The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performednecessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser mustmake its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products.Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method, or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USE OR PURPOSE. We also make nowarranty against infringement of any patents by reason of purchaser’s use of any product described in this document.

1

MOISTURIZING BODY WASH with CERAPHYL RMT and CONDITIONEZE 7

Formula #: 10804-50-1

INGREDIENTS %W/W SUPPLIERPHASE ADeionized Water 10.75Sodium Laureth Sulfate (Standapol ES-3) 30.00 HenkelCocamidopropyl Betaine (Tego Betaine F) 15.00 GoldschmidtPEG-6 Caprylic/Capric Glyceride (Softigen 767) 6.00 Huls AmericaPolyquaternium-7 (CONDITIONEZE 7) 2.00 ISPGlycerin 3.00Citric Acid 0.10 Haarmann&ReimerTitanium Dioxide (Titanium Dioxide 3328) 0.50 Whittaker,Clark&DanielsTriethanolamine, 99% 1.80 WitcoLauryl Glucoside (and) Sodium Laureth Sulfate (Plantaren PS 200) 13.50 HenkelDisodium EDTA (Versene NA) 0.10 Dow Chemical

PHASE BDistilled Palm Fatty Acid (Prifac 7971) 4.50 UniqemaCastoryl Maleate (CERAPHYL RMT) 2.50 ISPSoybean Oil 4.00C12-15 Alkyl Lactate (CERAPHYL 41) 4.50 ISP

PHASE CFragrance #4019-10156 0.75 BelmayPropylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben (GERMABEN II) 1.00 ISP

--------- 100.00%

PROCEDURE1. Combine Phase A mixing well between additions.2. Heat Phase A to 70-75°C.3. Combine Phase B and heat to 70-75° C while mixing.4. Add Phase B to Phase A, continue mixing; begin cooling.5. Add Phase C @ 40C. QS for water loss.

pH = 6.33Viscosity = 36,000 cps (Brookfield Model RVT, TB @ 5 RPM)This formula has passed a 28 day double challenge efficacy test. However, the preservative system has not been optimized to its lowesteffective level. 6/02BG

The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performednecessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser mustmake its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products.Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method, or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USE OR PURPOSE. We also make nowarranty against infringement of any patents by reason of purchaser’s use of any product described in this document.

2

NONIONIC MOISTURIZING LOTION with RAPITHIX™ A-100Formula #: 10804-99-1

INGREDIENTS %W/W SUPPLIERPHASE ADeionized Water 78.20Disodium EDTA (Versene NA) 0.10 Dow ChemicalGlyceryl Polymethacrylate (and) Butylene Glycol (and) PVM/MA Copolymer (LUBRAJEL® OIL BG) 0.50 ISPSodium Polyacrylate (RAPITHIX™ A-100) 0.75 ISP

PHASE BOctyldodecyl Stearate (CERAPHYL® ODS) 3.50 ISPIsostearyl Neopentanoate (CERAPHYL® 375) 3.50 ISPDiisopropyl Adipate (CERAPHYL® 230) 2.50 ISPEthylhexyl Palmitate (CERAPHYL® 368) 2.50 ISPC12-15 Alkyl Lactate (CERAPHYL® 41) 3.00 ISPGlyceryl Stearate (and) Laureth-23 (CERASYNT® 945) 1.25 ISPPEG-20 Stearate (CERASYNT® 840) 1.00 ISP

PHASE CCyclomethicone (SI-TEC™ CM 040) 2.50 ISP

PHASE DPropylene Glycol (and) Diazolidinyl Urea (and) Iodopropynyl Butylcarbamate (LIQUID GERMALL® PLUS) 0.70 ISP

---------- 100.00%

PROCEDURE1. Combine Phase A except for RapiThix A-100. Sprinkle in RapiThix A-100 with good mixing.2. Combine Phase B with mixing and heat to 70ºC.3. When Phase A is uniform and Phase B is at 70ºC slowly add Phase B to Phase A with good mixing.4. When batch is uniform add Phase C with good mixing.5. Add Phase D and mix until the batch is completely uniform. 1/03BG

pH = 5.90Viscosity = 23,200 cps (Brookfield Model RVT, TB @ 5 RPM)

This formula has passed a 28-day double challenge efficacy test. However, the preservative system has not been optimizedto its lowest effective level.

The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performednecessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser mustmake its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products.Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method, or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USE OR PURPOSE. We also make nowarranty against infringement of any patents by reason of purchaser’s use of any product described in this document.

3

SHEER BODY MOISTURIZER with RAPITHIX™ A-60Formula #: 10844-123-1

INGREDIENTS %W/W SUPPLIERPHASE ADeionized Water 82.42Disodium EDTA (Versene NA) 0.10 Dow ChemicalGlyceryl Polymethacrylate (and) Propylene Glycol (and) PVM/MA Copolymer (LUBRAJEL® OIL) 1.00 ISPSodium Polyacrylate (and) Hydrogenated Polydecene (and) Trideceth-6 (RAPITHIX™ A-60) 1.73 ISP

PHASE BDimethicone (SI-TEC™ DM 350) 6.50 ISPPhenyl Trimethicone (SI-TEC™ PTM 20) 3.00 ISPLauryl Dimethicone (SI-TEC® LDM 3107) 1.50 ISPLauryl Lactate (CERAPHYL® 31) 2.00 ISPEthylhexyl Palmitate (CERAPHYL® 368) 1.00 ISP

PHASE CPropylene Glycol (and) Diazolidinyl Urea (and) Iodopropynyl Butylcarbamate (LIQUID GERMALL® PLUS) 0.75 ISP

---------- 100.00%

PROCEDURE1. Combine ingredients in Phase A and mix.2. Combine ingredients in Phase B and mix until uniform.3. Add Phase B to Phase A. Mix until uniform.4. Add Phase C. 11/02CS

pH = 6.89Viscosity = 33,200 cps (Brookfield Model RVT, TB @ 5 RPM)

This formula has passed a 28-day double challenge efficacy test. However, the preservative system has not been optimized to its lowest effective level.

The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performednecessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser mustmake its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products.Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method, or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USE OR PURPOSE. We also make nowarranty against infringement of any patents by reason of purchaser’s use of any product described in this document.

4

INGREDIENTS %W/W SUPPLIERPHASE ADeionized Water 77.90PVM/MA Decadiene Crosspolymer (STABILEZE® QM) 0.20 ISPDisodium EDTA (Versene NA) 0.10 Dow ChemicalHexylene Glycol 2.00ALLANTOIN 0.10 ISPPHASE BGlyceryl Stearate (and) Behenyl Alcohol (and) Palmitic Acid (and) Stearic Acid (and) Lecithin (and) Lauryl Alcohol (and) Myristyl Alcohol (and) Cetyl Alcohol (PROLIPID® 141) 3.00 ISPEthylhexyl Palmitate (CERAPHYL® 368) 2.00 ISPOctyldodecyl Stearate (CERAPHYL® ODS) 5.00 ISPIsostearyl Neopentanoate (CERAPHYL® 375) 3.00 ISPPHASE CSodium Hydroxide (10% Aq. Soln.) 0.55PHASE DGlycerin (and) Glyceryl Polyacrylate (LUBRAJEL® IIXD) 2.00 ISPPhenyl Trimethicone (SI-TEC™ PTM 20) 1.00 ISPCyclopentasiloxane (SI-TEC™ CM 040) 1.00 ISPNAB Mushroom Extract (Ganoderma Lucidum (Mushroom) Stem Extract (and) Lentinus Edodes Extract (and) Algae Extract) 1.00 ArchPHASE EPropylene Glycol (and) Diazolidinyl Urea (and) Iodopropynyl Butylcarbamate (LIQUID GERMALL® PLUS) 0.50 ISPPhenoxyethanol (and) Isopropylparaben (and) Isobutylparaben (and) Butylparaben (LIQUAPAR® PE) 0.50 ISPFragrance (CK-1EE 54017) 0.15 Ungerer

---------- 100.00%

PROCEDURE1. Combine ingredients in Phase A and heat to 80ºC for 45 minutes with mixing.2. Combine ingredients in Phase B. Heat and mix to 75 - 80ºC.3. Add Phase B to Phase A under homogenization. Homogenize until uniform.4. Add Phase C to Phases A&B. Take off homomix, start cooling. Switch to propeller mixing to 40ºC.5. Add Phase D ingredients at 40ºC, one by one and mix well between each addition.6. Add Phase E at 35ºC. QS for water loss. 3/03MG

pH = 5.64 Viscosity = 19, 000 cps (Brookfield Model RVT TC @ 5 RPM)This formula has passed a 28-day double challenge efficacy test. However, the preservative system has not been optimizedto its lowest effective level.

MOISTURE RECOVERY BODY LOTION WITH LUBRAJEL® IIXDFormula #: 10888-68-1

The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performednecessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser mustmake its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products.Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method, or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USE OR PURPOSE. We also make nowarranty against infringement of any patents by reason of purchaser’s use of any product described in this document.

5

AHA MOISTURIZING THERAPY LOTION with PLEXAJEL™ ASCFormula #: 10888-90-1

INGREDIENTS %W/W SUPPLIERPHASE ADeionized Water 63.45Disodium EDTA (Versene NA) 0.10 Dow

PHASE BLactic Acid (Purac 88% Hi Pure) 3.40 PuracSodium Hydroxide (10% Aq. Soln.) 6.60Butylene Glycol 2.00

PHASE CPEG-20 Stearate (CERASYNT® 840) 1.00 ISPGlyceryl Stearate (and) Laureth-23 (CERASYNT® 945) 1.50 ISPEthylhexyl Palmitate (CERAPHYL® 368) 5.00 ISPIsocetyl Stearate (CERAPHYL® 494) 8.00 ISP

PHASE DWater (and) Glycerin (and) Polyacrylimidomethylpropane Sulfonate (and) Polyquaternium-4 (PLEXAJEL® ASC) 3.00 ISPPropylene Glycol (and) Diazolidinyl Urea (and) Iodopropynyl Butylcarbamate (LIQUID GERMALL® PLUS) 0.75 ISPFragrance (Unisex RR 82892) 0.20 UngererSodium Polyacrylate (and) Hydrogenated Polydecene (and) Trideceth-6 (RAPITHIX™ A-60) 5.00 ISP

----------- 100.00%

PROCEDURE1. Disperse Disodium EDTA in water and mix. Begin to heat Phase A to 75ºC.2. At RT separately combine Lactic Acid, Sodium Hydroxide and Butylene Glycol in order listed mixing between additions.3. Add Phase B ingredients to Phase A; mix and maintain temperature at 75º C.4. In a separate container heat Phase C to 75-78º C; stir until uniform.5. Add Phase C to Phases A&B and mix well under propeller.6. Begin cooling. When the batch is 42-45º C add Phase D ingredients in order listed and mix until uniform.7. Adjust for water loss. 4/03MG

pH = 4.44 Viscosity = 11,600 cps (Brookfield Model RVT, TB @ 5 RPM)This formula has passed a 28-day double challenge efficacy test. However, the preservative system has not been optimized to itslowest effective level.

The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performednecessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser mustmake its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products.Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method, or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USE OR PURPOSE. We also make nowarranty against infringement of any patents by reason of purchaser’s use of any product described in this document.

6

INGREDIENTS %W/W SUPPLIERPHASE ADeionized Water 73.15Glycerin 3.50PVM/MA Decadiene Crosspolymer (STABILEZE QM) 0.30 ISPPHASE BDeionized Water 5.00Sodium Hydroxide (10% Solution) 0.75 Fisher ScientificPHASE CBeeswax (Yellow Beeswax NF Prills) 1.00 Frank B.RossOzokerite (Ozokerite Wax SP 1020P) 1.00 Strahl&PitschEthylhexyl Palmitate (CERAPHYL 368) 4.00 ISPMyristyl Myristate (CERAPHYL 424) 3.00 ISPGlyceryl Stearate (CERASYNT SD) 0.50 ISPGlyceryl Stearate (and) Laureth-23 (CERASYNT 945) 1.30 ISPPEG-20 Stearate (CERASYNT 840) 0.70 ISPDimethicone (SI-TEC DM 1000) 2.00 ISPPHASE DCyclopentasiloxane (SI-TEC CM 040) 2.50 ISPPHASE EFragrance (#68665, LSR 17614) 0.20 IntaromePropylene Glycol (and) Diazolidinyl Urea (and) Iodopropynyl Butylcarbamate (LIQUID GERMALL PLUS) 0.60 ISPALLANTOIN 0.50 ISP

---------- 100.00%

PROCEDURE1. Combine water and Glycerin with mixing and then sprinkle in Stabileze QM. Heat at 80°C for at least 45 minutes.2. Combine Phase B and Phase C separately.3. Heat Phase C to 75-80°C with mixing.4. After heating Phase A for 45 minutes add Phase B with mixing.5. As soon as Phase C heats to 75-80°C add it to the batch with mixing.6. Begin to cool the batch. Add Phase D at 55°C with mixing.7. Add Phase E at 35-30°C in order listed mixing well between additions. QS for water loss and mix to RT. 1/02BG

pH = 6.13Viscosity = 26,000 cps (Brookfield Model RVT, TB@ 5 RPM)

This formula has passed a 28 day double challenge efficacy test. However, the preservative system has not been optimized to its lowesteffective level.

SKIN PROTECTANT BABY LOTIONFormula #: 10804-41-1

The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performednecessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser mustmake its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products.Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method, or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USE OR PURPOSE. We also make nowarranty against infringement of any patents by reason of purchaser’s use of any product described in this document.

7

OIL-FREE QUICK-DRY SPF 23 SUNBLOCK with RAPITHIX™ A-100Formula #: 10844-109-1

INGREDIENTS %W/W SUPPLIERPHASE ADeionized Water 50.40Propylene Glycol 5.00Sodium Polyacrylate (RAPTHIX™ A-100) 1.00 ISP

PHASE BOctinoxate (ESCALOL® 557) 7.50 ISPOxybenzone (ESCALOL® 567) 4.00 ISPOctisalate (ESCALOL® 587) 5.00 ISPOctocrylene (ESCALOL® 597) 7.00 ISP

PHASE CAlcohol 20.00Butylated PVP (GANEX® P-904LC) 0.10 ISP

---------- 100.00%

PROCEDURE1. Combine ingredients in Phase A and mix. Heat to 50-55ºC.2. Combine ingredients in Phase B; heat to 60ºC and mix well. Allow to cool to RT.3. Combine Phases C & A and mix until uniform.4. Slowly add Phase B.5. QS with Alcohol. 1/03CS

pH = 6.65Viscosity = 59,600 cps (Brookfield Model RVT, TB @ 5 RPM)

This formula has passed a 28-day double challenge efficacy test. However, the preservative system has not been optimized to its lowest effective level.

The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performednecessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser mustmake its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products.Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method, or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USE OR PURPOSE. We also make nowarranty against infringement of any patents by reason of purchaser’s use of any product described in this document.

8

EYE SMOOTHER with PLEXAJEL™ ASCFormula #: 10888-69-1

INGREDIENTS %W/W SUPPLIERDeionized Water 87.20PVM/MA Decadiene Crosspolymer (STABILEZE® 06) 1.00 ISPSodium Hydroxide (10% Aq. Soln.) 3.00Disodium EDTA (Versene NA) 0.10 DowButylene Glycol 2.00

PHASE BGlycerin (and) Polyacrylimidomethylpropane Sulfonate (and) Polyquaternium-4) (PLEXAJEL™ ASC) 3.00 ISP

PHASE CAloe Barbadensis Leaf Juice (Aloe Gel 10:1 Decolorized) 0.50 Aloe Corp.Ganoderma Lucidum (Mushroom) Stem Extract (and) Lentinus Edodes Extract (and) Algae Extract (NAB Mushroom Extract) 0.50 ArchPropylene Glycol (and) Diazolidinyl Urea (and) Iodopropynyl Butylcarbamate (LIQUID GERMALL® PLUS) 0.70 ISP

PHASE DWater (and) Vaccinum Myrtillus (Bilberry) Extract, Saccharum Officinarum (Sugar Cane) Extract, Acer Saccharum (Sugar Maple) Extract, Citrus Aurantium Dulcis (Orange) Fruit Extract, Citrus Medica Limonum (Lemon) Extract (NAB Multifruit BSC) 1.00 ArchPEG-40 Hydrogenated Castor Oil, Trideceth-9, Propylene Glycol (Solubilizer 2/014160) 1.00 Dragoco

----------- 100.00%

PROCEDURE

1. In a suitable vessel, sprinkle Stabileze 06 into the water. Heat at 78-80ºC and mix for 45 minutes.2. Neutralize with Sodium Hydroxide and mix well until clear.3. Begin cooling. At 65ºC add the remaining ingredients in Phase A in order listed and mix well between each addition.4. When the batch is 50ºC add Plexagel ASC (Phase B); mix well until fully incorporated.5. At 40-42ºC add Phase C ingredients. Slowly mix after each addition.6. At 30ºC, slowly add Phase D ingredients in order listed; mix with moderate speed after each addition until fully

incorporated. Adjust for water loss. 4/03MG

pH = 6.22 Viscosity = 22,000 cps (Brookfield Model RVT, @ TC 5 RPM)This formula has passed a 28-day double challenge efficacy test. However, the preservative system has not been optimized toits lowest effective level.

The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performednecessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser mustmake its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products.Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method, or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USE OR PURPOSE. We also make nowarranty against infringement of any patents by reason of purchaser’s use of any product described in this document.

9

TREATMENT STICK with PROLIPID® 151 and ALLANTOINFormula #: 10889-27-1

INGREDIENTS %W/W SUPPLIERPHASE AParaffin (Paraffin Wax 160/165) 9.50 Frank B.RossGlyceryl Dilaurate (EMULSYNT™ GDL) 20.00 ISPPetrolatum (Snow White Petrolatum) 63.60 PenrecoGlyceryl Stearate (and) Cetyl Alcohol (and) Stearyl Alcohol (and) Behenyl Alcohol (and) Palmitic Acid (and) Stearic Acid (and) Hydroxyethyl Cetearamidopropyldimonium Chloride (PROLIPID® 151) 5.00 ISP

PHASE BALLANTOIN 1.00 ISP

PHASE CIsopropylparaben (and) Isobutylparaben (and) Butylparaben (LIQUAPAR® OIL) 0.40 ISP

PHASE DSilica (Cab-O-Sil M-5) 0.50 Cabot

----------- 100.00%

PROCEDURE1. Melt Phase A ingredients; heat to 80ºC until melted and uniform.2. Maintain batch at 80ºC.3. Add Phase B to batch; mix until uniform.4. Begin cooling batch to 75ºC.5. Add Phase C to batch; mix until uniform.6. Pour samples at 75ºC.

10/02EB

The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performednecessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser mustmake its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products.Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method, or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USE OR PURPOSE. We also make nowarranty against infringement of any patents by reason of purchaser’s use of any product described in this document.

10

SEBUM CONTROL NOURISHING LOTION with VITAL™ ETFormula #: 10888-88-1

INGREDIENTS %W/W SUPPLIERPHASE ADeionized Water 69.60Sodium Polyacrylate (and) Hydrogenated Polydecene (and) Trideceth-6 (RAPITHIX™ A-60) 0.50 ISPDisodium EDTA (Versene NA) 0.10 Dow ChemicalButylene Glycol 2.00PHASE BPEG-20 Stearate (CERASYNT® 840) 1.00 ISPGlyceryl Stearate (and) Laureth-23 (CERASYNT® 945) 1.50 ISPEthylhexyl Palmitate (CERAPHYL® 368) 5.00 ISPGlyceryl Dilaurate (EMULSYNT™ GDL) 0.50 ISPIsodecyl Oleate (CERAPHYL® 140A) 6.00 ISPDiisopropyl Adipate (CERAPHYL® 230) 2.00 ISPPhenyl Trimethicone (SI-TEC™ PTM 20) 1.00 ISPPHASE CSodium Polyacrylate (and) Hydrogenated Polydecene (and) Trideceth-6 (RAPITHIX™ A-60) 1.25 ISPPHASE DGlyceryl Polymethacrylate (and) Butylene Glycol (and) PVM/MA Copolymer (LUBRAJEL® OIL BG) 3.00 ISPCaprylic/Capric Triglyceride (and) Cymbidium Grandiflorum Flower Extract (ORCHID COMPLEX™ OS) 1.50 ISPDisodium Lauriminodipropionate Tocopheryl Phosphates (VITAL™ ET) 3.00 ISPPotassium Azeloyl Diglycinate (Azeloglycina) 1.00 AmitechFragrance (Night Blooming Orchid 00529) 0.30 UngererPropylene Glycol (and) Diazolidinyl Urea (and) Iodopropynyl Butylcarbamate (LIQUID GERMALL® PLUS) 0.75 ISP

------------- 100.00%

PROCEDURE1. Combine ingredients in Phase A in order listed and heat to 75ºC; mix until uniform.2. Separately combine ingredients in Phase B. Mix and heat to 75-80ºC.3. Add Phase B into Phase A under propeller and mix until uniform.4. Begin cooling. When the batch is at 40-45ºC add Phase C and mix well.5. At 40ºC add Phase D ingredients one at a time; mix well after each addition. Adjust for water loss. 4/03MG

pH = 5.80 Viscosity = 10, 800 cps (Brookfield Model RVT, TB @ 5 RPM)

This formula has passed a 28-day double challenge efficacy test. However, the preservative system has not been optimized to its lowesteffective level.

The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performednecessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser mustmake its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products.Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method, or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USE OR PURPOSE. We also make nowarranty against infringement of any patents by reason of purchaser’s use of any product described in this document.

11

INGREDIENTS %W/W SUPPLIERPHASE ADeionized Water 86.73PVM/MA Decadiene Crosspolymer (STABILEZE® 06) 0.75 ISPSodium Hydroxide (10% Aq. Soln.) 1.60

PHASE BDeionized Water 2.00Benzophenone-4 (ESCALOL® 577) 0.02 ISPDisodium EDTA (Versene NA) 0.10 Dow Chemical

PHASE CAloe Barbadensis Leaf Juice (Aloe Vera Gel 10:1 Decolorized) 0.50 Aloe Corp.Hexylene Glycol 5.00Glycerin (and) Glyceryl Polyacrylate (LUBRAJEL® IIXD) 1.00 ISP

PHASE DPEG-40 Hydrogenated Castor Oil, Trideceth-9, Menthol, Water, Melissa Officinalis (Balm Mint) Leaf Extract, Mentha Piperita (Peppermint) Leaf Extract, Rosmarinus Officinalis (Rosemary) Leaf Extract (Extrapone Cooling Complex W/S 2/033300) 0.50 DragocoPEG-40 Hydrogenated Castor Oil, Trideceth-9, Propylene Glycol (Solubilizer 2/014160) 0.50 Dragoco

PHASE EPropylene Glycol (and) Diazolidinyl Urea (and) Iodopropynyl Butylcarbamate (LIQUID GERMALL® PLUS) 0.75 ISPGreen 5 (D&C Green No. 5, 0.1% Aq. Soln.) 0.50 LCWYellow 5 (FD&C Yellow No. 5, 1% Aq. Soln.) 0.05 LCW

---------- 100.00%

PROCEDURE1. Sprinkle Stabileze® 06 into the water. Mix and maintain temperature at 80ºC for 45 minutes.2. Add Sodium Hydroxide solution with good mixing. Stop mixing and let cool to 70ºC.3. In a separate vessel, premix ingredients in Phase B and heat to 55-60ºC. Mix until every ingredient is fully dispersed.4. When the main batch is at 70ºC add Phase B and mix until fully incorporated.5. When the batch is at 60-65ºC add aloe Gel 10:1 and mix. Add Hexylene Glycol to the batch and mix.6. When the batch is at 50-55ºC add Lubrajel® IIXD.7. In a separate vessel, premix ingredients in Phase D; heat to 40-45ºC and mix well.8. Slowly add Phase D at 40ºC to the main batch and mix well until a clear gel is formed.9. At 35-40ºC add Phase E to the batch and mix. Compensate for water loss. 4/03MG

pH = 5.28 Viscosity = 48,000 cps (Brookfield Model RVT, TC @ 5 RPM)This formula has passed a 28-day double challenge efficacy test. However, the preservative system has not been optimized toits lowest effective level.

COOLING GEL with LUBRAJEL® IIXDFormula #: 10888-66-2

The information contained in this document and the various products described are intended for use only by persons having technical skill and at their own discretion and risk after they have performednecessary technical investigations, tests and evaluations of the products and their uses. While the information herein is believed to be reliable, we do not guarantee its accuracy and a purchaser mustmake its own determination of a product’s suitability for purchaser’s use, for the protection of the environment, and for the health and safety of its employees and the purchasers of its products.Neither ISP nor its affiliates shall be responsible for the use of this information, or of any product, method, or apparatus described in this document. Nothing herein waives any of ISP’s or its affiliates’conditions of sale, and WE MAKE NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS OF ANY PRODUCT FOR A PARTICULAR USE OR PURPOSE. We also make nowarranty against infringement of any patents by reason of purchaser’s use of any product described in this document.

12

INGREDIENTS %W/W SUPPLIERPHASE ADeionized Water 46.10Magnesium Aluminum Silicate (Veegum K) 2.00 RT VanderbiltXanthan Gum (Keltrol T) 0.40 CalgonDisodium EDTA 0.10Butylene Glycol 4.00Glyceryl Polymethacrylate (and) Butylene Glycol (and) PVM/MA Copolymer (LUBRAJEL® OIL BG) 1.00 ISPPHASE BIsostearyl Neopentanoate (CERAPHYL® 375) 2.00 ISPGlyceryl Stearate (and) Behenyl Alcohol (and) Palmitic Acid (and) Stearic Acid (and) Lecithin (and) Lauryl Alcohol (and) Myristyl Alcohol (and) Cetyl Alcohol (PROLIPID® 141) 6.00 ISPEthylhexyl Palmitate (CERAPHYL® 368) 4.00 ISPTridecyl Neopentanoate (CERAPHYL® 55) 1.00 ISPOctinoxate (ESCALOL® 557) 7.00 ISPOxybenzone (ESCALOL® 567) 2.00 ISPOctisalate (ESCALOL® 587) 3.00 ISPDimethicone (SI-TEC™ DM 1000) 2.00 ISPPHASE CCyclopentasiloxane (SI-TEC™ CM 040) 7.50 ISPPHASE DDiazolidinyl Urea (and) Iodopropynyl Butylcarbamate (GERMALL® PLUS) 0.50 ISPPHASE EDisodium LauriminodipropionateTocopheryl Phosphates (VITAL™ ET) 5.00 ISPPHASE FSilica (SB 700 Silica Beads) 1.00 US CosmeticsMica (and) Iron Oxides (Cloisonne Super Bronze) 4.30 EngelhardMica (and) Iron Oxides (Cloisonne Super Copper) 1.10 Engelhard

---------- 100.00%

PROCEDURE1. Heat water to 75ºC; add remaining ingredients of Phase A. (pre-wet gums with the Butylene Glycol)2. Add Phase B (70-75ºC) to Phase A at 75ºC. (use homo-mixer). Homogenize for 10 minutes.3. Cool to 55ºC while slow homo-mixing; add Phases C&D (pre-mixed). Mix until uniform.4. Add Phase E to batch; mix until uniform.5. Switch to sweep-mixing. Continue sweep-mixing to RT.6. Add Phase F while sweep-mixing. Avoid aerating batch. Mix until uniform. 3/03EB

pH = 5.79 Viscosity = 36,000 cps (Brookfield Model RVT, TC @ 5 RPM)This formula has passed a 28-day double challenge efficacy test. However, the preservative system has not been Optimized.

HEALTHY SKIN GLOW COLOR with VITAL™ ET“Bronze”

Formula #: 10889-109-1