Solutions for remote radios and cell sites · 2019-01-18 · 47 RF PTTA FTTA FTTA XTTA PTTA FTTA...

4
Edition 2018/10 Wireless infrastructure Solutions for remote radios and cell sites

Transcript of Solutions for remote radios and cell sites · 2019-01-18 · 47 RF PTTA FTTA FTTA XTTA PTTA FTTA...

Edition 2018/10

Wireless infrastructureSolutions for remote radios and cell sites

46 HUBER+SUHNER Wireless infrastructure

MASTERLINE Extreme (MLE)Multi-riser cable with compact divider

MASTERLINE Extreme with Q-ODC-2 connectors is an efficient solution in terms of ease of installation, cost and required space on the mast. The compact divider minimises the wind-load and can be fed through small holes (80 mm diameter). The ruggedised push-pull connector Q-ODC allows the installer to connect the RRH jumper cables with a single "click", making it a genuine "plug & play" cabling system. MLE with Q-ODC is available to support up to 12 remote radios.

MASTERLINE Extreme with one Q-ODC-12 connector allows the installer to connect 6 RRH jumper cables with a single "click" and can even be installed through holes with a diameter of 20 mm. The Q-ODC-12 connector has the highest fiber density, based on the proven QN push-pull mating system and can connect 12 fibers in one mating step.

MASTERLINE Extreme is the preferred choice of network installers who require trouble free, reliable andefficient field deployments. HUBER+SUHNER s̀ MASTERLINE Extreme product family is unique in the market and provides the best value for money.

47

RF

PTTA

FTTA

FTTA

XTTA

PTTA

FTTA

FTTA

FTTA

RFXTTA FTTA PTTA HTTA

HUBER+SUHNER Wireless infrastructure

MLE

/MLE

P

Preferred FTTA solutionup to 12 RRH

Cost efficient installation Short lead timeStock items

LISCA RF jumper

page 152

Power jumpers (optional)

page 41

MASTERLINE Extreme Power

page 54

Mounting clamps

page 128

CTB 19" patching box

page 124

Overlength box

page 123

LC patchcord

page 127

MASTERLINE Extreme (MLE)

Multi-riser cable with compact divider

Radio FrequencyFTTA, PTTA and HTTA Fiber-To-The-Antenna Power-To-The-Antenna Hybrid-To-The-Antenna

Q-ODC RRH jumperQ-ODC-12 RRH jumper

pages 32, 54

MASTERLINE Extreme with Q-ODCMASTERLINE Extreme with Q-ODC-12

pages 44, 47

154 HUBER+SUHNER Wireless infrastructure

Overview of ODC-2 connector types

Type Type new Connector Dust cap

A1 ODP1 ODC-2 plug screwed cap with pulling feature

IP68

A4 ODP2 screwed cap with chain IP68

E1 ODE1 ODC-2 extension (socket type)

screwed cap IP68

E3 ODE2 screwed cap with chain IP68

C1 ODS1 ODC-2 socket,square small

screwed capIP68

C3 ODS2 screwed cap with chainIP68

B3 ODR1 ODC-2 socket, hexagonal,mounted from rear

screwed cap IP68

B4 ODR2 screwed cap with chain IP68

ODC®-2 outdoor connector

Fiber optic interfaces for remote radio heads

ODC – worldwide the most often installed remote radio interface

We believe there is no country in the world in which ODC assemblies have not been installed yet. There is no other RRH interface which is used more often and which was chosen by more system vendors.

The success comes from the fact that ODC is an extremely robust outdoor connector which withstands all installation hazards – and most importantly – does not permit handling errors. ODC makes mobile networks more reliable and guarantees 100 % performance.