Solar Energy System TC DT - Alliance Roofing & Exteriors · install the GAF Energy solar system. TC...
2
Technical Specifications *STC: Standard Test Conditions 1000W/m 2 , 25°C, AM 1.5. For additional parameters and certifications, refer to the latest version of the GAF Energy solar system Application Instructions Model Number RI 2000 PV Laminate Silfab SLA Mono Maximum Power under STC* (Pmax) 310 Wp Open Circuit Voltage under STC (Voc) 40.25 V Maximum Power Point Voltage under STC (Vmpp) 33.05 V Short Circuit Current under STC (Isc) 9.93 A Maximum Power Point Current under STC (Impp) 9.38 A Module Efficiency under STC (ηm) 19.0% Temperature Correction Factor TC Voc -0.30%/C Cells per module 60 Cell type Monocrystalline PV Connector Type PV wire with MC4 compatible PV Laminate Front 3.2 mm high transmittance, tempered, ar coating PV Laminate Back Multi-layer Polymer Backsheet Frame Black Powder Coated Aluminum Weight 44.4 lb. (20.14 kg) Operating Temperatures -40 to +185°F (-40 to +85°C) Design Loading 50 lb./ft 2 (244 kg/m 2 ) Positive Design Load Certifications SLA-M300|M310 UL 1703 Fire Rating DecoTech ® Frame: UL 2703 Description The sleek, low-profile design of the GAF Energy solar system delivers performance and curb appeal at an affordable price. Product Installation Refer to the Application Instructions for details on how to install the GAF Energy solar system. TECH DATA Design Considerations • GAF Energy solar system must be installed in landscape orientation. • The roof deck must be a minimum of 15/32" thick plywood or 7/16" thick OSB decking. • GAF Energy solar system is intended for use solely on roofs having a slope between 4:12 and 12:12. • DC optimizers or AC inverters can be used. • Asphalt shingle installations only. Solar Energy System
Transcript of Solar Energy System TC DT - Alliance Roofing & Exteriors · install the GAF Energy solar system. TC...
Technical Specifications
* STC: Standard Test Conditions 1000W/m2, 25°C, AM 1.5. For additional parameters and certifications, refer to the latest version of the GAF Energy solar system Application Instructions
Model Number RI 2000
PV Laminate Silfab SLA Mono
Maximum Power under STC* (Pmax)
310 Wp
Open Circuit Voltage under STC (Voc)
40.25 V
Maximum Power Point Voltage under STC (Vmpp)
33.05 V
Short Circuit Current under STC (Isc)
9.93 A
Maximum Power Point Current under STC (Impp)
9.38 A
Module Efficiency under STC (ηm)
19.0%
Temperature Correction Factor TC Voc
-0.30%/C
Cells per module 60
Cell type Monocrystalline
PV Connector Type PV wire with MC4 compatible
PV Laminate Front 3.2 mm high transmittance, tempered, ar coating
PV Laminate Back Multi-layer Polymer Backsheet
Frame Black Powder Coated Aluminum
Weight 44.4 lb. (20.14 kg)
Operating Temperatures
-40 to +185°F (-40 to +85°C)
Design Loading 50 lb./ft2 (244 kg/m2) Positive Design Load
Certifications SLA-M300|M310 UL 1703
Fire Rating DecoTech® Frame: UL 2703
Description
The sleek, low-profile design of the GAF Energy solar system delivers performance and curb appeal at an affordable price.
Product InstallationRefer to the Application Instructions for details on how to install the GAF Energy solar system.
TECH DATA
Design Considerations
• GAF Energy solar system must be installed in landscape orientation.
• The roof deck must be a minimum of 15/32" thick plywood or 7/16" thick OSB decking.
• GAF Energy solar system is intended for use solely on roofs having a slope between 4:12 and 12:12.
• DC optimizers or AC inverters can be used.
• Asphalt shingle installations only.
Solar Energy System
©2019 GAF 1/19 • #837 • SM037 gaf.com/solar • 1-800-ROOF-411
Dimensions
TOP CORNER FLASHING- LEFT
TOP FLASHING 2 X
TOP CORNER FLASHING- RIGHT
INNER TOP FLASHING 2 X
TOP FLASHING SUPPORT 3 X
COUNTER FLASHING- RIGHT
COUNTER FLASHING- LEFT
SOLAR PANEL 2X
66.8" L x 21.5" W
21.5" L x 10" W
22.5" L x 4.0" W
41.8" L x 2.29" W
66.5" L x 1.5" W2.92 "H x 41.7" W x 2.26" H
STARTER STRIP
21.5" L x 10" W
43" L x 67.5" W
66.75" W
Solar Energy System
