SOLAR - OMG Roofing · team in the commercial roofing industry available to help you. Our team...
Transcript of SOLAR - OMG Roofing · team in the commercial roofing industry available to help you. Our team...
SOLAR Superior productivity. Superior performance.
Typical mechanically attached single-ply roof assembly.
FASTENERS:
Membrane fasteners & plates showing "in-seam fastening"
Insulation fasteners & plates
All fasteners are driven into top flute of steel deck
ROOF LAYERS:
Roofing membrane
Cover board* (not always required or used)
Insulation
Steel deck (deck types may vary)
LAP SEAM
WE KNOW ROOFINGFor more than 35 years, OMG Roofing
Products has been a leading supplier
of fasteners and other products used
exclusively in commercial roofing
applications. We work with virtually
every roof system manufacturer, and
we have a large field sales force of
nearly 60 in North America who are on
commercial roofs every day. In short, we
know all about commercial roofing. What
works. What does not, and the best ways
to secure products – including solar
racking systems – to flat roofs. It’s what
we do, and we can help you too.
Most commercial roofing systems installed in North America today are single-ply systems that are mechanically attached. Which means they are fastened to the substrate – usually a corrugated steel deck – using screws and plates or oversize washers. The insulation and cover board (if used) is first fastened in place, and then the membrane or roof cover is installed over the top using a different set of screws and plates located along the edge or seam. The seams of the thermoplastic roof cover (i.e. PVC or TPO membrane) are then fused together using hot-air to create a seam that can be made as strong as the membrane itself.
ANATOMY OF A COMMERCIAL ROOF
WHY THIS MATTERSIt’s important to understand the anatomy of a commercial roof because OMG PowerGrip products are designed specifically for use on commercial roofs. In fact, the original PowerGrip and PowerGrip Plus products are made using the same brand and type of thermoplastic material that’s installed on the roof, and bonded to the roof cover using the same hot-air welding technique that was used to create the watertight seams on the roof. All PowerGrip products, including PowerGrip Universal, are secured directly to the structural roof deck using the same or similar fasteners that hold the roofing system in place. We know, because it’s very likely that we provided those fasteners too!
ck movement and remain
ATTACH SOLAR RACKS AS SECURELY AND AS WATERTIGHT AS THE ROOFING SYSTEM!OMG PowerGrip, PowerGrip PLUS and PowerGrip Universal are roof mounting systems designed to secure ballasted and rail-based* solar racks and other equipment virtually every type of commercial roofing system.
PowerGrip products provide a secure, water-tight connection directly to the roof deck or struc-tural members, thereby taking the wind-load off the membrane or roof cover and placing it onto the structural deck where it belongs. Once secured in place, properly installed PowerGrip products can help eliminate rack movement and remain watertight. FEATURES & BENEFITS
• Properly installed PowerGrips provide a secure anchor to the roof deck and remain watertight.
• Simple installation process saves time and labor.
• Compatible with most commercial roofing systems, regardless of material or installation method.
• Takes the wind load off of the membrane and places it onto the structural deck where it belongs.
• Helps protect roof covers from damage due to ballasted rack movement.
• Three configurations: - PowerGrip - PowerGrip Plus - PowerGrip Universal
PowerGrip secures solar racks to the building structure using proven watertight technology.
OMG PowerGrip UNIVERSAL
*Please note, only Powergrip Plus and PowerGrip Universal products may be used with rail based solar systems.
ck movement and remain
PERFORMANCE
PRODUCT TEST TEST METHOD (in general accordance with)
RESULTS
PowerGrip Universal Static Tensile Load TAS 117 (A) 3,300 lbf. (13.34 kN)
PowerGrip Universal Static Shear Load ASTM E488 2,500 lbf. (11.12 kN)
PowerGrip Universal Compressive Load ASTM D1621-10 2,000 lbf. (8.90 kN)
PowerGrip PLUS Tensile Strength TAS 117-95 (A) 2,000 lbf. (8.90 kN) minimum
PowerGrip PLUS Shear Strength ASTM E488-96 1,075 lbf. (4.78 kN) minimum
PowerGrip Tensile Strength ASTM 1761-06 305 lbf. (1.35 kN) minimum
PowerGrip Shear Strength ASTM 1761-06 305 lbf. (1.35 kN) minimum
ORDERING INFORMATION
NAME SKU PACKAGING WEIGHT
PowerGrip Universal for use on non-PVC roofsPGRPU-STD
PGRPU-STD-6PK
1
6
3.5 lbs. (1.6 Kg)
21 lbs. (9.5 Kg)
PowerGrip Universal for use on PVC roofsPGRPU-PVC
PGRPU-PVC-6PK
1
6
2.5 lbs. (1.6 Kg)
15 lbs. (6.8 Kg)
PowerGrip PLUS Call OMG Customer Ser-
vice for membrane spe-
cific SKU: 800.633.3800
8 16 lbs. (7.2 Kg)/case
PowerGrip 20 10.5 lbs. (4.73 Kg)/casePowerGrip PLUS has three times the performance of regular PowerGrip!
OMG PowerGrip PLUS
OMG PowerGrip
OMG PowerGrip UNIVERSAL
MANAGING SOLAR CONDUIT HAS NEVER BEEN EASIER.OMG Roofing Products offers a full line of industry-preferred rooftop pipe and conduit supports with sizes and configurations for every project.
OMG PipeGuards are designed to support rooftop pipes and conduit from ½- to 5-inches (10 to 125 mm) in diameter and do not require any tools. Typical installation time is less than 10 seconds!
Strut models have a 6-inch (150 mm) long base, feature a low-profile 15⁄8-in. (40 mm) galvanized strut channel, are available with or without a height adjustable rail -- adjustable from 4- to 10-inches [100 to 255 mm], making them ideal for solar thermal systems. Accommodates standard strut clamps sold separately. FEATURES & BENEFITS
• Supports steel, PVC pipe, copper tubing, solar, electrical/HVAC conduit and more!
• Wide bases prevent damage to roof covers.
• Triangle shape sheds water and provides superior stability.
• Will not rot or deteriorate.
ORDERING INFORMATION
NAME SKU BASE MATERIAL WHAT IT SUPPORTS HEIGHT QTY.
PER BOX
Mini PGM-BK EPDM Supports ½" to 1½" (10 to 40 mm) pipe dia.; replaces 2"x 4" (50 x 100 mm) wood block
1.5" (40 mm) 20
Small PGS-BK EPDM Supports ¾" to 2" (20 to 50 mm) pipe dia.; replaces 4" x 4" (100 x 100 mm) wood block
3.5" (90 mm) 20
Strut Model PGSTRUT6-BK EPDMSupports multiple pipes, various sizes up to 5" (125 mm) total diameter; replaces 4"x 4" (100 x 100 mm) wood block
4" (100 mm) 10
Height Adjustable Strut
PGSTRUT10X10HA-BK EPDM Supports multiple pipes, various sizes up to 6" (150 mm) total diameter
10" (255 mm) 5
Safety Yellow Strut
PGSTPE10-YW HDPE Supports multiple pipes, various sizes up to 6" (150 mm) total diameter
4" (100 mm) 10
Safety Yellow Height Adj. Strut
PGSTPE10X10HA-YW HDPE Supports multiple pipes, various sizes up to 6" (150 mm) total diameter
10" (255 mm) 5
Strut models are available in Safety Yellow, helping to identify potentially dangerous rooftop trip hazards.
Yellow PipeGuards are made with 100% recycled material!
ROOFING FASTENERS DESIGNED FOR THE JOB.OMG PowerGrip products are typically installed with #15, Extra Heavy Duty (XHD) Fasteners.OMG Fasteners are available in 100 packs in lengths from 2- to 6-inches (50 to 150 mm). For large volume jobs, fasteners are also available in bucket quantities of 500 to 1,000 pieces and in lengths from 2- to 16-inches (50 to 405 mm). Call for bucket quantity pricing and details.
ORDERING INFORMATION
CAT. NO. LENGTH THREAD PKG WEIGHT
XHD002X-1 2" (50 mm) Full 100 3 lbs. (1.36 Kg)
XHD003X-1 3" (75 mm) Full 100 4 lbs. (1.81 Kg)
XHD004X-1 4" (100 mm) 3" (76 mm) 100 5 lbs. (2.27 Kg)
XHD005X-1 5" (125 mm) 4" (102 mm) 100 6 lbs. (2.72 Kg)
XHD006X-1 6" (150 mm) 4" (102 mm) 100 7 lbs. (3.18 Kg)
Longer sizes available in larger quantities.
NATIONWIDE CUSTOMER SUPPORT When it comes to service, no one beats OMG Roofing Products. We have the largest directly employed field service team in the commercial roofing industry available to help you. Our team offers product demonstrations, training, job starts, fastener pull tests and much more. Let our local sales representative help with your next project.
OMG is the leading U.S. supplier of roof-ing fasteners, roof insulation adhesives, edge metal systems, retrofit roof drains, pipe supports and installation productivity enhancement tools.
Our products are available nationwide and supported by our national network of direct factory sales personnel.
For more information or an on-site demonstration, please call 800.633.3800.RM
1005
Re
v. 1
0262
018
Visit the solar section of our website to learn more about these great products.
Proud members of:
153 BOWLES ROAD, AGAWAM, MA 01001 USA800.633.3800 413.789.0252 OMGROOFING.COMOMG®, OMG PowerGrip™, OMG PipeGuard®, OMG EverSeal®, Ready-to-Roll™ and EZ-Release Liner™ are trademarks of OMG, Inc. Copyright © 2018 OMG, Inc. All rights reserved.
Superior productivity. Superior performance.