SLITINY TITANU

LockheedSR-71 Blackbird

Ti-6Al-4V Ti-6Al-2Sn-4Zr-6Mo Ti-5,8Al-4Sn-3,5Zr-0,7Nb-0,5Mo-0,35Si-0,06C

Steels Nickel-Base Alloys

Titanium

Titanium Aluminide

AluminumMagnesium

Application Temperature [ °C ]

Den

sity

[ g/c

m3

]

In the Lockheed-Martin F-22 ‘Raptor’ Advanced Tactical Fighter, 42% of the structural weight consists of titanium.

The Materials Information Society, Introduction to Selection of Titanium Alloys, ASM International, 2002

The Ultra-light weight Field Howitzer, designated M777A1 in the USA was selected in 1997 by a joint US Army/Marine Corps initiative to replace the existing inventory of M198 155mm towed howitzers. The constructionof the M777A1 makes extensive use of titanium and titanium castings, enabling a weight reduction of 3,175kg compared to the M198 howitzer which it replaces in the US Army and USMC inventory.

William A. Gooch. The Design and Application of Titanium Alloys to U.S. Army Platforms -2010. TITANIUM 2010, International

Titanium Association

ODLITKY TĚLNÍCH NÁHRAD

MILAN T. JOVANOVIĆ. PROCESSING AND SOME APPLICATIONS OF NICKEL, COBALT AND TITANIUM-BASED ALLOYS.METALURGIJA - JOURNAL OF METALLURGY

Strength-to-density ratio of some alloys for medical application.

Application of Titanium in Bugatti Veyron: 1) meshed metal baffle, Titanium grade 2, 2) bolts of suspension, Ti-6Al-4V, 3) bolts and inserts, Ti-6Al-4V, 4) engine: connecting rods, Ti-6Al-4V, 5) heat shielding sheets, Titaniumgrade 2, 6) exhausting system, Titanium grade 1, 7) heat shielding sheets for brake, Ti-6Al-4V, 8) brake bells, Ti-6Al-4V, 9) crash clamps, Ti-6Al-4V, 10) suspension springs, Beta-Titanium alloy LCB

D. Helm, O. Roder. Recent Titanium Research and Development in Germany.

Krollův proces výroby titanové houby

Výroba ingotů ze slitin titanu

SLITINY NA BÁZITUHÝCH ROZTOKŮ

Krystalové mřížky titanu: a) šesterečnáb) krychlová prostorově středěná

SLITINY NA BÁZITUHÝCH ROZTOKŮ

882 °C

Al, SnTi-5Al-2,5Sn

V, Nb, MoTi-10V-2Fe-3Al

α

β

α + β : Ti-6Al-4V

Krystalová struktura aluminidů titanu: a) hexagonální aluminidu Ti3Al,b) tetragonální aluminidu TiAl

SLITINY NA BÁZIINTERMETALICKÝCHSLOUČENIN

Schematic of a modern 50 kg vacuum arc skull melting and casting furnace. 1, fast retraction system; 2, power cables; 3, electrode feeder ram; 4, power supplies; 5, consumable electrode; 6, skull crucible; 7, tundish shield; 8, mold arrangement; 9, centrifugal casting system; 10, chamber lid carriage

Schematic of a modern semicontinuously operating vacuum arc skull melter for charge weights of up to 1000 kg. 1, fast retraction system; 2, power cables; 3, power supplies; 4, electrode feeder ram; 5, consumableelectrode; 6, skull crucible; 7, crucible carriage; 8, tundish shield; 9, mold arrangement; 10, vacuum pumpingsystem; 11, centrifugal casting system

4

5

Vakuová oblouková pec pro odlévání odlitků ze slitin titanu

Charakteristika jednotlivých typů forem pro odlévání odlitků ze slitin titanu

3,2 - 6,311 000 x 200 x 400

60Keramická skořepina

12,55φ 500 x 300200Specielní pískováforma

12,55φ 1 000 x 450100Obráběná grafitováforma

Drsnostpovrchu [μm]

Min. tloušťka

stěny [mm]

Max. velikostodlitku [mm]

Max. hmotnost

odlitku [kg]Technologie

Odlitky ze slitin titanu odlévané do grafitových forem

a) ZrO2-Y2O3 ceramic mould, b) ZrO2-CaO ceramic mould and c) Y2O3 ceramic mould.

Teresa P. Duarte. Optimization of Ceramic Shells for Contact with Reactive Alloys. Materials Science Forum, Vols. 587-588 (2008) pp 157-161

TiAl6V4

302025

15810

790583760

840610790

VýkovekOdlitekOdlitek + HIP

TiAl5Sn2,5

301210

1056

850635827

930690896

VýkovekOdlitekOdlitek + HIP

TiAl6V4

3015379448Odlitek + HIPTi

Z [%]A [%]Rp0,2[MPa]

Rm[MPa]ZpracováníSlitina

Mechanické vlastnosti slitin titanu

Vliv legur na strukturu slitin Ti-Al

ALUMINIDY TITANU

Toshimitsu Tetsui. Development of a TiAl turbocharger for passenger vehicles. Materials Science and Engineering A329–331 (2002) 582–588

Lancer Evolution VI automobile and TD05 turbocharger

Comparison of response ability of a TiAl turbocharger and an Inconel 713C turbocharger.

Toshimitsu Tetsui. Development of a TiAl turbocharger for passenger vehicles. Materials Science and Engineering A329–331 (2002) 582–588

Cast g-TiAl exhaust valves in testing for high-performance cars in US and in Europe.

Edward A. Loria. Quo vadis gamma titanium aluminide. Intermetallics 9 (2001) 997–1001.

Matthias Blum. Prototype plant for the economical mass production of TiAl-valves. Materials Science and Engineering A329–331 (2002) 616–620.

TiAl low-pressure turbine blade ready for delivery and its corresponding porosity free x-ray picture.

J. Aguilar et al. Investment casting technology for production of TiAl low pressure turbine blades - Process engineering andparameter analysis. Intermetallics 19 (2011) 757-761

Edward A. Loria. Quo vadis gamma titanium aluminide. Intermetallics 9 (2001) 997–1001.

Investment cast g-TiAl diffuser for demonstrator aircraft engine