts 0.70 49RT1005
Advanced digital winch
The digital winches can be used to a maximum capacity of 204 kg (safety factor 11:1). They areequipped with two speeds for rescue and descent. 3 standard sizes are available which are suit-able for different rope diameters from 9.5 mm up to 15.9 mm. All ropes come with an automatickarabiner with an integrated fall indicator.Approved for use as a winch for people and materials.
3
Prices on request.
Prices on request.
68 www.carlstahl-fallprotection.com
Working in confined spaces, Rescue and retrieval
SEALED-BLOKTM SRL with retrieval winch
The sealed retractable type fall arresters incorporate a revolutionary patented sealing technology that separates all dynamic components from foreign elements such as grease, moisture and dirt. Unparalleled in the industry, this truly sealed equipment ensures efficient, safe operation under all workingconditions.
• The most durable and robust unit available on the market• The self-adjusting disc brake limits arresting forces to 6 kN or less• Hard-wearing, impact-resistant stainless steel housing ensures long-lasting, reliable performance• L = 15 m, galvanised steel wire Ø 5 mm for excellent durability. Also available in 25 m and 39 m• Optional 3-way retrieval winch mechanism for efficient and convenient rescue operations• Horizontal and vertical use
Type 3400856 Type 3400956Type 3400881Type 3400986
3400856 SEALED-BLOKTM SRL
with retrieval winch
9
Type Description Rope length
in m
5 mm Stainless steel
Rope type
8.0
Weight
in kg
Item no.
49HSGAG9
3400956 SEALED-BLOKTM SRL
with retrieval winch
15 5 mm Stainless steel 13.0 49HSGAG15
3400881 SEALED-BLOKTM SRL
with retrieval winch
25 5 mm Stainless steel 20.0 49HSGAG25
3400986 SEALED-BLOKTM SRL
with retrieval winch
39 5 mm Stainless steel 27.0 49HSGAG39
Prices on request.
www.carlstahl-fallprotection.com 69
Working in confined spaces, Rescue and retrieval
8516480 40° Winch adapter 0.85 49RT1027
8516491 30° Winch adapter (without illustration) 0.85 49RT1041
8516824 Quick Release mounting bracket for advanced upper and lower masts 0.70 49RT1005
Type 8516480
Type 8516824Type 8516480
3401025 Winch mounting bracket for rope length = 9 m, 15 m, 25 m and 39 m 0.7
Type Description Weight
in kg
Item no.
49RT1023
Accessories
Type 3401025
Prices on request.
8560409 Extendable pole hoist 1.2 m to 2.13 m, extension with swivel head and witch mounting bracket,
T-Bar leg assembly and hardware/fasteners
5.4
Type Description Weight in kg Item no.
49RT1031
8561235 T-rod 3.18 49RT1033
8560476 Extendable pole hoist 1.8 m to 3.05 m, extension with swivel head and witch mounting bracket,
T-Bar leg assembly and hardware/fasteners
6.4 49RT1032
Extendable pole hoist
Type 8560409
Type 8560409
1500 - 1950 mm
Type 8561235
Type 8560476
1829 - 3048 mm
Extendable pole hoist 1.20 m to 2.13 m
Extendable pole hoist 1.80 m to 3.05m
Prices on request.
70 www.carlstahl-fallprotection.com
Type 8563161
8563161 Container fall arrest post 13.0
Type Description
Post/green items: Aluminium
Fittings: Steel
Surface: Power-coated
Material type
141 kg (1 person)
Load capacity Weight in kg Item no.
49RT1044
2100094 Telescopic rod “First-Man-Up” 4.0Aluminium - 49RT1045
2100105 Pipe hook, rod connection 0.30Aluminium - 49RT1046
Container fall arrest post
Advanced portable fall arrest post
Attachment pointonly for oneperson atsame time
Bracketsfor tensioning
Handlefor transport
Anchorageat container
ISO certified 20- and 40' standard containers have aheight of 2.59 m (8 feet and 6’’). A protection against fall during work on a containerwas not possible up to now.
The ISO container post from SALA offers a solution.The post is buckled on a edge of the container. Theheight of the attachment point increases by 1.25 m to3.84 m. Based on a length of the lanyard of 2 m and asafety distance of 1 m, there are just 0.84 m breakingdistance (bursting of the lanyard) left. The most lany-ards are not suitable for this. The NANO-LOKTM type fallarresters from SALA even already break at a fall of 0.60m and are the solution therefore (page 56).
Usage of type fall arresters with a horizontal applica-tion certification and lanyards with a maximumbreaking load of 6 kN.
The use of a fall arrest harness is strictly required!
Standard: DIN EN 795-2012, Class B
Climbing on the container:
Normally the climbing on the container is done with a ladder. 1. Be sure, that the ladder has a fixed location and cannot slip.2. Attach the 2-leg NANO-LOKTM type fall arrester to the loop of the pipe hook, who is attached to the „First-Man-Up“ telescopic rod. 3. Telescope the rod to the requested length and attach the pipe hook from a type fall arrester into the container post.4. Connect the above fixed type fall arrester with your fall arrest harness and climb up.5. Reached the top secure yourself with a second type fall arrester at the attachment point of the ISO container post.6. Unhook the first security from the container edge.7. Pull up the ISO container post with a rope.8. Clamp the post in the edge of the container.
Type 2100094 Type 2100105
Prices on request
www.carlstahl-fallprotection.com 71
Advanced portable fall arrest post
Advanced portable fall arrest post
The advanced portable fall arrest post has 3 independent swiveling tie-off points at 774 mm, 1092 mm and completely extended at 1384 mm.This reduces the fall height of a worker and therefore enlarges the working area for a maximum of 3 people.When using the anchor post extension type 8566692, only 2 workers may be anchored at any one time.*NOTE: the rescue davit arm only works in positions 2 and 4.
831.85 mm
1168.4 mm 1117.6 mm
1454.15 mm
774.7 mm
1092.2 mm
1054.1 mm
1384.3 mm
1. PositionCompletelyretracted
2. + 3. PositionPartly extended
4. PositionPartly extended*
1473 mm
Working area1.17 m2
Working area4.7 m2
Working area10.5 m2
610 mm
1220 mm
1829 mmSafe working area (radius)
Force of radius anchorage point:610 mm : 37.1 kN
1220 mm: 22.6 kN1829 mm: 18.7 kN
Type 8567412
Type 8517565
8566691 Advanced portable fall arrest post 17.5
Type Description Weight in kg Item no.
49RT1034
8566997 Uni anchor double-T-Beam base 25.5 49RT1035
8567412 Steel Uni anchor with tic-off beam anchors 5.3 49RT1036
8569819 Steel Uni anchor with screwable beam anchors 5.3 49RT1042
8566692 Anchor post extension 356 mm 2.2 49RT1037
8517565 Carrying bag for type 8566691 0.68 49RT1038
8567422 Anchor with ring, sandblasted (without illustration) 5.4 49RT1040
Type 8566691 Type 8566691 Type 8566691
Type 8566692
Type 8566997
Anchor post extension
356 mm
Prices on request.
Type 8569819
72 www.carlstahl-fallprotection.com
Advanced portable fall arrest post
www.carlstahl-fallprotection.com 73
Other options
“FlexiGuard” free-standing horizontal rail fall protection systems
74 www.carlstahl-fallprotection.com
Lifelines
ABS-Lock® SYS I
The SYS I is ideal for use overhead, on facades or on maintenance bridges in storage,maintenance or production halls. In other words, anywhere people can be securedalong a single cable field and attach/detach themselves to/from the system (field-to-field) in the safe area.• Ø 8 mm V2A cable• Max. 10 people
ABS-Lock® SYS II
Fitted with a special glider, the user can freely move across all interim brackets andcorner elements. The SYS II is therefore ideal for use on facades and crane systems,as well as when installed overhead, e.g. in bus and aircraft maintenance sheds andhangars.• Ø 8 mm V2A cable• Fully traversable brackets and corner elements thanks to glider• Max. 4 people• Suitable for overhead use
ABS-Lock® SYS III
Like the SYS I but equipped with a highly flexible, easy-to-attach 6 mm cable. Thismakes the system particularly cost effective to use and install.• Ø 6 mm V2A cable• Non-traversable brackets• Max. 4 people
ABS-Lock® SYS IV
Like the SYS II but equipped with a highly flexible, easy-to-attach 6 mm cable. Thetraversable attachments are particularly suited for use on flat roofs with little freespace before the fall edge (e.g. on photovoltaic systems) or on the side of mainte-nance bridges on crane runways where is it not possible to detach and reattach thelanyard.• Ø 6 mm V2A cable• Fully traversable brackets and corner elements• Glider made from special bronze alloy• Max. 4 people
ABS lightning conductor clamp
The ABS lightning conductor clamp with connector cable enables you to directly con-nect your 6 mm or 8 mm stainless steel ABS-Lock® SYS cable systems to an existinglightning conductor.
Vertical fall protection cable systems
SafetyHike®
Vertical fall protection cable system with a stainless steel guidecable and guided type fall arrester for up to four people per lifeline.
All systems, components and individual parts available on request!
ABS-Lock® SYS product rangeStainless steel fall protection cable systems conforming to EN 795 class C,in various versions:
Specifications
• FREELY rotating anchor eyelet!• For simultaneous use by three
people• Torque: 70 Nm• Manufactured completely from 1.4571
stainless steel• Vulcanised fibre disc and seal prevent
water from seeping in around the bore hole• 3 people acc. to EN 795, ANSI Z359.1
2 people acc. to EN 50308• Load capacity: 22.4 kN• For screwing into metric threads M12, M16 and M20
available on site or securing using a bore hole (16-17mm) with attachment material position and
• Installation: also suitable for overheadand wall mounting as well as pressure zones
3 4
www.carlstahl-fallprotection.com 75
Thread
M16
M16
-
Anchorage points
ABS-Lock® III-R steel, 360° rotatable anchorage point
The system has been developed to provide a secure single anchorage point for simultaneous use by up to three people. It is approved and CE-tested in accordance with DIN EN 795 as a class A and B anchorage point and conforms to EN 50308.
1
2
3
4
ABS-Lock® L3-ST-0-18-R-M12ABS-Lock® L3-ST-0-24-R-M16ABS-Lock® L3-ST-0-30-R-M20ABS-Lock® L3-ST-0-50-R-M16
Specification plate
Upper seal
Lower seal
Nut
1
2
ABS-Lock® L3-B-0-80-R-M16
Specification plate
Thread installation
1
2
Specifications
• FREELY rotating anchor eyelet!• For simultaneous use by 3 people• Bore: min. 70 (standard: 100 mm)
deep, Ø18 mm• Manufactured completely from
1.4571 stainless steel• 3 people acc. to EN 795
2 people acc. to EN 50308• Load capacity: 22.4 kN• Two-component adhesive, e.g.
Würth WIT-C 100/150/200, Hilti HITor similar, Fischer FIS V, UPAT UPM44
• Concrete quality min. C20/25, B25• Special adhesive available for order,
type ZU-1017, 150 ml (see table)• Installation: also suitable for over-
head and wall mounting as well aspressure zones
Thread length
in mm
Mounting
50
Weight
in kg
0.45
Item no.
49AL3ST050R
Type
L3-ST-0-50-R-M16 Securing
M2030 0.40 49AL3ST030RL3-ST-0-30-R-M20 Screwing in
M1624 0.40 49AL3ST024RL3-ST-0-24-R-M16 Screwing in
M1218 0.35 49AL3ST018RL3-ST-0-18-R-M12 Screwing in
80 0.50 49AL3B080RL3-B-0-80-R-M16 Gluing
1
2
3
4
Attachment optionson steel structures
Inst
alla
tion
dep
th m
in. 7
0 m
m
- 0.34 49AZU-1017ZU-1017 -
Attachment options in concrete
ABS-Lock® III-B concrete, 360° rotatable anchorage point
L =
80
mm
Anchor eyelets available powder-coated in all RAL colours for a special price.The lengths 18, 24 and 30 mm are supplied without the seal and nut (for screwing in).
L =
18,
24,
30
or 5
0 m
m
76 www.carlstahl-fallprotection.com
Retractable type fall arresters
The ABS B-LOCK type fall arresters are for universal use and always available in different versions. The solid housings made from extreme lightweight,UV resistance and weatherproof plastic ensure a high durability of the product. Due to its manufacturing out of special plastic and their rounded shapethe ABS B-LOCK type fall arresters up to 3.5 m are suitable especially for a mobile operation and allow the usage directly at the body. The ABS B-LOCKtype fall arresters at 6 m are ideally usable in conjunction with rope systems and roller gliders. The ABS type fall arresters are all delivered with a doublesecured Twistlock karabiner hook according to EN 362:2004.
How a retractable type fall arrester works: A retractable type fall arrester works in accordance with the principe of a safety belt from a car. During work the rope- or web-length adapts independ-ently with a maximum speed of 0.5 meter per second to the required length, without a interfere of the user. If this speed is exceeded, the pawls withinthe retractable type fall arrester lock by centrifugal force. The specially integrated breaking system also serves as a shock absorber and limits the occu-ring forces which can impact to a human body, to approx. 3-4 kN (depending on weather conditions and application) - so the required score from theDIN EN standard of 6 kN is significantly fallen short.
www.carlstahl-fallprotection.com 77
Retractable type fall arresters
Type Length in m Item no.Description
PS-BL-B-3.5 3.5ABS-B-LOCK 3.5 m 49HSGPSBLB35
PS-BL-S-3.5 3.5ABS-B-LOCK 3.5 m 49HSGPSBLS35
PS-BL-B-2 2.0
Weight in kg
2.1
2.6
1.7ABS-B-LOCK 2 m
Connection type
Web
Steel wire rope
PS-BL-B-6 6.0ABS-B-LOCK 6 m 49HSGPSBLB063.5Web
PS-BL-B-12 12.0ABS-B-LOCK 12 m 49HSGPSBLB126.1Web
PS-BL-S-6 6.0ABS-B-LOCK 6 m 49HSGPSBLS064.2Steel wire rope
PS-BL-S-10 10.0ABS-B-LOCK 10 m 49HSGPSBLS104.5Steel wire rope
PS-BL-S-15 15.0ABS-B-LOCK 15 m 49HSGPSBLS156.9Steel wire rope
PS-BL-S-20 20.0ABS-B-LOCK 20 m 49HSGPSBLS207.2Steel wire rope
PS-BL-S-25 25.0ABS-B-LOCK 25 m 49HSGPSBLS2512.5Steel wire rope
PS-BL-S-30 30.0ABS-B-LOCK 30 m 49HSGPSBLS3013.0Steel wire rope
Web 49HSGPSBLB02
ABS B-LOCK retractable type fall arrester with integrated fall indicatorThe above shown B-LOCK series , and are all equipped with fall indicators. For this purpose there is a coloured mark at therotation axis of the karabiner. If this mark shows „red“ the type fall arrester has to be taken out of usage and checked.
Double indicator: Additionally the rotation axis of the karabiner blocks. Then the type fall arrester has to be send to a repair service.
21 22 23
ABS B-LOCK 2 mExtreme lightweight type fall arrester Perfectly suited for a use at the body(Chest- or Back D-ring of the harness)
• 26 mm web, length 2 meter from polyamide,strength: 15 kN
• Standard: EN 360• Compact, extreme lightweight shape• The swivel suspension at the top and the
bottom prevents a twisting of the web • Including fall indicator at the karabiner
ABS B-LOCK 3.5 mType fall arrester with wire rope or web, extentable up to 3.5 m in a robust special plastic housing
• Optionally with polyamide web 25 mm, with astrength of 15 kN or with a galvanised steelwire rope Ø 4.8 mm with a strength of 12 kN
• Standard: EN 360, including fall indicator atthe karabiner
• Snap-karabiner with swivel suspension prevents a twisting of the rope/web
ABS B-LOCK 6 - 30 mUniversal type fall arrester with plastic housingwith steel wire rope or web in different lenghtsfrom 6 to 30 m.
• Optionally with polyamide web 25 mm, with astrength of 15 kN or with galvanised steel wirerope Ø 4.8 mm with a strenght of 12 kN
• Standard: EN 360• Including fall indicator at the karabiner• Swivel suspension at the top and bottom
12
3
1
2
3
3
2
3
3
3
3
3
3
78 www.carlstahl-fallprotection.com
Attachment point AirAnchor
Features
The ABS AirAnchor protects users during work in dangerous heights. The 360°free rotatable hoist system secures users in a working radius of 6.50 m around apillar, so that the user can move freely in a area of approx. 130 m².
The extreme robust steel hoist system is equipped with a retractable type fall arrester and weighs 80 kg. The provided webbing sling allows a placement by acrane. The ABS AirAnchor is certified in accordance to DIN EN 795.
Installation options
The ABS AirAnchor offers industry-specific installation options: on construction siteshe was attached into existing concrete pillars with a tube or screwed with a tripod intothe ground - a cost intensive net tensioning is mostly not necessary. Within a industrialusage the installation can be done by clamps directly to a steel beam. And for a workon vehicles a stabilization to the vehicle itself is possilbe: Therefor the vehicle runswith its tires on a additional part at the tripod.
Technical specifications
• Cantilever, secures 1 person• Total height 4.30 m, cantilever length 2.50 m• 360° rotatable, working radius 6.50 m, secured area approx. 130 m²• Including retractable type fall arrester (variable extension lengths possible)• Including grab-hook and webbing sling for positioning• optional: tube for concrete pillar• optional: tripod• optional: clamps for steel beams• optional: down-weight with vehicle
360° rotatable hoist system, Fall protection for 1 person, application in construction industry, industry and logistics
www.carlstahl-fallprotection.com 79
Attachment point AirAnchor
Technical illustration
1
2
3
4
Cantilever
Retractable type fall arrester
Tube for set in concrete
Webbing sling for positioning
1
2
3
4
ABS AirAnchor during machine maintenance - steel clamps allow a easy installation to the beam.
Safe on trucks and construction site vehicles - the tripod of the ABS AirAnchor is tight screwed to the ground.
Installation options:
• Airanchor with tube for set in concrete• Airanchor with tripod doweled• Airanchor with load from truck• Airanchor with clamps to steel constructions
Proposal preparation after on-site check or clearly project plans. Please contact us.
Type Item no.Description
AA-TUBE
Weight in kg
2.71Tube for set in concrete 49AAHUELSE
AA-ADJUSTMENT TOOL 3.96Adjustment tool 49AAAUSRIHI
AA-AIRANCHOR 83.25Cantilever, hook, sling 49AIRANCHOR
AA-BL-COVER 2.58ABS B-LOCK with weather protection 49AABLHAUBE
AA-UK-TRIPOD 98.16Tripod substructure 49AATRIPOD
AA-TRUCK 585.00Counterweight for truck 49AALKW
AA-UK-STEEL 13.78Mounting to steel substructures 49AAUKSTAHL
80 www.carlstahl-fallprotection.com
Anchorage point for containers
Application area
The ABS-Lock® X-Flat was especially developed for the fall protection ofpersons during work on containers. The anchorage point is particularlyflat, so that the containers can be stacked furthermore easily. The anchorage point secures up to 3 persons at the same time in accordanceto DIN EN 795:2012 (A).
Operation and installation
The person anchorage point ABS-Lock® X-Flat will be installed easily by14 blind rivets and offers a optimum protection for a underground thickness beginning at 0.5 mm. He is completely manufactured from corrosion-resistant stainless steel and covers a integrated sealing.
Application
Technical specifications
Attachment ring
Attachment ring
Fixation with 14 blind rivets (included in delivery)
Sheet thickness minimum 0.5 mm
• Anchorage point acc. to DIN EN 795:2012 (A)• Especially for installation on containers• Extremely flat, containers can be stacked• From corrosion-resistant stainless steel• Secures 3 persons at the same time• Always to be used with shock absorber (EN 355)• For the connection of two X-FLAT anchorage points the horizontal
lifeline-system ASK8, page 81 can be used.
1
2
3
4
1
4
2
3
Type Item no.Description
ABS-Lock® X-Flat
Weight in kg
Anchorage point acc. to DIN EN 795:2012 (A) 49APXFLAT
X-Flat
X-Flat
1.9
333 mm / 13 7/64’’
280 mm / 11 1/32’’
www.carlstahl-fallprotection.com 81
Horizontal Lifeline system
Type Item no.Description
PS-1013-15
Weight in kg
Horizontal lifeline rope, polyamide Ø 14 mm, L = 15 m 49MAASK8/153.0
PS-1013-23 Horizontal lifeline rope, polyamide Ø 14 mm, L = 23 m 49MAASK8/234.0
PS-1013-30 Horizontal lifeline rope, polyamide Ø 14 mm, L = 30 m
Freely movable karabiners
Number
1
2
3 49MAASK8/305.0
Standard: EN 795 Class B, Class C
PS-1013-15 PS-1013-23
ABS ASK 8 as a lifeline system on a steep roof.
PS-1013-30
Type Weight in kg
PVC-Carrying bag, black 0.60
Size (h x Ø)
in cm
60 x 30
Capacity in litres
45
Item no.
49ZBPS01
Transportation bag 0.96WxLxH (30x45x35) 45 450T0000
PVC Carrying bag Transportation bag
ABS ASK 8 is a horizontal lifeline-system in accordance to EN 795 Class B + C for a temporarily use especially during a connection of two X-FLAT anchorage points on a container.
Also for a use on flat- and steep roofs by latching to preinstalled anchorage points. A 14 mm diameter kernmantle rope is the basis for the horizontal lifeline system. The fall protection sytem is permitted for a maximum distance of up to 20 meter without intermediate brackets, at a attachment to twosolid attachment options (e.g. steel beam) if necessary, because the kernmantle rope stretches less than a common rope during a fall. Therefor the falldistance will be extremely reduced.
82 www.carlstahl-fallprotection.com
Anchorage points
www.carlstahl-fallprotection.com 83
Anchorage points
PSA-VRS STARPOINT
The RUD PSA-VRS STARPOINT anchor devices areattachment points for attaching personal protectiveequipment.
The PSA-VRS STARPOINT anchorage points can belong-term attached to a structure but are not intendedfor permanent outdoor use. The PSA-VRS STAR-POINT devices comply with the EU Directive on per-sonal protective equipment (89/686/EEC) and are la-belled with both the CE mark and the number ofpeople who can be carried (1 or 2 people).The valid test specifications are DIN 795, DIN 50308and OSHA 1926.502. The test forces of 22.2 kN/ per-son therefore exceed the requirements of the Euro-pean standard.The PSA-VRS STARPOINT devices have been suc-cessfully certified by the German employers’ insur-ance association for the building industry.
PSA-INOX STAR
The RUD PSA-INOX STAR anchor devices are at-tachment points for attaching personal protectiveequipment. The non-corrosive, bright-yellow-coatedPSA-INOX STAR devices can be permanently at-tached to a structure and used outdoors.The PSA-INOX STAR devices comply with the EUDirective on personal protective equipment(89/686/EEC) and are labelled with both the CE markand the number of people who can be carried (1 or 2people).The valid test specifications are DIN 795, DIN 50308and OSHA 1926.502. The test forces of 22.2 kN/ per-son therefore exceed the requirements of the Euro-pean standard.The PSA-INOX STAR devices have been success-fully certified by the German employers’ insuranceassociation for the building industry.
Type Dimensions in mm Thread length L
in mm
Item no.
D
7997100 30
Load capacity
1 person
Description
PSA VRS M12
E
30
T
56 18
Weight
in kg
0.2 49APDB02
8600400 301 personPSA VRS M12 30 56 18-150* - 49APDB06
7997854 35max. 2 peoplePSA VRS M16 35 65 24 0.32 49APDB03
7982222 40max. 2 peoplePSA VRS M20 42 75 30 0.56 49APDB07
*Variable length
Type Dimensions in mm Thread length L
in mm
Item no.
D
7997097 30
Load capacity
1 person
Description
PSA-INOX-STAR M12
E
30
T
56 18
Weight
in kg
0.19 49APDB01
7997820 301 personPSA-INOX-STAR M12 30 56 50 0.22 49APDB05
7996757 35max. 2 peoplePSA-INOX-STAR M16 35 65 24 0.31 49APDB04
7980921 40max. 2 peoplePSA-INOX-STAR M20 43 74 30 0.53 49APDB08
84 www.carlstahl-fallprotection.com
2
4
3
1
6
5
In accordance with DINEN 360, retractable typefall arresters must beannually inspected toensure they are fullyfunctional. We will glad-ly conduct this inspec-tion on your behalf.
1
2
3
5
6
Aluminium tripod EN 795 Adjustable in 5 positions
incl. 2 pulleys
Carol TS winch 250 kg including bracket(without rope)Rope capacity: 20 mRope-∅: 5 mm
4 Rope for Carol winch Ø 5 mm, L = 20 mwith karabiner M47
Blocfor 20 R in acc. to EN 360 and EN 1496 Class BSRL with integrated winch 20 m
Bracket for Blocfor 20 R
7
7
Descent equipment/rescue
Equipment bag for transporting and storing thetripod (coated canvas)Dimensions approx.: 1900 x 290 x 290 mm (L x W x H)
Fig.
Nr.
Type Item no.
108789 49RTTRAC
66568 49RTERRO
58199 49RTCAROL
18042 4940.75.01
29968 4940.75.03
Weight
in kg
22.0
1.40
10.0
11.5
3.0
31572 4940.75.071.80
Description
Aluminium tripod in acc. to DIN EN 795 incl. 2 pulleys
Carol TS winch 250 kg (without rope) incl. bracket
51042 4940.75.062.5Rope for Carol winch Ø 5 mm, length 20 m,
load capacity 250 kg with karabiner M47
Blocfor 20 R - retractable type fall arrester with integrated
winch L = 20 m, EN 360, EN 1496 Class B
Bracket for Blocfor 20 R
ISC equipment bag for aluminium tripod
1 2
2
3
4
5
6
7
Spare pulley
www.carlstahl-fallprotection.com 85
Stopfor™ KStopfor™ KSMGuided type fall arresters in the Stopfor K series, detachable from therope, integrated energy absorption by tilting the device. Approved forhorizontal and vertical use in accordance with EN 353-2 and EN 358.
The StopforTM K is a new kind of guided type fall arrester that combinessimple use with outstanding running characteristics. The StopforTM K isdesigned for use during vertical work and access (ladders, scaffolds,towers, masts etc.).Its ergonomic and robust design makes it quick, simple and secure to attach the device to a static kernmantle guide rope (diameter: 10.5 - 12.5mm).
Static kernmantle rope for Stopfor™ K with karabiner and end stopCertified to EN 1891
Guided type fall arresters, mobile anchorage point
Stopfor™ K
Without lanyardM10 karabiner
Stopfor™ KSM
With lanyard, M42 kara-biner, webbing length 30cm, reverse brake andreinforced springs
98469 49MASTOPKM10Stopfor K
Type Item no.
51172 49MASTOPKSMM42Stopfor KSM 0.3-M42
karabiner
0,55
0,63
Weight
in kg
Description
37532 49SESTOP05511
Type Item no.
37542 49SESTOP101011
Length
in m
M10
M10
karabiner
0,375
0,750
37552 49SESTOP151511 M10 1,125
35562 49SESTOP202011 M10 1,50
37572 49SESTOP303011 M10 2,25
Weight
in kg
Rope ø
in mm
1
2
3
4
86 www.carlstahl-fallprotection.com
rollbeamTrolley with anchorage hole in accordance with DIN EN 795, Class B
For anchoring one person to a T-beams or similar profile with a minimum load-bearing capacity of 10 kN, 4 metal rollers. Smallest traversable curve radius: 1.0 m. Anchorage hole opening: 30 mm.
54369 49APTR0210.5050 - 220
Type Item no.
88559 49APTR0311.00220 - 300
Weight
in kg
Flange width
in mm
Anchorage points, retractable type fall arresters
Flexible anchorage point, rollclampFor creating a mobile anchorage point on T, H and I beams for safely working withgreat freedom of movement. Thanks to the four castors, the rollclamp automati-cally moves along the beam as the user moves.
86009 49APROLLCLMfor flange widths of 80–360 mm,
flange thickness of up to 45 mm
rollclamp M
Type Item no.
86019 49APROLLCLLfor flange widths of 80–640 mm,
flange thickness of up to 100 mm
rollclamp L
Description
1.50
2.10
Weight
in kg
Model
www.carlstahl-fallprotection.com 87
Blocfor™ 10 AESThe retractable type fall arrester with automatic winding has been equipped with Tractel® ’s new andpatented absorbing end system (AES). • Usable length: 10 m• Low maintenance costs• Automatic winding• Approved for vertical use• Suitable for horizontal use with an LS 30 lanyard• Available with galvanised wire, synthetic fibre and stainless steel cable (on request)
Blocfor™ retractable type fall arresters
The Blocfor™ retractable type fall arresters automatically block the extension of the rope in the eventof a fall; the fall height is minimised by the immediate tripping of the brake. The rope length is auto-matically adjusted by means of the integrated return spring, providing the user with great freedom ofmovement.The Blocfor™ devices can also be used horizontally with a webbing lanyard (LS 30-2-10) attached be-tween the end of the rope and the fall arrest harness.The Blocfor™ range complies with standard EN 360.
58612 49HSGB10AESgalvanised wire rope with
karabiner M46-M10
Blocfor™ 10 AES
M46-M10
Type Item no.
35032 49VMLS30for horizontal using of
Blocfor™ 10 AES
Lanyard
LS 30-2-10
Description
4.86
0.4
Weight
in kg
247 x 190 x 96
Length: 2m
karabiner M10
L x W x HModel
60402 49HSGB5ESD5 m webbing with fall
energy absorber
Blocfor™ 5 ESD
M47-M10
Type Item no.
60392 49HSGB6ESD6 m webbing with fall energy
absorber
Blocfor™ 6 ESD
M47-M10
Description
2.0
2.1
Weight
in kg
181 x 136 x 68
181 x 136 x 68
L x W x HModel
Blocfor™ 5 ESDThe new retractable type fall arrester with 5 m long webbing offers you the following advantages:• Light and easy to handle, with a weight of just 2 kg• Easy to install• Automatic winding• Rotatable connector• Only 10 spare parts• Approved for horizontal and vertical use• Enhanced safety in the event of a fall
Type 35032
88 www.carlstahl-fallprotection.com
www.carlstahl-fallprotection.com 89
Fall arrest and work positioning harnesses
ARG51 Formotion WindThe ARG51 Formotion Wind is based on ten years of experience, making it the optimum harnessfor the field of wind energy. The harness has click buckles to make it easy to put on. The centralchest eyelet can be perfectly adjusted, centred by four buckles and positioned tightly against thebody. This makes the harness more comfortable to wear and reduces the fall-back risk. The sidering allows the four bands to independently move together, facilitating climbing and bending.The side holding eyelets can be folded backwards to make it easier to climb through confinedspaces. The special synthetic slideboard on the back protects the back, harness and towerwhen climbing wind turbines and descending into shafts.
Area of use:Wind energy
Standard:EN 358, EN 361, ANSI Z359.3-2007, ISO 10333-1:2000, AS/NZS 1891.1:2007, CA:21.389, GOST 12.4.224-99, GOST 12.4.205-99, CSA Z259.10-06 Class A, L, P
Type Size Weight in kg Item no.
G-0051-WS-M/L M-L 3.3 49AGS51M/L
G-0051-WS-L/XXL L-XXL 3.3 49AGS51L/XXL
Rescue PRO 2.0The original development idea came from the design of a harness for conducting maintenancework on wind turbine rotor blades.This resulted in the development of the rope access technology for the fall arrest harness in cooperation with well-known members of the leading rope access associations.The special padding around the hips and legs ensures good wear comfort even when working in the harness for prolonged periods.Max. permissible person weight: 140 kg
Area of use:Wind energy, catenary and overhead cable construction, telecommunication, rope access technology, rescue
Standard:EN 358:1999, EN 361:2002, EN 813:2008
Type Size Weight in kg Item no.
G-1083-AL-XS/M XS/M 2.6 49AGREXS/M
G-1083-AL-M/XXL M/XXL 2.6 49AGREM/XXL
G-1083-AL-XXL/5XL XXL/5XL 2.6 49AGREXXL/5XL
ARG59 UtilityThe ARG59 Utility has been specially developed for the field of catenary and overhead cableconstruction. The harness offers the following benefits: quick-connect click fasteners to makethe harness easy to put on. The harness has a ventral double-buckle strap to prevent any shifting due to the weight hung on the harness. The two side rings allow the four bands to independently move together, facilitating climbing and bending. A dorsal connection has beencreated between the waist belt and the shoulder strap to evenly distribute the tool weight andpadding has been provided in the shoulder area to reduce pressure. Once the harness has beenadjusted, the remaining belts are affixed to the harness so that they can no longer slip. This eliminates the need to constantly re-adjust the harness.
Area of use:Catenary and overhead cable construction, industrial use and steel construction
Standard:EN 358, EN 361
Type Size Weight in kg Item no.
G-0059-M M 2.95 49AGS59M
G-0059-L L 3.00 49AGS59L
G-0059-XL XL 3.05 49AGS59XL
90 www.carlstahl-fallprotection.com
Fall arrest and work positioning harnesses
ARG30 HRSLike the ARG30 but with side holding eyelets for optimal work positioning. The back support onthe rear offers additional wear and holding comfort.
Area of use:Industrial use, maintenance, construction, fire brigade, rigging, steel construction, telecommunications
Standard:EN 358, EN 361, GOST 12.4.205-99, LA-Mark
Type Size Weight in kg Item no.
G-0030-HRS Unisize 1.7 49AGS30HRS
ARG30 EThe ARG30 E is specially designed for the descent into and rescue from shafts. When used withthe V-band, people can even be rescued from the narrowest of shafts. This is because the harness has rescue eyelets in the shoulder area that allow the person to be pulled straight out of the shaft.
Area of use:Sewerage systems work
Standard:EN 361
Type Size Weight in kg Item no.
G-0030-E Unisize 1.7 49AGS30E
ARG30The ARG30 is the all-rounder for maintenance work and construction. It is lightweight, uncompli-cated and yet still provides maximum safety. The adjustable buckles in the shoulder and leg areas mean that the ARG 30 can be quickly put on, taken off and adjusted. The harness beltcannot slip while the harness is being worn and sits compactly against the body, even in casesof head-first falls. The steel central chest eyelet meets the EN 361 standard and is suitable as afall-arrest eyelet as well as for rescue.
Area of use:Industrial use, maintenance, construction, fire brigade, rigging
Standard:EN 361, GOST
Type Size Weight in kg Item no.
G-0030 Unisize 1.1 49AGS030
www.carlstahl-fallprotection.com 91
Fall arrest harnesses, helmets
ARG 31 SKYFIZZ Lifter ClickThe harness is ideal for work on working platforms, but also for all other uses. It has an extreme-ly resilient front and rear suspension eyelet made from robust steel. The click fasteners make theharness easy to handle and put on. The central chest eyelet sits perfectly against the body. Thecomfortable back padding makes it easy to put on the harness, distributes the load evenly and isbreathable. The crossed harness straps are sewn on to the back padding and distribute the loadperfectly. The double-coated and firmly sewn belt ends prevent the harness from slipping.
Area of use:Working platforms, industrial use, maintenance, steel construction, construction
Standard:EN 361
Type Size Weight in kg Item no.
G-0031-LC Unisize 1.6 49AGS31LC
G-0031-LC-M/L M/L 2.1 49AGS31M/L
G-0031-LC-L/XXL L/XXL 2.1 49AGS31L/XXL
V-BandFor use when descending into shafts or containers with harnesses such as ARG21 or ARG30 E.
Area of use:Descending into shafts and containers
Standard:EN 354
Type Weight in kg Item no.
L-0151-0.5 0.2
Length in m
0.5 49AGS15105
BE-016-SWSBE-016-BL BE-016-OR BE-016-WEBE-016-RO BE-016-SWM
Type Size
in cm
Item no.
BE-016-BL 62-63 49HE016BL
Weight
in kg
0.43
Colour
blue
BE-016-OR 62-63 49HE016OR0.43orange
BE-016-RO 62-63 49HE016RO0.43red
BE-016-SWM 62-63 49HE016SWM0.43matt black
BE-016-SWS 62-63 49HE016SWS0.43black
BE-016-WE 62-63 49HE016WE0.43white
SKYCROWNThe SKYCROWN is a classic! Optimal air circulation as a result of the integrated venting-system and the interiorpadding ensures best wearing comfort. The SKYCROWN can be individually adusted with just one hand to therequired head circumference by a small wheel on the backside.
Standard: EN 397
92 www.carlstahl-fallprotection.com
Positioning slings, lanyards
LOOP 35 kN
Colour black
Standard:EN 354, EN 566, EN 795 Class B
Type Length in m Weight in kg Item no.
L-0010-SW-0,4 0.40 0.06 49ASSL10SW04
L-0010-SW-0,6 0.60 0.09 49ASSL10SW06
L-0010-SW-0,8 0.80 0.11 49ASSL10SW08
L-0010-SW-1,0 1.00 0.14 49ASSL10SW10
L-0010-SW-1,2 1.20 0.16 49ASSL10SW12
L-0010-SW-1,5 1.50 0.20 49ASSL10SW15
L-0010-SW-1,8 1.80 0.23 49ASSL10SW18
L-0010-SW-2,0 2.00 0.26 49ASSL10SW20
LOOP 35 kN
Colour yellow
Standard:EN 354, EN 566, EN 795 Class B
Type Lenght in m Weight in kg Item no.
L-0010-GE-0,4 0.40 49ASSL10GE04
L-0010-GE-0,6 0.60 49ASSL10GE06
L-0010-GE-0,8 0.80 49ASSL10GE08
L-0010-GE-1,0 1.00 49ASSL10GE10
L-0010-GE-1,2 1.20 49ASSL10GE12
L-0010-GE-1,5 1.50 49ASSL10GE15
L-0010-GE-1,8 1.80 49ASSL10GE18
L-0010-GE-2,0 2.00 49ASSL10GE20
LOOP SEP 40 KN
The LOOP SEP was specially developed for working at sharp edges. The tensile force of 40 kNand the flexible casing made from special cut-proof fibres make the loop practically indestructi-ble. The fixing is stitched conically so that the loop does not get caught at this critical point. Version with TW karabiner
Standard:EN 354, EN 566, EN 795 Class B, ANSI Z359.1
Type Length in m Weight in kg Item no.
L-0397-1.35 1.35 0.7 49APS397/135
L-0397-0.75 0.75 0.476 49APS397/075
L-0397-2 2.00 0.9 49APS397/200
0.06
0.09
0.11
0.14
0.16
0.20
0.23
0.26
www.carlstahl-fallprotection.com 93
Positining slings, guided type fall arrester
ERGOGRIP CORE S15
• Diameter: 15 mm• Max. number of users: 1• Max. permissible total weight: 100 kg• Suited for sharp edges: yes• Carrying device: VA-rope (coated) 8 mm• Karabiner at device: HMS PASSO TRI• Karabiner at rope: SIDEWINDER TRI• Rope material: V2A/stainless steel
Standard:EN 358:1999
ERGOGRIP SK 12
The ERGOGRIP SK12 is used for work positioning. The kernmantle rope is extremely edge andabrasion-resistant, remains soft when damp and is highly durable. The Ergogrip runner is easy toadjust one-handed. This holding rope can also be used as a guided type fall arrester in accor-dance with EN 353-2. Version with FS 51 / Steel D TRI karabiner
Standard:EN 358, EN 353-2
Type Length in m Rope-ø in mm Item no.
L-0031-1.5 1.5 12 49HMS3115
Weight in kg
0.9
L-0031-2 2.0 12 49HMS31021.0
Type Length in m Rope-ø in mm Item no.
L-0249-2.0 2.0 15 49HMSL24920
Weight in kg
1.57
L-0249-3.0 3.0 15 49HMSL249301.94
L-0249-4.0 4.0 15 49HMSL249402.32
L-0249-5.0 5.0 15 49HMSL249502.70
ERGOGRIP SK 16 - FS 51/90 StThe Ergogrip SK 16 is suitable for use with sharp edges. It is a length-adjustable fall arrest device used for safe and flexible positioning during work. It can be used as a guided type fall arrester or a holding rope. Used as a restraint system, it can prevent or,in the event of a fall, arrest a fall. It is edge and abrasion-resistant and remains soft andflexible even when damp. The special self-adhesive shrinking sleeve made from toughpolyolefin is also abrasion-resistant and hard-wearing. Rope Ø = 16 mm.
Standard:EN 353-2, EN 358
Type Length in m Weight in kg Item no.
L-0280-5 5 1.1 49MASL280/5
L-0280-10 10 1.9 49MASL280/10
L-0280-15 15 2.6 49MASL280/15
L-0280-20 20 3.4 49MASL280/20
L-0280-25 25 4.2 49MASL280/25
94 www.carlstahl-fallprotection.com
Lanyards
Energy absorber BFD SK 12 with STAK TRI and FS 90 aluminium karabiner
The Skylotec energy absorbing lanyards provide high quality at a low price. Available with severaldifferent karabiner options and configurations depending on the requirements of your work site.
Standard:EN 354, EN 355, GB 6095:2009 with L-0097-1.5
Energy absorber BFD SK 12 with STAK karabiner on both sides
Standard:EN 354, EN 355
Type Length in m Weight in kg Item no.
L-0097-1.5 1.5 0.9 49VMSL097/15
L-0097-2.0 2.0 1.0 49VMSL097/20
L-0095-1.5 1.5 0.48 49VMSL095/15
L-0095-2.0 2.0 0.52 49VMSL095/20
SHOCKYARD FLEXThe SHOCKYARD FLEX and SHOCKYARD FLEX V are firstly encased in elastic tubing. This elim-inates any slack rope when the SHOCKYARD is not suspended. The risk of tripping is reducedas the SHOCKYARD remains kink-free and sits close to the body. Integrated rescue loops allowa rescue device to be attached directly, making rescue easier and quicker, without necessitatingadditional equipment such as rope grabs. In the SHOCKYARD, the absorber is distributed alongthe entire length. In the event of a fall, the fall energy is limited to far below 6 kN, evenly ab-sorbed without any peak forces and converted into a plastic deformation of the SHOCKYARDenergy absorber line. The SHOCKYARD has a very short fall-arrest distance of just 0.95 m andabsorbs the fall without the usual tearing noises. This psychological effect appreciably reducesthe shock of the fall. Kobra TRI / FS 90 aluminium karabiner.
EN 354, EN 355
Type Length in m Weight in kg Item no.
L-0425-1.5 1.5 1.1 49VMSL425/15
L-0425-1.8 1.8 1.2 49VMSL425/18
SHOCKYARD FLEX VKobra TRI / 2 x FS 90 aluminium karabiner
EN 354, EN 355
Type Length in m Weight in kg Item no.
L-0390-1.5 1.5 2.0 49VMSL390/15
L-0390-1.8 1.8 2.1 49VMSL390/18
Energy absorber BFD Y SK 12 with STAK TRI and FS 90 aluminium kara-biner
The Skylotec energy absorbing lanyards provide high quality at a low price. Available with sever-al different karabiner options and configurations depending on the requirements of your worksite.
Standard:EN 354, EN 355, GB 6095:2009 with L-0103-1.5
Type Length in m Weight in kg Item no.
L-0103-1.5 1.5 1.4 49VMSL103/15
L-0103-2.0 2.0 1.6 49VMSL103/20
L-0097...
L-0095...
www.carlstahl-fallprotection.com 95
Lanyards, horizontal lifeline systems
Lifeline HorizontalLifeline Horizontal is a temporary and highly flexible fall arrest device that can be quickly installed. Two people can use the device to work securely alonga 20 m stretch. The anchorage points must be designed for a load of 25 kN. The Lifeline Horizontal is ideally complemented by the SEP anchorage loop.
Standard:EN 795 B
Type Length in m Weight in kg Item no.
L-0329 20 2.9 49TPSL0329
SKYSAFE PRO FLEX
New, patented energy absorbing system, which always ensures a maximum impact force of less than 6 kN and a maximum fall arrest distance of 1.75 m for a weight range of 50 kg - 140 kg.Final strength: 22 kN, including in the energy absorber, before and after the dynamic drop. Integrated rescue loop for quicker rescue without additional equipment such as rope clamps etc.
Standard:L-0561-1,8: EN 354, EN 355, AS/NZS 1891.1L-0563-1,8: EN 354, EN 355, AS/NZS 1891.1L-0565-1,8: EN 354, EN 355, AS/NZS 1891.1, ANSI Z359.13, CSA Z259.11L-0568-1,8: EN 354, EN 355, AS/NZS 1891.1
Type Length in m Weight in kg Item no.
L-0561-1.8 1.8 (2-leg) 2.2 49VMSL561/18
L-0563-1.8 1.8 (2-leg) 2.8 49VMSL563/18
L-0565-1.8 1.8 (1-leg) 1.4 49VMSL565/18
L-0568-1.8 1.8 (1-leg) 1.3 49VMSL568/18
L-0563-1.8 L-0565-1.8 L-0568-1.8L-0561-1.8
Type Weight in kg
PVC-Carrying bag, black 0.60
Size (h x Ø)
in cm
60 x 30
Capacity in litres
45
Item no.
49ZBPS01
Transportation bag 0.96WxLxH (30x45x35) 45 450T0000
PVC Carrying bag Transportation bag
96 www.carlstahl-fallprotection.com
Horizontal lifeline systems, karabiners
Quick SafeThe horizontal safety system Quick Safe is a temporary fall arrest device for temporary use in accordance with standard EN 795, Class C. It acts as an anchorage point that must be used inconjunction with lanyards, which are in turn fitted with energy absorbers (EN 354/355) or guidedtype fall arresters (EN 353-2). The horizontal safety system is attached between two anchorages.These must comply with the requirements of standard EN 795 and guarantee a minimumstrength of 10 kN. If the gap between the anchorages exceeds 6 m, the karabiners attached tothe guide rope must be attached to additional anchorages as intermediate fixtures. These mustalso have a strength of 10 kN. The maximum field size (i.e. distance between two anchorages)must not exceed 6 m.
Standard:EN 795 C
Type Length in m Weight in kg Item no.
L-0037-13 13 3.6 49TPSL037/13
L-0037-19 19 4.8 49TPSL037/19
L-0037-25 25 6.0 49TPSL037/25
L-0037-31 31 7.0 49TPSL037/31
Type Material Max.
opening
in mm
Weight
in g
Item no.
H-037 Galv. steel 22 18 175 49KHSH037
Locking method
Screw lock
Standard
EN 362; GOST
Width x Height
in mm
108 x 58.59 7
H-129 Galv. steel 41 20 255 49KHSH129Twistlock EN 362, ANSI Z359.1-07,
CSA Z259.12-01
110 x 6716 -
H-137-SC-GR Aluminium 22 30 82 49KHSH137SScrew lock EN 362, EN 12275,
UIAA 121
112 x 7810 7
H-137-TRI Aluminium 22 30 90 49KHSH137TRTrilock EN 362, EN 12275,
UIAA 121
112 x 7810 7
H-137-TW Aluminium 22 30 89 49KHSH137TWTwistlock EN 362, EN 12275,
UIAA 121
112 x 7810 7
H-035-SW Aluminium 22 18 76 49KHSH035SWScrew lock EN 362108 x 599 7
H-036 Aluminium 22 18 82 49KHSH036Twistlock EN 362108 x 587 -
H-038 Galv. steel 22 18 192 49KHSH038Twistlock EN 362110 x 607 -
H-051 Galv. steel 30 21 190 49KHSH051Trilock EN 362111 x 6215 10
H-69 Aluminium 24 21 82 49KHSH069Trilock EN 362110 x 607 -
H-088 Aluminium 30 24 122 49KHSH088Trilock EN 362125 x 907 -
H-102 Aluminium 30 24 120 49KHSH102Twistlock EN 362125 x 907 -
H-115 Aluminium 30 24 120 49KHSH115Screw lock EN 362125 x 907 -
Minimum breaking load in kN
OVALSTEEL S STEEL D TW
H-037 H-129
PassO-SC PassO-TRI PassO-TW
H-137-TWH-137-SC-GR H-137-TRI
OVALOY CS BLACK OVALOY TW
H-035-SW H-036
OVALSTEEL SC TW OVALSTEEL TRI OVALOY TRI
H-069H-038 H-051
VIPER TRI VIPER TW
H-088 H-102
VIPER SC
H-115
www.carlstahl-fallprotection.com 97
Rescue devices and ropes
MILAN 2.0 Hub The MILAN 2.0 HUB is additionally equipped with a hub function. This enables accident victimsto be lifted across a short distance in order to release their lanyards, after which they can besafely lowered. The new housing design improves handling during accompanied rescues. TheSuper Static 9.0 static rope fulfils this requirement despite its diameter of only 9 mm.The packing size of the MILAN 2.0 HUB is therefore small compared to devices with 10.5 mmropes. This is a great advantage, in particular at great heights.
Standard:EN 341 Kl. A, EN 1496, ANSI Z359.4
No. of people
2
MILAN 2.0• Even more powerful.• New design with improved appearance and handling.• Offers even more usage options for different rescue techniques.
The centrifugally-controlled brake maintains a constant speed during the entire descent processand permits a quick and safe rescue. The brake shaft runs on ball-bearings on both sides. Thehousing is constructed of milled aircraft-grade aluminium, which makes the MILAN the most ro-bust device in the world.This is what allows rescue techniques such as rescue support in lattice mast structures. A sealshows whether the MILAN 2.0 has been opened without authorization. The MILAN 2.0 is certifiedto international standards and special regulations for use on vessels and offshore structures, forexample by Germanischer Lloyd.
Standard:EN 341 Kl. A, ANSI Z359.4
Type Weight in kg Item no.
A-027 1.6 49RTSMA027
Customer service for MILAN devices:
Carl Stahl is a manufacturer-certified specialist for:
- Level 1: Conducting the expert inspection
- Level 2: Conducting maintenance and repairs
For enquiries, please contact the applicable Carl Stahl site, see page 132
Super Static 9.0The static rope Super Static is designed for heavy loads when working at heights as well as forrescue and winch operations. Expansion and sheath slip are low. The abrasion resistance of thesheath, on the other hand, is so high that it is even suitable for climbing clamps. At the sametime, the Super Static is also flexible enough to be used for rescue operations with long descentdistances.
Type
L-0520-XXX
Jacket portion
in %
38%
Expansion in use in %
5%
Maximum tensile strength
(EN1891) in kN
24
Rope-ø
in mm
9
Item no.
49RTL0520
Type Weight in kg Item no.
A-028 2.0 49RTSMA028
5 m rope steps possible (up to 300 m)
Device without rope
Device without rope
98 www.carlstahl-fallprotection.com
Rescue devices/Accessories
MILAN 2.0 PowerThe MILAN 2.0 POWER is a special version of the MILAN 2.0 HUB, which can alsobe electrically driven.
• Mains-independent thanks to Li-ion rechargeable batteries• Max. descent weight 250 kg• Distance of up to 60 m at 100 kg with 1 battery charge• Batteries can be easily replaced with hanging rope• Hand wheel guarantees emergency operation in the event of device failure or in-sufficiently charged batteries.
Note: the MILAN 2.0 POWER must only be used with the devices supplied by SKYLOTEC!
Standard:EN 341 Kl. A, EN 1496, ANSI Z359.4
Type Weight in kg Item no.
A-029 2.25
No. of people
2 49RTSMA029
Type Weight in kg Item no.
A-029-G 1.6 49RTSA029G
A-029-L 1.0 49RTSA029L
A-029-A 0.8 49RTSA029A
A-029-G A-029-L A-029-A
BATTERY CHARGER
For charging A-029-G
BATTERY-POWERED DEVICE SPARE BATTERY
Included:• Battery-powered device as a drive for the MILAN 2.0 POWER• 2 x Li-ion rechargeable batteries• Charger• Plastic case
www.carlstahl-fallprotection.com 99
SEAL PAC All rescue devices must be inspected on an annual basis – including unused devices stored foremergencies. The SEAL PAC makes this regular inspection easier. The MILAN is stored in asealed metal box. An authorised inspector opens the sealed box once a year and checks themoisture indicator on the MILAN packaging and the device’s fully functional condition. If every-thing is as it should be, the inspector marks the month and year of the next inspection, signs,and seals the metal box with a new seal. The key advantage of the SEAL PAC is the ability tosave costs and time with controlled safety. The rescue device can be stored in the Seal Pac for10 years.
PERISROPEdge guard with 3 cable guide rings, 2-metre keeper cord and oval, steel S22 KN karabiner
Type For rope lengths in m Material Item no.
SET-SEAL PAC 80 80 Aluminium
Weight in kg
7.11 49RTSEAL80
SET-SEAL PAC 120 120 Aluminium 7.22 49RTSEAL120
SET-SEAL PAC 150 150 Aluminium 9.22 49RTSEAL150
Type Weight in kg Item no.
H-056 0.863
Length in m
2.0 49SSH056
Accessories/Edge protection
100 www.carlstahl-fallprotection.com
Fall arrest harnesses
Miller H-Design™ fall arrest harnesses stand for a new generation of fall protection equipments for the construction industry andvarious industry sectors, who garanty more comfort, mobility and safety for the user.
COMFORT AND MOBILITY• The elastic webbing straps of the Duraflex-version at the shoulders adapt to the body shape of the user and allow a higher mobility by a better
freedom of movement.
EASY AND FAST ADAPTION AND CONNECTION• Easy accessible attachment points: with curved positioning D-ring on the back and long webbing loops or one D-ring on the front for an easy
connection.• Adjustable sternum strap for a perfect width adjustment: allows the movement of the sternum strap along the shoulder web (Models with loops
and 1-point fall arrest harnesses) and ensures a better fitting and more comfort for every body shape.
MORE SAFETY AND EASIER TRACEABILITY• Unique, patented D-ring on the chest for a adjustment of the sternum strap, which ensures a automatic centring in case of a fall to avoid, that the
user tips over to the side.• Well visible green design elements and seams as well as fall indicators at the front and back lighten the check before the start of work.• Better traceability: protected pocket for 5 labels behind attachment for tools and accessories, which lightens the yearly checks and following
inspections and ensure a better traceability. The labels now include additional informations about the user (name) and the inspections (10 yearoverview, date of next inspection).
• Better durability: water- and stain-resistant webbings.
www.carlstahl-fallprotection.com 101
ONREQUEST
SIZE 1 SIZE 2 SIZE 3
ONREQUEST
Fall arrest harnesses
EXCLUSIVE AND INNOVATIVE FALL ARREST HARNESS IN H-DESIGN
Elastic webbingsfor more mobility
Adjustable sternum strapfor a perfect fit
Fall indicators at the front
webbing loopsfor a easyinspection
Well placedbuckles
for a preciseadjustment
Water resistant webbings,which ensure a longevityto the product
CERTIFIED up to 140 kg
Curved positioningD-ring on the back
for an easy connection
Fall indicatorson the back platefor an easyinspection
Protectedlabel pocketfor a bettertraceability
Patented chest-D-ring:for adjustment of thesternum strap; D-ring centersitself in case of a fall
Long loops at the frontfor an easy connection
Large free space at both sides of the fall arrest harness (no cross design)easy connection
Horizontalleg loopsfor more comfortduring work
SELECTION CHART FOR THE SIZE
140
130
120
110
100
90
80
70
60
50
40
150 155 160 165 170 175 180 185 190 195 200
BODY WEIGHT in kg
BODY HEIGHT in cm
102 www.carlstahl-fallprotection.com
Fall arrest harnesses
Miller® H-DesignTM 2-point fall arrest harnessThe lightweight and robust 2-point universal harness includes a positioning D-ring on the backand 2 webbing loops on the chestThe webbings are not elastic
Areas of application: Fall protection areas during assembling, suppliers and construction industry
Standard:EN 361
Miller® H-DesignTM 1-point fall arrest harnessThe lightweight and robust 1-point universal harness includes a positioning D-ring on the backfor a easy connectionThe webbings are not elastic
Areas of application: Fall protection areas during assembling, suppliers and construction industry
Standard:EN 361
Type Size Weight in kg Item no.
1032831 1 0.94 49AGHD1032831
Description
1-point harness, manual lock
1032832 2 0.96 49AGHD10328321-point harness, manual lock
1032833 3 0.98 49AGHD10328331-point harness, manual lock
1032835 1 0.98 49AGHD10328351-point harness, automatic lock
1032836 2 1.00 49AGHD10328361-point harness, automatic lock
1032837 3 1.02 49AGHD10328371-point harness, automatic lock
Type Size Weight in kg Item no.
1032839 1 1.00 49AGHD1032839
Description
2-point harness, manual lock
1032840 2 1.02 49AGHD10328402-point harness, manual lock
1032841 3 1.04 49AGHD10328412-point harness, manual lock
1032847 1 1.04 49AGHD10328472-point harness, automatic lock
1032848 2 1.06 49AGHD10328482-point harness, automatic lock
1032849 3 1.08 49AGHD10328492-point harness, automatic lock
Type Size Weight in kg Item no.
1032843 1 1.11 49AGHD1032843
Description
2-point harness, manual lock
1032844 2 1.13 49AGHD10328442-point harness, manual lock
1032845 3 1.14 49AGHD10328452-point harness, manual lock
1032851 1 1.15 49AGHD10328512-point harness, automatic lock
1032852 2 1.17 49AGHD10328522-point harness, automatic lock
1032853 3 1.19 49AGHD10328532-point harness, automatic lock
Miller® H-DesignTM 2-point fall arrest harnessThe lightweight and robust 2-point universal harness includes a positioning D-ring on the backand 1 D-ring on the chestThe webbings are not elastic
Areas of application: Fall protection areas during assembling, suppliers and construction industry
Standard:EN 361
www.carlstahl-fallprotection.com 103
1032855 1 0.981-point harness, manual lock 49AGHD1032855
Fall arrest harnesses
Miller® H-DesignTM 2-point fall arrest harnessThe lightweight and robust 2-point universal harness includes a positioning D-ring on the backand 2 webbing loops on the chestThe webbings are elastic
Areas of application: Fall protection areas during assembling, suppliers and construction industry
Standard:EN 361
Miller® H-DesignTM 1-point fall arrest harnessThe lightweight and robust 1-point universal harness includes a positioning D-ring on the backfor a easy connectionThe webbings are elastic
Areas of application: Fall protection areas during assembling, suppliers and construction industry
Standard:EN 361
Type Size Weight in kg Item no.
1032863 1 1.04 49AGHD1032863
Description
2-point harness, manual lock
1032864 2 1.06 49AGHD10328642-point harness, manual lock
1032865 3 1.07 49AGHD10328652-point harness, manual lock
1032871 1 1.08 49AGHD10328712-point harness, automatic lock
1032872 2 1.10 49AGHD10328722-point harness, automatic lock
1032873 3 1.12 49AGHD10328732-point harness, automatic lock
Type Size Weight in kg Item no.
1032867 1 1.14 49AGHD1032867
Description
2-point harness, manual lock
1032868 2 1.16 49AGHD10328682-point harness, manual lock
1032869 3 1.18 49AGHD10328692-point harness, manual lock
1032875 1 1.18 49AGHD10328752-point harness, automatic lock
1032876 2 1.20 49AGHD10328762-point harness, automatic lock
1032877 3 1.22 49AGHD10328772-point harness, automatic lock
Miller® H-DesignTM 2-point fall arrest harnessThe lightweight and robust 2-point universal harness includes a positioning D-ring on the backand 1 D-ring on the chestThe webbings are elastic
Areas of application: Fall protection areas during assembling, suppliers and construction industry
Standard:EN 361
Type Size Weight in kg Item no.Description
1032856 2 1.00 49AGHD10328561-point harness, manual lock
1032857 3 1.02 49AGHD10328571-point harness, manual lock
1032859 1 1.02 49AGHD10328591-point harness, automatic lock
1032860 2 1.04 49AGHD10328601-point harness, automatic lock
1032861 3 1.06 49AGHD10328611-point harness, automatic lock
104 www.carlstahl-fallprotection.com
Duraflex® MA 04As a 2-point fall arrest harness, the ideal harness shape for all work without positioning tasks.With front and back fall arrest eyelets and fully adjustable harness loops.The DuraFlex® elastomer webbing offers outstanding wear comfort and a long service life. Thematerial is water, oil, dirt and grease repellent.Soft anchor eyelets at the front made from webbing.
Areas of application:Fall protection areas during assembling, general industry and construction industry
Standard:EN 361
Type Size Weight in kg Item no.
1002850 S 0.87 49AGDUMA04/S
1002849
Description
Manual locks on the chest and legs
Manual locks on the chest and legs M/L 0.87 49AGDUMA04/L
Fall arrest and positioning harnesses
www.carlstahl-fallprotection.com 105
Fall arrest and positioning harnesses
R2 RevolutionTM comfort fall arrest harness Duraflex®
As a two-point fall arrest harness, the professional R2 offers full freedom of movement thanks tothe Duraflex® webbing and the ErgoArmorTM comfort back padding. The harness has PivotLinkTM
connections with a pivot point at the hips and harness end clips for attaching unused lengths ofwebbing.
Areas of application: Fall protection areas during assembling, general industry and construction industry
Standard:EN 361
Type Size Weight in kg Item no.
1014236 S/M 1.5 49AGDUR2/M
1014237
Description
Automatic locks
Automatic locks L/XL 1.7 49AGDUR2/XL
1014238 Automatic locks XXL* 1.8 49AGDUR2/XXL
*Size XXL was delivered on an order-related basis
AGU 90 S Duraflex®, elasticated multi-point harness with integrated waistbeltThe lightweight and robust 3/4-point universal harness has not only a dorsal fall arrest eyelet butalso 2 attachment points on the waistbelt and one climbing protection eyelet.
Areas of application: Fall protection areas during assembling, general industry and construction industryIf an additonal positioning is necessary.
Standard:EN 361and EN 358
Type Size Weight in kg Item no.
ME 13344 M/L 1.3 49AGU90S/L
1015400
Description
Manual lock
Manual lock XL 1.4 49AGU90S/XL
R6 RevolutionTM premium fall arrest harness Duraflex®
The five-point fall arrest harness adapts to the wearer’s movements thanks to the elasticatedmaterial, therefore supporting fatigue-free working.
Duraflex® webbing and ErgoArmorTM comfort back padding ensure greater mobility during as-cents and descents. The harness has PivotLinkTM connections with a pivot point at the hips. Inaddition to fall arrest eyelets on the chest and back, it also has two attachment points on thewaistbelt and one climbing protection eyelet.Quick-adjust CAM buckles on the shoulder straps ensure a perfect fit and quick adjustment.
Areas of application: Fall protection areas during assembling, general industry and construction industries as well asthe climbing protection field in general
Standard:EN 361 and EN 358
Type Size Weight in kg Item no.
1014257 S/M 1.9 49AGDUR6/M
1014258
Description
Automatic locks
Automatic locks L/XL 2.0 49AGDUR6/XL
1014259 Automatic locks XXL* 2.1 49AGDUR6/XXL
*Size XXL was delivered on an order-related basis
106 www.carlstahl-fallprotection.com
Positioning sling, connectors and lanyards
Type Length in m Weight in kg Item no.
1032097 2.0 0.82 49VMHZ02
1032128
Description
With automatic karabiner
Spare rope 12 mm Ø 2.0 0.32 49VMHZ02A
HandZup® positioning and restraint ropeAdvantages• Ergonomic, flexible, replaceable and highly durable lanyard
Features• Two aluminium jaws, ABS grip, aluminium housing• Twisted rope made from 100% polyamide with 12 mm diameter• With rope shortener and karabiner
Area of use: Restraint and positioning work
Standard:EN 358
TITANTM positioning slingThe positioning sling offers a safe anchorage point for fall protection equipment and lanyards.
Standard:EN 795 B, EN 566
Type Length in m Weight in kg Item no.
1017916 2.0 1.26 49VMED02
Description
With aluminium karabiner and scaffold hook (63 mm)
Edge-tested lanyard and Manyard® edgePreventing damage to fall arrest equipment on edges is a technical challenge, for which Miller of-fers several solutions.To combat equipment wear during work at heights in the vicinity of edges that present a fall haz-ard, the use of edge-tested lanyards is recommended. These products have been designed tonot tear or become damaged in the event of a fall over an edge, as well as to absorb impactforces.
Advantages• Mechanical properties ensure good cut and shear resistance• Energy absorbers reduce the impact force to under 6 kN• Flexible stretch fabric prevents tripping and entanglement
Features• The black stripes indicate that the product is edge tested• Integrated energy absorber
Area of use: Fall arrest areas during installation work as well as for the utility and construction industries
Standard:EN 355
Type Item no.Weight
in kg
1008361 49APTI080.16
Length
in m
0.80
Breaking load
in kN
22
1008362 49APTI100.181.00 22
1008364 49APTI150.251.50 22
Material
20 mm polyamide webbing
1008360 49APTI060.1050.60 22 20 mm polyamide webbing
20 mm polyamide webbing
1008363 49APTI120.161.20 22 20 mm polyamide webbing
20 mm polyamide webbing
www.carlstahl-fallprotection.com 107
Lanyards
Type Length in m Weight in kg Item no.
1016847 2.0 1.07 49VMD1201
Description
Automatic karabiner and scaffold hook (65 mm)
1016849 2.0 1.09 49VMD1202Screw karabiner and scaffold hook (65 mm)
1016848 2.0 0.81 49VMD1203With 2 screw karabiner
1016850 1.5 1.48 49VMD1204With screw karabiner and 2 scaffold hooks (65 mm)
D12 edge-tested energy absorbing lanyardPreventing damage to fall arrest equipment on edges is a technical challenge, for which Miller of-fers several solutions.To combat equipment wear during work at heights in the vicinity of edges that present a fall haz-ard, the use of edge-tested lanyards is recommended. These products have been designed tonot tear or become damaged in the event of a fall over an edge, as well as to absorb impactforces.
Advantages• Mechanical properties ensure good cut and shear resistance• Energy absorbers reduce the impact force to under 6 kNFeatures• Even withstand falls over very sharp edgesArea of use: Fall arrest areas during installation work as well as for the utility and construction industries
Standard:EN 355
TurboLiteTM fall limiter, inspection freeAn alternative to shock-absorbing lanyardsSuitable for fall factor 2
Advantages• Ideal for all situations with low clearance• The necessary clearance is low (1.80 m) compared to that required for energy absorbing lan-
yards (fall factor 0)• Suitable for use with fall factor 2 (anchorage point below the rear D-ring but not lower than the
stand area) and can be attached on both sides• Max. user weight of 100 kg with a fall factor of 2 (140 kg with a fall factor of 0 or 1)• Suitable for horizontal and vertical use, no annual inspection requiredFeatures• The fall indicator in the webbing informs users of the functional status• All models have a 2 m action radius• Special webbing for greater wear resistance, integrated swivel suspension prevents twistingArea of use: Fall arrest areas during installation work as well as for the utility and construction industries
Standard:EN 360
1016847
1016849
1016848
1016850
Type Weight in kg Item no.
1018015 0.87
Description
With 2 Twistlock karabiners 49HSGTL01
Housing
Nylon housing
Length in m
2.0
1018014 1.32With 1 Twistlock and 1 scaffold hook 49HSGTL02Nylon housing 2.0
PVC Carrying bag Transportation bag
Type Weight in kg
PVC-Carrying bag, black 0.60
Size (h x Ø)
in cm
60 x 30
Capacity in litres
45
Item no.
49ZBPS01
Transportation bag 0.96WxLxH (30x45x35) 45 450T0000
108 www.carlstahl-fallprotection.com
Retractable type fall arresters
FALCONTM retractable type fall arrester, inspection free• Nylon housing with lifelong guarantee• Stops falls after only a few centimetres and enables rapid, safe rescues• Clearly visible fall indicator on the lower automatic karabiner• Interior components made from stainless steel and aluminium• No annual manufacturer inspection required.
According to the CE standard, an inspection should be carried out by an expert, during whichthe Miller repair manual is considered
Areas of application: Fall arrest areas during installation work as well as for the utility and construction industries
Standard:EN 360
Anchor sling for horizontal use Suitable screw karabiner
Type Weight in kg Item no.
1011728 4,0
Lanyard
6.20 m galvanised wire rope 49HSGFC06
Automatic karabiner with
fall indicator
Steel
Dimensions in mm
255 x 213 x 101
1011742 5,010 m galvanised wire rope 49HSGFC10Steel 255 x 213 x 101
1011743 5,010 m stainless steel wire rope 49HSGFCE10Steel 255 x 213 x 101
1011746 6,715 m galvanised wire rope 49HSGFC15Steel 342 x 246 x 101
1011747 6,715 m stainless steel wire rope 49HSGFCE15Steel 342 x 246 x 101
1011750 7,620 m galvanised wire rope 49HSGFC20Steel 342 x 246 x 101
1011751 7,620 m stainless steel wire rope 49HSGFCE20Steel 342 x 246 x 101
1011729 4,06.20 m stainless steel wire rope 49HSGFCE06Steel 255 x 213 x 101
Type
1002897
Description
Anchor sling for horizontal use MJ51
Material
Coated steel wire rope
Dimension
Length: 1.0 m
1018960 Screw karabiner for the anchor sling ML00 Steel/Screw karabiner
Breaking load in kN
15
25 Opening width: 17 mm
Weight
0.28
0.165
Item no.
49APMJ51
49KHML00
Screw karabiner
Swivel fromstainless steel
Inner componentsstainless steel andaluminium
High shock-resistantNylon housing
Rope outputwith ball sealing
Fall indicator
6,20 u. 10 m-Modell
Ergonomic shaped handle(15 and 20 m-Model)
After release ofthe fall indicator
From galvanised steel with plastic covering, Ø 6.3 mm. • Opening: Ø 300 mm• Standard: EN 795B Standard: EN 362
www.carlstahl-fallprotection.com 109
Load arresters
Type Weight in kg Item no.
1006603 11.30
Description
Load arrester 6-2000L, steel housing,
fall indicator at the device, galvanised wire rope
Max. Load in kg
500 49LG1006603
Rope length in m
10
1006609 4.64Load arrester, steel housing,
fall indicator (plastic thimble at galvanised wire rope)
250 49LG10066095
ME13510 11.20Load arrester, steel housing,
fall indicator at the device, stainless steel wire rope
500 49LGME1351010
ME13732 18.40Load arrester, steel housing,
fall indicator at the device, galvanised wire rope
500 49LGME1373215
ME21505 18.40Load arrester, steel housing,
fall indicator at the device, galvanised wire rope
240 49LGME2150530
1016115 5.28Falcon load arrester, nylon housing,
fall indicator, galvanised wire rope
200 49LG101611510
1015091 4.64Load arrester, steel housing,
fall indicator (plastic thimble at galvanised wire rope)
250 49LG10150918
Load arresters are not products for personal protective equipment!
Load arresters with galvanised steel wire rope
Fall indicator
Swivel
Load arresters are for securing of loads in case of a break of the load suspension device (e.g.Crane rope, chain). They are often used at production- and assembly work places of compo-nents.
The application of this products was primarily regulated in the EU by:Manufacturer’s test/type examination from a EU notified testing lab.- DIN EN 360, retractable type fall arresters (test basis at the type examination)- DIN 3069 selection of suitable rope construction
Why application ?- European guideline of minimum rules for safety and health protection at the use of work
equipment by workers at work (89/391/EWG and modification guideline 95/63/EG).- DGUV-regulation 1 “Policies of prevention”- DGUV-standard 100-501 “Operating of work equipment”
Type 1006603 Type 1016115
Delivery of the devices with 2 karabiner acc. to EN 362.
110 www.carlstahl-fallprotection.com
Retractable type fall arresters
Type Karabiner type
IKV14 Screw gate
Breaking load/Standard
25-kN-anchor,
EN 362
Description
17 mm opening width,
galvanised steel
Weight in kg
0.28
Item no.
49KHIKV14
IKAR flexible in accordance with DIN EN 360:2002Housing material: plastic or aluminiumLanyard: webbing or galvanised steel rope
Robust, low-maintenance retractable type fall arrester with webbing or galvanised steel cable, lowweight thanks to ultra-light plastic housing, also with aluminium housing and swivel suspension.
The swivel suspension prevents the webbing or cable from twisting.
Type Weight in kg Item no.
41-HWB 2 (Sweety) 0.8
Lanyard
2.00 m web* 49HSGHWB02
41-HWPB 3.5 1.23.50 m web* 49HSGHWPB35
41-HWPB 7 1.87.00 m web* 49HSGHWPB07
41-HWPB 9 2.39.00 m web* 49HSGHWPB09
41-HWPB 12 3.412.00 m web* 49HSGHWPB12
41-HWPS 3 1.93.00 m rope 49HSGHWPS03
41-HWPS 6 2.56.00 m rope 49HSGHWPS06
41-HWPS 12 4.912.00 m rope 49HSGHWPS12
41-HWPS 18 6.318.00 m rope
Housing
Aluminium
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Plastic
Dimensions in mm
240 x 84 x 61
326 x 104 x 78
300 x 165 x 80
335 x 168 x 88
370 x 195 x 95
390 x 104 x 78
420 x 145 x 80
500 x 195 x 95
540 x 220 x 97 49HSGHWPS18
41-ACB 1.8 0.961.80 m web Aluminium 240 x 84 x 61 49HSGACB18
*IKAR retractable type fall arresters aretested over the edge in a fall test.(r ≥ 0.5)
Explanation of device names:H = retractable type fall arrester, W = swivel suspension, S = galvanised steel cable, B = webbing, P = plastic housing, number = length of the retrac-table lanyard
Example: HWB 2.5 means: retractable type fall arrester with swivel suspension and webbing, webbing length of 2.5 metres
IKAR HRA in accordance with DIN EN 360:2002 and DIN EN 1496:2007Housing material: aluminium or plasticLanyard: galvanised steel rope
IKAR retractable type fall arresters with rescue lifting device (type HRA) are fitted with a winchunit. Following a fall, this winch unit can be easily engaged by a second person, for example inthe event of unconsciousness due to gases in shafts and sewerage systems. The accident victimcan therefore be saved quickly and safely. The rescue lifting device has an integrated energy-absorbing function, as required by the new European harmonised standard EN 1496. Theentire unit is constructed from stainless steel, aluminium or impact-resistant plastic. The differentcable lengths make the right device available for any use. (Special cable lengths and Dyneemaor stainless steel cables are available on request)
Explanation of device names:H = retractable type fall arrester, R = rescue lifting device, A = drain function, p = plastic housing, number = length of the retractable lanyard
Example: HRA 15 means: retractable type fall arrester with a rescue lifting device, rope length 15 metres
Type Weight in kg Item no.
41-HRA 12 7.0
Lanyard
12.00 m rope 49HSGHRA12
41-HRA 18p 10.318.00 m rope 49HSGHRA18P
41-HRA 33 21.033.00 m rope 49HSGHRA33
Housing
Aluminium
Plastic
Aluminium
Dimensions in mm
450 x 195 x 180
41-HRA 18 11.518.00 m rope 49HSGHRA18Aluminium 570 x 240 x 200
620 x 231 x 152
640 x 315 x 230
Karabiner IKV14
41-ACB 1.8IKAR ACB 1.8The retractable type fall arrester has been designed for the safety of people onworking platforms. Only IKV 13 and IKV 30 connectors may be used.
(2 x r ≥ 0,5)
www.carlstahl-fallprotection.com 111
Retractable type fall arresters and rescue kit
Rescue kitThe rescue kit has been specially designed for users who use a belt system in conjunction with a re-tractable type fall arrester or an energy-absorbing element and who end up in a hanging situation after afall from which they are unable to free themselves using their own strength alone and must therefore turnto external means of rescue.
The complete rescue kit comprises:• Descender ABS 3WH with rescue lifting device for optional lifting or controlled descending• Anchorage loop with a length of 1 m• Steel karabiner IKV13 as a connector• Telescopic rod with an attached karabiner bracket (further automated open position retention)
at the head end. Extendible to up to 3.60 m• Maximum reachable working distance = approx. 5 m• Optionally available with 20 m or 40 m kernmantle rope Ø 10 mm• Practical bag• Detailed user instructions
Type Rope length in m Item no.
41-RSET/20 20 49RTRSET20
41-RSET/40 40
Weight in kg
6.2
7.5 49RTRSET40
IKAR flexible in accordance with DIN EN 360:2002HWDB 2 karabiner IKV 20
Housing material: AluminiumLanyard: Webbing with fall indicator
Robust, low-maintenance dual retractable type fall arrester for securing one person against a fall. Specially developed to enable secure work positioning changes through two-way anchorage and permanent prevention of falls.Webbing with fall indicators and 2 x 2 extension lengths.Energy-absorbing function in the aluminium housing. Swivel karabiner with a 24 mm opening. Swivel suspension on the aluminium housing.
*IKAR retractable type fall arresters HWDB2 are tested over the edge in a fall test.(r ≥ 0.5)
HWDB 2R karabiner IKV 25
Housing material: AluminiumLanyard: Webbing with fall indicator
Robust, low-maintenance dual retractable type fall arrester for securing one person against a fall. Specially developed to enable secure work positioning changes through two-way anchorage and permanent prevention of falls.Webbing with fall indicators and 2 x 2 extension lengths.Energy-absorbing function in the aluminium housing. Swivel karabiner with a 60 mm opening. Swivel suspension on the aluminium housing.
Type Weight in kg Item no.
41-HWDB 2 1.9
Lanyard
2 x 2 m web 49HSGHWDB2
41-HWDB 2R 2.82 x 2 m web
Karabiner
180
280 49HSGHWDB2R
Housing
Aluminium
Aluminium
Dimensions in mm
250 x 165 x 60
250 x 165 x 60
Explanation of device names:H = retractable type fall arrester, W = swivel suspension, B = webbing, number = length of the retractable lanyard
Example: HWB 2.5 means: retractable type fall arrester with swivel suspension and webbing, webbing length of 2.5 metres.
Type Karabiner type
IKV13 Screw gate
Breaking load/Standard
25-kN-anchor,
EN 362
Description
17 mm opening width,
galvanised steel
Weight in kg
0.16
Item no.
49KHIKV13
IKV30 Trilock-closure 25-kN-anchor,
EN 362
17 mm opening width,
galvanised steel
0.195 49KHIKV30
112 www.carlstahl-fallprotection.com
The right harness for every work area
Harnesses form a direct interface between users and safety chains. Tofulfil all requirements relating to working at heights, different harnesstypes are available:• Fall arrest harnesses and work positioning belts for work positioning:
These are highly versatile, suitable for most situations involving workat heights and offer optimum comfort.
• Work positioning belts for work positioning: These are designed forwork where there is no risk of falling.
• Fall arrest harnesses: These must be connected to a fall arrest system to protect the userin the event of a fall.
All Petzl harnesses have an adjustable shoulder strap, waist belt andleg loops. All adjustment buckles use the self-locking DoubleBack sys-tem with which the webbing does not have to be thread back throughthe buckle to close it. Instead, the buckles can be adjusted by onehand. Some harnesses have automatic FAST buckles on the leg loops.Once they have been adjusted, these buckles can be closed quicklyand easily. The harness can be put on without having to unthread thewebbing.
Foam-padded shoulder straps
New closures on AVAO harnesses
Five equipment loops distributedbetween the side and rear. CARI-TOOL tool holder and TOOLBAGcan also be attached.
• Upper and lower straps are different colours to help users put on the harness correctly• A sternal and a dorsal fall arrest eyelet• Two sternal attachment points and pre-formed vest to make the harness easier to put on• Shoulder straps equipped with self-locking DoubleBack buckles• Leg loops equipped with FAST automatic buckles for quick and easy opening and closing without the need for
readjustment (the user’s feet remain on the ground when donning the harness)• Two equipment loops with protective sheath• Work positioning on the lateral attachment points is possible with the PAD FAST work positioning belt• Upright descent with the help of the LIFT spreader. The NEWTON FAST JAK harness is also available in black
without the dorsal attachment points.
EN 361
NEWTONBasic modular fall arrest harness
• Upper and lower straps are different colours to help users put on the harness correctly• A sternal and a dorsal attachment point for connecting a fall arrest system• Shoulder straps equipped with self-locking DoubleBack buckles• Two equipment loops with protective sheath• Work positioning on the lateral attachment points is possible with the PAD FAST work positioning belt (optional)• Upright descent with the help of the LIFT spreader (optional)
EN 361
LIFTSpreader for NEWTON harness allows upright descent(for confined spaces)
• Triangular karabiners for easier insertion into harness slots• Rigid structure keeps the spreader’s shape around the
user’s head• Certification: CE
Fall arrest harnesses
DoubleBack buckle FAST buckle
Type Size Dimensions in cm Weight
in kg
Item no.
A B
C73JF00 0 68 - 95 45 - 60 1.04 49AGNEF0
C73JF01 1 75 - 104 53 - 66
Body height
165 - 180
173 - 187 1.15 49AGNEF1
C73JF02 2 97 - 125 55 - 75 180 - 194 1.22 49AGNEF2
Type Size Dimensions in cm Weight
in kg
Item no.
A B
C730001 1 75 - 104 53 - 66 0.78 49AGNE01
C730002 2 97 - 125 55 - 75
Body height
173 - 187
180 - 195 0.81 49AGNE02
Weight
in kg
Item no.
0.52 49RTL54
Type
L54
M37 SL M37 TLor
For closure of the NEWTON FAST JAKin the chest area a karabiner M37 SL or M37 TL is used (page 124/125).
NEWTON FAST JAKBasic modular fall arrest harness with JAK vest
www.carlstahl-fallprotection.com 113
AVAO® BOD CROLL FASTComfortable harness for areas with restricted access
• Integrated CROLL (ventral) rope clamp for ascending ropes• Semi-rigid waistbelt and leg loops for optimum support• Waistbelt and shoulder straps equipped with self-locking DoubleBack buckles• The ventral attachment point distributes the load between the waistbelt and the leg
loops when suspended and during descents• Two lateral attachment points transfer the load to the waistbelt during work positioning• One sternal and one dorsal attachment point for connecting a fall arrest system• Five pre-shaped equipment loops with a protective sheath
EN 361, EN 358, EN 813, EN 12841 Type B
AVAO® BOD Comfortable fall arrest and work positioning harness
• Semi-rigid waistbelt and leg loops for optimum support• Waistbelt and shoulder straps equipped with self-locking DoubleBack buckles• The ventral attachment point distributes the load between the waistbelt and the leg loops
when suspended and during descents• Two lateral attachment points transfer the load to the waistbelt during work positioning• One sternal and one dorsal attachment point for connecting a fall arrest system• Five pre-shaped equipment loops with a protective sheath
CE EN 361, EN 358, EN 813
AVAO® SIT Work positioning seat harness
• Wide, semi-rigid waistbelt and leg loops for optimum support• Available with self-locking DoubleBack buckles or FAST automatic buckles on the leg loops• One ventral and two lateral attachment points• One dorsal eyelet on the waistbelt for suspending a restraint system
EN 358, EN 813
AVAO® BOD with FAST automatic buckles
AVAO® SIT with DoubleBack buckles
AVAO® SIT with FAST automatic buckles
Fall arrest harnesses, seat harnesses and work positioning belts
Type Size Dimensions in cm Weight
in kg
Item no.
A B
C71CFA0 0 60 - 90 45 - 65 2.33 49AGPABCF0
C71CFA1 1 70 - 110 45 - 65
Body height
160 - 180
165 - 185 2.37 49AGPABCF1
Type Size Dimensions in cm Weight
in kg
Item no.
A B
C79AAA1 1 70 - 110 45 - 65 1.12 49AGPASDB1
C79AAA2 2 80 - 130 60 - 75
Body height
-
- 1.14 49AGPASDB2
C79AFA0 0 60 - 90 45 - 65 1.2 49AGPASFS0
C79AFA1 1 70 - 110 45 - 65
-
- 1.21 49AGPASFS1
C79AFA2 2 80 - 130 60 - 75 - 1.23 49AGPASFS2
AVAO® SIT with DoubleBack buckles (black)
C79AAN1 1 70 - 110 45 - 65 1.12 49AGPASDBS1
C79AAN2 2 80 - 130 60 - 75
-
- 1.14 49AGPASDBS2
Type Size Dimensions in cm Weight
in kg
Item no.
A B
C71AAA1 1 70 - 110 45 - 65 2.1 49AGPAB1
C71AAA2 2 80 - 130 60 - 75
Body height
165 - 185
175 - 200 2.18 49AGPAB2
C71AFA1 1 70 - 110 45 - 65 165 - 185 2.19 49AGPABF1
C71AFA2 2 80 - 130 60 - 75 175 - 200 2.27 49AGPABF2
AVAO® BOD with DoubleBack buckles
49AGPAB1 49AGPABF1
49AGPASDBS1 49AGPASFS0
114 www.carlstahl-fallprotection.com
Essential for work at height and certain industrial activities, helmets offer effective protection for the head against impact and falling objects.
As there are no specific European standards for helmets designed forwork at heights, when manufacturing the model ranges intended for industrial users, Petzl focuses on two existing regulations: - Standard for industrial safety helmets (EN 397) - Standard for mountaineering helmets (protection against impactsEN 12492)
Helmets and accessories
Inte
rven
tion
sur
toitu
re, C
athé
dra
le d
e M
eaux
, par
Ab
sid
e©
Sté
pha
n D
enys
www.carlstahl-fallprotection.com 115
Helmets and accessories
A10BYA A10BWA A10BRA
A10BNA A10BOA A10BBA
Type Size
in cm
Item no.
A10BYA 53 - 63 49HEBBYA
A10BWA 49HEBBWA
A10BRA
A10BNA
A10BOA
Weight
in kg
0.445
53 - 63 0.445
53 - 63 0.445
53 - 63 0.445
53 - 63 0.445
Colour
yellow
white
red
black
orange
49HEBBRA
49HEBBNA
49HEBBOA
A10BBA 53 - 63 0.445blue 49HEBBBA
VERTEX BEST A10 BComfortable helmet for work at height and rescue
• The six-point mesh liner ensures optimum fit and comfort Impacts and blows are ab-sorbed by the deformation of the inner shell.
• The CenterFit adjustment system ensures the helmet sits firmly on the centre of thehead.
• Side slots for the use of standard hearing protection equipment• Inserts for using a VIZIR face shield • Slot for attaching a PIXA headlamp • Four clips for attaching a headlamp with an elastic headband • The chin strap is designed to limit the risk of losing the helmet during a fall (strength
greater than 50 daN). • The helmet’s unventilated shell protects against electrical hazards and molten metal
splashes.
Certification: CE*, ANSI Z89.1-2009 Type I Class E, (CSA Z94,1-05 Type 1 Class C 9 available by special order)
* Meets the requirements of the EN 397 and EN 12492 standards on impact protection.Meets the requirements of the EN 397 and EN 50365 standards on electrical insula-tion. Meets the optional requirements of the EN 397 standard on molten metal splash,lateral deformation and use in low temperatures.
A10VYA A10VWA A10VRA
A10VNA A10VOA A10VBA
Type Size
in cm
Item no.
A10VYA 53 - 63 49HEVVYA
A10VWA 49HEVVWA
A10VRA
A10VNA
A10VOA
Weight
in kg
0.445
53 - 63 0.445
53 - 63 0.445
53 - 63 0.445
53 - 63 0.445
Colour
yellow
white
red
black
orange
49HEVVRA
49HEVVNA
49HEVVOA
A10VBA 53 - 63 0.445blue 49HEVVBA
VERTEX VENT A10 VComfortable ventilated helmet for work at height and rescue
Same design as VERTEX BEST A10 B
Additional ventilation holes with sliding shutters allow the ventilation to be adjusted asneeded from the outside.
Certification: CE EN 12492 *- UIAA- ANSI Z89.1-2009 Type I Class C- (CSA Z94.1-05 Type 1 Class C available by special order)
* Meets the requirements of the EN 397 and EN 12492 standards on impact protection.Meets the optional requirements of Standard EN 397 on lateral deformation and use inlow temperatures.
116 www.carlstahl-fallprotection.com
Helmets and accessories
VIZIR A15A, VIZIR A15AS ShadowProtective face shield for VERTEX and ALVEO helmets
• Quick and easy to attach to VERTEX and ALVEO helmets using purpose-built in-serts
• Two positions:- raised on top of the helmet if the face shield is not required- lowered in the working position in front of the face
• Scratch and fog-resistant• A15AS Shadow protects against sunlight
Certification A15A: CE EN 166, 1B, average speed particles ANSI Z87.1-2010, (CSA Z94.3-07 available on special request)
Certification A15AS Shadow: CE EN 166, 1B, average speed particles, CE EN 172, 5-2.5 (protective filter level 2.5) ANSI Z87.1-2010, (CSA Z94.3-07 available on special request)
Type Item no.
VIZIR A15A 49ZBA15
Weight
in kg
0.06
Description
Face shield
VIZIR A15AS 49ZBA15AS0.06Face shield
GR1C GR2B H31P3E 300 5B V4JKSV V4H P3EV/2
PELTORAccessories for VERTEX helmets. For expansion withvisor, neck guard and hearing protectors. Standards: H31PBE 300: CE EN 352-3. V1B and V4JKSV: CE EN 1661995 and EN 172 1995
Type Item no.
GR1C 49ZBGRZ1
GR2B 49ZBGR2B
Weight
in kg
0.065
0.015
Description
Neck guard
Visor seale V1 VISIERE
H31P3E 300 49ZBH310.295Capsule ear protectors
5B 49ZBV1B0.065Face shield, nylon mesh
V4JKSV 49ZBV4J0.065Face shield, etched metal
V4H 49ZBV4H0.065Face shield poly-
carbonate 1.2 mm
P3EV/2 49ZBP3EV0.200Plug-in fastening adapter
for PELTOR VISIERE
A15A A15AS Shadow
A10SRA A10SWA
Type Size
in cm
Item no.
A10SRA 53 - 63 49HEVSRA
A10SWA 49HEVSWA
Weight
in kg
0.445
53 - 63 0.445
Colour
red
white
VERTEX ST A10 SLightweight helmet for work at height and rescue
Same design as VERTEX BEST A10 B
Specifications :If the helmet gets snagged, the chin strap opens at 25 daN.
Certification: CE EN 397*, CE EN 50365*- ANSI Z89.1-2009 Type I Class E- (CSA Z94.1-05 Type 1 Class E available by special order)
* Meets the requirements of the EN 397 and EN 12492 standards on impact protection.Meets the requirements of the EN 397 and EN 50365 standards on electrical insula-tion. Meets the optional requirements of the EN 397 standard on molten metal splash,lateral deformation and use in lowtemperatures.
www.carlstahl-fallprotection.com 117
Helmets and accessories
A20BYA A20BWA A20BRA
Type Size
in cm
Item no.
A20BYA 53 - 63 49HEABYA
A20BWA 49HEABWA
A20BRA
Weight
in kg
0.345
53 - 63 0.345
53 - 63 0.345
Colour
yellow
white
red 49HEABRA
ALVEO BEST A20 B
Lightweight helmet for work at height and rescue
• Lightweight helmet with comfortable foam padding that is barely noticeable when wear-ing the helmet. Impacts and blows are absorbed by the deformation of the polystyrenefoam inner shell.
• The CenterFit adjustment system ensures the helmet sits firmly on the centre of thehead.
• Side slots for the use of standard hearing protection equipment• Inserts for using a VIZIR face shield• Slot for attaching a PIXA headlamp• Four clips for attaching a headlamp with an elastic headband• The chin strap is designed to limit the risk of losing the helmet during a fall (strength
greater than 50 daN).• The helmet’s unventilated shell protects against electrical hazards and molten metal
splashes.
Certification: CE*- ANSI Z89.1-2009 Type I Class E
* Meets the requirements of the EN 397 and EN 12492 standards on impact protection.Meets the requirements of the EN 397 and EN 50365 standards on electrical insula-tion. Meets the optional requirements of the EN 397 standard on molten metal splash,lateral deformation and use in low temperatures.
The helmet can be easilyadjusted even whenwearing gloves by simul-taneously activating theCenterFit system’s twoadjustment wheels tokeep the helmet in thecentre of the head.
A20VYA A20VWA A20VRA
Type Size
in cm
Item no.
A20VYA 53 - 63 49HEAVYA
A20VWA 49HEAVWA
A20VRA
Weight
in kg
0.340
53 - 63 0.340
53 - 63 0.340
Colour
yellow
white
red 49HEAVRA
ALVEO VENT A20 VLightweight, ventilated helmet for work at height and rescue
Same design as the ALVEO BEST A20B
Additional feature: ventilation openings
Certification: CE EN 12492 *- UIAA- ANSI Z89.1-2009 Type I Class C
* Meets the requirements of the EN 397 and EN 12492 standards on impact protection.Meets the optional requirements of the EN 397 standard on the lateral deformationand the use in low temperatures.
On request:- Transparent label, type A10100- Reflective label, type A20110- Absorbent foam padding, type A20200
118 www.carlstahl-fallprotection.com
JANE L50Non-adjustable dynamic rope lanyard
Can be used in a fall arrest system in conjunction with an energy absorber.
CE EN 354
GRILLONAdjustable lanyard without connector
The 5, 10 and 20 m long versions can also be used as temporary lifeline.Their adjustment mechanism has a handle to loosen the taut rope (when at-tached to the central attachment point on the work positioning belt).
GRILLON HOOK
Sewn end connectionson rope lanyards are moretear resistant than knottedends
Lanyards for restraint systems and work positioning
L52A
002
2 m
L52A
003
3 m
L52A
004
4 m
L52A
005
5 m
L52H
002
2 m
L52H
003
3 m
L52H
004
4 m
L52H
005
5 m
L52M
003
3 m
There are two basic types of lanyards:- Energy absorbing lanyards are designed to absorb the arrest impact in the event of a fall.- Adjustable lanyards for work positioning guarantee a correct and comfortable work position. Petzl’s range also includes special lanyards for specificuses such as a lanyard used in conjunction with the ASCENSION rope clamp for climbing in difficult access conditions or an energy absorber with anintegrated lanyard for the ASAP guided type fall arrester.
Without connector With connectorHOOK
With connector MGO(without rope protection)
GRILLON MGO
Type Item no.
L5060 49VMJ060
L50100 49VMJ100
Weight
in kg
0.125
0.150
Lenght
in cm
60
100
L50150 49VMJ1500.195150
L50200 49VMJ2000.235200
Type Item no.Weight
in kg
Length
in m
L52A002 49VMGRA20.4352
Standard
Type Item no.Weight
in kg
Length
in m
Standard
Type Item no.Weight
in kg
Lenght
in m
Standard
EN 358, EN 795 B
L52A003 49VMGRA30.5153EN 358, EN 795 B
L52A004 49VMGRA40.5954EN 358, EN 795 B
L52A005 49VMGRA50.6755EN 358, EN 795 B
L52A010 49VMGRA101.05510EN 795 B
L52A015 49VMGRA151.45515EN 795 B
L52A020 49VMGRA201.90020EN 795 B
L52H002 49VMGRH20.6252EN 358
L52H003 49VMGRH30.7353EN 358
L52H004 49VMGRH40.8154EN 358
L52H005 49VMGRH50.8955EN 358
L52M003 49VMGRM30.9953EN 358
Trab
ajos
en
Altu
ras,
Xca
ret
par
k, R
ivie
ra M
aya,
Pla
yad
el C
arm
en, M
exic
o ©
Mar
cos
Ferr
o
Plastic sheaths and STRINGelements hold the connectorsin the correct position. Theyalso protect against abrasion.
www.carlstahl-fallprotection.com 119
Spare ropes for GRILLON
Spare ropes/energy absorber with integrated lanyards
ABSORBICA-Y L70150Energy absorber with integrated Y-lanyard
Sewn rope ends with plastic sheath andSTRING on the energy absorber side.
CE EN 355
ABSORBICA-Y MGO L70150 YMEnergy absorber with integrated Y-lan-yard and two MGO connectors
CE EN 355, CE EN 362
* Without connector
L59 L70150Y
L59MGO L70150YM
Spare ropes for Grillon HOOK
Spare rope for Grillon MGO
Type Item no.
L52R002 49VML52R02
Weight
in kg
0.236
Length
in m
2
L52R003 49VML52R030.323
L52R004 49VML52R040.44
L52R005 49VML52R050.495
L52R010 49VML52R100.8910
L52R015 49VML52R151.3815
L52R020 49VML52R201.520
Type Item no.Weight
in kg
Length
in cm
L59 49VMY0050.21080
L70150Y 49VMY0060.500150
Material
Webbing
Rope
Type Item no.Weight
in kg
Length*
in cm
L59MGO 49VMY0031.1280
L70150YM 49VMY0041.42150
Material
Webbing
Rope
Type Item no.
L52RH002
L52RH003
L52RH004
L52RH005
49VML52RH2
49VML52RH3
49VML52RH4
49VML52RH5
Weight
in kg
0.395
0.479
0.559
0.649
Length
in m
2
3
4
5
Type Item no.
L52RM003 49VML52RM3
Weight
in kg
0.6
Length
in m
3
ABSORBICA-Y L59Energy absorber with integratedY-lanyard
• For protection on a lifeline (ropeor cable) or a metal rail with inter-mediate anchorage points
• The two arms allow the user toremain connected to the safetysystem when passing intermedi-ate anchorage points
• Webbing with STRINGs on thethree ends
CE EN 355
ABSORBICA-Y MGO L59Energy absorber with integratedY-lanyard and two MGO connec-tors
• Version of the ABSORBICA-Ywith MGO connector for attach-ment to metal structures, steelcables and large-diameter bars.
• The MGO automatic-locking con-nectors have a large opening andare sewn on the rope end.
• End on the energy absorber sideprotected by STRING.
CE EN 355, CE EN 362
120 www.carlstahl-fallprotection.com
Energy absorbers with integrated lanyards
L58
L58MGO
L70150IM
L70150I
Energy absorbers with integrated lanyards are used when there is a risk of falling. Sized according to lanyard length, the energy absorber lowers theimpact force through the tearing of the webbing or special stitching. Petzl offers different types of energy absorbers with integrated lanyards.
Fall factor and clearanceThe fall factor is the relationship between the fall distance and the length of the rope or lanyard available for arresting the fall. It is calculated usingthe equation: Fall factor = fall distance/length of rope or webbing. Clearance is the minimum distance required beneath the user to preventhim/her from hitting anything during a fall. The energy absorber limits the impact force on the user during a fall. If no energy absorber is used, theuser risks serious injury in the event of a significant impact force. The system extends to absorb the impact force. This elongation must be taken intoaccount when calculating the clearance.
Source: Petzl VERTICAL ACTIVITIES - LIGHTING - Catalogue 2011
ABSORBICA-I L58Energy absorber with integrated lanyard
• For protection on a lifeline (rope or cable) ormetal rail
• Webbing with STRINGs on both ends
CE EN 355
ABSORBICA-I MGO L58MGOEnergy absorber with integrated lanyardand an MGO connector
• Version of the ABSORBICA-I with MGOconnector for attachment to metal struc-tures, steel cables and large-diameterbars.
• The MGO automatic-locking connectorhas a large opening and is sewn onto therope end.
• End on the energy absorber side protect-ed by STRING.
CE EN 355, CE EN 362
ABSORBICA-I-MGO L70150 IMEnergy absorber with integrated lanyard and anMGO connector
CE EN 355, CE EN 362
ABSORBICA-I L70150IEnergy absorber with integrated lanyard
Sewn rope ends with plastic sheath and STRING on theenergy absorber side.
CE EN 355
Type Item no.Weight
in kg
Length*
in cm
L58MGO 49VMA0030.65580
L70150IM 49VMA0040.825150
Material
Webbing
Rope
* Without connector
Type Item no.Weight
in kg
Length
in cm
L58 49VMA0010.16080
L70150I 49VMA0020.365150
0,35 m
Impact force < 6kN Impact force > 8 - 10kN
With ABSORBICA-I 80-lanyard and energy absorber
Fall factor 1: Without energy absorber
4 m Minimum
0,7 m
Impact force < 6kN Impact force > 10 - 14kN
With ABSORBICA-I 80-lanyard and energy absorber
Fall factor 2: Without energy absorber
4,35 m Minimum
4,35 m Minimum
4 m Minimum
www.carlstahl-fallprotection.com 121
Guided type fall arrestersG
roup
e F,
Pon
t d
u G
ard
, Fra
nce
© L
afou
che
122 www.carlstahl-fallprotection.com
Item no.
Item no.
49MAB71ALU
49MAB71AAA
ASAP
With its unique locking system, the ASAP has set new standards in the field of fall protection systems for workers at heights. During standard use,the device automatically follows the user’s movements on the rope without manual intervention. In the event of a fall or abrupt acceleration, the AS-AP locks onto the rope and stops the user from moving. The ASAP can be combined with an ASAP’SORBER energy absorbing lanyard to enableusers to work at a distance from the rope.
ASAP LOCK
The ASAP LOCK guided type fall arrester has been developed for easier handling while climbing ropes. During standard use, the device automatical-ly follows the user’s movements on the rope without manual intervention. In the event of a fall or abrupt acceleration, the fall arrest device locks ontothe rope and stops the user from moving. The ASAP LOCK’s integrated locking function enables users to immobilise the device to reduce the fallheight. The connection arm prevents the loss of the device when passing interim anchors. The ASAP LOCK is used with an energy absorbing lan-yard to enable users to work at a distance from the rope.
ASAP B71ALUGuided type fall arrester for ropes with locking function
• Permanent protection against falls:- Locks in the event of a fall, slip or uncontrolled descent- Works on vertical or angled ropes- Locks onto the rope even if the user grabs for the device during a fall
• The fall arrest device’s integrated locking function enables users to immo-bilise the device to reduce the fall height. This function also stops the ropefrom being pulled upwards in high winds.
• Simple and efficient:- The ASAP runs up and down ropes without manual intervention- Can be easily attached and detached from the rope at any point- The connection arm prevents the loss of the device when passing interim anchors
- Used with an ASAP’SORBER energy absorbing lanyard to enable users to work at a distance from the rope
CE EN 353-2 with ropes for which the device has been certified, e.g. Beal IN-DUSTRIE 11 mm, PETZL AXIS 11 mm (both with a sewn end loop)*, CE EN12841 type A with all semi-static ropes (EN 1891 type A) from 10.5 to 13 mmdiameter, e.g. BEAL Antipodes 10.5 mm, Petzl Parallel 10.5 mm* ANSI Z359.15
* For further information, please visit www.petzl.com/ASAP
ASAP B71AAAGuided type fall arrester for ropes
• Permanent protection against falls:- Locks in the event of a fall, slip or uncontrolled descent- Works on vertical or angled ropes- Locks onto the rope even if the user grabs for the device during a fall
• Simple and efficient:- The ASAP runs up and down ropes without manual intervention- Can be easily attached and detached from the rope at any point- Can be combined with an ASAP’SORBER energy absorbing lanyard to enable users to work at a distance from the rope
• Supplied with an automatically locking OK TRIACT-LOCK karabiner
CE EN 353-2 with ropes for which the device has been certified, e.g. Beal IN-DUSTRIE 11 mm, PETZL AXIS 11 mm (both with a sewn end loop)*, CE EN12841 type A with all semi-static ropes (EN 1891 type A) from 10.5 to 13 mmdiameter, e.g. BEAL Antipodes 10.5 mm, Petzl Parallel 10.5 mm*
* For further information, please visit www.petzl.com/ASAP
Activation button for the locking function
Safety catch on the locking wheel
Locking wheel
Connection arm
Connection eyelet for the ASAP’SORBER
Type
Type
Weight
in kg
Weight
in kg
B71ALU
B71AAA
Clearance
in m
Clearance
in m
3.90
3.90
0.42
0.37
Guided type fall arresters
www.carlstahl-fallprotection.com 123
Guided type fall arresters
ASAP’SORBEREnergy absorbing lanyard for ASAP or ASAP LOCK
• Connects the ASAP or ASAP LOCK guided type fall arrester to the harness.• Enables the user to work at a distance from the rope to:
- Clear the work area- Protect the rope from sharp tools and molten metal splashes
• Absorbs energy during a fall by the special stitching tearing• Available in two lengths to enable an optimum balance between the distance
from the rope and the fall height reduction.• The zipped fabric pouch protects the energy absorber against abrasion and
splashes and enables its regular inspection.• The ends are equipped with STRINGs to hold the connector in position and
protect the webbing from abrasion.
CE EN 355
ASAP’SORBER
The ASAP’SORBER lanyard connects to the ASAP or ASAP LOCK guided type fall arrester to enable the user to work at a distance from the rope inorder to protect it during certain work phases. The lanyard is equipped with a strap energy absorber located in a zipped fabric pouch to protect itagainst abrasion and enable its regular inspection. This lanyard is available in two lengths to enable an optimum balance between the distance fromthe rope and the fall height reduction.
Type Item no.Weight
in kg
L71AA20 49VMAA200.075
Length
in cm
20
L71AA40 49VMAA400.10540
Length after full extension
in m
0.45
0.80
Minimum necessary
clearance in m
3.90
4.10
Attachment to the user’s harness with theaid of an ASAP’SORBER energy absorbinglanyard (20 cm or 40 cm)
Work in the center of the roof(limited access area).Short-term application witha individual protectionsystem.
Work in edge areas.
L71AA20 L71AA40
124 www.carlstahl-fallprotection.com
Am'D M34 SL, M34 TLAsymmetrical locking karabiner
• Ideal for attaching equipment• For use at the end of a lanyard• D-form offers an excellent strength-to-weight ratio
OK M33 SL, M33 TLSymmetrical locking karabiner
• Versatile oval shape for optimally positioning equipment (pulleys, rope grabs etc.)
• Ideal for hauling
WILLIAM M36 SL, M36 TLPear-shaped locking karabiner
• Large karabiner for connecting multiple elements• Pear shape for attachment with a Munter hitch
OXAN M72 SL/SLN, M72 TL/TLA/TLNSymmetrical steel locking karabiner
• Keylock system helps prevent the karabiner from snagging duringattachment/detachment
• Red indicator provides a visual warning when the karabiner is un-locked
For locking versions, see the table on p. 125OMNI M37 SL, M37 TLLocking semi-circle karabiner
• Used to close harnesses on which two attachment points have to be connected (example: NEWTON).
• Designed for three-axis loading
M36 SL M72 SL M72 SLN
M72 TLA M72 TLN
M72 TLM36 TL
M37 SL M37 TL
Karabiners, connectors
M33 SL M33 TL M34 SL M34 TL
VULCAN M73 SL/SLN, M73 TL/TLA/TLNHigh-strength steel locking karabiner
• Used for heavy loads• Large karabiner for connecting multiple elements• Keylock system helps prevent the karabiner from
snagging during attachment/detachmentFor locking versions, see the table on p. 125
M73 SL M73 SLN
M73 TLA M73 TLN
M73 TL
Hyd
roka
rst,
Vor
epp
e, Is
ére
Fran
ce ©
Laf
ouch
e
Standard
CE EN 362
CE EN 362
CE EN 362
CE EN 362
CE EN 362
CE EN 362
CE EN 362
CE EN 362
CE EN 362
CE EN 362
CE EN 362
CE EN 362
CE EN 362, NFPA 1983 Light Use,
ANSI Z359.1, CSA Z259.12
CE EN 362, NFPA 1983 Light Use,
ANSI Z359.1, CSA Z259.12
CE EN 362
CE EN 362
CE EN 362
CE EN 362, NFPA 1983 Light Use,
ANSI Z359.1, CSA Z259.12
CE EN 362, NFPA 1983 Light Use,
ANSI Z359.1, CSA Z259.12
CE EN 362 Typ Q
CE EN 362 Typ Q
CE EN 362 Typ Q
CE EN 362 Typ Q
www.carlstahl-fallprotection.com 125
Type Material Mouth
opening
in mm
Weight
in g
Item no.
Steel Aluminium
M33SL X 24 19 75 49KH0010
M33TL X 24 19 75 49KH0011
M34SL X 28 21 75 49KH0012
M34TL X 28 21 75 49KH0013
M36SL X 25 25 90 49KH0014
M36TL X 25 24 90 49KH0015
M37SL X 20 22 86 49KH0016
M37TL X 20 22 92 49KH0017
MGO60
P11
X* X*
Locking method
SCREW-LOCK
TRIACT-LOCK
SCREW-LOCK
TRIACT-LOCK
SCREW-LOCK
TRIACT-LOCK
SCREW-LOCK
TRIACT-LOCK
Automatic 25 60 455 49VMMGO6
10
8
7
7
7
7
15
15
-
Minimum breaking load in kN
7
7
8
8
7
7
7
7
M72SL X 27 23 215 49KHM72SLSCREW-LOCK 16 7
M72SLN X 27 23 215 49KHM72SLNSCREW-LOCK 16 7
M72TL X 27 23 230 49KHM72TLTRIACT-LOCK 16 7
M72TLA X 27 21 250 49KHM72TLATRIACT-LOCK 16 7
M72TLN X 27 21 250 49KHM72TLNTRIACT-LOCK 16 7
M73SL X 40 32 290 49KHM73SLSCREW-LOCK 16 11
M73SLN X 40 32 290 49KHM73SLNSCREW-LOCK 16 11
M73TL X 40 32 310 49KHM73TLTRIACT-LOCK 16 11
M73TLA X 40 30 330 49KHM73TLATRIACT-LOCK 16 11
M73TLN X 40 30 330 49KHM73TLNTRIACT-LOCK 16 11
-
XQuick link 25 12 150 49KH0P1110 -
P11-8 XQuick link 25 10 85 49KHP11810 -
P15 XQuick link 25 16 60 49KH0P1510 -
P18 XQuick link 25 10 55 49KH0P1810 -
*Steel catch, aluminium connector
Karabiners, connectors
MGO60Very large automatic locking directional connector
• For attachment to metal structures, steel cablesand large-diameter bars
• Ergonomic unlocking handle
P11 / P11-8Triangular steel quick link
• High breakage strength on all axes• Closed with a wrench- P11: 10 mm diameter rod stock- P11-8: 8 mm diameter rod stock
P15Oval steel quick link
• High breakage strength on all axes• Closed with a wrench
P18Semi-circle aluminium alloy quick link
• Used to close harnesses on which two attachmentpoints have to be connected
• High breakage strength on all axes• Closed with a wrench
KEY-LOCK systemComprising the body and catch, theinterface does not have a hook andtherefore cannot be hung on anchor-ages, the rope or the harness etc.
TRIACT-LOCK
Automatic locking system for regularopening and closing
• Quick to unlock in two steps by raising and turning the sleeve
• Suitable for karabiners that are frequently opened and closed
SCREW-LOCK
Manual locking system for occasionalopening and closing
• The red band provides a visual warn-ing when the karabiner is unlocked
• Recommended for harsh environ-ments where single-handed attach-ment and detachment is required orwhere mud or ice could cause an au-tomatic locking mechanism to mal-function
• Suitable for karabiners that are occa-sionally opened and closed
126 www.carlstahl-fallprotection.com
INDUSTRYSemi-static polyamide kernmantle ropewith sewn ends
CE EN 1891 Type A
Semi-static polyamide kernmantle ropes ACCESS 10.5 mm UNICOR 200 m
CE EN 1891 Type A
Ropes, accessories
Type Static
strength
in kN
Item no.
IND11RT010 30 49SEIN10
IND11RT020 30 49SEIN20
IND11RT030 30 49SEIN30
IND11RT060 30
Length
in m
10
20
30
60
Weight in
kg
1.00
1.20
2.32
4.65
Static strength
Sewn rope end
in kN
24
24
24
24
Rope-Ø
in mm
11
IND11RT015 30 49SEIN1515 1.162411
11
11
11 49SEIN60
Type Static
strength
in kN
Item no.
ACC105B200 30 49SEACCB
ACC105O200 30 49SEACCO
Static strength
with figure eight
knot
in kN
19.5
19.5
Colour
blue-white
orange-white
Rope-Ø
in mm
10.5
10.5
Weight
per reel
in kg
13.0
13.0
Length
in m
(reel)
200
200
Type Static
strength
in kN
Item no.
IND11R200 30 49SEA201
Length
in m
(reel)
200
Weight
per m
in g
65
Static strength
with figure eight knot in
kN
19.5
Rope-Ø
in mm
11
PRO WORK 35, 45
Carry bag
HF welding technology: no stitching and extremely hard-wearingand waterproof thanks to the use of high-frequency welding tech-nology. Ultra-resistant biface PVC- Reinforced base- Ergonomically designed back - Comfortable hand straps - Metal adjustment buckles - Transparent window for identification - Waterproof outer pocket- Side hand strap
Type Item no.
PRO WORK 35 49ZBPW35
Weight
in kg
1.08
Capacity
in litres
35
PRO WORK 45 49ZBPW451.5345
Type Item no.
PRO WORK 60 49ZBPW60
Weight
in kg
1.825
Capacity
in litres
60
PRO WORK 60
Carry bag
HF welding technology: no stitching and extremely hard-wearingand waterproof thanks to the use of high-frequency welding technology. Ultra-resistant biface PVC- Large rigid opening- HF welding technology - Comfortable waistbelt and shoulder straps - Ergonomically designed back - Metal adjustment buckles - Transparent window for identification
www.carlstahl-fallprotection.com 127
SET CATERPILLAR P68
Modular rope protection
• To protect moving ropes from abrasion• The modules are connected with quick links: the number of
modules can be varied as necessary• Each module can be positioned independently to adapt to the
terrain• Kit includes: 4 modules + 6 quick links.
PROTEC C45N
Flexible rope protection
• To protect ropes from abrasion• Lightweight, durable PVC sheath• Velcro® closure and clip for easy and quick installation
TRANSPORT
Carry bag PERSONNEL, PORTAGE, TRANSPORT
• Padding on the shoulder straps, back and waistbelt with addedcomfort
• Carrying handles on the sides and the carry bag
CARITOOL
Tool holder
• Tools can be attached and removed with one hand• The small hole can be used to attach a keeper cord to secure
the tool• Slips through the waist belt slots or onto the harness webbing
and always stays in place
This tool holder is not a form of PPE!
CORDEX PLUS K53
Belay/rappel gloves
• Made from natural, high-quality leather with reinforced palms• Durable double layer of leather
(fingertips, palm, between thumb and index finger)• Back is made of durable leather with abrasion-resistant stretch
nylon in the joint areas
P42 P42L
Type Item no.
P68 49SS0P68
Weight
in kg
1.055
Type Item no.
C45N 49SSC45N
Weight
in g
95
Type Item no.
S42Y 045 49ZBS42Y045
Weight
in kg
1.25
Capacity
in litres
45
S43Y 030 49ZBS43Y0300.8530
S44Y 015 49ZBS44Y0150.4515
Type Item no.
K53SN 49HSK53SN
Size
S
K53MN 49HSK53MNM
K53LN 49HSK53LNL
K53XLN
Colour
black
black
black
black 49HSK53XLNXL
Weight
in g
150
150
150
150
K53XST 49HSK53XSTXS
K53ST 49HSK53STS
K53MT 49HSK53MTM
K53LT
beige
beige
beige
beige 49HSK53LTL
150
150
150
150
K53XLT beige 49HSK53XLTXL 150
Type Item no.
P42 49ZBP42
Weight
in g
25
Load in kg
5
P42L 49ZBP42L6015
Accessories
S44Y015 S43Y030 S42Y045
128 www.carlstahl-fallprotection.com
For both work at height and rescue, access from above is preferable as the force of gravity can be used. Descenders are designed to help regulate friction and thus control the descent speed. They can also be used at specific points on the rope to help position the user. Some descenders can also be used to secure a leading climber.
Descenders
Pro
fil, V
ILLA
ME
DIT
ER
RA
NE
E, R
égio
n A
lpes
Côt
e d
’Azu
r, M
arse
ille,
Fra
nce
- A
rchi
tect
e : B
OE
RI S
tud
io, M
ilano
© L
abou
che
www.carlstahl-fallprotection.com 129
Descenders, rope grabs
Self-braking descender I'D SSelf-braking descender with anti-panic function
• Multi-functional handle that, in line with the situation at hand, allowsthe user to:
- release the rope and commence the descent (the descent speed iscontrolled by the hand on the braking side of the rope);
- move more easily along slanted or horizontal terrain (thanks to the button on the handle);
- lock the rope and position him/herself without tying off the device (handle locked);
- engage the anti-panic function (if the user pulls too hard on the handle,the clamping mechanism is released and automatically brakes to stopthe descent).
• A safety catch reduces the risk of an accident due to the incorrect installation of the device on the rope
• The pivoting cam makes it easier to take up the slack in the rope. Canalso be used to make a reversible haul system and for short ascents (in conjunction with a foot loop and a rope loop).
• For rope access work Safety gate on the moving side plate for rope with diameters of 10 to11.5 mm
• Individually tested
CE EN 341 Class A, CE EN 12841 Type C, NFPA 1983 General Use
Self-braking descender RIGCompact self-braking descender for rope access work in difficult toreach areas or rescue situations for expert users. For rope diameters of 10.5 – 11.5 mm
• Designed for expert users for rope access work• Multi-functional handle that, in line with the situation at hand, allows
the user to:- release the rope and control the descent with the hand on the free
end of the rope- lock the rope and position him/herself without tying off the device• The automatic return system on the handle limits the risk of
accidental activation• The handle ‘parked’ position reduces the risk of the handle snagging
when the descender is being carried on the harness• The safety gate on the moving side plate helps prevent the device
from being dropped and facilitates its installation on the rope and thepassing of intermediate anchors
• The pivoting cam makes it easier to take up the slack in the rope.Can also be used to make a reversible haul system and for short ascents (in conjunction with a FOOTPRO foot loop and an ASCENSIONhandled ascender).
CE EN 12841 Type C, CE EN 341 Class A, NFPA 1983 Technical Use
Emergency ascender TIBLOC B01• Extremely compact and light• Versatile: suitable for use for ascending ropes
or as a backstop for hauling systems• Cam with teeth and a self-cleaning slot:
even suitable for use on dirty or icy ropes• Attachment hole for keeper cord• For use on single ropes with an 8 to 11 mm diameter with a
locking karabiner with a 10 to 12 mm round or oval cross section• Individually tested
CE EN 567
FREINO
Locking karabiner with friction spur for descenders
• The karabiner is attached to the rope for a controlled descent using a descender
• For use with single ropes and the devices I’D, RIG, STOP, GRIGRI, SIMPLE and HUITStrength 25 kN longitudinal, 10 kN diagonally, 9 kN open, Standards CE EN 362, EN12275 Type B
Chest rope clampCROLL B16BAA
for use at chest-height
• Used with the ASCENSION handled rope clamp for ascending ropes
• Toothed cam with self-cleaning slot (optimisesperformance when used with icy or muddyropes). Stainless steel cam
• The lower attachment hole is angled to keep therope clamp flat against the chest once attached to the rope
• Reinforced with stainless steel to prevent premature wear due to abrasion
• Upper hole for attaching a SECUR shoulder strapto keep the rope clamp in position
• Rope diameter: 8 to 11 mm
Certified:: CE EN 567, CE EN 12841 Type B
Connection bolts
Moving side plate
Safety gate
Attachment hole
Multi-functional handle D21A D21AN
Type Item no.Weight in kg
D20OSO 49ASD200S00.53
Typ Bestell-Nr.Gewicht in g
M42 85 49KHM42FR
Preis/Stk. €
33,60
Type Item no.Colour
D21A 49ASD21Ayellow
D21AN 49ASD21ANblack
Weight in kg
0.38
0.38
Type Item no.Weight in kg
B01 49SK0B010.04
Type Item no.Weight in kg
B16BAA 49SKB16BAA0.085
130 www.carlstahl-fallprotection.com
Rope clamps, foot loops
Handled ascender ASCENSION B17
Versions for the right annd left hands
• Ergonomically-shaped grip for comfortable and efficient handling• Due to the wide opening the grip can also easily handled with thick
gloves. • Ergonomically shaped upper part for a maximum efficiency during pul-
ling with both hands.• Completely integrated release lever in the body of the rope clamp to
avoid tripping.• Toothed buckle cam with cleaning slot for a optimal function during all
conditions (iced, silty rope etc.).• Big eyelet in the lower part for attachment of karabiners from the
PROGRESS-lanyard and the FOOTAPE- or FOOTCORD webbing footloop.
• Upper loop for attachment of the rope.• Material: aluminium, chromed steel, plastic, rubber, nylon.• Rope diameter: 8 up to 13 mm.
Certified: CE EN 567, CE EN 12841 Type B,NFPA 1983 General Use, EAC
B17ARA
Rope grabBASIC B18BAA
Light, versatile rope clamp
• Used to ascend a fixed rope oras a progress capture pulley in ahauling system
• Toothed cam with self-cleaningslot (optimises performancewhen used with icy or muddyropes). Stainless steel cam
• The wide lower hole makes iteasy to connect karabiners forlanyards and foot loops
• The upper hole is used to clip akarabiner around the rope
• Rope diameter: 8 to 11 mm
Certified: CE EN 567, CE EN 12841 Type B
B18BAA
FOOTAPE C47A
Adjustable webbing foot loop
• Attaches to the ASCENSION han-dled rope clamp and the BASICrope clamp for rope ascents.
• Underfoot strap is abrasion-resist-ant and rigid to make it easier tostep into. Height-adjustable to fitall footwear types.
• The DoubleBack buckle can beused to adjust the foot loop height
Type Item no.Weight
in kg
C47A 49SKC47A0.076
Type Item no.Weight
in kg
B18BAA 49SKB18BAA0.085
B17ALA
Type Item no.Weight
in kg
B17ALA 49SKB17ALA0.165
B17ARA 49SKB17ARA0.165
The two component material ergonomic shaped grip providesstability for the index finger andwas widened in the lower part toavoid a slip down of the hand. Thenew design increases the comfortand enables a more efficient ascentat the rope.
The ergonomic shaped upper partenhances the efficiency during pulling with both hands.
Due to the release lever the handascender can be attached to therope and taken off everywhere withone hand. The ascender is easy tohandle also with gloves.
The lower eyelet is big enough toattach the karabiner from the PROGRESS-lanyard and the FOOTAPE- or FOOTCORD webbing foot loop.
NEW!
www.carlstahl-fallprotection.com 131
Pulleys
Pulleys
Pulleys are used to lift loads or to lift a person in a rescue situation. Some pulleys are fitted with a rope grab to facilitate certain tasks. Specializedpulleys also allow for movement along a rope or cable for moving loads or evacuating people.
Progress capture pulleys
These pulleys replace the conventional return roller + rope grab combination. They are extremely versatile and can be used to lift loads in haulingsystems and as a backstop.
They fulfil two functions:• Function as a rope grab:
Toothed cams with a self-cleaning stop for use even on dirty or icy ropes.The ergonomically-shaped safety catch can be operated simply, even when wearing gloves.
• Function as a return roller:The safety catch can be engaged in an open position to use the device as a standard return roller.
Type Item no.Weight
in kg
P51A 49SRP51A0.265
Rope-Ø
in mm
8-13
Locking button on the clamping mechanism
Attachment holeClamping cam
Safety lock on the capture pulley(here, shown as unlocked)
Attachment hole for setting up a chain block
High-performance progress capture pulleyPRO TRAXION P51Awith backstop
• Capture pulley protected against loss:- The rope can be positioned in the capture pulley attached to the
anchorage point• Particularly suited to hauling heavy loads:- The large aluminium sheave with a sealed ball bearing ensures
outstanding efficiency- The side plate locks when subjected to a load and prevents the
capture pulley from opening during use• Highly versatile:- Lower attachment hole for setting up different types of chain blocks- Toothed clamping cam with self-cleaning slot optimises performance
under all conditions (frozen or dirty ropes etc.), suitable for use as asimple pulley by locking the clamping mechanism in the open position
CE EN 567, NFPA 1983 Technical Use
EP
ICU
RE
, Usi
ne r
etra
item
ent
des
eau
x, P
ierr
e B
enite
, Rho
ne, F
ranc
e ©
Laf
ouch
e
132 www.carlstahl-fallprotection.com
Pulleys
MICRO TRAXION P53
Ultra-light, high-performance progress capture pulley
Working load 2.5 kN x 2 = 5 kN, breaking strength: 7.5 kN x 2 = 15 kNWorking load as a progress capture pulley: 2.5 kNBreaking strength as a progress capture pulley: 4 kNUsed with an OK or WILLIAM karabinerStandard: CE EN 567
Type Item no.Weight
in g
P53 49SRP5385
Rope-Ø
in mm
8-11
Sheave-Ø
in mm
25
Type Item no.Weight
in g
Rope-Ø
in mm
Sheave-Ø
in mm
P54 49SRP541458-11 25
FIXE
Pulley with fixed side plates
Working load 5 kN, breaking strength 23 kN,Standard: CE EN 12278
P05W P05WN
PARTNER
Highly efficient ultra-compact pulley
Working load 5 kN, breaking strength 15 kN,Standard: CE EN 12278
MINI
Lightweight Prusik pulley with rotatable side plates
Working load 5 kN, breaking strength 23 kN,Standard: CE EN 12278, NFPA 1983 Technical Use
MOBILE
Versatile ultra-compact pulley
Working load 5 kN, breaking strength 15 kN,Standard: CE EN 12278
Type Item no.Weight
in g
P05W 49SRP05W90
Rope-Ø
in mm
7-13
Sheave-Ø
in mm
21
P05WN 49SRP05WN907-13 21
Colour
yellow
black
Type Item no.Weight
in g
P52A 49SRP52A56
Rope-Ø
in mm
7-11
Sheave-Ø
in mm
25
Type Item no.Weight
in g
P59A 49SRP59A80
Rope-Ø
in mm
7-11
Sheave-Ø
in mm
25
Type Item no.Weight
in g
P03A 49SRP03A75
Rope-Ø
in mm
7-13
Sheave-Ø
in mm
21
JAG TRAXION P54
Double pulley with back rotation lock for a installation of a 4:1hoist in combination with the double pulley JAG
Working load: 2 x 1.5 kN x 2 = 6 kN Breaking strength: 2 x 4 kN x 2 = 16 kNStandard: CE EN 567, NFPA 1983 Technical Use
NEW!
www.carlstahl-fallprotection.com 133
Pulleys
TANDEM
Double pulley for Tyrolean traverses on rope
• The aluminium sheaves are mounted on self-lubricating bushingsfor efficiency
• Holds up to three karabiners• Working load: 10 kN
CE EN 12278
GEMINI
Lightweight double Prusik pulley
Working load 6 kN, breaking strength 23 kN,Standard: CE EN 12278, NFPA 1983 Technical Use
MINDER
Highly efficient Prusik pulley with rotatable side plates, openingfor up to three karabiners
Working load 8 kN, breaking strength 36 kN,Standard: CE EN 12278, NFPA 1983 General Use
TWIN
Highly efficient double Prusik pulley with rotatable side plates forup to three karabiners
Working load 12 kN, breaking strength 36 kN,Standard: CE EN 12278, NFPA 1983 General Use
KOOTENAY
Knot-passing pulley
Working load 5 kN x 2 = 10 kNStandard: CE EN 12278
RESCUE
Pulley with rotating side plates designed for rescue operations
Working load 8 kN, breaking strength 36 kN,Standard: CE EN 12278, NFPA 1983 General Use
P50A P50AN
Type Item no.Weight
in g
P21 49SR0P21220
Rope-Ø
in mm
≤ 13
Type Item no.Weight
in g
P66A 49SRP66A135
Rope-Ø
in mm
7-11
Sheave-Ø
in mm
25
Type Item no.Weight
in g
P67 49SRP671390
Rope-Ø
in mm
8-19
Sheave-Ø
in mm
76
Height
in mm
260
Type Item no.Weight
in g
P50A 49SRP50A185
Rope-Ø
in mm
7-13
Sheave-Ø
in mm
38
P50AN 49SRP50AN1857-13 38
Colour
yellow
black
Type Item no.Weight
in g
P65A 49SRP65A450
Rope-Ø
in mm
7-13
Sheave-Ø
in mm
51
Type Item no.Weight
in g
P60A 49SRP60A295
Rope-Ø
in mm
7-13
Sheave-Ø
in mm
51
134 www.carlstahl-fallprotection.com
ANNEAU C40
Sewn webbing sling
EN 795 Class B, EN 566:2006
Anchor devices
Anchors create an interface between the safety system and the structure or terrain.
The anchor device choice is determined by the type of terrain:- Rock and concrete: permanent anchors (bolt hangers, glue-in bolts) - Metal structures and trees: flexible anchor devices (webbing)
Anchor straps are designed for setting up temporary or mobile anchors.
If an anchor is to be permanently installed or if it is intended for intensive usage, a hanger or bolt hanger should be used.
In addition to the standard anchor devices, we offer a terrain rope device for horizontal movement and a number of accessories to optimise the an-chorage points from an ergonomic and functional perspective and guarantee the integrity of the connections.
C4060 C4080 C40120 C40150
Anchor straps, anchors
CONNEXION FIXE C42100
Anchor strap
CE EN 795 B, CE EN 354
CONNEXION VARIO C42V
Adjustable anchor strap
CE EN 795 B, CE EN 354
CONNEXION FAST C42F
Rapid adjust anchor strap
CE EN 795 B
Type Item no.Weight
in kg
C4060 49APA0600.059
Length
in cm
60
Breaking load
in kN
22
C4080 49APA0800.07880 22
C40120 49APA1200.115120 22
C40150 49APA1500.130150 22
Type Item no.Weight in kg
C42100 49VMC1000.375
Length in cm
100
Breaking load in kN
35
C42150 49VMC1500.412150 35
C42200 49VMC2000.495200 35
C42V 49VMCVAR0.42580-130 adjustable 22
C42F 49VMCFAS0.43020-150 adjustable 22
SWIVEL P58, SWIVEL OPEN
Swivel
• Prevents the rope from twisting when the loadrevolves around its own axle.
• Excellent performance and reliability due tomaintenance-free sealed ball-bearings.
• SWIVEL S P58 S: compact for smaller loads• SWIVEL L P58 L: designed for heavier loads.
Up to three connectors can be attached to theends.
• SWIVEL P58SO: suitable for pulleys, lanyards etc. openable attachment rings.
P58S: CE P58L: CE, NFPA 1983 GP58SO: CE, EAC, NFPA 1983 Technical Use
Type Item no.Weight
in g
P58S 49VMP58S95
Breaking load
in kN
23
P58L 49VMP58L15036
P58SO 49VMP58SO13023
P58S P58L P58SO NEW!
www.carlstahl-fallprotection.com 135
Bolt hangers and pitons
CŒUR GOUJON
Complete stainless steel anchor as-sembly
• Consists of a COEUR hanger, ex-pansion bolt and nut
• The hanger can be removed.
CE EN 795 A1, EN 959
Type Item no.Weight
in kg
P32 49AP0P320.094
Length
in mm
55
Ø Bore hole
in mm
10
Bolt hanger
Ø in mm
10
Shear strength
in concrete
50 MPa
in kN
25
Pull-out strength
in concrete
50 MPa
in kN
18
P33 49AP0P330.122671212 25 18
Type Item no.Weight
in kg
P55 49AP0P550.153
Length
in mm
70
Ø Bore hole
in mm
12
Bolt hanger
Ø in mm
10
Shear strength
in concrete
50 MPa
in kN
25
Pull-out strength
in concrete
50 MPa
in kN
25
P56 49AP0P560.017--- - -
Type Item no.Weight
in kg
P57 49AP0P570.250
Length
in mm
100
Ø Bore hole
in mm
16
Bolt hanger
Ø in mm
14
Shear strength
in concrete
50 MPa
in kN
50
Pull-out strength
in concrete
50 MPa
in kN
50
P41 49AP0P410.023--- - -
COLLINOX P55
Forged stainless steel glue-inbolt
CE EN 795 A1, EN 959
AMPOULE COLLINOX P56
Resin glue for COLLINOX
BAT’INOX P57
Forged stainless steel glue-inbolt
CE EN 795 A1, EN 959
AMPOULE BAT’INOX P41
Resin glue for BAT’INOX
136 www.carlstahl-fallprotection.com
Compact headlamps
Specifications:• Beam pattern: wide• Energy: 2 AA/LR6 batteries (included)• Battery compatibility: rechargeable Ni-MH and lithium• Certifications: CE, ATEX: Zone 2/22, HAZLOC: Class 1 div II,
Class 2 div II, ANSI/NEMA FL1• Watertightness: IP 67 (waterproof to -1 meter for 30 minutes, no
maintenance required after immersion)
PIXA 1 E78AHB 2
Rugged headlamp for the visibility in close range, with CONSTANTLIGHTING technology
• Headlamp keeps hands free for work.The headlamp can be worn:- on the head with the headband- attached to the helmet with a mounting plate (included)- or placed on the ground.
• Headlamp with CONSTANT LIGHTING technology: brightness does notdecrease gradually as the batteries are drained.
• Lighting for professionals that is reliable, practical and durable• Two lighting modes (low and high).• Proximity lighting mode: wide, comfortable beam for close work.• Automatically switches to reserve mode when batteries are
almost drained (signaled by blinking light).• Ergonomic knob is easy to use, even with gloves on.• Storage position helps protect the headlamp lens and prevents
inadvertently turning it on.• May be used in explosive atmospheres (ATEX: Zone 2/22).• Excellent resistance to falls (2 m), impacts and crushing (80 kg).• Comfortable and washable elastic headband.• Resistant to chemicals
(see www.petzl.com/PIXA).
Headlamps
The new PIXA headlamp range has been specially developed forcommercial users who conduct everyday work in the dark. Thanks to these headlamps, users have both hands free so thatthey can work efficiently and comfortably. The major benefits: robust structure, reliability, user-friendliness and diverse usage options. The four models in this headlamp range are designed fordifferent uses.
Type Item no.Weight
in kg
E78AHB2 49SLAHB20.160
MA
GN
UM
, Cirq
ue d
’Hiv
er B
OU
GLI
ON
E, P
aris
, Fra
nce
© S
tép
han
Den
ys
Wide beam for close work.
Type Lighting
technology
CONSTANT LIGHTING
Lighting
modes
Mode 1
(wide)
Mode 2
(wide)
Brightness
in lm
20
50
Distance
in m
10
15
Burn time
in hours
5
3
Reserve
brightness
in lm
20
Reserve
distance
in m
5
Reserve
burn time
in hours
15E78AHB2
Total battery life
in hours
27
18
Lighting performance
NEW!
www.carlstahl-fallprotection.com 137
Headlamps
PIXA 2 E78BHB 2
Rugged headlamp for the visibility in close range and movement,with CONSTANT LIGHTING technology
Equipment as PIXA 1 E78AHB2, difference:
• Several lighting modes adapt to each situation:- low mode adapted for close range work: mixed beam with a wide,
uniform flood- high mode adapted for movement: mixed beam with focused
component allows user to move around comfortably
PIXA 3 E78CHB 2
Rugged headlamp with several lighting beams for visibility in closerange, movement and long-range vision, with CONSTANT LIGHTINGtechnology
Equipment as PIXA 2 E78BHB2, difference:
• Several lighting modes adapt to each situation:- a mode adapted for close range work: wide, uniform beam- a mode adapted for movement: mixed beam with focused
component allows user to move around comfortably- a mode adapted for long-range vision: focused beam
• Automatically switches to reserve mode when batteries are almostdrained (signaled by blinking light and red indicator).
Type Item no.Weight
in kg
E78BHB2 49SLBHB/20.160
Type Item no.Weight
in kg
E78CHB2 49SLCHB20.160
Specifications:• Beam pattern: mixed• Others as PIXA 1 E78AHB2
Mixed beam: The headlamphas several lighting modes forclose range vision and movement.
Type Lighting
technology
CONSTANT LIGHTING
Lighting
modes
Mode 1
(mixed)
Mode 2
(mixed)
Brightness
in lm
30
70
Distance
in m
20
55
Burn time
in hours
12
3
Reserve
brightness
in lm
20
Reserve
distance
in m
10
Reserve
burn time
in hours
10E78BHB2
Total battery life
in hours
22
13
Lighting performance
Specifications:• Beam pattern: wide, mixed, focused• Certifications: CE, ATEX: Zone 2/22, HAZLOC: Class 1 div II,
Class 2 div II• Others as PIXA 2 E78BHB2
Several beams: The headlamphas several lighting modes forclose range vision, movementand long-range vision.
Type Lighting
technology
CONSTANT LIGHTING
Lighting
modes
Mode 1
(wide)
Modus 2
(mixed)
Modus 3
(focused)
Brightness
in lm
30
60
Distance
in m
20
50
Burn time
in hours
12
6
100 80 3
Reserve
brightness
in lm
20
Reserve
distance
in m
10
20
Reserve
burn time
in hours
10
15
E78CHB2
Total battery life
in hours
22
16
18
Leuchtleistungen
NEW!
NEW!
138 www.carlstahl-fallprotection.com
Type Item no.Weight
in kg
E78CHR2 49SLCHR20.145
High performance headlamp
ULTRA VARIO E54 H
Ultra-powerful multi-beam headlamp with rechargeable battery
• Headlamp keeps the hands free for work: may be worn on the head withthe headband, or mounted on a VERTEX (2011 version and later) or ALVEOhelmet with removable plates (included).
• Four modes adapt lighting to the situation (see illustration)• Rugged, excellent resistance to falls, to impacts and to crushing• Certification: CE
Waterproof (to -1 meter for 30 minutes) and dustproof (IP 67).
Scope of delivery:ACCU 2 ULTRA: 2600 mAHBattery charger: 100/240 VExchangeable plug EUR/USRemovable controls
Type Item no.Weight *
in kg
E54 H 49SLE54H0.375
*incl. batteries
Headlamps
PIXA 3R E78CHR 2
Rugged, rechargeable headlamp for frequent use, several lighting beams for visibility in close range, movement and long-range vision,with CONSTANT LIGHTING technology
Equipment as PIXA 3 E78CHB2, difference:
• For frequent use, with integrated rechargeable Lithium-Ion polymerbattery and quick charging dock (3 hours).
• Battery life parameters may be used to adapt lighting performanceto need (by rapidly turning the knob):- STANDARD: balance between brightness and burn time- MAX AUTONOMY: burn time prioritized- MAX POWER: brightness prioritized
• Charging dock for direct charging of the headlamp itself or only thebattery
Specifications:• Energy: rechargeable Lithium-Ion Polymer battery, 930 mAh• Recharge time: 3 hours• Certifications: CE, ATEX: Zone 2/22, ANSI/NEMA FL1• Others as PIXA 3 E78CHB2
Several beams: The headlamphas several lighting modes forclose range vision, movementand long-range vision.
Charging station for charging the headlamp without removing the battery. The battery can be chargedseparately, so that the user can usethe headlamp with his second battery.
Typ Lighting
technology
CONSTANT
LIGHTING
Configuration
STANDARD
MAX
POWER
MAX
AUTONOMY
Lighting
modes
Mode 1 (wide)
Mode 2 (mixed)
Mode 3 (focused)
Mode 1 (wide)
Mode 2 (mixed)
Mode 3 (focused)
Mode 1 (wide)
Mode 2 (mixed)
Mode 3 (focused)
Brightness
in lm
30
60
Distance
in m
20
50
Burn time
in hours
12
6
90
80
30
50
80
3
Reserve
brightness
in lm
20
Reserve
distance
in m
10
20
10
20
Reserve
burn time
in hours
E78CHR2
Total battery
life in hours
32
21
18
13
Lighting performance
30 12
18
32
27
NEW!
20
30
50
10
20
20
15
10
15
20
15
Type Lighting
technology
CONSTANT LIGHTING
Lighting modes
low-intensity
close-range work
movement
distance vision
Brightness
in lm
45
200
Distance
in m
20
40
Burn time
in hours
40
10
520 65 2,3
330 210 4
E54H
Lighting performance
www.carlstahl-fallprotection.com 139
Ultra-compact headlamp
TIKKA PRO E93HN
Ultra-compact headlamp for visibility in close range and occasional use
Ultra-compact headlamp for proximity lighting that facilitates working in a dark environment. Designed for occasional use, the TIKKA PRO headlamp has the benefit of being simple to use, with two lighting modes.
• Headlamp keeps the hands free:- compact- two lighting modes: a mode for proximity lighting and a mode
for limited movement• Easy to use:
- push-button for easy, quick lighting mode selection- elastic headband adjusts easily- washable headband- battery case opens easily for changing batteries- weather resistant acc. to IPX4
Type Item no.Weight *
in kg
E93HN 49SLE93HN0.085
*incl. batteries
Headlamps
Wide, homogenous beam for close-range visibility and shortdistance movement.
The push button allows an easy and fast activation of the suitable lighting mode for each particular situation.
Due to the phosphores-cent reflector the lamp can be locatedeasily in the dark.
Type Lighting
technology
CONSTANT LIGHTING
Lighting modes
proximity
short distance movement
Brightness
in lm
20
80
Distance
in m
20
40
Burn time
in hours
180
120E93HN
Lighting performance
KIT ADAPT
Kit for mounting a TIKKA type headlamp onto a helmet
The KIT ADAPT allows the user to mount or unmount a TIKKA headlamp on a helmet any time, and keeps the option of adjusting the tilt of the headlamp.
• Allows the user to easily mount a TIKKA headlamp on a helmet.• Maintains the option of adjusting the tilt of the headlamp.• Kit composed of two parts:
- an adhesive disk to mount on the helmet- an attachment plate for joining the headlamp to the disk Type Item no.Weight
in kg
E93001 49SLE930010.030
NEW!
140 www.carlstahl-fallprotection.com
Rescue ladders
„Kletter-Fix“ fire escape ladder
Kletter-Fix is a compact folding ladder made from steel cable and alumini-um rungs. It is small, stable, handy, non-flammable and suitable for useanywhere and at all times. Folding: folds up small like a book - but is tall asa high-rise building when used.
Technical data:
Capacity:- Whole ladder: 3 kN (≈ 300 kg / 4 people)- Individual rung: 1.5 kN (≈ 150 kg / 2 people)Rung width: 330 mmGap between rungs: 315 mmSupporting cable gap: 303 mmDistance from wall: 150 mm (type A)Test length: 495 cm (in accordance with BGI 638 – German em-ployers’ insurance association information 638)
Kletter-Fix type N:Standard version. This version should be selected if your emergency es-cape route goes over the balcony, over the roof eaves or down a facadewith protruding window ledges.
Kletter-Fix type A:Type A compact ladders have integrated spacers on every second rungand thereby offer maximum descent safety even on smooth facades.
Type Approx. length
in m
For no. of
storeys
Weight
in kg
Pack size
in cm
Item no.
KF-N5 5 2 3.2 33 x 20 x 10 49011005
KF-N8 8 3 4.5 33 x 20 x 10 49011008
KF-N12 12 4 6.9 33 x 20 x 10 49011012
KF-A5 5 2 4.7 33 x 20 x 19 49012005
KF-A8 8 3 6.8 33 x 20 x 19 49012008
KF-A12 12 4 8.9 33 x 20 x 19 49012012
Storage box for Kletter-Fix types N and A
Type Weight
in kg
Pack size
L x B x H in cm
Item no.
KF-N Box 3.44 38.5 x 14.5 x 26.7 49ZB10196
KF-A Box 4.32 38.5 x 23.5 x 26.7 49ZB10195
- A
- N
Test length: 495 cm (in acc. with BGI638 - German employers’insurance association information 638)
www.carlstahl-fallprotection.com 141
European regulations: “Who does what?”
European directives: at the suggestion of the Commission, the Council of the EuropeanCommunities issues directives (laws) establishing general regulations.
The European Committee for Standardisation is the body responsible for the harmonisa-tion and approval of standards and works with the Commission.
The Commission publishes these standards in the official journal of the European Com-munity.
The appointed bodies are determined by the European Commission and continually re-assessed. The manufacturers send them the design speci- fications of the PPE that re-quire a CE conformity assessment and all the necessary technical documents. They con-duct tests and certify that the PPE design specifications in question comply with the pro-visions of the directive and then issue CE certificates.
Manufacturers (or their appointed representatives) submit their products to the appointedbodies for CE conformity assessments. The bodies issue a declaration of conformity cer-tifying that the PPE products launched on the market comply with the provisions of thedirective and affix the CE symbol to each PPE element. The manufacturer must also guar-antee that the manufacturing process ensures the homogeneity of production (pursuantto Article 11 of Council Directive 89/686/EEC) and that the end product fully conforms tothe tested and approved design specifications.
Standards that apply to fall protection and rescue equipment
Within the scope of the implementation of Council Directive 89/686/EEC, the EuropeanCommission published several standards that govern the design and use of rescue equip-ment and personal fall protection safety equipment.
European directives and fall protection
Two important directives relate to personal protective equipment (PPE*): Council Directive89/686/EEC, which summarises the conditions for marketing PPE and their free move-ment within the European Union and the more specific Council Directive 89/656/EEC,which stipulates the minimum health and safety requirements for the use of PPE by peo-ple that work at heights.
• Council Directive 89/686/EEC on personal protective equipment
This directive mainly deals with product manufacturing. It lays down the conditions underwhich the products can be placed on the market, how they can be used in the memberstates and their free movement within the European Community. This directive establish-es general design rules and defines the certification procedure for the equipment, whichdepends on the risk class (the greater the risk, the stricter the certifica- tion procedure):
• Class I - Low risks• Class II - Risk of injury (EC type-examination is required)• Class III - Fatal hazards (EC type-examination is required and compliance with the ISO-9000 standard is necessary during production)
PPE designed to protect workers associated with fall-related risks belong to class III: pro-tection against fatal hazards or irreversible damage to health, in relation to which it is as-sumed that the user cannot detect the immediate effect in due time.
• Council Directive 89/656/EEC describes the use of PPE at the workplace
This directive describes the correct usage conditions for PPE and its role in improving thehealth and safety conditions in the workplace.
As stated in this directive, PPE means: “... all equipment designed to be worn or held bythe worker to protect him against one or more hazards likely to endanger his safety andhealth at work...”
On this basis, the directive reminds us that from the moment that health and safety risksare detected, priority must be given to eliminating these by means of collective technicalprotection or by measures, methods or procedures of work organisation.
PPE should only be considered if the necessary protection level cannot be achievedthrough the use of one of these methods or in the form of collective protection.
The directive emphasizes that:- all components of the PPE must comply with the valid regulations
such as Council Directive 89/686/EEC;- all PPE provided must correctly fit the wearer and be suitable for the
task to be carried out according to the manufacturer’s instructions;- in the event of several risk factors that require several items of
personal protective equipment to be used at the same time, theseequipment items must be compatible;
- the PPE components should be designated for personal use in sofar as possible.
According to the directive, the employer must therefore:- conduct a risk assessment study;- define the equipment properties necessary to protect the
employees;- provide employees with PPE that complies with the legal
regulations free of charge;- conduct regular equipment inspections and note the results
on the product’s ID cards;- retain supporting documents on the assessments and the
reasons that justify the use of a particular type of PPE.
*Definition of personal protective equipment (PPE)PPE is any type of device or equipment worn or held by a person to protect him/herselfagainst dangers that could be detrimental to his/her health or safety.
Regulations and standards
Extract of regulations:
DIN EN 341 DescendersEN 353-1:2014 PPE; Guided type fall arresters including a anchor - part 1: Guided type fall arresters including a rigid anchorDIN EN 353-2 PPE; Guided type fall arresters including a flexible anchorDIN EN 341 PPE; DescendersDIN EN 354 PPE; LanyardsDIN EN 355 PPE; Energy absorbersDIN EN 358 PPE for positioning and prevention of falls; positioning systemsDIN EN 360 PPE; Retractable type fall arrestersDIN EN 361 PPE; Fall arrrest harnessesDIN EN 362 PPE; ConnectorsDIN EN 363 Fall arrest systemsDIN EN 364 PPE; Test methodsDIN EN 365 PPE; General requirements about instructions for use, marking and packagingDIN EN 397 Industrial helmetsDIN EN 566 Climber equipment - slings - safety-related requirements and test methodsDIN EN 567 Climber equipment - rope clamps - safety-related requirements and test methodsDIN EN 795-2012 PPE; Anchorage devicesDIN CEN/TS 16415 PPE - Anchorage devices - Recommendations for a similar use of anchorage devices by several peopleDIN EN 813 PPE - Seat harnessesDIN EN 892 Climber equipment - dynamic mountain ropes - safety-related requirements and test methodsDIN EN 958 Climber equipment - fall absorber for usage on alpine climbs, safety-related requirements and test methodsDIN EN 959 Climber equipment - bolts - safety-related requirements and test methodsDIN EN 1496 PPE - Rescue lifting devicesDIN EN 1497 PPE - Rescue harnessesDIN EN 1808 Safety requirements to hanging personal admission devices - calculation, stability, structure testsDIN EN 1891 PPE for prevention of falls - kernmantle ropes with low elongationDIN EN 4426 Equipments for the maintenance of structural works - safety-related requirements to workplaces and routes - planning and executionDIN EN 12275 Climber equipment - karabiners - safety-related requirements and test methodsDIN EN 12277 Climber equipment - harnesses - safety-related requirements and test methodsEN 12841 PPE - Systems for rope-supported work - rope presettingsDIN 5290-1 Lightweight metal karabiner hook with union nut; Dimensions, requirements and testing
142
Courses and training
Carl Stahl Evita - Quality Training Worldwide
Carl Stahl Evita has been providing industry benchmarked essential training for a number of years and the Evitaname has become recognised throughout the world as ‘the standard’ when associated with wire rope and liftinggear inspection/examination.
Evita have developed an enviable reputation in all major industries; our consultants are among the most qualified and experienced in the world.
All courses are carried out in association with or in accordance with relevant professional trade associations, lead bodies and codes of practice and toNational, International, US or European standards.
Height Safety
Customers can be assured that their safety is always our number one priority and that all aspects of the training activities undertaken are fully insured.
Our professionally qualified instructors have extensive experience in height safety training and cover the whole of the UK and parts of mainland Europe.
Health and Safety
Are you and your staff aware of the current Health and Safety regulations?
Knowing and abiding by the Health and Safety regulations can save lives, time and money. These courses aim to make delegates increasingly moreaware of their responsibilities within a working environment.
www.carlstahlevita.co.uk
www.carlstahl-fallprotection.com
www.carlstahl-fallprotection.com 143
Courses and training
144 www.carlstahl-fallprotection.com
Trading Terms and Conditions
Scope:
All service agreements made with us are subject to our general terms of business as listed be-low. We do not recognise buyer’s terms that contradict or differ from our conditions of sale in-sofar as we have not expressly agreed to the same. Our terms of business are also valid for all future transactions with the buyer.
Conclusion of a Contract:
Any orders that are placed with us or any changes or additions to the contract or supple-mentary agreements must be made in writing. Orders placed by phone or in another form areonly considered to have been accepted following our confirmation, shipping or delivery of thegoods and issuance of the invoice.
Prices / Packaging Costs:
Prices are valid as at the time the order was placed. Insofar as no agreement to the contraryis made in the order confirmation our prices are valid per delivered unit, net, ex works ex-cluding packaging and including statutory value-added tax, which is stated separately in theinvoice.We will carry out shipping and packaging at our discretion. Any goods accepted by the ship-per, carrier or recipient without dispute are considered to have been packaged correctly.
Conditions of Payment / Compensation:
Our invoices are payable within 30 days of invoice date insofar as no other agreement hasbeen reached in the order confirmation. In the event of a delay in payment we are entitled tocharge interest on arrears at a rate 8% p.a. above the basic interest rate in accordance with§1 of the bank rate law, whereby we reserve the right to also assert the right to damages forarrears at a higher rate.The buyer may only offset charges against our claims for payment if his counterclaim is foundto be legally binding, undisputed or expressly recognised by us.
Delivery and Delivery Delays:
The start date for a delivery deadline or delivery period that has been confirmed by us pre-sumes the clarification of all technical and business-related questions. Our delivery obligations exist on condition of complete and correct availability of supplies tous, except if we are responsible for the non-delivery or delay.In the event of a delay in delivery the buyer is entitled to set a reasonable extension, whichmust be at least 2 weeks, in connection with the threat of refusal and may withdraw from thecontract following expiry of this extended deadline. In the event of unforeseeable events thatare beyond our control, such as strike, lockout, stoppage, delays in the supply or advancematerials, we do not accept responsibility if we are in arrears, irrespective of whether thesehindrances occur with us or with our suppliers.Claims for compensation due to the violation of service obligations or non service-relatedauxiliary obligations can only be made if we are guilty of intent or gross negligence and this isproven. We do not rule out our liability for damages resulting from injury to life, limb or healthas a proven consequence of negligent breach of duty on our part. For specially manufactured goods delivery quantities can vary by up to 10% plus or minus.This discrepancy will be taken into account in the invoice. For all delivered goods we reserve the right to allow industry-standard discrepancies indimensions or other technical specifications except where we have expressed assuredadherence to dimensions. We are entitled to make deliveries in reasonable partial quantities. In the event that the buyer delays his acceptance of the goods or if he violates othercooperation obligations we are entitled to claim for damage we have incurred, including anyadditional costs. In the event that the buyer delays his acceptance of the goods the risk of chance destructionor chance deterioration of the ordered goods is transferred to the buyer as of the time thebuyer delays the acceptance. Responsibility for transportation Once goods are transferred to the carrier transfer of risk isalso determined by the statutory regulations.
Claims for Defects / Liability:
In the event that the newly manufactured goods delivered by us are defective then the buyeris entitled to demand subsequent fulfilment. We reserve the right to choose between repair ofthe defect and subsequent delivery of non-defective goods. Further claims for withdrawal, reduction in costs or compensation are not possible except ifthe subsequent fulfilment is not successful. In this event the buyer can reduce the purchaseprice or, as long as the defect is not a construction service, withdraw from the contract if heso chooses. Claims for compensation based on accountable and provable intentional or gross-ly negligent breach of duty or claims for compensation that result from injury to life, limb orhealth are not excluded.
The buyer is not permitted to claim for withdrawal or compensation in the case of insignificant de-fects. We are not liable to the buyer for properties that he expects in accordance with public statementsby the seller or the manufacturer or their agents, particularly in advertisements, except if these state-ments explaining properties are expressly confirmed by us in writing. We do not guarantee any property or durability where this is not expressly agreed in writing. We do not accept liability for defective installation instructions from suppliers and other companiesexcept if grossly negligent breach of duty is proven against us in this regard. The statutory regulations are valid for required examination and notice. We expressly contradict thecommercial requirement for examination and notice by the buyer in accordance with § 377 HGB.The buyer must subject the goods to a comprehensive check of incoming goods.
Period of Limitation:
Insofar as no individual period of limitation has been agreed between the contractual parties theguarantee period for claims regarding defects in newly manufactured goods will be two years. Thisis not valid for the period of limitation for compensations claims following injury to life, limb or healthinsofar as this damage is a result of accountable and provable grossly negligent or intentional breachof duty on our part. This period of limitation is also not valid for claims for reimbursement for otherdamage caused by accountable grossly negligent or intentional breach of duty on our part. In the case of the sale of consumer goods the limitation period for claims regarding defects is twoyears for newly manufactured goods and one year for used goods.
Sale of Consumer Goods:
The regulations in figure 6, above, are not valid when based on the sale of consumer goods. How-ever claims for compensation are also not permissible in this case except if they are caused byintentional or grossly negligent breach of duty on our part or from injury to life, limb or healthresulting from intentional or grossly negligent breach of duty.
Reservation of Proprietary Rights:
We reserve the proprietary rights to the delivered goods until all payments from the delivery con-tract are paid. In the event of behaviour by the buyer that contradicts the contract, particularly pay-ment arrears, we are entitled to recover the delivered goods. This recuperation does not representwithdrawal from the contract insofar as we do not state this expressly in writing.If we have a continuous business relationship with the buyer then the reservation of proprietaryrights to the delivery goods also extends to delivery goods in all previously unpaid claims. The buyer is entitled to dispose of and process the delivered goods within orderly business process-es. He does, however, immediately transfer all claims he incurs resulting from the disposal to hiscustomers or third parties to us up to the total of all unpaid claims. The buyer retains his authori-zation to collect the claim himself; this does not affect our authority to collect claims. We are, how-ever, obliged not to report transfer in relation to customers or third parties as long as the buyer ful-fils his payment obligations to us and no application has been made for the initiation of process ofbankruptcy or settlement or pay- ments are otherwise stopped. The buyer is obliged to provide uswith all necessary informa- tion on the transferred claims on demand and to submit the corre-sponding documentation to us.In the event that the buyer processes or converts the goods delivered by us then we have partialproprietary rights to the new object in proportion to the value of our goods in comparison to thevalue of the other processed objects at the time of processing. The above regulations apply to thenew object created by this process in the same way.The buyer will also transfer to us those claims on third parties in accordance with the above regu-lations that are created by the combination of our delivered goods with a piece of land. Insofar as the value of all securities exceeds our claims by more than 20% because of the agreedreservation of proprietary rights, we are obliged to release securities to the excess value as we wishwhen requested by the buyer to do so.
Place of Fulfilment / Court of Jurisdiction / Choice of Law:
The place of fulfilment for all obligations resulting from the contractual relationship is Suessen and/orthe location of a affiliated company or branch insofar as no other regulation is contained in the or-der confirmation. If the buyer is a merchant in the German commercial register then we will agree Suessen and/or thelocation of an affiliated company or branch as the court of jurisdiction. We do, however, retain theright to taken the buyer to court at his general court of jurisdiction.The law of the Federal Republic of Germany is valid for our contractual relationships under exclu-sion of the UN Convention on the International Sale of Goods.
Partial Invalidity:
If any contractual regulation is invalid this will not affect the validity of the remaining regulations.
© Copyright by Carl Stahl GmbH Suessen (Germany), December 2006.
1.
2.
3.
4.
4.1
4.2
5.
5.1
5.2
5.3
5.4
5.5
5.6
5.75.8
5.9
5.10
6.
6.1
6.2
6.3
6.4
6.56.6
6.7
7.
7.1
7.2
8.
9.
9.1
9.2
9.3
9.4
9.5
9.6
10.
10.1
10.2
10.3
11.
www.carlstahl-fallprotection.com 145
Notes
146 www.carlstahl-fallprotection.com
Notes
www.carlstahl-fallprotection.com 147
International offices
Austria
China
Czech Republic
Denmark
Dubai/U.A.E.
Finland
Indonesia Poland
France
The Netherlands
Great Britain
Norway
Sweden
India
Switzerland
United States of America + Canada
Carl Stahl GmbHBahnhof 740A-6870 BezauTel.: (0043) (55 14) 30 105-0Fax: (0043) (55 14) 30 105-90E-Mail: [email protected]
Carl Stahl GmbHMaria-Theresia-Str. 9/3A-4600 WelsTel.: (0043) (72 42) 2 53 85Fax: (0043) (72 42) 2 53 71E-Mail: [email protected]
Carl Stahl Ningbo Co., Ltd.Tongtu Rd., Fang Qian, Xiao Gang,Beilun, Ningbo, P.R. China, 315803Tel.: 0086 (574) 8622 8100Fax: 0086 (574) 8622 8108E-Mail: [email protected]
Hangzhou Carl Stahl Import & Export Co., Ltd.5F-I, No. 173 Yugu Rd., Xihu District, Hangzhou, P.R. China, 310007Tel.: 0086 (571) 8993 6192Fax: 0086 (571) 8993 6167E-Mail: [email protected]
Carl Stahl & spol, s. r. o.Mikulovická 4CZ-190 17 Praha 9Tel.: (00420) 281 920 100Fax: (00420) 281 920 172E-Mail: [email protected]
Carl Stahl A/SVognmagervej 21DK-7000 FredericiaTel.: (0045) 762 402 34Fax: (0045) 762 403 45E-Mail: [email protected]
Carl Stahl A/SHørskætten 6 DDK-2630 TaastrupTel.: (0045) 762 402 34Fax: (0045) 594 422 93
Esbjerg KranserviceH.E. Bluhmesvej 1DK-6700 EsbjergTel.: (0045) 213 827 15E-Mail: [email protected]
Carl Stahl Lifting Equipment Industries LLCP. O. BOX 26607Dubai - U. A. E.Tel.: (00 971) 4-33334 94Fax: (00 971) 4-33334 89E-Mail: [email protected]
Carl Stahl Lifting Equipment Industries LLCP. O. BOX 92607Abu Dhabi - U. A. E.Tel.: (00 971) 2-55044 43Fax: (00 971) 2-55044 34E-Mail: [email protected]
Carl Stahl OyPL/Box 711Jonkankatu 2FIN-20360 Turku 36Tel.: (00 358) 2 275 00 60Fax: (00 358) 2 275 00 69E-Mail: [email protected]
Carl Stahl43, rue des TuileriesF-67460 SouffelweyersheimTel.: (0033) (3) 88 18 37 00Fax: (0033) (3) 88 20 51 96E-Mail: [email protected]
Carl Stahl Evita Ltd.Carl Stahl House, Farfield Park EstateS63 5DB Rotherham GBTel.: (0044) (0) 845 226 0819Fax: (0044) (0) 845 130 4499E-Mail: [email protected]
Carl Stahl Craftsman Enterprises Private Ltd.No. 15 LML ColonyAmmankulam RoadIND-Coimbatore - 641 037Tel.: (0091) 422 661 5100Fax: (0091) 422 221 1976E-Mail: [email protected]
Carl Stahl Craftsman Enterprises Private Ltd.No. 90 Broadway,Opposite to Canara Bank, George TownIND-Chennai - 600 108Tel.: (0091) 044-421 599 96Fax: (0091) 044-421 599 96E-Mail: [email protected]
PT. Rigspek PerkasaKomplek Kawasan Industri Kav No. 13Sekupang, Batam Indonesia29428Tel.: (0062) (0) 778 324 747Fax: (0062) (0) 778 321 388E-Mail: [email protected]
Carl Stahl Benelux B.V.Kleine Tocht 5NL-1507 CB ZaandamTel.: (0031) 75-6318536Fax: (0031) 75-6310968E-Mail: [email protected]
Carl Stahl ASGamle Leirdalsvei 12N-1081 OsloTel.: (0047) 22 79 20 00Fax: (0047) 22 79 20 10E-Mail: [email protected]
Carl Stahl ASPostboks 314 NesttunN-5853 BergenTel.: (0047) 55 92 63 60Fax: (0047) 55 92 63 70E-Mail: [email protected]
Carl Stahl ASLeirvikbakken 51N-9610 RypefjordTel.: (0047) 78 41 94 44E-Mail: [email protected]
Carl Stahl ASNorsea Basen Bygg 104N-4056 TanangerTel.: (0047) 51 94 49 10Fax: (0047) 51 94 49 11E-Mail: [email protected]
Carl Stahl ASFiskeriveien 6N-9750 HonningsvågTel.: (0047) 78 47 69 00Fax: (0047) 78 47 69 10E-Mail: [email protected]
Carl Stahl ASStrandgaten 78N-6512 KristiansundTel.: (0047) 70 30 15 00Fax: (0047) 70 30 15 10E-Mail: [email protected]
Carl Stahl Tech Service Sp. z o.o.ul. Spokojna 3PL 74-404 CychryTel.: (0048) (0)95-728 88 85Fax: (0048) (0)95-728 88 86E-Mail: [email protected]
Carl Stahl ABFrysvägen 3S-556 52 JönköpingTel.: (0046)-(0)36 36 16 40Fax: (0046)-(0)36 10 09 24E-Mail: [email protected]
Carl Stahl ABPontonjärsvägen 10S-96143 BodenTel.: (0046)-(0)36 36 16 40Fax: (0046)-(0)36 10 09 24E-Mail: [email protected]
Carl Stahl AGStachelhofstrasse 12CH-8854 SiebnenTel.: (0041)-(055) 450 50 00Fax: (0041)-(055) 450 50 05E-Mail: [email protected]
Carl Stahl American Lifting, LLC21825 Doral RoadWaukesha, WI 53186, USATel.: (001) 262-786-2710Fax: (001) 262-786-8510E-Mail: [email protected]
CS
/PS
A2015E
N/7
’ 0515/M
aure
r/P
rinte
d in G
erm
any/S
ub
ject
to t
echnic
al m
od
ific
atio
ns/R
ep
rinting
this
bro
chure
, in
clu
din
g in e
xtr
act
form
, is
pro
hib
ited
.