SERVICE MANUAL - Master Parts: Remington Parts, Comfort Glow Parts
SMPE | Automotive Parts Manufacturer | Fuel Parts | Intermotor · 2019. 2. 7. · Created Date:...
Transcript of SMPE | Automotive Parts Manufacturer | Fuel Parts | Intermotor · 2019. 2. 7. · Created Date:...
-
Diesel Core Acceptance and Rejection Guide
Explanations to Returns Common Rail Pumps Common Rail Injectors
Electronic Unit Injectors
Green - Return AcceptedOrange - Subject to Inspection
Red - Not Accepted
Please note, this is intended as a guide only incase of
any doubt please contact us on 01623 886400
Heavy Corrosion Damaged Housing
Damaged Housing DamagedFuel Inlet
Heavy Corrosion
Damaged Nozzle
Damaged Connector
Missing Solenoid
Damaged Body
Damaged Shaft
Damaged Flange/ Minor Blemishes
Heavy Corrosion
Damaged Shaft/ Tang Drive
Damaged Electrical Connection
Illegible Serial Number
Units returneddismantled and/ or with missing components
ARE NOT ACCEPTED
The units shown here are Bosch pumps, however, the same principles apply to Delphi, Denso and
Siemens Applications.
If any of the non metallic components are either broken or missing then the unit may still be accepted.
ENSURE THAT THE SOLENOID IS FITTED TO THE INJECTOR.
Common rail injectors are often partially dismantled when removed from the engine. As a result the injectors
are returned without the solenoid being refitted. If the Injector is not complete the injector cannot be
reconditioned as the core has NO VALUE
01623 886400