SMART PLANT INSTALLATION

1) Please note that MSSQL latest version is 2012. Following steps to install MSSQL 2008

are still practical because it is similar to version 2012.

2) Method to install MSSQL to Smart Plant 3D are different with Smart Plant 2D

applications.

3) Microsoft .NET 4.0 for database server is a must for Smart 3D 2014. Update the .NET

to version 4.0 for MSSQL 2008 or lower.

4) Adobe Reader is a usual requirement for SPLM.

SMART 3D (2014)

Refer to Installation Guide:

Smart 3D Database Server Recommendations

Before beginning an installation of Smart 3D, verify that your servers meet the following hardware recommendations and software requirements.

Applicable Hardware Database server

File server

Hardware Recommendations Intel Xeon 5600 Series or better (64-bit instruction set, not Itanium)

16 GB to 64 GB or greater RAM depending on project size

For hard drive size, see Smart 3D Project Hardware Sizing Recommendations (on page 31)

Backup system for server

Access to DVD drive, either locally or through a network connection

1 GbE or higher network interface for client connections

Supported Operating Systems Microsoft Windows Standard/Enterprise Server 2008 R2 (64-bit) *Note: Windows7 x 64bit

Supported Database Servers Microsoft SQL Server 2008 Service Pack 3 (Standard edition for stand-alone environments; Enterprise edition for Global Workshare environments; 64-bit) (available for plant, marine, and material handling modes)

Oracle 11g R2 (11.2.0.2) with Patch 22 (Standard edition or Enterprise edition 64-bit) (available for plant mode only)

If you are going to use Oracle in a Global Workshare configuration, you also need Oracle GoldenGate 11.2.1.0.3, which is separately purchased from Oracle. There are internationalization considerations concerning the SQL Server collation settings you specify that

relate to reference data, using SmartPlant Enterprise integrated systems, Global Workshare Configuration,

multiple locales, backup/restore, reports, and upgrading to future releases. Please contact Intergraph

Customer Support for specific configuration questions.

Software Prerequisites Adobe Reader (required to view the Software License Agreement and Printable Guides. You can download Acrobat Reader from the Adobe web site.)

Microsoft XML Core Services (MSXML) 6.0 (Database server only)

Microsoft .NET 4.0 (Database server only) For more information on hardware requirements, see Smart 3D Project Hardware Sizing Recommendations (on page 31).

For information on disk space usage and determining RAID configuration, see Disk Usage (on page 198).

For specifications regarding minimum hard drive disk space requirements by the product setup, see Disk Partitioning Guidelines (on page 30).

On the server, distribute files across several disk drives with the following minimum distribution: operating system and database software on one drive, database data files on another drive, and the database log file on the third drive.

See Also Smart 3D Hardware and Software Recommendations (on page 23)

Installation of Microsoft SQL Server 2008

Sample of VM practice (Window 7 x 64bit)

1) Call up the installation image:

2) Open the Installer:

3) Click on Installation. Select New SQL Server stand-alone installation or add

features to an existing installation

4) Installation check passed. Click OK

5) Key in Product Key. Click Next

6) Accept license terms. Click Next

7) Click Install to install setup support files.

8) Click Next to proceed. For Windows Firewall, will setup the allowable port later.

9) Select all features. Some may need for 3D, some may need for 2D.

10) Accept default Instance Configuration

11) Accept default Disk Space Requirements

12) Check Collation:

13) Service Account:

14) Database Engine Configuration: Add Current User. (Administration account)

15) Analysis Services Configuration: Add Current User (Administration account)

16) Reporting Service Configuration: Install the native mode.

17) Click Next

18) Click Install

19) Finished installation. All must be Success.

20) Finished and close.

21) Check Start Menu:

Microsoft Distributed Transaction Coordinator

1) Run: Search for Component Services > Right-Click on Local DTC, select Properties

2) Select Security > Click on Network DTC Access

Click Yes to let MSDTC to restart

3) Go back Local DTCs properties again. Check everything as follows: Restart MSDTC

again.

Enable COM+ Network Access

1. Open the Control Panel.

2. Click Turn Windows features on or off to open the Server Manager.

3. On the Roles page in Server Manager, click Add Roles.

The Add Roles Wizard opens.

4. Ensure that you have completed the preceding steps listed on the Before You Begin page, and click

Next.

5. On the Select Server Roles page, select Application Server and click Next.

If the server finds any of the required features for Application Server are missing, a prompt is

displayed informing you to install those features. Click Add Required Features to allow the server to

install them automatically.

6. On the Application Server page, click Next.

7. On the Select Role Services page, select COM+ Network Access, and click Next.

Distributed COM Users Group

1) Run Computer Management

2) Right-Click Distributed COM Users, add group

3) Type in: domain\user name, or search within the network from advanced.

Noted: In Smart 3D installation guide: Create at least 1 for SP3D Admin and 1 for

SP3D User on user computer domain.

Other Installation:

1) Microsoft .NET Framework 4.0

2) Adobe Reader

Install Microsoft .NET Framework (Database Server)

1. Log on to the computer as an administrator.

2. Start Server Manager.

3. Select Features in the console tree.

4. Select Add Features in the Features Summary area.

The Add Features Wizard appears.

5. Select .NET Framework 3.5.1 Features from the list of features that you can install.

6. Click Install and follow the prompts.

Check MSSQL Services Automatic Startup

1) Run Services

2) Check following services startup type. Make sure they are all automatic startup.

Distributed Transaction Coordinator

SQL Server (MSSQLSERVER)

Register the Server:

1) Open MSSQL Server Management Studio. Select Registered Servers from View.

2) Right-Click on Central Management Servers, Register Central Management Server

3) New Server Registration

4) Click Test and the connection should show successful. Click Save

Security: New System Admin:

1) Select security under object explorer. Right-Click Logins > Select New Login

2) General: Search the admin name and assign to login name

3) Go to Server Rules, assign sysadmin.

SMART 3D Installation:

Noted: Version of latest SMART 3D is 2014_10.01 (up to date of this document)

1) Open the installer. Select Setup

2) Select Full Installation

3) Select agree the Software License Agreement terms and conditions.

4) Products & features

5) Name Generator 64-bit installation

6) Installation and completed.

SP3DNameGenerator

1) Check following:

Should have: SP3DNameGenerator ---- up to GetNewNumber

2) Right-Click SP3DName Generator > Select properties

Check the user:

You must specify an account with Windows administrative privileges on the computer.

If you are configuring the Name Generator Service on a computer on which Microsoft SQL Server 2008 SP3 is installed, the user account must also be a SQL Server Login that has a system administrator role in SQL Servers; otherwise, the Name Generator Service will not run. For information about creating a SQL Server Login and assigning administrator privileges, see Configure SQL Server 2008 Account for Name Generator Service (on page 45).

3) Check the security tab:

Firewall Port

1) Select Firewall from the Control Panel

2) Select Advanced settings

3) Open the Inbound Rules and Select New Rule

4) Select Port > Next

5) Type 135 in specific local ports and select Next

6) Click Next

7) Click Next

8) Type Name as RPC and description as Smart 3D Name Generator RPC

9) Repeat all the steps from step 1 to 8. Do it for:

Port No: 1433

Name: SQL 2008 Instance

Description: Smart 3D Name Generator SQL 2008 Instance

Port No: 1434

Name: SQL 2008 Browser

Description: Smart 3D Name Generator SQL 2008 Browser

10) Right-Click on RPC > Select Properties.

Go to Protocols and Ports > Select RPC Dynamic Ports under Local Port.

11) Allow program MSDTC.exe in Firewall.

Allow it in Domain

12) Allow File and Printer Sharing in Firewall.

13) Restart the computer.

Installing Microsoft SQL Server 2008 Client

1. Run setup.exe to start the installation.

2. From the Planning page, select System Configuration Checker to check for pre-requisite applications as well as identify potential installation problems. 3. Click Installation and select the New SQL Server stand-alone installation or add features to an existing installation option.

4. As you go through the installation process, make sure you install the Setup Support Files and review any Setup Support Rules that identify potential problems.

5. When you get to Feature Selection, select the client features that you want to include:

Client Tools Connectivity

Management Tools - Basic

Management Tools - Complete

SQL Server Books Online

6. When you get to Installation Rules, make sure all operations have passed.

7. From Ready to Install, click Install.

8. When the installation has been completed, review the summary log file for any problems.

9. Install any required service packs or upgrades for SQL Server 2008.

Register SQL Server 2008 Before using the Microsoft SQL Server 2008 SP3 software, you must register the database server with the workstation computer.

1. Open SQL Server Management Studio and click View > Registered Servers. Registered Servers appear in the left tree view.

2. In the tree view, right-click Database Engine, and select New > Server Registration in the shortcut menu. The New Server Registration dialog box appears.

3. On the General tab, enter or select the name of the server you want to register.

4. Click Save. 5. Exit Management Studio.

Smart 3D Client Installation:

1) Start the installation. Open Additional Software

2) Install the Smart Plant Schema Component Installation

3) After finish the Schema Component Installation. Go back to the main installation

page. Select Full Installation. Use back the same method to install.

4) NameGenerator and Piping Specification Remote Access Server account used back

server admin.

5) Open Component Services. Check the SP3DPipingSpecRemoteAccessServer inside

the COM+ Applications.

6) Right-Click and select properties

7) Change enable idle shutdown: Minutes: 0

8) Uncheck the enforce access checks for this application

9) SP3DPipingSpecRemoteAccessServer must show like this:

10) Otherwise need to install manually:

Right-Click Components > New Component

Click Install New Component

Go to select the SP3DRefDataMiddleTierService.dll from following:

Then add admin user that access to this features

Setup training files (Database creation)

1) Open Database wizard from Database tool

2) Select Restore a site from a backup set

3) Setup the Restore Site Database from Backup as following:

4) Click Next twice to start backup restoration.

5) Click OK

6) Click Finish

Project Management

1) Open project management

2) Check which have red question mark indicate not proper restored.

3) Select Tools > Restore

4) Select Restore one or more plant database from backup

5) Setup the Restore Plants from Backup Click Finish

6) Click Close

7) Right- Click on Plant > Regenerate Reports Database

Assign Access Permission

1) Expand the modeling tree. Right-Click Admin > Select Permission

2) Select add to add new user to the Admin group.

3) Assign the user and permission to rest of the group according to client requirement.

4) Next. Open the MSSQL Server Management Studio. Expand the tree of Database and

Security. Check the changes.

5) Right-Click on Admin user. Select properties. Check dbcreator. All the Smart3D

users are dbcreator. Admin user will have additional sysadmin status.

6) Assign dbo to default schema. For admin users, check for db_owner. For normal

users, uncheck db_owner

Update the training database:

1) Copy the sharedcontent from the training folder to programs sharedcontent folder

2) Open Smart3D project management. Expand Reference Data. Right-Click

SP3DTrain_CDB > select properties.

3) Check the path of the sharedcontent

4) Select SP3DTrain_CDB. Go to Tools > Update Custom Symbol Configuration.

5) Ok. Finished. Try open Smart 3D to test.