SMB BIM - Indico · SMB 6 BIM B I M BUILDING INFORMATION MODELING MODELING -> 3D MODEL INFORMATION...

SMB

1

BIM SMB/SE

29/03/2019INDICO: 806937

SMB

2

EVENT AGENDA

SMB

3

BIM GENERAL PRESENTATION

SMB/SE/TOD

29/03/2019EDMS:2131872

Raul Fernandez Ortega

SMB

4

1. BIM2. BIM Dimensions3. BIM Maturity degree and LOD4. BIM Process-Roles5. BIM in the World / Europe6. BIM at TOD Section. Timeline7. BIM & alt. at CERN8. Next steps

PRESENTATION OVERVIEW

SMB

5

1. BIM2. BIM Dimensions3. BIM Maturity degree and LOD4. BIM in the World / Europe5. BIM Process-Roles6. BIM at TOD Section. Timeline7. BIM & alt. at CERN8. Next steps

SMB

6

BIM

B I M

BUILDING INFORMATION MODELING

MODELING -> 3D MODEL

INFORMATION -> LINKED

BUILDING -> CONSTRUCTION

BIM or Building Information Modelling is a process for creating and managing information

on a construction project across the project lifecycle. One of the key outputs of this

process is the Building Information Model, the digital description of every aspect of the built

asset. This model draws on information assembled collaboratively and updated at key

stages of a project. Creating a digital Building Information Model enables those who

interact with the building to optimize their actions, resulting in a greater whole life value

for the asset.

SMB

7

BIM

Calculations (structural, thermal…)Preliminary/Tender design

Feasibility

Strategy

Construction Design

ConstructionPlaningCost control

ManufacturePrecast

Logistics

TransformationNew uses

Demolition

Facility management

FULL COORDINATION

SMB

8

BIM PROCESS

Strategy -> IPP – example SF8

SMB

9

BIM PROCESS

Feasibility -> IPP – example 179

SMB

10

BIM PROCESS

Preliminary/Tender -> example 196

SMB

11

BIM PROCESS

Calculations -> Integration for false floors

SMB

12

BIM PROCESS

Construction -> example 255-355

SMB

13

BIM PROCESS

Manufacture -> Include in new blanket contracts (Toilet refurbishment, steel structure)Planning -> Include from IPP (coordination with Microsoft Project – other)Logistics -> delivery by element (external firms)

Use/Facility management -> Introduction of the FM (GMAO – Infor, others) -> example 376

SMB

14

BIM PROCESS

Transformation/demolition -> example 212; Include a new phase in the 3D model for upgrade

SMB

15

BIM BENEFITS

Control of Cost Estimation

Easy coordination, better designMore information in the model

Maintenance & FM

Control of the whole lifecycle,To the dismantling of the building

Control of PlanningEnergetic efficiency integrated

Easy to adapt and modify

Be a Reference

SMB

16


SMB

17

BIM Dimensions

1. Isolated work

2. Collaboration, sharing separated models3. Direct collaborative work. Integration

4. Schedule, planing, time.

5. Cost estimation6. Sustainability, energy

7. Facility management

SMB

18

1. BIM2. BIM Dimensions3. BIM Maturity degree and LOD-LOI4. BIM Process-Roles5. BIM in the World / Europe6. BIM at TOD Section. Timeline7. BIM & alt. at CERN8. Next steps

SMB

19

BIM Maturity degree

OLD METHODOLOGYHAND MADE DRAFTING

COLABORATION, USER GUIDES FULLY INTEGRATEDGLOBAL STANDARDS3D DRAWINGS BIM OBJECTS

SMB

20

BIM LOD/LOI

SMB

21

BIM LOD

https://bimforum.org/lod/

Uniformat codeB2010.20.30

Omniclass code21-02 20 10 20 30

Exterior Wall Construction (Masonry)

200

300

350

400

https://bimforum.org/lod/

SMB

22

BIM LOI

SMB

23


SMB

24

BIM Process-Roles

ROLES IN THE PROJECT FUNCTIONS MAIN ROLES/BIM ROLES

Owner Strategic plan (CERN, Masterplan…) Owner

Client Definition of needs, budget Client

Contract manager Responsible of contracts, tenders, etc. Procurement, legal advice

Project Manager Global Management Project Manager

BIM Manager Responsible for BIM execution BIM Manager

BIM Coordinator Integration of the models BIM Coordinator

BIM Architect Responsible for architectural design BIM designer per discipline

Build Manager Responsible for building operations

Structural engineer Responsible for structural design

MEP engineer (electricity, plumbing, heating, ventilation)

Responsible for MEP design

Interior architect Responsible for interior design

Bioclimatic designer Responsible of the energetic studies

Construction manager Work supervisor/work manager Construction manager

FM-Facility management Responsible of the maintenance BIM FM-Facility management

Quantity surveyor Responsible of cost estimation/control

Health and safety coordinator Responsible of health and safety Health and safety coordinator

SMB

25



SMB

26

BIM in the world

SMB

27

BIM IN THE WORLD

MEXICO (2017)

PERU (2022)

BRAZIL (2021)

CHILE (2020)

NORWAY (2016)

RUSIA (2017)

UK (2016)

SWITZERLAND (?)

France (2020)

NETHERLANDS (2012)

SPAIN (2020)

ITALY (2022)

DUBAI (2019)

QUATAR (2019)

SINGAPORE (2015)

KOREA (2012)

JAPAN (?)

CHINA (?) HONG KONG (2014)

AUSTRALIA (2019)

NEW ZEALAND (?)

SWEDEN (2019)

BELGIUM (?)GERMANY (2020)

AUSTRIA (2015)PORTUGAL (?)

CZECH REPUBLIC (?)CANADA (2014)

UNITED STATES (2008)

FINLAND (2007)

DENMARK (2012)

SMB

28



SMB

29

BIM Timeline at TOD

2015 201820172016 2019

LS1 LS2E-YETS YETS

Revit and BIM TrainingRevit Training

Revit designer«BIM» technical student

Revit and BIM Training

General implementation ?

DocumentationInternal tests and projects

New projects with external consultantsImplementation in DOP

Training

Development

Implementation

SMB

30

BIM Timeline at TOD

2015 201820172016 2019

LS1 LS2E-YETS YETS

Revit and BIM TrainingRevit Training

Revit designers

Revit and BIM Training

General implementation ?

DocumentationInternal tests and projects

New projects with external consultantsImplementation in DOP

Training

Development

Implementation

2020 2021 2022

RUN 3 LS3

Training

Development

Implementation

Continuous Revit and BIM Training

Update standards and documents (templates, guidelines, BEP, …)

95% in TOD work; support to other servicesProvide internal training

Connection to GIS and EDMS

Building permit

SMB

31

BIM at TOD Section

NOWADAYS AT TOD

• Done• BIM Protocol/guidelines for the new projects (Basic BPEP-BIM Project Execution Plan)• Revit template• Basic library• Style guidelines• BIP (BIM Implementation Plan)

• In preparation• General BEP (BIM Execution Plan)• Detailed BPEP (BIM Project Execution Plan)

• To continue• Regular update of all the documents (Style guidelines, BEP)• Update of the template• Update of the library

SMB

32

100 buildings in Revit

20 buildings with good 3D models20 partial buildings for specific studies20 schematic buildings for support to other projects40 new buildings 2019-2023

BIM at TOD Section (REVIT MODELS)

SMB

33

BIM at TOD Section (CATIA MODELS)

SMB

34



SMB

35

BIM & alt at CERN

• SMB-SE-TOD• Coordination with Patrimoine -> Topo, GIS-GIS3D information, Planotheque

• SMB-SE-HE• Coordination with HE -> BIM 3D – Collaborative work in Revit

• SMB-SE-MP/TP• Coordination for new projects

• SMB-SE-CBS/TP/MP• Coordination to complete data-materials sheet -> BIM 7D facility management

• EN-CV• Coordination with CV -> BIM 3D – Collaborative work in Revit

• EN-EL• Not collaboration for the moment (EL is still using CATIA)

• OTERS….. (EN-ACE -> PLM and multicad platforms)

TEAMS WORKING WITH THE BIM METHODOLOGY

SMB

36

BIM & alt at CERN

• CAEC (Computer Aided Engineering Committee)

• Official group for DAO/CAD, Standards, etc. (activities concerning tools and

support for computer aided mechanical engineering and related fields at CERN)(Recognition of BIM platforms as a possible Tool/Standard for CERN)

• MULTICAD PLATFORMS (IT-CAD SUPPORT)(Possibility to use different software for each discipline)

• INTEGRATION (EN-ACE)• In charge of the integration for the machine projects (3D Models)(Possibility to use BIM models without any/minimum transformation)

• CAD 2021 (working group)• PLM software replacement(Compatible PLM system with BIM software – Focus on Revit -)• Smarteam-CDD synchronization

OTHER RELATED WORKING GROUPS

SMB

37



SMB

38

Next steps

Organization:• Complete the documentation (Templates, Guidelines, BEP, BIP, etc.)• PLM system (analysis and implementation plan)

Management:• New projects in BIM (Using Revit for the moment)• Projects in different phases -> Different relation internal teams and external

consultants

Coordination:• Revit / Catia• Work with other groups/departments (Integration, CAEC, etc) using Revit• Work with external consultants using Revit

SMB

39

EVENT AGENDA

SMB

40

Summary

SUMMARY & FUTURE

SMB

41

Summary

All the projects in BIM (Revit in priority)All medium-big projects in RevitFull integration (3D models, 2D drawings, materials, FM, …)

Automatic update of the geometry , annotations, dimensions, schedules …Facilitate synchronization between all the drawings : plans, elevations, sections, perspective, etc...Multidisciplinary approach (coordination)Enhanced detail and qualitySaving time and effort in modification tasksNo (re)work is being duplicated : implementation of plans according to project phases / level of detail / level of information

BIM Model contains:Graphic informationIntegrated database (Bill of quantities, lists, planning, cost, materials, …)Integrated GMAO in the 3D models

COORDINATION – INTEGRATION – SHARING INFORMATIONExchange in both directions CATIA REVITCE models shared with every serviceCE geometry databaseAccess to services modelsExternal CE consultants working in BIM/Revit

SMB

42

Future

3D SCAN

GISPLM

VR-AR

HOLOLENS

BUILDING PERMIT

SMB

43

Next steps

THANK YOU

SMB

45

BIM Examples

BLD 3179-Extension

http://pano.autodesk.com/pano.html?url=jpgs/e7d5ab28-9d79-4012-a37e-bcca2a6a4e22

http://pano.autodesk.com/pano.html?url=jpgs/fc042504-f31a-4204-9d03-99a9ca984708

SMB BIM - Indico · SMB 6 BIM B I M BUILDING INFORMATION MODELING MODELING -> 3D MODEL INFORMATION...

Documents

Transcript of SMB BIM - Indico · SMB 6 BIM B I M BUILDING INFORMATION MODELING MODELING -> 3D MODEL INFORMATION...