Spare Parts and Service for

Sunlo Pumps

flo

High Speed Shaft Assemblies suitable for Sunflo Pump Type P-2000

Complete high speed shaft assemblies from Psicon BV suitable for Sunflo Pump type P-2000 allow a quick and easy exchange of defective units.Downtime of the pump is reduced to a minimum. All components meet the highest material and quality standards and are fully compatible with the original pump parts. Upon returning the failed high speed shaft assembly to Psicon BV the customer gets a discount on the the price of the new supplied unit.High speed shaft assemblies are available for 10.360, 12.263and 14.227*rpm.

*further pump speeds on request

All components such as impellers, inducers, high speedshafts, seal housings, ball bearings, shaft sleeves, rotating seal rings, mechanical seals etc. are also available separately.

Standard materials of constructionSeal housing, impeller, inducer,Shaft sleeves, seal retainer etc.: stainless steelHigh speed shaft: alloy steelO-rings: Viton, EP-rubber, Teflon

* further materials on request

Double Seal Arrangement

Single Seal Arrangement

www.psicon.eu info@psicon.eu

Sunflo is a registered trademark of Sundyne Corp. A subsidiary of Hamilton Sunstrand Corporation.Psicon BV is not related to the Sundyne Corp. in any way.

High Speed Shaft Assemblies suitable for Sunflo Pump Type P-3000

Complete high speed shaft assemblies from Psicon BV suitable for Sunflo Pump type P-3000 allow a quick and easy exchange of defective units.Downtime of the pump is reduced to a minimum. All components meet the highest material and quality standards and are fully compatible with the original pump parts. Upon returning the failed high speed shaft assembly to Psicon BV the customer gets a discount on the the price of the new supplied unit.High speed shaft assemblies are available for pump speeds ranging from 7.700 to 17.500 rpm.

*further pump speeds on request

All components such as impellers, inducers, high speedshafts, seal housings, ball bearings, shaft sleeves, rotating seal rings, mechanical seals etc. are also available separately.

Standard materials of constructionSeal housing, impeller, inducer,shaft sleeves, seal retainer etc.: stainless steelHigh speed shaft: alloy steelO-rings: Viton, EP-rubber, Teflon

* further materials on request

Double Seal Arrangement

Single Seal Arrangement

www.psicon.eu info@psicon.eu

Sunflo is a registered trademark of Sundyne Corp. A subsidiary of Hamilton Sunstrand Corporation.Psicon BV is not related to the Sundyne Corp. in any way.

The medium lubricated mechanical seals type KPS3 and KPG3 are specially designed for the application in Sunflo Pumps type P-3000. Identical dimensions with the original seals allow easy installation and interchangeability.

Design features:

-Multisprings-Bi-directional-Reverse pressure capability up to 10barg

Two seal designs are available:

Type KPS3 : Product seal (P3-77, P3-207) Type KPG3: Gearbox seal (P3-30)

Mechanical Seals suitable for Sunflo Pump Type P-3000

Operation limitsTemperature:

Pressure:Speed:

-40ºC to + 220ºC (TypKPS3)-40ºC to + 180ºC (TypKPG3) max. 25 barmax. 17000 min-1

Standard materials of constructionSeal face: carbon, antimony impr.

carbon, resin impr.Springs: stainless steelSeal retainer: stainless steelO-rings: Viton,EP-rubber,Teflon* further materials on request

Single Seal Arrangement Double Seal Arrangement

www.psicon.eu info@psicon.eu

Sunflo is a registered trademark of Sundyne Corp. A subsidiary of Hamilton Sunstrand Corporation.Psicon BV is not related to the Sundyne Corp. in any way.

The medium lubricated mechanical seals type KPS2 and KPG2 are specially designed for the application in Sunflo Pumps type P-2000. Identical main dimensions with the original seals allow easy installation and interchangeability.Design features:

-Multisprings-Bi-directional-Reverse pressure capability up to 10barg

Two seal designs are available:

Type KPS2 : Product seal (P2-77, P2-90) Type KPG2: Gearbox seal (P2-30)

Mechanical Seals suitable for Sunflo Pump Type P-2000

P2-158

P2-30 P2-77

P2-25

Single Seal Arrangement

P2-158

P2-30 P2-25P2-77

P2-90

Double Seal Arrangement

Operation limitsTemperature:

Pressure:Speed:

-40ºC to + 220ºC (TypKP2S)-40ºC to + 180ºC (TypKP2G) max. 25 barmax. 17000 min-1

Standard materials of constructionSeal face: carbon, antimony impr.

carbon, resin impr.Springs: stainless steelSeal retainer: stainless steelO-rings: Viton,EP-rubber,Teflon* further materials on request

www.psicon.eu info@psicon.eu

Sunflo is a registered trademark of Sundyne Corp. A subsidiary of Hamilton Sunstrand Corporation.Psicon BV is not related to the Sundyne Corp. in any way.

The following components which also can be ordered separately are included in the gearbox kit:

• Drive gear (P2-3)• Drive gear key (P2-5)• Low speed shaft assembly (P2-97) consisting

of:Low speed shaft (P2-96) and 2 x ball bearing(P2-95)

• Retaining ring (P2-114)• Slinger (P2-116)• Coupling hub key (P2-99)• Screw (P2-62)• Lock washer (P2-63)• Flat washer (P2-64)

Gearbox Kits suitable for Sunflo Pump Type P-2000

Complete gearbox kits from Psicon BV suitable for Sunflo Pump type P-2000 allow a quick and easy overhaul of failed gearboxes.All single components meet the highest material and quality standards and are fully compatible with the original pump parts.Gears are hardened and precision ground and meet the requirements of AGMA (American Gear Manufacturer) qualility class 11.Gearbox kits are available for pump speeds ranging from 10.360 rpm to 14.227 rpm*.

*further speeds on request

Overhauls can be carried out in our repair center or directly on site.

www.psicon.eu info@psicon.eu

Sunflo is a registered trademark of Sundyne Corp. A subsidiary of Hamilton Sunstrand Corporation.Psicon BV is not related to the Sundyne Corp. in any way.

Psicon BVPO Box 72942701 AG ZoetermeerThe Netherlands

Visit address:Stephensonstraat 452723 RM ZoetermeerThe Netherlands

E-mail: info@psicon.euWebsite: www.psicon.euTelephone: +31 79 - 362 59 13Fax: +31 79 - 362 59 12CoC no.: 51473119