Sliding hardware systems for glass/metal and wood HAWA-Junior · Screw-on rubber door stop 1 10629...
Transcript of Sliding hardware systems for glass/metal and wood HAWA-Junior · Screw-on rubber door stop 1 10629...
Sliding hardware systems for glass/metal and wood
HAWA-Junior
Program
ExtensionProgram
Extension
2005
Page 8-11 Page 8/14/19/22/23 Page 25 Page 26-27 Page 28-29
Page 23
Page 22
Page 24
Page 4-11
Page 12-17
Page 18-21
Festverglasung LaufschieneEdelstahl-Effekt
LaufschieneEdelstahl-Effekt
Fixed glassNo glass cut-outs or
visible hardware parts
WinkelprofilAbdeckkappen
Edelstahl-Effekt
Anthrazit
WinkelprofilAbdeckkappen
Edelstahl-Effekt
Anthrazit
HAWA-Adapto 80-120 HAWA-Toplockrund / eckig
HAWA-Toplockrund / eckig
HAWA-Toplockrund / eckig
HAWA-Toplockrund / eckig
HAWA-Junior 80/G
HAWA-Junior 120/G
HAWA-Junior 40/B
HAWA-Junior 80/B
HAWA-Junior 120/B
HAWA-Junior 40/GL
HAWA-Junior 80/GL
HAWA-Junior 40/GP
HAWA-Junior 80/GP
HAWA-Junior 120/GP
Stainless steel effectTop track, aluminium,
stainless steel effect, brushed
All-glass sliding doors up to 40 kg(88 lbs.) linear and discreet
All-glass sliding doors up to 80 kg(176 lbs.) linear and discreet
Stainless steel effectAngle profile, aluminium,
stainless steel effect, brushed
HAWA-ToplockLock with round andangular cover caps
HAWA-Adapto 80-120System can be set in concrete
for ceiling-flusch sliding
HAWA-JuniorSliding hardware systems
Program extension2005
NEW
NEW
Page 30Page 30
Wall connection profileStainless steel effect, with
centering assembly
HAWA-SoundExPrevents transfer of
structure-bound noise
HAWA-Junior sliding hardware systems
From a single trolley to a comprehensive solution
The HAWA-Junior sliding hardware systemcan look back over a twenty-year career,during which it has become a constant in itsown right. Millionfold in use throughout theworld, this quiet and reliable system effort-lessly moves sliding doors made of glass,metal and wood. Now in its prime, it is assought-after today as ever before. After all,what started off as a sliding bearing is nowa range of systems and accessories with adiverse variety of applications. As a result,space-saving architectural ideas, as discreetas they are elegant, can become reality.
HAWA-Junior sliding hardware systems areconstantly undergoing further development,including product improvement, additionalaccessories and design adaptation.
This special publication contains a concen-trated overview of the program extensionsto our sliding hardware solutions for- glass and metal- woodand includes detailed information.
Combine new ideas with proven tech-nology and success will be yours!
Our range still includes proven slidinghardware systems for glass/metal
- HAWA-Junior 160/GP- HAWA-Junior 40-80/GS- HAWA-Junior 160/G- HAWA-Junior 80-120-160/GV- HAWA-Junior 80-120-160/M
and for wood
- HAWA-Junior 40-80/Z- HAWA-Junior 120/A- HAWA-Junior 160/A+B
Please see the current HAWA catalogues.
2 3
Hardware system with patch suspension forelegant all-glass sliding doors weighing up to40, 80, 120 and 160 kg (88, 176, 264 and352 lbs.), with glass thicknesses (ESG) of 8 ( 5
16"),10 (25
64 ") and 12 mm (1532") [12.7 mm (1
2")].
H A W A
4 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78
Junior 40-80-120-160/GP Patents
HAWA-Junior 40/GP HAWA-Junior 80/GP
HAWA-Junior 120/GP
Side-fixing up to 120 kg (264 lbs.)see page 25
HAWA-Junior 160/GP
D e s c r i p t i o nThe HAWA-Junior 40-80-120-160/GP is an attractive addition to thehighly successful HAWA-Junior family. With its clever glass attachmentand guide mechanism, this sophisticated hardware system opens upnew dimensions in the field of transparent room design for architectsand planners. It is remarkably simple to install: the suspension is fittedfrom the interior, thus providing protection against break-ins, and thecountersunk suspension bolt permits an especially low installation height.It is also extremely simple to adjust the position of the glass slidingdoor as the vertical adjustment can be carried out from the interior.
F e a t u r e s o f t h e H A W A - J u n i o r 4 0 - 8 0 - 1 2 0 - 1 6 0 / G P• Trolley hanger, sleeve bearing mounted, high-grade polyamide
tandem rollers• Smooth and quiet operation• Track stop with adjustable retainer• Vertical adjustment without removing the glass door• Low installation height• Cover in different colours• Special floor guide, screw mounting, rattle proof, for glass sliding doors• Simple installation• Further profiles allow stationary glass to be fitted without the hard-
ware being visible
Inset profile systemHAWA-Adapto 80-120
see page 26
F l o o r - g u i d e t y p e
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78 5
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
Junior 40-80-120-160/GP Patents
E x a m p l e s o f a p p l i c a t i o n
Bottom door stop up to 120 kg(264 lbs.) see catalogue glass/metal
H A W A
6 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78
Junior 40-80-120-160/GP Patents
HAWA-Junior 40/GP, partial set for single door, without top track
code
HAWA-Junior 40/GP, partial set for single door 16014
For two-panel sliding doors please order two sets for single doors.
Partial set comprising
pieces code
Trolley hanger, M8, sleeve bearingmounted, high-grade polyamidetandem rollers
2 10420
Suspension bolt M8 and mountingscrews 2 16017
Patch suspension with glass holderinsert, set of 1 piece 2 16033
Track stop with progressivelyadjustable retention spring catch 2 10640
Single use drilling jig 1 15992
Screw-on rubber door stop 1 10629
Vertical adjustment pin 1 16329
HAWA-Junior 160/GP, partial set for single door, without top track
code
HAWA-Junior 160/GP, partial set for single door 19606
For two-panel sliding doors please order two sets for single doors.
Partial set comprising
pieces code
Trolley hanger, M14, sleeve bearingmounted, high-grade polyamidetandem rollers
2 10416
Suspension bolt M14 and mountingscrews 2 19605
Patch suspension with glass holderinsert, set of 1 piece 2 16033
Track stop with progressivelyadjustable retention spring catch 2 10639
Single use drilling jig 1 15992
Screw-on rubber door stop 1 10629
Vertical adjustment pin 1 16329
HAWA-Junior 120/GP, partial set for single door, without top track
code
HAWA-Junior 120/GP, partial set for single door 16016
For two-panel sliding doors please order two sets for single doors.
Partial set comprising
pieces code
Trolley hanger, M12, sleeve bearingmounted, high-grade polyamidetandem rollers
2 14857
Suspension bolt M12 and mountingscrews 2 16019
Patch suspension with glass holderinsert, set of 1 piece 2 16033
Track stop with progressivelyadjustable retention spring catch 2 14858
Single use drilling jig 1 15992
Screw-on rubber door stop 1 10629
Vertical adjustment pin 1 16329
HAWA-Junior 80/GP, partial set for single door, without top track
code
HAWA-Junior 80/GP, partial set for single door 16015
For two-panel sliding doors please order two sets for single doors.
Partial set comprising
pieces code
Trolley hanger, M10, sleeve bearingmounted, high-grade polyamidetandem rollers
2 10407
Suspension bolt M10 and mountingscrews 2 16018
Patch suspension with glass holderinsert, set of 1 piece 2 16033
Track stop with progressivelyadjustable retention spring catch 2 10628
Single use drilling jig 1 15992
Screw-on rubber door stop 1 10629
Vertical adjustment pin 1 16329
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78 7
H A W A Junior 40-80-120-160/GP Patents
Floor-mounted guides / Bottom door stop
code
Floor guide, screw mounting, rattle proof,plastic, complete, for 8/10/12 (12.7) mm( 5
16 " / 2564" /
1532")(
12") glass, dull chromium finish
16029
Distance plate to bottom guide 16657
Self-adhesive sliders 8 mm ( 516 ") glass 16192
Self-adhesive sliders 10 mm (2564") glass 16193
Patch suspension with glass holder insert,set of 1 piece, suitable for guide slider 16033
Sprung bottom guide for point fixing 19118
Guide slider, rattle proof, plastic,with mounting screws,suitable for patch suspension
16020
Bottom door stop, dull chromium finish[for panel weight up to 120 kg (264 lbs.)] 17782
Bottom guide channels
Caution: Hole positions vary. mm/inch code
Bottom guide channel,alu plain anodized,predrilled,20 x 20 x 3 mm(25
32" x2532" x
18 ")
6000 (19'8 732") 14414
cut to size 14415
Bottom guide channel,alu plain anodized,undrilled
6000 (19'8 732") 15405
cut to size 15554
Stop bumper 15636
Single bottom guidechannel, alu plainanodized
2500 (8'2 716 ") 19348
3500 (11'5 1316 ") 19349
6000 (19'8 732") 18956
cut to size 19350
Set of fixing parts for single bottom guidechannel 18956, 5 pieces(2 pieces per metre)
19162
Accessory
code
Multi use drilling jig with drilling bush 15916
G l a s s c u t o u t s f o r s l i d i n g d o o rOnly toughened safety glass (ESG) may be used.
Cover plates
code
Rounded cover plate,plastic,dull chromium finish
1 piece 16049
4-pieces set 16042
Rounded cover plate,plastic,polished chromium finish
1 piece 17161
4-pieces set 17160
Rounded cover plate,plastic,brass polished
1 piece 16050
4-pieces set 16043
Rounded cover plate,plastic,stainless-steel effect
1 piece 16051
4-pieces set 16044
Rounded cover plate,plastic,raw
1 piece 15823
Square cover plates,plastic,dull chromium finish
1 piece 19091
4-pieces set 19092
Square cover plates,plastic,stainless-steel effect
1 piece 19093
4-pieces set 19094
Square cover plate,plastic,raw
1 piece 19000
H A W A
8 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78
Junior 40-80-120-160/GP Patents
Top tracks to HAWA-Junior 40/GP
Caution: - Hole positions vary- Minor differences in colour are possible mm/inch code
Top track, alu plainanodized, predrille
1400 (4'7 18 ") 10213
1600 (5'3") 10214
1800 (5'10 78 ") 10215
2000 (6'6 34") 10216
3000 (9'10 18 ") 18530
4000 (13'1 12") 18531
6000 (19'8 732") 10211
cut to size 10217
Top track, alu stainless steeleffect, brushed, predrilled
4000 (13'1 12") 20002
6000 (19'8 732") 20001
cut to size 20003
Top tracks to HAWA-Junior 80/GP
Caution: - Hole positions vary- Minor differences in colour are possible mm/inch code
Top track, alu plainanodized, predrilled
1400 (4'7 18 ") 10189
1600 (5'3") 10190
1800 (5'10 78 ") 10191
2000 (6'6 34") 10192
2200 (7'2 58 ") 10193
2500 (8'2 716 ") 10194
3000 (9'10 18 ") 18532
4000 (13'1 12") 18533
6000 (19'8 732") 10186
cut to size 10188
Top track, alu stainless steeleffect, brushed, predrilled
4000 (13'1 12") 20005
6000 (19'8 732") 20004
cut to size 20006
Top track sets to HAWA-Junior 40 with fixed glass
Caution: Hole positions vary. mm code
Top track set with fixed glassto HAWA-Junior 40,alu plain anodized, predrilled
2000 (6'6 34") 20224
6000 (19'8 732") 20225
Partial set comprising
Caution: Hole positions vary. mm
2022
4
2022
5
code
Top track with fixedglass, alu plain an-odized, predrilled
2000 (6'6 34") 1 – 20101
6000 (19'8 732") – 1 20102
Cover profile to toptrack with fixed glass,plain anodized
1250 (4'1 732") 1 – 19552
3000 (9'10 18 ") – 1 19562
Top track sets to HAWA-Junior 80 with fixed glass
Caution: Hole positions vary. mm code
Top track set with fixed glassto HAWA-Junior 80,alu plain anodized, predrilled
2500 (8'2 716 ") 20226
4000 (13'1 12") 20227
6000 (19'8 732") 20228
Partial set comprising
Caution: Hole positions vary. mm
2022
620
227
2022
8
code
Top track withfixed glass, aluplain anodized,predrilled
2500 (8'2 716 ") 1 – – 20104
4000 (13'1 12") – 1 – 20105
6000 (19'8 732") – – 1 20106
Cover profile totop track withfixed glass, plainanodized
1250 (4'1 732") 1 – – 19552
2000 (6'6 34") – 1 – 19553
3000 (9'10 18 ") – – 1 19562
Top tracks to HAWA-Junior 120/GP
Caution: Hole positions vary. mm/inch code
Top track, alu plainanodized, predrilled
2500 (8'2 716 ") 14866
3000 (9'10 18 ") 14867
4000 (13'1 12") 14868
6000 (19'8 732") 14869
cut to size 14871
Top track sets to HAWA-Junior 120 with fixed glass
Caution: Hole positions vary. mm code
Top track set with fixed glassto HAWA-Junior 120,alu plain anodized, predrilled
3000 (9'10 18 ") 20229
4000 (13'1 12") 20230
6000 (19'8 732") 20231
Partial set comprising
Caution: Hole positions vary. mm
2022
920
230
2023
1
code
Top track withfixed glass, aluplain anodized,predrilled
3000 (9'10 18 ") 1 – – 20235
4000 (13'1 12") – 1 – 20054
6000 (19'8 732") – – 1 20055
Cover profile totop track withfixed glass, plainanodized
2000 (6'6 34") 1 1 – 19553
3000 (9'10 18 ") – – 1 19562
Top tracks to HAWA-Junior 160/GP
Caution: Hole positions vary. mm/inche code
Top track, alu plainanodized, predrilled
3000 (9'10 18 ") 10205
4000 (13'1 12") 10206
5000 (16'4 2732") 10208
6000 (19'8 732") 10203
cut to size 10207
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78 9
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
Junior 40-80-120-160/GP
H A W A - J u n i o r 4 0 H A W A - J u n i o r 8 0
H A W A - J u n i o r 1 2 0
To p t r a c k s e t s w i t h r e t a i n e r s f o r s t a t i o n a r y g l a s sOur new top track sets with integrated retainers for stationary glassadd an extremely versatile and user-friendly partitioning system to theHAWA-Junior family.The glass element is simply positioned in the track’s stationary glassretainer. Glass cut-outs and visible hardware are now no longer nec-essary. A retainer profile for wall and floor fitting provides sufficientstability, whether flush or mounted. A Hawa rubber profile or a siliconegroove hold the glass in position and prevent humidity seeping be-tween glass and track. The top track set also has a cover profilemade of aluminium which simply clips into and closes the stationaryglass retainer in the walk-through area - a solution which is both easyto use and pleasing to the eye.
E a s y f i t t i n g o f s t a t i o n a r y g l a s s
1. Slide glass element into stationary glass retainer at the top
2. Position the glass on the spacing block in the floor profile
and/or
3. slide sideways into the wall profile
4. Clip cover profile into the walk-through area profile and seal
5a. with a Hawa rubber profile
or
5b. with a silicone groove
P l a n n i n g / i n s t a l l a t i o nFor planning and installation purposes, please use the installationdrawing code 19564.
Dry glazing with the Hawarubber profileAttention:to be used on both sides, i.e.order double the amount.
Silicone glazing provided by thecustomer
5a
5b
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
10 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78
Junior 40-80-120-160/GP
W a l l c o n n e c t i o n p r o f i l eThe ideal wall connection profile for all-glass sliding doors withunprotected glass edges.
R u b b e r p r o f i l e f o r g l a s s e d g e p r o t e c t i o nSelf-adhesive rubber profile fitted along the glass edge minimisesdraughts and buffers impacts between adjacent all-glass slidingdoors.
B o t t o m - / w a l l g l a s s r e t a i n e r p i e c eIf the load is low, an aesthetically pleasing glass holder of only 50 mmlength can be used instead of the continuous floor or wall profile.
Bottom-, wall- and rubber profile to fixed glass
Caution: Hole positions vary. mm code
Bottom-/wall profile to fixedglass, alu plain anodized,predrilled
4000 19549
6000 19561
cut to size 20067
Rubber profile, black, to fixedglass
roll of10 m
(32'9 2332")
19846
Bottom-/wall glass retainer piece,50 mm (1 31
32"), alu plain anodized, predrilled,with rubber profile
20274
Wall connection profile
Caution: Minor differences in colour are possible. mm/inch code
Wall profile, alu plainanodized, undrilled
2500 (8'2 716 ") 17020
3500 (11'5 1316 ") 17021
Wall profile, alu,stainless steel effect,brushed, undrilled
2500 (8'2 716 ") 20119
3500 (11'5 1316 ") 20120
Seal profile, black,for wall profile
roll 2500 (8'2 ( 716 ") 16452
roll 3500 (11'5 1316 ") 16453
Centering assembly black for all glass slidingdoors, to wall profile 18663
Centering assembly grey for all glass slidingdoors 18619
Rubber profile for glass edge protection
roll of code
Rubber profile self-adhesive,for 8/10 mm ( 5
16 "/ 1332") glass
thickness, black,glass distance 4 mm ( 5
32")
5 m (16'4 2732") 19442
10 m (32'9 2332") 19443
50 m (164' 12") 19444
Rubber profile self-adhesive,for 8/10 mm ( 5
16 "/ 1332") glass
thickness, translucent,glass distance 4 mm ( 5
32")
5 m (16'4 2732") 19445
10 m (32'9 2332") 19446
50 m (164' 12") 19447
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78 11
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
Junior 40-80-120-160/GP Pat. pend.
O r d e r s p e c i f i c a t i o n s• Type and quantity of partial sets• Type and quantity of cover plates• Type and length of top track• Type and length of bottom guide channel• Type and quantity of floor-mounted guides
O p t i o n a l o r d e r s p e c i f i c a t i o n s• Length of rubber profile for glass edge protection• Quantity of centering assemblies for wall connection profile
O r d e r s p e c i f i c a t i o n s f i x e d g l a s s• Type and quantity of top tracks with fixed glass• Type and quantity of fitting sets
O p t i o n a l o r d e r s p e c i f i c a t i o n f i x e d g l a s s• Type and quantity of bottom/wall profile• Quantity of rubber profile to fixed glass
A c c e s s o r i e sAccessories see catalogue glass/metal
P l a n n i n g / i n s t a l l a t i o nFor planning and installation purposes, please use the installationdrawing code 16023.
F i t t i n g s e t t o H A W A - A d a p t o 8 0 - 1 2 0The HAWA-Junior top tracks both with and without a bottom profilefor stationary glass can be screwed into the embedded HAWA-Adapto profile using special adjustable screws (cheese head screws).Dimensional differences in the structure can be quickly and effectivelylevelled out by inserting spacing plates at the track ends, with additionalplates in the centre for lengths of more than 4 m.For details on the HAWA-Adapto 80-120 please see page 26.
Fitting set to HAWA-Adapto 80-120
mm/inch code
Fitting set to HAWA-Adapto 80–120
to 2500(8'2 7
16 ") 20232
2600 to 4000(8'6 3
8 " to 13'1 12")
20233
4100 to 6000(13'5 7
16 to 19'8 732")
20234
Set comprising
mm/inch
2023
2
2023
3
2023
4
code
Distance plate,plastic
1 ( 116 ") 2 2 3 19398
2 ( 332") 2 2 3 19399
3 ( 18 ") 2 2 3 19400
5 ( 732") 4 4 6 19401
Special pan head screws,60 x 22 mm (2 3
8 " x 78 "),
set of 10 pieces1 2 3 20215
For unobtrusive, straight-running sliding glassdoors.
Hardware system with stainless steel effect orplain anodised finish for all-glass sliding doorsweighing up to 40 (88 lbs.) or 80 kg (176 lbes.).
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
12 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78
Junior 40-80/GL Patents
HAWA-Junior 40/GL HAWA-Junior 80/GL
Floor-guide type
Side-fixing up to 120 kg (264 lbs.)see page 25
Inset profile systemHAWA-Adapto 80-120
see page 26
D e s c r i p t i o nHAWA-Junior 40-80/GL with plain anodised or stainless steel effectcover plates, top tracks and angle profiles fits in well with any con-temporary setting. It offers an efficient and cost-effective solution thatis also highly reliable, thanks to tried and tested HAWA-Junior movingparts. Down at floor level, rattle-proof bottom guides ensure quietrunning and keep doors steady in the presence of draughts.HAWA-Junior 40-80/GL hardware is easy to install and absolutelydependable. The dry glazing system requires simple drilling in theglass. The positive fitting glass fixing (patent applied for) ensureslasting reliability in use, even under maximum load. Aluminium coverplates for the slim glass retention profile fit easily, using rubber clips.
A p p l i c a t i o n sWherever rooms need closing with unobtrusive, reliable all-glass slid-ing doors at optimum price/performance, e.g. in hotels, restaurants,conference rooms, airports, office buildings, or even private residentialinteriors and outdoor applications.
F e a t u r e s o f t h e H A W A - J u n i o r 4 0 - 8 0 / G L• Maximum door weight 40/80 kg (88/176 lbs.)• Maximum door width 1200 mm (3'11 1
4")
• Door thickness, toughened safety glass (ESG) 8/9,5/10 mm ( 516
"/38"/13
32")
• Profile height 65 mm (2 916
")• Positive-fitting glass fixing for maximum safety and reliability• Gentle, quiet running• Track stop with adjustable retainer• Vertical adjustment without removing the glass door• Cover plates in various anodised finishes• Rattle proof floor guide for glass sliding doors• Simple installation• Further profiles allow stationary glass to be fitted without the hard-
ware being visible• Can be combined with HAWA-Toplock and wall joint profile, and
HAWA-Junior angle profile for wall fixing
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78 13
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
Junior 40-80/GL Patents
HAWA-Junior 40/GL, partial set for single door, without top track
codeHAWA-Junior 40/GL, partial set for 1 door 19932For two-panel sliding doors please order two sets for single doors.
Partial set comprising
pieces code
Trolley hanger, M8,sleeve bearing mounted, high-gradepolyamide tandem rollers
2 10420
Suspension plate withhanger bolt M8 2 19421
Track stop with progressivelyadjustable retention spring catch 2 10640
Glass retainer profile 240 mm (9 1532"),
aluminium 2 19026
Cover caps for glass retainer profile,plastic, anthracite-grey RAL 7016,set of 2 pieces
1 19927
Fitting set for 2 glass suspensionprofiles (1 horizontal profile) 1 19926
Hex key 4 mm ( 532"),
length 160 mm (6 516 ") 1 19931
Adjustment tool for eccentricglass retainer 1 19256
Adjustment and fixing keyfor suspension assembly 1 10793
HAWA-Junior 80/GL, partial set for single door, without top track
codeHAWA-Junior 80/GL, partial set for 1 door 19933For two-panel sliding doors please order two sets for single doors.
Partial set comprising
pieces code
Trolley hanger, M10,sleeve bearing mounted, high-gradepolyamide tandem rollers
2 10407
Suspension plate withhanger bolt M10 2 19937
Track stop with progressivelyadjustable retention spring catch 2 10628
Glass retainer profile 240 mm (9 1532"),
aluminium 2 19026
Cover caps for glass retainer profile,plastic anthracite-grey RAL 7016,set of 2 pieces
1 19927
Fitting set for 2 glass suspensionprofiles (1 horizontal profile) 1 19926
Hex key 4 mm ( 532"),
length 160 mm (6 516 ") 1 19931
Adjustment and fixing keyfor suspension assembly 1 19256
Cover profiles
Caution: Minor differences in colour are possible. mm/inch code
Cover profile, alu unanodized,(to be finished by customer),2 pieces for 1 horizontal profile,incl. clip-on rubber
1200(3'11 1
4")19923
Cover profile, alu plain anodized,brushed,2 pieces for 1 horizontal profile,incl. clip-on rubber
1200(3'11 1
4")19924
Cover profile, stainless steel effect,brushed,2 pieces for 1 horizontal profile,incl. clip-on rubber
1200(3'11 1
4")19925
Glass fixing parts
thickness of glass code
Glass fixing parts forglass retainer profile240 mm (9 15
32")(1 horizontal profile)
8 mm ( 516 ") 19928
9,5 mm (38 ") 19930
10 mm (1332") 19929
Glass fixing parts must be ordered to match the glass thickness.
G l a s s c u t o u t s / G l a s s c a l c u l a t i o nOnly toughened safety glass (ESG) may be used.
Correctdimensioning
must be observed
H A W A
14 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78
Junior 40-80/GL Patente
Floor-mounted guides / Bottom door stopper
code
Floor guide, screw mounting, rattle proof,plastic, complete, for 8/10/12 (12,7) mm( 5
16 "/ 1332"/
1532")(
12") glass, dull chromium finish
16029
Distance plate to bottom guide 16657
Bottom door stopper, dull chromium finish 17782
Bottom guide channel to HAWA-Junior 40-80/GL
Caution: Hole positions vary. mm code
Bottom guide channel, aluplain anodized, predrilled,20 x 20 x 3 mm (25
32"x2532"x
18 ")
6000 (19'8 732") 14414
cut to size 14415
Self-adhesive sliders 8 mm ( 516 ") glass 16192
Self-adhesive sliders 10 mm (1332") glass 16193
Top tracks to HAWA-Junior 80/GL
Caution: - Hole positions vary- Minor differences in colour are possible mm/inch code
Top track, alu plainanodized, predrilled
1400 (4'7 18 ") 10189
1600 (5'3") 10190
1800 (5'10 78 ") 10191
2000 (6'6 34") 10192
2200 (7'2 58 ") 10193
2500 (8'2 716 ") 10194
3000 (9'10 18 ") 18532
4000 (13'1 12") 18533
6000 (19'8 732") 10186
cut to size 10188
Top track, alu stainless steeleffect, brushed, predrilled
4000 (13'1 12") 20005
6000 (19'8 732") 20004
cut to size 20006
Top track sets to HAWA-Junior 40 with fixed glass
Caution: Hole positions vary. mm code
Top track set with fixed glassto HAWA-Junior 40,alu plain anodized, predrilled
2000 (6'6 34") 20224
6000 (19'8 732") 20225
Partial set comprising
Caution: Hole positions vary. mm
2022
4
2022
5
code
Top track with fixedglass, alu plain an-odized, predrilled
2000 (6'6 34") 1 – 20101
6000 (19'8 732") – 1 20102
Cover profile to toptrack with fixed glass,plain anodized
1250 (4'1 732") 1 – 19552
3000 (9'10 18 ") – 1 19562
Top track sets to HAWA-Junior 80 with fixed glass
Caution: Hole positions vary. mm code
Top track set with fixed glassto HAWA-Junior 80,alu plain anodized, predrilled
2500 (8'2 716 ") 20226
4000 (13'1 12") 20227
6000 (19'8 732") 20228
Partial set comprising
Caution: Hole positions vary. mm
2022
620
227
2022
8
code
Top track withfixed glass, aluplain anodized,predrilled
2500 (8'2 716 ") 1 – – 20104
4000 (13'1 12") – 1 – 20105
6000 (19'8 732") – – 1 20106
Cover profile totop track withfixed glass, plainanodized
1250 (4'1 732") 1 – – 19552
2000 (6'6 34") – 1 – 19553
3000 (9'10 18 ") – – 1 19562
Top tracks to HAWA-Junior 40/GL
Caution: - Hole positions vary- Minor differences in colour are possible mm/inch code
Top track, alu plainanodized, predrilled
1400 (4'7 18 ") 10213
1600 (5'3") 10214
1800 (5'10 78 ") 10215
2000 (6'6 34") 10216
3000 (9'10 18 ") 18530
4000 (13'1 12") 18531
6000 (19'8 732") 10211
cut to size 10217
Top track, alu stainless steeleffect, brushed, predrilled
4000 (13'1 12") 20002
6000 (19'8 732") 20001
cut to size 20003
16193 sliders can be usedfor 9,5 mm (3
8") glass.
Floor guide, screw mounting,rattle proof
Bottom guide channeldetails see catalogueglass/metal.
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78 15
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
Junior 40-80/GL
H A W A - J u n i o r 8 0
5a
5b
H A W A - J u n i o r 4 0To p t r a c k s e t s w i t h r e t a i n e r s f o r s t a t i o n a r y g l a s sOur new top track sets with integrated retainers for stationary glassadd an extremely versatile and user-friendly partitioning system to theHAWA-Junior family.The glass element is simply positioned in the track’s stationary glassretainer. Glass cut-outs and visible hardware are now no longer nec-essary. A retainer profile for wall and floor fitting provides sufficientstability, whether flush or mounted. A Hawa rubber profile or a siliconegroove hold the glass in position and prevent humidity seeping be-tween glass and track. The top track set also has a cover profilemade of aluminium which simply clips into and closes the stationaryglass retainer in the walk-through area - a solution which is both easyto use and pleasing to the eye.
E a s y f i t t i n g o f s t a t i o n a r y g l a s s
1. Slide glass element into stationary glass retainer at the top
2. Position the glass on the spacing block in the floor profile
and/or
3. slide sideways into the wall profile
4. Clip cover profile into the walk-through area profile and seal
5a. with a Hawa rubber profile
or
5b. with a silicone groove
P l a n n i n g / i n s t a l l a t i o nFor planning and installation purposes, please use the installationdrawing code 19564.
Dry glazing with the Hawarubber profileAttention:to be used on both sides, i.e.order double the amount.
Silicone glazing provided by thecustomer
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
16 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78
Junior 40-80/GL Patente
Wall connection profile
Caution: Minor differences in colour are possible. mm/inch code
Wall profile, alu plainanodized, undrilled
2500 (8'2 716 ") 17020
3500 (11'5 1316 ") 17021
Wall profile, alu,stainless steel effect,brushed, undrilled
2500 (8'2 716 ") 20119
3500 (11'5 1316 ") 20120
Seal profile, black,for wall profile
roll 2500 (8'2 ( 716 ") 16452
roll 3500 (11'5 1316 ") 16453
Centering assembly black for all glass slidingdoors, to wall profile 18663
Centering assembly grey for all glass slidingdoors 18619
Rubber profile for glass edge protection
roll of code
Rubber profile self-adhesive,for 8/10 mm ( 5
16 "/ 1332") glass
thickness, black,glass distance 4 mm ( 5
32")
5 m (16'4 2732") 19442
10 m (32'9 2332") 19443
50 m (164' 12") 19444
Rubber profile self-adhesive,for 8/10 mm ( 5
16 "/ 1332") glass
thickness, translucent,glass distance 4 mm ( 5
32")
5 m (16'4 2732") 19445
10 m (32'9 2332") 19446
50 m (164' 12") 19447
W a l l c o n n e c t i o n p r o f i l eThe ideal wall connection profile for all-glass sliding doors withunprotected glass edges.
R u b b e r p r o f i l e f o r g l a s s e d g e p r o t e c t i o nSelf-adhesive rubber profile fitted along the glass edge minimisesdraughts and buffers impacts between adjacent all-glass slidingdoors.
Bottom-, wall- and rubber profile to fixed glass
Caution: Hole positions vary. mm code
Bottom-/wall profile to fixedglass, alu plain anodized,predrilled
4000 19549
6000 19561
cut to size 20067
Rubber profile, black, to fixedglass
roll of10 m
(32'9 2332")
19846
Bottom-/wall glass retainer piece,50 mm (1 31
32"), alu plain anodized, predrilled,with rubber profile
20274
B o t t o m - / w a l l g l a s s r e t a i n e r p i e c eIf the load is low, an aesthetically pleasing glass holder of only 50 mmlength can be used instead of the continuous floor or wall profile.
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78 17
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
Junior 40-80/GL Pat. pend.
O r d e r s p e c i f i c a t i o n s• Type and quantity of partial sets• Type and quantity of cover profiles• Type and quantity of glass fixing parts• Type and length of top tracks• Type and quantity of floor-mounted guides
O r d e r s p e c i f i c a t i o n s o p t i o n a l• Quantity of bottom door stopper• Type and length of wall profile• Type and length of seal profile to wall profile• Type and quantity of centering assemblies for wall connection• Type and length of rubber profile for glass edge protection
O r d e r s p e c i f i c a t i o n s f i x e d g l a s s• Type and quantity of top tracks with fixed glass• Type and quantity of fitting sets
O p t i o n a l o r d e r s p e c i f i c a t i o n f i x e d g l a s s• Type and quantity of bottom-/wall profile• Quantity of rubber profile to fixed glass
A c c e s s o r i e sAccessories see catalogue glass/metal
P l a n n i n g / i n s t a l l a t i o nFor planning and installation purposes, please use the installationdrawing code 19918.
Fitting set to HAWA-Adapto 80-120
mm/inch code
Fitting set to HAWA-Adapto 80–120
to 2500(8'2 7
16 ") 20232
2600 to 4000(8'6 3
8 " to 13'1 12")
20233
20234
Set comprising
mm/inch
2023
2
2023
3
2023
4
code
Distance plate,plastic
1 ( 116 ") 2 2 3 19398
2 ( 332") 2 2 3 19399
3 ( 18 ") 2 2 3 19400
5 ( 732") 4 4 6 19401
Special pan head screws,60 x 22 mm (2 3
8 " x 78 "),
set of 10 pieces1 2 3 20215
S a f e t y l o c kThanks to its combined aesthetic and security appeal, the HAWA-Toplock for all-glass sliding doors makes the ideal solution.Details see pages 28/29.
F i t t i n g s e t t o H A W A - A d a p t o 8 0 - 1 2 0The HAWA-Junior top tracks both with and without a bottom profilefor stationary glass can be screwed into the embedded HAWA-Adapto profile using special adjustable screws (cheese head screws).Dimensional differences in the structure can be quickly and effectivelylevelled out by inserting spacing plates at the track ends, with additionalplates in the centre for lengths of more than 4 m.For details on the HAWA-Adapto 80-120 please see page 26.
Hardware systems for all-glass sliding doorsweighing up to 80, 120 and 160 kg(176, 264 and 352 lbs.).
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
18 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78
Junior 80-120-160/G Patents
D e s c r i p t i o nThe HAWA-Junior 80-120-160/G is a truly robust sliding-door hard-ware system for all-glass sliding doors with top-fixed suspension. Itstop-fixed suspension and glass retainer can also be used for station-ary glass panels and doors, and thus provide ideal prerequisites for auniform complete solution.
A p p l i c a t i o n sThis hardware system is suitable for use wherever there is a needfor combining top quality with smooth and quiet operation, e.g. inresidential and public buildings, industrial premises or the administrativesector.
F e a t u r e s o f t h e H A W A - J u n i o r 8 0 - 1 2 0 - 1 6 0 / G• Trolley hanger, sleeve bearing mounted, high-grade polyamide
tandem rollers• Smooth and quiet operation• Vertical adjustment• Track stop with adjustable retainer
HAWA-Junior 80/G HAWA-Junior 160/GHAWA-Junior 120/G
Gla
sshe
ight
Floor-guide type
H a w a - a d v a n t a g eThanks to a special HAWA sus-pension profile it is possible touse either standard or customi-zed top-fixed suspension andglass retainers.
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78 19
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
Junior 80-120-160/G Patents
Partial set for single door, without track
code
HAWA-Junior 80/G 11689
HAWA-Junior 120/G 15292
HAWA-Junior 160/G 12219
For two-panel sliding doors please order two sets for single doors.
HAWA-Junior 80/G, partial set comprising
pieces code
Trolley hanger, M10, sleeve bearingmounted, high-grade polyamidetandem rollers
2 10407
Suspension plate withhanger bolt M10 2 10476
Track stop with progressivelyadjustable retention spring catch 2 10628
Cover cap to top track, rubber, grey 2 10631
Cover cap, rubber, grey, for profile 2 10632
Cover cap, plastic grey(up to 12 mm [15
32"] glass) 2 13180
Screw-on rubber door stop 1 10629
Suspsension assembly lockingwrench 1 10778
HAWA-Junior 120/G, partial set comprising
pieces code
Trolley hanger, M12, sleeve bearingmounted, high-grade polyamidetandem rollers
2 14857
Suspension plate withhanger bolt M12 2 15294
Track stop with progressivelyadjustable retention spring catch 2 14858
Cover cap, rubber, grey, for profile 2 10632
Cover cap, plastic, grey(up to 12 mm [15
32"] glass) 2 13180
Screw-on rubber door stop 1 10629
Suspension assembly lockingwrench 1 14861
HAWA-Junior 160/G, partial set comprising
pieces code
Trolley hanger, sleeve bearingmounted, high-grade polyamidetandem rollers and hanger bolt M14
2 10424
Suspension plate, M14, with fixingscrews 2 10471
Track stop with progressivelyadjustable retention spring catch 2 10639
Cover cap, rubber, grey, for profile 2 10632
Cover cap, plastic, grey(up to 12 mm [15
32"] glass) 2 13180
Screw-on rubber door stop 1 13114
Top tracks to HAWA-Junior 80/G
Caution: Hole positions vary. mm/inch code
Top track, alu plainanodized, predrilled
1400 (4'7 18 ") 10189
1600 (5'2 6364") 10190
1800 (5'10 5564") 10191
2000 (6'6 4764") 10192
2200 (7'2 3964") 10193
2500 (8'2 2764") 10194
3000 (9'10 764") 18532
4000 (13'1 3164") 18533
6000 (19'8 732") 10186
cut to size 10188
Top tracks to HAWA-Junior 120/G
Caution: Hole positions vary. mm/inch code
Top track, alu plainanodized, predrilled
2500 (8'2 2764") 14866
3000 (9'10 764") 14867
4000 (13'1 3164") 14868
6000 (19'8 732") 14869
cut to size 14871
Top tracks to HAWA-Junior 160/G
Caution: Hole positions vary. mm/inch code
Top track, alu plainanodized, predrilled
3000 (9'10 764") 10205
4000 (13'1 3164") 10206
5000 (16'4 2732") 10208
6000 (19'8 732") 10203
cut to size 10207
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
20 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78
Junior 80-120-160/G Patents
Glass suspension and retainer profiles
mm/inch code
Glass suspensionretainer profile, aluunanodized,undrilled
Glassup to12 mm(15
32")
6500(21'3 29
32")10348
cut to size 10349
Glass suspensionretainer profile, aluunanodized,undrilled
Glassup to18 mm(45
64")
6500(21'3 29
32")13158
cut to size 13159
Multi-purpose suspension,retainer profile, alu anodized,undrilled
6500(21'3 29
32")10345
cut to size 12915
Accessories / Bottom door stop
code
Guide with plastic slider, rattle proof,13 mm (33
64") and suspension block 13781
Floor-mounted guide, plastic(surface-mounted lock not possible) 13318
Floor guide, screw mounting, rattle proof,plastic, complete, for 8/10/12 (12.7) mm( 5
16 " / 2564" /
1532")(
12") glass,
dull chromium finish
16029
Glass holder insert, plastic, with screwM6 x 30 mm (2 pieces per profile) 10792
HAWA-Assembly wedge for sliding doorsrunning in the ceiling, set for 1 sliding door(see installation drawing, catalogue glass/metal)
15770
Bottom door stop, dull chromium finish 17782
Integrated locks
code
Bar bolt lock,with retention pin
profile cylinder17 mm (43
64")16760
round cylinder22 mm (55
64")16761
square/hexagonsocket 16762
Bar bolt lock,with guide pinand fixing parts
profile cylinder17 mm (43
64")18484
round cylinder22 mm (55
64")18485
square/hexagonsocket 18486
Security rose 16 mm, for double cylinder17/61 mm, Inox 18502
Spacer for security rose
profile cylinder17 mm (43
64")18493
round cylinder22 mm (55
64")18494
Bottom guide channels
Caution: Hole positions vary. mm/inch code
Bottom guide channel,alu plain anodized,predrilled
6000 (19'8 732") 13688
cut to size 13690
Grooved dowel pinstainless steel
Ø 6 x 40(15
64" x 1 3764")
13759
Protective transparent edge trims
Protective edge trims see HAWA-Junior 80-120-160/GV, catalogue glass/metal.
Cutouts
code
Cutout, bar bolt lock for 17 mm (4364") double cylinder 18489
Cutout, bar bolt lock for 22 mm (5564") double cylinder 18490
Cutout, bar bolt lock, right, square/hexagon socket, on both sides 18491
Services
Surface treatments are charged separately. Price on request.See HAWA-Junior 80-120-160/GV, catalogue glass/metal.
O r d e r s p e c i f i c a t i o n s• Quantity of partial sets• Length of top track• Width and height of glass• Thickness of glass• Quantity and type of additional covering caps• Type of bottom guide• Length of bottom guide channel• Type of glass-door lock• Type of protective edge profile
A c c e s s o r i e sAccessories see catalogue glass/metal
P l a n n i n g / i n s t a l l a t i o n :For planning and installation purposes, please use the followinginstallation drawing code:Code 14577 HAWA-Junior 80/GCode 15470 HAWA-Junior 120/GCode 14579 HAWA-Junior 160/GCode 14706 HAWA-Fixed Glass
Glass cutouts for safety locks:see catalogue glass/metal
G l a s s c u t o u t sFor installation of the glass holder inserts and the safety locks thetoughened safety glass elements must be provided with cutouts.
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78 21
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
Junior 80-120-160/G Patents
Stationary glass HAWA-Fixed Glass
code
Top-fixing plate set for stationary glass,with hanger bolt M12, HAWA-Junior 80/G 14686
Top-fixing plate set for stationary glass,with hanger bolt M12, HAWA-Junior 120/G 15472
Top-fixing plate set for stationary glass,with hanger bolt M12, HAWA-Junior 160/G 14687
Bottom profiles for stationary glass
code
Bottom profile, alu plainanodized, undrilled
6000 mm(19'8 7
32")14691
cut to size 14692
O r d e r s p e c i f i c a t i o n s f o r H A W A - F i x e d G l a s s• Quantity and type of top-fixing plate• Length of bottom profile
P l a n n i n g / i n s t a l l a t i o nFor planning and installation purposes, please use the installationdrawing code 14706.
S t a t i o n a r y g l a s s H A W A - F i x e d G l a s sYou can combine stationary glass designs and sliding doors to forma harmonious unit using our supplementary HAWA-Fixed Glass hard-ware components. In this way you can ensure the best possibleprerequisites for providing a uniform complete solution.
HAWA-Junior 80/G HAWA-Junior 120/G HAWA-Junior 160/G
Gla
sshe
ight
Gla
sshe
ight
Hardware system for sliding doors with a panelweight up to 40 kg (88 lbs.) For low headroomapplications.
H A W A
22 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78
Junior 40/B Patents
Set for single door, without top track
code
HAWA-Junior 40/B 19475
For two-panel sliding doors please order two sets for single doors.
Set comprising
pieces code
Trolley hanger, M8, sleeve bearingmounted, highgrade polyamidetandem rollers
2 10420
Top fixed suspension with plateand hanger bolt M8,frontal attachment
2 19631
Cover cap, rubber, grey 2 18211
Track stop, adjustable retaining force 1 10640
Screw-on rubber door stop 1 10629
Guide, rattle proof,for screw mounting to floor,black plastic
1 14427
Suspension assembly lockingwrench 1 10793
Hex key, 4 mm ( 532"), long version 1 19420
Top tracks
Caution: Hole positions vary. mm/inch code
Top track, alu plainanodized, predrilled
1400 (4'7 18 ") 10213
1600 (5'2 6364") 10214
1800 (5'10 5564") 10215
2000 (6'6 4764") 10216
3000 (9'10 764") 18530
4000 (13'1 3164") 18531
6000 (19'8 732") 10211
cut to size 10217
Top track, alu stainless steeleffect, brushed, predrilled
4000 (13'1 3164") 20002
6000 (19'8 732") 20001
cut to size 20003
P l a n n i n g / i n s t a l l a t i o nPlease use for planning and execution the installation instructionscode 17689.
D e s c r i p t i o nThe HAWA-Junior 40/B is a hardware system with top fixed suspensionfor low headroom applications and for sliding doors with a weight ofup to 40 kg (88 lbs.).
F e a t u r e s o f t h e H A W A - J u n i o r 4 0 / B• Top fixed suspension• Low headroom applications• Light and silent action• Adjustable vertically � 3 mm ( 1
8")
• Track stop, adjustable retaining force
Accessories
code
Guide profile, plastic black, 1300 mm (4'3 316 "),
groove mounted, 10-pieces set 14540
Bottom door stop 17782
Further accessories see catalogue bois.
HAWA-Junior hardware may also be used for glass or metal slidingdoors. Please request the corresponding documentation.
Side-fixing see catalogue bois
Hardware system for sliding doors with apanel weight up to 80 kg (176 lbs.)For low headroom applications.
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78 23
H A W A Junior 80/B Patents
Set for single door, without top track
code
HAWA-Junior 80/B 11704
For two-panel sliding doors please order two sets for single doors.
Set comprising
pieces code
Trolley hanger, M10, sleeve bearingmounted, highgrade polyamidetandem rollers
2 10407
Top fixed suspension with plateand hanger bolt M10 2 10479
Cover cap, rubber, grey 2 10632
Track stop, adjustable retaining force 1 10628
Screw-on rubber door stop 1 10629
Guide, rattle proof,for screw mounting to floor,black plastic
1 14427
Suspension assembly locking wrench 1 10778
D e s c r i p t i o nThe HAWA-Junior 80/B is a hardware system with top fixed suspensionfor low headroom applications and for sliding doors with a weight ofup to 80 kg (176 lbs.).
F e a t u r e s o f t h e H A W A - J u n i o r 8 0 / B• Top fixed suspension• Low headroom applications• Light and silent action• Adjustable vertically � 3 mm ( 1
8")
• Track stop, adjustable retaining force• Lateral fixing of trolleys for sliding doors running in the ceiling
Top tracks
Caution: Hole positions vary. mm/inch code
Top track, alu plainanodized, predrilled
1400 (4'7 18 ") 10189
1600 (5'2 6364") 10190
1800 (5'10 5564") 10191
2000 (6'6 4764") 10192
2200 (7'2 3964") 10193
2500 (8'2 2764") 10194
3000 (9'10 764") 18532
4000 (13'1 3164") 18533
6000 (19'8 732") 10186
cut to size 10188
Top track, alu stainless steeleffect, brushed, predrilled
4000 (13'1 3164") 20005
6000 (19'8 732") 20004
cut to size 20006
Side-fixing see catalogue bois
Accessories
code
HAWA-Assembly wedge for sliding doorsrunning in the ceiling, set for 1 sliding door(See installation drawing, catalogue bois)
15770
Guide profile, plastic black, 1300 mm(4'3 3
16 "), groove mounted, 10-pieces set 14540
Top track cover cap, rubber, grey 10631
Bottom door stop 17782
Further accessories see catalogue bois.
P l a n n i n g / i n s t a l l a t i o nPlease use for planning and execution the installation instructionscode 17689.
Hardware system for sliding doors witha panel weight up to 120 kg (264 lbs.).For low headroom applications.
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
24 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78
Junior 120/B Patents
Set for single door, without top track
code
HAWA-Junior 120/B 14936
For two-panel sliding doors please order two sets for single doors.
Set comprising
pieces code
Trolley hanger, M12, sleeve bearingmounted, highgrade polyamidetandem rollers
2 14857
Top fixed suspension with plate andhanger bolt M12 2 14934
Cover cap, rubber, grey 2 10632
Track stop, adjustable retaining force 1 14858
Screw-on rubber door stop 1 10629
Guide, rattle proof,for screw mounting to floor,black plastic
1 14427
Suspension assembly locking wrench 1 14861
Top tracks
Caution: Hole positions vary. mm/inch code
Top track, alu plainanodized, predrilled
2500 (8'2 2764") 14866
3000 (9'10 764") 14867
4000 (13'1 3164") 14868
6000 (19'8 732") 14869
cut to size 14871
P l a n n i n g / i n s t a l l a t i o nPlease use for planning and execution the installation instructionscode 17689.
D e s c r i p t i o nThe HAWA-Junior 120/B is a hardware system with top fixed suspen-sion for low headroom applications and for sliding doors with a weightof up to 120 kg (264 lbs.).
F e a t u r e s o f t h e H A W A - J u n i o r 1 2 0 / B• Top fixed suspension• Low headroom applications• Light and silent action• Adjustable vertically � 3 mm ( 1
8")
• Track stop, adjustable retaining force• Lateral fixing of trolleys for sliding doors running in the ceiling
Accessories
code
HAWA-Assembly wedge for sliding doorsrunning in the ceiling, set for 1 sliding door(See installation drawing, catalogue bois)
15770
Guide profile, plastic black, 1300 mm(4'3 3
16 "), groove mounted, 10-pieces set 14540
Bottom door stop 17782
Further accessories see catalogue bois.
HAWA-Junior hardware may also be used for glass or metal slidingdoors. Please request the corresponding documentation.
Side-fixing seecatalogue bois
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78 25
H A W A Side-fixing angled profile Pat. pend.
Accessories to HAWA-Junior 40/80/120 Glass-AccessoriesSide-fixing angled profile
Caution: - Hole positions vary- Minor differences in colour are possible. mm/Inch code
HAWA-Junior 40,side-fixing angled profile, alu,plain anodized, predrilled
2000 (6'6 34") 18291
4000 (13'1 12") 18634
6000 (19'8 732") 17691
cut to size 17692
HAWA-Junior 40,side-fixing angled profile, alu,plain anodized, undrilled
4000 (13'1 12") 20042
6000 (19'8 732") 20041
cut to size 20043
HAWA-Junior 40,side-fixing angled profile, alu,stainless steel effect, undrilled
4000 (13'1 12") 20008
6000 (19'8 732") 20007
cut to size 20009
HAWA-Junior 80,side-fixing angled profile, alu,plain anodized, predrilled
2500 (8'2 716 ") 18292
4000 (13'1 12") 18635
6000 (19'8 732") 17693
cut to size 17694
HAWA-Junior 80,side-fixing angled profile, alu,plain anodized, undrilled
4000 (13'1 12") 20040
6000 (19'8 732") 19934
cut to size 19935
HAWA-Junior 80,side-fixing angled profile, alu,stainless steel effect, undrilled
4000 (13'1 12") 20011
6000 (19'8 732") 20010
cut to size 20012
HAWA-Junior 120,side-fixing angled profile, alu,plain anodized, predrilled
4000 (13'1 12") 18877
6000 (19'8 732") 18876
cut to size 18878
HAWA-Junior 40Fitting set for side fixing, 10 pieces,for top track length up to 2000 mm (6'6 47
64")17785
HAWA-Junior 80Fitting set for side fixing, 10 pieces,for top track length up to 2500 mm (8'2 27
64")17786
HAWA-Junior 120Fitting set for side fixing, 20 pieces,for top track length up to 6000 mm (19'8 7
32")19041
Cover plate for side-fixingangled profile,grey RAL 7035,1 pair
HAWA-Junior 40 17787
HAWA-Junior 80 17788
HAWA-Junior 120 19042
Cover plate for side-fixingangled profile,anthracite-grey RAL 7016,1 pair
HAWA-Junior 40 20015
HAWA-Junior 80 20016
HAWA-Junior 120 20049
HAWA-Assembly wedgefor sliding doorsrunning in the ceiling,set for 1 sliding door.
HAWA-Junior 80
HAWA-Junior 12015770
H A W A - J u n i o r 4 0Max. door thickness 28 mm (1 1
8")
H A W A - J u n i o r 8 0Max. door thickness 34 mm (1 11
32")
H A W A - J u n i o r 1 2 0Max. door thickness 45 mm (1 25
32")
HAWA-Junior 40/80/120 Glass-AccessoriesSide-fixing angled profile
D e s c r i p t i o nThe clever wall mounting with the new angle profile for HAWA-Juniortracks, door weight up to 120 kg (264 lbs.).
Features of the HAWA-Junior 40/80/ 120 Glass-Accessories• Permits top-quality design without cover-blinds• Groove nuts clamp tracks rapidly and simply• Convenient levelling thanks to continuous angle profile
H A W A
Subject to modification. Metric specifications are exact. Inches are approximate.
26 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78
Adapto 80-120 Pat. pend.
Let HAWA-Junior 80 and 120 top tracksdisappear into the ceiling with the sophisticatedHAWA-Adapto 80-120 profile.
D e s c r i p t i o nIt is easy and economic to set the HAWA-Adapto 80-120 system inconcrete, integrating it into the building shell and so allowing toptracks for HAWA-Junior 80 and 120 to be fitted flush with the ceiling,whether with or without a profile for fixed glass. This puts an end totroublesome drilling in concrete ceilings, making damaged circuitsand pipelines a thing of the past.
F e a t u r e s o f t h e H A W A - A d a p t o 8 0 - 1 2 0• ceiling-flush fitting of HAWA-Junior top tracks for wooden and
glass sliding doors up to 80 and 120 kg• economic assembly in the building shell• frontal cover caps and a polystyrene insert prevent concrete from
penetrating the system• top tracks do not require a faceplate• further profiles allow fixed glass to be fitted without hardware being
visible• quick and easy track levelling thanks to special adjusting screws and
pre-defined spacing plates
H A W A - A d a p t o 1 2 0
H A W A - A d a p t o 8 0 N ±3 mm from finished wall; N = 10 + S2
N � 20
P l e a s e o b s e r v e w h e n d e s i g n i n gWhen designing your system, please take into account wall structure, ceil-ing layers, and exposed elements such as switches, skirting boards, etc.The HAWA-Adapto profile must be fitted exactly to the shuttering.
For planning and installation purposes, please use the installationdrawing code 19563.
E c o n o m i c a s s e m b l y i n t h e b u i l d i n g s h e l lThe HAWA-Adapto Profile can be integrated in the building shelleasily and exactly using the accessories provided:
1. Plot top track axis on the sheeting.2. Nail plastic mounting clips to the concrete sheeting.3. Fit frontal cover caps and polystyrene insert to HAWA-Adapto
profile and press onto the mounting clips.4. Pour concrete. Done.
Track axis
N ±3 mm from finished wallto HAWA-Junior 120 top track withfixed glass
to HAWA-Junior 120 top trackwithout fixed glass
to HAWA-Junior 80 top track withfixed glass
to HAWA-Junior 80 top trackwithout fixed glass
N ±3 mm from finished wall; N = 10 + S2
N � 25
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78 27
H A W A Adapto 80-120 Pat. pend.
HAWA-Adapto 80-120 without fixet glass
mm/inch code
HAWA-Adapto 80, inset profile for concrete surfacewithout fixed glass, set to HAWA-Junior 80
2500 (8'2 716 ") 20216
4000 (13'1 12") 20217
HAWA-Adapto 120, inset profile for concrete surfacewithout fixed glass, set to HAWA-Junior 120
3000 (9'10 18 ") 20218
4000 (13'1 12") 20219
Sets comprising
mm/inch
2021
620
217
2021
820
219
code
HAWA-Junior 80inset profile forconcrete surfaces,alu
2500 (8'2 716 ") 1 – – – 20087
4000 (13'1 12") – 1 – – 20088
HAWA-Junior 120inset profile forconcrete surfaces,alu
3000 (9'10 18 ") – – 1 – 20093
4000 (13'1 12") – – – 1 20091
HAWA-Adapto 80polystyrene insert
1000 (3'3 38 ") 2 4 – – 19418
500 (1'7 1116 ") 1 – – – 19556
HAWA-Adapto 120polystyrene insert
1000 (3'3 38 ") – – 3 4 19419
HAWA-Adapto 80assembly clips, plastic black 4 5 – – 19344
HAWA-Adapto 120assembly clips, plastic black – – 4 5 19346
HAWA-Adapto 80cover plate, plastic grey 2 2 – – 19366
HAWA-Adapto 120cover plate, plastic grey – – 2 2 19368
HAWA-Adapto 80-120 with fixed glass
mm/inch code
HAWA-Adapto 80, inset profile for concrete surfacewith fixed glass, set to HAWA-Junior 80
2500 (8'2 716 ") 20220
4000 (13'1 12") 20221
HAWA-Adapto 120, inset profile for concrete surfacewith fixed glass, set to HAWA-Junior 120
3000 (9'10 18 ") 20222
4000 (13'1 12") 20223
Sets comprising
mm/inch
2022
020
221
2022
220
223
code
HAWA-Adapto 80inset profile forconcrete surfaces,alu
2500 (8'2 716 ") 1 – – – 20094
4000 (13'1 12") – 1 – – 20095
HAWA-Adapto 120inset profile forconcrete surfaces,alu
3000 (9'10 18 ") – – 1 – 20100
4000 (13'1 12") – – – 1 20098
HAWA-Adapto 80polystyrene insert
1000 (3'3 38 ") 2 4 – – 19555
500 (1'7 1116 ") 1 – – – 19557
HAWA-Adapto 120polystyrene insert
1000 (3'3 38 ") – – 3 4 19558
HAWA-Adapto 80assembly clips, plastic black 4 5 – – 19568
HAWA-Adapto 120assembly clips, plastic black – – 4 5 19569
HAWA-Adapto 80cover plate, plastic grey 2 2 – – 19968
HAWA-Adapto 120cover plate, plastic grey – – 2 2 19970
Fitting sets to HAWA-Adapto 80-120
mm/inch code
Fitting sets toHAWA-Adapto 80-120
to 2500 (8'2 716 ") 20232
2600 to 4000 (8'6 38 " to 13'1 1
2") 20233
4100 to 6000 (13'5 716 to 19'8 7
32") 20234
Sets comprising
mm/inch
2023
2
2023
3
2023
4
Nr.
Distance plate,plastic
1 ( 116 ") 2 2 3 19398
2 ( 332") 2 2 3 19399
3 ( 18 ") 2 2 3 19400
5 ( 732") 4 4 6 19401
Special pan head screws,60 x 22 mm (2 3
8 " x 78 "),
set of 10 pieces1 2 3 20215
T h e t e a m : H A W A - A d a p t o a n d H A W A - J u n i o rHAWA-Adapto was designed for the following glass and wood slidingsystems:
• HAWA-Junior 80-120/GP• HAWA-Junior 80/GL• HAWA-Junior 80-120/B
E a s y i n s t a l l a t i o n o f H A W A - J u n i o r t o p t r a c k sThe HAWA-Adapto profile has a screw duct. HAWA-Junior top tracksboth with and without a bottom profile for fixed glass can be attachedvia the screw duct with special adjustable screws (cheese head screws).Dimensional differences in the structure can be quickly and effectivelylevelled out by inserting spacing plates at the track ends, with addi-tional plates in the centre for lengths of more than 4 m.For planning and installation purposes, please use the installationdrawing code 19564.
Lock for all-glass sliding door for glassthicknesses: 8 ( 5
16"), 10 (1332") and 12 mm (15
32")[12,7 mm (1
2")].
H A W A
28 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78
Toplock
D e s c r i p t i o nThe HAWA-Toplock for sliding doors offers two outstanding features:its aesthetic design and a high level of security. It is a high-quality lockfor securing sliding doors fitted with a 17 mm profile or 22 mm roundcylinder. It has been designed to blend perfectly with the HAWA-Junior GP range of sliding door systems in terms of both form andcolour. A countercasing is available for locking double-panel slidingdoor systems. A wall-fitting profile with integrated locking plate allowssecuring doors to a wall surface. The angled countercasing enableslocking of doors that run in front of a wall, or stationary glass.
A p p l i c a t i o n sThis hardware system is suitable for use wherever high quality andelegance are called for, e.g. in shopping centres, hotels, restaurants,banks, airports, railway stations, interiors of private households andpublic administration buildings.
F e a t u r e s o f t h e H A W A - To p l o c k• Suitable for securing single- and double-panel systems• Available for 17 mm profile cylinder or 22 mm round cylinder locks• The lock can be used on the left or right as desired• Cover s available in a variety of colours• Simple to install• Various fitting options
I n s t a l l a t i o n o p t i o n s
HAWA-Junior 40-80-120/GPHAWA-Junior 40-80/GS
HAWA-Junior 40-80-120/GPHAWA-Junior 40-80/GSHAWA-Junior 80-120-160/GHAWA-Symmetric 80/GHAWA-Junior 80-120-160/GVHAWA-Symmetric 80/GV
HAWA-Junior 40-80-120/GPStationary glass
Door handle not supplied by Hawa AG
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-1-767 91 91 Fax +41-1-767 91 78 29
H A W A Toplock
HAWA-Toplock
code
Lock for all-glasssliding door,without cover plates
profile cylinder17 mm (43
64")17200
round cylinder22 mm (55
64")17201
Countercasing,including centering assemblies,without cover plates
17202
Multi-purpose drilling jig for lock andcountercasing 17162
Security rose for profile cylinder17 mm (43
64") chrome nickel steel
12 mm (1532") 14147
14 mm (3564") 17839
Caution: Minor differences in colour are possible. mm code
Wall profile, alu plainanodized, undrilled
2500 (8'2 2764") 17020
3500 (11'5 5164") 17021
Wall profile, alu, stainlesssteel effect, brushed,undrilled
2500 (8'2 2764") 20119
3500 (11'5 5164") 20120
Seal profile, black,for wall profile
roll 2500(8'2 27
64")16452
roll 3500(11'5 51
64")16453
Strike plate for wall profile,including centering assemblies 17182
Lock bracket, without cover plate 17203
Lock bracket fixture for stationary glasswithout cover plate 18611
Spacer 3 mm,for lock bracket, in combination with theHAWA-Junior 40 angle profile
19621
Spacer 6 mm,for lock bracket, in combination with theHAWA-Junior 80 angle profile
17688
Spacer 12 mm,for lock bracket, in combination with theHAWA-Junior 120 angle profile
19622
L o c k f r o n t v i e w W a l l c o n n e c t i o n p r o f i l eO r d e r s p e c i f i c a t i o n s
• Type of cylinder, 17 or 22 mm ( 4364
" or 5564
")• Type and quantity of cover plates• Drilling jig• Lock counter part requirement
P l a n n i n g / i n s t a l l a t i o nPlease be sure to use our installation instructions code 17199 wheninstalling the HAWA-Toplock.
A n g l e p r o f i l e f o r w a l l m o u n t i n gDetails for angle profile for wall mounting see page 25.Documentation 17688/19621/19622 is needed only in associationwith the HAWA-Junior angled profile for side fixing to walls, andHAWA-Junior 120 without angled profile.
Cover plates
code
Rounded coverplates,for 17 mm ( 11
16 ")cylinder, plastic(1 pair)
dull chromium finish 17184polished chromium finish 17187brass polished 17185stainless steel effect 17186raw 17188
Rounded coverplates,for 22 mm ( 7
8 "),cylinder, plastic(1 pair)
dull chromium finish 17189polished chromium finish 17192brass polished 17190stainless steel effect 17191raw 17193
Rounded coverplates forcountercasing,plastic(1 piece)
dull chromium finish 17194polished chromium finish 17197brass polished 17195stainless steel effect 17196raw 17198
Rounded coverplates for lockbracket, plastic(1 piece)
dull chromium finish 17204polished chromium finish 17207brass polished 17205stainless steel effect 17206raw 17208
Rounded coverplates for lockbracket fixture forstationary glass
dull chromium finish 18525polished chromium finish 18528brass polished 18526stainless steel effect 18527raw 18339
Square cover platesfor 17 mm ( 11
16 ")cylinder plastic(1 pair)
dull chromium finish 19095
stainless steel effect 19096
raw 19097
Square cover platesfor 22 mm ( 7
8 ")cylinder plastic(1 pair)
dull chromium finish 19098
stainless steel effect 19099
raw 19100
Square cover platefor countercasingplastic(1 piece)
dull chromium finish 19101
stainless steel effect 19102
raw 18998
HAWA-SoundEx confines transmission ofstructure-borne noise from the sliding systemto the building.
H A W A
30 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-1-767 91 91 Fax +41-1-767 91 78
SoundEx and wall connection profile
HAWA-SoundEx
code
HAWA-SoundEx,includingfixing parts fortop track1 piece
HAWA-Junior 40 19588
HAWA-Junior 80 19589
HAWA-Junior 120 19590
L = Track hole spacing
P l a n n i n g / i n s t a l l a t i o nFor planning and installation purposes, please use the installationdrawing code 19661.
H A W A - J u n i o r 4 0 H A W A - J u n i o r 8 0
H A W A - J u n i o r 1 2 0
M4 M5
M5
HAWA-Wall connection profile
D e s c r i p t i o nThe ideal wall connection profile for all-glass sliding doors withunprotected glass edges, e.g. for HAWA-Junior GP and GS.
Wall connection profile
Caution: Minor differences in colour are possible. mm/inch code
Wall profile, alu plainanodized, undrilled
2500 (8'2 716 ") 17020
3500 (11'5 1316 ") 17021
Wall profile, alu,stainless steel effect,brushed, undrilled
2500 (8'2 716 ") 20119
3500 (11'5 1316 ") 20120
Seal profile, black,for wall profile
roll 2500(8'2 7
16 ") 16452
roll 3500(11'5 13
16 ") 16453
Centering assembly black for all glass slidingdoors, to wall profile 18663
Centering assembly grey for all glass slidingdoors 18619
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78 31
H A W A Notices
1 . G e n e r a l p r o v i s i o n s1.1 The following terms apply to all agreements, regardless of whether these may specifically be sales agreements, work contracts or supply
contracts.1.2 These conditions governing supplies and services are also valid even if they have no longer been expressly repeated or agreed.1.3 It is understood that these terms are accepted by the customer, at the latest at the time of receipt of our deliveries and services.1.4 Statements on the part of our contractual partners to the effect that their terms of business shall be effective, cannot be accepted.
2 . E s t i m a t e s a n d c o n c l u s i o n o f c o n t r a c t s2.1 Our estimates are not binding and are subject to alteration without notice. Verbal statements on the part of our representatives, as well
as all orders, require our written confirmation in order to become legally binding; this also applies to annexes, amendments or secondaryagreements.
2.2 Drawings, illustrations, dimensions, weights or other specifications are only binding if they have been explicitly agreed in writing.2.3 The extent of the deliveries or services is determined by the concurrent written declarations of both parties. If an order has been placed
or a delivery is effected by us without existing concurrent written statements, then our order confirmation shall be binding.
3 . D e l i v e r i e s3.1 The supplier is entitled to determine the means of dispatch. Freight charges or postage will be billed in full for all express, mail and direct
consignments. We also reserve the right to bill for partial freight costs. Any taxes and charges due will be passed on in full.3.2 Surcharges for small orders will be applicated as follows: for consignments with a value of up to Sfr. 250.–, a small order sucharge of
Sfr. 60.- will be billed.3.3 We reserve the right to charge packaging at cost. Special packaging requirements will be charged separately.3.4 Returned goods will not be accepted without our prior consent. Any processing involved will be charged according to actual cost.
4 . D e l i v e r y t i m e s4.1 The delivery times for goods and services depends upon the mutual concurrent written statements concerned. If specific dates have not
been agreed upon, notification of the deadline for the delivery of goods or provision of services must be made to us in good time, in orderto enable us to deliver the goods or provide the services concerned within the course of our normal business activity.
4.2 We cannot be held responsible if any delivery or performance date, even if it has been agreed upon in a binding manner, should bedelayed or rendered impossible through acts of God or other circumstances beyond our control, in particular strikes, lock-outs,government orders etc. Under such circumstances, we are entitled to postpone the delivery or service partially or in its entirety until suchhindrance has passed, adding a reasonable starting period, or to step down from the contract with regard to not yet fulfilled obligations.
4.3 Observance of deadlines is subject to the punctual receipt of all documents, required approvals, releases and other obligations to beprovided by the customer. If these requirements are not met by our contractual partner, the time limit is extended accordingly.
5 . Te r m s o f d e l i v e r y a n d t r a n s f e r o f r i s k5.1 Interpretation of the terms of delivery clauses EXW, FCA, FAS, FOB, CFR, CIF, CPT, CIP, DAF, DES, DEQ, DDU, DDP is governed by
Incoterms 2000 (international rules for the interpretation of the contractual clauses customary in trade).Publication 560 of the International Chamber of Commerce, Paris, insofar as nothing to the contrary is expressly stipulated in the contract.
5.2 Risk is transfered, even if carriage paid was agreed on, at the time the consignment leaves our warehouse. Transport insurance is alwaysthe responsibility of the customer.
6 . R e s e r v a t i o n o f o w n e r s h i p r i g h t s6.1 Until all debts are paid, including all balances of open current accounts, due now or in the future for any legal reason, the following
securities are to be provided and to be released upon demand, as far as their value substantially exceeds the amount due by more than20 per cent.
6.2 All goods remain our property. If our property rights expire through union, it is already agreed in advance that the property rights to theobjects concerned shall pass to ourselves in proportion to their value (invoice value). Our property is to be preserved for us free of charge.Goods that are our property are designated as reserved property as stated below. This also applies to jointly held property.
6.3 Reserved property can be processed and sold in the due course of business, as long as no default exists. Assignments by way of pledgeor security transfer are not permissible. Claims regarding reserved property arising from re-sale or other legal grounds, including all claimsin connection with open accounts, shall be ceded to us in their full extent as a security already at this time. However, the claim ceded tous may also be collected by our contractual partner, unless this entitlement is revoked. This can only occur if our contractual partner failsto duly fulfill his financial obligations.
6.4 In case of third party intervention regarding the reserved property, our property rights shall be duly declared and notification must be madeto us immediately.
6.5 In case of default of payment, we are entitled to take back the reserved property and, if necessary, to demand the assignment of ourcontractual partner's claim for return of property towards third parties. Taking back or assigning the reserved property by way of pledgedoes not lead to withdrawal from the contract, so far as the legal provisions of instalment sales are not affected.
H A W A
32 Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78
Terms of sales and delivery
7 . Te r m s o f p a y m e n t7.1 Notwithstanding other provisions, our invoices shall be payable within 30 days, without deductions.7.2 Payments are valid as soon as the amount paid is placed at our disposal. In the case of payment by check, payment is not considered
to have been effected until the check has been cleared. We do not accept payment by bill of exchange.7.3 In the event of default of payment, we are entitled to charge interest from the time of default onwards at the interest rate charged by
commercial banks for open current account loans, though at least 4 per cent above the valid bank rate of the Swiss National Bank.7.4 If the financial obligations are not promptly fulfilled, in particular if a check is not cleared or if payments are stopped, or if other circum-
stances become known to us that place the credit standing of our contractual partner in question, we are entitled to declare the entireoutstanding sum as due with immediate effect. We are also entitled to request provision of security.
8 . P r o d u c t p e r f o r m a n c e8.1 If the product performance is not clearly stated in our catalogues, brochures, specification sheets etc., then the performance required of
the individual products must be specifically agreed with us.8.2 Product performance is subject to correct assembly, frequency of use, manner of use, environmental influences, maintenance etc.
9 . P r o d u c t m a i n t e n a n c e9.1 Only such cleaning agents are permitted which do not contain any elements which promote corrosion.
1 0 . O b l i g a t i o n s t o p r o v i d e i n f o r m a t i o n a n d i n s t r u c t i o n10.1 The following documentation must be placed at the disposal of specialised dealers, architects, planners, consultants or processing staff
for information and instruction purposes:� catalogues, brochures� instructions for planning and assembly, as well as for maintenance� advice and training by the company
10.2 For the selection of products, for installation, operation and maintenance tasks:a) Architects, planners and consultants are to request all necessary product information material from us and to observe the contents
thereof.b) Specialised dealers are to observe the contents of all product information and, in particular, to request all necessary instruction material
from us and to place such material at the disposal of all processing staff.c) Processing staff are to observe the contents of all product information and, in particular, to request all maintenance instruction material
from us and to place such material at the disposal of their principals and all users.
1 1 . W a r r a n t y11.1 We can only bear liability towards our contractual partners. Warranty claims are therefore not assignable.11.2 Liability for the faultless functioning of all products delivered by us, and for the service life of all parts, with the exception of parts subject to
wear and tear, will be borne by us for a period of 24 months from the time of the transfer of the risk. No liability will beaccepted by us for damage to parts which wear out prior to normal life expectancy or due to improper handling, if our assemblyinstructions or maintenance instructions are not duly observed, if modifications are carried out on the delivered product, or if spare partsare used which do not correspond to our original specifications. We regret that our guarantee terms do not apply to any item that is usedcontrary to the original specifications. Our warranty for start up, assembly and maintenance is in accordance with the provisions of theSwiss Code of Obligations.
11.3 Defective products that are reported to us in due time during the warranty period will be replaced by us free of charge. No additionalclaims may be made which go beyond the replacement of Hawa mountings free of charge. If we are requested to repair such defects onlocation, we are entitled to receive reimbursement for additional expenditure incurred.
11.4 We are entitled to request the defective part to be returned to us for repair purposes, after which it will be returned to the customer, or thatit should be held ready for our collection.
11.5 For secondary repairs undertaken by ourselves we grant the same warranty as for the delivered product or service, though only for aperiod of 6 months. The warranty period commences on the day the secondary repair was accepted. Should the repaired product fail tofunction after repeated reasonable attempts, or should we fail to comply with a deadline set for repairing a defect through our own fault,the contract can be cancelled, or a reduction of the price can be demanded. This right also applies in the event that we should neglectour duty to repair a defect through our own fault.
1 2 . P l a c e o f j u r i s d i c t i o n12.1 The declared place of jurisdiction is Affoltern am Albis/Switzerland. The supplier also reserves the right to take action against the customer
in the latter's own place of jurisdiction.12.2 This legal relationship is subject to Swiss law.
Hawa AG CH-8932 Mettmenstetten www.hawa.ch Tel. +41-44-767 91 91 Fax +41-44-767 91 78 33
H A W A Terms of sales and delivery
H A W A
34
Agents
For information please contact:
Country Address
Belgium Geert Lesage BVBA, Schaapsdreef 48,BE-8500 Kortrijk
Tel.MobileFaxe-Mail
+32 (0) 56 37 26 04+32 (0) 495 38 55 51+32 (0) 56 37 23 74
Denmark J A Konsult AB, Jan und Joakim AnderssonKompanigatan 1-2,SE-553 05 Jönköping
Tel.Mobile JanMobile JoakimFaxe-Mail Jane-Mail Joakim
+46 (0) 36 16 45 49+46 (0) 707 16 45 49+46 (0) 706 088 266+46 (0) 36 16 45 [email protected]
France Patrick Huet, Quartier Pierre Blanche,FR-07610 Sécheras
Tel.Faxe-Mail
+33 (0) 677 17 47 55+33 (0) 475 07 03 [email protected]
Germany Peter Riexinger, Lerchenweg 12,DE-86925 Fuchstal 1
Tel.MobileFaxe-Mail
+49 (0) 8243 3253+49 (0) 171 51 444 06
+49 (0) 8243 [email protected]
Ulrich Kraus, Schönbergstrasse 5,DE-34587 Felsberg
Tel.MobileFaxe-Mail
+49 (0) 5662 939 344+49 (0) 175 164 47 11+49 (0) 5662 939 [email protected]
Ingo Kruse, Pommernring 8,DE-17129 Tutow
Tel.MobileFaxe-Mail
+49 (0) 399 99 7 11 93+49 (0) 160 71 71 300
+49 (0) 399 99 7 11 [email protected]
South America Octavio Haramburu, Arquitecto, Simbrón 3586 1°C,AR-C1417EVB, Ciudad Autónoma de Buenos Aires.Rep. Argentina
Tel./FaxMobilee-Mail
+54 (0) 11 4501 8640+54 (0) 11 15 4938 8024
Sweden J A Konsult AB, Jan und Joakim AnderssonKompanigatan 1-2,SE-553 05 Jönköping
Tel.Mobile JanMobile JoakimFaxe-Mail Jane-Mail Joakim
+46 (0) 36 16 45 49+46 (0) 707 16 45 49+46 (0) 706 088 266+46 (0) 36 16 45 [email protected]
Specialist dealers
Please ask for our detailed list of suppliers.
Hawa AG Telephon Telefax
Untere Fischbachstrasse 4 Main number +41-44-767 91 91 Main number +41-44-767 91 78
P.O. Box Sales +41-44-767 91 04
CH-8932 Mettmenstetten
www.hawa.ch
Hawa AG, CH-8932 Mettmenstetten, Switzerland, Tel. +41 44 767 91 91, Fax +41 44 767 91 78, www.hawa.ch
2042
9/04
.05/
engl
isch
© H
awa
AG