SMART CYCLING HELMET1.0.0

RIDE CONNECTEDBlast your favorite tunes, talk over the intercom with your buddies, hear directions from your GPS and more, all through your Sena X1 Smart Cycling Helmet. With built-in Bluetooth® capabilities, HD speakers and a microphone using Advanced Noise Control™, technology has never felt so minimal or freeing.

Bluetooth® Integrated

Four-Way Intercom

Built-in Speakers and Mic

Music Sharing

Advanced Noise Control™

900-Meter Intercom

GETTING STARTED

1. This product comes with a Quick Start Guide, which is a basic version of the User’s Guide. A FULL VERSION OF THE USER’S GUIDE CAN BE DOWNLOADED AT SENA.COM/DOCUMENTS.

2. Update this product for free with the latest firmware to fully enjoy the new advanced features built into this product. Visit Sena.com/device-manager-download/ to see how to update your product.

3. Users can follow Sena on Facebook, YouTube and Instagram to receive the most up to date information on products, helpful tips and all other announcements regarding Sena products.

GETTING STARTED

SENA Technologies, Inc.Sena.comCustomer Support: support.sena.comE-mail: support@sena.com

GETTING STARTEDHow to Use This Guide The legend and callouts are here to help you read the illustrations. New technology can be confusing, but we’ve created a simple way to perform actions using illustrations.

Tap button the specifi ed number of times

Icon Legend

(+) Button (-) Button

Center Button

Buttons

Press and Hold button for the specifi ed amount of time

Audible prompt from the Bluetooth Module

Function = Button(s) to Tap or Hold

10sHOLD

= 1sHOLD

1xTAP

“Hello”

QUICK START GUIDE

QUICK START GUIDEHelmet Structure

Buckle

DC Power Charging & Firmware Upgrade Port

Retention System

Strap Adjuster

Bluetooth Communication Module

Answer/End Phone CallReject an Incoming Phone CallStart/End Intercom ConversationPlay/Pause MusicEnter Intercom Pairing ModeEnter Voice Confi guration Settings

Microphone

Speakers

(+) Button(-) Button

Center Button

Increase VolumeTrack ForwardScan Radio StationsSpeed Dial

Decrease VolumeTrack Back

FM Radio On/Off

Fault Reset Button

Blue/Red/Green LED Lights

QUICK START GUIDE

Answer/End Phone CallReject an Incoming Phone CallStart/End Intercom ConversationPlay/Pause MusicEnter Intercom Pairing ModeEnter Voice Confi guration Settings

Microphone

Speakers

(+) Button(-) Button

Center Button

Increase VolumeTrack ForwardScan Radio StationsSpeed Dial

Decrease VolumeTrack Back

FM Radio On/Off

Fault Reset Button

Blue/Red/Green LED Lights

QUICK START GUIDE

How to Fit the Helmet 1. Position the helmet on your head with the

front covering your forehead.

2. Position the strap adjuster centered, just below your ears.

3. Position the helmet low on your forehead with the buckle under the chin and back against the throat. The straps should fit comfortably around both ears.

Buckle Strap Adjuster

Chinstrap

O-Ring

QUICK START GUIDE

4. Adjust the chinstrap tension at the buckle so the chinstrap is tight and comfortable by pulling the chinstrap end through the buckle to either tighten or loosen as needed. Use the “O-Ring” to secure the excess strap.

Buckle Strap Adjuster

Chinstrap

O-Ring

Note: Check the chinstrap’s position and tension regularly to ensure proper fit.

5. Turn the retention system knob clockwise to tighten or counterclockwise to loosen.

Retention System Knob

Retention System

QUICK START GUIDE

6. To change the height of the retention system, firmly pull or push the retention system upward or downward to a different position.

Retention System Knob

Retention System

Basic OperationsPowering On Powering Off

= =

POWER ON

POWER OFF

1sHOLD

1xTAP

Volume Up Volume Down

= =

VOLUME UP

VOLUME DOWN

1xTAP

1xTAP

QUICK START GUIDE

Checking the Battery LevelThere are two ways to check the battery levels, visually using the LED lights, and audibly. Instructions are for when powering the Bluetooth Module on.

Visual Method Audible Method

= =

VISUALMETHOD

AUDIBLEMETHOD

1sHOLD

3sHOLD

=HIGH

=MED

=LOW

“Battery levelhigh/medium/low”

Mobile Phone Pairing Steps continued...

=

=

==

CONFIG. MENU

NAVIGATE FORWARD

1X

LED STATUS

PIN NUMBER

“Phone pairing”

“Confi guration menu”

Alternating blue and red fl ashing lights indicate device is now discoverable.

1xTAP

10sHOLD

Bluetooth Pairing (Phone, MP3, GPS)

QUICK START GUIDE

Answer a Call

End/Reject a Call

ANSWER

END/REJECT

= 1xTAP

= 2sHOLD

Make Call with Voice Dialer

VOICE DIAL

= 3sHOLD

Mobile Phone

Music ControlsPlay/Pause Next Track

Previous Track

= =

=

“[Beep, Beep]”

1sHOLD

1sHOLD

1sHOLD

QUICK START GUIDE

Intercom PairingUp to three people can communicate via intercom with the X1 Smart Cycling Helmet simply by pairing their headsets.

B

B

A

A

Pairing with Intercom BIntercom Pairing

and

or

D

= 5sHOLD

=

“Intercom pairing”

1xTAP

=

LED STATUS

Flashing blue LED confi rms intercoms are paired.

A

B

C

Note: Repeat the following steps to pair with Intercom Friends C & D.

QUICK START GUIDE

Two-Way Intercom

D

C

B

Start/End with Intercom Friend 1

Start/End with Intercom Friend 3

Start/End with Intercom Friend 2

Last-Come, First-Served

Intercom Friend 1

Intercom Friend 1

YOU

YOU

YOU Intercom Friend 1

Intercom Friend 2

Intercom Friend 2

Intercom Friend 3

A D

C

C

B

B

= 1xTAP

= 2xTAP

= 3xTAP

A B

A

Group IntercomStart Group Intercom End Group Intercom

END GROUP

INTERCOM

START GROUP

INTERCOM

= 1xTAP

=

LED STATUS

Green LED Flashing

“Group intercom” “Group intercom terminated”

= 1sHOLD

QUICK START GUIDE

RadioFM Radio On

FM Radio Off

=

=

1sHOLD

1sHOLD

“[Beep, Beep]”

“[Beep, Beep]”

Scan and Save Stations

START SCANNING

=

1xTAP

1sHOLD

STOP SCANNING

= 1sHOLD

SAVE STATION

=

“Preset (#)”

Seek and Save Stations

SEEK FORWARD

SEEK BACKWARD

=

=

ENTER PRESET MODE

= 3sHOLD

“Preset (#)”

CHOOSE PRESET #

= 1xTAP

1sHOLD

SAVE TO PRESET #

=

DELETE STATION

1sHOLD

=

2xTAP

2xTAP

QUICK START GUIDE

Navigating Preset Stations

= 1sHOLD

NAVIGATE FORWARD

Note: You can also use the Sena Device Manager or the Sena Smartphone App to save the preset stations.

Configuration MenuAccessing theConfi guration Menu

Enable/Disable or Execute Menu Options

Navigating Between Menu Options

ENABLE/DISABLE

=

=

10sHOLD

“Confi guration menu” “[Menu prompt]”

“[Menu prompt]”

NAVIGATE FORWARD

CONFIG. MENU

NAVIGATE BACKWARD

= 1xTAP

= 1xTAP

1xTAP

EXECUTE

QUICK START GUIDE

Sena Device ManagerThe Sena Device Manager allows you to upgrade the Bluetooth Communication Module’s firmware and configure its settings directly from your PC or Apple computer. Using this software, you can assign speed dial presets, FM radio station presets and more. For more information on downloading the Sena Device Manager, please visit Sena.com.

Sena Smartphone AppThe Sena Smartphone App allows you to configure the Bluetooth Communication Module’s settings, as well as access the User’s and Quick Start Guides. To do so, pair your mobile phone with the Bluetooth Communication Module by following the instructions in the “Bluetooth Pairing (Phone, MP3, GPS)” section in this quick start guide. Run the Sena Smartphone App and configure the settings directly from your smartphone. You can download the Sena Smartphone App for Android and Apple operating systems from Sena.com/headset-app.

QUICK START GUIDE

TroubleshootingFactory Reset Fault Reset

= =10sHOLD

1xTAP

“Confi guration menu”

“Factory reset”

NAVIGATE BACKWARD

2X

= 2xTAP

= 1xTAP

EXECUTE

QUICK START GUIDE

Note: Fault Reset will not restore the Bluetooth module to factory default settings.

QUICK REFERENCE

TYPE OPERATION BUTTON COMMANDS

Basic

Operations

Power on/off 1sHOLD

Volume up/ Volume down

1xTAP

1xTAP

Mobile Phone

Answer phone call 1xTAP

End/reject phone call

2sHOLD

Voice dial

3sHOLD

Speed dial

3sHOLD

Music

Play/Pause music

1sHOLD

Track forward

1sHOLD

Track back

1sHOLD

QUICK REFERENCE

TYPE OPERATION BUTTON COMMANDS

Intercom

Intercom pairing

5sHOLD

1xTAP

Start/end each intercom

1xTAP

End all intercoms

1sHOLD

Start group intercom

1xTAP

End group intercom

1sHOLD

FM Radio

FM radio on/off

1sHOLD

Select preset

1sHOLD

Seek stations forward

2xTAP

Seek stations backward

2xTAP

Scan up FM band/stop scanning

1sHOLD

Save preset while scanning

1xTAP