Solid Motor Casing & Design
-
Upload
truongduong -
Category
Documents
-
view
276 -
download
8
Transcript of Solid Motor Casing & Design
Solid Motor Casing & Design
Solid Design Team:
Tony, Jason, Andrew, Tarique, Esteban, Jack 1
Quick Recap
2
Motor and Propellant Selection● Non-Toxic
● Non-Detonable
● HTPB/AP/AL Composite
Aerotech L2200G-P Mojave Green
Design Process
3
● Payload
● Drogue Chute
● Payload/Avionics
● Main Chute
● Motor and Casing
4
What we know:● Peak Thrust ≈ 3100N
● Burn Duration ≈ 2.4s
● Dimensions
What we need to know:● Chamber Pressure
● Chamber Temperature
Motor Case Design Considerations
(in)
5
What we know:● Peak Thrust ≈ 3100N
● Burn Duration ≈ 2.4s
● Dimensions
What we need to know:● Chamber Pressure
● Gas Exit Velocity
● Gas Exit Temperature
Nozzle Design Considerations
6
What we know:● Motor Overall Performance
What we need to know:● Nothing
Igniter Considerations
Solid Rocket Motor
7
● Case
● Solid Propellant
● Igniter
● Nozzle
Motor Case Loadings/Stresses
8
(1)
Motor Case Materials● Composite
o E-glass
o Aramid (Kevlar 49)
o Carbon fiber
● Metalo Titanium alloy
o Alloy steel
o Aluminum alloy 2024
● Combination
9
(1)
Composites
10
(3)
Filament Winding
● Orientation of Filament
o Compromise
11
(1)
12(1)
Metals
● Titanium alloyo Heavy
o Good strength to weight ratio
● Alloy steelo Heavier
o Strongest
● Aluminumo Provides good strength to weight ratio
o Lightest13
14(1)
Nozzles
There are five types
● Fixed (a)
● Movable (b)
● Submerged (c)
● Extendible (d)
● Blast-Tube-Mounted (e)
15
Nozzles: Design and Construction
● Ablatively Cooled
● Steel or aluminum Shells
● Composite ablative liners
16
17
Nozzle Design Decision
WE’RE NOT BUILDING ONE!!
Why?!?
18
Nozzle Selection
● Aerotech L2200G-P Mojave Green and RMS
75/5120 kit comes with a nozzle
19
Solid Rocket Motor ExpertRobert Watson
Robert at BuyRocketMotors.com
817-494-3834
www.BuyRocketMotors.com
20
Igniters
Pyrogens
Pyrotechnic
21
Igniters
Most frequent is Electroexplosive device
(Pyrotechnic)
● Bridgewire
22
NASA- Solid Rocket Motor Igniters March 1971 pg. 45
http://electronicpackaging.asmedigitalcollection.asme.org/article.aspx?articleid=1408779
http://electronicpackaging.asmedigitalcollection.asme.org/article.aspx?article
id=1408779
Field Trip?
24
Summary● Motor Case: 2024 Aluminum Alloy
o Lightweight
o Capable of enduring thermal and pressure loads
o Machined or Off-The-Shelf (TBD)
● Nozzle: Built into Motoro Saves time and money
o Redundant to build additional nozzle
● Igniter: Bridgewire explosiveo Reliable
o Good “performance”
o Cheap
25
Whats Next?
● Propellant Combustion
o Burn rate
o Flame Pattern
o Ignition Characteristics
● Propellant Stability
o Acoustic Resonance
o Ignition Wire Configurations
o Internal Gas Flow Cavity Considerations
26
References
(1) Rocket Propulsion Elements, 8th Edition. Sutton, George P. and Biblarz, Oscar.
(2) Solid Rocket Motor Igniters. NASA
(3) Cowles, Devon K. "Design of a Rocket Motor Casing." Diss. Rensselaer Polytechnic Institute, 2012. Print.
27
Questions?28