Spark tube project case
Transcript of Spark tube project case
Shenzhen SPARK Optoelectronic S & T Co., Ltd LED Tube Projects
SPARK TUBE LIGHT ADVANTAGES:
German VDE certification under process 1. High efficacy & low color difference: Up to 100lm/w; use high brightness and low SDCM
Epistar LED .
2. Outstanding safety & stability: 1.2M SMT machine NS semiconductor for power supply;
isolated power supply allowing excess ability with current to be 16MA (the market is normally
18MA) to make sure best safety and stability; high heat conductivity Dow Corning silicon pad
for heat release; power supply separately packed with fireproof and high pressure resistance
Mylar, further increases the safety and stability.
3. Excellent optical Performance: Special design emitting the light softly and uniform; low
decay with less than 7% after 6,000 hours; no photobiological harm to eyes and skins under
EN62471 certification.
3. Wide products range: T5, T8, T9 & T10 tubes available; various caps including rotatable
caps available; tubes cannot see the LED from cover available; double-side LED tubes used for
billboard available; tubes with dummy start compliant with German VDE standard available;
tubes can work with starter and induction ballast available.
4. Warranty: 3 years warranty.
5. Certification: CE, Rohs, EN62471 from TUV (European photobiological safety evaluation),
VDE from Germany under process estimated to be finished in April.
6. Others: OEM suppliers for some toppest lighting company from Europe; four patents for our
tube power supply, cap, heat release and optical design.
1.2m SMT Machine
Romania (T8 factory lighting)
Brazil (T8 office lighting)
Japan (T8 Nippon Express Office & bus station lighting)
Russia (T8 freezer lighting)
Hungary (T8 warehouse lighting)
Romania (T5 supermarket lighting)
China (T8 Wal-Mart supermarket lighting)
China (T8 factory lighting)
China (T8 office lighting)