Solving your need for greater filtration efficiency€¦ · Catalyst recovery, removal of pipe...
Transcript of Solving your need for greater filtration efficiency€¦ · Catalyst recovery, removal of pipe...
Bag Filter Housings
Solving your need for greater filtration efficiency
Eaton manufactures bag filter housings and filter bags to global standards for industries around the world. In recent years, a number of changes have been made to the manufacturing process to raise the level of quality delivered to our customers.
The selection of single bag filter housings ranges from those suitable for exacting absolute filtration applications to high-quality housings designed, especially for cost-sensitive applications and everything in between. Multi-bag filter housings that accommodate up to 36 individual filter bags for flow rates of up to 6,341 GPM (1,440 m3/h) are available in a number of different designs.
Eaton is helping customers reduce process costs through its development of a unique line of proprietary filter bags and elements that offer a compelling, cost-effective alternative to more expensive filtration systems. Customers can choose from a complete line of single or multi-bag filter housings designed to meet the needs of the most demanding applications.
Eaton offers a full range of filter bags: more than 1,500 choices in all, from economically sewn filter bags for standard applications, to welded, multi-layered bags for more demanding applications.
For more information, please email us at [email protected] or visit www.eaton.com/filtration
© 2014 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.
North America 44 Apple Street Tinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700
Europe/Africa/Middle East Auf der Heide 2 53947 Nettersheim, GermanyTel: +49 2486 809-0
Internormen Product Line Friedensstraße 41 68804 Altlußheim, GermanyTel: +49 6205 2094-0
Begerow Product LineAn den Nahewiesen 24 55450 Langenlonsheim, GermanyTel: +49 6704 204-0
ChinaNo. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. ChinaTel: +86 21 5200-0099
Singapore4 Loyang Lane #04-01/02 Singapore 508914Tel: +65 6825-1668
BrazilAv. Julia Gaioli, 474 – Bonsucesso 07251-500 – Guarulhos, BrazilTel: +55 11 2465-8822
8
Bag Filter Housings
AutomotiveFiltration of pre-treatment bath, filtration of e-coat, top coat and clear coat, primer, paint ring line filters, parts cleaning fluids, drawing compounds, lubricants, metal working fluids and pump intake filters.
ChemicalCatalyst recovery, removal of pipe scale, polishing of aqueous process fluids, alkalis, acids and solvents, filtration of emulsions and dispersions, gel removal from resins. Activated carbon or catalyst removal in the fine chemicals industry is a typical example of a demanding application in chemical processing. Eaton filter bags meet the application requirements for high-filtration efficiency, yet also offer long service life and reliability.
ElectronicsWafer and chip processing, electronic etching baths, photo-chemical polishing, and high-purity water filtration and pre-filtration of various membrane filtration processes to improve their cost-effectiveness. Eaton filter bags demons trate the required purity, efficiency and consistent performance.
Food and beverageFiltration of wine, spirits and beer, removal of particles from edible oils, removal of carbon black from cellulose, slime removal in gelatin, liquid sugar, thick juice, corn syrup polishing, starch processing, milk processing and soft drinks. Many Eaton filter bags conform to FDA and EEC food processing standards and can meet the unique and varied demands of these applications.
Metal workingFiltration of hydraulic oil, pre-treatment system filtration, precious metal recovery, metal working fluids and drawing compounds. Parts cleaning machines use our filter bags for minimizing residual dirt on parts.
Paint and lacquerRemoval of agglomerates, removal of paint coagulates, solvent filtration, removal of storage contaminants, filling lines, paint mixing lines and monomer purification.
PetrochemicalsFiltration of lube oils, fuel additives, enhanced oil recovery, filtration of amine solutions, filtration of glycol fluids, gas purification processes, distillation and cracking processes, amine washers, off-shore filter stations, oil drilling and injection fluids.
PharmaceuticalRecovery of expensive active ingredients, catalyst re covery, active carbon purification and removal, filtration of gelatin, hormones, vitamin extracts, polishing of herbal mixtures, protein removal from plasma, filtration of saline solutions.
Resins, plastics, inks and coatingsOil and polymer filtration, dispersions, polymerization batches, resins for can coatings, plastics compounding, printing ink, plastics processing, paper coatings, high-purity ink-jet fluid filtration.
Water treatmentWell water filtration, water treatment plants, silt removal, pipe scale removal, sand and algae removal from sea water, ion exchange resin recovery, calcium deposit removal, filtration of chemicals used for water treatment, dust removal from cooling tower installations. Surface water filtration is an area traditionally dominated by expensive cartridge filtration.
Applications
USEF-FBH-01
10-2014
Bag Filter Housings
World proven, cost-effective systemsfor bag filtration
PROLINE 100™ multi-bag filter housingsThe most competitively priced, 100 psi (6.9 bar), non-code housings that Eaton has to offer. Up to 8 filter bags per housing.
FLOWLINE II™ single bag filter housingsOne-piece body construction makes this the easy and economical choice for single bag filter housings.
MAXILINE™ multi-bag filter housingsHousings for high-volume applications demanding frequent filter bag change- outs. Up to 24 filter bags per housing.
ECOLINE™ single bag filter housingsLightweight design for commercial, OEM, non-hazardous, low pressure applications that do not requirea code stamp.
TOPLINE™ single bag filter housingsThe finest bag filter housing available. From its high- performance design to its investment-cast components.
POLYLINE™ single bag filter housingsRugged, all plastic housings meet the needs of ultra-pure or corrosive applications.
SIDELINE™ single bag filter housingsMid-priced housings are solid, investment-cast filters suitable for most applications.
MODULINE™ multi-bag filter housing systemContinuous filtration and larger flow rates in a flexible multi-bag filter housing system.
FLOWLINE™ single bag filter housingsVersatile, heavy-duty bag filter housings.
DUOLINE™ multi-bag filter housing systemContinuous filtration in a dual-housing configuration.
For more information, please email us at [email protected] or visit www.eaton.com/filtration
© 2014 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.
North America 44 Apple Street Tinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700
Europe/Africa/Middle East Auf der Heide 2 53947 Nettersheim, GermanyTel: +49 2486 809-0
Internormen Product Line Friedensstraße 41 68804 Altlußheim, GermanyTel: +49 6205 2094-0
Begerow Product LineAn den Nahewiesen 24 55450 Langenlonsheim, GermanyTel: +49 6704 204-0
ChinaNo. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. ChinaTel: +86 21 5200-0099
Singapore4 Loyang Lane #04-01/02 Singapore 508914Tel: +65 6825-1668
BrazilAv. Julia Gaioli, 474 – Bonsucesso 07251-500 – Guarulhos, BrazilTel: +55 11 2465-8822
8
The revolutionary QIC-LOCK opening mechanism is the answer to users’ demands who work in an environment where productivity and safety are the key priorities.
• QIC-LOCK opening mechanism is safe to use. An interlock prevents opening until the housing is entirely vented.
• QIC-LOCK opening mechanism is simple and fast to operate. Standing in place, the operator can rotate the hand wheel and open the cover. There is no requirement to have full movement and access around the housing or use any tools as with conventional bolted closures.
• QIC-LOCK opening mechanism has a rugged design, precision machining assures long life and repeatable operation. A special coating protects the spindle surface from wear and corrosion. The design is approved for all pressure housing design codes.
• QIC-LOCK opening mechanism doesn’t just make life easier for operators; there are significant cost benefits to be realized with greatly reduced downtime and lower maintenance costs.
1. Filter element change necessary – open the safety interlock to ensure simultaneous pressure relief.
2. Rotate the spindle using the hand wheel to open the V-clamp into the end position.
3. Open the cover aided by spring-assisted mechanism.
4. Change filter element.
5. Close the cover.
6. Close the V-clamp by rotation of the spindle.
Fast
Simple
Efficient
Economical
Safe
User- friendly
Durable
�Low Maintenance
Cost-effective
High Productivity
7. Close the safety interlock and the housing is ready to go back on-line.
Open and close your multi-bag filter housing in 30 seconds or less
QIC-LOCK™ Opening Mechanism
USEF-FBH-02
10-2014
ECOLINE™ Single Bag Filter Housing
MINILINE EBF single bag filter housing (available in EMEA)
This single bag filter housing is a highly cost-effective solution for price-sensitive applications and features a handy V-clamp closure and threaded couplings. Units come standard with filter bag size 01 or 02 stainless steel restrainer baskets. Sizes 03 and 04 available in EMEA.
Eaton’s ECOLINE single
bag filter housing is
a light-weight design
for commercial,
OEM, non-hazardous,
low-pressure applica-
tions that do not require
a code stamp.
Lightweight, economical single bag filter housing for commercial applications
Features � Side inlet with evacuation cover prevents spillage of unfiltered liquid, allowing for clean and easy filter bag change-outs � V-clamp cover closure is easy to operate, allowing cover to be removed or closed quickly � Compression hold down creates 360 degree sealing between the filter bag and the bag filter housing � Designed with a 1/4” thread port on the lid for vent or gauge � Smooth, bead-blasted finish makes it easy to completely clean the interior
Options � Available in 316 stainless steel for high corrosion resistance. 304 stainless steel version available in EMEA � Adjustable mounting legs for simplified installation �Multiple I/O connections to suit application
Unique, internal body-to-basket O-ringseal prevents bypass and is easy tomaintain
For more information, please email us at [email protected] or visit www.eaton.com/filtration
© 2014 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.
North America 44 Apple Street Tinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700
Europe/Africa/Middle East Auf der Heide 2 53947 Nettersheim, GermanyTel: +49 2486 809-0
Internormen Product Line Friedensstraße 41 68804 Altlußheim, GermanyTel: +49 6205 2094-0
Begerow Product LineAn den Nahewiesen 24 55450 Langenlonsheim, GermanyTel: +49 6704 204-0
ChinaNo. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. ChinaTel: +86 21 5200-0099
Singapore4 Loyang Lane #04-01/02 Singapore 508914Tel: +65 6825-1668
BrazilAv. Julia Gaioli, 474 – Bonsucesso 07251-500 – Guarulhos, BrazilTel: +55 11 2465-8822
8
Technical data
ModelsNo. of
filter bags SizeFlow rate1
GPM (m³/h)Max. pressure
psi (bar)Max. temp.
°F (°C)Housing volume
gal (l)Housing weight
lb (kg)I/O
connections
EBF-0101 1 1 88 (20) 100 (6) 250 (120) 4.1 (15.5) 25 (7.5) 2” thread
EBF-0102 1 2 176 (40) 100 (6) 250 (120) 7.1 (27.0) 38 (11.0) 2” thread
EBF-0103 1 3 26 (6) 150 (9) 250 (120) 0.8 (3.0) 9 (3.5) 1 1/2” thread
EBF-0104 1 4 53 (12) 150 (9) 250 (120) 1.2 (4.5) 11 (4.5) 1 1/2” thread 1 Maximum theoretical flow based on water viscosity, filter bag specific. 2 Depending on seal material. Metric measures represent comparable products produced for EMEA and may not be an exact conversion from inches.
ECOLINE Single Bag Filter Housing
Dimensions - inch (mm)
Models A B C D E
EBF-0101 22.88 (581) 7.68 (195) 19.64 (489) 5.37 (150) 37.00 (940)
EBF-0102 38.50 (977) 7.68 (195) 35.19 (884) 5.37 (150) 68.00 (1,727)
EBF-0103 14.56 (370) 4.50 (114) 11.81 (295) 3.50 (110) 24.00 (609)
EBF-0104 20.69 (525) 4.50 (114) 17.87 (454) 3.50 (110) 34.50 (876) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversion from inches.
ApplicationsCoarse filtration > 500 µm ✓
Medium filtration > 10 µm Fine filtration < 10 µm
Pre-filtration ✓
Safety filtration High volumeBatch filtration Circuit filtration Continuous filtration
Solvents, paints Fats and oils Catalyst, activated carbon Acids, bases Petrochemicals Water, waste water ✓
Chemical industry Pharmaceuticals Metal cleaning ✓
Automotive Electronics Food and beverage Paint and lacquer Water treatment ✓
Galvanic industry
E
C A
D
B
USEF-FBH-14
10-2014
This single bag filter housing’s lightweight but robust construction incorporates valuable features that heavy-duty applications demand. Units come standard with filter bag size 01 or 02 stainless steel restrainer baskets.
Features � Side inlet with evacuation cover prevents spillage of unfiltered liquid, allowing for clean and easy filter bag change-outs � Easy open cover features integral handle, 1/4” vent and gauge ports and “no tools” eye-bolt closures � Cover opening direction easily adapts to different piping layouts and adjusts in the field to accommodate walls, posts or other obstructions
Eaton’s FLOWLINE
single bag filter housing
is a versatile, heavy-duty,
cost-effective bag filter
housing and the best
choice for industrial,
commercial and OEM
applications that do not
require a code stamp.
Lightweight, cost- effective single bag filter housing meets a wide range of applications
FLOWLINE™ Single Bag Filter Housing
Ergonomic, integral cover handle is easy to open and close
Compression bag hold down creates 360 degree sealing between filter bag and bag filter housing
Options � Available in 316 stainless steel for high corrosion resistance or carbon steel. 316 Ti stainless steel version available in EMEA � Buna-N® O-rings for the cover are standard. EPDM or Viton® seals and gaskets are available �Multiple I/O connections to suit application
Viton® is a registered trademark of E. I. du Pont de Nemours and company.
� Fabricated construction provides a cost-effective, lighter weight alternative to cast bag filter housings � Adjustable mounting legs for simplified installation � Ergonomic, integral cover handle is easy to open � Smooth, bead-blasted finish, coupled with a minimum number of welds makes it easy to completely clean the interior � Standard design available with threaded or flanged connections
For more information, please email us at [email protected] or visit www.eaton.com/filtration
© 2014 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.
North America 44 Apple Street Tinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700
Europe/Africa/Middle East Auf der Heide 2 53947 Nettersheim, GermanyTel: +49 2486 809-0
Internormen Product Line Friedensstraße 41 68804 Altlußheim, GermanyTel: +49 6205 2094-0
Begerow Product LineAn den Nahewiesen 24 55450 Langenlonsheim, GermanyTel: +49 6704 204-0
ChinaNo. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. ChinaTel: +86 21 5200-0099
Singapore4 Loyang Lane #04-01/02 Singapore 508914Tel: +65 6825-1668
BrazilAv. Julia Gaioli, 474 – Bonsucesso 07251-500 – Guarulhos, BrazilTel: +55 11 2465-8822
8
FLOWLINE Single Bag Filter Housing
ApplicationsCoarse filtration > 500 µm ✓
Medium filtration > 10 µm Fine filtration < 10 µm
Pre-filtration ✓
Safety filtration High volumeBatch filtration ✓
Circuit filtration Continuous filtration
Solvents, paints Fats and oils Catalyst, activated carbon Acids, bases Petrochemicals Water, waste water ✓
Chemical industry Pharmaceuticals Metal cleaning ✓
Automotive Electronics Food and beverage Paint and lacquer Water treatment ✓
Galvanic industry
G
E C
A
D
B
F
Technical data
ModelsNo. of
filter bags SizeFlow rate1
GPM (m³/h)Max. pressure
psi (bar)Max. temp.
°F (°C)Housing volume
gal (l)Housing weight
lb (kg)I/O
connections
FBF-0101 1 01 88 (20) 150 (10) 250 (120) 4 (15.5) 30 (13.6) 2” thread
FBF-0102 1 02 176 (40) 150 (10) 250 (120) 7 (27.0) 43 (19.5) 2” thread
FBF-0101 1 01 88 (20) 150 (10) 250 (120) 4 (15.5) 40 (21.5) 2” flange
FBF-0102 1 02 176 (40) 150 (10) 250 (120) 7 (27.0) 53 (27.0) 2” flange
FBF-0102* 1 02 176 (40) 150 (10) 250 (120) 7 (27.0) 61 (27.6) 3” flange 1 Maximum theoretical flow based on water viscosity, filter bag specific. Metric measures represent comparable products produced for EMEA and may not be an exact conversions. * Available in the US only.
Dimensions - inch (mm)
Models A B C D E F G
FBF-0101 5.37 (136) 19.64 (499) 26.38 (670) 10.42 (265) 37.00 (939) 19.10 (485) 7.68 (195)
FBF-0102 5.37 (136) 35.19 (894) 41.68 (1,059) 10.42 (265) 67.75 (1,708) 19.10 (485) 7.68 (195)
FBF-0101 6.70 (150) 20.78 (487) 27.62 (701) 11.75 (299) 38.00 (965) 19.10 (485) 7.68 (195)
FBF-0102 6.70 (150) 36.31 (882) 42.88 (1,089) 11.75 (299) 69.00 (1,753) 19.10 (485) 7.68 (195)
FBF-0102* 8.00 (203) 37.19 (945) 43.79 (1,112) 13.07 (332) 70.20 (1,783) 19.10 (485) 7.68 (195) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversion from inches.
USEF-FBH-12
10-2014
FLOWLINE II™ Single Bag Filter Housing
Unique, internal body-to-basket O-ring seal prevents bypass and is easy to maintain
This single bag filter housing features a unique one-piece body design that eliminates the traditional body-to-bottom cap circumferential weld. Units come standard with filter bag size 01 or 02 stainless steel restrainer baskets.
Features � Side inlet with evacuation cover prevents spillage of unfiltered liquid, allowing for clean and easy filter bag change-outs � Easy open cover features integral handle, 1/4” vent and gauge ports and “no tools” eye-bolt closures � 316 stainless steel support basket
Eaton’s FLOWLINE II
single bag filter housing
offers the most cost-
effective solution to
single bag filter housing
requirements.
One-piece body construction is the easy and economical choice for single bag filter housing applications
Options � Available in 304 or 316 stainless steel for high corrosion resistance or carbon steel � Available in three configu-rations: side in and bottom out; side in and side out on opposite sides for in-line piping; or side in and side out on the same side for loop design layouts or duplexing � End connection options include 2” NPT or 2” 150# RF flanged. The size 02 unit is also available with 3” 150# RF flanges in the side in/side out and loop configuration as well as bottom out configuration
Available in the US only. Kynar® is a registered trademark of Arkema Inc.
� Adjustable mounting legs for simplified installation � Kynar® compression ring provides an advanced, long-term solution for securing the filter media and support basket into the enclosure � Buna-N® O-ring seals for cover and basket � Bead-blast, external finish is standard for stainless steel construction. Shop paint is standard for carbon steel construction
For more information, please email us at [email protected] or visit www.eaton.com/filtration
© 2014 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.
North America 44 Apple Street Tinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700
Europe/Africa/Middle East Auf der Heide 2 53947 Nettersheim, GermanyTel: +49 2486 809-0
Internormen Product Line Friedensstraße 41 68804 Altlußheim, GermanyTel: +49 6205 2094-0
Begerow Product LineAn den Nahewiesen 24 55450 Langenlonsheim, GermanyTel: +49 6704 204-0
ChinaNo. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. ChinaTel: +86 21 5200-0099
Singapore4 Loyang Lane #04-01/02 Singapore 508914Tel: +65 6825-1668
BrazilAv. Julia Gaioli, 474 – Bonsucesso 07251-500 – Guarulhos, BrazilTel: +55 11 2465-8822
8
FLOWLINE II Single Bag Filter Housing
Technical data
ModelsNo. of
filter bags SizeFlow rate1
GPM (m³/h)Max. pressure
psi (bar)Max. temp.
°F (°C)Housing volume
gal (l)Housing weight
lb (kg)I/O
connections
SBL101__020N 1 01 88 (20) 150 (10) 250 (120) 4 (15.5) 37 (16.8) 2” thread
SBL102__020N 1 02 176 (40) 150 (10) 250 (120) 7 (27.0) 50 (22.7) 2” thread
SBL101__020A 1 01 88 (20) 150 (10) 250 (120) 4 (15.5) 37 (16.8) 2” flange
SBL102__020A 1 02 176 (40) 150 (10) 250 (120 7 (27.0) 50 (22.7) 2” flange
SBL102__030A 1 02 176 (40) 150 (10) 250 (120) 7 (27.0) 69 (31.4) 3” flange 1 Maximum theoretical flow based on water viscosity, filter bag specific.
Dimensions - inch (mm)
Models A B C D E F G
SBL101__020N 4.80 (122) 18.39 (467) 25.25 (641) 9.88 (251) 35.55 (903) 19.10 (485) 7.68 (195)
SBL102__020N 4.80 (122) 33.55 (852) 40.41 (1,026) 9.88 (251) 66.50 (1,689) 19.10 (485) 7.68 (195)
SBL101__020A 6.84 (174) 19.67 (500) 26.54 (674) 11.92 (303) 34.44 (875) 19.10 (485) 7.68 (195)
SBL102__020A 6.84 (174) 34.83 (885) 41.70 (1,059) 11.92 (303) 67.52 (1,715) 19.10 (485) 7.68 (195)
SBL102__030A 7.98 (180) 35.30 (897) 41.93 (1,065) 12.15 (309) 68.31 (1,735) 19.10 (485) 7.68 (195) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversion from inches.
G
E C
A
D
B
F
USEF-FBH-13
10-2014
ApplicationsCoarse filtration > 500 µm ✓
Medium filtration > 10 µm Fine filtration < 10 µm
Pre-filtration ✓
Safety filtration High volumeBatch filtration ✓
Circuit filtration Continuous filtration
Solvents, paints Fats and oils Catalyst, activated carbon Acids, bases Petrochemicals Water, waste water ✓
Chemical industry Pharmaceuticals Metal cleaning ✓
Automotive Electronics Food and beverage Paint and lacquer Water treatment ✓
Galvanic industry
POLYLINE™ Single Bag Filter Housing
PPL/PVDF models feature external cover threads
This single bag filter housing has no metal components to rust, corrode or contaminate the process media and is ideal for contamination sensitive or severely corrosive applications. Units come standard with filter bag size 01 or 02 polypropylene or size 02 PVDF restrainer baskets.
Features � All plastic construction with smooth interior surfaces makes it easy to clean � Compression hold down creates 360 degree sealing between the filter bag and the bag filter housing
Eaton’s POLYLINE single
bag filter housing is
an all-plastic, rugged
polypropylene or PVDF
construction for superior
corrosion resistance.
The glass fiber
reinforced polypropylene
withstands high-pressure
and temperature
combinations.
Choice of PPL or PVDF construction for ultra-pure or corrosive applications
� Removable, “no tools required” spin-off cover for quick filter bag change-outs. Just a few turns of the cover using the built-in handle and the housing opens and closes with little effort � Standard design available with threaded or flanged connections � Vent/bleed valve installed on the housing cover and an integral mounting flange for rock-solid installation without the need for support legs � Dual outlets allow either in-line or loop piping connections with other outlet used as a drain
Options � Available in glass fiber reinforced polypropylene or PVDF � Viton® seals and gaskets for the cover and restrainer basket are standard. EPDM seals and gaskets are available �Multiple I/O connections to suit application � Round bottom restrainer basket size 01 or 02 available in polypropylene
Viton® is a registered trademark of E. I. du Pont de Nemours and company.
For more information, please email us at [email protected] or visit www.eaton.com/filtration
© 2014 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.
North America 44 Apple Street Tinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700
Europe/Africa/Middle East Auf der Heide 2 53947 Nettersheim, GermanyTel: +49 2486 809-0
Internormen Product Line Friedensstraße 41 68804 Altlußheim, GermanyTel: +49 6205 2094-0
Begerow Product LineAn den Nahewiesen 24 55450 Langenlonsheim, GermanyTel: +49 6704 204-0
ChinaNo. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. ChinaTel: +86 21 5200-0099
Singapore4 Loyang Lane #04-01/02 Singapore 508914Tel: +65 6825-1668
BrazilAv. Julia Gaioli, 474 – Bonsucesso 07251-500 – Guarulhos, BrazilTel: +55 11 2465-8822
8
Technical data
ModelsNo. of
filter bags SizeFlow rate1
GPM (m³/h)Max. pressure
psi (bar)Max. temp.
°F (°C)Housing volume
gal (l)Housing weight
lb (kg)I/O
connections
PBF-0101 (thread) 1 1 88 (20) 150 @ 70 ° F (10 @ 21 °C) 240 @ 70 psi (115 @ 4.8 bar) 9.5 (36) 49 (22.3) 2” thread
PBF-0102 (thread) 1 2 176 (40) 150 @ 70 °F (10 @ 21 °C) 240 @ 70 psi (115 @ 4.8 bar) 9.5 (36) 63 (28.6) 2” thread
PBF-0101 (flange) 1 1 88 (20) 150 @ 70 °F (10 @ 21 °C) 240 @ 70 psi (115 @ 4.8 bar) 6.6 (25) 53 (24.0) 2” flange
PBF-0102 (flange) 1 2 176 (40) 150 @ 70 °F (10 @ 21 °C) 240 @ 70 psi (115 @ 4.8 bar) 9.5 (36) 66 (30.0) 2” flange
1 Maximum theoretical flow based on water viscosity, filter bag specific. 2 Depending on seal material. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.
POLYLINE Single Bag Filter Housing
Dimensions - inch (mm)
Models A B C D E F G H
PBF-0101 (thread) 6.50 (165) 10.00 (254) 3.25 (83) 34.12 (867) 20.00 (508) 18.38 (467) 6.13 (156) 23.88 (607)
PBF-0102 (thread) 6.50 (165) 10.00 (254) 3.25 (83) 50.12 (1,273) 36.00 (914) 18.38 (467) 6.13 (156) 39.88 (1,013)
PBF-0101 (flange) 5.69 (145) 10.00 (254) 3.25 (83) 34.12 (867) 20.00 (508) 18.38 (467) 8.63 (219) 23.88 (607)
PBF-0102 (flange) 5.69 (145) 10.00 (254) 3.25 (83) 50.12 (1,273) 36.00 (914) 18.38 (467) 8.63 (219) 39.88 (1,013) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.
ApplicationsCoarse filtration > 500 µm ✓
Medium filtration > 10 µm ✓
Fine filtration < 10 µm
Pre-filtration ✓
Safety filtration High volumeBatch filtration ✓
Circuit filtration ✓
Continuous filtration
Solvents, paints Fats and oils Catalyst, activated carbon Acids, bases ✓
Petrochemicals Water, waste water ✓
Chemical industry ✓
Pharmaceuticals Metal cleaning Automotive Electronics ✓
Food and beverage Paint and lacquer Water treatment ✓
Galvanic industry ✓
°
°
psi
B
(clearance) E
C
A
F
H
D
G
Operating temperature/pressure for POLYLINE
single bag filter housings
B
E (clearance)
C
A
F
H
D
G
USEF-FBH-15
10-2014
SIDELINE™ Single Bag Filter Housing
MINILINE SBF(available EMEA only)
This single bag filter housing is a solid, investment-cast filter. Units come standard with filter bag size 01 or 02 stainless steel restrainer baskets. Sizes 03 and 04 available in EMEA.
Features � Side inlet with evacuation cover prevents spillage of unfiltered liquid, allowing for clean and easy filter bag change-outs � Cover opening direction easily adapts to different piping layouts and adjusts in the field to accommodate walls, posts or other obstructions � Compression hold down creates 360 degree sealing between the filter bag and the bag filter housing
� Ergonomic, integral cover handle is easy to open � Standard design available with threaded or flanged connections � Smooth, bead-blasted finish, coupled with a minimum two-weld design makes it easy to completely clean the interior � Designed in accordance with Section VIII, Division 1 of the ASME Code (standard in the US), “AD 2000-Merkblätter”, EN 13445 and PED (standard in EMEA)
Options � Available in 316 stainless steel for high corrosion resistance. 316 Ti stainless steel version available in EMEA �Magnetic inserts to collect metallic chips, fines and dust for sizes 01 and 02 � Buna-N® O-rings for the cover are standard. EPDM, Viton®, PTFE encapsulated Viton or silicone rubber seals and gaskets are available �Multiple I/O connections to suit application � Available with eye-bolt closure or T-bolt closure for faster maintenance
Viton® is a registered trademark of E. I. du Pont de Nemours and company.
Eaton’s SIDELINE
single bag filter housing
is a mid-priced bag filter
housings for most
industrial applications.
Reliable, mid-priced filter housing for most applications
Ergonomic, integral cover handle is easy to open and close
Compression bag hold down creates 360 degree sealing between filter bag and bag filter housing
For more information, please email us at [email protected] or visit www.eaton.com/filtration
© 2014 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.
North America 44 Apple Street Tinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700
Europe/Africa/Middle East Auf der Heide 2 53947 Nettersheim, GermanyTel: +49 2486 809-0
Internormen Product Line Friedensstraße 41 68804 Altlußheim, GermanyTel: +49 6205 2094-0
Begerow Product LineAn den Nahewiesen 24 55450 Langenlonsheim, GermanyTel: +49 6704 204-0
ChinaNo. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. ChinaTel: +86 21 5200-0099
Singapore4 Loyang Lane #04-01/02 Singapore 508914Tel: +65 6825-1668
BrazilAv. Julia Gaioli, 474 – Bonsucesso 07251-500 – Guarulhos, BrazilTel: +55 11 2465-8822
8
Technical data
ModelsNo. of
filter bags SizeFlow rate1
GPM (m³/h)Max. pressure
psi (bar)Max. temp.
°F (°C)Housing volume
gal (l)Housing weight
lb (kg)I/O
connections
SBF-0101 1 1 88 (20) 150 (10) 400 (160) 4.75 (18) 84.0 (38.1) 2” flange
SBF-0102 1 2 176 (40) 150 (10) 400 (160) 8.45 (32) 102.0 (46.3) 2” flange
SBF-0103* 1 3 26 (6) 300 (16) 225 (160) 0.79 (3) 24.0 (12.0) 1½” thread
SBF-0104* 1 4 53 (12) 300 (16) 225 (160) 1.19 (4.5) 26.0 (13.0) 1½” thread
TSBF-0101* 1 1 88 (20) 150 (6) 400 (160) 4.75 (18) 84.0 (38.1) 2” flange
TSBF-0102* 1 2 176 (40) 150 (6) 400 (160) 8.45 (32) 102.0 (46.3) 2” flange
TSBF-0103* 1 3 26 (6) 300 (16) 225 (160) 0.79 (3) 24.0 (12.0) 1½” thread
TSBF-0104* 1 4 53 (12) 300 (16) 225 (160) 1.19 (4.5) 26.0 (13.0) 1½” thread 1 Maximum theoretical flow based on water viscosity, filter bag specific. Metric measures represent comparable products produced for EMEA and may not be an exact conversions. * Available in EMEA only.
SIDELINE Single Bag Filter Housing
Dimensions - inch (mm)
Model A B C D E G
SBF-0101 8.66 (220) 19.50 (495) 26.62 (676) 14.38 (365) 38.00 (965) 8.62 (219)
SBF-0102 8.66 (220) 35.00 (889) 42.12 (1,070) 14.38 (365) 69.00 (1,753) 8.62 (219)
SBF-0103* 3.50 (110) 11.81 (300) 18.12 (460) 7.48 (190) 23.00 (584) 4.49 (114)
SBF-0104* 3.50 (110) 17.87 (454) 24.25 (616) 7.48 (190) 34.50 (876) 4.49 (114)
TSBF-0101* 8.66 (220) 19.49 (495) 23.62 (600) 13.50 (343) 32.48 (825) 8.62 (219)
TSBF-0102* 8.66 (220) 35.04 (890) 39.17 (995) 13.50 (343) 48.03 (1,220) 8.62 (219)
TSBF-0103* 4.33 (110) 11.81 (300) 15.51 (394) 8.66 (220) 19.06 (484) 4.49 (114)
TSBF-0104* 4.33 (110) 17.91 (455) 21.65 (550) 8.66 (220) 25.20 (640) 4.49 (114) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversion from inches.
ApplicationsCoarse filtration > 500 µm ✓
Medium filtration > 10 µm ✓
Fine filtration < 10 µm
Pre-filtration ✓
Safety filtration ✓
High volumeBatch filtration ✓
Circuit filtration ✓
Continuous filtration
Solvents, paints ✓
Fats and oils ✓
Catalyst, activated carbon Acids, bases ✓
Petrochemicals ✓
Water, waste water ✓
Chemical industry ✓
Pharmaceuticals Metal cleaning ✓
Automotive Electronics Food and beverage ✓
Paint and lacquer ✓
Water treatment ✓
Galvanic industry ✓
G
E C
A
D
B
USEF-FBH-11
10-2014
TOPLINE™ Single Bag Filter Housing
Eaton’s TOPLINE single bag filter housing is the best bag filter housing for the most demanding applications and features easy filter bag change-outs as well as providing optimum sealing of the filter bag.
This single bag filter housing is simply the best, from its high-performance design to its heavy-duty investment-cast components. Units come standard with filter bag size 01 or 02 stainless steel restrainer baskets.
The best single bag filter housing for the most demanding applications
Features � Top inlet requires less headroom and allows liquid flow through the cover, improves sealing, reduces product loss and makes filter bag change-outs cleaner � Smooth, bead-blasted finish, coupled with a minimum two-weld design makes it easy to completely clean the interior � Adjustable mounting legs for simplified installation � Designed in accordance with Section VIII, Division 1 of the ASME Code (standard in the US), “AD 2000-Merkblätter”, EN 13445 and PED (standard in EMEA)
Options � Available in carbon steel or 316 stainless steel for high corrosion resistance. 316 Ti stainless steel version available in EMEA �Magnetic inserts to collect metallic chips, fines and dust for sizes 01 and 02 � Buna-N® O-rings for the cover are standard. EPDM, Viton®, PTFE encapsulated Viton or silicone rubber seals and gaskets are available �Multiple I/O connections to suit application � Available with eye-bolt closure or T-bolt closure for faster maintenance
Viton® is a registered trademark of E. I. du Pont de Nemours and company.
Top inlet connection with hinged cover make filter bag change-outs quick and easy
For more information, please email us at [email protected] or visit www.eaton.com/filtration
© 2014 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.
North America 44 Apple Street Tinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700
Europe/Africa/Middle East Auf der Heide 2 53947 Nettersheim, GermanyTel: +49 2486 809-0
Internormen Product Line Friedensstraße 41 68804 Altlußheim, GermanyTel: +49 6205 2094-0
Begerow Product LineAn den Nahewiesen 24 55450 Langenlonsheim, GermanyTel: +49 6704 204-0
ChinaNo. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. ChinaTel: +86 21 5200-0099
Singapore4 Loyang Lane #04-01/02 Singapore 508914Tel: +65 6825-1668
BrazilAv. Julia Gaioli, 474 – Bonsucesso 07251-500 – Guarulhos, BrazilTel: +55 11 2465-8822
8
Technical data
ModelsNo. of
filter bags SizeFlow rate1
GPM (m³/h)Max. pressure
psi (bar)Max. temp.
°F (°C)Housing volume
gal (l)Housing weight
lb (kg)I/O
connections
TBF-0101 1 1 88 (20) 150 (10) 400 (160) 3.5 (13.0) 80 (36) 2”
TBF-0102 1 2 176 (40) 150 (10) 400 (160) 7.25 (27.5) 93 (42) 2”
TTBF-0101* 1 1 88 (20) 150 (10) 400 (160) 3.5 (13.0) 80 (36) 2”
TTBF-0102* 1 2 176 (40) 150 (10) 400 (160) 7.25 (27.5) 93 (42) 2” 1 Maximum theoretical flow based on water viscosity, filter bag specific. Metric measures represent comparable products produced for EMEA and may not be an exact conversions. * Available in EMEA only.
TOPLINE Single Bag Filter Housing
Dimensions - inch (mm)
Models A B C D E F G
TBF-0101 12.10 (307) 15.50 (395) 21.25 (540) 19.10 (486) 32.00 (813) 19.25 (489) 8.62 (219)
TBF-0102 12.10 (307) 31.00 (790) 36.75 (934) 19.10 (486) 63.00 (1,600) 19.25 (489) 8.62 (219)
TTBF-0101* 13.78 (350) 14.76 (375) 22.44 (570) 19.69 (500) 34.72 (882) 24.41 (620) 8.62 (219)
TTBF-0102* 13.78 (350) 29.53 (750) 37.17 (944) 19.69 (500) 49.09 (1,247) 24.41 (620) 8.62 (219) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversion from inches.
ApplicationsCoarse filtration > 500 µm Medium filtration > 10 µm ✓
Fine filtration < 10 µm ✓
Pre-filtration ✓
Safety filtration ✓
High volumeBatch filtration ✓
Circuit filtration ✓
Continuous filtration
Solvents, paints ✓
Fats and oils ✓
Catalyst, activated carbon ✓Acids, bases ✓
Petrochemicals ✓
Water, waste water ✓
Chemical industry ✓
Pharmaceuticals ✓
Metal cleaning Automotive ✓
Electronics ✓
Food and beverage ✓
Paint and lacquer ✓
Water treatment ✓
Galvanic industry ✓
G
E
A
D
B
F
C
USEF-FBH-10
10-2014
MAXILINE™ VMBF Multi-Bag Filter Housing
This multi-bag filter housing is equipped with the QIC-LOCK™ opening mechanism. Units are available in 4, 6, 8, 10 and 12 filter bag configurations and come standard with filter bag size 02 stainless steel restrainer baskets.
Features � Low profile design with side inlet and tangential outlet provides easy and full drainage and reduces housing height to make filter bag change-outs easier. No need for ladders, stools or catwalks � Positive O-ring sealing provides bypass-free, safe filtration while the unique 3-point hold down ensures a high-quality seal between each filter bag and the housing body
Eaton’s MAXILINE
VMBF multi-bag filter
housing is user-friendly,
cost-effective and
designed for high
volume applications and
processes demanding
frequent filter bag
change-outs. Ideal for
batch process runs
and high dirt load
applications.
Designed for high capacity and easy, safe change-outs
� QIC-LOCK opening mechanism allows for safe, easy and fast filter bag change-outs for higher productivity and lower operating costs. Ideal for processes requiring frequent filter bag changes such as batch applications � Automatic safety interlock for venting housing (cover cannot be opened if housing is under pressure) � A counter-balanced, spring-assisted cover lifting mechanism allows for quick and easy opening of even large covers by one person � Heavy-duty stainless steel mounting legs are included � Designed in accordance with Section VIII, Division 1 of the ASME Code (standard in the US), “AD 2000-Merkblätter”, EN 13445 and PED (standard in EMEA)
Options
� Available in 304 or 316 stainless steel for high corrosion resistance � Buna N® O-rings for the cover are standard. EPDM, Viton® or silicone rubber seals and gaskets are available �Multiple I/O connections to suit application
Viton® is a registered trademark of E. I. du Pont de Nemours and company.
QIC-LOCK rapid opening mechanism ensures simple, operator-friendly, and safe operation with minimal downtime to increase productivity and decrease running costs
For more information, please email us at [email protected] or visit www.eaton.com/filtration
© 2014 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.
North America 44 Apple Street Tinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700
Europe/Africa/Middle East Auf der Heide 2 53947 Nettersheim, GermanyTel: +49 2486 809-0
Internormen Product Line Friedensstraße 41 68804 Altlußheim, GermanyTel: +49 6205 2094-0
Begerow Product LineAn den Nahewiesen 24 55450 Langenlonsheim, GermanyTel: +49 6704 204-0
ChinaNo. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. ChinaTel: +86 21 5200-0099
Singapore4 Loyang Lane #04-01/02 Singapore 508914Tel: +65 6825-1668
BrazilAv. Julia Gaioli, 474 – Bonsucesso 07251-500 – Guarulhos, BrazilTel: +55 11 2465-8822
8
Technical data
ModelsNo. of
filter bags SizeFlow rate1
GPM (m³/h)Max. pressure
psi (bar)Max. temp.
°F (°C)Housing volume
gal (l)Housing weight
lb (kg)I/O
connections
VMBF-0402 4 2 705 (160) 150 (10) 250 (121) 69 (261) 484 (220) 4”
VMBF-0602* 6 2 1,057 (240) 150 (10) 250 (121) 139 (526) 920 (417) 6”
VMBF-0802 8 2 1,409 (320) 150 (10) 250 (121) 141 (534) 970 (440) 8”
VMBF-1002* 10 2 1,761 (400) 150 (10) 250 (121) 248 (939) 1,050 (476) 10”
VMBF-1202 12 2 2,114 (480) 150 (10) 250 (121) 248 (939) 1,070 (485) 10” 1 Maximum theoretical flow based on water viscosity, filter bag specific. Metric measures represent comparable products produced for EMEA and may not be an exact conversions. * Available in the US only.
MAXILINE VMBF Multi-Bag Filter Housing
Dimensions - inch (mm)
Models A B C D E F
VMBF-0402 6.00 (152) 20.00 (508) 10.47 (266) 22.00 (559) 15.75 (400) 68.00 (1,727)
VMBF-0602* 7.25 (184) 20.00 (508) 12.78 (325) 31.50 (800) 20.50 (521) 82.00 (2,083)
VMBF-0802 8.25 (210) 19.00 (483) 12.78 (325) 31.50 (800) 20.50 (521) 82.00 (2,083)
VMBF-1002* 10.00 (254) 19.00 (483) 14.37 (365) 38.00 (965) 25.00 (635) 92.00 (2,337)
VMBF-1202 10.00 (254) 19.00 (483) 14.37 (365) 38.00 (965) 25.00 (635) 92.00 (2,337) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. The 8 bag loop style dimensions are available on the Eaton website. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.
ApplicationsCoarse filtration > 500 µm ✓
Medium filtration >10 µm ✓
Fine filtration < 10 µm ✓
Pre-filtration ✓
Safety filtration ✓
High volume ✓
Batch filtration ✓
Circuit filtration ✓
Continuous filtration
Solvents, paints ✓
Fats and oils ✓
Catalyst, activated carbon Acids, bases ✓
Petrochemicals ✓
Water, waste water ✓
Chemical industry ✓
Pharmaceuticals Metal cleaning ✓
Automotive ✓
Electronics Food and beverage Paint and lacquer ✓
Water treatment ✓
Galvanic industry
A
E E
D
B
CF
USEF-FBH-05
10-2014
MAXILINE™ MBF Multi-Bag Filter Housing
Unique 3-point hold down ensures a high-quality seal between each filter bag and housing body
This multi-bag filter housing is equipped with proven and easy-to-use rugged eye-bold cover closure. The housing volume is optimized to minimize product loss. Units are available in 3, 4, 6 and 8 filter bag configurations and come standard with filter bag size 02 stainless steel restrainer baskets.
Features � Low profile design with side inlet and tangential outlet provides easy and full drainage and reduces housing height to make filter bag change-outs easier. No need for ladders, stools or catwalks
Eaton’s MAXILINE MBF multi-bag filter housing
is user-friendly, cost-
effective and designed
for high volume,
multiple applications and
processes.
Rugged design offers many options to meet demanding specifications
� Positive O-ring sealing provides bypass-free, safe filtration while the unique 3-point hold down ensures a high-quality seal between each filter bag and the housing body � A counter-balanced, spring-assisted cover lifting mechanism allows for quick and easy opening of even large covers by one person � Heavy-duty stainless steel mounting legs are included � Designed in accordance with Section VIII, Division 1 of the ASME Code (standard in the US), “AD 2000-Merkblätter”, EN 13445 and PED (standard in EMEA)
Options � Available in 304 or 316 stainless steel for high corrosion resistance. Carbon steel version available in North America � Buna-N® O-rings for the cover are standard. EPDM, Viton®, PTFE encapsulated Viton or silicone rubber seals and gaskets are available �Multiple I/O connections to suit application � Available with segment clamps � Custom fittings, surface finishes, coatings and design code ratings to meet specified applications � Available with shell side outlet
Viton® is a registered trademark of E. I. du Pont de Nemours and company.
For more information, please email us at [email protected] or visit www.eaton.com/filtration
© 2014 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.
North America 44 Apple Street Tinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700
Europe/Africa/Middle East Auf der Heide 2 53947 Nettersheim, GermanyTel: +49 2486 809-0
Internormen Product Line Friedensstraße 41 68804 Altlußheim, GermanyTel: +49 6205 2094-0
Begerow Product LineAn den Nahewiesen 24 55450 Langenlonsheim, GermanyTel: +49 6704 204-0
ChinaNo. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. ChinaTel: +86 21 5200-0099
Singapore4 Loyang Lane #04-01/02 Singapore 508914Tel: +65 6825-1668
BrazilAv. Julia Gaioli, 474 – Bonsucesso 07251-500 – Guarulhos, BrazilTel: +55 11 2465-8822
8
Technical data
ModelsNo. of
filter bags SizeFlow rate1
GPM (m³/h)Max. pressure
psi (bar)Max. temp.
°F (°C)Housing volume
gal (l)Housing weight
lb (kg)I/O
connections
MBF-0302* 3 2 528 (120) 150 (10) 250 (121) 40 (151) 460 (227) 3”
MBF-0402 4 2 705 (160) 150 (10) 250 (121) 69 (261) 615 (279) 4”
MBF-0602* 6 2 1,057 (240) 150 (10) 250 (121) 90 (341) 810 (367) 6”
MBF-0802 8 2 1,409 (320) 150 (10) 250 (121) 116 (439) 970 (440) 8” 1 Maximum theoretical flow based on water viscosity, filter bag specific. Metric measures represent comparable products produced for EMEA and may not be an exact conversions. * Available in the US only.
MAXILINE MBF Multi-Bag Filter Housing
Dimensions - inch (mm)
Models A B C D E F
MBF-0302* 6.00 (152) 22.50 (572) 6.43 (163) 18.00 (457) 12.75 (324) 60.00 (1,524)
MBF-0402 6.00 (152) 22.19 (564) 7.93 (201) 24.00 (610) 16.00 (406) 70.00 (1,778)
MBF-0602* 7.00 (178) 20.00 (508) 9.81 (249) 26.00 (660) 18.50 (470) 74.00 (1,880)
MBF-0802 8.25 (210) 19.00 (483) 10.81 (275) 30.00 (762) 20.50 (521) 79.50 (2,019) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. The 8 bag loop style dimensions are available on the Eaton website. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.
ApplicationsCoarse filtration > 500 µm ✓
Medium filtration > 10 µm ✓
Fine filtration < 10 µm ✓
Pre-filtration ✓
Safety filtration ✓
High volume ✓
Batch filtration ✓
Circuit filtration ✓
Continuous filtration
Solvents, paints ✓
Fats and oils ✓
Catalyst, activated carbon Acids, bases ✓
Petrochemicals ✓
Water, waste water ✓
Chemical industry ✓
Pharmaceuticals Metal cleaning ✓
Automotive ✓
Electronics Food and beverage Paint and lacquer ✓
Water treatment ✓
Galvanic industry
USEF-FBH-06
10-2014
MAXILINE™ VMDE Multi-Bag Filter Housing
Eaton’s MAXILINE VMDE multi-bag filter housing is user-friendly, seals perfectly and is designed for safe filtration and minimized product loss. Ideal for batch processes which demand the highest quality of filtration.
This multi-bag filter housing is equipped with the QIC-LOCK™ opening mechanism. The flat lid construction, combined with Eaton’s SENTINEL® filter bag seal rings, seal perfectly against the lid and minimize the amount of residual product on the inner surface. This reduces product loss, spillage and makes cleaning easier. Units are available in 4 filter bag configuration and come standard with filter bag size 02 stainless steel restrainer baskets.
Features � QIC-LOCK opening mechanism allows for safe, easy and fast filter bag change-outs for higher productivity and lower operating costs. Ideal for processes requiring frequent filter bag changes such as batch applications
Designed for easy, safe filter bag change-outs with minimal product loss
� Automatic safety interlock for venting housing (cover cannot be opened if housing is under pressure) � A counter-balanced, spring-assisted cover lifting mechanism allows for quick and easy opening of even large covers by one person � Flat lid design improves sealing, reduces product loss and makes filter bag change-outs cleaner � Direct feeding of filter bags via individual inlets generates a laminar flow. This ensures optimal cake formation to further improve filtration performance � Heavy-duty stainless steel mounting legs are included � Designed in accordance with Section VIII, Division 1 of the ASME Code (standard in the US), “AD 2000-Merkblätter”, EN 13445 and PED (standard in EMEA)
Options � Available in 304 or 316 stainless steel for high corrosion resistance � Four bag filter housing for size 01 and 02 filter bags � Buna-N® O-rings for the cover are standard. EPDM, Viton®, PTFE encapsulated Viton or silicone rubber seals and gaskets are available �Multiple I/O connections to suit application � Low profile design with side inlet and tangential outlet provides easy and full drainage and reduces housing height to make filter bag change-outs easier. No need for ladders, stools or catwalks
Available in the EMEA only. Viton® is a registered trademark of E. I. du Pont de Nemours and company.
SENTINEL filter bags utilize a pressure acti-vated sealing lip, which responds to increases in differential pressure
For more information, please email us at [email protected] or visit www.eaton.com/filtration
© 2014 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.
North America 44 Apple Street Tinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700
Europe/Africa/Middle East Auf der Heide 2 53947 Nettersheim, GermanyTel: +49 2486 809-0
Internormen Product Line Friedensstraße 41 68804 Altlußheim, GermanyTel: +49 6205 2094-0
Begerow Product LineAn den Nahewiesen 24 55450 Langenlonsheim, GermanyTel: +49 6704 204-0
ChinaNo. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. ChinaTel: +86 21 5200-0099
Singapore4 Loyang Lane #04-01/02 Singapore 508914Tel: +65 6825-1668
BrazilAv. Julia Gaioli, 474 – Bonsucesso 07251-500 – Guarulhos, BrazilTel: +55 11 2465-8822
8
Technical data
ModelsNo. of
filter bags SizeFlow rate1
GPM (m³/h)Max. pressure
psi (bar)Max. temp.
°F (°C)Housing volume
gal (l)Housing weight
lb (kg)I/O
connections
VMDE-0402 bottom outlet 4 2 705 (160) 150 (10) 248 (120) 49 (185) 485 (220) DN 100 PN 16 (DIN flange)
VMDE-0402 tangential outlet 4 2 705 (160) 150 (10) 248 (120) 49 (185) 485 (220) DN 100 PN 16 (DIN flange) 1 Maximum theoretical flow based on water viscosity, filter bag specific. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.
MAXILINE VMDE Multi-Bag Filter Housing
Dimensions - inch (mm)
Models A B C D E F
VMDE-0402 bottom outlet 18.70 (475) 29.13 (740) 9.02 (229) 22.01 (559) 15.75 (400) 79.72 (2,025)
VMDE-0402 tangential outlet 9.84 (250) 20.75 (527) 9.02 (229) 22.01 (559) 15.75 (400) 72.64 (1,845) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.
ApplicationsCoarse filtration > 500 µm ✓
Medium filtration >1 0 µm ✓
Fine filtration < 10 µm ✓
Pre-filtration ✓
Safety filtration ✓
High volume ✓
Batch filtration ✓
Circuit filtration ✓
Continuous filtration
Solvents, paints ✓
Fats and oils ✓
Catalyst, activated carbon Acids, bases ✓
Petrochemicals ✓
Water, waste water ✓
Chemical industry ✓
Pharmaceuticals Metal cleaning ✓
Automotive ✓
Electronics Food and beverage Paint and lacquer ✓
Water treatment ✓
Galvanic Industry
A
DB
C
F
E A
DB
C
F
E
Tangential outlet Bottom outlet
USEF-FBH-07
10-2014
MAXILINE™ MDE Multi-Bag Filter Housing
This multi-bag filter housing is equipped with proven and easy-to-use rugged eye-bolt cover closure. The flat lid construction, combined with Eaton’s SENTINEL® filter bag seal rings, seal perfectly against the lid and minimize the amount of residual product on the inner surface. This reduces product loss, spillage and makes cleaning easier. Units are available in 4 filter bag configuration and come standard with filter bag size 02 stainless steel restrainer baskets.
Eaton’s MAXILINE MDE multi-bag filter housing is user-friendly, seals perfectly and is designed for safe filtration and minimized product loss. Ideal for batch process runs and high dirt load applications.
Designed for easy, safe filter bag change-outs with minimal product loss
Features � A counter-balanced, spring-assisted cover lifting mechanism allows for quick and easy opening of even large covers by one person � Flat lid design improves sealing, reduces product loss and makes filter bag change-outs cleaner � Direct feeding of filter bags via individual inlets generates a laminar flow. This ensures optimal cake formation to further improve filtration performance � Heavy-duty stainless steel mounting legs are included � Designed in accordance with Section VIII, Division 1 of the ASME Code (standard in the US), “AD 2000-Merkblätter”, EN 13445 and PED (standard in EMEA)
Options � Available in 304 or 316 stainless steel for high corrosion resistance � Buna-N® O-rings for the cover are standard. EPDM, Viton®, PTFE encapsulated Viton or silicone rubber seals and gaskets are available �Multiple I/O connections to suit application � Low profile design with side inlet and tangential outlet provides easy and full drainage and reduces housing height to make filter bag change-outs easier. No need for ladders, stools or catwalks
Available in EMEA only. Viton® is a registered trademark of E. I. du Pont de Nemours and company.
SENTINEL filter bags utilize a pressure acti-vated sealing lip, which responds to increases in differential pressure
For more information, please email us at [email protected] or visit www.eaton.com/filtration
© 2014 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.
North America 44 Apple Street Tinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700
Europe/Africa/Middle East Auf der Heide 2 53947 Nettersheim, GermanyTel: +49 2486 809-0
Internormen Product Line Friedensstraße 41 68804 Altlußheim, GermanyTel: +49 6205 2094-0
Begerow Product LineAn den Nahewiesen 24 55450 Langenlonsheim, GermanyTel: +49 6704 204-0
ChinaNo. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. ChinaTel: +86 21 5200-0099
Singapore4 Loyang Lane #04-01/02 Singapore 508914Tel: +65 6825-1668
BrazilAv. Julia Gaioli, 474 – Bonsucesso 07251-500 – Guarulhos, BrazilTel: +55 11 2465-8822
8
Technical data
ModelsNo. of
filter bags SizeFlow rate1
GPM (m³/h)Max. pressure
psi (bar)Max. temp.
°F (°C)Housing volume
gal (l)Housing weight
lb (kg)I/O
connections
MDE-0402 tangential/304 4 2 705 (160) 100 (7) 140 (60) 49 (185) 551 (250) DN 100 PN 10 (DIN flange)
MDE-0402 tangential/316 4 2 705 (160) 100 (7) 140 (60) 49 (185) 551 (250) DN 100 PN 10 (DIN flange)
MDE-0402 bottom outlet/304 4 2 705 (160) 100 (7) 140 (60) 49 (185) 551 (250) DN 100 PN 10 (DIN flange)
MDE-0402 bottom outlet/316 4 2 705 (160) 100 (7) 140 (60) 49 (185) 551 (250) DN 100 PN 10 (DIN flange) 1 Maximum theoretical flow based on water viscosity, filter bag specific. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.
MAXILINE MDE Multi-Bag Filter Housing
Dimensions - inch (mm)
Models A B C D E F
MDE-0402 tangential/304 10.04 (255) 20.75 (527) 9.53 (242) 22.00 (559) 17.72 (450) 72.64 (1,845)
MDE-0402 tangential/316 10.04 (255) 20.75 (527) 9.53 (242) 22.00 (559) 17.72 (450) 72.64 (1,845)
MDE-0402 bottom outlet/304 18.70 (475) 27.13 (689) 9.53 (242) 22.00 (559) 17.72 (450) 87.68 (2,227)
MDE-0402 bottom outlet/316 18.70 (475) 27.13 (689) 9.53 (242) 22.00 (559) 17.72 (450) 87.68 (2,227) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.
ApplicationsCoarse filtration > 500 µm ✓
Medium filtration > 10 µm ✓
Fine filtration < 10 µm ✓
Pre-filtration ✓
Safety filtration ✓
High volume ✓
Batch filtration ✓
Circuit filtration ✓
Continuous filtration
Solvents, ppaints ✓
Fats and oils ✓
Catalyst, activated carbon Acids, bases ✓
Petrochemicals ✓
Water, waste water ✓
Chemical industry ✓
Pharmaceuticals Metal cleaning ✓
Automotive ✓
Electronics Food and beverage Paint and lacquer ✓
Water treatment ✓
Galvanic industry
A
D
B
C
F
E
USEF-FBH-08
10-2014
MAXILINE™ MBF Multi-Bag Filter Housing
This multi-bag filter housing is equipped with a robust hand wheel operated davit assembly cover. Simply loosen the swing bolts, turn the davit hand wheel and swing the cover aside to open. Units are available in 3, 4, 6, 8, 10, 12, 14, 16, 18, 20, 22 and 24 filter bag configurations and come standard with filter bag size 02 stainless steel restrainer baskets.
Eaton’s MAXILINE MBF
multi-bag filter housing
features a cost effective,
hand wheel operated
davit assembly cover and
offers up to 24 filter bags
in one multi-bag filter
housing for very high
flow rates and high dirt
load applications.
Holds up to 24 filter bags in a reliable, cost-effective design
Features � A robust, easy to use hand wheel operates the davit assembly cover making it perfect for cost-sensitive applications � Positive O-ring sealing provides bypass-free, safe filtration while the unique 3-point hold down ensures a high-quality seal between each filter bag and the housing body � Heavy-duty stainless steel mounting legs are included � Designed in accordance with Section VIII, Division 1 of the ASME Code (standard in the US), “AD 2000-Merkblätter”, EN 13445 and PED (standard in EMEA)
Options � Available in 304 or 316 stainless steel for high corrosion resistance � Buna-N® O-rings for the cover are standard. EPDM, Viton®, PTFE encapsulated Viton or silicone rubber seals and gaskets are available �Multiple I/O connections to suit application � Available with hydraulic-assist davit assembly cover � Custom fittings, surface finishes, coatings and design code ratings to meet specified applications
Viton® is a registered trademark of E. I. du Pont de Nemours and company.
Unique 3-point hold down ensures a high-quality seal between each filter bag and housing body
For more information, please email us at [email protected] or visit www.eaton.com/filtration
© 2014 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.
North America 44 Apple Street Tinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700
Europe/Africa/Middle East Auf der Heide 2 53947 Nettersheim, GermanyTel: +49 2486 809-0
Internormen Product Line Friedensstraße 41 68804 Altlußheim, GermanyTel: +49 6205 2094-0
Begerow Product LineAn den Nahewiesen 24 55450 Langenlonsheim, GermanyTel: +49 6704 204-0
ChinaNo. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. ChinaTel: +86 21 5200-0099
Singapore4 Loyang Lane #04-01/02 Singapore 508914Tel: +65 6825-1668
BrazilAv. Julia Gaioli, 474 – Bonsucesso 07251-500 – Guarulhos, BrazilTel: +55 11 2465-8822
8
Technical data
ModelsNo. of
filter bags SizeFlow rate1
GPM (m³/h)Max. pressure
psi (bar)Max. temp.
°F (°C)Housing volume
gal (l)Housing weight
lb (kg)I/O
connections
MBF-0302* 3 2 528 (120) 150 (10) 250 (121) 40 (151) 460 (208) 3”
MBF-0402 4 2 705 (160) 150 (10) 250 (121) 54 (204) 615 (279) 4”
MBF-0602* 6 2 1,057 (240) 150 (10) 250 (121) 95 (360) 810 (367) 6”
MBF-0802 8 2 1,409 (320) 150 (10) 250 (121) 140 (530) 970 (440) 8”
MBF-1002* 10 2 1,761 (400) 150 (10) 250 (121) 215 (814) 1,400 (635) 10”
MBF-1202 12 2 2,114 (480) 150 (10) 250 (121) 245 (927) 1,500 (680) 10”
MBF-1402* 14 2 2,466 (560) 150 (10) 250 (121) 311 (1,177) 1,800 (816) 10”
MBF-1602* 16 2 2,818 (640) 150 (10) 250 (121) 317 (1,200) 1,875 (850) 12”
MBF-1802* 18 2 3,170 (720) 150 (10) 250 (121) 446 (1,688) 2,405 (1,090) 12”
MBF-2002* 20 2 3,523 (800) 150 (10) 250 (121) 454 (1,718) 2,445 (1,109) 14”
MBF-2202* 22 2 3,875 (880) 150 (10) 250 (121) 570 (2,158) 2,730 (1,238) 14”
MBF-2402* 24 2 4,227 (960) 150 (10) 250 (121) 570 (2,158) 2,730 (1,238) 14” 1 Maximum theoretical flow based on water viscosity, filter bag specific. Metric measures represent comparable products produced for EMEA and may not be an exact conversions. * Available in the US only.
MAXILINE MBF Multi-Bag Filter Housing
Dimensions - inch (mm)
Models A B C D E F
MBF-0302* 6.00 (152) 22.50 (572) 6.43 (163) 18.00 (457) 12.75 (324) 57.00 (1,448)
MBF-0402 6.00 (152) 22.19 (564) 7.93 (201) 24.00 (610) 16.00 (406) 61.00 (1,550)
MBF-0602* 7.00 (178) 20.00 (508) 9.81 (249) 26.00 (660) 18.50 (470) 62.00 (1,575)
MBF-0802 8.25 (210) 19.00 (483) 10.81 (275) 30.00 (762) 20.50 (521) 64.00 (1,625)
MBF-1002* 10.00 (254) 17.00 (432) 13.31 (338) 36.00 (914) 24.50 (622) 70.00 (1,778)
MBF-1202 10.00 (254) 17.00 (432) 13.83 (352) 38.00 (965) 24.50 (622) 72.00 (1,829)
MBF-1402* 11.50 (292) 20.00 (508) 11.81 (300) 42.00 (1,067) 28.00 (711) 74.00 (1,880)
MBF-1602* 11.50 (292) 20.00 (508) 11.81 (300) 42.00 (1,067) 28.00 (711) 75.00 (1,905)
MBF-1802* 11.50 (292) 20.00 (508) 11.81 (300) 42.00 (1,067) 28.00 (711) 75.00 (1,905)
MBF-2002* 12.50 (318) 22.00 (559) 11.38 (289) 48.00 (1,219) 31.00 (787) 82.00 (2,083)
MBF-2202* 12.50 (318) 22.00 (559) 13.44 (341) 52.00 (1,321) 33.00 (838) 84.00 (2,134)
MBF-2402* 12.50 (318) 22.00 (559) 13.44 (341) 52.00 (1,321) 33.00 (838) 84.00 (2,134) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversion from inches.
ApplicationsCoarse filtration > 500 µm ✓
Medium filtration > 10 µm ✓
Fine filtration < 10 µm ✓
Pre-filtration ✓
Safety filtration ✓
High volume ✓
Batch filtration Circuit filtration ✓
Continuous filtration Solvents, paints ✓
Fats and oils ✓
Catalyst, activated carbon Acids, bases ✓
Petrochemicals ✓
Water, waste water ✓
Chemical industry ✓
Pharmaceuticals Metal cleaning ✓
Automotive ✓
Electronics Food and beverage Paint and lacquer ✓
Water treatment ✓
Galvanic industry
A
D
E E
B
C
Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request.
Epoxy coating is only one of various surface coating and finish options (available in EMEA only)
USEF-FBH-09
10-2014
Eaton’s PROLINE 100 Series SE multi-bag filter housing is user-friendly, cost-effective and designed for high volume applications and processes demanding frequent filter bag change-outs. Ideal for batch process runs and high dirt load applications.
PROLINE 100TM Series SE Multi-Bag Filter Housing
PROLINE 100 Series SE multi-bag filter housing with 8 filter bag capacity
This multi-bag filter housing with the QIC-LOCK opening mechanism is the most competitively priced multi-bag filter housing Eaton has to offer. Units are available in 4, 6 and 8 filter bag configurations and come standard with filter bag size 02 stainless steel restrainer baskets.
Features � 100 psi (6.9 bar), non-code bag filter housing, for a wide variety of filtration applications � Low profile design with side inlet and tangential outlet provides easy and full drainage and reduces housing height to make filter bag change-outs easier. No need for ladders, stools or catwalks
High-volume multi-bag filter housing with QIC-LOCK™ opening mechanism
� Positive O-ring sealing provides bypass-free, safe filtration while the unique 3-point hold down ensures a high-quality seal between each filter bag and the housing body � QIC-LOCK opening mechanism allows for safe, easy and fast filter bag change-outs for higher productivity and lower operating costs. Ideal for processes requiring frequent filter bag changes such as batch applications � Automatic safety interlock for venting housing (cover cannot be opened if housing is under pressure) � A counter-balanced, spring-assisted cover lifting mechanism allows for quick and easy opening of even large covers by one person
� 304 stainless steel construction with bead-blast, external finish � 150# RF flanged inlet and outlet ports for side inlet and tangential outlet configuration � Heavy-duty stainless steel mounting legs are included
Options � Available as in-line or loop piping configuration (shown) � Buna-N® O-rings for the cover are standard. Viton® or EPDM are available
Available in the US only. Viton® is a registered trademark of E. I. du Pont de Nemours and company.
Opening the housing for change-out is simple and quick. Disengaging the safety interlock releases system pressure.
A few turns of the hand wheel opens the V-clamp collar so the cover can be lifted.
The counter-balanced hinge allows the cover to be lifted with ease and stay in any position for filter bag change-out.
For more information, please email us at [email protected] or visit www.eaton.com/filtration
© 2014 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.
North America 44 Apple Street Tinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700
Europe/Africa/Middle East Auf der Heide 2 53947 Nettersheim, GermanyTel: +49 2486 809-0
Internormen Product Line Friedensstraße 41 68804 Altlußheim, GermanyTel: +49 6205 2094-0
Begerow Product LineAn den Nahewiesen 24 55450 Langenlonsheim, GermanyTel: +49 6704 204-0
ChinaNo. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. ChinaTel: +86 21 5200-0099
Singapore4 Loyang Lane #04-01/02 Singapore 508914Tel: +65 6825-1668
BrazilAv. Julia Gaioli, 474 – Bonsucesso 07251-500 – Guarulhos, BrazilTel: +55 11 2465-8822
8
PROLINE 100 Series SE Multi-Bag Filter Housing
Dimensions - inch (mm)
Models A B C D E F G
VPMBF-0402-BB07-040A-NT-11SE 10.06 (256) 20.75 (527) 55.63 (1,413) 22.00 (559) 36.00 (914) 71.13 (1,807) 17.75 (451)
VPMBF-0402-BB07-040A-NT-11SE-L 10.06 (256) 20.75 (527) 55.63 (1,413) 22.00 (559) 36.00 (914) 71.13 (1,807) 17.75 (451)
VPMBF-0602-BB07-060A-NT-11SE 7.88 (200) 20.81 (529) 55.44 (1,408) 31.50 (800) 47.00 (1,194) 78.88 (2,003) 23.50 (597)
VPMBF-0602-BB07-060A-NT-11SE-L 7.88 (200) 20.81 (529) 55.44 (1,408) 31.50 (800) 46.13 (1,172) 78.88 (2,003) 23.50 (597)
VPMBF-0802-BB07-060A-NT-11SE 7.88 (200) 20.81 (529) 55.44 (1,408) 31.50 (800) 47.00 (1,194) 78.88 (2,003) 23.50 (597)
VPMBF-0802-BB07-060A-NT-11SE-L 7.88 (200) 20.81 (529) 55.44 (1,408) 31.50 (800) 46.13 (1,172) 78.88 (2,003) 23.50 (597) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.
ApplicationsCoarse filtration > 500 µm ✓
Medium filtration > 10 µm ✓
Fine filtration < 10 µm ✓
Pre-filtration ✓
Safety filtration ✓
High volume ✓
Batch filtration ✓
Circuit filtration ✓
Continuous filtration
Solvents, paints ✓
Fats and oils ✓
Catalyst, activated carbon Acids, bases ✓
Petrochemicals ✓
Water, waste water ✓
Chemical industry ✓
Pharmaceuticals Metal cleaning ✓
Automotive ✓
Electronics Food and beverage Paint and lacquer ✓
Water treatment ✓
Galvanic industry
A
D
BCF
E
E
G
G
Loop configuration
In-line configuration
USEF-FBH-03
10-2014
Technical data
ModelsNo. of
filter bags SizeFlow rate1
GPM (m³/h)Max. pressure
psi (bar)Max. temp.
°F (°C)
Housing volume gal (l)
Housing weight lb (kg)
I/O connections
VPMBF-0402-BB07-040A-NT-11SE 4 2 400 (91) 100 (6.9) 176 (80) 56 (212) 432 (196) 4” in-line
VPMBF-0402-BB07-040A-NT-11SE-L 4 2 400 (91) 100 (6.9) 176 (80) 56 (212) 432 (196) 4” loop
VPMBF-0602-BB07-060A-NT-11SE 6 2 900 (204) 100 (6.9) 176 (80) 120 (454) 712 (323) 6” in-line
VPMBF-0602-BB07-060A-NT-11SE-L 6 2 900 (204) 100 (6.9) 176 (80) 120 (454) 712 (323) 6” loop
VPMBF-0802-BB07-060A-NT-11SE 8 2 900 (204) 100 (6.9) 176 (80) 120 (454) 736 (338) 6” in-line
VPMBF-0802-BB07-060A-NT-11SE-L 8 2 900 (204) 100 (6.9) 176 (80) 120 (454) 736 (338) 6” loop 1 Maximum theoretical flow based on water viscosity, filter bag specific. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.
PROLINE 100™ Series HE Multi-Bag Filter Housing
PROLINE 100 Series HE multi-bag filter housing with 8 filter bag capacity
PROLINE 100 Series HE multi-bag filter housing with 4 bag capacity
This multi-bag filter housing is equipped with a proven and easy-to-use rugged eye-bolt cover closure. Units are available in 4, 6 and 8 filter bag configurations and come standard with filter bag size 02 stainless steel restrainer baskets.
Features � 100 psi (6.9 bar), non-code bag filter housing, for a wide variety of filtration applications � Low profile design with side inlet and tangential outlet provides easy and full drainage and reduces housing height to make filter bag change-outs easier. No need for ladders, stools or catwalks
Eaton’s PROLINE 100 Series HE multi-bag filter housing offers the most cost-effective solution to multi-bag units requirements’ for a wide variety of filtration applications where a code stamp is not needed.
The most competitively priced multi-bag filter housing Eaton has to offer
� Positive O-ring sealing provides bypass-free, safe filtration while the unique 3-point hold down ensures a high-quality seal between each filter bag and the housing body � A counter-balanced, spring-assisted cover lifting mechanism allows for quick and easy opening of even large covers by one person � 304 stainless steel construction with bead-blast, external finish � 150# RF flanged inlet and outlet ports for side inlet and tangential outlet configuration � Heavy-duty stainless steel mounting legs are included
Options � Available as in-line or loop piping configuration (shown) � Buna-N® O-rings for the cover are standard. EPDM, Viton®, PTFE encapsulated Viton or silicone rubber seals and gaskets are available
Available in the US only. Viton® is a registered trademark of E. I. du Pont de Nemours and company
For more information, please email us at [email protected] or visit www.eaton.com/filtration
© 2014 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.
North America 44 Apple Street Tinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700
Europe/Africa/Middle East Auf der Heide 2 53947 Nettersheim, GermanyTel: +49 2486 809-0
Internormen Product Line Friedensstraße 41 68804 Altlußheim, GermanyTel: +49 6205 2094-0
Begerow Product LineAn den Nahewiesen 24 55450 Langenlonsheim, GermanyTel: +49 6704 204-0
ChinaNo. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. ChinaTel: +86 21 5200-0099
Singapore4 Loyang Lane #04-01/02 Singapore 508914Tel: +65 6825-1668
BrazilAv. Julia Gaioli, 474 – Bonsucesso 07251-500 – Guarulhos, BrazilTel: +55 11 2465-8822
8
Technical data
ModelsNo. of
filter bags SizeFlow rate1
GPM (m³/h)Max. pressure
psi (bar)Max. temp.
°F (°C)
Housing volume gal (l)
Housing weight lb (kg)
I/O connections
PMBF-0402-BB07-040A-NT-11HE 4 2 400 (91) 100 (6) 176 (80) 56 (212) 397 (180) 4” in-line
PMBF-0402-BB07-040A-NT-11HE-L 4 2 400 (91) 100 (6) 176 (80) 56 (212) 397 (180) 4” loop
PMBF-0602-BB07-060A-NT-11HE 6 2 900 (204) 100 (6) 176 (80) 120 (454) 632 (286) 6” in-line
PMBF-0602-BB07-060A-NT-11HE-L 6 2 900 (204) 100 (6) 176 (80) 120 (454) 632 (286) 6” loop
PMBF-0802-BB07-060A-NT-11HE 8 2 900 (204) 100 (6) 176 (80) 120 (454) 652 (296) 6” in-line
PMBF-0802-BB07-060A-NT-11HE-L 8 2 900 (204) 100 (6) 176 (80) 120 (454) 652 (296) 6” loop
1 Maximum theoretical flow based on water viscosity, filter bag specific. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.
PROLINE 100 Series HE Multi-Bag Filter Housing
Dimensions - inch (mm)
Model A B C D E F G
PMBF-0402-BB07-040A-NT-11HE 10.00 (254) 20.75 (527) 46.44 (1,180) 22.00 (559) 35.50 (901) 71.19 (1,808) 17.75 (451)
PMBF-0402-BB07-040A-NT-11HE-L 10.00 (254) 20.75 (527) 46.44 (1,180) 22.00 (559) 30.88 (784) 71.19 (1,808) 17.75 (451)
PMBF-0602-BB07-060A-NT-11HE 7.88 (200) 20.81 (529) 48.00 (1,219) 31.50 (800) 47.00 (1,194) 79.00 (2,007) 23.50 (597)
PMBF-0602-BB07-060A-NT-11HE-L 7.88 (200) 20.81 (529) 48.00 (1,219) 31.50 (800) 42.75 (1,085) 79.00 (2,007) 23.50 (597)
PMBF-0802-BB07-060A-NT-11HE 7.88 (200) 20.81 (529) 48.00 (1,219) 31.50 (800) 47.00 (1,194) 79.00 (2,007) 23.50 (597)
PMBF-0802-BB07-060A-NT-11HE-L 7.88 (200) 20.81 (529) 48.00 (1,219) 31.50 (800) 42.75 (1,085) 79.00 (2,007) 23.50 (597) Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.
ApplicationsCoarse filtration > 500 µm ✓
Medium filtration > 10 µm ✓
Fine filtration < 10 µm ✓
Pre-filtration ✓
Safety filtration ✓
High volume ✓
Batch filtration ✓
Circuit filtration ✓
Continuous filtration
Solvents, paints ✓
Fats and oils ✓
Catalyst, activated carbon Acids, bases ✓
Petrochemicals ✓
Water, waste water ✓
Chemical industry ✓
Pharmaceuticals Metal cleaning ✓
Automotive ✓
Electronics Food and beverage Paint and lacquer ✓
Water treatment ✓
Galvanic industry
A
D
BCF
E
E
G
G
Loop configuration
In-line configuration
USEF-FBH-04
10-2014
DUOLINE™ Multi-Bag Filter Housing System
DUOLINE units with SIDELINE housings
This multi-bag filter housing system consists of two single bag filter housings fitted together at the inlet and outlet by a butterfly valve or ball valve assembly. The dual housing system allows the filtration process to run continuously even during filter bag change-outs. Units come standard with filter bag size 02 stainless steel restrainer baskets.
Features � Can be equipped with the most advanced TOPLINE™ single bag filter housing, the SIDELINE™ single bag filter housing for a greater range of applications or the economical FLOWLINE™ single bag filter housing for coarse particle filtration � System arrangement assures continuous flow rates. One unit can be taken off-line in sequence for filter bag change-outs without having to take the other filter unit off-line
Eaton’s DUOLINE
multi-bag filter housing
systems are duplex units
for continuous filtration
processes where the
system flow cannot be
shut down for filter bag
change-outs.
Duplex units for continuous filtration processes
� Swing bolt cover for quick, easy filter bag change-outs. The TOPLINE single bag filter housing features a domed cover. FLOWLINE and SIDELINE single bag filter housings covers’ feature an integrated ergonomic handle � TOPLINE and SIDELINE models feature extended five year warranties and are designed in accordance with Section VIII, Division 1 of the ASME Code (standard in the US), “AD 2000-Merkblätter”, EN 13445 and PED (standard in EMEA) � Smooth, bead-blasted finish makes it easy to completely clean the interior
Options � Housings and fittings available in stainless steel for high corrosion resistance. Carbon steel versions available in the US � Available without valves, with butterfly valves or with ball valve assemblies � Buna-N® O-rings for the cover are standard. EPDM, Viton®, PTFE encapsulated Viton or silicone rubber seals and gaskets are available � Linkage assembly available. A quick turn of the linkage handle diverts the flow from one single bag filter housing to the other, guaranteeing a synchronized changeover
Viton® is a registered trademark of E. I. du Pont de Nemours and company.
For more information, please email us at [email protected] or visit www.eaton.com/filtration
© 2014 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.
North America 44 Apple Street Tinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700
Europe/Africa/Middle East Auf der Heide 2 53947 Nettersheim, GermanyTel: +49 2486 809-0
Internormen Product Line Friedensstraße 41 68804 Altlußheim, GermanyTel: +49 6205 2094-0
Begerow Product LineAn den Nahewiesen 24 55450 Langenlonsheim, GermanyTel: +49 6704 204-0
ChinaNo. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. ChinaTel: +86 21 5200-0099
Singapore4 Loyang Lane #04-01/02 Singapore 508914Tel: +65 6825-1668
BrazilAv. Julia Gaioli, 474 – Bonsucesso 07251-500 – Guarulhos, BrazilTel: +55 11 2465-8822
8
DUOLINE Multi-Bag Filter Housing System
ApplicationsCoarse filtration > 500 µm ✓
Medium filtration > 10 µm Fine filtration < 10 µm
Pre-filtration ✓
Safety filtration ✓
High volume Batch filtration Circuit filtration ✓
Continuous filtration ✓
Solvents, paints Fats and oils ✓
Catalyst, activated carbon Acids, bases ✓
Petrochemicals ✓
Water, waste water ✓
Chemical industry ✓
Pharmaceuticals Metal cleaning Automotive Electronics Food and beverage Paint and lacquer ✓
Water treatment ✓
Galvanic industry
D
F
E
B
A
C
DUOLINE multi-bag filter housing with
SIDELINE single bag filter housings
Technical data
ModelsNo. of
filter bags SizeFlow rate1
GPM (m³/h)Max. pressure
psi (bar)Max. temp.
°F (°C)Housing volume
gal (l)Housing weight
lb (kg)I/O
connections
F3AVTB0222 (TOPLINE) 2 2 176 (40) 150 (10) 250 (160) 16 (60.5) 240 (109) 2”
F3AVTB0322 (TOPLINE) 2 2 176 (40) 150 (10) 250 (160) 16 (60.5) 240 (109) 2”
F3AVSB00222 (SIDELINE) 2 2 176 (40) 150 (10) 250 (160) 16 (60.5) 300 (134) 2”
F3AVSB00322 (SIDELINE) 2 2 176 (40) 150 (10) 250 (160) 17 (64.35) 330 (149.7) 3”
F3AVFB00422 (FLOWLINE) 2 2 176 (40) 150 (10) 250 (160) 15 (56.78) 200 (90.7) 2”
F3AVFB00442 (FLOWLINE) 2 2 176 (40) 150 (10) 250 (160) 15 (56.78) 200 (90.7) 2”
F3AVFB00443 (FLOWLINE) 2 2 176 (40) 150 (10) 250 (160) 15 (56.78) 200 (90.7) 3”
F3AVFB011073 (FLOWLINE) 2 2 176 (40) 150 (10) 250 (160) 15 (56.78) 200 (90.7) 3” 1 Maximum theoretical flow based on water viscosity, filter bag specific. 2 Depending on seal material. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.
Dimensions - inch (mm)
Models A B C D E F
F3AVTB0222 (TOPLINE) 19.25 (489) 24.50 (622) 1.93 (49) 8.62 (219) 37.50 (952) 64.00 (1,625)
F3AVTB0322 (TOPLINE) 19.25 (489) 24.50 (622) 1.93 (49) 8.62 (219) 37.50 (952) 64.00 (1,625)
F3AVSB00222 (SIDELINE) 19.25 (489) 27.50 (698) 3.15 (80) 8.62 (219) 30.62 (777) 70.00 (1,778)
F3AVSB00322 (SIDELINE) 19.25 (489) 27.50 (698) 3.15 (80) 8.62 (219) 33.12 (841) 70.00 (1,778)
F3AVFB00422 (FLOWLINE) 19.25 (489) 28.44 (722) 3.34 (85) 7.68 (195) 26.75 (679) 69.00 (1,752)
F3AVFB00442 (FLOWLINE) 19.25 (489) 28.44 (722) 3.34 (85) 7.68 (195) 26.75 (679) 69.00 (1,752)
F3AVFB00443 (FLOWLINE) 19.25 (489) 28.44 (722) 3.44 (87) 7.68 (195) 31.75 (806) 69.00 (1,752)
F3AVFB01073 (FLOWLINE) 19.25 (489) 28.44 (722) 3.44 (87) 7.68 (195) 31.75 (806) 69.00 (1,752)
Dimensions for reference only and approximate. Exact dimensions for installation purposes available on request. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.
USEF-FBH-17
10-2014
MODULINE™ Multi-Bag Filter Housing System
This multi-bag filter housing system provides a compact and efficient assembly of two up to eight single bag filter housings. Its space-saving design can be readily expanded with additional housing units and extra banks to provide the highest level of flexibility for process requirements. The footprint is smaller than duplexed multi-bag filter housings. Units come standard with filter bag size 02 stainless steel restrainer baskets.
Features � Can be equipped with the economical FLOWLINE™ or FLOWLINE II™* single bag filter housing for coarse particle filtration, the SIDELINE™ single bag filter housing for a greater range of applications or the most advanced TOPLINE™ single bag filter housing
Eaton’s MODULINE
multi-bag filter housing
systems are double or
modular multi-bag units
designed for applications
where the flow rate is
too high for a single bag
filter housing.
Modular system for continuous flow capability, higher efficiency and lower costs
� System arrangement assures continuous flow rates. Each unit is individually valved and can be taken off-line in sequence for filter bag change-outs without having to take the complete bank of filters off-line � Swing bolt cover for quick, easy filter bag change-outs. The TOPLINE single bag filter housing features a domed cover. FLOWLINE and SIDELINE single bag filter housings covers’ feature an integrated ergonomic handle � TOPLINE and SIDELINE models are designed in accordance with Section VIII, Division 1 of the ASME Code (standard in the US), “AD 2000-Merkblätter”, EN 13445 and PED (standard in EMEA)
� Easy-action, 1/4-turn ball valves provide precision flow control � Smooth, bead-blasted finish makes it easy to completely clean the interior
Options � Available in stainless steel for high corrosion resistance. Carbon steel version available in the US � Buna-N® O-rings for the cover are standard. EPDM, Viton®, PTFE encapsulated Viton or silicone rubber seals and gaskets are available � Optional gauges, vents and pressurize air port with 1/4” threaded cover taps
* Available in the US only.Viton® is a registered trademark of E. I. du Pont de Nemours and company.
For more information, please email us at [email protected] or visit www.eaton.com/filtration
© 2014 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.
North America 44 Apple Street Tinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700
Europe/Africa/Middle East Auf der Heide 2 53947 Nettersheim, GermanyTel: +49 2486 809-0
Internormen Product Line Friedensstraße 41 68804 Altlußheim, GermanyTel: +49 6205 2094-0
Begerow Product LineAn den Nahewiesen 24 55450 Langenlonsheim, GermanyTel: +49 6704 204-0
ChinaNo. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. ChinaTel: +86 21 5200-0099
Singapore4 Loyang Lane #04-01/02 Singapore 508914Tel: +65 6825-1668
BrazilAv. Julia Gaioli, 474 – Bonsucesso 07251-500 – Guarulhos, BrazilTel: +55 11 2465-8822
8
MODULINE Multi-Bag Filter Housing System
ApplicationsCoarse filtration > 500 µm ✓
Medium filtration > 10 µm Fine filtration < 10 µm
Pre-filtration ✓
Safety filtration ✓
High volume ✓
Batch filtration Circuit filtration Continuous filtration ✓
Solvents, paints Fats and oils ✓
Catalyst, activated carbon Acids, bases Petrochemicals ✓
Water, waste water ✓
Chemical industry ✓
Pharmaceuticals Metal cleaning ✓
Automotive ✓
Electronics Food and beverage Paint and lacquer Water treatment ✓
Galvanic industry
12 [305] TYPA
6 [152]
LID SWING
1/4" NPT GAUGEPORT, HIGH
1/4" NPTVENT PORT
PRESSURE
C
34 [864]
B18 [458]D
INLET
1/4" NPT GAUGEPORT, LOWPRESSSURE
2-WAY BALL VALVEFOR ISOLATION
LIDHANDLE
INLET
OUTLET
1/2" NPTDRAIN PORT
E
OUTLET
3 [76]
858 [219]
14 [355] TYP
Models
No. of
filter bags Size
Flow rates1
GPM (m³/h)
Housing volume gal (l)
Housing weight lb (kg)
Max. pressure psi (bar)
Max. temp.2 °F (°C)
I/O connections
Dimensions - in (mm)
A B C D E
M-TBF-0202 2 2 353 (80) 16.5 (62.5) 320 (145.1) 150 (10) 400 (160) 3” flange 24 (610) 23 (584) 7-3/4 (197) 24-3/16 (614) 47-1/2 (1,207)
M-TBF-0302 3 2 528 (120) 25.7 (104.9) 490 (222.3) 150 (10) 400 (160) 4” flange 36 (914) 35 (889) 8-1/4 (210) 24-11/16 (627) 48 (1,219)
M-TBF-0402 4 2 705 (160) 35 (132.5) 630 (285.8) 150 (10) 400 (160) 4” flange 48 (1,219) 47 (1,194) 8-1/4 (210) 24-11/16 (627) 48 (1,219)
M-TBF-0502 5 2 881 (200) 54.2 (205.2) 800 (362.9) 150 (10) 400 (160) 6” flange 60 (1,524) 59 (1,499) 9-5/16 (236) 25-3/4 (654) 49-1/16 (1,246)
M-TBF-0602 6 2 1,057 (240) 65.5 (248) 950 (430.9) 150 (10) 400 (160) 6” flange 72 (1,829) 71 (1,803) 9-5/16 (236) 25-3/4 (654) 49-1/16 (1,246)
M-TBF-0702 7 2 1,233 (280) 76.7 (290.3) 1,100 (499) 150 (10) 400 (160) 6” flange 84 (2,134) 83 (2,108) 9-5/16 (236) 25-3/4 (654) 49-1/16 (1,246)
M-TBF-0802 8 2 1,409 (320) 86 (325.6) 1,250 (567) 150 (10) 400 (160) 6” flange 96 (2,438) 95 (2,413) 9-5/16 (236) 25-3/4 (654) 49-1/16 (1,246) 1 Maximum theoretical flow based on water viscosity, filter bag specific. 2 Depending on seal material. Metric measures represent comparable products produced for EMEA and may not be an exact conversions.
Dimensions for MODULINE multi-bag filter housing using TOPLINE single bag filter housingsDetails on MODULINE multi-bag filter housing assemblies using SIDELINE and FLOWLINE single bag filter housings available on request.
Technical data MODULINE systems with TOPLINE housings
Dimensions in inches
0.1
.03
.04
.07
.11
.14
.19
.25
.30
.37
.45
pre
ssu
re d
rop
, b
ar
0.1
0.2
0.4
0.6
1.0
1.6
2.1
2.8
3.6
4.4
5.3
6.5
pre
ssu
re d
rop
, p
si
flow rate gpm, per housing0 6020 40
75 150 225 300 375 450
80 100 120
Flow vs. Pressure DropFor single housing,without media
flow rate L/min, per housing
USEF-FBH-16
10-2014
Mechanically Cleaned Filters & Strainer///////////////////////TECHNICAL INFORMATION Bag Filter Housings
Bag filter housing specification codes
V MBF 04 02 AS 10 040 A U T S E N M11
RangesEBF: ECOLINE™ FBF: FLOWLINE™SBL: FLOWLINE II™*PBF: POLYLINE™SBF: SIDELINE™TBF: TOPLINE™MBF: MAXILINE™ DomeMDE: MAXILINE™ FlatPMBF: PROLINE™*
OptionsD: DUOLINE™M: MODULINE™
Number of filter bags 1, 2, 4, 8, 12, 16, 20, 24
Pressure ratings06: 90 psi
(6 bar)07: 100 psi
(7 bar)09: 135 psi
(9 bar)10: 150 psi
(10 bar)16: 225 psi
(16 bar)21: 300 psi
(21 bar)
Filter bag sizes01: Ø 7 x 17” L
(180 x 430 mm)02: Ø 7 x 32” L
(180 x 810 mm)03: Ø 4 x 9” L
(100 x 230 mm)04: Ø 4 x 15” L
(100 x 380 mm)
Connection typesA: ANSI flangeN: NPT female threadR: Tri-clampB: BSP femaleC: BSP maleD: DIN flangeT: Tri-clamp (DN)I: Milk pipe threadW: Butt-weldJ: JIS flangeS: SMSU: MaconL: RJTM: Other
Special outletT: Tangental
Special M: Special
MaterialsAB: SS 316 (1.4401)AC: SS 316 Ti (1.4571)AD: 1.4408 + 1.4571AE: 1.4408 + 316 LAF: 1.4408AS: SS 316L (1.4404) BB: SS 304 (1.4301)BS: SS 304L (1.4306)CS: Carbon steelHB: HASTELLOY® C276HC: HASTELLOY C22HD: HASTELLOY C4PF: PVDFPO: PolypropylenePV: PVCUR: UranusTI: Titanium
Inside finishes (1st number) : Stainless steel0: Pickled1: Glass bead-blasted2: Electro-polish standard3: Food grade polished4: Pharma grade polish5: Halar® coated6: End user spec7: Anti-stick code
Outside finishes (2nd number) : Carbon steel0: Brushed/oiled1: Glass bead-/sand-blasted2: Primed3: Paint ES-3014: Epoxy coated5: Halar coated6: End user spec7: Anti-stick code
Connection sizesFor A, N, R: 005: 1/2”010: 1”012: 11/4”015: 11/2”020: 2”up to 140: 14”
For B, D, T, I, W, J, S:025: DN 25050: DN 50080: DN 80100: DN 100125: DN 125150: DN 150200: DN 200250: DN 250350: DN 350
CodestampsM: UM StampU: U StampX: CE Stamp
Closure stylesB: Eye-bolts/ringnutsC: Stut-bolts/ringnutsD: Stut-bolts/hexnutsE: Speed bar knobsG: Segment clampH: Swingbolts/hexnutsR: Ratchet closureS: QIC-LOCKV: V-clamp
Lid lift styleA: Davit hydraulicC: Counter balanceD: Davit manualE: Spring assistH: HydraulicO: ManualP: Gas springS: David spring assist
SpecialsF: Full heating jacketH: Heating jacketN: Without jacketT: Total heating jacket
– – – – – – –
All the information necessary to understand a Eaton bag filter housing description code is listed above. The example description listed, a D-VMBF-0402-AS10-040A-UT-11SEN-M is for a duplex MAXILINE 4 filter bag housing for 7 x 32” L (180 x 810 mm) filter bags, constructed of 316L (1.4404) stainless steel, rated at 150 psi (10 bar), with 4” ANSI flange inlet/outlets. It carries an ASME “U” code stamp and has a tangential outlet. The housing has a glass bead-blasted finish both inside and outside, has a QIC-LOCK opening mechanism, a spring-assisted cover lifter, does not have a heating jacket and is a “special” design.
* Available in the US only. HASTELLOY® is a registered trademark of Haynes International Inc. Halar® is a registered trademark of Solvay Group.
D –
OptionsT: T-boltV: QIC-LOCK™
For more information, please email us at [email protected] or visit www.eaton.com/filtration
© 2014 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.
North America 44 Apple Street Tinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700
Europe/Africa/Middle East Auf der Heide 2 53947 Nettersheim, GermanyTel: +49 2486 809-0
Internormen Product Line Friedensstraße 41 68804 Altlußheim, GermanyTel: +49 6205 2094-0
Begerow Product LineAn den Nahewiesen 24 55450 Langenlonsheim, GermanyTel: +49 6704 204-0
ChinaNo. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. ChinaTel: +86 21 5200-0099
Singapore4 Loyang Lane #04-01/02 Singapore 508914Tel: +65 6825-1668
BrazilAv. Julia Gaioli, 474 – Bonsucesso 07251-500 – Guarulhos, BrazilTel: +55 11 2465-8822
8
Mechanically Cleaned Filters & Strainer////////////////////////TECHNICAL INFORMATION Bag Filter Housings
Applications
Special applicationsThe engineers at Eaton can adapt any of our filtration products for special applications. Custom fabricated skid systems can be engineered to your exact specifications.
Contact Eaton and let us know about your special needs. E-mail us at [email protected]
MBF/MDE VMBF/VMDE
Coarse filtration > 500 µm � � � � � � � � � �
Medium filtration > 10 µm � � � � � �
Fine filtration < 10 µm � � � �
Pre-filtration � � � � � � � � � � �
Safety filtration � � � � � �
High volume � � � �
Batch filtration � � � � � � �
Circuit filtration � � � � � �
Continuous filtration �
Solvents, paints � � � � �
Fats and oils � � � � � � �
Catalyst, activated carbon �
Acids, bases � � � � � � �
Petrochemicals � � � � � � �
Water, waste water � � � � � � � � � � �
Chemical industry � � � � � � �
Pharmaceuticals �
Metal cleaning � � � � � � � �
Automotive � � � � �
Electronics � �
Food and beverage � �
Paint and lacquer � � � � � �
Water treatment � � � � � � � � � � �
Galvanic industry � � �
ECOLINE™
FLOWLINE™
FLOWLINE II™*
SIDELINE™
TOPLINE™
MAXILINE™
PROLINE™*
POLYLINE™
DUOLINE™
MODULINE™
The FloWash™ basic filter cart is an easy-to-deploy mobile system that helps keep your shop floor fluids cleaner for improved production efficiency. It can be used on-line or as a stand-alone filter station. Save on replacement fluids and the associated disposal costs.
Eaton custom fabricates filter skids in a variety of metals can be configured with pumps, automated valves, control packages, etc. Fabricated filtration systems are engineered to fit the exact requirements of the application, using single or multi-bag filter housings and automated self-cleaning systems.
* Available in the US only.
USEF-FBH-18
10-2014
11
10
01
09
07
0403
05
02
06
08
The wide range of Eaton filter housing accessories makes it possible to custom design a housing to the exact specifications of your application, no matter how
complex or unique it may be.
Accessories also can be used to improve application processes or requirements. For example, displacement
balloons make filter bag change-outs easier, and LOFNETIC magnetic inserts extend filter bag lifetime in applications where magnetic particles are encountered.
Original Eaton “added value” accessories are guaranteed to work with your Eaton bag filter housings to deliver the highest performance and reliability.
Original Eaton accessories, consumables and spare parts for safety and reliability
///////////////////////TECHNICAL INFORMATION Bag Filter Housing Accessories
For more information, please email us at [email protected] or visit www.eaton.com/filtration
© 2014 Eaton. All rights reserved. All trademarks and registered trademarks are the property of their respective owners. All information and recommenda-tions appearing in this brochure concerning the use of products described herein are based on tests believed to be reliable. However, it is the user’s responsibility to determine the suitability for his own use of such products. Since the actual use by others is beyond our control, no guarantee, expressed or implied, is made by Eaton as to the effects of such use or the results to be obtained. Eaton assumes no liability arising out of the use by others of such products. Nor is the infor-mation herein to be construed as absolutely complete, since additional information may be necessary or desirable when particular or exceptional conditions or circumstances exist or because of applicable laws or government regulations.
North America 44 Apple Street Tinton Falls, NJ 07724Toll Free: 800 656-3344 (North America only)Tel: +1 732 212-4700
Europe/Africa/Middle East Auf der Heide 2 53947 Nettersheim, GermanyTel: +49 2486 809-0
Internormen Product Line Friedensstraße 41 68804 Altlußheim, GermanyTel: +49 6205 2094-0
Begerow Product LineAn den Nahewiesen 24 55450 Langenlonsheim, GermanyTel: +49 6704 204-0
ChinaNo. 3, Lane 280, Linhong Road Changning District, 200335 Shanghai, P.R. ChinaTel: +86 21 5200-0099
Singapore4 Loyang Lane #04-01/02 Singapore 508914Tel: +65 6825-1668
BrazilAv. Julia Gaioli, 474 – Bonsucesso 07251-500 – Guarulhos, BrazilTel: +55 11 2465-8822
8
Restrainer basketsHeavy-duty, electro-polished SS 316, perforated plate baskets (included with housing) allow use of filter bags and HAYFLOW™ filter elements up to differential pressures of 36 psi (2.5 bar). Available in all standard sizes, fitting all Eaton bag filter housings. Specially designed restrainer baskets, including construction options such as HASTELLOY® or Epoxy coated, are available. Standard baskets can be used in combination with adaptor rings for retrofitting other types of housings.
LOFNETIC magnetsMagnet assemblies are inserted into the filter bag during filtration. They are a combination of bag positioner fitted in the center with a magnetic bar(s). Filter bag lifetime is extended by retaining magnetic particles, such as chips and fines, preventing deposition onto the filter media. They also retain finer magnetic dust when using filter bags with coarser retention rating. LOFNETIC magnets are available in size 01 and 02 filter bags using one or two SS 316-covered magnetic bars.
Insertion toolsHighly recommended for all installations and mandatory for some, insertion tools ensure correct positioning of the filter bag within the basket and eliminate any “bobbing” movement of the filter bag caused by uncontrolled back pressure. This avoids any chance of the filter bag bursting. ACCUGAF™, PROGAF™ and LOFCLEAR™ 500 filter bags need to be equipped with an insertion tool. A special, new collar design firmly fixes the insertion tool inside the filter bag during filtration. They are available in sizes 01 and 02.
Leg assembliesHeight-adjustable leg assemblies are standard for size 01 and 02 TOPLINE™, FLOWLINE™ and SIDELINE™ single bag filter housings and are optional for ECOLINE™ single bag filter housings. Wall mounting brackets are also available.
Displacement balloonsInserting a displacement balloon inside the filter bag minimizes the amount of residual liquid present in the filter bag and reduces product loss. This eases the changing of the filter bag, eliminating the need for expensive, pressure-aided draining systems. A special, new collar design firmly positions the balloon inside the filter bag. The SS 316 balloons’ maximum Δp is 230 psi (15.9 bar). They are available in sizes 01 and 02.
Manifold modulesEaton standard pipe modules are available in SS 316. 90° elbows, flange reductions, flanged “T” sections and flange manifolds can be easily assembled to make DUOLINE™ or MODULINE™ mulit-bag filter housings based on FLOWLINE*, SIDELINE or TOPLINE size 01 or 02 single bag filter housings.
Adapter heads for open filtrationUsed in conjunction with SNAP-RING® filter bags in gravity feed, open systems. Adapter heads are available in SS 316 and polypropylene with a 1.5” NPT (BSP) connection for pressures to 20 psi (1.4 bar).
Gaskets and O-ring sealsAs standard, Eaton metal bag filter housings are fitted with Buna-N® O-rings. Plastic housings have Viton® O-rings. Other material options, such as EPDM, Viton, PTFE encapsulated Viton or silicone rubber, are available as flat gaskets. The options offer a variety of chemical and thermal resistances to meet a multitude of uses and applications.
Mesh strainersBag filter housings may be fitted with SS 316 mesh lined strainers in place of baskets to convert them to strainer filters. Mesh strainers are available in four standard sizes: 01, 02, 03 and 04. Retention ratings are 25, 50, 100, 150, 250, 400 and 800 µm, respectively.
Hold-down ringsECOLINE, SIDELINE, FLOWLINE, POLYLINE™ and MAXILINE™ MBF bag filter housings are fitted with different hold-down rings (included with housing). They hold the filter bag securely inside the restrainer basket, which in turn is positioned correctly within the housing.
MiscellaneousGauges, vents, eye-bolts, clamp-screws, V-clamps, center-bolts, butterfly and ball valves are all available as accessories or spare parts to fit Eaton’s various bag filter housings. * Available in the US only. HASTELLOY® is a registered trademark of Haynes International Inc. Viton® is a registered trademark of E. I. du Pont de Nemours and company.
03
02
01 07
04
08
09
10
11
06
05SPLASH GUARD option for added safety
• Helps protect operators from unexpected pressurized spray and discharge
• Reduces operator exposure to potentially hazardous material
• Provides additional eye and face protection
USEF-FBH-19
10-2014
Mechanically Cleaned Filters & Strainer////////////////////////TECHNICAL INFORMATION Bag Filter Housing Accessories