Special vacuum cups | Contents...>High holding force: Bernoulli vacuum cups can move up to 21.16 oz...

91www.fi pa.com

Special vacuum cups | Contents

Special vacuum cups at a glance ................................................................. 93

Special vacuum cups SX .................................................................................... 94

92 Phone 1 (800) 913 7002

Special vacuum cups | Notes

Notes:

93www.fi pa.com

Special vacuum cups | At a glance

FIPA special vacuum cups SX

Temperature-resistant felt coated vacuum cups – Series SX-F> Nearly mark-free special vacuum cup for the highest temperature requirements, such as in the

glass industry> Temperature resistant up to 1022 °F (SI)> Special felt pad permanently attached to elastomer carrier by vulcanization> For more information, see page 94

Vacuum cups with sponge pad – Series SX-SH> Flat vacuum cup with contact surface of special silicone sponge> Very low-marking on polished surfaces> Flat sealing prevents leakage on rough, porous surfaces

> For more information, see page 96

Bernoulli vacuum cups – Series SX-B > Low-contact and torsion-resistant transport of sensitive products> No ejector, requires compressed air only> High holding force: Bernoulli vacuum cups can move up to 21.16 oz of mass> Perfectly suited for porous products thanks to high volume fl ow at low vacuum level


Hand grippers – SX-G> Sturdy gripper for the manual handling of fl at, smooth products> No vacuum source required> Simplicity of handling – release of the product via a release button


Sealing profi les> Available by the meter for manufacturing individual vacuum suction plates> Ideal adaptation to specifi c product requirements

> More information from page 101

94 Phone 1 (800) 913 7002

Special vacuum cups | Special vacuum cups SXTemperature-resistant, felt-coated vacuum cups – Series SX-F

* When ordering please add the appropriate material code to the item no. You will find it in the foldout.

Temperature-resistant, felt-coated vacuum cups – Series SX-F

Product Description Advantage

Almost mark-free special vacuum cup for high temperature requirements, e.g. in the glass industry. Special felt pad vulcanized to elastomer carrier. Migration of silicone particles is prevented by vapour-deposited aluminum layer. Connection up to Ø 70 mm by means of plug nipple, from Ø 90 mm with bolted bracket plate.

> Temperature resistant up to 932 °F > Almost mark-free > Cost-effective replacement of worn seals

Note

There is a small leak at first use resulting from the texture of the special felt, but after a brief period of use this will be significantly reduced by the thickening of the felt layer.

Technical Data

Item no.

Model / Lip dimensions

Weight [oz] Max. operating temperature [°F]

Material / color Number of bellows

26.025.009._* SX-F-25 2 0.21 932 SI (tr/ge) --

26.037.010._* SX-F-40 3 0.35 932 SI (tr/ge) --

26.070.011._* SX-F-70 7 0.85 932 SI (tr/ge) --

26.090.001._* SX-F-90 17 2.82 932 (SI), 662 (FKM) SI (tr/ge), FKM (sw/ge) 1.5

26.120.002._* SX-F-120 18 4.94 662 FKM (sw/ge) 1.5

26.160.003._* SX-F-160 18 7.23 662 FKM (sw/ge) 1.5

Accessories

Item no.

Suitable fittings

G1/8-male G1/8-female G1/4-male G1/4-female G3/8-female

26.025.009._* 270.132 (p. 455) 270.114 (p. 460) 270.208 (p. 464) 270.178 (p. 470) --

26.037.010._* 270.132 (p. 455) 270.114 (p. 460) 270.208 (p. 464) 270.178 (p. 470) --

26.070.011._* 270.132 (p. 455) 270.114 (p. 460) 270.208 (p. 464) 270.178 (p. 470) --

26.090.001._* -- -- -- -- 270.400 (p. 475)

26.120.002._* -- -- -- -- 270.402 (p. 475)

26.160.003._* -- -- -- -- 270.404 (p. 475)

MINIMUM MARKING

95www.fi pa.com

Special vacuum cups | Special vacuum cups SXTemperature-resistant, felt-coated vacuum cups – Series SX-F


Dimensions

d2

d1

d5H

h3

D

a

b

d1

H

h3

D

d5

a

Ø 24 | 37 | 67 mm Ø 89 | 120 | 150 mm

a = Felt pads b = For silicone vacuum cups with silicone membranes: evaporated aluminum layer

Item no.

Ø D [mm] Ø d1 [mm] Ø d2 [mm] Ø d5 [mm] H [mm] h3 [mm]

26.025.009._* 24 16 8 29 36 3.3

26.037.010._* 37 18 8 42 38 6.5

26.070.011._* 67 21 8 71 36 8

26.090.001._* 89 87 -- 99 38 10.5

26.120.002._* 120 108 -- 129 45 17.5

26.160.003._* 150 130 -- 161 48 16.5

96 Phone 1 (800) 913 7002


Special vacuum cups | Special vacuum cups SXVacuum cups with sponge pad – Series SX-SH

Vacuum cups with sponge pad – Series SX-SH

Product Description Advantage

Low-marking flat vacuum cup with contact surface of special silicone sponge. Soft sponge coating compensates for unevenness. Connection via an interlocking snap-in plug nipple.

> Very low-marking on polished surfaces > Flat sealing prevents leakage > Cost-effective replacement of worn seals

Technical Data

Item no.

Model / Lip dimensions

Max. operating temperature [°F] Material / color

104.008.082._* SX-SH-8 0.5 392 SI (bl/r)

104.009.083._* SX-SH-9 0.5 392 SI (bl/r)

104.013.084._* SX-SH-13 0.5 392 SI (bl/r)

104.015.085._* SX-SH-15 1 392 SI (bl/r)

104.020.086._* SX-SH-20 1.5 392 SI (bl/r)

104.030.087._* SX-SH-30 1.5 392 SI (bl/r)

104.040.088._* SX-SH-40 2.5 392 SI (bl/r)

Accessories

Item no.

Suitable fittings Suitable spring plunger

M5-maleG1/8-male

G1/8-female

G1/4-male

G1/4-female Sp

rin

g p

lun

ger

Spri

ng

plu

ng

er

Spri

ng

plu

ng

er

Spri

ng

plu

ng

er

104.008.082._*270.200 (p. 449)

270.064 (p. 457)

270.065 (p. 461)

-- -- -- --50.018 (p. 494)

8.550.141 (p. 496)

10 -- --

104.009.083._*270.200 (p. 449)

270.064 (p. 457)

270.065 (p. 461)

-- -- -- --50.018 (p. 494)

8.550.141 (p. 496)

10 -- --

104.013.084._*270.200 (p. 449)

270.064 (p. 457)

270.065 (p. 461)

-- -- -- --50.018 (p. 494)

8.550.141 (p. 496)

10 -- --

104.015.085._* --270.012 (p. 459)

270.020 (p. 461)

270.034 (p. 466)

270.038 (p. 471)

50.005 (p. 496)

550.148 (p. 496)

--50.145 (p. 496)

1050.146 (p. 496)

30

104.020.086._* --270.012 (p. 459)

270.020 (p. 461)

270.034 (p. 466)

270.038 (p. 471)

50.005 (p. 496),

550.148 (p. 496)

--50.145 (p. 496)

1050.146 (p. 496)

30

104.030.087._* --270.012 (p. 459)

270.020 (p. 461)

270.034 (p. 466)

270.038 (p. 471)

50.005 (p. 496)

550.148 (p. 496)

--50.145 (p. 496)

1050.146 (p. 496)

30

104.040.088._* --270.012 (p. 459)

270.020 (p. 461)

270.034 (p. 466)

270.038 (p. 471)

50.005 (p. 496)

550.148 (p. 496)

--50.145 (p. 496)

1050.146 (p. 496)

30

97www.fi pa.com

Special vacuum cups | Special vacuum cups SXVacuum cups with sponge pad – Series SX-SH


Dimensions

d2

d3

d1

d4

DH

h1h2

a

d2

d3

d1

D

H

h1h2

d4

a

Ø 8 | 9 | 13 | 15 | 20 mm Ø 30 | 40 mm

a = Sponge layer of special silicone (minimum marking)

Item no.

Ø D [mm] Ø d1 [mm] Ø d2 [mm] Ø d3 [mm] Ø d4 [mm] H [mm] h1 [mm] h2 [mm]

104.008.082._* 8 10.5 5 7 3 14 3 5

104.009.083._* 9 10.5 5 7 3 14 3 5

104.013.084._* 13 10.5 5 7 3 14 3 5

104.015.085._* 15 15.5 7.5 11.5 4 17.5 6 8

104.020.086._* 20 15.5 7.5 11.5 4 17.5 6 8

104.030.087._* 30 15.5 7.5 11.5 4 17.5 6 8

104.040.088._* 40 15.5 7.5 11.5 4 17.5 6 8

98 Phone 1 (800) 913 7002

Special vacuum cups | Special vacuum cups SXBernoulli vacuum cups – Series SX-B

Bernoulli vacuum cups – Series SX-BNon-contact vacuum suction grippers

> Integrated vacuum generation on the Bernoulli principle > No ejector, requires compressed air only > Non-contact, deformation-resistant transport of thin and sensitive products > High holding force: Bernoulli vacuum cups can grip up to to 21.16 oz of mass > Perfectly suited for porous products thanks to high volume flow at low vacuum level

> Easy to install, system flexibly expandable through lateral compressed air inlets > Long life cycle due to maintenance-free operation

Technical Data

Item no.

Model Operating pressure [psi]

Holding force at 72.5 psi [N]

Air consumption at 72.5 psi [scfm]

Ambient air temperature [°F]

Medium Oil content of compressed air [mg/m³]

Suitable accessories

65.510 SX-B-20 14.5 - 101.5 0.9 3.5 41 - 140 Compressed air 0Pads NBR 78.509 Pads SI 78.510

65.520 SX-B-30 14.5 - 101.5 1.3 3.5 41 - 140 Compressed air 0Pads NBR 78.509 Pads SI 78.510

65.530 SX-B-40 14.5 - 101.5 2 3.9 41 - 140 Compressed air 0Pads NBR 78.511 Pads SI 78.512

65.540 SX-B-60 14.5 - 101.5 6 7.4 41 - 140 Compressed air 0Pads NBR 78.511 Pads SI 78.512

Diagrams

> Holding force as a function of operating pressure > Air consumption depending on operating pressure

Rete

ntio

n fo

rce

[N]

0 14.5 290

Operating pressure [psi]43.5 58 72,5 87

8

9

6

7

4

5

2

3

1

10

101.5

65.540

65.530

65.520 65.510

Air

con

sum

ptio

n [

l/m

in]

0 14.5 290

Operating pressure [psi]43.5 58 72.5 87

250

200

100

150

50

300

101.5

65.540

65.510 | 65.520

65.530

99www.fi pa.com

Special vacuum cups | Special vacuum cups SXBernoulli vacuum cups – Series SX-B

Dimensions

B C

26

14 (1)

M5 (12,1) 3xM3

M5

Ø10

15

120°

120°Ø

7

Ø20

A D

65.510

17

6,5 (1)

Ø 7

Ø 3

0

2xM5

22

45º 45º

4xM4 M5

A

B C D

65.520

3-Ø6

33,4

120º

120º

17

6,5 (1)

Ø 4

0

2xM5 4xM4

45º 45º

32

M5

A

B C D

65.530

3-Ø6

45º

120º

120º

53,4

17

7 (1)

2xM5

45º 45º

45

M54xM4

A

B C D

Ø 60

65.540

A = Silicone rubber pads (with 65.530 and 65.540 the pads can be removed in case of contact-less application)

B = Pneumatic connection C = Depth 5 mm D = Pneumatic connection

100 Phone 1 (800) 913 7002

Special vacuum cups | Special vacuum cups SXHand grippers – SX-G

Hand grippers – SX-G

Product Description

Sturdy gripper for the manual handling of flat, smooth products. No vacuum source required. Simple handling. Release of the product via a release button.

Technical Data

Item no.

Model / Lip dimensions Tearing force [lbs] Material / color

64.001._* SX-G-55 30.9 Vinyl (sw)

64.002._* SX-G-65 41.9 Vinyl (sw)

64.003._* SX-G-75 48.5 Vinyl (sw)

64.004._* SX-G-125 55.1 NBR (sw)

64.005._* SX-G-130 61.7 Vinyl (sw)

Dimensions

D

H

D

HØ 55 | 63 mm Ø 78 | 128 | 131 mm

Item no.

Ø D [mm] H [mm]

64.001._* 55 43

64.002._* 63 45

64.003._* 78 42

64.004._* 128 51

64.005._* 131 66

101www.fi pa.com

Special vacuum cups | Special vacuum cups SX

Sealing cord, round – Series SX-DLong-length version for production of individual vacuum suction plates

E Ø D

Technical Data Dimensions

Item no. Mod

el /

Li

p d

imen

sion

s

Rec

omm

end

ed

inst

alla

tion

dep

th

E [m

m]

Mat

eria

l / c

olor

Ø D

[m

m]

231.05.026.12 SX-D-5 3.7 CR (sw) 5

231.06.011.12 SX-D-6 4.5 CR (sw) 6

231.08.012.12 SX-D-8 6 CR (sw) 8

231.10.013.12 SX-D-10 7 CR (sw) 10

231.12.014.12 SX-D-12 8.5 CR (sw) 12

Ordering notes

Minimum standard length: 1000 mm

Sealing cord, rectangular – Series SX-DLong-length version for production of individual vacuum suction plates

H

B

Technical Data Dimensions

Item no. Mod

el /

Lip

d

imen

sion

s

Mat

eria

l / c

olor

B [

mm

]

H [

mm

]

231.10x6.006.12 SX-D-10x6 CR (gr) 6 10

231.20x10.027.12 SX-D-20x10 EPDM (sw) 10 20

Ordering notes


Sealing cord, profiled – Series SX-DLong-length version for production of individual vacuum suction plates

10

17

7

Technical Data

Item no. Mat

eria

l / c

olor

231.17x10.025.12 NR (gr)

Ordering notes


102 Phone 1 (800) 913 7002



10

17

7

Technical Data

Item no. Mat

eria

l / c

olor

231.14x8x2.009.12 Sponge rubber (gr)

Ordering notes



4

3

4

5,53,

5

1,2

Technical Data

Item no. Mat

eria

l / c

olor

231.5,5x4.015.2tr SI (tr)

Ordering notes

1 packaging unit = 25 m


7,5

10,5

6

1,5

1,1,5

Technical Data

Item no. Mat

eria

l / c

olor

231.10,5x7,5.001.12 EPDM (sw) - 80/30° Shore

Ordering notes


103www.fi pa.com



10,5

1,5

1,5

7,5

6

Technical Data

Item no. Mat

eria

l / c

olor

231.10,5x7,5.002.12 EPDM (sw) - 80/30° Shore

Ordering notes



1512

3

3

26,5

Technical Data

Item no. Mat

eria

l / c

olor

231.26,5x15.003.12 EPDM (sw) - 80/30° Shore

Ordering notes


104 Phone 1 (800) 913 7002

Special vacuum cups | Notes

Notes:

105www.fi pa.com

Vacuum gripping systems | Contents

Vacuum gripping systems at a glance ...................................................... 106

Customized vacuum grippers ........................................................................ 107

Standard vacuum grippers .............................................................................. 108

106 Phone 1 (800) 913 7002

Vacuum gripping systems | Vacuum gripping systems at a glance

Advantages / Benefits

Vacuum grippers:> Finely graded series for the handling of dense or porous products> Integrated vacuum generation > Energy saving function as intelligent valve technology closes unused suction openings> Contamination-proof design ensures high availability and process safety> Suitable for fast cycle times> Simple installation and operation> Wide range of standard products as well as rapid implementation of customized solutions

Foam rubber mats:> Long service life of the foam mats thanks to very high resistance to wear and high aging stability> Wide range of foams for quick adaptation to different products> Fast and non-destructive exchange of vacuum mats ensures high productivity with minimum down times

Application

> Automated handling processes: Palettizing, depalletizing, separation and sorting> Safe operation Independent of material properties such as surface, porosity, size and weight> Undefi ned take-up positions> High gripping fl exibility: one piece or entire product layer> Under harsh conditions (dust, humidity, ...)

Industry examples:> Packaging technology, timber, chemicals and building materials

Construction

> Integrated vacuum generation with ejectors, thereby ideally adaptable to the prevailing operating parameters> External vacuum generation if required (side channel blowers for porous products: high volume fl ow)> Aluminum plate for the take-up of the ejectors and vacuum meter> Integrated bore-holes or patented valve system> Vacuum mats, ideally matched with the workpiece to be handled> Bore-hole diameter and distance between each hole can be adapted to the application TL version: without valve technology (with flow resistors) TC version: with valve technology

107www.fi pa.com

Vacuum gripping systems | Customized vacuum grippers

Advantages / Benefits

Customized vacuum grippers:> Freely confi gurable, highly effi cient ejector modules for fl exible and economic adaptation to the vacuum requirements of the

goods to be handled> Wide range of side channel blowers as an energy-saving alternative, especially when handling materials with high porosity and

correspondingly high air demand> Implementation of customized gripper sizes and functional extensions, such as release and/or vacuum control> Flexible adjustment of the valve system for maximum process safety and reliability as well as long service life > Design and delivery of individual gripper modules up to complete gripper systems for attachment to robots or to portal or crane

systems

Customized vacuum mats:> Vacuum mats precisely adjustable to application thanks to variety of materials > Highly wear- and aging-resistant> Quick, non-destructive and residue-free replacement, when needed, of vacuum mats without tools or pre-handling> Cost-effective initial investment as well as reduced operating costs> Vacuum mats are perfectly matched to the FIPA range of vacuum grippers> Fast and economic realization of individual sizes, qualities and hole patterns, also as an alternative fi t for major gripper

systems on the market

108 Phone 1 (800) 913 7002

Vacuum gripping systems | Vacuum grippersVacuum grippers 70x70

Vacuum grippers 70x70

Product Description

> Use in virtually all automated handling processes: Palletising, de-palletising, separating, sorting > Integrated vacuum generation > TL Design: with flow resistors > Contamination-proof design ensures high availability and process safety > Suitable for fast cycle times > Simple installation and operation > Fast and easy replacement of the foam mats

Technical Data

Item no. Air

con

sum

ptio

n at

87

psi

[sc

fm]

Suct

ion

pow

er

agai

nst

at

mos

ph

ere

[scf

m]

Fin

al v

acu

um

[%]

Wei

ght

[lb

s]

TL70x70-3010 0.9 1.6 60 0.7

TL70x70-5010 3.7 6.9 60 1.8

Diagrams

> Holding force at 87 psi depends on the vacuum when working with different permeable materials (values at 100% coverage of the vacuum gripper / minimum 80% coverage recommended)

Gri

ppin

g fo

rce

at 8

7 ps

i [N

]

Vacuum [%]0

040 60

60

50

40

30

20

10

20

semi-permeable,e.g. wood

porous, e.g. carton

semi-perme

non-permable, e.g. steel

ood

109www.fi pa.com


Dimensions

1414

77,2

7070

42,

2

87,520

20

Ø 10

a

b

c

d

a = Fixing with M4 screws b = 6 mm quick-fitting c = 20 mm foam rubber mat d = 9 boreholes

110 Phone 1 (800) 913 7002



Product Description

> Use in virtually all automated handling processes: Palletising, de-palletising, separating, sorting > Integrated vacuum generation > TL Design: with flow resistors > Contamination-proof design ensures high availability and process safety > Suitable for fast cycle times > Simple installation and operation > Fast and easy replacement of the foam mats

Technical Data

Item no. Air

con

sum

ptio

n at

87

psi

[sc

fm]

Suct

ion

pow

er

agai

nst

at

mos

ph

ere

[scf

m]

Fin

al v

acu

um

[%]

Wei

ght

[lb

s]

Suit

able

foa

m m

at

TL120x120-P20 8.4 14.2 60 3.1 PPF120.120-P20

Diagrams

> Holding force at 87 psi depends on the vacuum when working with different permeable materials (values at 100% coverage of the vacuum gripper / minimum 80% coverage recommended)

Gri

ppin

g fo

rce

at 8

7 ps

i [N

]

Vacuum [%]0

040 60

250

200

150

100

50

20

porous, e.g. cartonsemi-permeable,e.g. wood


111www.fi pa.com


Dimensions

120

110

48

120

48

20

20

Ø 10

171

b

a

c

d


112 Phone 1 (800) 913 7002



Product Description

> Use in virtually all automated handling processes: Palletising, de-palletising, separating, sorting > Integrated vacuum generation > TL Design: with flow resistor > TC Design: with valve technology allows unoccupied suction openings to be sealed, thereby saving energy > Contamination-proof design ensures high availability and process safety > Suitable for fast cycle times > Simple installation and operation > Fast and easy replacement of the foam mats

Technical Data

Item no. Air

con

sum

ptio

n at

87

psi

[sc

fm]

Suct

ion

pow

er

agai

nst

at

mos

ph

ere

[scf

m]

Fin

al v

acu

um

[%]

Wei

ght

[lb

s]

Suit

able

foa

m m

at

TL120x230-P20 3.7 6.9 60 3.4 PPF120.230-P20

TL120x230-P40 3.7 6.9 60 3.4 PPF120.230-P40

TC120x230-P20 3.7 12.6 60 5.1 PPF120.230-P20

TC120x230-P40 3.7 6.9 60 5.1 PPF120.230-P40

Diagrams

> Holding force at 87 psi depending on the vacuum when working with different permeable materials (values at 100% coverage of the vacuum gripper / 80% coverage – for TL design – is recommended)

Gri

ppin

g fo

rce

at 8

7 ps

i [N

]

Vacuum [%]0

040 60

450

300

350

400

250

200

100

50

150

20



porous, e.g. carton

Gri

ppin

g fo

rce

at 8

7 ps

i [N

]

Vacuum [%]0

040 60

450

300

350

400

250

200

100

50

150

20



porous, e.g. carton

TL120x230-P20 | TL120x230-P40 TC120x230-P20 | TC120x230-P40

113www.fi pa.com


Dimensions

230

93T

C77

TL

120

260

46

65

92

20

20

Ø 10

40

40

Ø20

b

a

c

118

d

e

P20 P40


e = 15 boreholes

114 Phone 1 (800) 913 7002



Product Description

> Use in virtually all automated handling processes: Palletising, de-palletising, separating, sorting > Integrated vacuum generation > TL Design: with flow resistor > TC Design: with valve technology, allows unoccupied suction openings to be sealed, thereby saving energy > Contamination-proof design ensures high availability and process safety > Suitable for fast cycle times > Simple installation and operation > Fast and easy replacement of the foam mats

Technical Data

Item no. Air

con

sum

ptio

n at

87

psi

[sc

fm]

Suct

ion

pow

er

agai

nst

at

mos

ph

ere

[scf

m]

Fin

al v

acu

um

[%]

Wei

ght

[lb

s]

Suit

able

foa

m m

at

TL120x400-P20 7.4 13.9 60 5.5 PPF120.400-P20

TC120x400-P20 7.4 12.6 60 7.8 PPF120.400-P20

TL120x400-P40 3.7 6.9 60 5.5 PPF120.400-P40

TC120x400-P40 3.7 12.6 60 7.8 PPF120.400-P40

Diagrams


Gri

ppin

g fo

rce

at 8

7 ps

i [N

]

Vacuum [%]0

040 60

900

800

700

600

500

400

300

200

100

20


porous, e.g. carton


Gri

ppin

g fo

rce

at 8

7 ps

i [N

]

Vacuum [%]0

040 60

900

800

700

600

500

400

300

200

100

20


porous, e.g. carton



115www.fi pa.com


Dimensions

4 00 120

93

TC

77

TL

100

7565

20

20

Ø10

4 0

40

Ø20

c

ba

de

P20 P40


e = 30 boreholes

116 Phone 1 (800) 913 7002



Product Description

> Use in virtually all automated handling processes: Palletising, de-palletising, separating, sorting > Integrated vacuum generation > TL Design: with a flow resistor > TC Design: with valve technology, allows unoccupied suction openings to be sealed, thereby saving energy > Contamination-proof design ensures high availability and process safety > Suitable for fast cycle times > Simple installation and operation > Fast and easy replacement of the foam mats

Technical Data

Item no. Air

con

sum

ptio

n at

87

psi

[sc

fm]

Suct

ion

pow

er

agai

nst

at

mos

ph

ere

[scf

m]

Fin

al v

acu

um

[%]

Wei

ght

[lb

s]

Suit

able

foa

m m

at

TL200x400-P20 14.7 27.7 60 8.6 PPF200.400-P20

TC200x400-P20 14.7 0.1 60 13.6 PPF200.400-P20

TL200x400-P40 7.4 27.7 60 8.6 PPF200.400-P40

TC200x400-P40 7.4 25.2 60 13.6 PPF200.400-P40

Diagrams


Gri

ppin

g fo

rce

at 8

7 ps

i [N

]

Vacuum [%]0

040 60

1600

1400

1200

1000

800

600

400

200

20


porous, e.g. carton


Gri

ppin

g fo

rce

at 8

7 ps

i [N

]

Vacuum [%]0

040 60

1600

1400

1200

1000

800

600

400

200

20


porous, e.g. carton



117www.fi pa.com


Dimensions

20

20

Ø10

4 0

40

Ø2

0

4 00 200

93

TC

77

TL

100

8075162,5

c

b

a

de

P20 P40


e = 50 boreholes

118 Phone 1 (800) 913 7002



Product Description

> Use in virtually all automated handling processes: Palletising, de-palletising, separating, sorting > Integrated vacuum generation > TL Design: with a flow resistor > TC Design: with valve technology, allows unoccupied suction openings to be sealed, thereby saving energy > Contamination-proof design ensures high availability and process safety > Suitable for fast cycle times > Simple installation and operation > Fast and easy replacement of the foam mats

Technical Data

Item no. Air

con

sum

ptio

n at

87

psi

[sc

fm]

Suct

ion

pow

er

agai

nst

at

mos

ph

ere

[scf

m]

Fin

al v

acu

um

[%]

Wei

ght

[lb

s]

Suit

able

foa

m m

at

TL160x600-P20 14.7 27.7 60 10.1 PPF160.600-P20

TC160x600-P20 14.7 0.1 60 15.9 PPF160.600-P20

TL160x600-P40 7.4 13.9 60 10.1 PPF160.600-P40

TC160x600-P40 7.4 25.2 60 15.9 PPF160.600-P40

Diagrams


Gri

ppin

g fo

rce

at 8

7 ps

i [N

]

Vacuum [%]0

040 60

1800

1600

1400

1200

1000

800

600

400

200

20


porous, e.g. carton


Gri

ppin

g fo

rce

at 8

7 ps

i [N

]

Vacuum [%]0

040 60

1800

1600

1400

1200

1000

800

600

400

200

20


porous, e.g. carton



119www.fi pa.com


Dimensions

20

20

Ø10

4 0

40

Ø20

600 160

93

TC

77

TL

100

6575262,5

c

b

a

de

P20 P40


e = 60 boreholes

120 Phone 1 (800) 913 7002

Vacuum grippers | Notes

Notes:

Special vacuum cups | Contents...>High holding force: Bernoulli vacuum cups can move up to 21.16 oz...

Documents

Transcript of Special vacuum cups | Contents...>High holding force: Bernoulli vacuum cups can move up to 21.16 oz...