Smart Glass Door Lock User Manual

Special Attention:

1.Mechanical keys please keep outdoor, just in case keys lock in doors.

2.Please charge for the battery when low wattage alarm.

3.Reading this manual carefully before installation, and keep it for future reference.

1. Lock Structure

1

2.Installation2.1 Installation Steps

STEP 1 Install Sticky Sheets STEP 2 Install Striking Box

STEP 3 Install Striking Box Case STEP 4 Install Front Panel

STEP 5 Connect Front and Rear Panels STEP 6 Install Rear Panel

STEP 7 Install Batterys

2

3. SpecificationsSuitable for Models E10

Materials Metal,Plastic

Lock Size 188*75mm

Unlocking way

FingerprintPassword

CardRemote ControlMechanical key

Colour Silver

Doors Applicable Glass Door

Door Thickness to Fit 10-15mm

Working Voltage 6V (4x AA Batteries)

Low Wattage Alarm Below 4.8V

Battery Life SpanSupport 10,000 Times of Locking &

Unlocking Operation

Working Temperature -20℃-70℃

Working Humidity 20%-90%

Data Capacity300 Users total for Fingerprint+ Password+

Card

Card Type MF1 Card

Distance to Sense Card <25mm

Fingerprint Sensor Biometric Sensor

Fingerprint False Reject Rate <0.01%

Fingerprint False Accept Rate <0.00003%

3

4. User Guidence4-1. How to enter the main menu

1 System Initialization

1.1 System Initializatio1)Long press the "Reset" button on the back panel for 5s, and the initialization is complete when "Clear Succeed" is displayed on the screen.

2 User Management

2.1 Enter Main menuPress any key to light up the screen→press "#"→Enter the administrator's fingerprint, password, card or remote control unit→Enter main menu

2.2 Add Administrator

Enter main menu→Press"1"→Press"1"→press"1"→Add administrator.①Add fingerprint: Press your same finger on the fingerprint reader 3 times according to the voice prompt;②Add password: Enter a password with at least 6 digits→Press "#"→Enter the same password again→Press "#";③Add card: Swipe a card on the card reader;④Add remote control unit(Opention)：Press any key on the remote control unit；

2.3 Add User

Enter main menu→press"1"→press"1"→press"2"→Add user.(The add operation is the same as 2.1)

2.4Delete Administrator

or User

Enter main menu→Press"1"→Press"2"→Delete administrator or user.①Delete fingerprint: Press the finger on the fingerprint reader to remove it's fingerprint;②Delete password: Enter the password that you want to delete→Press "#";③Delete card: Swipe the card that you want to delete on the card reader;④Delete remote control unit(Opention)：Press any key on the remote control unit that you want to delete；⑤Delete administrator or user:Enter the administrator or the user's number that you want to delete;

2.5 Clear All UserEnter main menu→press"1"→press"3"→Verify administrator by fingerprint,password,card or remote control unit→Clear succeed.

2.6 Read RecordEnter main menu→press"1"→press"4"→You can read unlock record here.

4

3 System Setting

3.1 Lock Mode

Enter main menu→Press"2"→Press"1"→press"1"→Set lock mode.①Auto lock: Press "1";②Manual lock: Press "2";

3.2 Unlock Keep TimeEnter main menu→Press"2"→Press"1"→press"2"→Input the unlock keep time(00-99s).

3.3 VolumeEnter main menu→Press"2"→press"2"→Turn volume.①Turn up: Press "1";②Turn down: Press "2";

3.4 RF DeviceEnter main menu→Press"2"→press"3"→RF Device.①Turn ON: Press "1";②Turn OFF: Press "2";

3.5 LanguageEnter main menu→Press"3"→Choose language.①Chinese: Press "1";②English: Press "2";

5

Packing List

Picture

Name Main Panel Striking Box User Manual Sticky SheetQuantity 1 1 1 2

Picture

NameRemote Controller

(Opention)Card Screw

Quantity 2 2 10

6

Guarantee

Customer Name————Purchasing Date————Product Name———— Model————Tel————

Remark：

1) Please keep this page, when claim guarantee, this page will be needed.2) 1 year guarantee is offered.3)The guarantee is valid for all customers, all countries.

7