SlimcapSlimcapSlimcapSlimcap Technical Specification v1.0

CONCRETE WEIGHBRIDGES

RADICALLY REMOVED IN OUR SLIMCAP

WEIGHBRIDGE WITH MODULAR COMPONENTS IN

PRECOMPRESSED REINFORCED CONCRETE

Pag. 2/7

Description and General Specification

Execution fully electronic, low-

profile modular construction.

Slimcap can be installed in a

low pit or at ground level -

overall dimensions 48 cm

approx.

Platform consisting of

prefabricated modular

elements in pre-stressed

reinforced concrete (Rck 50

N/mmq).

Laser-cut steel connecting

heads (Fe B44k), complete

with

inspection holes.

designed for long life and

consistent

performance and to bring

down costs for owner

operators.

Steel bases with oscillation

limiting devices.

Stainless steel or galvanised

nuts and bolts.

Load cells of omologated

compression and certified

OIML R60. Made of stainless

steel, sealed construction,

IP68 degree of protection C4.

Triple safety against lightning

and overvoltage consisting of

upstream and downstream

insulation barriers, copper

plait “By Pass” and earthing

connections - limiting devices

to regulate the platform’s

oscillation width, complete

with safety struts.

The weighbridge Slimcap is

modular and can then be

further amended in its length

and scope at a reasonable

price.

The project provides a

concrete mixer with automatic

dosing and less than 4

different types of aggregates

with particle size to ensure the

highest quality of product.

Undergo a preanufactured

goods are all aging and

subsequently transferred to

our facility for the final outdoor

aging for at least 30/40 days.

They’re then individually tested

form and finished for

maximum certainty of the

perfect fit on site.

Dimension

See chart overleaf

Approvals

All data relating to the

performance of the machine

meets and exceeds

requirements of EN45501

European Approval Accuracy

Class III machines.

Load cells:

OIML R60

C4

Environment

Load cell:

Operating temperature: -10°C to +65°C

Storage temperature: -20°C to +70°C

Resistance to Dirt & Moisture IP68

Pag. 3/7

Options

1.

WF wireless transmission to

indicator. Our constant research for the solution

of our customer problems has brought

us to achieve WF, the innovative

wireless weight system which allow you

to connect any weighing platform and

weigh bridges any kind and dimension,

to the weighing indicator or to a PC,

without the wiring cables.

Confort, versatility, easy to install and

moving are the maximum with WF.

The transmission system consisting of

two transceiver RF which can realize a

wireless bi-directional communication.

The maximum RX/TX range, if the

antennas are in LOS, can reach a

maximum of 40 meters. With a directional antenna you can

reach until 350 meters. It’ a Trade Approved system.

2.

Sun System. Sun System is able to power any

weighing systems; it make

independent them from the 220Vac

mains.

Sun System consist of a photovoltaic

panel, two Pb batteries and a regulator

board.

The latter has these functions: check

the battery charge and avoid that their

voltage drops below 11 volts.

3.

ATEX Certification. For each load cell.

4.

PIT frame. Dimensions:

7.7x3 m

9 x 3 m

15 x 3 m

18 x 3 m

22 x 3 m

Picture 1 SunSystem + WF

Pag. 4/7

Pictur2 Dimensions and capacities

Picture 8 Pit mounted 18 m Slimcap

Pag. 5/7

Picture 9 Floor mounted 18 m Slimcap Picture 10 Pit mounted 9 m Slimcap

Pag. 6/7

Picture3 Panels transport Picture4 Panel lifting

Picture5 Swinging control Picture6 Load cell housing Picture7 Head/Pannel support

Pag. 7/7

Your local distributor:

This brochure contains a generalguide only of the product and shall not form part of any contract unless specifically agreed by Cogo Bilance Srl in writing each case of the Order Acknologement.

The specification of the products decribed herein may vary from time to time may be altered without notice.

Stabilimento di Camponogara Via dell’Industria, 51 30010 Camponogara (VE) Tel. 041.5380888 Fax 041.922862 info@cogobilance.it

Stabilimento di Oggiona Via Risorgimento n. 3 21040 Oggiona con S. Stefano (VA) Tel. 0331.212312 Fax 0331.219778 segreteria@cogobilance.it

Filiale di Alessandria Via Torino, 14 15100 Alessandria (AL) Tel. 393.9951107