Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil...
Transcript of Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil...
![Page 1: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/1.jpg)
Soil Plasticity and the Structured Soil Plasticity and the Structured Cam Clay ModelCam Clay Model
Dr. Martin D. LiuSchool of Civil Engineering
University of New South WalesSydney, NSW 2052, Australia
Tel.: 2-9385-5474Fax: 2-9385-6139
e-mail: [email protected]
![Page 2: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/2.jpg)
Soil Plasticity and the Structured Soil Plasticity and the Structured Cam Clay ModelCam Clay Model
SummaryI: Soil plasticity
II: The Structured Cam Clay model
III: Discussion on further development within the theoretical framework of the SCC model
![Page 3: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/3.jpg)
Brief summary of the SCC modelThe behaviour of soil found in nature differs remarkably from that of the same soil in laboratory reconstituted states.
When solving practical geotechnical engineering problems, the constitutive models developed for describing the behaviour of laboratory reconstituted soil are not good enough.
Influence of soil structure must be considered
![Page 4: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/4.jpg)
Brief summary
A simple predictive model
the Structured Cam Clay (SCC) model
Aim of the model: to provide tool for the solution of boundary value problems encountered in geotechnical engineering.
Simple and convenient for engineers
![Page 5: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/5.jpg)
Brief summaryWe select Modified Cam Clay (MCC) model as the base for the new model.
(1) simple and rational, yet describes the behaviour reconstituted soil with acceptable accuracy;
(2) widely applied in geo-engineering field.
![Page 6: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/6.jpg)
Brief summary
the SCC model, soil response defined in a 4-D space: e, current voids ratio, (p′ , q ), current stress state, stress history, and soil structure.
![Page 7: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/7.jpg)
Brief summarySoil behaviour in the p′- q space divided into two regions by the yield surface.
Elastic & plastic regions
Soil behaves purely elastically for any stress excursion inside the yield surface;
Mean effective stress lnp 'V
oids
ratio
e
Structured soil e = e * + Δ e
Reconstituted soil: e *
e * Δ e
e
p' y,i p'
Virgin yieldingElastic
q
p'
M*
p' s
Yield surface
![Page 8: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/8.jpg)
brief summary
virgin yield occurs for stress state on the surface and causing it expansion.
During virgin yielding, yield surface expands with the current stress stays on the surface.
Mean effective stress lnp 'V
oids
ratio
e
Structured soil e = e * + Δ e
Reconstituted soil: e *
e * Δ e
e
p' y,i p'
Virgin yieldingElastic
q
p'
M*
p' s
Yield surface
![Page 9: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/9.jpg)
Brief summary
The compression behaviour of structured soils is described as
e = e* + Δe
e*: voids ratio for the same soil in a reconstituted state
Δe: additional voids ratio sustained by soil structure
![Page 10: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/10.jpg)
Brief summary
The compression behaviour of structured soils is described asBased on experimental data, Liu and Carter (1999, 2000) proposed the following equation for Δe
cp
pae
biy +⎟⎟
⎠
⎞⎜⎜⎝
⎛′
′=Δ ,
b: destructuring index;
c: the part of Δe that cannot be eliminated by the increase of stress level;
a: Δei = a+c.
![Page 11: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/11.jpg)
Brief summary
Some basic assumptions are:
(1) The mechanical properties of a clay in laboratory reconstituted states are treated as intrinsic, which can be described adequately by the MCC model.
(2) Elastic properties of soil are independent of soil structure.
(3) Both hardening and destructurig of soil are dependent on plastic volumetric deformation.
With the proposed isotropic compression line, the SCC model is formulated.
![Page 12: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/12.jpg)
Brief summaryThe Structured Cam Clay (SCC) model applied to simulate the behaviour of soil for (1) laboratory single element tests and (2) boundary value problems.
(1) Convenient identification of model parameters and for implementation into numerical analysis
(2) Successfully captures many important features of the behaviour of structured soils and influence of soil structure
![Page 13: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/13.jpg)
Brief summary(3) Significantly improves the performance of the Modified Cam Clay Model, represents well the behaviour of real soil, the soil found in nature
(4) Useful tool for the solution of boundary value problems encountered in geotechnical practice
![Page 14: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/14.jpg)
Soil Plasticity and the Structured Soil Plasticity and the Structured Cam Clay ModelCam Clay Model
III: Discussions on further development within the theoretical framework of the SCC model
1: Modeling soil deformation in the general stress and strain state2: Plastic deformation within yield surface3: Effect of cementation4: Development of soil structure5: Post peak strength of soils6: Anisotropy7: Questions and discussions welcome!
![Page 15: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/15.jpg)
1: IntroductionIn the previous talk,
(1)introduce plasticity theory for constitutive modelling of soils; Demonstrate how plastic deformation of soil modelled within the conventional plasticity theory with special consideration characteristics of soil.
A distinguished feature of soils: plastic volumetric deformation dependent hardening.
![Page 16: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/16.jpg)
1: Introduction(2) introduce two elasto-plasticity models:
original Cam Clay model and Structured Cam Clay model.Models within the framework critical state soil mechanicsIn SCC model, (1) differences between actual soil found in nature and that in laboratory reconstituted state illustrated. (2) The behaviour of natural soil modelled by considering the influence of soil structure
![Page 17: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/17.jpg)
1: IntroductionThe SCC model formulated to be simple as a practical tool for geotechnical engineers. Simplifications and idealizations made in accordance with this requirement. Only features of first importance for common engineering problems represented.
Situations where a simple model not enough, refinement of the model or more advance models needed
![Page 18: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/18.jpg)
1: IntroductionSituations for examples
(1) more accurate descriptions and detailed examination of soil behavioure.g., features of second importance cannot be ignored.(2) more complicated material behavioure.g., more complicated stress paths(3) special circumstancese.g., anisotropy significant
![Page 19: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/19.jpg)
1: IntroductionImprovement of the SCC model within the proposed theoretical framework possible
Some of techniques for the improvement discussed, they are1: soil behaviour in the general stress and strain state2: Plastic deformation within yield surface3: Effect of cementation4: Small strain behaviour5: Anisotropy
![Page 20: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/20.jpg)
2: Soil behaviour in the general stress and strain state
Work needed to generalize the current 2-D SCC model, axysymmetical stress and strain circumstances, to the general stress and strain tensor state.
Examining soil behaviour in 2-D model, e.g., yield surface,
( ) 0*22 =′−′′Μ− pppq s
22*2
ηη
εε
−Μ=p
v
pd
dd
![Page 21: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/21.jpg)
2: Soil behaviour in the general stress and strain state
The key part to find stress and strain parameters suitable for representing soil behaviour in the stress and strain tensor space. To substitute p′, q, εv and εd.
The concept of a generalized shear stress ratio proposed as a mapping quantity to representing the mobilization of the friction resistance of soil in the general stress state. Then other stress and strain parameters formed in step with it.
![Page 22: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/22.jpg)
2.1 A generalized shear stress ratio
A generalized shear stress ratio formulated based on a critical state strength criterion in the general stress spaceExperimental data: (1) critical states of deformation exist for a wide range of geomaterials with and without structure;(2) mechanical properties of soils at a critical state of deformation independent of soil structure and testing stress paths
Some experimental data
![Page 23: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/23.jpg)
2.1 A generalized shear stress ratioFailure surface of Fuji sand Detected in the 3-D principleStresses (Yamada, 1979)
π plane is used and defined as
The X & Y coordinates & conventional triaxialtests are shown
σ'1
σ' 2
σ' 1=σ' 2
σ' 2=σ' 3
( ) ( )pyx ′−′=′−′= 132 23,
22 σσσ
x
Y
![Page 24: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/24.jpg)
2.1 A generalized shear stress ratio
Fuji sand π Plane
Failure surface betweenvon Mises failure surface & Matsuoka-Naki surface
σ'1
σ' 2
σ' 1=σ' 2
σ' 2=σ' 3
x
Y
![Page 25: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/25.jpg)
2.1 A generalized shear stress ratio
Grundite clay (Lade et al)Failure surfaces of clay at different stress level
p'=80 kPa
p'=124 kPa
p' =162 kPa
σ ' 2
σ ' 1
σ ' 1=σ '2
![Page 26: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/26.jpg)
2.1 A generalized shear stress ratio
A rock (Mogi, 1971) Failure surface
σ ' 1
σ ' 2
σ ' 1=σ ' 2
![Page 27: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/27.jpg)
2.1 A generalized shear stress ratioStrength criteria of geo-materials at critical state
(1)The criterion can be expressed in terms of the three stress invariants.
Intrinsic material property, dependent of mineralogy of the material
(2) Critical state surface in principal stress space is a linear cone, with the apex of the cone being at the origin of stress space if the material is cohesionless.The relative value of the stress no influence the shape of the surface
![Page 28: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/28.jpg)
2.1 A generalized shear stress ratioStrength criteria of geo-materials at critical
state in the general stress space determined by
Its shape in the π planeShape critical state Strength surface in the π
plane varies between von Mises criterion and Matsuoka-Nakai criterion.
![Page 29: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/29.jpg)
2.1 A generalized shear stress ratio
Liu and Carter (2003) proposed a general critical state Strength, allowing the shapes of the surfaces variable with materials
( ) ( ) ( )[ ]s
sf 927
321
23
22
21
2321321
2 +−′′′
′+′+′−′+′+′′+′+′=
σσσσσσσσσσσσ
![Page 30: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/30.jpg)
Liu and Carter criterion
Mohr-Coulomb's criterionMatsuoka-Nakai's criterion (s=1)Lade's criterion (s=0)A strength locus (s=-10)Von Mises's criterion
σ ' 2σ ' 3
Fig. 1 Critical state strength surfaces in the π plane (φ cs=32o, p' =100 kPa)
( ) ( ) ( )[ ]s
sf 927
321
23
22
21
2321321
2 +−′′′
′+′+′−′+′+′′+′+′=
σσσσσσσσσσσσ
![Page 31: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/31.jpg)
2.1 A generalized shear stress ratioA generalized shear stress ratio formulated
[ ])1527(1527
)1527(2^
222
222
sffsf
sfff
−++−+
−++=η
σ ' 1
σ ' 3 σ ' 2
σ' 2=(σ' 1+σ' 3)/2η^=2(σ' 1-σ' 3)/(σ' 1+σ' 3)A
For the stress on the surface with
31
31 )(2^σσσση′+′′−′
=
2)( 31
2σσσ
′+′=′
![Page 32: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/32.jpg)
2.2 Stress parameters for general tensor stress stateBased on formulated generalized shear stress ratioStress parameters for constitutive modeling for generalstress and strain tensor proposed
The generalized stress ratio is suitable for general tensor stress states.
( )′= ′ ′ ′+ +p 13 11 22 33σ σ σ
^^ ηpq ′=
![Page 33: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/33.jpg)
2-D models can be extended for general stress states,for example,Yield surface
Rewritten as
( ) 0*22 =′−′′Μ− pppq s
( ) 0*^ 22 =′−′′Μ− pppq o
2.3 Generalization of yield surface
![Page 34: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/34.jpg)
Yield surface
The yield surface in the Principal stress space
( ) 0*^ 22 =′−′′Μ− pppq o σ' 1 = σ' 2 = σ' 3
σ' 1
σ' 2
(c) Principal stress space
σ' 3
2.3 Generalization of yield surface
![Page 35: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/35.jpg)
Yield surface
The yield surface in the π plane
( ) 0*^ 22 =′−′′Μ− pppq o
σ'2σ'3
σ'1
(d) The π plane
Liu-Carter's criterions=1 (Matsuoka-Nakai)s=0 (Lade criterion)s=-10
Matsuoka-Nakai's criterion (s=1)Mohr-Coulomb's criterion
Von Mises's criterion
2.3 Generalization of yield surface
![Page 36: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/36.jpg)
2.4 Generalization of flow ruleDilatancy for 2-D
Generalized dilatancy: by substituting the shear stress ratio
s
epv
pd
ppd
d
′′−+−Μ
=
1*
2
222 ϖηη
ηεε
s
epv
pd
ppd
d
′′−+−Μ
=1^^*
^2222 ϖηη
ηεε
![Page 37: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/37.jpg)
2.4 Generalization of flow rule
Generalized dilatany:
Distortional strain increment obtained, not the increment plastic strain tensor.AssumptionThe deviatoric plastic strain increment tensor for
loading is assumed to be linearly proportional to the current deviatoric stress tensor
s
epv
pd
ppd
d
′′−+−Μ
=1^^*
^2222 ϖηη
ηεε
![Page 38: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/38.jpg)
2.4 Generalization of flow ruleMathematically
The incremental plastic strain can be written as)''()( pdd p
vp −Λ=− σεε
( )( ) ( )pp
dpddpdp
vp
′−′•′−′′−′
+=σσ
σI2
63
εεε
Unit tensor, stress tensor, inner product of two tensors
The plastic deformation is defined.
![Page 39: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/39.jpg)
3: Effect of cementation
Dr. Suksun Horpibulsuk has carried frontier research on the behaviour of cemented soil. I believe that he is more qualified than I to talk to you about the influence of cementation on the behaviour of soils and how to model these influence mathematically. I will not omit this topic here.
![Page 40: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/40.jpg)
4: A conceptual framework for modelling the mechanical behaviour of structured soils
Soil behaviour very complicated and loading circumstances soil is subjected in geotechnicalengineering vary greatly. The mechanisms for deformation and failure for geo-structures oftencontrolled by different characteristics of soil behaviour. Comprehensive review of soil Behaviour necessary.
![Page 41: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/41.jpg)
•• Some well known characteristics of soil Some well known characteristics of soil behaviourbehaviour
•• Quantification of the behaviourQuantification of the behaviour•• A conceptual framework for modellingA conceptual framework for modelling
4: A conceptual framework for modelling the mechanical behaviour of structured soils
This section covers:
![Page 42: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/42.jpg)
4: Conceptual Framework4: Conceptual Framework
•• Useful:Useful:–– guidance for mathematical modellingguidance for mathematical modelling–– understand which characteristics of soil understand which characteristics of soil
behaviour which are most significantbehaviour which are most significant
4.1: Stable region4.1: Stable region
![Page 43: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/43.jpg)
0
200
400
600
0 0.001 0.002 0.003Volumetric strain ε v
Mea
n ef
fect
ive
stre
ss
kPa
1 2 4 11 24 103 151
Cyclic isotropic loading of soil (El-Sohby, 1964)
No. cycles
Experimental dataExperimental dataCyclic isotropic tests (ElCyclic isotropic tests (El--Sohby, 1964)Sohby, 1964)
![Page 44: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/44.jpg)
0
200
400
600
0 0.001 0.002 0.003Volumetric strain ε v
Mea
n ef
fect
ive
stre
ss
kPa
1 2 4 11 24 103 151
Cyclic isotropic loading(El(El--Sohby, 1964)Sohby, 1964)
No. cycles
Cyclic isotropic testsCyclic isotropic testsSoil behaviour during
cyclic loading
(1)Virgin yielding for 1st
cycle;
(2) stable after six cycles;deformation dependent on type of loading and the stress state, independent of N.
(3) Transition from virgin yielding to stable behaviour for N = 2 ~5.
![Page 45: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/45.jpg)
Cyclic tests on soilsCyclic tests on soils
Similar trends observed
(a) for cyclic tests with η=constant;
(b) for cyclic shearing tests if η < ηs.
ηs, a given shear stress ratio.
A new region of soil deformation suggested:
The stable region, usually covering the elastic region.
![Page 46: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/46.jpg)
The stable region
In the region, soil deformation, independent of the number of cycles. No further accumulation in permanent deformation.
Deformation not elastic, hysteresis seen.
The region greater than elastic region.
Important for designs such as pavements, offshore foundations.
N for traffic infinitive
![Page 47: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/47.jpg)
4.2: Subyielding inside the yield surface 4.2: Subyielding inside the yield surface and associated destructuringand associated destructuringPure elastic deformation within the yield surface Pure elastic deformation within the yield surface assumption.assumption.
Seen from the original
data, material idealization
made.
Unloading & reloading not the
same, not completely
recoverable
not “exact” elastic =
actual plastic
1.9
2.1
2.3
2.5
10 100 1000Mean effective stress p' (kPa
Void
s ra
tio e
)
A
BC
DE
![Page 48: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/48.jpg)
4.2: Subyielding inside the yield surface 4.2: Subyielding inside the yield surface and associated destructuringand associated destructuring
Plastic deformation occurs
for loading inside yield
surface.
Concept of subyielding
introduced.
Destructuring, associated
with plastic deformation,
occurs in subyielding.
![Page 49: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/49.jpg)
4.2: Subyielding inside the yield surface 4.2: Subyielding inside the yield surface and associated destructuringand associated destructuring
importance
(a) Loading with large stress reversals
For loading, virgin yielding
Unloading, at start, elastic
As reversal , plastic occurs.
At large reversal, plastic defm.
is much greater than virgin yielding.
1.63
1.68
1.73
1.78
1.83
10 100 1000
Mean effective stress p ' (kPa)sp
ecifi
c vo
lum
e (1
+e)
Unloading Initial stress
Loading
The behaviour of Beaucaire clay under isotropic loading and unloading tests (Costanzo et al, 2006)
![Page 50: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/50.jpg)
4.2: Subyielding inside the yield surface 4.2: Subyielding inside the yield surface and associated destructuringand associated destructuring
(b) Liquefaction,
The feature of plastic deform.
similar to the isotropic unloading. Huge plastic deformation occurs as the stress goes to zero.
If subyielding not considered, no liquefaction
1.63
1.68
1.73
1.78
1.83
10 100 1000
Mean effective stress p ' (kPa)sp
ecifi
c vo
lum
e (1
+e)
Unloading Initial
stress Loading
![Page 51: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/51.jpg)
4.2: Subyielding inside the yield surface 4.2: Subyielding inside the yield surface and associated destructuringand associated destructuring
(c) Structure performance under cyclic loading
excavation, earthquake, wave, traffic loading
(d) For particularly structures, allowed deformation or non-uniform deformation small, accurate prediction of soil deformation needed.
An important one, non-uniform settlement of building caused by tunnelling in metropolitan cities.
![Page 52: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/52.jpg)
4.3: Development of soil structure with 4.3: Development of soil structure with timetime
Soil forms and develops structure with time.
Usually positive effect.
The peak strength increases;
The stiffness increases.
2
2.15
2.3
100 1000
Mean effective stress p' (kPa)
Void
s ra
tio e structured
reconstitute
12
3
Example: an enlargement of the yield stress after a few months
![Page 53: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/53.jpg)
4.3: Development of soil structure with 4.3: Development of soil structure with timetime
Drained sheared test on a sand
The stiffness increases significantly
![Page 54: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/54.jpg)
4.4: Different soil structures due to the 4.4: Different soil structures due to the soil formation processessoil formation processes
Undrained test
Vaid et al (1995)
The same a sand with
different methods of
sample preparation
Basically the same voids ratio
![Page 55: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/55.jpg)
4.4: Different soil structures due to the 4.4: Different soil structures due to the soil formation processessoil formation processes
Ishihara (1993) Toyoura sand: moisture placement
![Page 56: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/56.jpg)
4.4: Different soil structures due to the 4.4: Different soil structures due to the soil formation processessoil formation processes
Ishihara (1993) Toyoura sand: dry deposition placement
![Page 57: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/57.jpg)
4.5: Post peak strength of soils4.5: Post peak strength of soils
Three strengths for soils
(a) peak strength
(b) critical state strength
(c) residual strength
The shear strength of a soil that can be mobilised on a polished sliding surface, after it has been formed through the soil due to the alignment of its platy particles.
![Page 58: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/58.jpg)
4.5: Post peak strength of soils4.5: Post peak strength of soils
For residual strength
(1) enough platy particle to form polished failure surface
(2) large deformation to form polished surface
Critical state strength for most clay: 20°
Residual strength: as low as 6°
Landslides can be controlled by residual strength, especial slide along pre-existing failure surface
![Page 59: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/59.jpg)
41016222834
0 20 40 60 80 100
Clay fraction (%)Fr
ictio
n an
gle
(o )
residual statecritical state
Critical state strength and residual strength dependent on clay faction ωc
Influence in three regions(1) ωc < 20%, no influenceCS Strength = R strengthconstant
(2) ωc > 50%, no influenceCS Strength > R strengthboth constant
(2) 20%< ωc < 50%, no influenceCS Strength > R strengthboth decreases with ωc
![Page 60: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/60.jpg)
4.6 Influence of soil anisotropyThe greatest challenges to academia and engineering in engineering
Some influences demonstrated and discussed
Isotropy and anisotropy
A material is defined as isotropy if it possesses no preferred direction; and the orientation in space of a sphere of an isotropic material can not be detected experimentally.
Otherwise, the material is anisotropy
![Page 61: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/61.jpg)
AnisotropyIsotropy and anisotropy
A material is defined as isotropy if it possesses no preferred direction; and the orientation in space of a sphere of an isotropic material can not be detected experimentally. Otherwise, the material is anisotropy
σ′
τ
![Page 62: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/62.jpg)
AnisotropyCross anisotropy
Formulation and propertyMost geo-materials found in site cross anisotropicarising from the depositional history of natural soil
σ′
σ′
![Page 63: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/63.jpg)
Anisotropy: test dataIsotropic compression tests on sandσ′1= σ′2= σ′3=p′
ε1=ε2=ε3εv/ εa=3
Virgin compressionn=37.5%≈ isotropy
Anisotropy increases with n.
![Page 64: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/64.jpg)
Anisotropy: test dataIsotropic compression testsσ′1= σ′2= σ′3=p′εv/ εa=3UnloadingThe sameεv/ εa=3Elastic & isotropic for this sand
![Page 65: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/65.jpg)
Anisotropy: test data
Undrained effective stress paths
![Page 66: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/66.jpg)
Anisotropy: test data
Undrained effective stress pathsIndicating rotation of
the yield surface
![Page 67: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/67.jpg)
Anisotropy: test data
Yield surface identified for some Yield surface identified for some natural clays: rotated toward ko linenatural clays: rotated toward ko line
![Page 68: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/68.jpg)
Anisotropy: test data
Anisotropy linked to effect of Anisotropy linked to effect of the principal stress rotationthe principal stress rotation
The same as cutting samples The same as cutting samples from different directions & from different directions & testing them in the same waytesting them in the same way
If soil isotropic, response the If soil isotropic, response the same;same;If soil anisotropic, response If soil anisotropic, response dependent on angle dependent on angle θθ
ground
σ′1 σ′1
σ′1
rotation angle θ=0° 45° 90°
![Page 69: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/69.jpg)
Rotation of the principal stresses
Hollow cylinder Hollow cylinder test test Toyoura sand Toyoura sand different directions different directions of the principal of the principal stresses stresses
Behaviour of soil Behaviour of soil dependent on dependent on angle angle θθ: direction : direction of principal stressof principal stress
anisotropicanisotropic
![Page 70: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/70.jpg)
Anisotropy: test data
Peak strength Peak strength direction of the direction of the principal stressesprincipal stresses
For most sand, For most sand, minimum peak minimum peak strength at strength at θθ=20=20°°~30~30°°
![Page 71: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/71.jpg)
Anisotropy: test data
Effect of rotation of Effect of rotation of principal stressesprincipal stresses
In tests, In tests, σ′σ′1111, , ττ1212, , σ′σ′2222, , ττ2121 vary in such as vary in such as way that magnitudes way that magnitudes of the two principal of the two principal stresses stresses σ′σ′11 and and σ′σ′22do not change but do not change but the directions of the directions of σ′σ′11and and σ′σ′22 changes changes continuously from 0continuously from 0°°to 360to 360°° to 720to 720°°, and , and on.on.
σ′2 2 τ12
σ′11 τ2 1
![Page 72: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/72.jpg)
Effect of rotation of principal stressesEffect of rotation of principal stresses
E2=E2=εε1111--εε2222
E4=E4=εε1212In rotation of In rotation of the principal the principal stresses:stresses:(1) plastic (1) plastic deformationdeformation(2) permanent (2) permanent strain increasesstrain increases
![Page 73: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/73.jpg)
Conceptual FrameworkConceptual Framework
•• Four regions of Four regions of different behaviourdifferent behaviour–– Elastic regionElastic region–– Virgin yieldingVirgin yielding–– SubSub--yieldingyielding–– ““StableStable”” behaviourbehaviour p'
q Yield surface
Pure elastic
Current stress
Sub-yielding
![Page 74: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/74.jpg)
5 Surfaces in Stress Space5 Surfaces in Stress Space
•• Structural yield Structural yield surfacesurface
•• Equivalent yield Equivalent yield surfacesurface
•• Loading surfaceLoading surface•• Elastic surfaceElastic surface•• Stable surfaceStable surface
p'
q
Mf
Structural yield surface
A
Loading surf.
Stable surface
Elastic surf.
Equivalent yield surface
![Page 75: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/75.jpg)
Behaviour ConditionElastic Stress state inside the elastic
surface, p′e
Types of BehaviourTypes of Behaviour
![Page 76: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/76.jpg)
Elastic ResponseElastic Response
p'
q
Mf
Structural yield surface
A
Loading surf.
Stable surface
Elastic surf.
Equivalent yield surface
![Page 77: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/77.jpg)
Behaviour ConditionElastic Stress state inside the elastic
surface, p′eVirgin yielding p′c = p′s and dp′c > 0
Types of BehaviourTypes of Behaviour
![Page 78: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/78.jpg)
Virgin YieldingVirgin Yielding
p'
q
Mf
Structural yield surface
A
Loading surf.
Stable surface
Elastic surf.
Equivalent yield surface
![Page 79: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/79.jpg)
Behaviour ConditionElastic Stress state inside the elastic
surface, p′eVirgin yielding p′c = p′s and dp′c > 0Subyielding Stress state inside p′s and out side
p′e and p′n
Types of BehaviourTypes of Behaviour
![Page 80: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/80.jpg)
p'
q
Mf
Structural yield surface
A
Loading surf.
Stable surface
Elastic surf.
Equivalent yield surface
SubSub--YieldingYielding
![Page 81: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/81.jpg)
Behaviour ConditionElastic Stress state inside the elastic
surface, p′eVirgin yielding p′c = p′s and dp′c > 0Subyielding Stress state inside p′s and out side
p′e and p′nSubyielding Stress state inside p′n and out side
p′e during the first few cycles
Types of BehaviourTypes of Behaviour
![Page 82: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/82.jpg)
SubSub--Yielding (1st few cycles)Yielding (1st few cycles)
p'
q
Mf
Structural yield surface
Loading surf.
Stable surface
Elastic surf.
Equivalent yield surface
A
![Page 83: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/83.jpg)
Behaviour ConditionElastic Stress state inside the elastic
surface, p′eVirgin yielding p′c = p′s and dp′c > 0Subyielding Stress state inside p′s and out side
p′e and p′nSubyielding Stress state inside p′n and out side
p′e during the first few cyclesStable Stress state inside p′n and out side
p′e (after about 5 cycles)
Types of BehaviourTypes of Behaviour
![Page 84: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/84.jpg)
Stable Response (cycling)Stable Response (cycling)
p'
q
Mf
Structural yield surface
A
Loading surf.
Stable surface
Elastic surf.
Equivalent yield surface
![Page 85: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/85.jpg)
Loading Type ConditionFirst loading p′c = p′cmax and dp′c > 0
p′cmax is the maximum loading surface the soil has ever experienced.
Types of BehaviourTypes of Behaviour
![Page 86: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/86.jpg)
Loading Type ConditionFirst loading p′c = p′cmax and dp′c > 0Reloading p′c < p′cmax and dp′c > 0
p′cmax is the maximum loading surface the soil has ever experienced.
Types of BehaviourTypes of Behaviour
![Page 87: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/87.jpg)
Loading Type ConditionFirst loading p′c = p′cmax and dp′c > 0Reloading p′c < p′cmax and dp′c > 0Unloading p′c < p′cmax and dp′c < 0
p′cmax is the maximum loading surface the soil has ever experienced.
Types of BehaviourTypes of Behaviour
![Page 88: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/88.jpg)
Hardening & DestructuringHardening & Destructuring
•• Assumed to depend on the plastic Assumed to depend on the plastic volumetric deformationvolumetric deformation
![Page 89: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/89.jpg)
ConsequencesConsequences
•• Magnitude of plastic volumetric Magnitude of plastic volumetric deformation of natural soil is dependent deformation of natural soil is dependent on change in size of yield surface, on change in size of yield surface, irrespective of stress pathirrespective of stress path
•• Structural yield surface is dependent on Structural yield surface is dependent on current soil structure, current voids current soil structure, current voids ratio, and current stress stateratio, and current stress state
![Page 90: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/90.jpg)
Changes in StructureChanges in Structure
•• DestructuringDestructuring–– caused by stress changescaused by stress changes–– monotonic and irrecoverablemonotonic and irrecoverable
•• Development of structureDevelopment of structure–– all other effects such as ageing, all other effects such as ageing,
leaching, change of chemical leaching, change of chemical components of the pore fluid, and components of the pore fluid, and weatheringweathering
![Page 91: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/91.jpg)
D
p' c
e
AB
C
F
(a) Behaviour of structured soil in e -p' c
space
p' o,B p' y,i p' o,F
E
(b) Variation of surfaces during loading
F
p' c,
C
p'
q
AB
CD
Ep' y,i
p' c,F
M f
p' c,B
DestructuringDestructuring
SubSub--yielding: AByielding: AB
![Page 92: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/92.jpg)
D
p' c
e
AB
C
F
(a) Behaviour of structured soil in e -p' c
space
p' o,B p' y,i p' o,F
E
(b) Variation of surfaces during loading
F
p' c,
C
p'
q
AB
CD
Ep' y,i
p' c,F
M f
p' c,B
DestructuringDestructuring
SubSub--yielding: AByielding: ABVirgin yielding: BCVirgin yielding: BC
![Page 93: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/93.jpg)
D
p' c
e
AB
C
F
(a) Behaviour of structured soil in e -p' c
space
p' o,B p' y,i p' o,F
E
(b) Variation of surfaces during loading
F
p' c,
C
p'
q
AB
CD
Ep' y,i
p' c,F
M f
p' c,B
DestructuringDestructuring
SubSub--yielding: AByielding: ABVirgin yielding: BCVirgin yielding: BCUnload. & reload.: CDEUnload. & reload.: CDE
![Page 94: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/94.jpg)
• Many factors affect development of structure: e.g., ageing effect on the size of the structural yield surface (Mesri and Shahien, 1997)
p′o size of equivalent yield surfacetp time needed for primary compressiont time measured from end of primary
compressionβ material constant.
β
⎟⎟⎠
⎞⎜⎜⎝
⎛′=′
poiy t
tpp ,
Development of StructureDevelopment of Structure
![Page 95: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/95.jpg)
• Final state under shearing is eitherthe critical state of deformation orthe residual state of deformation
• Clay fraction < 20%critical state strength
• Clay fraction > 20%continuous strength reduction after critical state requires description
Soil StrengthSoil Strength
![Page 96: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/96.jpg)
• Strength after the critical state depends on particle orientation
Μf maximum shearing resistanceΜ*cs critical state strengthΜ*r residual strengthωo degree of particle orientation
(linked with the plastic work of shear deformation along potential sliding surface)
Strength ReductionStrength Reduction
Mf=M*cs-(M*cs-M*r)ωo
![Page 97: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/97.jpg)
7 Major points
1. Equivalent yield surface, structural yield surface and the loading surface
2. Elastic surface3. Stable surface
SummarySummary
![Page 98: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/98.jpg)
1. Equivalent yield surface, structural yield surface and the loading surface
2. Elastic surface3. Stable surface4. Flow rule5. Hardening and destructuring6. Stable deformation7. Transition to the residual state of
deformation
SummarySummary
![Page 99: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/99.jpg)
• Conceptual framework - describing mechanical behaviour of structured soils
• Stress-strain behaviour divided into four regions in stress space, i.e., – an elastic region, a stable deformation
region, a sub-yielding region and a virgin yielding region
• Influence of structure on mechanical behaviour discussed
ConclusionsConclusions
![Page 100: Soil Plasticity and the Structured Cam Clay Modelctru.sut.ac.th/Download/Suranaree3.pdfSoil Plasticity and the Structured Cam Clay Model Summary I: Soil plasticity II: The Structured](https://reader033.fdocuments.us/reader033/viewer/2022042620/5aa8a5d67f8b9a86188bc567/html5/thumbnails/100.jpg)
Thank you very much!