Software Information Sheet

Software Information Sheet

JCM American Corporation TEL +1-702-651-0000

JCM Europe GmbH TEL +49-211-530645-0

JCM Gold (H.K.) Ltd. TEL +852-2429-7187

J-Cash Machine (Thailand) Co., Ltd TEL +66-2363-7509 Japan Cash Machine Co., Ltd. (Headquarters – Japan) TEL +81-6-6703-8405

© JCM

Japan Cash Machine Co., Ltd. In charge

File:

iVIZION-100_SS-SU_28644_ID003_AUS.doc Page:

1/8

General Information Model Name: iVIZION-100-SS/SU SW.Req. No. C20-0288-01 A2020-0288-01

File Name: iVIZION-100_SS-SU_28644_ID003_AUS.BIN Date: (mm,dd,yyyy) 09.17.2020 Rev: C1

SW Version: iVIZION-100(AUS)-SS/SU ID-003 Guide: None

SW. Version: 2.86-44 Check Sum: 909C

Country (Code): Australia (AUS) CRC (seed= 0000): DC92

Currency: Dollar CRC (seed= 1234): D36F

Direction: 4 Way CRC32 (seed= 0000): 756ED16D

Note: -

Denomination:

Years & MRI ID No.

94th Edition

Denom. Printed Issued MRI# Denom. Printed Issued MRI#

5 ’03- ’95 AUD5.4 20 - ’19 AUD20.4

5 ’01 ’01 AUD5.5 50 ’95-‘01 ’95 AUD50.2A

5 ’15 - AUD5.6 50 ’02- ’95 AUD50.2B

10 ’95-’01 ’93 AUD10.4A 50 - ’18 AUD50.3

10 ’02- ’93 AUD10.4B 100 ’96-’99 ’96 AUD100.2A

10 - ‘17 AUD10.5 100 ’08- ’96 AUD100.2B

20 ’94-‘01 ’94 AUD20.3A 100 - - AUD100.3

20 ’02- ’94 AUD20.3B - - - -

ACCLOAD Program: ACCLOAD3.

Barcode Ticket: Accepts JCM specified 1D and 2D barcode tickets.

ICB: ICB is supported in this firmware. ICB feature is enabled or disabled with ICB Enable / Disable setting

barcode ticket, Utility Function of JCM Suite or with ICB Enable / Disable Command of ID-003.

JCM Tool Suite: JCM Tool Suite Version 1.42 Update Pack: None

JCM Downloader for Suite Edition Version 1.10.0.0

ACCLOAD3 for Suite Edition Version 3.20.0.0

iVIZION Calibration Tool for Suite Edition Version 1.65.0.0

iVIZION Performance Tool for Suite Edition Version 1.35.0.0

iVIZION Utility Tool for Suite Edition Version 1.6.2.0

Modifications: (Version 2.85-44 → 2.86-44) 09/2020

• Banknote Recognition: Improved acceptance: AUD100.3 notes.

• Banknote Recognition: Improved 18-digit barcode feature.

(Version 2.84-44 → 2.85-44) 07/2020

• Banknote Recognition: Improved acceptance: All denominations.

• Machine Operation: Added recognition: AUD100.3 notes.

(Version 2.83-44 → 2.84-44) 07/2019

• Banknote Recognition: Improved acceptance and security: All denominations.

• Machine Operation: Modified the bill validator to not enable if the asset number is set to all

spaces, all zeros, or all ones.

(Version 2.82-42 → 2.83-44) 01/2019

• Banknote Recognition: Added recognition: AUD20.4 (‘18) note.

• Banknote Recognition: Improved acceptance: AUD50.3 (‘18) note.

• Machine Operation: Improved ICB Clear function.

(Version 2.80-42 → 2.82-43) 02/2018

• Banknote Recognition: Added recognition: AUD50.3 (‘18) note.

• Banknote Recognition: Improved acceptance: AUD100.2 note.

• Banknote Recognition: Improved security: AUD50.2 note.

• Machine Operation: Improved transport process for polymer notes.

(Version 2.72-40 → 2.80-42) 08/2017

© JCM


File:


2/8

• Machine Operation: Modified validator to initialize after clearing jam in acceptor.

• Machine Operation: Modified technician/tamper countermeasures to cause a stacker jam when

note cannot be found during power recovery.

(Version 2.59-39 → 2.72-40) 05/2017

• Banknote Recognition: Added recognition: AUD 10.5 note.


• Machine Operation: Improved ticket acceptance.

• Machine Operation: Improved Feed-In process.

• Machine Operation: Supports Blue Wave DX.

• Machine Operation: Improved cashbox detection when in direct sunlight.

• Machine Operation: Added ICB Box Type information.

• Interface: Added multi-barcode ticket acceptance.

(Version 2.57-39 → 2.59-39) 04/2016

• Machine Operation: Improved transport process for polymer notes.

(Version 2.54-38 → 2.57-39) Not Released

• Banknote Recognition: Added recognition: AUD 5(’15) note.

• Banknote Recognition: Added photocopy countermeasures: AUD 5(’15) note.

• Banknote Recognition: Added double-detection countermeasures: AUD 5(’15) note.

• Machine Operation: Improved transport process for Polymer notes.

• Interface: Added the ability to enable 4-way ticket acceptance.

(Version 2.53-38 → 2.54-38) 09/2015


(Version 2.37-37 → 2.53-38) 08/2015

• Machine Operation: Reduced gross pause timer to 10 seconds.

• Machine Operation: Improved cash box removed detection.

• Machine Operation: Improved Ticket identification process.

• Machine Operation: Improved operations for monitoring continuous insertion of polymer notes.

• Machine Operation: Support Multi Barcode Tickets.

• Interface: Modified Authentication code function.


• Machine Operation: Improved pull-back protection.

• Machine Operation: Improved Ticket identification process.

• Machine Operation: Improved the acceptance of Tickets with the wide print width.

• Machine Operation: Modified the Pause process to prevent reject during quick insertion.

• Interface: Modified validator to retain setting commands during initialization.

• Interface: Modified Authentication code function.

• Interface: Modified validator to retain Reject Status for at least 30 seconds until receiving Status

Request.

(Version 2.05-29 → 2.21-34) 08/2014

• Machine Operation: Improved transport control toward cashbox.

• Machine Operation: Improved Head JAM auto recovery in reset.

• Machine Operation: Modified barcode ticket reading to prevent acceptance of jackpot tickets.

• Machine Operation: Modified iVIZION behavior to ensure the unit will auto initialize when a

head jam is cleared.

• Machine Operation: Modified ICB Asset Mode to no longer accept notes.

• Interface: Stacker status will be reported when stacker is full.

• Interface: Improved bill acceptance in test mode.

• Interface: Modified the reset command during power recovery with a bill in stacker to no longer

send failure AF.

• Interface: Added Authentication code function.

• Interface: Modified status to report rejected due to the INHIBIT command being sent during bill

© JCM


File:


3/8

insertion.

(Version 1.84-23 → 2.05-29) 11/2013

• Machine Operation: Improved Stacker Home, Near-Full and Feed-out adjustment values.

• Machine Operation: Improved Feed-out sensor adjustment process to compensate for dirty/dusty

lens.

• Machine Operation: Improved notification “Failure” to “Stacker Jam” for certain power recovery

events.

• Machine Operation: Rear USB line now supports Tool Suite commands in Test Mode.

• Machine Operation: Modified stacker mech/power hit status message.

• Machine Operation: Modified occasional case where iVIZION would report idle but would not

draw a note into the path.

• Machine Operation: Improved detach processing of Head unit.

• Machine Operation: Modified stacker home sensor margins to account for dust.

• Machine Operation: Modified stacker error recovery. Move note from cashbox to exit sensor if a

jam/abnormality occurs.

• Machine Operation: Added debounce feature to error reporting.

• Interface: Following Reset command, iVIZION status will change to “Initializing” more quickly.

• Interface: Assigned a calculated value in 3Byte of the Secret number (8Fh).

• Interface: Support Download in ID-003 when PowerUp Status.

• Interface: Added the Baud rate Change Command.

(Version 1.84-20 → 1.84-23) 09/2012

• Machine Operation: Revised to not send Vend Valid until stacking has completed.

• Machine Operation: Improved communication recovery following tamper detection.


• Machine Operation: Added JCM Service Software Suite Command.

• Machine Operation: Modified false jam condition.

• Machine Operation: Improved ICB data by adding ticket information, validator model, serial

number and revision.

• Machine Operation: Improved the jam clearing routine.

• Machine Operation: Adjusted distance note is transported into the cashbox.

• Machine Operation: Added stacker mech/power hit tamper countermeasures.

• Machine Operation: Added new Ticket identification process.

• Interface: Added the waiting transmit process of IDLE and STACKED status. (MAX1.0s)

(Version 1.70-15 → 1.70-18) 06/2012

• Interface: Added the Bookmark command.

• Interface: Added serial read command (91).

(Version 1.65-14 → 1.70-15) 04/2012

• Machine Operation: Modified CIS calibration.

• Interface: When iVIZION does not have a cashbox and receives reset command from the host, it

will send an error instead of initializing.

(Version 1.65-13 → 1.65-14) 03/2012

• Interface: Modified the process of receiving command.

(Version 1.64-12 → 1.65-13) 12/2011

• Interface: Modified the multi-command process.

(Version 1.50-06 → 1.64-12) 10/2011

• Machine Operation: Improved a problem of Stacker error in transport from Escrow position.

• Machine Operation: Added the log monitor for Stacker error and Skew.

• Machine Operation: Modified the power recovery operation when the plastic banknote kept the

escrow position.

• Machine Operation: Modified Test mode transition error.

© JCM


File:


4/8

• Machine Operation: Modified double count (Skew error and others) issue in ACCLOAD.

• Machine Operation: Modified banknote transport distance.

• Machine Operation: Modified Feed-In sensor detection process.

• Machine Operation: Improved threshold value of CIS sensor.

• Machine Operation: Added CIS JAM information in ACCLOAD (Error 17).

• Machine Operation: Modified the power recovery operation for polymer note.

• Interface: Added the change to DISABLE STATUS when inhibit command with missing data

byte received.

• Interface: Added the send Reject Status (75) after initiation when take-off transacting note in power

off.

• Interface: Corrected a problem of Program signature request in stacked status position.

• Interface: Corrected a problem of Boot Version and reset request in ROM error status.

• Interface: Improved REJECT signalization timing.

• Interface: Corrected a problem of changed CRC value in “Version Response” after host sets

“Program Signature” seed value.

• Interface: Improved polling command process.

• Interface: Modified Reset command operation.

• Interface: Corrected the status change problem after received the RESET Command.

(Version 1.46-04 → 1.50-06) 03/2011

• Machine Operation: Supports the Sentry2 specifications.

• Machine Operation: Added the Utility function for New Jersey.

• Machine Operation: Modified the cheating detection operation.

• Machine Operation: Modified so that the ICB reading operation is performed on a 2-block basis,

instead of 16-block.

• Machine Operation: Changed the ICB data from the “Little endian” to “Big endian”.

• Machine Operation: Modified not to report the Checksum Error while the ICB system is disabled.

• Interface: Modified the anti-manipulation measures.

(Version 1.45-03 → 1.46-04) 12/2010

• Banknote Recognition: Improved recognition: AUD 5.4, 5.5 and 20.3B notes.

• Interface: Modified Program signature problems with the ABN status and initialize operation.

(Version 1.43-03 → 1.45-03) 11/2010

• Machine Operation: Modified the power recovery operation when the plastic banknote kept the

escrow position.

(Version 1.41-02 → 1.43-03) 10/2010

• Banknote Recognition: Improved recognition: AUD 5.4, 5.5, 10.4A, 20.3A, 20.3B, 50.2A, 50.2B,

100.2A and 100.2B notes.

• Machine Operation: Modified the pause function when banknotes insert to validator continually.

• Machine Operation: Modified the cheat detection processing when the validator is detecting notes

from the cashbox with the power-recovery operation.

• Machine Operation: Improved ICB registration error problems with the power-recovery operation.

• Interface: Modified communication error process on interrupt mode.

(Version 1.41-02) 08/2010

• Banknote Recognition: New Development.

Memo: • Added the special feature to accept both 16 and 18 digits barcode tickets.

o If a 18-digit barcode ticket is inserted while the Barcode Function Set Command has been

set to recognize 16-difit barcode tickets, that will be reported as 16 digits removing the first

two digits.

o If a 16-digit barcode ticket is inserted while the Barcode Function Set Command has been

set to recognize 18-digit barcode tickets, that will be reported as 18 digits adding “00” to

the front. This feature can be enabled/disabled by the DIP-switch #7.

• Supports 2-way and 4-way ticket acceptance, configurable using DIP switch 6.

• Software Download of ID-003 does not guarantee a baud rate of 38400bps.

• Without "Illegal Credit" function.

• This firmware may accept notes of series older than the years listed due to similarities in patterns

© JCM


File:


5/8

although these notes are not officially supported by this firmware.

Images Year(s)

(MRI Ref #) Front Back

‘95

(AUD5.4)

‘01

(AUD5.5)

‘15

(AUD5.6)

’95-‘01

(AUD10.4A)

’02-

(AUD10.4B)

‘17

(AUD10.5)

’94-‘01

(AUD20.3A)

’02-

(AUD20.3B)

© JCM


File:


6/8

Year(s)

(MRI Ref #) Front Back

'19

(AUD20.4)

’95-’01

(AUD50.2A)

’02-

(AUD50.2B)

‘18

(AUD50.3)

‘96-‘99

(AUD100.2A)

‘08-

(AUD100.2B)

'19

(AUD100.3)

© JCM


File:


7/8

Dip Switch Settings # Dip Switch

1 OFF 5 ENABLE

ON 5 DISABLE

2 OFF 10 ENABLE

ON 10 DISABLE

3 OFF 20 ENABLE

ON 20 DISABLE

4 OFF 50 ENABLE

ON 50 DISABLE

5 OFF 100 ENABLE

ON 100 DISABLE

6 OFF 2-Way Ticket Acceptance (Standard)

ON 4-Way Ticket Acceptance

7 OFF Special Feature for 16 and 18 Digits Barcode Ticket: DISABLE

ON Special Feature for 16 and 18 Digits Barcode Ticket: ENABLE

8 OFF OFF

ON Test Mode

© JCM


File:


8/8

ID-003 Data Setting Specification

VERSION DATA

SW. Version i(AUS)100-SS ID003-05V286-44 21SEP20 DC92

Boot Version B03/B04/B05

ESCROW DATA CURRENCY ASSIGN DATA Code Denomination Code Country Denomination Exp.

61h Reserved 61h 00h 00h 00h


63h 5 63h 02h 05h 00h

64h 10 64h 02h 0Ah 00h

65h 20 65h 02h 14h 00h

66h 50 66h 02h 32h 00h

67h 100 67h 02h 64h 00h


ENABLE/DISABLE DATA SECURITY DATA

DATA bit Data 1 Data 2 DATA bit Data 1 Data 2

0 Reserved Reserved 0 Reserved Reserved 1 Reserved Reserved 1 Reserved Reserved 2 5 Reserved 2 5 Reserved 3 10 Reserved 3 10 Reserved 4 20 Reserved 4 20 Reserved 5 50 Reserved 5 50 Reserved 6 100 Reserved 6 100 Reserved 7 Reserved Reserved 7 Reserved Reserved

0: Enable 1: Disable (Default: 8300h) 0: Normal 1: Security Level high (Default: 0000h)

DIRECTION DATA OPTIONAL FUNCTION DATA

DATA bit Direction Sample denomination:100

DATA bit Data 1 Data 2

0 ‘A’ Direction

A → B

(FA) (FB)

D → C

(BB) (BA)

0 Not used Not used

1 ‘B’ Direction 1 Power Recovery [02] Not used

2 ‘C’ Direction 2 Not used Not used

3 ‘D’ Direction 3 24char bar ticket accept [08] Not used

4 Not used 4 Not used Not used

5 Not used 5 Nearly Full [20] Not used

6 Not used 6 Entrance Sensor Event [40] Not used

7 Not used 7 Encryption [80] Not used

0: Enable 1: Disable (Default: 00h) 0: Disable 1: Enable (Default: 0000h)

BAR CODE FUNCTION DATA

Code Function

Data 1 01h Barcode type (interleaved 2 of 5)

Data 2 12h Character length (18 char)

FFh Multi Barcode Ticket acceptance in the range 16, 18 and 24 char tickets.

Back 100

100

Front

Software Information Sheet

Documents

Transcript of Software Information Sheet