Specalog for M313D Wheel Excavator, AEHQ5753-01 · 2010-04-25 · Wheel Excavator boom, stick and...

®®

EngineEngine Model Cat ® C4.4 ACERT™Net Power 95 kW 127 hp

• Maximum power at 2,000 rpmWeights

Operating Weight 14 000 kg (30,865 lb) to 16 200 kg (35,715 lb)

TransmissionMaximum Travel Speed 37 km/h 23 mph

M313DWheel Excavator

2

M313D Wheel ExcavatorThe D Series incorporates innovations for improved performance and versatility.

Increased lifting capacity, improved cycletimes and ease of operation lead to increasedproductivity and lower operating costs.

Serviceability

For increased safety, all dailymaintenance points are accessible fromground level. A centralized greasingsystem allows lubrication of criticalpoints. pg. 12

✔

Versatility

Caterpillar offers a wide variety offactory-installed attachments thatenhance performance and job sitemanagement. pg. 11

Operator Comfort

The totally redesigned operator stationmaximizes comfort while increasingsafety. The available auto-weightadjusted air-suspension seat with heatedand cooled ventilated cushions improvesoperator comfort. Safety is enhanced bythe new color monitor and optionalrear-mounted camera. pg. 6

✔

Hydraulics

The state of the art load-sensinghydraulic system combined with aseparate dedicated swing pump providesfast cycle times, increased lift capacityand high bucket and stick forces.This combination maximizes yourproductivity in any job. pg. 5

✔

Engine

Caterpillar’s exclusive ACERT™Technology surpasses the moststringent emissions requirements in theconstruction industry. The U.S. EPATier 3 compliant C4.4 offers increasedperformance and reliability whilereducing fuel consumption and soundlevels. pg. 4

✔

✔ New Feature

3

Complete Customer Support

Your Cat® dealer offers a wide rangeof services that can be set up under acustomer agreement when you purchaseyour equipment. Your dealer will helpyou choose a plan that can covereverything from machine and attachmentselection to replacement. pg. 15

Environmentally Responsible Design

Helping to protect our environment, theengine has low operator and spectatorsound levels, longer filter change intervalsand is more fuel-efficient. pg. 14

✔

Work Tools

The combination of Caterpillar machinesand work tools provide a total solutionfor any application. A variety of couplers,buckets, hammers, grapples, shears,multi-processors to name a few areoffered to optimize your machine’sversatility. pg. 10

Booms and Sticks

Caterpillar® excavator booms and sticksare built for performance and longservice life. The box section designprovides the strength needed for eventhe toughest applications. Multiple boomand stick options allow you to pick thebest match for your job. pg. 9

✔

Undercarriage

Various undercarriage configurationsare available to provide the best solutionfor your work environment; theseconfigurations can include a dozerblade and/or outriggers dependingon your needs. pg. 8

Powerful Performance. The Cat® C4.4with ACERT™ Technology introducesa series of evolutionary, incrementalimprovements that provide breakthroughengine performance. The buildingblocks of ACERT Technology are fueldelivery, air management and electroniccontrol. ACERT Technology optimizesengine performance while meetingU.S. EPA Tier 3 engine emissionregulations. The Cat C4.4 engine inthe M313D delivers a maximum grosspower of 102 kW (136 hp) at a ratedspeed of 2,000 rpm. This is 12% morehorsepower as compared to the 3054Ein the M313C.

Low Fuel Consumption. The C4.4 iselectronically controlled and uses thenew Cat Common Rail Fuel System andfuel pump. This combination providesoutstanding fuel consumption duringboth production and travel. When thesystem recognizes roading applicationthe engine adjusts to the most efficientsystem operating point to save fuelwithout compromising road performance.

Low Noise, Low Vibration. The Cat C4.4design improves operator comfort byreducing sound and vibration.

Cooling System. An electronicallycontrolled, hydraulic motor drives avariable speed on-demand fan for enginecoolant and hydraulic oil. The optimumfan speed is determined based on coolantand hydraulic oil temperature resultingin reduced fuel consumption and lowersound levels. The electronic enginecontrol continuously compensatesfor the varying fan load, providingconsistent net power, regardless ofoperating conditions.

One-Touch Low Idle Control.The two-stage, one-touch AutomaticEngine Speed Control reduces enginespeed if no operation is performed,maximizing fuel efficiency andreducing sound levels.

Waste Handling Package. The WasteHandling Package has been specificallydeveloped for Cat Wheel Excavatorsworking in waste transfer stations orother extremely dusty applications.This option features the following:

• An automatic, hydraulic reversiblefan that reverses airflow after aset interval, manually adjustablebetween 5 and 60 minutes with aswitch located inside the cab.

• A special dense wire mesh coolingsystem hood further reduces radiatorclogging.

• Two cyclone filters provide cleanfiltered air to the engine compartment,air cleaner, aftercooler and airconditioner condenser.

4

EngineBuilt for power, reliability, low maintenance, excellent fuel economy and low emissions.

Dedicated Swing Pump. A dedicatedvariable displacement piston pump andfixed displacement piston motor powerthe swing mechanism. This closedhydraulic circuit maximizes swingperformance without reducing power tothe other hydraulic functions, resultingin smoother combined movements.

Heavy Lift Mode. This mode maximizeslifting performance by boosting thelifting capability of the excavator by7 percent. Heavy loads can be easilymoved in the full working range of themachine, maintaining excellent stability.

Adjustable Hydraulic Sensitivity.This function allows the operator toadjust the aggressiveness of the machineaccording to the application. For precisionwork, one of four different levels ofaggressiveness can be pre-selected.

Proportional Auxiliary Hydraulics.Versatility of the hydraulic system canbe expanded to utilize a wide varietyof hydraulic work tools using multiplevalve options.

• The Multi-Combined Valve is thecore of the Tool Control System,allowing the operator to select up toten pre-programmed work tools fromthe monitor. These preset hydraulicparameters support either one-wayor two-way flow. The joystick slidingswitches allow modulated control ofthe work tool.

• A dedicated Hammer circuit is thebest option for tools that requireone-way flow only, and do notrequire the flexibility providedby the Multi-Combined Valve.

• The Medium Pressure FunctionValve provides proportional flowthat is ideal for tilting buckets orrotating tools.

• A new feature for the D-Series WheelExcavators is the optional secondHigh Pressure valve. In combinationwith the Multi-Combined Valve,it provides the possibility to operatethe machine with work tools or inapplications requiring a third auxiliaryhydraulic function, such as a tilting/rotating quick coupler.

Stick Regeneration Circuit. The stickregeneration circuit increases efficiencyand helps increase controllability forhigher productivity and loweroperating costs.

Quick Coupler. The machine can beoptionally equipped with a dedicatedhydraulic circuit to operate hydraulicquick couplers.

Hydraulic Snubbers. Caterpillar integratesits cylinder snubber technology into allWheel Excavator boom, stick and bucketcylinders. These snubbers help cushionshocks, reduce sound and increasecylinder life.

Caterpillar XT™-6 ES Hoses. Premiumquality rubber, precision 4-ply wirereinforcement and exclusive reusablecouplings are all unique features thatdeliver top performance and long life.

5

HydraulicsFast cycle times, increased lift capacity, and high bucket and stick forces combineto maximize your productivity in any job.

6

The interior layout maximizes operator space, provides exceptional comfort and reducesoperator fatigue.

Operator Comfort

Interior Operator Station. Improvedvisibility and ergonomics are some ofthe many new features of the D-SeriesWheel Excavators. The pressurizedoperator station provides maximumspace and is designed for simplicity andfunctionality. Frequently used switchesare centralized and are situated on theright-hand switch console. The left-handseat console controls dozer blade and/oroutriggers, and is tiltable for easy accessto the cab. The fully automatic climatecontrol adjusts temperature and air flowfor exceptional operator comfort.Other comfort features include a cigarlighter, ashtray, drink/bottle holder,magazine rack and integrated mobilephone holder.

Cab Construction. The exterior designuses thick steel tubing along the bottomperimeter of the cab, improving theresistance to fatigue and vibration.This design allows the falling objectguards to be bolted directly to the cab.The cab shell is attached to the framewith rubber mounts that limit vibrationand sound transmitted from the frame,substantially reducing interiornoise levels.

Viewing Area. To maximize visibility,all glass is affixed directly to the cab,eliminating the use of window frames.Choice of fixed or easy-to-open splitfront windshield meets operatorpreference and application conditions.

• The 50/50 split front windshieldallows both upper and lower portionsto be stored in an overhead positionand features the one-touch actionrelease system.

• The 70/30 split front windshieldstores the upper portion above theoperator. The lower front windshieldfeatures a rounded design to maximizedownward visibility and improveswiper coverage. Also features theone-touch action release system.

• The fixed front windshield comeswith high impact resistantlaminated glass.

• A unique large skylight withoutcross bar provides superb upwardvisibility. The retractable sunscreenblocks direct sunlight.

Monitor. The new compact colormonitor displays information in locallanguage that is easy to read andunderstanding. Functions include:

– 5 programmable “Quick Access”buttons for one-touch selection offavorite functions.

– Filter and oil change warnings aredisplayed when the number of hoursreaches the maintenance interval.

– Tool select function allows theoperator to select up to 10 pre-definedhydraulic work tools.

– Adjustable braking characteristicsenable the operator to select three levelsof travel motor retarder aggressivenesswhen releasing the travel pedal.

– Provides a rear camera view that isactivated through the monitor menu.The optional camera is mounted onthe counterweight.

New Deluxe Seat. The new optionaldeluxe seat, equipped with an activeseat climate system, improves operatorcomfort. Cooled air flows through theseat cushions to reduce body perspiration.On cold days, a two-step seat heater keepsthe operator warm and comfortable.The fully adjustable seat with adjustablelumbar support automatically adjuststo the driver’s weight providing a morerelaxed and comfortable environment.

Heated Mirrors. Another new featureis electrically heated mirrors, increasingsafety and visibility in cold conditions.

Wipers. The parallel wiper systemmaximizes visibility in poor weatherconditions. The wiper virtually coversthe entire front windshield, cleaningthe operator’s immediate line of sight.

Lunch Box. A large, cooled storagecompartment is located behind theoperator’s seat. The compartmentprovides sufficient room to store itemssuch as a lunch box. An optional coversecures the contents during machineoperation.

Foot Pedals. Two-way pedals for traveland auxiliary circuits provide increasedfloor space, reducing the need to changepositions. The foot pedal for auxiliaryhigh-pressure circuit can be locked inthe off position and used as a footrestfor greater operator comfort.

7

Heavy-Duty Axles and Stabilizers.The D-Series Wheel Excavatorundercarriage with pin on/bolt ondesign provides excellent flexibility,rigidity and long life. Effective hydraulicline routing, transmission protection andheavy-duty axles make the undercarriageperfect for wheel excavator applications.The front axle offers wide oscillatingand steering angles. The transmissionis mounted directly on the rear axle forprotection and optimum ground clearance.

Advanced Disc Brake System. The discbrake system acts directly on the hubinstead of the drive shaft to avoidplanetary gear backlash. This solutioneliminates the rocking effect associatedwith working free on wheels. The axledesign lowers maintenance and lifetimecosts. Oil change intervals are at2,000 working hours, further reducingowner and operator costs.

Drive Line Concept. The rear mountedtransmission and robust drive linedesign, delivers excellent groundclearance for all off-road applications.

Fenders. The optional fenders provideexcellent coverage of the front and reartires, protecting the machine from mudand dirt. Water cannot splash up onthe wind screen or cooler. The fendersfurther protect the machine from stonesand debris being thrown up by the tires,providing additional safety for themachine, other vehicles and personnelworking close to the excavator.

Adjustable Travel Alarm. An adjustabletravel alarm is available to warnpeople when the machine is moving.Three settings can be selected throughthe monitor.

• Auto mode – alarm will stopsounding immediately when themachine is no longer traveling,or has been sounding for anuninterrupted 10-second interval.

• Standard mode – alarm operatesconstantly during moving, withonly manual cancellation.

• Off mode – Travel Alarm is disabled.

8

UndercarriageUndercarriage and axle design provides maximum strength, flexibility and mobility on wheels.

Industrial Stick

Sticks. Four different stick lengths areoffered to match different applicationrequirements:

• Short stick (2.0 m/6 ft 6 in) formaximum breakout force and liftingcapability.

• Medium stick (2.4 m/7 ft 6 in) forgreater crowd force and lift capacity.

• Long stick (2.6 m/8 ft 6 in) forgreater depth and reach requirements.

• Industrial stick (3.1 m/10 ft 2 in) foruse with free-swinging grapples inmaterial handling and industrialapplications.

Design. Booms and sticks are welded,box section structures with thick,multi-plate fabrications in high stressareas, for rugged performance andlong service life.

Flexibility. The choice of two boomsand four sticks provides the rightbalance of reach and digging forcesfor all applications.

One-Piece Boom. The one-piece boomfits best for all standard applicationssuch as truck loading and digging.A unique straight section in the curveof the side plate reduces stress flow andhelps increase boom life.

Variable Adjustable (VA) Boom.The VA boom offers improved rightside visibility and machine roadingbalance. When working in tight quartersor lifting heavy loads, the VA boomoffers the best flexibility.

Offset Boom. The offset boom addsmajor advantages as well as a highlevel of versatility. The large offsetdimensions (left 2460 mm (8 ft 1 in)and right 2760 mm (9 ft 1 in)) enableyou to dig along walls, over obstacles,grade while driving and dig under laidpipe. This combination coupled with atiltable ditch cleaning bucket allows youto operate a highly versatile machine.

9

Booms and SticksDesigned for maximum flexibility to keep production high on all jobs.

Work Tools. Caterpillar work tools aredesigned to function as an integral partof your excavator and to provide thebest possible performance in yourparticular application. All worktools are performance-matched toCat machines.

Quick Couplers. Quick Couplers enablethe operator to simply release one worktool and connect to another, makingyour hydraulic excavator highly versatile.Productivity also increases, as a carrierno longer needs to be idle between jobs.Caterpillar offers hydraulic and spindlequick coupler versions.

Buckets. Caterpillar offers a wide rangeof specialized buckets, each designedand tested to function as an integral partof your excavator. Buckets feature thenew Caterpillar K Series™ GroundEngaging Tools.

Hammers. Cat hammer series deliververy high blow rates, increasing theproductivity of your tool carriers indemolition and construction applications.Wide oil flow acceptance ranges makethe Caterpillar hammers suitable for awide range of carriers and provide asystem solution from one safe source.

Orange Peel Grapples. The Orange PeelGrapple is constructed of high-strength,wear-resistant steel, with a low andcompact design that makes it ideal fordump clearance. There are severalchoices of tine and shell versions.

Multi-Grapples. The Multi-Grapplewith unlimited left and right rotationis the ideal tool for stripping, sorting,handling and loading. The powerfulclosing force of the grab shells combinedwith fast opening/closing time ensuresrapid cycle time which translates tomore tons per hour.

Multi-Processors. Thanks to its singlebasic housing design, the Multi-Processorseries of hydraulic demolition equipmentmakes it possible to use a range of jawsets that can handle any demolition job.The Multi-Processor is the most versatiledemolition tool on the market.

Vibratory Plate Compactors.Cat compactors are performance-matchedto Cat machines, and integrate perfectlywith the Cat hammer line – brackets andhydraulic kits are fully interchangeablebetween hammers and compactors.

Shears. Cat shears provide superiorand effective scrap processing, andare highly productive in demolitionenvironments. Shears are compatiblewith a matching Cat excavator, andbolt-on brackets are available for eitherstick or boom-mounted options.

10

Work ToolsA wide variety of Work Tools help optimize machine performance. Purpose designed andbuilt to Caterpillar’s high durability standards.

Joystick Steering. The unique joysticksteering option enables an operator toreposition the machine while travelingin first gear by the use of the sliderswitch on the right joystick. This enablesthe operator to keep both hands onthe joysticks while simultaneouslymoving the implements and traveling.The operator can do more precise workfaster with increased safety aroundthe machine.

Tool Control. The integrated Tool Controlsystem allows the operator to select up to10 pre-set combinations. This eliminatesthe need to re-set the hydraulic parameterseach time a tool is changed. Individualflow and pressure can be programmedeasily as well as one-way/two-wayhydraulic functions. Each of theten-programmed tools can even begiven a specific name. The uniqueCat proportional sliding switchesand optional auxiliary pedal providemodulation to the tool to makeprecision work easy.

Ride Control. New for the D Series, theride control system improves operatorcomfort and allows the machine to travelfaster over rough terrain with improvedride quality for the operator. The ridecontrol system features accumulatorsacting as shock absorbers to dampen thefront part motion. Ride control can beactivated through a button located onthe soft switch panel in the cab.

Control Settings. There are 2 selectablecontrol settings and one automatictravel setting. The new automatic travelmode is activated with a button in theright hand console. In this setting, thetransmission will automatically shiftup or down, depending on the speedconditions. The operator can choose thebest power setting for both engine andhydraulic power versus fuel efficiency.

• Economy Mode – used for lifting,pipe setting, grading, slope finishingand precise work while reducingfuel consumption.

• Power Mode – used for normal truckloading and digging applications,trenching or hammer use.

• Travel Mode – automatically setwhen the travel pedal is actuated.It provides maximum speed anddrawbar pull.

Product Link. Product Link can assistwith Fleet Management to keep trackof hours, location, security and producthealth. The machine is pre-wired toaccept Product Link systems to beinstalled in the field. Product Link isalso available as a factory installedattachment.

Machine Security. An optional MachineSecurity System is available from thefactory. This system controls who canoperate the machine when, and utilizesspecific keys to prevent unauthorizedmachine use.

11

VersatilityA wide variety of optional factory-installed attachments are available to enhanceperformance and improve job site management.

Ground Level Maintenance. Caterpillardesigned its D-Series Wheel Excavatorswith the operator and service technicianin mind. Gull-wing doors, withpneumatically-assisted lift cylinders,effortlessly lift up to allow criticalmaintenance to be performed quicklyand efficiently while maintainingoperator safety.

Extended Service Intervals.The D-Series Wheel Excavator serviceand maintenance intervals have beenextended to reduce machine servicetime, increase machine availability andreduce operating costs. Using S•O•SSM

Scheduled Oil Sampling analysis,hydraulic oil change intervals can beextended up to 4,000 hours. Enginecoolant change intervals are 12,000 hourswith Cat Extended Life Coolant.

Self-Monitoring System with Auto-Diagnostics. The electronic engine andmachine controllers provide detaileddiagnostic capability for the servicetechnicians. The ability to store activeand intermittent indicators simplifiesproblem diagnosis and reduces totalrepair time, resulting in improvedmachine availability and loweroperating cost.

Engine Inspection. The engine can beaccessed from both ground level and theupper structure. The longitudinal layoutensures that all daily inspection itemscan be accessed from ground level.

Front Compartment. The frontcompartment hood can be openedvertically, providing outstanding groundlevel access to the batteries, air-to-airafter cooler, air conditioner condenserand the air cleaner filter.

Easy to Clean Coolers. Flat fins on allcoolers reduce clogging, making iteasier to remove debris. The maincooling fan and air conditioner condenserare both hinged for easier cleaning.

Swing-out Air Conditioner Condenser.The Air Conditioning condenser swingsout horizontally to allow completecleaning on both sides as well as excellentaccess to the air-to-air after cooler.

Air Filter. Caterpillar air filters eliminatethe use of service tools, reducingmaintenance time. The air filter featuresa double-element construction with wallflow filtration in the main element andbuilt-in mini-cyclone precleaners forsuperior cleaning efficiency. The airfilters are constantly monitored foroptimum performance. If airflowbecomes restricted, a warning is displayedby the way of the in-cab monitor.

12

Simplified and easy maintenance save you time and money.

Serviceability

Capsule Filter. The hydraulic returnfilter, a capsule filter, preventscontaminants from entering the systemwhen the hydraulic oil is changed.

Fuel Filters. Cat high efficiency fuelfilters with a Stay-Clean Valve™features a special media that removesmore than 98 percent of particles,increasing fuel injector life. Both theprimary and secondary fuel filters arelocated in the engine compartment andcan be easily changed from ground level.

New Auto-Lube System. The newautomatic lubrication system providesthe optimal amount of grease to all themain lubrication points, including thebucket linkage. The lubrication intervalcan be adjusted through the monitor,and status messages for the auto-lubesystem are displayed.

Scheduled Oil Sampling. Caterpillar hasspecially developed S•O•SSM OilSampling Analysis to help ensure betterperformance, longer life and increasedcustomer satisfaction. This thoroughand reliable early warning systemdetects traces of metals, dirt and othercontaminants in your engine, axle andhydraulic oil. It can predict potentialtrouble avoiding costly failures. YourCaterpillar dealer can give you resultsand specific recommendations shortlyafter receiving your sample.

Engine Oil. Caterpillar engine oil isformulated to optimize engine life andperformance. The specially formulatedoil is more cost effective and increasesengine oil change interval to 500 hours,providing industry leading performanceand savings.

Water Separator. The D Series isequipped with a primary fuel filter withwater separator located in the enginecompartment. For ease of service, thewater separator can be easily accessedfrom ground level.

Fuel Tank Drain. The durable,corrosion-free tank has a remote drainlocated at the bottom of the upper frameto remove water and sediment. The tankdrain with hose connection allowssimple, spill-free fluid draining.

Remote Greasing Blocks. For thosehard to reach locations, greasingblocks have been provided to reducemaintenance time. One block is locatedin the engine compartment with twogrease points for the swing bearingand front-end attachment. For theundercarriage, two remote blocksprovide easy access for greasing theoscillating axle and, as an option,the dozer blade.

New LED Rear Lights. Optional LightEmitting Diode (LED) Rear Lightsreplace the standard lights, for increasedvisibility on the job site, higher durabilityand longer life.

Handrails and Steps. Large handrailsand steps assist the operator in climbingon and off the machine.

Storage Box. There are two toolboxesintegrated in the steps of theundercarriage. Additionally, there isa waterproof storage box integratedinto the upper structure steps.

Anti-Skid Plate. They cover the top ofthe steps and upper structure to helpprevent slipping during maintenance.The Anti-Skid plate reduces theaccumulation of mud on the upperstructure, improving the cleanlinessand safety.

13

Fuel Efficiency. The D-Series WheelExcavators are designed for outstandingperformance with high fuel efficiency.This means more work done in a day,less fuel consumed and minimal impacton our environment.

Low Exhaust Emissions. The U.S. EPATier 3 compliant Cat C4.4 offersincreased performance and reliabilitywhile reducing fuel consumption andsound levels.

Quiet Operation. Operator and spectatornoise levels are extremely low as aresult of the new variable speed fanand remote cooling system.

Biodegradable Hydraulic Oil.The optional biodegradable hydraulicoil (HEES™) is formulated to provideexcellent high-pressure and high-temperature characteristics, and isfully compatible with all hydrauliccomponents. HEES is fully decomposedby soil or water microorganisms,providing a more environmentally-sound alternative to mineral-based oils.

Fewer Leaks and Spills. Lubricantfillers and drains are designed tominimize spills. Cat O-Ring Face Seals,Cat XT™ Hose and hydraulic cylindersare all designed to help prevent fluidleaks that can reduce the machineperformance and cause harm to theenvironment.

Longer Service Intervals. Workingclosely with your Caterpillar Dealer canhelp extend service intervals for engineoil, hydraulic oil, axle oil and coolant.Meaning fewer required fluids andfewer disposals, all adding up to loweroperating costs.

14

Environmentally Responsible DesignThe M313D helps build a better world and preserve the fragile environment.

Product Support. You will find nearlyall parts requirements at your localCaterpillar dealer parts counter.Cat dealers utilize a world-wide networkto find in-stock parts to minimize yourdowntime. To save money use genuineCat Reman parts. You will receive thesame warranty and reliability as newproducts at a substantial cost savings.

Selection. Make detailed comparisonsof the machines you are consideringbefore you buy. How long do componentslast? What is the cost of preventivemaintenance? Your Cat dealer can giveyou precise answers to these questionsto make sure you operate your machinesat the lowest cost.

Purchase. Consider the financingoptions available as well as day-to-dayoperating costs. This is also the timeto look at dealer services that can beincluded in the cost of the machine toyield lower equipment and owning andoperating costs over the long run.

Operation. Improving operatingtechniques can boost your profits.Your Cat dealer has videotapes, literatureand other ideas to help you increaseproductivity, and Caterpillar offerscertified operator training classes tohelp maximize the return on yourmachine investment.

Maintenance. More and more equipmentbuyers are planning for effectivemaintenance before buying equipment.Choose from your dealer’s wide rangeof maintenance services at the time youpurchase your machine. Repair optionprograms guarantee the cost of repairsup front. Diagnostic programs suchas S•O•SSM Fluid Analysis andTechnical Analysis help you avoidunscheduled repairs.

Replacement. Repair, rebuild or replace?Your Cat dealer can help you evaluatethe cost involved so you can make theright choice.

Services. Customer Service is criticaltoday in every business. That’s why somany people buy Cat equipment. Theyknow they are getting quality, reliabilityand performance backed-up with thebest Customer Service. Your Caterpillardealer offers a wide range of servicesthat can be set up under a CustomerSupport Agreement. The dealer willhelp you choose a plan that can coverthe whole machine including worktools, to help you getting the best outof your investment.

15

Complete Customer SupportCat dealer services help you operate longer with lower costs.

16 M313D Wheel Excavator specifications

Hydraulic System

Maximum PressureImplement circuit

normal 35 000 kPa 5,076 psiheavy lift 37 500 kPa 5,439 psi

Travel circuit 35 000 kPa 5,076 psiAuxiliary circuit

high pressure 35 000 kPa 5,076 psimedium pressure 18 500 kPa 2,683 psi

Swing mechanism 35 000 kPa 5,076 psiMaximum flow

Implement/travel circuit 190 L/min 50 gal/minAuxiliary circuit

high pressure 190 L/min 50 gal/minmedium pressure 50 L/min 13 gal/min

Swing mechanism 80 L/min 21 gal/min

Transmission

Maximum Travel Speed 37 km/h 23 mph1st Gear, Forward/Reverse 9 km/h 5.6 mph2nd Gear, Forward/Reverse 37 km/h 23 mphCreeper Speed (1st Gear) 3 km/h 2 mphCreeper Speed (2nd Gear) 13 km/h 8 mphDrawbar Pull 76 kN 17,085 lbMaximum Gradeability 58%

Service Refill Capacities

Fuel Tank Capacity 235 L 62 galCooling 26 L 7 galEngine Crankcase 8 L 2.1 galRear Axle Housing (Differential) 11.2 L 3 galFront Steering Axle (Differential) 9 L 2.4 galFinal DriveFinal Drive 2.5 L 0.7 galPowershift Transmission 2.4 L 0.7 galHydraulic Tank 95 L 25 galHydraulic System (including tank) 180 L 48 gal

Tires

Optional See Optional EquipmentStandard 10.00-20 dual pneumatic

Engine

Engine Model Cat® C4.4 ACERT™Net Power 95 kW 127 hpGross Power 102 kW 137 hpISO 9249 95 kW 127 hpEEC 80/1269 95 kW 127 hpBore 105 mm 4.13 inStroke 127 mm 5 inDisplacement 4.4 L 269 in3

Cylinders 4Maximum Torque at 1,400 rpm 550 N·m 406 lb ft

• Maximum power at 2,000 rpm

Weights

Operating Weight 13 600 kg (29,985 lb)to 15 800 kg (34,835 lb)

VA BoomRear dozer only 13 400 kg 29,542 lbRear dozer, front outriggers 14 350 kg 31,636 lbFront and rear outriggers 14 650 kg 32,298 lb

One-Piece BoomRear dozer only 12 950 kg 28,550 lbRear dozer, front outriggers 13 900 kg 30,644 lbFront and rear outriggers 14 200 kg 31,306 lb

Offset BoomRear dozer only 13 900 kg 30,644 lbRear dozer, front outriggers 14 850 kg 32,739 lbFront and rear outriggers 15 150 kg 33,400 lb

Dozer Blade 750 kg 1,653 lbOutriggers 960 kg 2,116 lbCounterweight 2900 kg 6,393 lb2.0 m (6'6") stick 370 kg 816 lb2.3 m (7'6") stick 390 kg 860 lb2.6 m (8'6") stick 440 kg 970 lb2.9 m (9'6") Industrial stick 380 kg 838 lb

• Above weights are calculated with standard counterweight.

Heavy counterweight option adds 400 kg (882 lb).

Swing Mechanism

Swing Speed 10.5 rpm Swing Torque 35 kN·m 25,815 lb ft

17M313D Wheel Excavator specifications

Sound Performance

Performance Exterior sound power levelaccording to 2000/14/ECis 103 db(A)

Interior sound pressurelevel LpA is 72 db (A)

• When properly installed and maintained, the cab offeredby Caterpillar, when tested with doors and windows closedaccording to ANSI/SAE J1166 OCT 98, meets OSHA andMSHA requirements for operator sound exposure limitsin effect at time of manufacture.

• Hearing protection may be needed when operating withan open operator station and cab (when not properlymaintained or doors/windows open) for extended periodsor in noisy environment.

Standards

Brakes SAE J1026 APR 90Cab/FOGS ISO 10262

Undercarriage

Ground Clearance 370 mm 15 inMaximum Steering Angle ± 35ºOscillating Axle Angle ± 9ºStandard AxleMinimum Turning Radius 6.2 m 20 ft(Outside of tire)Minimum Turning Radius 6.7 m 22 ft(End of VA boom)Minimum Turning Radius 8.1 m 27 ft(End of One-piece boom)


Stick Options Industrial Stick2.0 m (6'6") 2.3 m (7'6") 2.6 m (8'6") 2.9 m (9'6")

mm ft/in mm ft/in mm ft/in mm ft/in1 Shipping Height

VA Boom 3120 10'3" 3120 10'3" 3120 10'3" 3120 10'3"One-piece Boom 3120 10'3" 3120 10'3" 3120 10'3" 3120 10'3"Offset Boom 3120 10'3" 3120 10'3"

2 Shipping LengthVA Boom 8310 27'3" 8300 27'3" 8290 27'2" 8130 26'8"One-piece Boom 8090 26'7" 8080 26'6" 8090 26'7" 7950 26'1"Offset Boom 8300 27'3" 8300 27'3"

3 Support PointVA Boom 3820 12'6" 3470 11'5" 3320 10'11" 3580 11'9"One-piece Boom 3480 11'5" 3120 10'3" 2950 9'8" 3170 10'5"Offset Boom 3820 12'6" 3460 11'4"

4 Tail Swing RadiusVA Boom 2050 6'9" 2050 6'9" 2050 6'9" 2050 6'9"One-piece Boom 2050 6'9" 2050 6'9" 2050 6'9" 2050 6'9"Offset Boom 2050 6'9" 2050 6'9"

5 Counterweight ClearanceVA Boom 1232 4'1" 1232 4'1" 1232 4'1" 1232 4'1"One-piece Boom 1232 4'1" 1232 4'1" 1232 4'1" 1232 4'1"Offset Boom 1232 4'1" 1232 4'1"

6 Cab HeightVA Boom 3120 10'3" 3120 10'3" 3120 10'3" 3120 10'3"One-piece Boom 3120 10'3" 3120 10'3" 3120 10'3" 3120 10'3"Offset Boom 3120 10'3" 3120 10'3"

Note: All dimensions are approximate and cab height is without Falling Object Guards.

DimensionsAll dimensions are approximate.

Undercarriage withdozer only

Undercarriage with 2 setsof outriggers

Undercarriage with 1 set of outriggers and dozer

Roading positionwith 2.3 m/7'6" stick

➤

➤

3940 mm12'11"

➤➤2850 mm

9'4"

➤

➤

480 mm1'7"

➤➤2500 mm

8'2"

➤➤

➤➤

➤➤ 4965 mm16'3"

1100 mm3'7" ➤➤

1315 mm4'4"875 mm

2'10"➤➤

1400 mm4'7"

➤

➤

335 mm1'1"

➤➤4725 mm

15'6"

➤ ➤ ➤875 mm

2'10"785 mm

2'7"➤1100 mm

3'7"

480 mm1'7"

➤

➤

➤➤ 4355 mm14'3"

➤➤ ➤➤1315 mm

4'4"2500 mm

8'2"

370 mm1'3"

3665 mm12'0"

**120 mm 4.7"

** Maximum tire clearance with outrigger fully down.

➤➤ 2550 mm8'4"

➤➤ 2540 mm8'4"

➤➤ 3

➤➤ 4➤➤ 2

➤

➤

1

➤

➤

6

➤

➤

5


VA Boom, One-piece and Offset Boom Working Ranges

VA Boom One-piece Boom Offset BoomIndustrial Industrial

Stick* Stick*Stick Length 2.0 m (6'6") 2.3 m (7'6") 2.6 m (8'6") 2.9 m (9'6") 2.0 m (6'6") 2.3 m (7'6") 2.6 m (8'6") 2.9 m (9'6") 2.0 m (6'6") 2.3 m (7'6")1 Digging Height 9670 mm 9820 mm 10 060 mm 8500 mm 8600 mm 8620 mm 8790 mm 7140 mm 9670 mm 9820 mm

(31'9") (32'3") (32'0") (27'11") (28'3") (28'4") (28'10") (23'5") (31'9") (32'3")

2 Dump Height 6900 mm 7060 mm 7290 mm 4020 mm 5910 mm 5970 mm 6140 mm 3160 mm 6900 mm 7060 mm(22'8") (23'2") (23'11") (13'2") (19'5") (19'7") (20'2") (10'5") (22'8") (23'2")

3 Digging Depth 5160 mm 5450 mm 5750 mm 4670 mm 4990 mm 5290 mm 5590 mm 4500 mm 5160 mm 5450 mm(16'11") (17'11") (18'11") (15'4") (16'5") (17'4") (18'4") (14'9") (16'11") (17'11")

4 Vertical Wall 3500 mm 3600 mm 3890 mmN/A

3410 mm 3370 mm 3670 mmN/A

3500 mm 3600 mmDigging Depth (11'6") (11'10") (12'9") (11'2") (11'1") (12'1") (11'6") (11'10")

5 Depth 2.5 m (8'2") 4920 mm 5230 mm 5550 mmN/A

4750 mm 5070 mm 5390 mmN/A

4920 mm 5230 mmStraight Clean-up (16'2") (17'2") (18'3") (15'7") (16'8") (17'8") (16'2") (17'2")

6 Reach 8670 mm 8920 mm 9210 mm 7910 mm 8420 mm 8660 mm 8950 mm 7610 mm 8670 mm 8920 mm(28'6") (29'3") (30'3") (26'0") (27'8") (28'5") (29'5") (25'0") (28'6") (29'3")

7 Reach at 8490 mm 8740 mm 9030 mm 7710 mm 8230 mm 8480 mm 8770 mm 7400 mm 8490 mm 8740 mmGround Level (27'11") (28'8") (29'8") (25'4") (26'0") (27'10") (28'10") (24'4") (27'11") (28'8")

Bucket Forces 93 kN 93 kN 93 kNN/A

93 kN 93 kN 93 kNN/A

93 kN 93 kN(ISO 6015) (20,906 lbf) (20,906 lbf) (20,906 lbf) (20,906 lbf) (20,906 lbf) (20,906 lbf) (20,906 lbf) (20,906 lbf)

Stick Forces 73 kN 67 kN 62 kNN/A

73 kN 67 kN 62 kNN/A

73 kN 67 kN(ISO 6015) (16,410 lbf) (15,062 lbf) (13,938 lbf) (16,410 lbf) (15,062 lbf) (13,938 lbf) (16,410 lbf) (15,062 lbf)

* Industrial Stick has no bucket linkage. All dimensions refer to stick-nose.

Values 1-7 are calculated with bucket and quick coupler with a tip radius of 1552 mm (5'1").

Breakout force values are calculated with heavy lift on (no quick coupler) and a tip radius of 1405 mm (4'7").

2.0 m (6'6"), 2.3 m (7'6"), 2.6 m (8'6"),2.9 m (9'6") Sticks

2.0 m (6'6"), 2.3 m (7'6"), 2.6 m (8'6"),2.9 m (9'6") Sticks 2.0 m (6'6"), 2.3 m (7'6") Sticks


Variable adjustable boom One-piece boom5020 mm (16'6") 4815 mm (15'10")

2 sets Dozer 2 sets DozerDozer of stabilizer and stabilizer Dozer of stabilizer and stabilizerlowered lowered lowered lowered lowered lowered(mm) 2000 2300 2600 2000 2300 2600 2000 2300 2600 2000 2300 2600 2000 2300 2600 2000 2300 2600

Without quick coupler Stick length (ft/in) 6'6" 7'6" 8'6" 6'6" 7'6" 8'6" 6'6" 7'6" 8'6" 6'6" 7'6" 8'6" 6'6" 7'6" 8'6" 6'6" 7'6" 8'6"

Hammers H100H115 s × × × × × ×

Multiprocessors MP15 CC, PS × × × × × × × × × × × × × × × ×CR, S × × × × × × × × × × × × × ×

360° rotatable Shears S320 × × × × × × × × × × × × × × ×(boom mounted) S325 × × × × × ×

D ×Sorting & R × × ×Demo Grapple G315B D × × × × × × × × × ×

R × × × × × × × × × × × ×Compactors CVP75Orange Peel Grapples GSH9 300 L (0.39 yd3)(4 tines) 400 L (0.5 yd3)

360° Working Range Maximum Material density 1800 kg/m3 (3,000 lb/yd3)Maximum Material density 1200 kg/m3 (2,000 lb/yd3)Over the front only

× Not Compatible

Work Tools Matching GuideWhen choosing between various work tool models that can be installed onto the same machine configuration, consider work tool application, productivity requirements, and durability. Refer to work tool specifications for application recommendations and productivity information.

• Not all work tools are available in all areas.


Bucket Type mm in kg lb m3 yd3

610 24 384 847 0.34 0.45 3762 30 436 963 0.47 0.62 4

General Purpose 914 36 489 1080 0.61 0.8 5991 39 411 908 0.54 0.7 5

1067 42 534 1179 0.78 1.02 51219 48 586 1294 0.88 1.15 6610 24 445 983 0.44 0.58 3762 30 506 1116 0.58 0.76 4

General Purpose Wide Tip 914 36 577 1274 0.76 0.99 51067 42 581 1282 0.92 1.2 61219 48 704 1554 1.07 1.4 7610 24 464 1025 0.34 0.45 3762 30 539 1190 0.47 0.62 4

Heavy Duty Rock 914 36 614 1355 0.61 0.8 51067 42 668 1474 0.78 1.02 5

1219.2 48 743 1640 0.88 1.15 61524 60 572 1263 0.96 1.25 0

Ditch Cleaning 1676 66 606 1338 1.06 1.38 02007 79 424 935 0.54 0.7 01524 60 634 1400 0.67 0.87 0

Ditch Cleaning Tilt 1803 71 362 800 0.48 0.63 02007 79 380 838 0.40 0.52 0

Bucket SpecificationsContact your Caterpillar dealer for special bucket requirements.

Pin-on Buckets

Wid

th

Wei

ght

Capa

city

(SAE

)

No.

of

Teet

h

• All bucket recommendations are subject to material density.• All data is subject to change without notice.• Contact your Caterpillar dealer for bucket availability and specifications.


VA Boom – 2.0 m (6'6") stick

Grou

nd

3.0 m(10.0 ft)

4.5 m(15.0 ft)

6.0 m(20.0 ft)

m/ft

Rear dozer up kg *4400 3600 3400 2100(Load over front) lb *9,700 7,940 7,500 4,630

Rear dozer down kg *4400 4100 *3600(Load over rear) lb *9,700 9,040 *7,940

6.0 m Rear stab down kg *4400 *4400 *3600 3000(20.0 ft) (Load over rear) lb *9,700 *9,700 *7,940 6,610

2 sets stab down kg *4400 *4400 *3600 *3600(Load over front) lb *9,700 *9,700 *7,940 *7,940

Dozer and stab down kg *4400 *4400 *3600 *3600(Load over front) lb *9,700 *9,700 *7,940 *7,940

Rear dozer up kg *4900 *4900 *5200 3500 3500 2200 *2300 1500(Load over front) lb *10,800 *10,800 *11,460 7,720 7,720 4,850 *5,070 3,310

Rear dozer down kg *4900 *4900 *5200 4000 *4300 2500 *2300 1800(Load over rear) lb *10,800 *10,800 *11,460 8,820 *9,480 5,510 *5,070 3,970

4.5 m Rear stab down kg *4900 *4900 *5200 4900 *4300 3100 *2300 2200 7.37 m(15.0 ft) (Load over rear) lb *10,800 *10,800 *11,460 10,800 *9,480 6,830 *5,070 4,850 (24'2")

2 sets stab down kg *4900 *4900 *5200 *5200 *4300 *4300 *2300 *2300(Load over front) lb *10,800 *10,800 *11,460 *11,460 *9,480 *9,480 *5,070 *5,070

Dozer and stab down kg *4900 *4900 *5200 *5200 *4300 3800 *2300 *2300(Load over front) lb *10,800 *10,800 *11,460 *11,460 *9,480 8,380 *5,070 *5,070

Rear dozer up kg *7400 6200 5300 3400 3500 2200 *2200 1300(Load over front) lb *16,310 13,670 11,690 7,500 7,720 4,850 *4,850 2,870

Rear dozer down kg *7400 7200 *6000 3900 *4500 2500 *2200 1600(Load over rear) lb *16,310 15,870 *13,230 8,600 *9,920 5,510 *4,850 3,530


2 sets stab down kg *7400 *7400 *6000 *6000 *4500 4400 *2200 *2200(Load over front) lb *16,310 *16,310 *13,230 *13,230 *9,920 9,700 *4,850 *4,850

Dozer and stab down kg *7400 *7400 *6000 5700 *4500 *3700 *2200 *2200(Load over front) lb *16,310 *16,310 *13,230 12,570 *9,920 *8,160 *4,850 *4,850

Rear dozer up kg *8600 6100 5300 3400 3400 2100 2100 1300(Load over front) lb *18,960 13,450 11,690 7,500 7,500 4,630 4,630 2,870


1.5 m Rear stab down kg *8600 *8600 *6600 4700 4600 3000 *2300 1900 7.94 m(5.0 ft) (Load over rear) lb *18,960 *18,960 *14,550 10,360 10,140 6,610 *5,070 4,190 (26'1")


Dozer and stab down kg *8600 *8600 *6600 5600 *4700 3700 *2300 *2300(Load over front) lb *18,960 *18,960 *14,550 12,350 *10,360 8,160 *5,070 *5,070

Rear dozer up kg *10 200 5900 5300 3300 3300 2000 2200 1300(Load over front) lb *22,490 13,010 11,690 7,280 7,280 4,410 4,850 2,870

Rear dozer down kg *10 200 7000 *6600 3800 *4800 2400 *2500 1500(Load over rear) lb *22,490 15,430 *14,550 8,380 *10,580 5,290 *5,510 3,310

Rear stab down kg *10 200 8900 *6600 4700 4700 2900 *2500 1900 7.73 m(Load over rear) lb *22,490 19,620 *14,550 10,360 10,360 6,390 *5,510 4,190 (25'4")

2 sets stab down kg *10 200 *10 200 *6600 *6600 *4800 4300 *2500 *2500(Load over front) lb *22,490 *22,490 *14,550 *14,550 *10,580 9,480 *5,510 *5,510

Dozer and stab down kg *10 200 *10 200 *6600 5700 *4800 3600 *2500 2400(Load over front) lb *22,490 *22,490 *14,550 12,570 *10,580 7,940 *5,510 5,290

Rear dozer up kg 10 400 5800 5200 3100 3200 1900 2500 1500(Load over front) lb 22,930 12,790 11,460 6,830 7,060 4,190 5,510 3,310


-1.5 m Rear stab down kg *10 800 8900 *6800 4500 *4500 2800 *2800 2200 7.15 m(-5.0 ft) (Load over rear) lb *23,810 19,620 *14,990 9,920 *9,920 6,170 *6,170 4,850 (23'5")

2 sets stab down kg *10 800 *10 800 *6800 *6800 *4500 *4200 *2800 *2800(Load over front) lb *23,810 *23,810 *14,990 *14,990 *9,920 *9,260 *6,170 *6,170


Rear dozer up kg 10 400 5700 5000 3000(Load over front) lb 22,930 12,570 11,020 6,610

Rear dozer down kg *10 500 6800 *5600 3500(Load over rear) lb *23,150 14,990 *12,350 7,720

-3.0 m Rear stab down kg *10 500 8800 *5600 4400(-10.0 ft) (Load over rear) lb *23,150 19,400 *12,350 9,700

2 sets stab down kg *10 500 *10 500 *5600 *5600(Load over front) lb *23,150 *23,150 *12,350 *12,350

Dozer and stab down kg *10 500 *10 500 *5600 5500(Load over front) lb *23,150 *23,150 *12,350 12,130

Undercarriage configuration

Stick2.0 m (6'6")

* Indicates that the load is limited byhydraulic capacity rather than tippingcapacity. Lift capacity ratings are basedon SAE standard JISO 10567. Rated loadsdo not exceed 87% of hydraulic liftingcapacity or 75% of tipping load.

• All lift capacities are calculated withHeavy Lift on.

• Oscillating axle must be locked.• All values are calculated at the stick-nose.

Load Point Height

Load RadiusOver Frontor Rear

Load Radius Over Side

Load at Maximum Reach



Grou

nd

3.0 m(10.0 ft)

4.5 m(15.0 ft)

6.0 m(20.0 ft)

7.5 m (25.0 ft)

m/ft


Rear dozer down kg *4000 4000 *3600 2500(Load over rear) lb *8,820 8,820 *7,940 5,510




Rear dozer up kg *4000 *4000 *4600 3500 3500 2200 *2000 1400 7.65 m(Load over front) lb *8,820 *8,820 *10,140 7,720 7,720 4,850 *4,410 3,090 (25'1")


4.5 m Rear stab down kg *4000 *4000 *4600 *4600 *4100 3100 *2000 *2000(15.0 ft) (Load over rear) lb *8,820 *8,820 *10,140 *10,140 *9,040 6,830 *4,410 *4,410



Rear dozer up kg *7900 6300 5300 3500 3500 2200 2300 1400 *2000 1300(Load over front) lb *17,420 13,890 11,680 7,720 7,720 4,850 5,070 3,090 *4,410 2,870

Rear dozer down kg *7900 7200 *5800 4000 *4400 2600 3100 1600 *2000 1500(Load over rear) lb *17,420 15,870 *12,790 8,820 *9,700 5,730 6,830 3,530 *4,410 3,310

3.0 m Rear stab down kg *7900 *7900 *5800 4800 *4400 3100 3100 2000 *2000 1800 8.08 m(10.0 ft) (Load over rear) lb *17,420 *17,420 *12,790 10,580 *9,700 6,830 6,830 4,410 *4,410 3,970 (26'6")

2 sets stab down kg *7900 *7900 *5800 *5800 *4400 *4400 3100 3100 *2000 *2000(Load over front) lb *17,420 *17,420 *12,790 *12,790 *9,700 *9,700 6,830 6,830 *4,410 *4,410

Dozer and stab down kg *7900 *7900 *5800 5700 *4400 3700 *3100 2500 *2000 *2000(Load over front) lb *17,420 *17,420 *12,790 12,570 *9,700 8,160 *6,830 5,510 *4,410 *4,410

Rear dozer up kg *8800 6200 5200 3400 3500 2200 2300 1400 2000 1200(Load over front) lb *19,400 13,670 11,460 7,500 7,720 4,850 5,070 3,090 4,410 2,650


1.5 m Rear stab down kg *8800 *8800 *6500 4700 4600 3100 3200 2000 *2000 1800 8.19 m(5.0 ft) (Load over rear) lb *19,400 *19,400 *14,330 10,360 10,140 6,830 7,050 4,410 *4,410 3,970 (26'10")

2 sets stab down kg *8800 *8800 *6500 *6500 *4700 4400 *3700 3000 *2000 *2000(Load over front) lb *19,400 *19,400 *14,330 *14,330 *10,360 9,700 *8,160 6,610 *4,410 *4,410


Rear dozer up kg *10 000 6000 5300 3300 3300 2100 2300 1300 2100 1200(Load over front) lb *22,050 13,230 11,680 7,280 7,280 4,630 5,070 2,870 4,630 2,650

Rear dozer down kg *10 000 7100 *6600 3800 *4800 2400 *3000 1600 *2200 1400(Load over rear) lb *22,050 15,650 *14,550 8,380 *10,580 5,290 *6,610 3,530 *4,850 3,090

Rear stab down kg *10 000 8900 *6600 4700 *4600 3300 *3000 2000 *2200 1800 7.98 m(Load over rear) lb *22,050 19,620 *14,550 10,360 *10,140 7,280 *6,610 4,410 *4,850 3,970 (26'2")

2 sets stab down kg *10 000 *10 000 *6600 *6600 *4800 4400 *3000 3000 *2200 *2200(Load over front) lb *22,050 *22,050 *14,550 *14,550 *10,580 9,700 *6,610 6,610 *4,850 *4,850

Dozer and stab down kg *10 000 *10 000 *6600 5700 *4800 3600 *3000 2500 *2200 *2200(Load over front) lb *22,050 *22,050 *14,550 12,570 *10,580 7,940 *6,610 5,510 *4,850 *4,850



-1.5 m Rear stab down kg *10 700 8900 *6700 4600 4600 2800 *2500 2000 7.43 m(-5.0 ft) (Load over rear) lb *23,590 19,620 *14,770 10,140 10,140 6,170 *5,510 4,410 (24'4")


Dozer and stab down kg *10 700 *10 700 *6700 5700 *4700 3500 *2500 *2500(Load over front) lb *23,590 *23,590 *14,770 12,570 *10,360 7,720 *5,510 *5,510







Stick2.3 m (7'6")




Load Point Height






Grou

nd

3.0 m(10.0 ft)

4.5 m(15.0 ft)

6.0 m(20.0 ft)

7.5 m (25.0 ft)

m/ft

Rear dozer up kg *3500 3500 *3400 2200(Load over front) lb *7,720 7,720 *7,500 4,850

Rear dozer down kg *3500 *3500 *3400 2600(Load over rear) lb *7,720 *7,720 *7,500 5,730




Rear dozer up kg 3900 3500 3500 2300 *2100 1400 *1700 1300(Load over front) lb 8,600 7,720 7,720 5,070 *4,630 3,090 *3,750 2,870


4.5 m Rear stab down kg *3900 *3900 *3900 3100 *2100 2100 *1700 *1700 7.96 m(15.0 ft) (Load over rear) lb *8,600 *8,600 *8,600 6,830 *4,630 4,630 *3,750 *3,750 (26'1")


Dozer and stab down kg *3900 *3900 *3900 3800 *2100 *2100 *1700 *1700(Load over front) lb *8,600 *8,600 *8,600 8,380 *4,630 *4,630 *3,750 *3,750


Rear dozer down kg *7600 7200 *5600 3900 *4300 2600 *3500 1700 *1700 1400(Load over rear) lb *16,760 15,870 *12,350 8,600 *9,480 5,730 *7,720 3,750 *3,750 3,090

3.0 m Rear stab down kg *7600 *7600 *5600 4700 *4300 3100 3300 2100 *1700 *1700 8.38 m(10.0 ft) (Load over rear) lb *16,760 *16,760 *12,350 10,360 *9,480 6,830 7,280 4,630 *3,750 *3,750 (27'6")

2 sets stab down kg *7600 *7600 *5600 *5600 *4300 *4300 *3500 3100 *1700 *1700(Load over front) lb *16,760 *16,760 *12,350 *12,350 *9,480 *9,480 *7,720 6,830 *3,750 *3,750

Dozer and stab down kg *7600 *7600 *5600 *5600 *4300 3700 *3500 *2500 *1700 *1700(Load over front) lb *16,760 *16,760 *12,350 *12,350 *9,480 8,160 *7,720 *5,510 *3,750 *3,750








Rear stab down kg *9800 8800 *6500 4700 4600 3000 3200 2000 *1900 1700 8.28 m(Load over rear) lb *21,610 19,400 *14,330 10,360 10,140 6,610 7,050 4,410 *4,190 3,750 (27'2")








Rear dozer up kg 10 400 5700 5000 3000 3100 1900(Load over front) lb 22,930 12,570 11,020 6,610 6,830 4,190

Rear dozer down kg *11 000 6800 *6600 3500 *3500 2200(Load over rear) lb *24,250 14,990 *14,550 7,720 *7,720 4,850

-3.0 m Rear stab down kg *11 000 8800 *6600 4400 *3500 2800(-10.0 ft) (Load over rear) lb *24,250 19,400 *14,550 9,700 *7,720 6,170

2 sets stab down kg *11 000 *11 000 *6600 *6600 *3500 *3500(Load over front) lb *24,250 *24,250 *14,550 *14,550 *7,720 *7,720

Dozer and stab down kg *11 000 *11 000 *6600 5500 *3500 3400(Load over front) lb *24,250 *24,250 *14,550 12,130 *7,720 7,500

Rear dozer up kg *6600 5600(Load over front) lb *14,550 12,350

Rear dozer down kg *6600 *6600(Load over rear) lb *14,550 *14,550

-4.5 m Rear stab down kg *6600 *6600(-15.0 ft) (Load over rear) lb *14,550 *14,550

2 sets stab down kg *6600 *6600(Load over front) lb *14,550 *14,550

Dozer and stab down kg *6600 *6600(Load over front) lb *14,550 *14,550


Stick2.6 m (8'6")




Load Point Height





One-piece Boom – 2.0 m (6'6") stick

Grou

nd

3.0 m(10.0 ft)

4.5 m(15.0 ft)

6.0 m(20.0 ft)

m/ft

Rear dozer up kg *4800 3400 3400 2200 *2100 1700(Load over front) lb *10,580 7,500 7,500 4,850 *4,630 3,750

Rear dozer down kg *4800 3900 *4200 2500 *2100 1900(Load over rear) lb *10,580 8,600 *9,260 5,510 *4,630 4,190

4.5 m Rear stab down kg *4800 *4800 *4200 3000 *2100 *2100 7.11 m(15.0 ft) (Load over rear) lb *10,580 *10,580 *9,260 6,610 *4,630 *4,630 (23'4")

2 sets stab down kg *4800 *4800 *4200 *4200 *2100 *2100(Load over front) lb *10,580 *10,580 *9,260 *9,260 *4,630 *4,630

Dozer and stab down kg *4800 *4800 *4200 3700 *2100 *2100(Load over front) lb *10,580 *10,580 *9,260 8,160 *4,630 *4,630

Rear dozer up kg 5200 3200 3300 2100 *2100 1500(Load over front) lb 11,460 7,060 7,280 4,630 *4,630 3,310


3.0 m Rear stab down kg *5700 4600 *4500 3000 *2100 *2100 7.58 m(10.0 ft) (Load over rear) lb *12,570 10,140 *9,920 6,610 *4,630 *4,630 (24'10")

2 sets stab down kg *5700 *5700 *4500 4400 *2100 *2100(Load over front) lb *12,570 *12,570 *9,920 9,700 *4,630 *4,630




1.5 m Rear stab down kg *6500 4400 4600 2900 *2100 2000 7.70 m(5.0 ft) (Load over rear) lb *14,330 9,700 10,140 6,390 *4,630 4,410 (25'3")


Dozer and stab down kg *6500 5400 *4800 3500 *2100 *2100(Load over front) lb *14,330 11,910 *10,580 7,720 *4,630 *4,630



Rear stab down kg *6700 4200 4500 2800 *2300 2000 7.47 m(Load over rear) lb *14,770 9,260 9,920 6,170 *5,070 4,410 (24'6")

2 sets stab down kg *6700 6600 *4800 4200 *2300 *2300(Load over front) lb *14,770 14,550 *10,580 9,260 *5,070 *5,070




-1.5 m Rear stab down kg *7900 *7900 *6100 4200 *4300 2800 *2700 2300 6.87 m(-5.0 ft) (Load over rear) lb *17,420 *17,420 *13,450 9,260 *9,480 6,170 *5,950 5,070 (22'6")



Rear dozer up kg *6200 5400 *4500 2900(Load over front) lb *13,670 11,910 *9,920 6,390


-3.0 m Rear stab down kg *6200 *6200 *4500 4300(-10.0 ft) (Load over rear) lb *13,670 *13,670 *9,920 9,480




Stick2.0 m (6'6")




Load Point Height






Grou

nd

3.0 m(10.0 ft)

4.5 m(15.0 ft)

6.0 m(20.0 ft)

m/ft


Rear dozer down kg *2600 2500(Load over rear) lb *5,730 5,510

6.0 m Rear stab down kg *2600 *2600(20.0 ft) (Load over rear) lb *5,730 *5,730



Rear dozer up kg 3400 2200 *1800 1600(Load over front) lb 7,500 4,850 *3,970 3,530

Rear dozer down kg *4000 2500 *1800 *1800(Load over rear) lb *8,820 5,510 *3,970 *3,970

4.5 m Rear stab down kg *4000 3100 *1800 *1800 7.37 m(15.0 ft) (Load over rear) lb *8,820 6,830 *3,970 *3,970 (24'2")


Dozer and stab down kg *4000 3700 *1800 *1800(Load over front) lb *8,820 8,160 *3,970 *3,970



3.0 m Rear stab down kg *5500 4700 *4300 3000 *1800 *1800 7.82 m(10.0 ft) (Load over rear) lb *12,130 10,360 *9,480 6,610 *3,970 *3,970 (25'8")





1.5 m Rear stab down kg *6400 4400 4600 2900 *1900 *1900 7.94 m(5.0 ft) (Load over rear) lb *14,110 9,700 10,140 6,390 *4,190 *4,190 (25'1")



Rear dozer up kg *4300 *4300 4900 2900 3200 1900 *2100 1300(Load over front) lb *9,480 *9,480 10,800 6,390 7,060 4,190 *4,630 2,870


Rear stab down kg *4300 *4300 *6700 4200 4500 2800 *2100 1900 7.72 m(Load over rear) lb *9,480 *9,480 *14,770 9,260 9,920 6,170 *4,630 4,190 (25'4")

2 sets stab down kg *4300 *4300 *6700 6600 *4800 4200 *2100 *2100(Load over front) lb *9,480 *9,480 *14,770 14,550 *10,580 9,260 *4,630 *4,630




-1.5 m Rear stab down kg *7900 *7900 *6300 4200 *4400 2800 *2400 2200 7.14 m(-5.0 ft) (Load over rear) lb *17,420 *17,420 *13,890 9,260 *9,700 6,170 *5,290 4,850 (23'5")









Stick2.3 m (7'6")




Load Point Height






Grou

nd

3.0 m(10.0 ft)

4.5 m(15.0 ft)

6.0 m(20.0 ft)

7.5 m (25.0 ft)

m/ft



6.0 m Rear stab down kg *3000 *3000(20.0 ft) (Load over rear) lb *6,610 *6,610



Rear dozer up kg 3500 2200 *1600 1500(Load over front) lb 7,720 4,850 *3,530 3,310

Rear dozer down kg *3800 2500 *1600 *1600(Load over rear) lb *8,380 5,510 *3,530 *3,530

4.5 m Rear stab down kg *3800 3100 *1600 *1600 7.68 m(15.0 ft) (Load over rear) lb *8,380 6,830 *3,530 *3,530 (25'2")


Dozer and stab down kg *3800 3700 *1600 *1600(Load over front) lb *8,380 8,160 *3,530 *3,530

Rear dozer up kg *7800 6100 *5200 3300 3400 2100 2300 1400 *1600 1300(Load over front) lb *17,800 13,450 *11,460 7,280 7,500 4,630 5,070 3,090 *3,530 2,870


3.0 m Rear stab down kg *7800 *7800 *5200 4700 *4200 3000 *2600 2100 *1600 *1600 8.11 m(10.0 ft) (Load over rear) lb *17,800 *17,800 *11,460 10,360 *9,260 6,610 *5,730 4,630 *3,530 *3,530 (26'7")

2 sets stab down kg *7800 *7800 *5200 *5200 *4200 *4200 *2600 *2600 *1600 *1600(Load over front) lb *17,800 *17,800 *11,460 *11,460 *9,260 *9,260 *5,730 *5,730 *3,530 *3,530

Dozer and stab down kg *7800 *7800 *5200 *5200 *4200 3600 *2600 2500 *1600 *1600(Load over front) lb *17,800 *17,800 *11,460 *11,460 *9,260 7,940 *5,730 5,510 *3,530 *3,530

Rear dozer up kg 5000 3000 3200 2000 2300 1400 *1600 1200(Load over front) lb 11,020 6,610 7,060 4,410 5,070 3,090 *3,530 2,650


1.5 m Rear stab down kg *6200 4400 *4600 2900 *3200 2000 *1600 *1600 8.22 m(5.0 ft) (Load over rear) lb *13,670 9,700 *10,140 6,390 *7,060 4,410 *3,530 *3,530 (27'0")

2 sets stab down kg *6200 *6200 *4600 4300 *3200 3000 *1600 *1600(Load over front) lb *13,670 *13,670 *10,140 9,480 *7,060 6,610 *3,530 *3,530

Dozer and stab down kg *6200 5500 *4600 3500 *3200 2500 *1600 *1600(Load over front) lb *13,670 12,130 *10,140 7,720 *7,060 5,510 *3,530 *3,530

Rear dozer up kg *4600 *4600 4800 2900 3100 1900 2300 1400 *1800 1200(Load over front) lb *10,140 *10,140 10,580 6,390 6,830 4,190 5,070 3,090 *3,970 2,650

Rear dozer down kg *4600 *4600 *6700 3400 *4800 2200 *2600 1600 *1800 1500(Load over rear) lb *10,140 *10,140 *14,770 7,500 *10,580 4,850 *5,730 3,530 *3,970 3,310

Rear stab down kg *4600 *4600 *6700 4200 4500 2800 *2600 2000 *1800 *1800 8.01 m(Load over rear) lb *10,140 *10,140 *14,770 9,260 9,920 6,170 *5,730 4,410 *3,970 *3,970 (26'3")

2 sets stab down kg *4600 *4600 *6700 6600 *4800 4200 *2600 *2600 *1800 *1800(Load over front) lb *10,140 *10,140 *14,770 14,550 *10,580 9,260 *5,730 *5,730 *3,970 *3,970




-1.5 m Rear stab down kg *7400 *7400 *6400 4200 4400 2700 *2100 2000 7.46 m(-5.0 ft) (Load over rear) lb *16,310 *16,310 *14,110 9,260 9,700 5,950 *4,630 4,410 (24'6")



Rear dozer up kg *7500 5200 4800 2800 3100 1900(Load over front) lb *16,540 11,460 10,580 6,170 6,830 4,190


-3.0 m Rear stab down kg *7500 *7500 *5200 4200 *3300 2800(-10.0 ft) (Load over rear) lb *16,540 *16,540 *11,460 9,260 *7,280 6,170


Dozer and stab down kg *7500 *7500 *5200 *5200 *3300 *3300(Load over front) lb *16,540 *16,540 *11,460 *11,460 *7,280 *7,280


Stick2.6 m (8'6")




Load Point Height





Offset Boom – 2.0 m (6'6") stick

Grou

nd

3.0 m(10.0 ft)

4.5 m(15.0 ft)

6.0 m(20.0 ft)

m/ft






Rear dozer up kg *5100 5100 *5000 3500 3400 2100 *2200 1400(Load over front) lb *11,240 11,240 *11,020 7,720 7,500 4,630 *4,850 3,090












1.5 m Rear stab down kg *8400 8400 *6200 4600 *4500 2900 *2200 1700 7.94 m(5.0 ft) (Load over rear) lb *18,520 18,520 *13,670 10,140 *9,920 6,390 *4,850 3,750 (26'1")

2 sets stab down kg *8400 8400 *6200 *6200 *4500 *4200 *2200 *2200(Load over front) lb *18,520 18,520 *13,670 *13,670 *9,920 *9,260 *4,850 *4,850

Dozer and stab down kg *8400 8400 *6200 5500 *4500 3600 *2200 *2200(Load over front) lb *18,520 18,520 *13,670 12,130 *9,920 7,940 *4,850 *4,850

Rear dozer up kg 9800 5600 5200 3100 3200 1900 2000 1100(Load over front) lb 21,610 12,350 11,460 6,830 7,060 4,190 4,410 2,430


Rear stab down kg *9900 8700 *6300 4600 *4500 2800 *2400 1800 7.72 m(Load over rear) lb *21,830 19,180 *13,890 10,140 *9,920 6,170 *5,290 3,970 (25'4")


Dozer and stab down kg *9900 *9900 *6300 5500 *4500 3500 *2400 2200(Load over front) lb *21,830 *21,830 *13,890 12,130 *9,920 7,720 *5,290 4,850



-1.5 m Rear stab down kg *10 400 8600 *6500 4400 *4300 2600 *2600 2000 7.14 m(-5.0 ft) (Load over rear) lb *22,930 18,960 *14,330 9,700 *9,480 5,730 *5,730 4,410 (23'5")



Rear dozer up kg *10 100 5400 4800 2800(Load over front) lb *22,270 11,910 10,580 6,170




Dozer and stab down kg *10 100 *10 100 *5300 *5300(Load over front) lb *22,270 *22,270 *11,690 *11,690


Stick2.0 m (6'6")


• All lift capacities are calculated withadditional 400 kg (882 lb) counterweight,Heavy Lift on.


Load Point Height





Offset Boom – 2.3 m (7'6") stick

Grou

nd

3.0 m(10.0 ft)

4.5 m(15.0 ft)

6.0 m(20.0 ft)

7.5 m (25.0 ft)

m/ft






Rear dozer up kg *4200 *4200 *4700 3500 3400 2200 *1900 1300(Load over front) lb *9,260 *9,260 *10,360 7,720 7,500 4,850 *4,190 2,870


4.5 m Rear stab down kg *4200 *4200 *4700 *4700 *3900 3100 *1900 *1900 7.64 m(15.0 ft) (Load over rear) lb *9,260 *9,260 *10,360 *10,360 *8,600 6,830 *4,190 *4,190 (25'1")





3.0 m Rear stab down kg *7600 *7600 *5600 4600 *4200 3100 *3000 1900 *1900 1700 8.08 m(10.0 ft) (Load over rear) lb *16,760 *16,760 *12,350 10,140 *9,260 6,830 *6,610 4,190 *4,190 3,750 (26'6")


Dozer and stab down kg *7600 *7600 *5600 *5600 *4200 3600 *3000 2400 *1900 *1900(Load over front) lb *16,760 *16,760 *12,350 *12,350 *9,260 7,940 *6,610 5,290 *4,190 *4,190



1.5 m Rear stab down kg *8500 *8500 *6200 4600 4500 3000 3100 1900 *1900 1600 8.18 m(5.0 ft) (Load over rear) lb *18,740 *18,740 *13,670 10,140 9,920 6,610 6,830 4,190 *4,190 3,530 (26'10")



Rear dozer up kg 9700 5800 5200 3200 3200 1900 2100 1200 1900 1100(Load over front) lb 21,390 12,790 11,460 7,060 7,060 4,190 4,630 2,650 4,190 2,430


Rear stab down kg *9800 8700 *6300 4600 *4500 2800 *2900 1800 *2100 1700 7.98 m(Load over rear) lb *21,610 19,180 *13,890 10,140 *9,920 6,170 *6,390 3,970 *4,630 3,750 (26'2")






2 sets stab down kg *10 300 *10 300 *6400 *6400 *4500 *4100 *2400 *2400(Load over front) lb *22,710 *22,710 *14,110 *14,110 *9,920 *9,040 *5,290 *5,290








Stick2.3 m (7'6")


• All lift capacities are calculated withadditional 400 kg (882 lb) counterweight,Heavy Lift on.


Load Point Height





VA Boom Industrial Stick – 2.9 m (9'6") stick

Grou

nd

3.0 m(10.0 ft)

4.5 m(15.0 ft)

6.0 m(20.0 ft)

7.5 m (25.0 ft)

m/ft








4.5 m Rear stab down kg *4600 *4600 *4300 3400 *3100 2500 7.39 m(15.0 ft) (Load over rear) lb *10,140 *10,140 *9,480 7,500 *6,840 5,510 (24'3")


Dozer and stab down kg *4600 *4600 *4300 4100 *3100 3000(Load over front) lb *10,140 *10,140 *9,480 9,040 *6,840 6,610


Rear dozer down kg *7300 *7300 *5900 4300 *4600 2900 *3900 2000 *3200 1800(Load over rear) lb *16,100 *16,100 *13,000 9,480 *10,140 6,400 *8,600 4,410 *7,050 3,970



Dozer and stab down kg *7300 *7300 *5900 *5900 *4600 *4000 *3900 2900 *3200 2700(Load over front) lb *16,100 *16,100 *13,000 *13,000 *10,140 *8,820 *8,600 6,390 *7,050 5,950



1.5 m Rear stab down kg *9400 9100 *6700 5000 4900 3400 3500 2300 3300 2100 7.90 m(5.0 ft) (Load over rear) lb *20,720 20,060 *14,770 11,020 10,800 7,500 7,720 5,070 7,280 4,630 (25'11")

2 sets stab down kg *9400 *9400 *6700 *6700 *5000 *4600 *4000 3400 *3400 3100(Load over front) lb *20,720 *20,720 *14,770 *14,770 *11,020 *10,140 *8,820 7,500 *7,500 6,840

Dozer and stab down kg *9400 *9400 *6700 5900 *5000 *4000 *4000 2800 *3400 2600(Load over front) lb *20,720 *20,720 *14,770 13,000 *11,020 *8,820 *8,820 6,170 *7,500 5,730

Rear dozer up kg *10 400 6400 5600 3600 3700 2400 2600 1600 2500 1600(Load over front) lb *22,930 14,110 12,350 7,940 8,160 5,290 5,730 3,530 5,510 3,530

Rear dozer down kg *10 400 7400 *6900 4100 *5100 2700 3900 1900 *3700 1800(Load over rear) lb *22,930 16,310 *15,210 9,040 *11,240 5,950 8,600 4,190 *8,160 3,970

Rear stab down kg *10 400 9200 *6900 5000 4900 3300 3500 2300 3300 2200 7.71 m(Load over rear) lb *22,930 20,280 *15,210 11,020 10,800 7,280 7,720 5,070 7,280 4,850 (25'4")

2 sets stab down kg *10 400 *10 400 *6900 *6900 *5100 4700 *3900 3300 *3700 3200(Load over front) lb *22,930 *22,930 *15,210 *15,210 *11,240 10,360 *8,600 7,280 *8,160 7,050

Dozer and stab down kg *10 400 *10 400 *6900 5900 *5100 3900 *3900 2800 *3700 2700(Load over front) lb *22,930 *22,930 *15,210 13,000 *11,240 8,600 *8,600 6,170 *8,160 5,950




2 sets stab down kg *11 100 *11 100 *7000 *7000 *5200 4600 *3600 3500(Load over front) lb *24,470 *24,470 *15,430 *15,430 *11,460 10,140 *7,940 7,720


Rear dozer up kg 10 700 6000 5300 3300 3400 2200(Load over front) lb 23,590 13,230 11,680 7,280 7,500 4,850

Rear dozer down kg *11 300 7100 *6900 3800 *3900 2500(Load over rear) lb *24,910 15,650 *15,210 8,380 *8,600 5,510

-3.0 m Rear stab down kg *11 300 9100 *6900 4700 *3900 3000(-10.0 ft) (Load over rear) lb *24,910 20,060 *15,210 10,360 *8,600 6,610

2 sets stab down kg *11 300 *11 300 *6900 *6900 *3900 *3900(Load over front) lb *24,910 *24,910 *15,210 *15,210 *8,600 *8,600

Dozer and stab down kg *11 300 *11 300 *6900 5700 *3900 3700(Load over front) lb *24,910 *24,910 *15,210 12,570 *8,600 8,160



-4.5 m Rear stab down kg *6900 6900(-15.0 ft) (Load over rear) lb *15,210 15,210


Dozer and stab down kg *6900 6900(Load over front) lb *15,210 15,210


Industrial Stick2.9 m (9'6")




ä

ä


Load Point Height



ä

ä


One-piece Boom Industrial Stick – 2.9 m (9'6") stick

Grou

nd

3.0 m(10.0 ft)

4.5 m(15.0 ft)

6.0 m(20.0 ft)

7.5 m(25.0 ft)

m/ft



6.0 m Rear stab down kg *3500 3400(20.0 ft) (Load over rear) lb *7,720 7,500



Rear dozer up kg 3800 2500 2900 2000(Load over front) lb 8,380 5,510 6,390 4,410


4.5 m Rear stab down kg *4100 3400 *3000 2600 7.06 m(15.0 ft) (Load over rear) lb *9,040 7,500 *6,610 5,950 (23'2")





3.0 m Rear stab down kg *5500 5000 *4500 3300 *3100 2400 7.5 m(10.0 ft) (Load over rear) lb *12,130 11,020 *9,920 7,280 *6,830 5,290 (24'7")


Dozer and stab down kg *5500 *5500 *4500 4000 *3100 2900(Load over front) lb *12,130 *12,130 *9,920 8,820 *6,830 6,390

Rear dozer up kg 5400 3400 3600 2300 2600 1700 2600 1700(Load over front) lb 11,910 7,500 7,940 5,070 5,730 3,750 5,730 3,750


1.5 m Rear stab down kg *6600 4800 *4900 3200 3500 2300 *3400 2300 7.6 m(5.0 ft) (Load over rear) lb *14,550 10,580 *10,800 7,060 7,720 5,070 *7,500 5,070 (24'11")

2 sets stab down kg *6600 *6600 *4900 4600 *3800 3300 *3400 3300(Load over front) lb *14,550 *14,550 *10,800 10,140 *8,380 7,280 *7,500 7,280

Dozer and stab down kg *6600 5800 *4900 3800 *3800 2800 *3400 2800(Load over front) lb *14,550 12,790 *10,800 8,380 *8,380 6,170 *7,500 6,170



Rear stab down kg *6300 *6300 *7100 4600 4800 3100 3500 2300 7.4 m(Load over rear) lb *13,890 *13,890 *15,650 10,140 10,580 6,830 7,720 5,070 (24'3")

2 sets stab down kg *6300 *6300 *7100 6900 *5200 4500 *3900 3400(Load over front) lb *13,890 *13,890 *15,650 15,210 *11,460 9,920 *8,600 7,500




-1.5 m Rear stab down kg *9100 8500 *6800 4500 4800 3100 3900 2600 6.85 m(-5.0 ft) (Load over rear) lb *20,060 18,740 *14,990 9,920 10,580 6,830 8,600 5,730 (22'6")

2 sets stab down kg *9100 *9100 *6800 *6800 *5000 4400 *4100 3700(Load over front) lb *20,060 *20,060 *14,990 *14,990 *11,020 9,700 *9,040 8,160






Dozer and stab down kg *8100 *8100 *5700 5600(Load over front) lb *17,860 *17,860 *12,570 12,350


Industrial Stick2.9 m (9'6")




ä

ä


Load Point Height



ä

ä


Standard EquipmentStandard equipment may vary. Consult your Caterpillar dealer for details.

EngineAutomatic engine speed controlAutomatic starting aidCat C4.4 with ACERT™ Technology U.S. EPA Tier 3Fuel filterFuel/water separator with level indicatorMuffler

HydraulicsCat XT™-6 ES hosesHeavy lift modeLoad-Sensing Plus hydraulic systemManual work modes (economy, power)Oil coolerSeparate swing pumpStick regeneration circuit

UndercarriageHeavy-Duty axles with advanced travel motor with

adjustable braking forceOscillating front axle with remote greasingPin-on design preparation for dozer blade and outriggersTires, 10.00-20 16PR, dualTool box in undercarriageTwo-piece drive shaftTwo-speed transmission with manual and automatic

gear shiftingUndercarriage storage box

Other EquipmentAutomatic swing brakeCaterpillar Datalink and Electronic Technician capabilityCaterpillar Product LinkCounterweight 2900 kg (6,393 lb)Door locks and caps locks with Caterpillar one-key

security systemMirrors, frame and cabS•O•SSM quick sampling valves for engine oil, hydraulic oil

and coolant

Operator StationAdjustable armrestsAsh tray with cigarette lighter (24 volt)Beverage cup/can holderBolt-on FOGS capabilityBottle holderCoat hookFloor mat, washable, with storage compartmentFully adjustable suspension seatHeater and defrosterJoysticksLaminated front windshieldLeft side console, tiltable, with lock out for all controlsLiterature compartment behind seatLiterature holder in right consoleMobile phone holderMonitor and gauges with full color graphical display

Information and warning messages in local languageGauges for fuel level, engine coolant and hydraulic oil

temperatureFilters/fluids change interval, working hourIndicators for headlights, turning signal, low fuel, engine

dial settingClock with 10 day backup battery

Parking brakeParallel mounted top and bottom wiper and washerPositive filtered ventilation, pressurized cabPower supply, 12V-7ARear window, emergency exitRetractable seat beltSeat with adjustable mechanical suspensionSkylightSliding door windowsSteering column, tiltableStorage area suitable for a lunch boxSunshade for windshield and skylight

ElectricalAlternator, 75 ampLights

Boom working lightCab interiorRoading lights (two front, two rear)

Maintenance free batteriesMain shut-off switchSignal/warning horn


Optional EquipmentOptional equipment may vary. Consult your Caterpillar dealer for details.

Operator StationAdjustable hydraulic sensitivityAir conditioner, heater and defroster with automatic

climate controlCamera mounted on counterweight, displays through

cab monitorFalling objects guardFixed cab riser 1200 mm (4 ft)Lid for storage compartmentRadio

Radio, AM/FM stereo (24V)Radio ready mounting (12 V or 24 V) at rear location

including speakers and 12 V converterSeat

Adjustable high-back seat with mechanical suspensionAdjustable high-back seat with air suspension (vertical)Adjustable high-back deluxe seat with headrest, air

suspension (horizontal and vertical), two-step seatheater, automatic weight adjustments, ventilated seatcushions, pneumatically adjustable lumbar support

HeadrestTravel speed lockVandalism guardsVisor for rain protectionWindshield

One-piece high impact resistant50/50 split, openable70/30 spilt, openable

UndercarriageDozer blade, front and/or rear mounted, with remote greasingOptional tires

Dual tires10.00-20 dual solid rubber

Single tires18-R 19.5 XF single600/40-22.5 single

Outriggers, front and/or rear mountedSecond tool box for undercarriageSpacer rings for tires

Other EquipmentAuto-lube system for the implements and swing gearCat Machine Security SystemCounterweight 3300 kg (7,275 lb)Custom paintHeated mirrors, frame and cabJoystick steering

Enables steering of the machine in first gear using the sliding switch on joystick

Lockable tool box in upper frameRide control, for increased comfort while traveling and

workingWaste package with cyclone air pre-cleaner, reversible fan

with programmable time

Auxiliary Controls and LinesAuxiliary boom and stick linesAnti-drift valves for bucket, stick, VA Boom and tool

control/multi-function circuitsBasic control circuits:

Single actionOne-way, high pressure circuit, for hammering

applicationMedium pressure

Two-way, medium pressure circuit, for rotating or tilting of work tools

Tool control/multi functionOne/two-way high pressure for hammer application

or opening and closing of a work toolProgrammable flow and pressure for up to 10 work

tools – selection via monitorSecond high pressure

Additional two-way, high pressure circuit, for tools requiring a second high or medium pressure function

Quick coupler controlBiodegradable hydraulic oil (synthetic ester based)Lowering control devices for boom and stick

Front LinkageBooms

One-piece boom, 4.82 m (15 ft 10 in)Offset boom, 5.02 m (16 ft 6 in)Variable adjustable boom (two piece), 5.02 m (16 ft 6 in)

Bucket linkage with diverter valveSticks

2.0 m (6 ft 6 in) stick2.3 m (7 ft 6 in) stick2.6 m (8 ft 6 in) stick2.9 m (9 ft 6 in) Industrial stick with drop nose

ElectricalBack-up alarm with three selectable modesHeavy-duty maintenance free batteriesRefueling pumpRoading lights, rear consisting of long life LED modulesRotating beacon on cabWorking lights, cab mounted (front and rear)

M313D Wheel Excavator specifications34

Notes

M313D Wheel Excavator specifications 35

Notes

R

For more complete information on Cat products, dealer services,and industry solutions, visit us on the web at www.cat.com

© 2007 CaterpillarAll Rights Reserved

Printed in U.S.A.

Materials and specifications are subject to change without notice.Featured machines in photos may include additional equipment.

See your Caterpillar dealer for available options.

CAT, CATERPILLAR, ACERT, HEES, their respective logos, “Caterpillar Yellow” and thePOWER EDGE trade dress, as well as corporate and product identity used herein,

are trademarks of Caterpillar and may not be used without permission.

AEHQ5753-01 (02-07)

Replaces AEHQ5753

M313D Wheel Excavator

Specalog for M313D Wheel Excavator, AEHQ5753-01 · 2010-04-25 · Wheel Excavator boom, stick and...

Documents

Transcript of Specalog for M313D Wheel Excavator, AEHQ5753-01 · 2010-04-25 · Wheel Excavator boom, stick and...