Introduction to Southwestern Manufacturing Inc.

From concept to creation, Southwestern Manufacturing Inc. is dedicated to approaching every

Fabricating project with the mindset that “we can do it best”. Regardless of the application,

complexity, or industry—the team at Southwestern Manufacturing Inc. will apply experience,

care, and ingenuity to create a final product that is characterized by quality and value.

We provide quality, on-time, cost effective machining solutions through all phases of fabrication

and manufacturing all under one roof. We control the process from start to finish!

Southwestern Manufacturing Inc. operates in a competitive global market producing wide

ranging metal based assemblies and components across a variety of industry sectors including

but not limited to Mining, Oil & Gas, Crane and Dragline Components, Agricultural, Machine

building, and Heavy Equipment Manufacturing.

Our customers expect quality and our ISO 9000/2001 and CWB accreditation is just the start.

They also expect value for money reflected in smart manufacturing choices and on time delivery.

At Southwestern Manufacturing Inc., we have the vision, the infrastructure and the skills that

allow us to create and develop value added solutions for our customers. Global sourcing and

outsourcing expertise offer original solutions to traditional methods and allow our customers the

benefit of cost effective solutions in an ever changing global marketplace.

Our customers are demanding and that suits us just fine! Over the years it is our customers who

have made us better through intensive off site training and an open communication line. They

want us to use our wide ranging expertise and propose innovative manufacturing and machining

solutions, for metal based assemblies and machining that would challenge a lesser organization.

Our extensive plant capacity, developed to cater for our multi million pound turnover, is spread

across two adjacent facilities manned by over 120 employees and incorporates shot blast, stress

relieving, fitting, welding, machining, non destructive testing, final paint, right on through to our

own logistics network, resulting in high value finished items across many diverse sectors

delivered right to your door.

This is a single source solution for the customer as opposed to using a range of other individual

supply chain members carrying out single activities.

2

3

Inspection/Quality

Southwestern Manufacturing Inc. takes pride in our work and quality assurance is first

and foremost. We can approach this with proven inspection/quality procedures:

- All fabrications are inspected in process at various stages. During each operation

the inspectors sign off the traveler and after all fab items are finished (eg. Fit,

weld, stress, prime) a final inspection and sign off are completed.

- All machining is 100% inspected using calibrated tools, CMM’s and a staff of

qualified machining inspectors who also give the fabrications a second look prior

to signing off.

- Parts that do not pass inspection are repaired and 100% re-inspected.

Custom Fabrication

Southwestern Manufacturing Inc. specializes in custom manufacturing from the smallest

of parts, ranging in 1-2 lbs to large bases, and bolster plates ranging from 40-50 thousand

pounds. We have the in house capabilities to produce parts of any shape or size, form

any type of material, be it Stainless Steel, Aluminum, or special steel such as T1, P2,

4140, etc. We have in-house design and processing capabilities. We are able to support

all types of CAD drawings sent to us by various customers. Southwestern Manufacturing

Inc. is familiar and well versed in the design and build of all types of manufactured parts

and equipment ranging from fixtures, bases, 80-foot diameter gears, brackets,

construction, agricultural, and mining equipment of all shapes and sizes.

Stress Relieving/Shot Blasting

After stress relieving and parts cool from the oven, they are typically rough and covered

with scale. To remove this scale, Southwestern Manufacturing has a large manual steel

shot blast room and a mid-sized wheelabrator. All parts from the oven are blasted before

priming.

Painting

After blasting parts require a coat of primer to protect the bare metal. Southwestern

Manufacturing Inc. has two large paint booths and complete priming or finish paint as

required by our customers

We also have an isocyanides program set up and have our painters regularly tested.

UT Testing & Mag-particle Inspection

As customer requirements began to get more involved, Southwestern Manufacturing Inc.

was required to purchase Ultrasonic Testing (UT) and Mag-particle inspection.

To date, we have an on board employee with level 2 Mag-particle and completing level 1

UT. We employ an outside contractor who is certified for all levels of UT & Mag-

particle inspection. All inspection methods are certified and documented and available

per job requirements.

5

80 FT DIAMETER

6

7

30 FT DIAMETER

8

9

10

36 FT LONG

11

12

13

14

15

16

1752 FT LONG

18

19

20

21

22

2383,000 LBS

Southwestern Manufacturing Inc., 3710 Peter Street, Windsor, Ontario, N9C 1J9 (519) 985-6161 FAX: (519) 985-6744

E-MAIL: office@SouthwesternManufacturing.com WEB: www.SouthwesternManufacturing.com

CUSTOM FABRICATING & MACHINING OVEN NORMALIZING & SHOT BLASTING

C. N. C. PROFILE CUTTING

LIST OF FABRICATING EQUIPMENT

2 Thermal Stress Relieving Ovens

Sizes: (9' x 14' x 30') (8' x 8' x 9')

1 Shot Blast System – Swings 9' (fee t) in diameter 1 High Pressure Shot Blast Room (12' x 20' x 32') 2 C.N.C. Flame Cutting Machine – 4 Torch 3 Marvel Vertical Saws 10 Machined Layout Tables 50 Mig Welders (Certified) 8 Portable Torch Sets 2 Paint Booth & Painting Equipment 1 Iron Worker 1 50 + 25 Tonne (Ton) Cranes 2 40 Tonne (Ton) Cranes 3 30 Tonne (Ton) Cranes 6 10 Tonne (Ton) Cranes 3 5 Tonne (Ton) Cranes 6 6,000 lb Capacity Fork Lift 1 10,000 lb Capacity Fork Lift 1 25,000 lb Capacity Fork Lift Lifting capacity up to 180,000 lbs. 2 Handheld Submerged Arc Units 1 Stationary Submerged Arc Unit

***250 Thousand Square Feet of Manufacturing***

24

LIST OF MACHINING EQUIPMENT

7. 8. 2008

6. 2013 - AWEA BL3018S CNC High Speed Rotary Table Boring Mill X 118" Y 71" Z 51" W 24"

- AWEA BL2018 CNC High 2009 - Olympia VTC - Mill & Turn, 30+ Ton Table Capacity, 71" Swing

5. 2014 - Fermat WF 13 R CNC - Floor Type Horizontal Boring Machine X 315" Y 138" Z 24" W 30"

Speed Rotary Table Boring Mill X-78" Y 70" Z 51" W 22" 9. 2004

11. Retro fit 2013 - PARPAS SL 100 CNC Boring Mill X 120" Y 57" Z 30"

- PARPAS ML 130 CNC Floor Type Boring Mill X 196" Y 98" Z 51" 10. 2015 - JUARISTI RETRO FIT CNC Rotary Table Boring Mill X 160" Y 80" Z 50"

4. 2014 TOYODA 1250 - Palletize Horizontal Machine Center Pallet Size 49" x 49"

12. Retro fit 2006 - LUCAS CNC Boring Mill X 135" Y 120" Z 66" W 30" 13. Retro fit 2010 - - RAMBAUDI CNC Horizontal Milling Machines X 100" Y 49" Z 40"

21. Retro fit 2010 - RAMBAUDI CNC Horizontal Milling Machines X 100" Y 49" Z 40"

14. 2006 – REKO Gantry Mill 100"x288"x68" 15. Retro fit 2005 – WOTAN Boring Mill X 588" Y 120" Z 66 " 16. 2007 - TOSHIBA Rotary Table Boring Mill X 118" Y 78" Z 72" W 32" 17. 2007 - TOSHIBA Rotary Table Boring Mill X 158" Y 118" Z 80" W 70" 18. 2007 - TOSHIBA Rotary Table Boring Mill X 80" Y 80" Z 50" W 20" 19. 20. 2009 - HAAS X 64" Y 40" Z 31"

2008 - KIA Rotary Table Boring Mill X 120" Y 80" Z 60"

** ALL MACHINES ARE CALIBRATED EVERY 6 MONTHS **

INSPECTION MACHINES

1. MITUTOYO DCC CMM L 50" W 40" H 60" 2. PORTAGE CMM L 84" W 84" H 64" 3. DEA CMM L 72" W 42" H 36" 4. DEA – LANDIS X 268" Y 100" Z 100" 2011 – PC-DMIS Software

TRUCKING

1. 2011 – Volvo Tractor – 48' Trailer 2. 2008 – Mack Tractor – 30' Trailer 3. 2005 – GMC – 4 Ton Covered Flatbed 4. 2011 – Dodge Ton Pick up

3. 2015 - Fermat WF 13R CNC - Floor Type Horizontal Boring Machine X 327" Y 118" Z 28" W 29"

2. 2015 - SNK BP 130/3.0 - Horizontal Boring Mill - X 118" Y 78" Z 63" W 28" 1. 2015 - SNK BP 130/3.0 - Horizontal Boring Mill - X 118" Y 78" Z 63" W 28"

Travel X 94.5 x Y 70

FEBRUARY 2018

LOCATIONS

Head office & Plant #1 - 3710 Peter St.Windsor, Ontario - N9C 1J9

Plant #2 - 3766 Peter St.Windsor, Ont.

Plant #3 - 715 SprucewoodWindsor, Ont.

Plant #4 - 6835 Monroe Blvd. Taylor, Michigan 48180

FOR ALL AMERICAN CUSTOMERS: All customs paperwork and trucking will be handled completely by Southwestern Manufacturing Inc.

COMBINED MANUFACTURING SPACE - 250,000 sq. ft

Please email your request for quote to:office@southwesternmanufacturing.com

RUSH WORK IS NEVER A PROBLEM

WINDSOR, ONTARIO

E.C Row Expy

Huron Church Rd.

Sprucewood Ave.

Map

lew

ood

Dr.

6

5

1

2

3

4

7

94

96

75

8

Sprucewood Ave.

DETROIT,MICHIGANTAYLOR

Head Office & Plant #1

Plant #2

Plant #3

Plant #4

Detroit River

Ambassador Bridge

Marine Transport & Rail Access

Essex Terminal RailwayOjibway Yard

1

2

3

4

5

6

7

8