Smaller Simpler Better Compact Circuit Protector the protection in 1/3 the space.
-
Upload
edwin-flowers -
Category
Documents
-
view
218 -
download
3
Transcript of Smaller Simpler Better Compact Circuit Protector the protection in 1/3 the space.
Smaller
Simpler
Better
Compact Circuit Protector
the protection in 1/3 the
space
Product Description
Feature-rich solution!
Indication Light
Easy troubleshooting tool to help find the opened fuse quickly
Easy to Turn-lid
No fuse-puller required to install or extract a fuse
IEC Marked Line and Load Terminal
For global acceptance
35mm DIN Rail Mount
For quick, snap-on installation
Lock-out/Tag-out
Meets requirements for maintenance safety procedures
Disconnect Switch
For load isolation
Backed out Line and Load Terminals
Saves installation time.
Compact Circuit Protector
CCP is 1/3 the space of equivalent UL489 circuit breakersCCP is 2/3 the space of traditional fusible disconnects
Value - Smaller
Small = Value for the OEM customer
Footprint comparison
MCCB Size reduction: 69.7%
Fusible Sw Size reduction: 42.3%
Source Eaton FDXXX
Source ABB CFDXXX
CC
P
Fu
sib
le
Dis
con
nec
t
MC
CB
Value - Smaller
Small = Value for the OEM customer
Relative size comparison with Circuit Breakers
UL1077 Supplementary
Protector
Cooper Bussmann
CCP
UL 489
Circuit Breaker
UL 489
Circuit Breaker
UL 489
Circuit Breaker
Value - Smaller
Small = Value for the OEM customer
UL98 Listed Class CC fusible disconnect with
Class CC fuses
Cooper Bussmann UL98 Listed Class CC
Compact Circuit Protector with Class
CC fuses
UL508 Listed Disconnect (Manual Motor) with Class
CC fuses
UL512 Listed Class CC Fuse Holder with Class CC Fuses and UL508 Listed Disconnect
Value - Simpler
Fully integrated fuse and switch
Clearly marked Line and Load side terminals
Terminal screws are backed out at factory
DIN rail mount standard
INSTALL
Fully integrated fuse and switch
Clearly marked Line and Load side terminals
Terminal screws are backed out at factory
DIN rail mount standard
INSTALL
Line and Load Terminals
DIN rail mount
Local fuse indication built-in (light)
Remote fuse indication accessory (PLC)
Switch-status accessory (NO+NC contacts)
Easy to operate fuse switch
USE
Local fuse indication built-in (light)
Remote fuse indication accessory (PLC)
Switch-status accessory (NO+NC contacts)
Easy to operate fuse switch
USE
Local Indication
Fuse Switch
NO+NC Aux Contacts
Promotes higher SCCR
Full Voltage Rating
Global standards = global acceptance
DESIGN
Promotes higher SCCR
Full Voltage Rating
Global standards = global acceptance
DESIGN
Value - Better
Unmatched performance in electrical protection
MMP MCB MCCB
480/277 120/208 480/277
Standard A/C Voltage Ratings
CCP is full
600v rated
MMP MCB MCCB
65kA 14kA 18kA
Standard Interrupting Ratings
CCP is rated 200kAIC
Product Profile
Three basic models
Applications:Motor Circuits
Control circuits
Heating and lighting
30A/ 600vAC 200kAIC rating Accepts Class CC only UL98 Horsepower Rated
Applications: Global Acceptance
32A/ 600vAC Suitable for Global
applications Accepts IEC 10x38, 32A
Am, 25A Gg or Class CC IEC 60947-3 AC23A UL 508
Applications: Control Circuits
80vDC Blue handle clearly
identifies DC circuit Available in two skus: CC
and 10x28 models to support global installations
Compact Circuit ProtectorCatalog number:
CCP-1-30CC (1-Pole),
CCP-2-30CC (2-Pole),
CCP-3-30CC (3-Pole)
Catalog number:
CCP-1-30M (1-Pole),
CCP-2-30M (2-Pole),
CCP-3-30M (3-Pole)
Catalog number:
CCP-1-DCC (Class CC fuse, 1-pole)
CCP-1-DCM (Midget fuse, 1-pole)
*CCC (China) Listing Under Investigation
Product Profile
Listed to UL, CSA and IEC standards
Agency Listings
Package size: 17.5mm [.689in] wide / Compliant to DIN 43 880
Maximum operating voltage and listings:
600Vac / 80Vdc UL98 Listed for class CC fuse.
600Vac / 80Vdc UL508 recognized, IEC 60947-3 AC23A for 10x38 IEC and Midget fuse.
Switch rating: 32A IEC 60947-3 AC-23A / 30A UL98 & CSA22.2 #4
Horse Power rating: 7.5Hp@600V, 5Hp@480V, 3Hp@ 240V, 2Hp@200V w/CC fuse
SCCR: 200kA UL class CC
Frequency: 50-60Hz
Wire Range: 18-6AWG 75C CU only solid and stranded single and dual
4AWG single
24vDC remote indication
Product ProfileAccessory: Remote Fuse Indication
Pre-Wired Phase Monitoring Conductors
Includes spade terminals to connect to CCPTwo Indication LEDs
Green LED indicates unit power
Red LED indicates Open Fuse
Signal Connections to Monitor/ Control
Includes 0 .110” quick connects for power, signal and ground connections.
Switch
Connects to CCP
Disconnect Switch
Catalog number:
CCP-PLC-IND
24vDC remote indication
Product ProfileAccessory: Remote Fuse Indication
Phase monitoring conductor dedicated wiring terminal
Remote Fuse Indication Accessory Installation to CCP
• Mounts on left side of CCP
• Necessary hardware is provided.
• Dimensionally Compliant to DIN-43880
• Dedicated terminal on the CCP to accept the conductor.
• For 1-pole or 2-pole CCP connection, trim unused conductors from the device.
Wiring to CCP
Product ProfileAccessory: Auxiliary Contact for Switch Status
Auxiliary Contacts
One NO+NC Contact for Switch Status
Contact Rating
5A/240vAC
Switch
Connects to CCP
Disconnect Switch
Indication of CCP switch position for interlocking
Catalog number:
CCP-AUX
Product ProfileAccessory: Auxiliary Contact for Switch Status
Easy to install accessory
Auxiliary Contact for Switch Status Accessory Installation to CCP
• Mounts on right side of CCP
• Mechanically interlocks with the CCP switch handle with hardware provided..
• Dimensionally Compliant to DIN-43880
Comprehensive volume of application knowledge
Challenge!Tools for Selling
Application Note
Challenge!Tools for Selling: Application Note
Best fused solution!
Challenge!Tools for Selling: Application Note
Better ratings than circuit breakers
Challenge!Tools for Selling: Application Note
Higher ratings achieved in control circuits
Control Circuit
Applications
Challenge!Tools for Selling: Application Note
Higher ratings achieved at competitive cost
Resistive and
Lighting
Circuit
Applications
Challenge!Tools for Selling: Application Note
Better ratings for motor circuit applications
Motor Circuit
Applications
New category designed to help you Save space Increase SCCR ratings Improve safety Reduce downtime
Thank You
Summary