Smoke Detection System SDS-2/6 - safetec-online.de Part... · Smoke Detection System SDS-2/6 For...
-
Upload
dinhnguyet -
Category
Documents
-
view
230 -
download
1
Transcript of Smoke Detection System SDS-2/6 - safetec-online.de Part... · Smoke Detection System SDS-2/6 For...
Smoke Detection System SDS-2/6
For Cargo Holds Onboard Ships acc. to SOLAS Chapter II-2 Regulation 13-1
Spare Part List
Issue 2.2 16.08.06 DOK03.012
safetec Brandes und Niehoff GmbH Arenskule 7-9
D-21339 Lüneburg Germany
Tel.: ++49 - 4131 - 34182 Fax.: ++49 - 4131 – 34057
E-Mail: [email protected] Internet: http://www.safetec-online.de
Contents • Spare Parts for Smoke Detection System SDS-2/6 • Spare Parts in Detection Panels and Extension Panels • Spare Parts in Repeater Panel • Spare Parts in Fan Units SDS-M0420 and SDS-M0430 • Detailed List of all Spare Parts
safetec Components for Smoke Detection System SDS SDS01.100.161:15Gez.: 22.10.97 kb
SDSSMOKE DETECTION SYSTEM
ACCEPT
SDS01.300
Z90.010
SDS01.106
BG02.035
1)
SDSSMOKE DETECTION SYSTEM
ON FAULT
ACCEPT
FIRE
Z90.001
SDS01.206
BG01.922
Z02.002
BG01.930
Z12.010
BG01.923
BG02.035
1)
2)
BG02.035
Z07.010
1) Steel Pipe 1 1/2"2) Elbow, Steel
2)
air outlet
SDS01.430
FAN01.005
1
2
3 4
5
6 7
8
9 10
11
12
F2
FlachkabelsteckerFlatcable-Connector
Detektorinterface SDS 0700
17 18 19 20
17 18 19 20
24V 0V A B
4 1
5 8
4 1
5 8
4 1
5 8
36 35 34 33 32 31
1 2
HauptstromM ain Supply
Erwei terungsgerätExtension Unit
HinweisWenn kein Fernanzeigegerät oder Erwei terungsgerätangeschlossen werden, m üssen die n icht be legten Anschlüsse 19 und 20 m it Abschlußwiderständen120 Ohm versehen werden.
Rem arkIf no Repeater Panel or Extension Uni t is connected,the term inals 19 and 20 must be fitted wi th resistors120 Ohm.
N
4-6 1-3 + -
Luftfluß-sensorenAirflowIndicators
Rauch-m elderSm okeDetect.
Erdungs-schieneEarth Bar
L1
3 4
NL1
5 6
L N
7 8 9 10
L N L N
NotstromEm ergency-Supply
Lüfter 2Fan 2
Lüfter 1Fan 1
HupeSounder220V m ax 1A
NC NO NC NO NC NO24V 0V A B
C C C 24V 0V A B
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 17 18 19 20
General -a larm
FeuerFi re
StörungFaul t
FernanzeigegerätRepeater Panel
RelaiskontakteContactra ting60V 1,25A AC/DC
F1T ransform atorT ransform er1A t
F2GleichrichterRecti fier1,6A m
F3, F4Bus2 x 0,125A f
F7, F8LüfterFan 2
F5, F6LüfterFan 150Hz: 4 x 6 ,3A t60Hz: 4 x 8A t
F9, F10Hupe Sounder230V2 x 1A m
M asseanschluß für E ingangsfi l terEarth Connectionfor Fi lter
Zum Abschalten der Rauchm elde-anlage Sicherung F1 herausdrehen
Remove F1 to stop operationof Sm oke Detection System
F2, F3Bus2 x 125mA f
X5 X6 X7
X2
X8
Zener - Barrieren
berei ts werkssei tig angeschlossenwired by manufactorer
F1Supply0,4A m
Strom versorgungseinheit SDS 0601Power Supply Unit
safetec
F5F6
F7 F9F8 F10
F3 F4F11
F1
F1 F2 F3
Detector Box, opened,with Smoke Detector
Indication-/Control ModulePower Supply Module
Terminal PlanFlat Cable
E08.001
Z01.001
E01.001
BG01.701
E06.003
BG01.720
BG01.530
Detector Interface Module
Zener Barriers
SDS01.100.17Article nos. and Serial nos. ofComponents in Smoke Detection Panel SDS
"???" stands for the production no. For identification please indicate full serial nos.!
BG01.603
Serial No. of Indication-/Control Unit (500/??? or 520/??? or 530/???)Serial No. of Detector Interface Module (700/??? or 720/??? or 730/???)Serial No. of Power Supply Module (600/??? or 601/???)
Rev 4: 18.08.99 kbGez.: 03.11.97 kb
safetec 1:2 SDS01.300.10
BG01.304
Components for Repeater Panel
lower part of repeater panel, view inside upper part of repeater panel, view inside
BG01.531
Press to disconnectflat-cable
Indication-/Control ModuleAdapter-PCB
Rev.4:Gez.:
01.06.99 kb01.12.97 kb
Serial No. under Cover Plate(500/??? or 520??? or 531/???)
"???" stands for the production no. For identification please indicate full serial no.!
safetec
fan_spares Rev.4 16.08.2006 Page 1 of 1
Overview: Spare Parts for safetec Fan Units Type
Version (Serial Nos.)
Spares (Type, safetec Art.No.) Layout
SDS-M0420 From 420.0010
• Motor: Elektror, Art.No. FAN01.002-nicht mehr lieferbar • Capacitor: Type 20µF, Art.No. FAN01.003 • Alternative:
Hanning, Art.No. FAN02.122 (9kg) • Capacitor: Type 12µF, Art.No. FAN02.115 • V-Belt: Art.No. FAN01.006 • Impeller: Art.No. FAN02.019 • Motor Holder: Art.No. FAN02.213 • Ball Bearing: Type: 6202-2ZC3 Art.No. FAN01.004
Type: 6205-2ZC3 Art.No. FAN01.010 Alternative:
• Module including 1 motor with holder, impeller and v-belt Art. No. FAN01.001
Keilriemenantrieb 60kg
Version 1: 430.0010 to 430.1530
• Motor: EMOD, Art.No. FAN02.100 *) • Capacitor: Type 16µF, 450V AC, Art.No. FAN02.111 • Impeller: Art.No. FAN02.004 – not available anymore.
Alternative: Art.No. FAN02.015 • Motor Holder: Art.No. FAN02.003 **) • Ball Bearing: Type: 6202-2RS1 Art.No. FAN02.029
Version 2: 430.1540 to 430.5290
• Motor: Type EMOD, Art.No. FAN02.100 *) • Capacitor: Type 16µF, 450V AC, Art.No. FAN02.111 • Impeller: Art.No. FAN02.004 – not available anymore.
Alternative: Art.No. FAN02.015 • Motor Holder: Art.No. FAN02.003 **) • Ball Bearing: Type: 6202-2RS1 Art.No. FAN02.029
SDS-M0430 230V (50kg)
Version 3: From 430.5300
• Motor: Type Hanning, Art.No. FAN02.121 • Capacitor: Type 10µF, 450V AC, Art.No. FAN02.116 • Impeller: Art.No. FAN02.015 • Ball Bearing: Type 6202-2ZC3 Art.No. FAN02.036
Type 6204-2ZC3 Art.No. FAN02.037
SDS-M0431 110V
431.010 to 431.160
• Motor: Type Hanning, Art.No. FAN02.131 • Capacitor: Type 40µF, 450V AC, Art.No. FAN02.114 • Impeller: Art.No. FAN02.015 • Ball Bearing: Type 6202-2ZC3 Art.No. FAN02.036
Type: 6204-2ZC3 Art.No. FAN02.037
SDS-M0440 230V
From 440.1
• Motor: Type Hanning, Art.No. FAN02.121 • Capacitor: Type 10µF, 450V AC, Art.No. FAN02.116 • Impeller: Art.No. FAN02.018 • Ball Bearing: Type 6202-2ZC3 Art.No. FAN02.036
Type 6204-2ZC3 Art.No. FAN02.037
SDS-M0441 110V
From 441.1
• Motor: Type Hanning Art.No. FAN02.131 • Capacitor: Type 40µF, 450V AC, Art.No. FAN02.114 • Impeller: Art.No. FAN02.018 • Ball Bearing: Type 6202-2ZC3 Art.No. FAN02.036
Type 6204-2ZC3 Art.No. FAN02.037
*) Motor type is not available anymore. Alternative deliverable arrangement, comprising with FAN02.121 + FAN02.006 + FAN02.015 + FAN02.023 + FAN02.035 + MET01.020 + MET01.021 (siehe Zng.) **) Motor holder is not available anymore. Remark: Exchange of ball bearings of motor holder is complicated and hardly to be done proper without special Tools. When extracting the impeller it may come to an unbalance which may create vibrations and ball Bearing damage if not properly balanced again. Alternative: Pre-assembled driving module, Art.No. BG01.400 comprising with 8, 9, 10, 11, 12. (12kg)
safetec Fan Unit, Front viewLüftereinheit SDS-M0430 230V 50/60Hz, Ansicht von vorne Rev.
Gepr.Bearb. 19.04.96
14.05.02 NieJP13.05.02
SDS01.430.1.tcd1:5Maßstab
kb
6
14.05.02Ausgabe:
1
50
50
40
160
910
> 5 mm
> 5 mm
449
2
10
Gültig ab Seriennummer 430.5300Valid from Serial No. 430.5300 on
5 7 4 9
8
11
36
12
1 Befestigungswinkel Mounting Angle2 Laufradgehäuse Impeller Housing3 Sammelkanal Druckseite Air Outlet Manifold4 Sammelkanal Ansaugseite Air Inlet Manifold5 Lufteintritt / Air Inlet
6 Luftaustritt / Air Outlet 7 Rückschlagklappe Non Return Flap 8 Abdeckplatte Cover Plate Art.No. FAN02.006 9 Lüfterrad / Impeller Art.No. FAN02.01510 Flachdichtung / Flat Sealing Art.No. FAN02.023
11a Dichtring / Sealing Art.No. MET01.03511b Stützring / Ring Art.No. MET01.02011c Deckel / Cover Art.No. MET01.02111d Schraube / Screw Art.No. V01.042
12 Motor ab / from serial No. 430.5300: Art.No. FAN02.12112a Kugellager Wellenseite Ball Bearing Shaft Side Type 6204 2Z C3 Art.No. FAN02.03712b Kugellager gegenüber Ball Bearing opposite Type 6202 2Z C3 Art.No. FAN02.036
Remark (Art.No. BG01.400):Pre-Assembled driving-module consisting of:Pos. 8, 9, 10, 11, 12for conversions fromprevious to current version.
safetec Spare Part List System SDS-2/6
Art.No.DescriptionType Remarks Outline
BG01.304
Adapter-PCB forRepeater Panel
System SDS-2/6
PCB in repeater panel with screwed terminals for cableconnections and flatcable - connector for indication- /control module BG01.501. The adapter - pcb containsrelays and terminals for fire, fault and general alarm aswell as terminals for external buzzer.
Dimensions: 110 x 60 x 15 mmWeight: 80g
BG01.400
Fan Module for Fan UnitSDS-M0430
System SDS-2/6
includes motor, motor holder, cover plate, impeller,sealings and mounting material.
Dimensions: 370 x 260 x 370 mmWeight: 13,3kg
BG01.530
Indication- and ControlModule for SmokeDetection Panel
System SDS-2/6
The indication - / control module is mounted behind thefront door of the smoke detection panel. It contains LC -display, LEDs and push - button for the operation of thesystem. This module BG01.530 may also be replacedby the indication - / control module BG01.531. TheBG01.531 has an additional automatic dimmer toreduce the brightness of the LEDs in a darkenvironment.
Dimensions: 182 x 105 x 38 mmWeight: 270g
BG01.531
Indication- and ControlModul for RepeaterPanel
System SDS-2/6
The indication - / control module is mounted behind thefront cover of the repeater panel. It contains LC -display, LEDs and push - button for the operation of thesystem. This module BG01.531 may also be replacedby the indication- / control module BG01.530, exceptthat the BG01.530 has no automatic dimmer to reducethe brightness of the LEDs in a dark environment.
Dimensions: 182 x 105 x 38 mmWeight: 270g
BG01.602
Power Supply Module,add. 24VDC Emerg.Supply
System SDS-2/6
same as BG01.603, but with additional terminals for 24VDC emergency power supply.
Freitag, 18. August 2006 Page 1
safetec Spare Part List System SDS-2/6
Art.No.DescriptionType Remarks Outline
BG01.603
Power Supply Module
System SDS-2/6
The power supply unit is mounted in the smokedetection panel. It contains all power connections formain and emergency supply and for the fan unit as wellas fuses and terminals for relay contacts.Replaces BG01.600 and BG01.601.
Dimensions: 176 x 160 x 55 mmWeight: 1200g
BG01.720
Detector InterfaceModule
System SDS-2/6
The detector interface module is mounted in the smokedetection panel and in the extension unit. It interfacesthe smoke detectors and airflow indicators to thesystem bus.
Dimensions: 107 x 88 x 40 mmWeight: 100g
DOK02.021
Manual for SDS-2/6,German Version
SDS-2/6
size: DIN A4approx 50 pages
weight: 330g
DOK02.031
Manual for SDS-2/6,English Version
SDS-2/6
size: DIN A4approx 50 pages
weight: 330g
E01.001
Airflow Indicator, forSDS-2/6 or SDS-48
Type 604
The airflow indicator ( pressure switch 0,2 - 3 mbar ) ismounted in the upper enclosures of the smokedetection panels and extension units. The standardadjustment is 0,3 mbar.
Dimensions: D=81mm H=50mmWeight: 120g
Freitag, 18. August 2006 Page 2
safetec Spare Part List System SDS-2/6
Art.No.DescriptionType Remarks Outline
E06.003
Zener Barrier Z967
System SDS-2/6
The zener barrieres are mounted in the smokedetection panel. Electrically they are located betweensmoke detectors and airflow indicators on one handand detector interface module on the other hand toensure intrinsically safe operation.
Dimensions: 115 x 12,5 x 110 mmWeight: 150g
E08.001
Smoke DetectorBHH-31A/Ex
System SDS-2/6
The smoke detctors are located in the detector boxes ofthe smoke detection panel and the extension unit.
Dimensions: 145 x 67 mm ( including base )Weight: 300g
E08.002
Base for SmokeDetector BWA-40A/1
System SDS-2/6
The bases for smoke detctors are located in thedetector boxes of the smoke detection panel and theextension unit.
Dimensions: D = 145 mmWeight: 300g
E08.801
Testspray for SmokeDetectors
918/5
for use on close distances to test smoke detectorsContent: 250 ml
weight: 125g
FAN01.001
Fan with V-Belt for FanUnit SDS-M0420
HRE 1/2 T/S 458
Dimensions: 440 x 370 x 240 mmWeight: 12,5kg
Freitag, 18. August 2006 Page 3
safetec Spare Part List System SDS-2/6
Art.No.DescriptionType Remarks Outline
FAN01.003
Capacitor for Fan UnitSDS-M0420, Motor:Elektror
20 µF
Maker of motor: Elektror72 x 45 mmCable: 40 cmThread: M8
Dimensions: D = 45; H = 120 mmWeight: 220g
FAN01.004
Ball Bearing for Fan UnitSDS-M0420
6202 - 2ZC3
Location: V-belt housing (inner side)
Dimensions: D = 35; H = 10 mm Weight: 50g
FAN01.006
V-Belt for Fan UnitSDS-M0420
for HRE 1/2 T S 458
Dimensions: D = 200 mmWeight: 40g
FAN01.008
Clamp for CapacitorFAN01.003
Dimensions: D = 50 mmWeight: 20g
FAN01.010
Ball Bearing for Fan UnitSDS-M0420
Type 6205 -2ZC3
Location: V-belt housing (outer side)
Dimensions: D = 50; H = 15 mmWeight: 100g
Freitag, 18. August 2006 Page 4
safetec Spare Part List System SDS-2/6
Art.No.DescriptionType Remarks Outline
FAN02.015
Impeller, Alu, TL-HL300x49-R
for SDS-M0430/431
Diameter: 300 mmWeight: 920 g
FAN02.019
Impeller, Alu, for FanUnit SDS-M0420
Lüfter HRE 1/2
Dimensions: D = 250; H = 30 mmWeight: 600g
FAN02.029
Ball bearing for Fan UnitSDS-M0430, Motor:EMOD
Type 6202-2RS1
for fan unit SDS-M0430 with motor type "EMOD"
Dimesions: D = 35; H = 10 mmWeight: 50g
Fan02.035
sealing for motor shaft,for SDS02.440
PTFE
Suitable for installation on FAN-unit SDS.02.440 andSDS02.441.
Weight: 8g
FAN02.036
Ball bearing for Fan UnitSDS-M0430 / M0440
Type 6202 2Z C3
for fan unit SDS-M0430 with motor type "Hanning"Location: opposite of shaft side
Dimensions: D = 35; H = 10 mmWeight: 50g
Freitag, 18. August 2006 Page 5
safetec Spare Part List System SDS-2/6
Art.No.DescriptionType Remarks Outline
FAN02.037
Ball bearing for Fan UnitSDS-M0430 / M0440
Type 6204 2Z C3
for fan unit SDS-M0430 with motor type "Hanning"Location: shaft side
Dimensions: D = 35; H = 10 mmWeight: 50g
FAN02.100
E-Motor,1Ph.230V,50/60Hz,for Fan Unit SDS-M0430, Emod
71L/2EHB0
Maker of motor: EMODElectric motor for fan unit SDS - M0430for serial nos. of fan unit 430.0010 through 430.5290for later fan units see FAN02.121
Dimensions: D = 150; H = 240 mmWeight: 7 kg
FAN02.111
Capacitor for Fan UnitSDS-M0430, Motor:Emod
16 µF 450VAC
for fan motor art. no. FAN02.100(serial nos. of fan unit 430.0010 through 430.5290)
Dimensions: D = 40; H = 80 mmWeight: 100g
FAN02.112
Capacitor for Fan UnitSDS-M0440
10 µF 450VAC
for Fan Motor Art. No. FAN02.121(serial nos. of fan unit 430.5300 and higher)
Dimensions: D = 35; H = 110 mmWeight: 100g
FAN02.114
Capacitor for Fan UnitSDS-M0441, Motor:Hanning
40 µF 240VAC
For Fan Motor Art. No. FAN02.131
Dimensions: D = 45; H = 110 mmWeight: 200g
Freitag, 18. August 2006 Page 6
safetec Spare Part List System SDS-2/6
Art.No.DescriptionType Remarks Outline
FAN02.115
Capacitor for Fan UnitSDS-M0420, Motor:Hanning
12 µF 450VAC
For Fan Motor Art. No. FAN02.122
Dimensions: D = 40; H = 80 mmWeight: 100g
FAN02.121
E-Motor,1Ph. 230V,50/60Hz, Hanning, forFan Unit
E7KC2B5-7-378
Electric motor for fan unit SDS - M0430for serial nos. of fan unit 430.5300 and higherMaker of motor: HanningCapacitor: see FAN02.112
Diam.: 350 mmWeight: 6,1 kg
FAN02.122
Electric Motor, 1 Ph.230V, 50/60Hz,Hanning, for Fan Unit
E7D2B-7-390
Electric motor for fan unit SDS - M0420Maker of motor: HanningCapacitor: see FAN02.115
Dimensions: D = 150; H = 280 mmWeight: 7 kg
FAN02.213
V-belt drive enclosue forFan Unit SDS-M0420
TN15782
Dimensions: 320 x 220 x 100 mmWeight: 2kg
SDS01.910
Spare Part Set withV-Belt
for SDS-M0420
Spare part set for smoke detection system with fan unitSDS - M0420 contains:
10 pcs fuse quick acting 125 mA10 pcs fuse medium acting 0,4A10 pcs fuse medium acting 1A10 pcs fuse medium acting 1,6A10 pcs fuse medium acting 8A1 pc spare key for SDS5 pcs blind gland PG161 pc v-belt for fan unit SDS-M0420
Freitag, 18. August 2006 Page 7
safetec Spare Part List System SDS-2/6
Art.No.DescriptionType Remarks Outline
SDS01.911
Spare Part Set
for SDS-M0430
Spare part set for smoke detection system with fan unitSDS - M0430 contains:
10 pcs fuse quick acting 125 mA10 pcs fuse medium acting 0,4A10 pcs fuse medium acting 1A10 pcs fuse medium acting 1,6A10 pcs fuse medium acting 8A1 pc spare key for SDS5 pcs blind gland PG16 Weight: 125g
Z02.002
Flexible Hose (PVC)
inner diam.13x3,5mm
material: PVC 8020 / 7020color: 29101 transparentnominal pressure at 20¦C: 10 bar
suitable for connection between air sample inlets ofsmoke detection panels / extension panels / 3-wayvalves
weight: 230g per meter
Z02.004
Flexible Hose withSpiral,diam.50mm
Airduc,PVC 343,grey
suitable for connection between smoke detectionpanels and air fan units, when steel pipe laying causesproblems (to be approved by class surveyor)material: - PVC - steel spiralcolor: grey
weight: 540g per meter
Z02.014
Hose Clamp, 50-70 mm
galvanized
50 - 70 mm diametersuitable for connection of PVC-hose Z02.004 or forother purposes
weight: 40g
Freitag, 18. August 2006 Page 8