SOLENOID, PNEUMATIC AND MANIFOLD VALVES Series 4 valves ... · valves and solenoid valves 3/2, 5/2...
Transcript of SOLENOID, PNEUMATIC AND MANIFOLD VALVES Series 4 valves ... · valves and solenoid valves 3/2, 5/2...
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESSOLENOID, PNEUMATIC AND MANIFOLD VALVES > VALVES AND SOLENOID VALVES 2019
2.15.01
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
Series 4 valves and solenoid valves
3/2, 5/2 and 5/3-way CC, CO
Ports: G1/8, G1/4, G3/8, G1/2
Series 4 valves are equipped with a
manual override which allows a stable
operation and they are particularly
suitable for mounting in arduous
conditions.
All these valves can be operated
by solenoids Series U, G A8 and H8.
Moreover, valves with ports G1/2 only
can be supplied with solenoids Series A6
(32x32).
Pneumatically actuated valves 3/2
NC become NO when the supply is on
connection 3.
» The different ports
allow flows from 650
to 4000 Nl/min
» New models available:
with G3/8 ports and
1800 Nl/min flow
Series 4 solenoid valves have been
designed in the 3/2, 5/2, 5/3 versions
and with the following two devices of
actuation:
- electropneumatically actuated
with mechanical spring return
- electropneumatically actuated and return
with external and internal air pressure
supply
GENERAL DATA
Construction balanced spool type
Valve functions 3/2 - 5/2 - 5/3-way CC, CO
Materials AL body and subbases
stainless steel spool
technopolymer end cover
NBR PU seals
Ports G1/8 - G1/4 - G3/8 - G1/2
Installation in any position
Operating temperature 0 ÷ 60°C (with dry air at -20°C)
Operating pressure see table
Medium filtered air, without lubrication. If lubricated air is used, it is recommended to use ISOVG32 oil.
Once applied the lubrication should never be interrupted.
New models
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESVALVES AND SOLENOID VALVES
2.15.02
2019 SOLENOID, PNEUMATIC AND MANIFOLD VALVES
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
>
CODING EXAMPLE
4 SERIES
5 NUMBER OF WAYS - POSITIONS:
3 = 3/2 NC
4 = 3/2 NO
5 = 5/2
6 = 5/3 CC
7 = 5/3 CO
4 PORTS:
2C = G1/2
2N = G1/2 (high flow)
3 = G3/8
4 = G1/4
8 = G1/8
015 ACTUATION:
011 = double solenoid (horizontal solenoids)
V11 = double solenoid (vertical solenoids) for G1/4 port only
E11 = double solenoid external servo-command
E15 = single solenoid external servo-command
015 = single solenoid, spring return (horizontal solenoids)
V15 = single solenoid, spring return (vertical solenoid) for G1/4 port only
016 = single solenoid, pneumatic spring return (horizontal solenoid)
V16 = single solenoid, pneumatic spring return (vertical solenoid) for G1/4 port only
33 = pneumatic pneumatic
34 = pneumatic differential
35 = pneumatic spring
22 SOLENOID INTERFACE::
22 = mech. sol. 22 x 22
50 = mech. sol. 32 x 32 (G1/2 only)
U7 ENCAPSULATING MATERIAL / SOLENOID DIMENSIONS:
A6 = PPS / 32 x 32 (G1/2 only)
A8 = PPS / 30 x 30
G7 = PA / 22 x 22
G8 = PA / 30 x 30 (24 V DC only)
G9 = PA / 22 x 58
H8 = PA 6 V0 / 30 x 30
U7 = PET / 22 x 22
7 SOLENOID VOLTAGE:
see solenoids section on page 2.2.35.01
TYPE OF MANUAL OVERRIDE:
= bistable, standard
IL = bistable, lever type (available on demand)
IM = monostable (available on demand)
4 5 4 - 015 - 22 - U7 7
TYPES OF MANUAL OVERRIDE
Example of solenoid valve with a bistable standard manual
override.
Example of solenoid monostable valve (IM) and bistable valve
with a lever type manual override (IL). Both versions are available
on demand. To order them it is necessary to add IM or IL at the end
of the code. Code ex.: 454-015-22-U77IL.
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESSOLENOID, PNEUMATIC AND MANIFOLD VALVES > VALVES AND SOLENOID VALVES 2019
2.15.03
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
3/2-way solenoid valve G1/8, monostable - Mod. 438... and 448...
These solenoid valves, which have
electropneumatic actuation and
spring return, are available in the NC
(closed) or NO (open) version.
Mod. Function Flow rate Qn (Nl/min) Operating pressure (bar) Symbol
438-015-22 3/2 NC 650 2.5 ÷ 10 EV10
438-016-22 3/2 NC 650 2.5 ÷ 10 EV16
448-015-22 3/2 NO 650 2.5 ÷ 10 EV12
448-016-22 3/2 NO 650 2.5 ÷ 10 EV17
3/2-way solenoid valve G1/8, bistable - Mod. 438-011...
These solenoid valves, which have
electropneumatic actuation and
return, assume the NC (closed) or NO
(open) operating status depending
on the last pulse received.
Mod. Function Flow rate Qn (Nl/min) Operating pressure (bar)
438-011-22 3/2 650 2 ÷ 10
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESVALVES AND SOLENOID VALVES
2.15.04
2019 SOLENOID, PNEUMATIC AND MANIFOLD VALVES
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
>
5/2-way solenoid valves, G1/8, monostable - Mod 458...
These solenoid valves, which
have electropneumatic actuation
and spring return, are suitable for
operating double-acting cylinders.
Mod. Function Flow rate Qn (Nl/min) Operating pressure (bar) Symbol
458-015-22 5/2 650 2.5 ÷ 10 EV18
458-016-22 5/2 650 2.5 ÷ 10 EV21
5/2-way solenoid valves, G1/8, bistable - Mod 458-011...
These solenoid valves, with
electropneumatic actuation and
return, are suitable for operating
double-acting cylinders.
Mod. Function Flow rate Qn (Nl/min) Operating pressure (bar)
458-011-22 5/2 650 2 ÷ 10
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESSOLENOID, PNEUMATIC AND MANIFOLD VALVES > VALVES AND SOLENOID VALVES 2019
2.15.05
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
5/3-way solenoid valve, G1/8 - Mod. 468-011... and 478-011...
CC = Centres Closed
CO = Centres Open
Mod. Function Flow rate Qn (Nl/min) Operating pressure (bar) Symbol
468-011-22 5/3 CC 600 2.5 ÷ 10 EV28
478-011-22 5/3 CO 600 2.5 ÷ 10 EV32
3/2-way solenoid valve, G1/4, monostable Mod. 434 and Mod. 444
These solenoid valves, which have
electropneumatic actuation and
spring return, are available in the NC
(closed) or NO (open) version.
Mod. Function Flow rate Qn (Nl/min) Operating pressure (bar) Symbol
434-015-22 3/2 NC 1250 2.5 ÷ 10 EV10
434-016-22 3/2 NC 1250 2.5 ÷ 10 EV16
444-015-22 3/2 NO 1250 2.5 ÷ 10 EV12
444-016-22 3/2 NO 1250 2.5 ÷ 10 EV17
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESVALVES AND SOLENOID VALVES
2.15.06
2019 SOLENOID, PNEUMATIC AND MANIFOLD VALVES
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
>
3/2-way solenoid valve, G1/4, bistable - Mod. 434-011...
These solenoid valves, which have
electropneumatic actuation and
return, assume the NC (closed) or
NO (open) position depending on
the last pulse received.
Mod. Function Flow rate Qn (Nl/min) Operating pressure (bar)
434-011-22 3/2 1250 2 ÷ 10
5/2-way solenoid valve, G1/4, monostable - Mod. 454...
These solenoid valves, which
have electropneumatic actuation
and spring return, are suitable for
operating double-acting cylinders.
Mod. Function Flow rate Qn (Nl/min) Operating pressure (bar) Symbol
454-015-22 5/2 1250 2.5 ÷ 10 EV18
454-016-22 5/2 1250 2.5 ÷ 10 EV21
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESSOLENOID, PNEUMATIC AND MANIFOLD VALVES > VALVES AND SOLENOID VALVES 2019
2.15.07
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
5/2-way solenoid valve, G1/4, bistable - Mod. 454-011...
These solenoid valves, which have
electropneumatic actuation and
return, are suitable for operating
double-acting cylinders.
Mod. Function Flow rate Qn (Nl/min) Operating pressure (bar)
454-011-22 5/2 1250 2 ÷ 10
5/2-way solenoid valve, G1/4, monostable - Mod. 454-V...
These solenoid valves, which have
electropneumatic actuation
and spring or pneumatic spring
return are suitable for operating
double-acting cylinders.
Mod. Function Flow rate Qn (Nl/min) Operating pressure (bar) Symbol
454-V15-22 5/2 1250 2.5 ÷ 10 EV18
454-V16-22 5/2 1250 2.5 ÷ 10 EV21
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESVALVES AND SOLENOID VALVES
2.15.08
2019 SOLENOID, PNEUMATIC AND MANIFOLD VALVES
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
>
5/2-way solenoid valve, G1/4, bistable - Mod. 454-V11...
These solenoid valves, which have
electropneumatic actuation and
return, are suitable for operating
double-acting cylinders.
Mod. Function Flow rate Qn (Nl/min) Operating pressure (bar)
454-V11-22 5/2 1250 2 ÷ 10
5/3-way solenoid valve, G1/4 - Mod. 464-011... e 474-011...
CC = Centres Closed
CO = Centres Open
Mod. Function Flow rate Qn (Nl/min) Operating pressure (bar) Symbol
464-011-22 5/3 CC 1250 2.5 ÷ 10 EV28
474-011-22 5/3 CO 1250 2.5 ÷ 10 EV32
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESSOLENOID, PNEUMATIC AND MANIFOLD VALVES > VALVES AND SOLENOID VALVES 2019
2.15.09
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
3/2-way solenoid valve, G3/8, monostable Mod. 433... and Mod. 443...
These solenoid valves, which have
electropneumatic actuation and
spring return, are available in the NC
(closed) or NO (open) version.
The E15 version can work both NC
and NO.
Mod. Function Flow Qn (Nl/min) Working pressure (bar) Min. pilot pressure (bar) Symbol
433-015-22 3/2 NC 1800 2.5 ÷ 10 - EV10
433-E15-22 3/2 1800 -0.9 ÷ 10 2.5 EV13
433-016-22 3/2 NC 1800 2.5 ÷ 10 - EV16
443-015-22 3/2 NO 1800 2.5 ÷ 10 - EV12
443-016-22 3/2 NO 1800 2.5 ÷ 10 - EV17
New
3/2-way solenoid valve, G3/8, bistable - Mod. 433-011...
These solenoid valves, which have
electropneumatic actuation and
return, assume the NC (closed) or
NO (open) position depending on
the last pulse received.
The E15 version can work both NC
and NO.
Mod. Function Flow Qn (Nl/min) Working pressure (bar) Min. pilot pressure (bar) Symbol
433-011-22 3/2 1800 2 ÷ 10 - EV14
433-E11-22 3/2 1800 -0.9 ÷ 10 2 EV15
New
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESVALVES AND SOLENOID VALVES
2.15.10
2019 SOLENOID, PNEUMATIC AND MANIFOLD VALVES
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
>
5/2-way solenoid valve, G3/8, monostable - Mod. 453...
These solenoid valves, which
have electropneumatic actuation
and spring return, are suitable for
operating double-acting cylinders.
Mod. Function Flow Qn (Nl/min) Working pressure (bar) Min. pilot pressure (bar) Symbol
453-015-22 5/2 1800 2.5 ÷ 10 - EV18
453-E15-22 5/2 1800 -0.9 ÷ 10 2.5 EV19
453-016-22 5/2 1800 2.5 ÷ 10 - EV21
New
5/2-way solenoid valve, G3/8, bistable - Mod. 453-011...
These solenoid valves, which have
electropneumatic actuation and
return, are suitable for operating
double-acting cylinders.
Mod. Function Flow Qn (Nl/min) Working pressure (bar) Min. pilot pressure (bar) Symbol
453-011-22 5/2 1800 2 ÷ 10 - EV23
453-E11-22 5/2 1800 -0.9 ÷ 10 2 EV25
New
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESSOLENOID, PNEUMATIC AND MANIFOLD VALVES > VALVES AND SOLENOID VALVES 2019
2.15.11
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
5/3-way solenoid valve, G3/8 - Mod. 463-011... and 473-011...
CC = Centres Closed
CO = Centres Open
Mod. Function Flow Qn (Nl/min) Working pressure (bar) Min. pilot pressure (bar) Symbol
463-011-22 5/3 CC 1600 2.5 ÷ 10 - EV28
463-E11-22 5/3 CC 1600 -0.9 ÷ 10 2.5 EV29
473-011-22 5/3 CO 1600 2.5 ÷ 10 - EV32
473-E11-22 5/3 CO 1600 -0.9 ÷ 10 2.5 EV34
New
5/2-way solenoid valve, G1/2, monostable - Mod. 452C...
These solenoid valves, which have
electropneumatic actuation and
spring or pneumatic spring return
are suitable for operating double-
acting cylinders.
Mod. Function Flow rate Qn (Nl/min) Operating pressure (bar) Symbol
452C-015-50-A6* 5/2 2500 2.5 ÷ 10 EV18 * choose the desired voltage
452C-016-50-A6* 5/2 2500 2.5 ÷ 10 EV21 * choose the desired voltage
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESVALVES AND SOLENOID VALVES
2.15.12
2019 SOLENOID, PNEUMATIC AND MANIFOLD VALVES
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
>
5/2-way solenoid valve, G1/2, bistable - Mod. 452C-011...
These solenoid valves, which have
electropneumatic actuation and
return, are suitable for operating
double-acting cylinders.
Mod. Function Flow rate Qn (Nl/min) Operating pressure (bar)
452C-011-50-A6* 5/2 2500 2 ÷ 10 * choose the desired voltage
5/2-way solenoid valve, G1/2, monostable - Mod. 452N-...
These solenoid valves, which have
electropneumatic actuation and
spring or pneumatic spring return
are suitable for operating double-
acting cylinders.
Mod. Function Flow rate Qn (Nl/min) min. pilot Pressure (bar) Working pressure (bar) Symbol
452N-015-22 5/2 4000 - 2.5 ÷ 10 EV18
452N-016-22 5/2 4000 - 2.5 ÷ 10 EV21
452N-E15-22 5/2 4000 2.5 -0.9 ÷ 10 EV19
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESSOLENOID, PNEUMATIC AND MANIFOLD VALVES > VALVES AND SOLENOID VALVES 2019
2.15.13
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
5/2-way solenoid valve, G1/2, bistable - Mod. 452N-...
These solenoid valves, which have
electropneumatic actuation and
return, are suitable for operating
double-acting cylinders.
Mod. Function Flow rate Qn (Nl/min) min. pilot Pressure (bar) Working pressure (bar) Symbol
452N-011-22 5/2 4000 - 2 ÷ 10 EV23
452N-E11-22 5/2 4000 2 -0.9 ÷ 10 EV25
5/3-way solenoid valve, G1/2, bistable - Mod. 462N-..., 472N-...
These solenoid valves, which have
electropneumatic actuation and
return, are suitable for operating
double-acting cylinders.
Mod. Function Flow rate Qn (Nl/min) min. pilot Pressure (bar) Working pressure (bar) Symbol
462N-011-22 5/3 CC 3300 - 2.5 ÷ 10 EV28
462N-E11-22 5/3 CC 3300 2.5 -0.9 ÷ 10 EV29
472N-011-22 5/3 CO 3300 - 2.5 ÷ 10 EV32
472N-E11-22 5/3 CO 3300 2.5 -0.9 ÷ 10 EV34
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESVALVES AND SOLENOID VALVES
2.15.14
2019 SOLENOID, PNEUMATIC AND MANIFOLD VALVES
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
>
3/2-way valve, G1/8 port, monostable Mod. 438-35
Mod. Mounting Function Flow rate Qn (Nl/min) Min. pilot pressure (bar) Working pressure (bar)
438-35 in-line/on manifold 3/2 NC 700 2.5 -0.9 ÷ 10
5/2-way valve, G1/8 port, monostable Mod. 458-35
Mod. Mounting Function Flow rate Qn (Nl/min) Min. pilot pressure (bar) Working pressure (bar)
458-35 in-line/manifold 5/2 700 2.5 -0.9 ÷ 10
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESSOLENOID, PNEUMATIC AND MANIFOLD VALVES > VALVES AND SOLENOID VALVES 2019
2.15.15
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
3/2-way valve, G1/8 port, bistable Mod. 438
These valves can work NC or NO
according to the last pilot signal.
Mod. Mounting Function Flow rate Qn (Nl/min) min. pilot Pressure (bar) Working pressure (bar) Symbol
438-33 in-line/on manifold 3/2 700 2 -0.9 ÷ 10 VP02
438-34 in-line/on manifold 3/2 700 2 -0.9 ÷ 10 VP03
5/2-way valve, G1/8 port, bistable Mod. 458
Mod. Mounting Function Flow rate Qn (Nl/min) min. pilot Pressure (bar) Working pressure (bar) Symbol
458-33 in-line/on manifold 5/2 700 2 -0.9 ÷ 10 VP06
458-34 in-line/on manifold 5/2 700 2 -0.9 ÷ 10 VP05
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESVALVES AND SOLENOID VALVES
2.15.16
2019 SOLENOID, PNEUMATIC AND MANIFOLD VALVES
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
>
3/2-way valve, G1/4 port, monostable Mod. 434-35
This valve can work NC or NO
depending on where the power
supply is connected.
Mod. Mounting Function Flow rate Qn (Nl/min) min. pilot Pressure (bar) Working pressure (bar)
434-35 in-line/on manifold 3/2 NC 1250 2.5 -0.9 ÷ 10
5/2-way valve, G1/4 port, monostable Mod. 454-35
Mod. Mounting Function Flow rate Qn (Nl/min) Min. pilot pressure (bar) Working pressure (bar)
454-35 in-line/on manifold 5/2 1250 2.5 -0.9 ÷ 10
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESSOLENOID, PNEUMATIC AND MANIFOLD VALVES > VALVES AND SOLENOID VALVES 2019
2.15.17
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
3/2-way valve, G1/4 port, bistable Mod. 434
These valves can work NC or NO
according to the last pilot signal.
Mod. Mounting Function Flow rate Qn (Nl/min) min. pilot Pressure (bar) Working pressure (bar) Symbol
434-33 in-line/on manifold 3/2 NC 1250 2 -0.9 ÷ 10 VP02
434-34 in-line/on manifold 3/2 NC 1250 2 -0.9 ÷ 10 VP03
5/2-way valve, G1/4 port, bistable Mod. 454
Mod. Mounting Function Flow rate Qn (Nl/min) min. pilot Pressure (bar) Working pressure (bar) Symbol
454-33 in-line/on manifold 5/2 1250 2 -0.9 ÷ 10 VP06
454-34 in-line/on manifold 5/2 1250 2 -0.9 ÷ 10 VP05
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESVALVES AND SOLENOID VALVES
2.15.18
2019 SOLENOID, PNEUMATIC AND MANIFOLD VALVES
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
>
5/3-way C.C. valve, G1/8, monostable, with central stable position
CC = Centres Closed
Mod. Mounting Function Flow rate Qn (Nl/min) min. pilot Pressure (bar) Working pressure (bar)
468-33 in-line/on manifold 5/3 CC 700 2.5 -0.9 ÷ 10
5/3-way CC CO valve, G1/4, monostable, central stable position
CC = Centres Closed
CO = Centres Open
Mod. Mounting Function Flow rate Qn (Nl/min) min. pilot Pressure (bar) Working pressure (bar) Symbol
464-33 in-line/on manifold 5/3 CC 1250 2.5 -0.9 ÷ 10 VP08
474-33 in-line/on manifold 5/3 CO 1200 2.5 -0.9 ÷ 10 VP09
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESSOLENOID, PNEUMATIC AND MANIFOLD VALVES > VALVES AND SOLENOID VALVES 2019
2.15.19
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
3/2-way valve, G3/8 port, monostable Mod. 433-35
This valve can work NC or NO
depending on where the power
supply is connected.
Mod. Mounting Function Flow rate Qn (Nl/min) min. pilot Pressure (bar) Working pressure (bar)
433-35 in-line/on manifold 3/2 NC 1800 2.5 -0.9 ÷ 10
New
5/2-way valve, G3/8 port, monostable Mod. 453-35
Mod. Mounting Function Flow rate Qn (Nl/min) Min. pilot pressure (bar) Working pressure (bar)
453-35 in-line/on manifold 5/2 1800 2.5 -0.9 ÷ 10
New
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESVALVES AND SOLENOID VALVES
2.15.20
2019 SOLENOID, PNEUMATIC AND MANIFOLD VALVES
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
>
3/2-way valve, G3/8 port, bistable Mod. 433
These valves can work NC or NO
according to the last pilot signal.
Mod. Mounting Function Flow rate Qn (Nl/min) min. pilot Pressure (bar) Working pressure (bar) Symbol
433-33 in-line/on manifold 3/2 NC 1800 2 -0.9 ÷ 10 VP02
433-34 in-line/on manifold 3/2 NC 1800 2 -0.9 ÷ 10 VP03
New
5/2-way valve, G3/8 port, bistable Mod. 453
Mod. Mounting Function Flow rate Qn (Nl/min) min. pilot Pressure (bar) Working pressure (bar) Symbol
453-33 in-line/on manifold 5/2 1800 2 -0.9 ÷ 10 VP06
453-34 in-line/on manifold 5/2 1800 2 -0.9 ÷ 10 VP05
New
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESSOLENOID, PNEUMATIC AND MANIFOLD VALVES > VALVES AND SOLENOID VALVES 2019
2.15.21
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
5/3-way CC CO valve, G3/8, monostable, central stable position
CC = Centres Closed
CO = Centres Open
Mod. Mounting Function Flow rate Qn (Nl/min) min. pilot Pressure (bar) Working pressure (bar) Symbol
463-33 in-line/on manifold 5/3 CC 1600 2.5 -0.9 ÷ 10 VP08
473-33 in-line/on manifold 5/3 CO 1600 2.5 -0.9 ÷ 10 VP09
5/2-way valve, G1/2 port, monostable Mod. 452C-35
Mod. Mounting Function Flow rate Qn (Nl/min) Min. pilot pressure (bar) Working pressure (bar)
452C-35 in-line 5/2 2500 2.5 -0.9 ÷ 10
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESVALVES AND SOLENOID VALVES
2.15.22
2019 SOLENOID, PNEUMATIC AND MANIFOLD VALVES
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
>
5/2-way valve, G1/2 port, bistable Mod. 452C
Mod. Mounting Function Flow rate Qn (Nl/min) min. pilot Pressure (bar) Working pressure (bar) Symbol
452C-33 in-line 5/2 2500 2 -0.9 ÷ 10 VP06
452C-34 in-line 5/2 2500 2 -0.9 ÷ 10 VP05
5/2-way valve, G1/2 port, monostable Mod. 452N-35
Mod. Mounting Function Flow rate Qn (Nl/min) Min. pilot pressure (bar) Working pressure (bar)
452N-35 in-line 5/2 4000 2.5 -0.9 ÷ 10
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESSOLENOID, PNEUMATIC AND MANIFOLD VALVES > VALVES AND SOLENOID VALVES 2019
2.15.23
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
5/2-way valve, G1/2 port, bistable Mod. 452N-33
Mod. Mounting Function Flow rate Qn (Nl/min) min. pilot Pressure (bar) Working pressure (bar) Symbol
452N-33 in-line 5/2 4000 2 -0.9 ÷ 10 VP06
Manifold base with common exhausts
DIMENSIONS
Mod. A B C D E F G H L1 L2 M N
CNVL-42 28 33 69.5 46 12 29 23.5 78 89 77 4.3 14
CNVL-43 28 33 69.5 46 12 29 23.5 78 122 110 4.3 14
CNVL-44 28 33 69.5 46 12 29 23.5 78 155 143 4.3 14
CNVL-45 28 33 69.5 46 12 29 23.5 78 188 176 4.3 14
CNVL-46 28 33 69.5 46 12 29 23.5 78 221 209 4.3 14
For valves Series 4, G1/8 (3/2, 5/2 or 5/3-way)
The following is supplied with:
1x manifold
1x pair of fixing screws for valve position
1x interface seal for valve positions
2x guides for valve position
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESVALVES AND SOLENOID VALVES
2.15.24
2019 SOLENOID, PNEUMATIC AND MANIFOLD VALVES
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
>
Manifold base with common exhausts
DIMENSIONS
Mod. A B C D E F G H L1 L2 M N
CNVL-52 30 34 84.5 53 26 40 35 95 94 82 4.3 15
CNVL-53 30 34 84.5 53 26 40 35 95 128 116 4.3 15
CNVL-54 30 34 84.5 53 26 40 35 95 162 150 4.3 15
CNVL-55 30 34 84.5 53 26 40 35 95 196 184 4.3 15
CNVL-56 30 34 84.5 53 26 40 35 95 230 218 4.3 15
For valves Series 4, G1/4 (3/2, 5/2 or 5/3-way)
The following is supplied :
1x manifold
1x pair of fixing screws for valve position
1x interface seal for valve positions
2x guides for valve position
Manifold base with common exhausts
Mod. A B C D E F G H L1 L2 M
CNVL-62 29.5 35 108 70 19.5 39 33.5 120 94.5 82.5 5.5
CNVL-63 29.5 35 108 70 19.5 39 33.5 120 130 118 5.5
CNVL-64 29.5 35 108 70 19.5 39 33.5 120 166 154 5.5
CNVL-65 29.5 35 108 70 19.5 39 33.5 120 201 189 5.5
CNVL-66 29.5 35 108 70 19.5 39 33.5 120 237 225 5.5
For valves Series 4, G3/8 (3/2, 5/2 or 5/3-way)
The following is supplied with:
1x manifold
1x pair of fixing screws for valve position
1x interface seal for valve positions
2x guides for valve position
New
Products designed for industrial applications.
SERIES 4 VALVES AND SOLENOID VALVESSOLENOID, PNEUMATIC AND MANIFOLD VALVES > VALVES AND SOLENOID VALVES 2019
2.15.25
SE
RIE
S 4
VA
LV
ES
AN
D S
OL
EN
OID
VA
LV
ES
Blanking plug Mod. TCNVL for manifolds
The following is supplied:
1x blanking plug
1x O-Ring
TCNVL/3: for Series 4, G1/8
TCNVL/5: for Series 4, G1/4
TCNVL/6: for Series 4, G3/8
Mod.
TCNVL/3
TCNVL/5
TCNVL/6
Blanking plate Mod. CNVL for manifolds
The following is supplied:
2x fixing screws
3x O-Rings
CNVL/2: for Series 4, G1/8
CNVL/3: for Series 4, G1/4
CNVL/4: for Series 4, G3/8
DIMENSIONS
Mod. A B H I M P Q R
CNVL/2 5 25.6 52 32 4.2 17 17 18
CNVL/3 5 27.8 70 33.5 4.2 18 3.5 48.5
CNVL/4 5 27.8 85 33.5 4.2 24.5 24.5 36
It is used to blank vacant positions
of a manifold.