Sorbitol Production Plant Please click on our logo or any link in this presentation to be redirected...
-
Upload
janel-blair -
Category
Documents
-
view
213 -
download
0
Transcript of Sorbitol Production Plant Please click on our logo or any link in this presentation to be redirected...
Sorbitol Sorbitol Production PlantProduction Plant
SorbitolProduction Plant
Please click on our logo or any link in
this presentation to be redirected to our
website, email or other
documentation.
Thank You!
17A Marlen Drive Hamilton, NJ 08691 USA Tel: (609) 586-8004 Fax: (609) 586-0002
www.ippe.com
General Overview
Start Up: 1976
Shut Down: 1997
Capacity: 6500 tons per year (22 tpd of 40% solution)
The plant also consists of the following:• (3) 700 liter, hydrogenation reactors/autoclaves
(vertical tube reactors)
• H2 Electrolysis Plant
Process Description After the glucose is dissolved, the catalyst is added to the solution and
the pH value is adjusted.
The solution is then transported by dosage pumps into autoclaves.
Under high pressure and temperature, hydrogenation is performed in three steps:
o The catalyst is removed from the prepared 40% solution of Sorbitol through decantation (1st step) and centrifugal separation (2nd step).
o Nickel+2 is then removed by ion exchange (3rd step)
The prepared solution is stored in vessels for use in the production of Ascorbic Acid synthesis, or it is transported to the evaporation unit for use in the production of 70% Sorbitol solution and Sorbitol crystallized by fluid bed granulation
Contact Information
MICHAEL JOACHIMDIRECTOR, PLANTS DEPT.
Tele: 609-838-5930 (direct)Mobile: 609-516-9107
SANJEEV REGEVP GLOBAL PLANT SALES
Tele: 609-838-5938 (direct)Mobile: 609-510-2616