------------------------------------ Software Chronograph copyright (c) 2007 mcMike------------------------------------version 1.0Notes and Known Bugs-----------------some settings might not change during runtime. To make sure restart program - especially after switching units-96Khz recording is the best and this is what program is designed for. With other frequencies some problem or misbehavior might occur-program only supports 96Khz 8-bit mono wave files. Shot wave saved from other setup with 44.1Khz behaves incorrectly when loaded to another program setup to 96Khz -shotwaves saved from other setups does not countain target distance and trigger volume information. Therefore the analyse is not correct unless you use same settings-native waveout playing is not working. Playing is done with external API and temp file-multiple triggers during recording is not supported and measuring may behave incorrectly (only once per 1.5 seconds)-interal microphone/volume selection does not work correctly on all systems. It is disabled. Use settings from Volume Control for Recording-main window is disabled during analyzing. Close analyzing first to exit