7/25/2019 SOFTWARE UPDATE OR CAMPAIGN GREEN FLOW.PDF

1/1

ST

ART Technician has

SAIL, Conversion

& Operational

Analysis access

Window's Updates

are installed and

up-to-date on PC

or Laptop

SDP3 Service

Certificate installed

and up-to-date on

PC or Laptop

SDP3 Latest

version is installed

as per SAIL

PC or Laptop is

connected to the

Scania Secured

network(not Wi-Fi Spark)

PC or Laptop is

plugged into the

mains and/or fully

charged

Speak to your

General Manager

to apply to I.T. for

the correct

permissions

Install SDP3

Service certificate

at SAIL/TIL/SDP3

Download the

latest version from

SAIL/TIL/SDP3

and install onto PC

or Laptop

Vehicle Batteries

are fully Charged

(check on SDP3

that batteries are

status GREEN)

Vehicle Air

Pressure is fully

Charged

FIN

ISH

Road-test the

vehicle and re-

check for any

generated faultcodes

Turn off Ignition for

30 Seconds, then

clear any

generated faultcodes

Open ECU

Updates in SDP3,

and perform any

outstandingSoftware updates

Check if EMS ecu

has been

manipulated or

"chipped" usingSDP3

Check Vehicle has

NOActive fault

codes beforeproceeding

Take an "SVI" file

from the vehicle

and upload into

OperationalAnalysis

Turn off Ignition for

30 secs, re-start

SDP3 and re-try

the Software

Update

Take Screen

dump, SVI & Log

Files, Submit a

FRAS HD

Question

Inform your

General Manager

Inform the

Customer and

Repairany Active

faults before

proceeding

Vehicle & Engines - Software Campaign/Update

TECHNICIAN CHECK-LIST GREEN FLOW

Please refer to T.M.I00:13 06 24 version3for detailed instructions