SLS - Selective Laser Sintering Rapid Prototyping Carnegie Mellon Andy Sadhwani.
-
Upload
percival-booker -
Category
Documents
-
view
214 -
download
2
Transcript of SLS - Selective Laser Sintering Rapid Prototyping Carnegie Mellon Andy Sadhwani.
![Page 1: SLS - Selective Laser Sintering Rapid Prototyping Carnegie Mellon Andy Sadhwani.](https://reader035.fdocuments.us/reader035/viewer/2022072006/56649d045503460f949d7553/html5/thumbnails/1.jpg)
SLS - Selective Laser Sintering
Rapid Prototyping
Carnegie Mellon
Andy Sadhwani
![Page 2: SLS - Selective Laser Sintering Rapid Prototyping Carnegie Mellon Andy Sadhwani.](https://reader035.fdocuments.us/reader035/viewer/2022072006/56649d045503460f949d7553/html5/thumbnails/2.jpg)
Selective Laser Sintering (SLS)
Manufacturing Technique Made with Plastic/Elastomer Powder Sample built layer by layer Horizontal Slide with Fixed Vertical Movement Powder stays on table Filetype ‘.stl’ used - structural triangle language Finished sample cools for 12-24 hrs then pulled
out of Powder
![Page 3: SLS - Selective Laser Sintering Rapid Prototyping Carnegie Mellon Andy Sadhwani.](https://reader035.fdocuments.us/reader035/viewer/2022072006/56649d045503460f949d7553/html5/thumbnails/3.jpg)
SLS Machine
![Page 4: SLS - Selective Laser Sintering Rapid Prototyping Carnegie Mellon Andy Sadhwani.](https://reader035.fdocuments.us/reader035/viewer/2022072006/56649d045503460f949d7553/html5/thumbnails/4.jpg)
SLS Powder
![Page 5: SLS - Selective Laser Sintering Rapid Prototyping Carnegie Mellon Andy Sadhwani.](https://reader035.fdocuments.us/reader035/viewer/2022072006/56649d045503460f949d7553/html5/thumbnails/5.jpg)
SLS con’t
Powder– Nylon-11
For High Strength and Elasticity
– Nylon-11 with 50% Glass Reinforcement– Nylon-12
Finer Surface Quality but lower elasticity
– Elastomer Simulate Rubber-Like Products
– Strain and Tolerances Available on Website
![Page 6: SLS - Selective Laser Sintering Rapid Prototyping Carnegie Mellon Andy Sadhwani.](https://reader035.fdocuments.us/reader035/viewer/2022072006/56649d045503460f949d7553/html5/thumbnails/6.jpg)
SLS con’t
No Limitation to Maximum Size– Sintered Parts can be Glued Together Easily
Providing High Strength– Single Part can be 30cm x 30cm x 60cm
Minimum Wall Thickness 0.85 [mm] for PA11
1.00 [mm] for PA11-GF50
0.65 [mm] for PA12
0.60 [mm] for Elastomer
![Page 7: SLS - Selective Laser Sintering Rapid Prototyping Carnegie Mellon Andy Sadhwani.](https://reader035.fdocuments.us/reader035/viewer/2022072006/56649d045503460f949d7553/html5/thumbnails/7.jpg)
Example of SLS Part (Drill)
![Page 8: SLS - Selective Laser Sintering Rapid Prototyping Carnegie Mellon Andy Sadhwani.](https://reader035.fdocuments.us/reader035/viewer/2022072006/56649d045503460f949d7553/html5/thumbnails/8.jpg)
Contact Information
Mareco bv Rijnaakkade www.marco.nl
Quotes Available through Email– Price Dependent on:
Height, Finishing, File Type
– Quote Available in One Day– 1 Week to Manufacture Part