SPEC GUIDE FLEX™ SYSTEM
Transcript of SPEC GUIDE FLEX™ SYSTEM
FLEX™ SYSTEMFor installation on top of any flooring surfaceSP
EC G
UID
E
Updated02.12.2021
HOW WE CAN HELP
Online
General Info & Questions
Design Team Services
Build your own Flex raceway system using our innovative web tool on the Connectrac website!
Click around and play in this online experience while learning the basics of how Flex works.
connectrac.com/build-your-own
Connectrac® believes in providing exceptional customer service by offering unique resources like our Design Team.
These industry specialists are available to help you specify the best Flex solution for your next project.
connectrac.com/design-services
Contact us any time! | 877.480.5637 | [email protected] | connectrac.com
TABLE OFCONTENTS
What is Flex?How it WorksGet StartedFlex Data Capacity
Pg 4Pg 6Pg 8Pg 9
HUDDLE
MEET
WORK
FLEX SYSTEMFor installation on top of any flooring surface
Available inthese finishes:
Silver (SV)
Dark Gray (DG)
*Silver finish shown here
Optional finish
Standard finish
Connectrac® Flex is...A floor-based power and data distribution system that allows users to quickly add connectivity or change power locations in a snap.
Any Space. Any Building. Any Time.™
4
Interchangeable Power DevicesQuickly snap into any Power Hub location
Connects Powertracs & provides access for power devices
Top Cover & Transition Ramps
(included with raceway)
Entrance Fitting
Raceway Powertrac
Power Hub
Pre-wired raceway segment
Data Device Explore the graphic to learn more about the Flex system for installation on top of any flooring surface.
HOW IT WORKS
A
B
C
C
Snaps into the raceway to provide data
connectivity
Quick connector powers entire raceway & allows
data to enter
6
0-6 cables
7-24 cables
25-42 cables
How much data do you need?
Turn to Next Page
Turn to Page 16
Turn to Page 22
Typical for conference rooms
Typical for up to 12 workstations
Typical for up to 21 workstations
Plan Flex Raceway System
Optimize Your Raceway Increase your system’s adaptability by adding more points of power access.
GET
STA
RTED
What is the current use of this space? What else might it be used for in the future? How might furniture be rearranged?
TIP: Visualize how your space might adapt and evolve over time.
GOOD
BETTER
BEST4
POWER HUBS
3POWER
HUBS
2POWER
HUBS
3’ 3’ 3’
3’6’
6’ 6’
3’
3’
FLEX DATA C
APACITY
TIP: For greater flexibility at minimal cost, add more Power Hubs and connect shorter Powertracs.
Power Hubs = access points for power devices
8 9
FLEX EXAMPLE RUN
1
22
11
1
In-Wall Entrance Fitting(15’ pre-wired conduit)
4’ Powertrac - SilverPower Hub
HubcapReceptacle Device (2-circuit 1, 2-circuit 2)
Data Device
A1.15
B.ON1.SV.4B.HUB
C.HUBCAPC.PW1.12
C.DT2
QTY DESCRIPTIONFLEX CODE
FLEX 0-6 Data C
ablesFlex 0-6 Data Cables
Included with every raceway order:
Top Covers
Transition RampsEnd Ramps
Entrance FittingA
Raceway B
DevicesC
PowertracB.ON1.SV.4
In-Wall Entrance Fitting
A1.15
PowertracB.ON1.SV.4
Power HubB.HUB
Power HubB.HUB
HubcapC.HUBCAP
Data DeviceC.DT2
Receptacle Device
C.PW1.12
In-Wall Entrance Fitting Surface-Mounted Entrance Fitting
Entrance FittingA Choose how your Flex raceways start at the wall.
Wall Entrance Fitting
A1A2
A
Transition accessories included
Surface-Mounted Entrance FittingIn-Wall Entrance Fitting A2.__A1.__
DESCRIPTIONDESCRIPTION FLEX CODEFLEX CODE
Use when cabling is running OUTSIDE the wall:Use when cabling is running INSIDE the wall:
A2.3A2.15A2.30
A1.15A1.30
3’ pre-wired conduit, 2’ Walltrac15’ pre-wired conduit, 12’ Walltrac30’ pre-wired conduit, 12’ Walltrac
15’ pre-wired conduit30’ pre-wired conduit
Base Trim included
TIP: Use A2.3 to connect to existing wall outlet boxes.
1110
Powertracs Power Hub
RacewayB Continue to build your raceways by connecting Powertracs and Power Hubs.
TIP: For greater flexibility at minimal cost, add more Power Hubs and
connect shorter Powertracs.
*Powertrac measurements are based on the on-center distance between the Entrance Fitting and/or Power Hubs.
Power Hub
B.ON1.EXT
B.ON1.90
B.HUB
DESCRIPTIONFLEX CODE
Powertrac
Powertrac Extender
Powertrac Corner
Power HubPowertrac Extender
Powertrac Corner
Connects Powertracs & provides access for power devices
Adds 6” to any of our standard Powertrac lengths
Allows raceway to make a 90° turn
Power Hub4’ Powertrac*4’ Powertrac* Power HubB
FLEX
0-6
Dat
a C
able
s
B.ON1.__
DESCRIPTIONFLEX CODE
Powertrac
Dark GrayOptional finish Length
SilverStandard finish
Powertrac
Pre-wired raceway segments available in multiple finishes and standard lengths:
B.ON1.DG.2B.ON1.DG.3B.ON1.DG.4B.ON1.DG.5B.ON1.DG.6
B.ON1.SV.2B.ON1.SV.3B.ON1.SV.4B.ON1.SV.5B.ON1.SV.6
2 ft3 ft4 ft5 ft6 ft
Top Covers & Ramps included
FLEX 0-6 Data C
ablesEquip your Flex raceway system with power & data devices.
C.HUBCAP
C.PW1.__
C.PW2.4
Power Devices
DevicesCChoose which devices (if any) you want to snap into your Power Hubs.
DESCRIPTIONFLEX CODE
Creates a walkable surface and makes power easily accessible for future needs
4-circuit monument that connects to most furniture base feeds
*Controlled devices available (see Technical Guide for more details)
C.PW1.11C.PW1.22C.PW1.33C.PW1.44C.PW1.12*C.PW1.34*C.PW1.14*
All circuit 1All circuit 2All circuit 3All circuit 42-circuit 1, 2-circuit 22-circuit 3, 2-circuit 42-circuit 1, 2-circuit 4
Receptacle Device
Hardwire Device
Hubcap
Power devices are all interchangeable and can be hot-swapped
when desired.
Hubcap
Receptacle Device
Hardwire Device
Hubcap Receptacle DeviceC
Power Hub Power Hub
Quad device available in various 4-circuit options:
12 13
8’-0”
4’-0” 4’-0”
WALL
9.4”
*Silver finish shown here
FLEX
0-6
Dat
a C
able
s FLEX 0-6 Data C
ablesData Devices
DevicesCThese devices go anywhere on the raceway.
Data DeviceC
Equip your Flex raceway system with power & data devices.
C.DT1
C.DT2
DESCRIPTIONFLEX CODE
Allows cables to enter/exit raceway
Fits up to 8 low-voltage keystone modules
Grommet
Data Device
Data DeviceGrommet
Optional Accessories Enhance your raceways with these additional options.
Extra HubcapVertical Wire Manager Rough-In Frame
VWM
RIF
C.HUBCAP
DESCRIPTIONFLEX CODE
Attaches to any power or data device to manage cabling
Installed before drywall to provide a rough opening for cabling
Creates a walkable surface and makes power easily accessible for future needs
Vertical Wire Manager
Rough-In Frame
Extra Hubcap
Accessories
Complete Raceway Shown with Top Covers, Transition Ramps, and End Ramps installed.
Data devices easily snap next to any
power device.
14 15
FLEX EXAMPLE RUN: 7-24 Data Cables
1
22
11
1
In-Wall Entrance Fitting(15’ pre-wired conduit)
4’ Powertrac - SilverPower Hub
HubcapReceptacle Device (2-circuit 1, 2-circuit 2)
Data Device
A1.15
B.ON2.SV.4B.HUB
C.HUBCAPC.PW1.12
C.DT2
$$$
$$$$$$
$$$$$$
$$$
QTY DESCRIPTIONFLEX CODE PRICE
FLEX 7-24 Data C
ables
Entrance FittingA
Raceway B
DevicesC
Flex 7-24 Data Cables
PowertracB.ON2.SV.4
In-Wall Entrance Fitting
A1.15
PowertracB.ON2.SV.4
Power HubB.HUB
Power HubB.HUB
Data DeviceC.DT2
HubcapC.HUBCAP
Receptacle DeviceC.PW1.12
Included with every raceway order:
Top Covers
Data Channel
Transition Ramps
End Ramps
In-Wall Entrance Fitting Surface-Mounted Entrance Fitting
Entrance Fitting
Wall Entrance Fitting
A1A2
A
Transition accessories included
Surface-Mounted Entrance FittingIn-Wall Entrance Fitting A2.__A1.__
DESCRIPTIONDESCRIPTION FLEX CODEFLEX CODE
Use when cabling is running OUTSIDE the wall:Use when cabling is running INSIDE the wall:
A2.3A2.15A2.30
A1.15A1.30
3’ pre-wired conduit, 2’ Walltrac15’ pre-wired conduit, 12’ Walltrac30’ pre-wired conduit, 12’ Walltrac
15’ pre-wired conduit30’ pre-wired conduit
Base Trim included
TIP: Use A2.3 to connect to existing wall outlet boxes.
A Choose how your Flex raceways start at the wall.
1716
Hubcap Receptacle DeviceC
Power Hub Power Hub
B.ON2.__
B.ON2.EXT
B.ON2.90
B.ON2.DG.2B.ON2.DG.3B.ON2.DG.4B.ON2.DG.5B.ON2.DG.6
B.ON2.SV.2B.ON2.SV.3B.ON2.SV.4B.ON2.SV.5B.ON2.SV.6
2 ft3 ft4 ft5 ft6 ft
*Powertrac measurements are based on the on-center distance between the Entrance Fitting and/or Power Hubs.
FLEX
7-2
4 D
ata
Cab
les
Power Hub4’ Powertrac*4’ Powertrac* Power HubB
Top Covers, Data Channel & Ramps included
Datatrac Corner
included
FLEX 7-24 Data C
ablesPowertracs Power Hub
RacewayB
TIP: For greater flexibility at minimal cost, add more Power Hubs and
connect shorter Powertracs.
Power HubB.HUB
DESCRIPTIONFLEX CODE
Powertrac
Powertrac Extender
Powertrac Corner
Power HubPowertrac Extender
Powertrac Corner
Adds 6” to any of our standard Powertrac lengths
Allows raceway to make a 90° turn
DESCRIPTIONFLEX CODE
Powertrac
Dark GrayOptional finish Length
SilverStandard finish
Powertrac
Pre-wired raceway segments available in multiple finishes and standard lengths:
C.HUBCAP
C.PW1.__
C.PW2.4
Power Devices
DevicesCChoose which devices (if any) you want to snap into your Power Hubs.
DESCRIPTIONFLEX CODE
Creates a walkable surface and makes power easily accessible for future needs
C.PW1.11C.PW1.22C.PW1.33C.PW1.44C.PW1.12*C.PW1.34*C.PW1.14*
All circuit 1All circuit 2All circuit 3All circuit 42-circuit 1, 2-circuit 22-circuit 3, 2-circuit 42-circuit 1, 2-circuit 4
Receptacle Device
Hardwire Device
Hubcap
Power devices are all interchangeable and can be hot-swapped
when desired.
Hubcap
Receptacle Device
Hardwire Device
Continue to build your raceways by connecting Powertracs and Power Hubs.
Connects Powertracs & provides access for power devices
Equip your Flex raceway system with power & data devices.
4-circuit monument that connects to most furniture base feeds
*Controlled devices available (see Technical Guide for more details)
Quad device available in various 4-circuit options:
18 19
Data DeviceC
8’-0”
4’-0” 4’-0”
WALL13.4”
*Silver finish shown here
FLEX 7-24 Data C
ablesFLEX
7-2
4 D
ata
Cab
les
Data Devices
DevicesC
C.DT1
C.DT2
DESCRIPTIONFLEX CODE
Allows cables to enter/exit racewayGrommet
Data Device
Data DeviceGrommet
Data Devices easily snap next to any Power Device.
Optional Accessories
Extra HubcapVertical Wire Manager Rough-In Frame
VWM
RIF
C.HUBCAP
DESCRIPTIONFLEX CODE
Attaches to any power or data device to manage cabling
Installed before drywall to provide a rough opening for cabling
Creates a walkable surface and makes power easily accessible for future needs
Vertical Wire Manager
Rough-In Frame
Extra Hubcap
Accessories
Complete Raceway
Equip your Flex raceway system with power & data devices.
Fits up to 8 low-voltage keystone modules
Enhance your raceways with these additional options.
Shown with Top Covers, Transition Ramps, and End Ramps installed.
These devices go anywhere on the raceway.
20 21
FLEX EXAMPLE RUN: 25-42 Data Cables
1
22
11
2
In-Wall Entrance Fitting(15’ pre-wired conduit)
4’ PowertracPower Hub
HubcapReceptacle Device (2-circuit 1, 2-circuit 2)
Data Device
A1.15
B.ON3.SV.4B.HUB
C.HUBCAPC.PW1.12
C.DT2
$$$
$$$$$$
$$$$$$
$$$
QTY DESCRIPTIONFLEX CODE PRICE
FLEX 25-42 Data C
ables
Entrance FittingA
Raceway B
DevicesC
Flex 25-42 Data Cables
PowertracB.ON3.SV.4
PowertracB.ON3.SV.4
Power HubB.HUB
Power HubB.HUB
Data DeviceC.DT2
ReceptacleDevice
C.PW1.12
In-Wall Entrance Fitting
A1.15
HubcapC.HUBCAP
Included with every raceway order:
In-Wall Entrance Fitting Surface-Mounted Entrance Fitting
Entrance Fitting
Wall Entrance Fitting
A1A2
A
Transition accessories included
Surface-Mounted Entrance FittingIn-Wall Entrance Fitting A2.__A1.__
DESCRIPTIONDESCRIPTION FLEX CODEFLEX CODE
Use when cabling is running OUTSIDE the wall:Use when cabling is running INSIDE the wall:
A2.3A2.15A2.30
A1.15A1.30
3’ pre-wired conduit, 2’ Walltrac15’ pre-wired conduit, 12’ Walltrac30’ pre-wired conduit, 12’ Walltrac
15’ pre-wired conduit30’ pre-wired conduit
Base Trim included
TIP: Use A2.3 to connect to existing wall outlet boxes.
Top Covers
Data Channels
Transition Ramps
End Ramps
A Choose how your Flex raceways start at the wall.
2322
*Powertrac measurements are based on the on-center distance between the Entrance Fitting and/or Power Hubs.
FLEX
25-
42 D
ata
Cab
les
$$$
HubcapPower Hub4’ Powertrac*4’ Powertrac* Power Hub
Receptacle DeviceCB
Power Hub Power Hub
Datatrac Corners included
B.ON3.EXT
B.ON3.90
B.ON3.__
B.ON3.DG.2B.ON3.DG.3B.ON3.DG.4B.ON3.DG.5B.ON3.DG.6
B.ON3.SV.2B.ON3.SV.3B.ON3.SV.4B.ON3.SV.5B.ON3.SV.6
2 ft3 ft4 ft5 ft6 ft
FLEX 25-42 Data C
ablesPowertracs Power Hub
RacewayB
TIP: For greater flexibility at minimal cost, add more Power Hubs and
connect shorter Powertracs.
Power HubB.HUB
DESCRIPTIONFLEX CODE
Powertrac
Powertrac Extender
Powertrac Corner
Power HubPowertrac Extender
Powertrac Corner
Adds 6” to any of our standard Powertrac lengths
Allows raceway to make a 90° turn
DESCRIPTIONFLEX CODE
Powertrac
Dark GrayOptional finish Length
SilverStandard finish
Powertrac
Pre-wired raceway segments available in multiple finishes and standard lengths:
C.HUBCAP
C.PW1.__
C.PW2.4
Power Devices
DevicesCChoose which devices (if any) you want to snap into your Power Hubs.
DESCRIPTIONFLEX CODE
Creates a walkable surface and makes power easily accessible for future needs
C.PW1.11C.PW1.22C.PW1.33C.PW1.44C.PW1.12*C.PW1.34*C.PW1.14*
All circuit 1All circuit 2All circuit 3All circuit 42-circuit 1, 2-circuit 22-circuit 3, 2-circuit 42-circuit 1, 2-circuit 4
Receptacle Device
Hardwire Device
Hubcap
Power devices are all interchangeable and can be hot-swapped
when desired.
Hubcap
Receptacle Device
Hardwire Device
Top Covers, Data Channels & Ramps included
Continue to build your raceways by connecting Powertracs and Power Hubs.
Connects Powertracs & provides access for power devices
Equip your Flex raceway system with power & data devices.
4-circuit monument that connects to most furniture base feeds
*Controlled devices available (see Technical Guide for more details)
Quad device available in various 4-circuit options:
24 25
Data DevicesC
8’-0”
4’-0” 4’-0”
WALL
17.4”
*Silver finish shown here
FLEX 25-42 Data C
ablesFLEX
25-
42 D
ata
Cab
les
Data Devices
DevicesC
C.DT1
C.DT2
DESCRIPTIONFLEX CODE
Allows cables to enter/exit racewayGrommet
Data Device
Data DeviceGrommet
Optional Accessories
Extra HubcapVertical Wire Manager Rough-In Frame
VWM
RIF
C.HUBCAP
DESCRIPTIONFLEX CODE
Attaches to any power or data device to manage cabling
Installed before drywall to provide a rough opening for cabling
Creates a walkable surface and makes power easily accessible for future needs
Vertical Wire Manager
Rough-In Frame
Extra Hubcap
Accessories
Complete Raceway
Equip your Flex raceway system with power & data devices.
Fits up to 8 low-voltage keystone modules
Enhance your raceways with these additional options.
Shown with Top Covers, Transition Ramps, and End Ramps installed.
These devices go anywhere on the raceway.
Data devices easily snap next to any
power device.
26 27