Solar Simulator (400-1100nm) - Asahi Spectra · ND control by about 50% of initial lamp as...

4
100 80 60 40 20 0 1100 1000 900 800 700 600 500 400 300 Spectral Match Relative Intensity (%) Wavelength (nm) *JIS, Japanese industrial standards is equivalent to IEC. HAL-C100 Standard solar light (JIS*) JIS* Class AAA solar simulator (400-1100nm) Built-in AM1.5G filter Flexible illumination by light guide Adjustable light intensity No need of optical axis alignment RS232C remote control Compact entry model for introduction of photovoltaic research Features HAL-C100 HAL-C100 Solar Simulator (400-1100nm)

Transcript of Solar Simulator (400-1100nm) - Asahi Spectra · ND control by about 50% of initial lamp as...

Page 1: Solar Simulator (400-1100nm) - Asahi Spectra · ND control by about 50% of initial lamp as described in the right figure.(factory default setting) Light intensity decline due to a

Telecentric uniform illumination unit

100

80

60

40

20

011001000900800700600500400300

Spectral Match

Rel

ativ

e In

tens

ity (%

)

Wavelength (nm)

*JIS, Japanese industrial standards is equivalent to IEC.

HAL-C100Standard solar light (JIS*)

・JIS* Class AAA solar simulator (400-1100nm)・Built-in AM1.5G filter・Flexible illumination by light guide・Adjustable light intensity・No need of optical axis alignment・RS232C remote control

Compact entry model for introduction ofphotovoltaic research

Features

HAL-C100HAL-C100Solar Simulator (400-1100nm)

Page 2: Solar Simulator (400-1100nm) - Asahi Spectra · ND control by about 50% of initial lamp as described in the right figure.(factory default setting) Light intensity decline due to a

HAL-C100

Glove box

CustomLight guide

HAL-C100

Prober

HAL-C100

Source meter

Solar cell

MicroscopeSource meter

Production line

Solar cell

Mobile solar simulator

Applications Solar simulator for various inspection and research

100

80

60

40

20

011001000900800700600500400300

Spectral Match

Rel

ativ

e in

tens

ity (%

)

Wavelength (nm)*JIS, Japanese industrial standards is equivalent to IEC.

HAL-C100Standard solar light (JIS*)

Solar cell researchArtificial photosynthesis Photocatalytic research

CurrentN-typesemiconductor

P-typesemiconductor

Solar simulator

+- +

+-

- +- +

+-

- +-

ElectronH2O

O2 CO2

H

Solar simulator

Splitting Synthesis Energy

Solar simulator

Gauge port

The most suitable entry model for development and trial productionof next-generation solar cell

Flexible Configuration with Light Guide

Page 3: Solar Simulator (400-1100nm) - Asahi Spectra · ND control by about 50% of initial lamp as described in the right figure.(factory default setting) Light intensity decline due to a

Sensitivity Characteristics of Solar Cell

0

20

40

60

80

100

300 500 700 1100900Wavelength (nm)

Rel

ativ

e in

tens

ity (%

)

Dye sensitization Tandem CIGS

*JIS, Japanese industrial standards is equivalent to IEC.

Reference data

400 - 500500 - 600600 - 700700 - 800800 - 900900 - 1100

Wavelength (nm)Energy Distribution (%)

21.020.317.813.211.815.8

HAL-C10018.419.918.414.912.515.9

JIS1.141.020.970.890.940.99

Spectral Match

AAAAAA

Class

JIS C 8912-2011

Positional uniformity of irradiance (%)Temporal stability of irradiance (%)Spectral match

Item≦±2≦±1

0.75 - 1.25

≦±3≦±3

0.6 - 1.4

Class BClass A≦±10≦±10

0.4 - 2.0

Class CJIS C8912-2011

The calculated value of 1SUN in the range of 400-1100nm is about 75mW/cm2.Working distance: about 224mm

You can obtain Class A uniformity in the area 12x12mm with 1 SUN intensity when you set the ND control by about 50% of initial lamp as described in the right figure.(factory default setting)Light intensity decline due to a lamp life can be adjusted by light intensity control.Above the size of Class A area is reference value. Please note that the output of lamp varies among the manufacturing lots.

Irradiance Area30 x 30mm

Class A12 x 12mm

PC

RS232Ccable

HAL-C100

< Connection image >

The HAL-C100 can be controlled remotely via RS232C.

RS232C Remote Control

The HAL-C100 is suited for the evaluation for development and prototype of next-generation solar cell.

Compact solar simulator achieves Class AAA with fiber output system

Uniformity

JIS Classification

Spectral Match

Target Solar Cell

Irradiance time (min)

Rel

ativ

e in

tens

ity (%

)

Temporal Stability of Irradiance103

102

101

100

99

98

9740383632 3430

Class A(Less than ±1%)

*10 minutes measurement after turning on the lamp for 30 minutes.*The values are for reference only.

There is less flicker and stable output at long times.

*If you use the HAL-C100 for a long time, we recommend that you use the constant-voltage power supply so that the HAL-C100 is not influenced by the change of load.

Temporal Stability of IrradianceOur own designed AM1.5G filter corrects xenon emission lines according to Class A.This simulator can evaluate not only a crystal type, also dye- sensitized solar cells, CIGS and so on.

Page 4: Solar Simulator (400-1100nm) - Asahi Spectra · ND control by about 50% of initial lamp as described in the right figure.(factory default setting) Light intensity decline due to a

20191028.0000

*Product specifications are subject to change without notice.

Gardenia Bldg. 4F, 2-13-1 Kamijujo, Kita-ku, Tokyo 114-0034 JapanPhone: +81-3-3909-1151 / FAX: +81-3-3909-1152E-mail: [email protected]

www.asahi-spectra.comwww.asahi-spectra.comwww.asahi-spectra.com

Collimator lens

Unit: mm

φ43

φ33

φ38

33.5M674

210 - 245

Unit: mm

1000

φ13

φ12

φ10

φ25

φ20

30 15 15

ALSUSFiber bundle 5mm dia.

SUS flexible tube3010

φ10

Light guide

Main unit

Unit: mm

200 340

129

245

(392)

ModelOutput wavelength

Circuit methodInput voltage

Apparent power

Lamp typeLamp voltage, current

Lamp life

Optical axis alignmentCooling method

ShutterLight intensity control

Air Mass filterEmitting method

ControllerRemote control

Safety mechanism

Recommended environment

DimensionsWeight

: HAL-C100: 400 - 1100nm: Switching power supply: AC100V 50/60Hz (Input range: AC90 - 132V) AC200V 50/60Hz (Input range: AC198 - 264V) *Select input voltage when placing an order.: Less than 350VA (AC100V/50Hz) Less than 440VA (AC240V/50Hz): Xenon lamp 100W: 12.8 - 14V 7.2A (DC) *Representative value: 500h (Average) *When the light intensity has decreased by 50% from the initial value.: Cartridge type (Alignment-free): Forced air cooling: Pulsed motor drive: 100 - 5 (Steps) Continuously variable: Air Mass 1.5G filter: Bundled light guide: Built-in: RS232C *The cable must be less than 3m.: Xenon lamp problem, Rear door is open, Lamp usage exceeds 500 hours, Cooling fan problem, Temperature anomaly: Temperature 10 - 35 deg C Humidity 20 - 80% *Avoid condensation: 200(W) x 340(D) x 245(H)mm: 8.9kg

- HAL-C100 main unit- Lamp cartridge- Quartz light guide (1m)- Light guide adapter

- Collimator lens- AC cable (3m)- RS232C cable (1.8m)- Instruction manual

Package Contents

General Specifications

Dimensions

Options

Unit: mm

Dimensions

250

200

350

(689)

650

□12

1 SUN Checker is used for checking the light intensity(1 SUN) of HAL-C100.It is battery operated and portable.

This light guide is the option for bringing a light into a glove box.The gauge port is equipped.

IlluminatedArea (mm)

Distance(mm)

50

150

RLQL80-1

TOU-1-31

31 x 31

31 x 31

Distance(mm)

IlluminatedArea (mm)

50

78 15 x 15

15 x 15

RLQL80-05

TOU-05-15

Illuminated Area (mm)

4.5 dia.

Distance(mm)42.2

4.5mm dia. Type KLQ-5

Illuminated Area (mm)

2.5 dia.

Distance(mm)17.6

2.5mm dia. Type KLQ-2.5

Stand for Collimator Lens High Condensing Lens Telecentric uniform illumination unit

1 SUN Checker CS-30 Light Guide (TPO)