8/7/2019 Soumyasanta

1/3

8/7/2019 Soumyasanta

2/3

Present Status: Completed B-TECH in Electronics and CommunicationEngineering from SEACOM ENGINEERING COLLEGE(W.B.U.T) in theyear 2010 .

Educational Background :

Technical Skill:Language Known : C Language.

Subjects of Interest : Basic of networking,Basic Electronics,DigitalElectronics,VLSI,Basic of Communication.

Industrial Visit:

I have done summer training in Jadavpur University for one month. During the

training I have done a project on VLSI and its implementation in the different field under the guidance of Dr Anup Dandapat and Dr Hiranmoy Saha.

I am also undergoing EDGE course from CMC(Taratala) which is on Java,C#and Oracle.

Computer Proficiency :

Operating Systems : Windows Xp, Windows Vista ,Windows 98..

FINAL YEAR PROJECT:

I have completed my project on PC to PC Fibre Optics Communication under the guidance of Mr Shantanu Chakraborty. The project PC to PC fiber optic communication deals with datatransfer from one computer to another. It uses C programming and the serial ports of thePCs. The ports are programmed in C. We use MAX 232 to convert RS 232 logic to TTLlogic and then an optical transmitter circuit to transmit data via fiber optic cable. The

Degree University Year SGPA Avg.

4th year 2 nd semester WBUT 2009-2010 8.17

7.59

4th year 1 st semester WBUT 2009-2010 7.63

3nd year 2 nd semester WBUT 2008-2009 7.54

3nd year 1 st semester WBUT 2008-2009 6.92

2nd year 2 nd semester WBUT 2007-2008 7.67

2nd year 1 st semester WBUT 2007-2008 7.63

1st year 2 nd semester WBUT 2006-2007 7.97

1st year 1 st semester WBUT 2006-2007 7.67

Board Examination School Year %

Higher Secondary Kalidhan Institution 2006 66

Secondary Nava Nalanda High School 2003 74(Appx)

8/7/2019 Soumyasanta

3/3

optical transmitter circuit has a LED which is matched as far the cable and MAX 232 isconcerned. At the receiver we have an optical receiver circuit which receives data using aphoto transistor and a MAX 232 again to convert TTL logic to RS 232 for the serial port atthe receiving end computer. The desired baud rate can be set using the program. For transmitting data the program is executed once and whatever is present at the serial port issent to the other

Computer via the fiber optic cable. At the receiver the program is executed to receive dataon the serial port.

I do hereby declare that all the above stated statements are true to thebest of my knowledge and belief.

.......Date : (Signature)

Soumyasanta Bhattacharya