Skillsfirst Awards Handbook Level 3 Diploma in ICT ... · The Level 3 Diploma in ICT Professional...
Transcript of Skillsfirst Awards Handbook Level 3 Diploma in ICT ... · The Level 3 Diploma in ICT Professional...
Suite 416Fort DunlopFort ParkwayBirminghamB24 9FD www.skillsfirst.co.uk
Skillsfirst Awards
Handbook
Level 3 Diploma in ICT Professional Competence
(QCF)
IPCD3
1 IPCD3 V3.1 08072015
Contents Page Section 1 – Introduction 2 Section 2 – Skillsfirst Awards Limited 2.1 Data protection 2 2.2 Equality and accessibility 2 2.3 Enquiries and information sources 3 2.4 Complaints and appeals 3 2.5 Malpractice and maladministration 4 Section 3 – The sector skills council for ICT 3.1 The Tech Partnership 4 3.2 Occupational expertise of those who assess performance, and moderate and verify assessments 5 3.3 Employer direct model 5 3.4 Continuous professional development 6 Section 4 – Summary of assessment methods 4.1 Assessment principles 6 4.2 Characteristics of assessment guidance 7 4.3 Simulation and witness testimony 8 4.4 Recognition of prior learning (RPL) 8 Section 5 – Qualification information 5.1 What is the qualification and credit framework (QCF) 9 5.2 QCF units 9 5.3 QCF terminology 10 5.4 Availability of qualifications 10 5.5 Qualification aim and design 10 Section 6 – Qualification structure 6.1 Number of credits required for this qualification 10 6.2 The rules of combination 10 6.3 List of available units and their credit value 11 6.4 Learner entry requirements 14 6.5 Progression opportunities 14 Section 7 – The units of learning 7.1 Structure of the units 14 7.2 Group M – mandatory units 15 7.3 Group O – optional units 22
2 IPCD3 V3.1 08072015
1.0 Introduction
1.1 Skillsfirst Awards is an awarding organisation specialising in the provision of vocational qualifications across a range of occupational areas.
1.2 Skillsfirst Awards recognises the need for industry to have fully trained and qualified staff
– reliably qualified to recognised industry standards. 1.3 The following handbook provides the learning outcomes and assessment strategy for the
delivery of the Level 3 Diploma in ICT Professional Competence (QCF). The handbook is a live document and will be updated should there be any incremental change made. Centres will be informed electronically when changes are made and it will be the responsibility of any recognised centre to ensure the most up to date version of the handbook is used. The document also provides details of the administrative procedures, requirements and responsibilities that are associated with the delivery of vocational qualifications.
The handbook is available on the Skillsfirst Awards website www.skillsfirst.co.uk 1.4 This document is copyright but can be copied by any of our recognised centres for the
purpose of assessing learners and may also be copied by learners for their own use.
1.5 All learners should be provided with a copy of the Skillsfirst qualification handbook together with the Skillsfirst learner guide. This document can be found on our web-site at www.skillsfirst.co.uk
2.0 Skillsfirst Awards 2.1 Data protection
Skillsfirst Awards takes the protection of data seriously and to this end has developed a data protection statement outlining how Skillsfirst and our centres, comply with the current legislation on data protection. It is important for centres to read our statement and ensure that our requirements are put in place. It is particularly important that centres make learners aware that data is shared with Skillsfirst Awards. Our policy statement on this and data requirements can be found in our centre handbook on our website www.skillsfirst.co.uk 2.2 Equality and accessibility Equality and accessibility Skillsfirst is committed to giving everyone who wants to gain one of our qualifications an equal opportunity of achieving it in line with current UK legislation and EU directives including the Equality Act 2010 (Amendment) Order 2012 and to ensure this occurs, has in place a policy on equality and accessibility which can be found on our website www.skillsfirst.co.uk and within our centre handbook. Skillsfirst will ensure that centres use a equality and accessibility policy that works together with ours and that they maintain an effective appeals procedure which along with the equality and accessibility policy, will be monitored by the external verifier. We expect centres to tell learners how to find and use their own equality and accessibility and appeals procedures.
3 IPCD3 V3.1 08072015
Access to assessment Skillsfirst Awards is committed to guaranteeing all learners are treated fairly and equally and to ensure this occurs, has in place a policy on reasonable adjustments and special considerations. This policy states clearly what centres can and in some cases must, put in place to assist learners who may have particular requirements. We expect centres to tell learners how to find and use their own reasonable adjustments and special considerations policy and will monitor implementation through the external verification process. This policy can be accessed at www.skillsfirst.co.uk and within our centre handbook. Further advice on this policy and its application can be obtained from our customer services team at [email protected] 2.3 Enquiries and information sources Skillsfirst aims to provide accurate information in a variety of formats and media. Recognised centres are encouraged to make enquiries to the customer services team, or seek clarification from our website. Learners wishing to enquire about qualifications, aspects of qualifications or quality assurance policies and procedures are encouraged, in the first instance, to seek information from the recognised centre or their tutor/assessor. Where a satisfactory answer is unavailable, learners are encouraged to seek clarification from our website, or from the Skillsfirst customer services team. As a guide, the majority of frequently requested information is available on our website or on request via the electronic helpline listed below. Website: www.skillsfirst.co.uk email: [email protected] Tel: 0121 270 5100 Fax: 0121 747 4102 In writing to: Customer Services Skillsfirst Awards Limited Suite 416 Fort Dunlop Fort Parkway Birmingham B24 9FD 2.4 Complaints and appeals Complaints
Skillsfirst Awards will endeavour at all times to satisfy our customer’s needs and ensure a quality service. There may be times when our centres do not feel we have met these needs. Should they wish, centres may complain in writing to the Skillsfirst Awards customer services manager. We will attempt to resolve all complaints within the published timescales and will record and review all complaints as part of our ongoing customer service commitment.
4 IPCD3 V3.1 08072015
Appeals
Skillsfirst Awards aims to ensure that at all times its decisions are fair, consistent and based on valid judgements. However, it is recognised that there may be occasions when a centre or a learner may wish to question a decision made. Skillsfirst Awards therefore has an appeals policy and process which clearly indicates the rights of the centre and the learner to appeal against a range of decisions taken by Skillsfirst. The Skillsfirst Awards appeals policy and process can be accessed on our website www.skillsfirst.co.uk and within our centre handbook. Centres are required to have a documented policy and procedure which allows learners to question decisions made by the centre. The final stage of such a procedure may be to appeal to the Skillsfirst Awards external verifier. This policy would form part of the original centre recognition process and its implementation will be monitored by the external verifier. 2.5 Malpractice and maladministration Skillsfirst Awards has a responsibility to ensure that malpractice and maladministration is addressed effectively and to publish procedures to centres for dealing with malpractice on the part of learners, centre staff and any others involved in providing the qualification. To meet this requirement, Skillsfirst Awards has a malpractice policy and process, the details of which can be accessed on our website www.skillsfirst.co.uk 3.0 The sector skills council for ICT 3.1 The Tech Partnership The Level 3 Diploma in ICT Professional Competence (QCF) is based on the units developed by e-skills who are now known as The Tech Partnership who are the sector skills council for ICT. Their contact details are: The Tech Partnership 1 Castle Lane London SW1E 6DR [email protected] This handbook provides details from e-skills assessment strategy, which centres will need to apply in order to assess and quality assure the Level 3 Diploma ICT Professional Competence (QCF). and includes the:
occupational expertise of those who assess performance, and moderate and verify assessments
continuous professional development
summary of assessment methods The complete assessment strategy is available for view and to download from the website https://www.thetechpartnership.com/
5 IPCD3 V3.1 08072015
3.2 Occupational expertise of those who assess performance, and moderate and verify assessments Assessors and internal verifiers (IVs are appointed by the recognised centre and approved by Skillsfirst through the external verifier (EV)). Assessors and IVs should:
be occupationally knowledgeable and technically competent in the area of ICT Systems Installation and Maintenance, Developing Software or Project Management for which they are delivering training and/or have experience of providing training. This knowledge must be at least to the same level as the training being delivered. This could be verified by:
curriculum vitae and references
possession of a relevant qualification
corporate membership of a relevant professional institution
hold the Level 3 Diploma for ICT Professionals, or an equivalent qualification
have sufficient occupational expertise so they have up to date knowledge and experience of the particular aspects of work they are assessing or verifying. This could be confirmed by records of continuing professional development (CPD) achievements.
be prepared to participate in training activities for their CPD.
have a sound in-depth knowledge of, and uphold the integrity of, the National Occupational Standards (NOS, units of assessment and the e-Skills assessment principles)
be employed directly or contractually by the same centre as the learner or
be acting as a counter signatory on a short-term basis for a maximum period of 18 months, where the assessor/IV has not achieved the relevant award.
Centre staff may undertake more than one role, eg tutor and assessor or internal verifier, but must never internally verify their own assessments. Internal verifiers The IV is responsible for the approved centre’s assessment quality. Therefore, in addition to the above, IVs must also:
provide evidence of knowledge, understanding and application of the regulatory authorities’ code of practice
undertake CPD to ensure that they are working to the current NOS in assessment and verification
only verify the decisions of assessors which fall within their acknowledged area of technical and occupational competence.
While the Assessor/Verifier (A/V) units are valued as qualifications for centre staff, they are not currently a requirement for the qualification. Where employers opt for an ‘employer direct’ model (described below) the qualification requirement may be waived. 3.3 Employer direct model Where employers opt for an ‘employer direct’ model, the qualification requirements for assessors and internal verifiers may be waived.
6 IPCD3 V3.1 08072015
The employer direct’ model is where colleagues, supervisors and/or managers in the workplace are involved in the assessment process. Under this model, the employer, with the agreement of Skillsfirst may choose between:
achieving the appropriate approved qualifications for assessment/verification or
demonstrating that their (the employer’s training and development activity undertaken to prepare, validate and review these assessment roles, maps 100% to the National Occupational Standards which these qualifications are based on. The mapping process must be agreed by Skillsfirst as providing the equivalent level of rigour and robustness as achievement of the approved assessment/verification qualification.
Each application to use the employer direct model will be considered on an individual organisation and qualification basis. Prospective organisations must be able to confirm that their in-house practices conform to the requirements of the standards in association with Skillsfirst. 3.4 Continuous professional development Centres are responsible for ensuring that assessors and IVs plan and maintain their CPD. Centres are expected to support their assessors and IVs in ensuring that their knowledge remains current of the occupational area and of best practice in delivery, mentoring, training, assessment and verification, and that it takes account of any national or legislative developments. Centres may have generic criteria and personnel specifications in addition to the above. 4.0 Summary of delivery and assessment methods For this qualification, learners will be required to provide a portfolio of evidence for each unit. 4.1 Recommended delivery strategies Centre staff should familiarise themselves with the structure, content and assessment requirements of the qualification before designing a course programme. Centres may design course programmes of study in any way which:
best meets the needs and capabilities of their learners and
satisfies the requirements of the qualification. When designing and delivering the course programme, centres might wish to incorporate other teaching and learning that is not assessed as part of the qualification. This might include the following:
literacy, language and/or numeracy
personal learning and thinking
personal and social development
employability Where applicable, this could involve enabling the learner to access relevant qualifications covering these skills.
7 IPCD3 V3.1 08072015
4.2 Characteristics of assessment guidance
The learner may produce evidence from a range of examples (as outlined above) which should be recorded in some form. A record of evidence will confirm to the assessor their confidence in the learner’s breadth and depth of knowledge and understanding in being able to competently meet the functional requirements of all the units. The assessor will need to be assured that the learner can:
meet all the learning outcomes of a unit
achieve all the assessment criteria of a unit An assessor may request additional evidence if they are not satisfied with the evidence presented by the learner. If this occurs, it may need to be agreed in partnership with the learner and the assessor. Professional discussion Professional discussion is encouraged as a supplementary form of evidence to confirm a learner’s competence. Such discussions should not be based on a prescribed list of questions but be a structured discussion which enables the assessor to gather relevant evidence to ensure the learner has a firm understanding of the standard being assessed. Realistic working environment (RWE) Assessment of this qualification should ideally be carried out within the workplace, however, where this is not possible learners can be assessed within an approved RWE that replicates a real work setting. It is essential for organisations operating an RWE to ensure it reflects current and real work settings. By doing so, sector employers can be confident that competence achieved in an RWE will be continued into employment. RWEs can offer many opportunities to employers and individuals that have limited access to assessment. The number of hours learners work and their input in not prescribed, as it is acknowledged that RWEs cannot operate without some flexibility. However, Centres must provide evidence that the following criteria are being met as well as fulfilling the Skillsfirst criteria for this purpose. The work situation being represented is relevant to this qualification as follows:
the type of work mirrors the relevant unit outcomes being assessed.
appropriate equipment and resources (both hardware and software replicate the work being undertaken, ensuring that assessment requirements can be covered.
industry trends are considered in the product and service offer. The learner’s work activities reflect those found in the situation being represented, i.e.
learners operate in a professional capacity with corresponding job schedules and/or descriptions.
learners are clear on their work activities and responsibilities. The RWE is operated in the same manner as a real work situation, i.e.
customers are not prompted to behave in a particular manner.
customer feedback received is maintained and acted upon. The RWE is under-pinned by commercial principles and responsibilities including:
organisational charts which indicate the anticipated job roles in the RWE and their hierarchical structure taking into account supervisory requirements
8 IPCD3 V3.1 08072015
evidence of business planning, for example product/service plans, staffing/rotas, costing, promotions
learners being encouraged to carry out their function in line with business expectations, e.g. within timescales and budget, minimising wastage
Ensuring that legislative regulations are adhered to e.g. health and safety,
4.3 Simulation and witness testimony Simulation or witness testimony is warranted where the centre can demonstrate that performance evidence has been impossible to obtain in the work environment. Simulation Simulation can only be used to assess learners where the opportunity to assess naturally occurring evidence is unlikely or not possible, for example assessment relating to health and safety, fire and emergency procedures. It should not include routine activities that must be covered by performance evidence. There are no units that can be solely achieved by simulation. In the case of imported units, where simulation is acceptable in the evidence requirements, it should only be used when performance evidence is unlikely to be generated through normal working practices. Witness testimony Skillsfirst recognise the use of witness testimony and expert witness testimony as appropriate methods for assessors to collect evidence on candidate’s performance. Witness testimonies can be obtained from people that are occupationally competent and who may be familiar with the national occupational standards, such as the learner’s line manager. They may also be obtained from people who are not occupationally competent and do not have a knowledge of the national occupational standards such as other people within the learner’s workplace, customers and suppliers. The assessor must judge the validity of the witness testimony and these may vary depending on the source. Witness testimonies can only support the assessment process and may remove or reduce the need to collect supplementary evidence. However, centres must comply with Skillsfirst guidance over the occupational competence and briefing of witnesses in the use of witness testimony. 4.4 Recognition of prior learning (RPL) RPL recognises how the contribution of a learner’s previous experience could contribute to a qualification. Should any opportunities for RPL be identified, it is important that a complete process of recognising prior experience and learning is undertaken, by ensuring that:
it covers relevant or appropriate experience for previous activities, as well as accredited learning and qualifications
it is incorporated into the assessment planning, with details of how this will take place
mapping of prior learning to the national occupational standards to identify gaps is documented and auditable
assessment methods or processes for recognising prior experience and learning, are documented and made available to the external verifier
the audit trail covers the whole process and methodology of RPL
the authenticity and currency of presented evidence is established by the assessor
9 IPCD3 V3.1 08072015
where observation or expert witness testimony is a unit assessment method requirement, this activity is undertaken after learner registration for the qualification
In considering the appropriateness of any single piece of evidence, the following should be considered:
Content – the degree to which the content of any previous accredited learning meets the requirements of the national occupational standards against which it is being presented as evidence.
Performance and knowledge – the degree to which the previous learning covered both performance and knowledge. Some learning will only have offered and tested the latter, in which case RPL will only recognise the meeting of knowledge requirements. Performance will require further assessment. Although unlikely, the reverse (performance tested but not knowledge could be true in which case knowledge and understanding would need further assessment.
Relevance of context – the degree to which the context of the learning gained and assessed, relates to the current context of learner’ work roles. If the context was different, assessors will need to satisfy themselves of learners’ ability to transfer the learning gained into their current setting.
Currency – how recently the learning was gained. Learners would need to demonstrate current knowledge and understanding of areas such as legislation, policy and practice etc, which may have changes since the previous learning programmes were undertaken.
Authenticity – how the ownership of the evidence is established to ensure it was generated by the learner.
5.0 Qualification information 5.1 What is the qualification and credit framework? The qualification and credit framework (QCF) is a new way of recognising achievement through the award of credit for units and qualifications. It will provide flexible routes to gaining full qualifications and enable qualifications to be achieved in smaller steps. Units within the framework will have a level (ranging from entry level to level 8) to indicate the level of difficulty. They will also have a credit value to indicate the size of the unit. The QCF will:
allow providers to design more flexible programmes, suited to the needs of a wider range of learners
describe achievements (credits) to employers, providers and learners in a way that is easy to understand
allow learners to accumulate credit, by recognising smaller steps of learning at their own pace
allow learners to transfer credits into an electronic learner achievement record, which they will keep for life
5.2 QCF units Each unit has a credit value based on the total number of hours of learning required to achieve it, (notional learning). Each 10 hours of learning equals 1 credit, for example, if a unit takes 30 hours of learning, it will receive a credit value of 3. The units vary in credit value. In addition all units have a level which may be different from the qualification in which they can be used.
10 IPCD3 V3.1 08072015
5.3 QCF terminology Whilst the evidence outcomes required from QCF and NVQ units are the same, the QCF units use different terminology to the NVQ units. The assessment criteria for NVQ units are listed under ‘what you must do’ and ‘what you must know’ whereas the QCF units are all listed under ‘the learner can’. 5.4 Availability of qualifications This handbook covers the Level 3 Diploma in ICT Professional Competence (QCF). To complete a qualification, the minimum credit value must be achieved and progressive qualifications at a higher level require more credit to be achieved. The number of units to achieve this is not fixed, as it is the total credit value that is required. Rules of combination apply to each qualification. Learners can accumulate credit which will allow them to claim award, certificate or diploma certification, as the qualification credit values are achieved. 5.5 Qualification aim and design The Level 3 Diploma in ICT Professional Competence (QCF) is aimed at those learners who are already working as, a systems analyst, system support technician, web designer or software developer. This qualification comprises two mandatory units and a wide range of optional units selected to meet national occupational standards or specific vendor requirements. This qualification has been designed to accredit the knowledge and understanding of practitioners in the IT industry. This qualification is most suitable for those who already possess basic knowledge and understanding of ICT and who wish to extend their knowledge and skills. This qualification also serves as a core component of the Level 3 Advanced Apprenticeship for IT, Software, Web & Telecoms Professionals. 6.0 Qualification structure 6.1 Number of credits required for this qualification Qual no. Level Qualification title Number of credits
IPCD3 3 Level 3 Diploma in ICT Professional
Competence (QCF) Minimum of 72
6.2 Rules of Combination
A minimum total of 72 credits must be achieved to gain the qualification as follows: At least 12 credits must be achieved from the mandatory Group M. A further 60 credits must be achieved from Group O. Only one unit per sub group can be taken, except for the vendor unit sub-group. A minimum of 37 credits must be at Level 3. Minimum Guided Learning Hours (GLH) are 451 Maximum Guided Learning Hours (GLH) are 558
11 IPCD3 V3.1 08072015
6.3 List of available units and their credit value The list below gives the unit titles, their level and the credit value of each unit. Group M - mandatory units
QCF unit no.
Skillsfirst unit no.
Level Unit title Credit value
Y/500/7183 HSICT1 1 Health and Safety in ICT
3
D/503/5549 DEP3 3 Develop own effectiveness and professionalism
9
Group O - optional units Customer care in ICT
QCF unit no.
Skillsfirst unit no.
Level Unit title Credit value
A/500/7158 CCICT2 2 Customer care in ICT
9
F/500/7159 CCICT3 3 Customer care in ICT
12
Computer games development
QCF unit no.
Skillsfirst unit no.
Level Unit title Credit value
A/601/3164 CGD2 2 Computer games development
4
F/601/3165 CGD3 3 Computer games development
10
Data
QCF unit no.
Skillsfirst unit no.
Level Unit title Credit value
L/601/3203 DM3 3 Data modelling
9
R/601/3297 DSA4 4 Data structures and algorithms
15
Database software
QCF unit no.
Skillsfirst unit no.
Level Unit title Credit value
T/502/4556 IT303 3 Database Software
6
12 IPCD3 V3.1 08072015
Technical fault diagnosis
QCF unit no.
Skillsfirst unit no.
Level Unit title Credit value
A/601/3293 TFD3 3 Technical fault diagnosis
12
T/601/3292 TFD2 2 Technical fault diagnosis
9
Fibre optics
QCF unit no.
Skillsfirst unit no.
Level Unit title Credit value
H/601/0663 FTT3 3 Fibre Telecommunications Techniques
15
Working with ICT hardware and equipment
QCF unit no.
Skillsfirst unit no.
Level Unit title Credit value
K/500/7382 WIHE2 2 Working with ICT hardware and equipment
9
Investigating and defining customer requirements for ICT systems
QCF unit no.
Skillsfirst unit no.
Level Unit title Credit value
R/601/3249 IDR3 3 Investigating and defining customer requirements for ICT systems
12
R/602/1772 IDR4 4 Investigating and defining customer requirements for ICT systems
15
Remote support for products and services
QCF unit no.
Skillsfirst unit no.
Level Unit title Credit value
D/500/7217 RSP3 3 Remote support for products and services
12
Systems architecture
QCF unit no.
Skillsfirst unit no.
Level Unit title Credit value
A/601/3505 SA4 4 Systems architecture
10
13 IPCD3 V3.1 08072015
Security of ICT Systems
QCF unit no.
Skillsfirst unit no.
Level Unit title Credit value
D/500/7220 SEC3 3 Security of ICT systems
12
H/500/7221 SEC4 4 Security of ICT systems
15
K/500/7219 SEC1 1 Security of ICT systems
3
Software installation and upgrade
QCF unit no.
Skillsfirst unit no.
Level Unit title Credit value
D/500/7329 SIU2 2 Software installation and upgrade
9
R/500/7330 SIU3 3 Software installation and upgrade
12
System operation
QCF unit no.
Skillsfirst unit no.
Level Unit title Credit value
A/500/7340 SO3 3 System operation
12
F/500/7338 SO2 2 ICT system operation
9
Technical advice and guidance
QCF unit no.
Skillsfirst unit no.
Level Unit title Credit value
F/601/3506 TAG2 2 Technical advice and guidance
9
J/601/3507 TAG3 3 Technical advice and guidance
12
Y/500/7345 TAG4 4 Technical advice and guidance
15
Testing ICT systems
QCF unit no.
Skillsfirst unit no.
Level Unit title Credit value
A/500/7354 TIS2 2 Testing ICT Systems
9
F/500/7355 TIS3 3 Testing ICT Systems
12
14 IPCD3 V3.1 08072015
Vendor units Microsoft units
QCF unit no.
Skillsfirst unit no.
Level Unit title Credit value
M/502/3650 MSC1 3 Configuring Windows Server 2008 Active Directory
13
J/502/3640 MSC2 3 Configuring Windows Server 2008 Network Infrastructure
11
J/502/3637 MSC3 3 Windows Server 2008 Server Administrator
11
A/602/6349 MSC4 2 MTA: security fundamentals
10
A/503/5249 MSC5 2 MTA: Microsoft .NET Fundamentals
10
A/602/6352 MSC6 2 MTA: Database Administration Fundamentals
10
F/602/6353 SMB7 2 MTA: Web Development Fundamentals
10
M/602/6347 MSC8 2 MTA: Software Development Fundamentals
10
T/602/6348 MSC9 2 MTA: Windows Development Fundamentals
10
6.4 Learner entry requirements Formal requirements There are no formal entry requirements for learners undertaking this qualification; however centres must ensure that learners have the potential and opportunity to gain evidence for the qualification in the work place. Age restrictions There are no age limits attached to learners undertaking this qualification unless this is a legal requirement of the process or the environment. 6.5 Progression opportunities On completion of the Level 3 Diploma in ICT Professional Competence (QCF), learners may progress into employment, higher education or onto higher level qualifications.
15 IPCD3 V3.1 08072015
7.0 The Units of Learning 7.1 Structure of the units The units which make up these qualifications are written in a standard format and comprise of:
Skillsfirst reference number
unit title
level and credit value
unit aim
learning outcomes
guided learning hours
relationship to NOS/other qualifications
endorsement of the unit
information on assessment
learning outcomes and assessment criteria
16 IPCD3 V3.1 08072015
7.2 Group M - mandatory units
17 IPCD3 V3.1 08072015
HSICT1
Health and Safety in ICT
18 IPCD3 V3.1 08072015
HSICT1 Health and Safety in ICT Level: 1 Credit value: 3 Unit aim This is compliance with Health & Safety legislation when working in ICT. The basis of health and safety law is the "Health and Safety at Work etc Act 1974". The Act sets out the general duties which employers have towards employees and members of the public, and employees have to themselves and to each other. Workplaces and work activities contain risks to the health and safety of workers and visitors alike. Health and Safety laws and regulations are intended to prevent injuries or ill health as a result of work. It is the duty of both employers and employees to follow the law and to comply with health and safety requirements. This standard requires the candidate to show understanding and compliance with health and safety requirements required in the workplace. Learning outcomes There is one outcome to this unit. The learner will: 1. Comply with relevant Health & Safety procedures
Guided learning hours It is recommended that 15 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards There is no direct link to the National Occupational Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
19 IPCD3 V3.1 08072015
HSICT1 Health and Safety in ICT Learning outcomes and assessment criteria Outcome 1 Comply with relevant Health & Safety procedures The learner can: 1 identify relevant organisational Health & Safety procedures 2 identify available sources of Health & Safety information 3 demonstrate how relevant Health & Safety procedures have been followed
20 IPCD3 V3.1 08072015
DEP3
Develop own effectiveness and professionalism
21 IPCD3 V3.1 08072015
DEP3 Develop own effectiveness and professionalism Level: 3 Credit value: 9 Unit aim This unit involves personal development, team working and awareness of IT professional practice and legislation. Learning outcomes There are five outcomes to this unit. The learner will: 1. Develop own personal and professional skills 2. Work as a member of a team to achieve defined goals and implement agreed plans 3. Understand what is meant by professional practice 4. Understand the ethical and legislative environment relating to IT activities 5. Improve organisational effectiveness Guided learning hours It is recommended that 45 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards There is no direct link to the National Occupational Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
22 IPCD3 V3.1 08072015
DEP3 Develop own effectiveness and professionalism Learning outcomes and assessment criteria Outcome 1 Develop own personal and professional skills The learner can: 1 identify own development needs and the activities needed to meet them 2 obtain and review feedback from others on performance 3 agree personal goals and participate in development activities to meet them Outcome 2 Work as a member of a team to achieve defined goals and implement
agreed plans The learner can: 1 effectively plan and manage own time 2 recognise and respect diversity, individual differences and perspectives 3 accept and provide feedback in a constructive and considerate manner 4 understand the responsibilities, interests and concerns of colleagues 5 identify and reduce obstacles to effective teamwork Outcome 3 Understand what is meant by professional practice The learner can: 1 describe the implications, and applicability for IT professionals of:
• Data Protection Act • Computer Misuse Act
2 identify the role of professional bodies for IT, and the benefits of membership to
individuals and organisations 3 describe quality management systems and standards for systems development Outcome 4 Understand the ethical and legislative environment relating to IT
activities The learner can: 1 identify the types of conflicts of interest which can arise for IT professionals 2 describe the impact on an IT organisation of legislation covering:
• Processing of financial transactions • Health and Safety • Privacy, Confidentiality and Security • Copyright and Intellectual Property Rights
Outcome 5 Improve organisational effectiveness The learner can: 1 describe the aims and objectives of the organisation 2 describe the organisation's brand or image and how it can be promoted 3 identify the organisation's structure, roles and responsibilities 4 identify potential improvements to organisational effectiveness
23 IPCD3 V3.1 08072015
7.3 Group O - Optional units
24 IPCD3 V3.1 08072015
CCICT2
Customer care in ICT
25 IPCD3 V3.1 08072015
CCICT2 Customer care in ICT Level: 2 Credit value: 9 Unit aim This is the identification of, and response to, customer needs to ensure customer satisfaction. This unit will typically involve direct customer contact. Typically this will involve:
a balance between customer needs and the needs of the organisation
monitoring of customer satisfaction through the use of formal and informal assessment techniques (e.g. surveys, feedback etc.)
handling and resolution of customer issues and complaints in a constructive manner that ensures customer satisfaction.
Learning outcomes There are two outcomes to this unit. The learner will: 1. Know how to provide customer care by establishing customer relationships 2. Provide customer care by establishing customer relationships Guided learning hours It is recommended that 30 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 4.8 – IT/Technology infrastructure design and planning of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
26 IPCD3 V3.1 08072015
CCICT2 Customer care in ICT Learning outcomes and assessment criteria Outcome 1 Know how to provide customer care by establishing customer
relationships The learner can: 1 describe the uses of interpersonal communication techniques such as:
• verbal (e.g. intonation, tone and feedback (sometimes referred to as verbal attends)) and non-verbal techniques (e.g. smiling while talking on the phone, body language).
• attentive listening (i.e. difference between hearing and listening). • positive and negative language. • active listening (e.g. summarising, paraphrasing, body language); • listening barriers (e.g. background noise, distractions, lack of concentration); • types of question (e.g. open, closed and probing).
2 describe the relevant parts of the organisational requirements for customer care
including;
• customer service procedures (e.g. how to log customer information, how to initiate service calls, how to complete a sale);
• authorisation procedures (e.g. how to confirm caller identity, how to validate requests);
• escalation, resolution and complaint handling; • quality assurance procedures; • compliance with relevant legislation and regulations (e.g. data protection,
financial services); • maintenance and communication of organisational brand or image; • organisational aims and objectives
3 describe what the implications of customer satisfaction are
• customer retention; • working relationships
4 describe the relevant methods of measuring customer satisfaction levels such as
• predefined formal feedback • unsolicited feedback; • anecdotal feedback
Outcome 2 Provide customer care by establishing customer relationships The learner can: 1 comply with organisational requirements 2 communicate interpersonally on familiar subjects such as:
• following organisational guidelines and procedures • articulating and expressing ideas clearly and concisely • listening actively (e.g. by taking notes) • clarifying and confirming understanding (e.g. by paraphrasing or repetition).
27 IPCD3 V3.1 08072015
• responding to questions with accurate information
• ensuring content is appropriate to the needs of the audience • identifying and avoiding listening barriers • maintaining focus on the purpose of the communication
3 providing customer interaction such as;
• focuses on addressing customer needs • interacts in a sensitive and helpful manner with the customer. • responds to customer requests on time, accurately, pleasantly and
professionally • builds a trusting relationship with the customer • keeps self and customer focused • maintains consistent communication style
4 provide service delivery such as;
• recognising own limitations; • escalating customer issues following organisational requirements • meets own commitments to customers; • follows up customer problems and issues
5 handle complaints from customers such as;
• using probing questions; • displaying patience and understanding with demanding or emotional
customers 6 gather specified customer satisfaction information
28 IPCD3 V3.1 08072015
CCICT3
Customer care in ICT
29 IPCD3 V3.1 08072015
CCICT3 Customer care in ICT Level: 3 Credit value: 12 Unit aim Learners will be able to analyse customer types and requirements, whilst managing customer expectations. Research the varying workplace cultures that exist and apply communication techniques. Learning outcomes There are three outcomes to this unit. The learner will: 1. Understand how to provide ICT customer care by developing customer relationships 2. Be able to provide ICT customer care by developing customer relationships 3. Be able to contribute to improving the delivery of service Guided learning hours It is recommended that 100 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 4.8 – IT/Technology infrastructure design and planning of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
30 IPCD3 V3.1 08072015
CCICT3 Customer care in ICT Learning outcomes and assessment criteria Outcome 1 Understand how to provide ICT customer care by developing customer
relationships The learner can: 1 describe the uses of interpersonal communication techniques 2 explain the different approaches and methods used for supporting technical and non-
technical customers 3 describe the organisational requirements for ICT customer care 4 explain the effect of ICT customer care on the rest of the organisation Outcome 2 Be able to provide ICT customer care by developing customer
relationships The learner can: 1 monitor compliance with organisational requirements for ICT customer support 2 follow organisational guidelines and procedures to communicate with customers 3 interact effectively with customers to achieve agreed outcome Outcome 3 Be able to contribute to improving the delivery of service The learner can: 1 describe the implications of customer satisfaction for the business 2 describe the methods of measuring customer satisfaction levels 3 suggest improvements to ICT service delivery 4 handle complaints from customers following organisational guidelines 5 gather specified customer satisfaction information 6 analyse specified customer satisfaction information 7 report on specified customer satisfaction information
31 IPCD3 V3.1 08072015
Computer games development
32 IPCD3 V3.1 08072015
CGD2
Computer games development
33 IPCD3 V3.1 08072015
CGD2 Computer games development Level: 2 Credit value: 4 Unit aim This unit introduces computer game components and the computer games industry. It also covers the fundamentals of developing computer games. Learning outcomes There are three outcomes to this unit. The learner will: 1. Know computer game components and the computer games industry 2. Know how to develop a computer game specification 3. Implement a component of a computer game
Guided learning hours It is recommended that 28 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 5.2 – Software development of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
34 IPCD3 V3.1 08072015
CGD2 Computer games development Learning outcomes and assessment criteria Outcome 1 Know computer game components and the computer games industry The learner can: 1 identify the hardware and software components of a video game system 2 identify the activities required to develop modern computer games 3 describe the features of an existing computer game Outcome 2 Know how to develop a computer game specification The learner can: 1 contribute to the production of a pre-production proposal document for a computer game
project 2 identify the components required to develop a computer game 3 contribute to the productions of an implementation plan for a computer game
development Outcome 3 Implement a component of a computer game The learner can: 1 design a component of a computer game 2 develop a component of a computer game
35 IPCD3 V3.1 08072015
CGD3
Computer games development
36 IPCD3 V3.1 08072015
CGD3 Computer games development Level: 3 Credit value: 10 Unit aim This unit provides detailed coverage of computer games architecture and components and also the computer games industry. It also involves the evaluation, specification and implementation of computer games. Learning outcomes There are five outcomes to this unit. The learner will: 1. Understand computer game architecture and components 2. Understand the computer games industry 3. Be able to evaluate existing computer games 4. Develop a computer game specification 5. Implement elements of a computer game
Guided learning hours It is recommended that 71 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 5.2 – Software development of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
37 IPCD3 V3.1 08072015
CGD3 Computer games development Learning outcomes and assessment criteria Outcome 1 Understand computer game architecture and components The learner can: 1 describe the hardware and software components of a video game system Outcome 2 Understand the computer games industry The learner can: 1 describe the stages of evolution of computer game industry 2 describe the roles and activities required to develop modern computer games 3 explain computer game development processes and terminology 4 explain computer game programming methods and techniques Outcome 3 Be able to evaluate existing computer games The learner can: 1 produce a structured evaluation of an existing computer game Outcome 4 Develop a computer game specification The learner can: 2 produce a pre-production proposal document for a computer game project 3 identify the components required to develop a computer game 4 produce an implementation plan for a computer game development Outcome 5 Implement elements of a computer game The learner can: 1 design components of a computer game 2 develop components of a computer game 3 test components of a computer game
38 IPCD3 V3.1 08072015
Data
39 IPCD3 V3.1 08072015
DM3
Data modelling
40 IPCD3 V3.1 08072015
DM3 Data Modelling Level: 3 Credit value: 9 Unit aim This unit covers the use of logical data modelling techniques, including normalisation, in the design of data structures for computer systems. Learning outcomes There are three outcomes to this unit. The learner will: 1. Understand the concepts of logical data modelling 2. Use data modelling techniques to create logical data models 3. Use data modelling techniques to refine logical data models Guided learning hours It is recommended that 75 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 4.5 – Data design of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
41 IPCD3 V3.1 08072015
DM3 Data Modelling Learning outcomes and assessment criteria Outcome 1 Understand the concepts of logical data modelling The learner can: 1 describe entities and the types of attributes which can be assigned to them 2 describe the type of relationships which can exist between entities 3 explain the objectives of data normalisation and describe the Third Normal Form (3NF) 4 explain the purpose of keys 5 describe an application where un-normalized or de-normalised data may be used 6 describe the types of standard notation which can be used to represent data sets as
logical data models Outcome 2 Use data modelling techniques to create logical data models The learner can: 1 identify and name entities, assigning the correct attributes 2 identify and represent entity relationships, assigning the correct type 3 normalise a data set to Third Normal Form (3NF) Outcome 3 Use data modelling techniques to refine logical data models The learner can: 1 identify entities which will be accessed for enquiry and/or update 2 identify access sequences and triggers 3 create access rules/methods 4 use a standard notation to describe the logical data model of a normalised data set
42 IPCD3 V3.1 08072015
DSA4
Data structures and algorithms
43 IPCD3 V3.1 08072015
DSA4 Data structures and algorithms Level: 4 Credit value: 15 Unit aim The aim of this unit is to provide the learner with an understanding of the importance of data structures and algorithms associated with data. In order to do this the learner will be able to define the terminology used and describe the elements of data structures. They will also understand the operation of established algorithms and how to describe and implement data structures in algorithms in non-executable and executable programmes. Learning outcomes There are six outcomes to this unit. The learner will: 1. Understand the structure and uses of various data structures and their associated
algorithms 2. Understand the operation of established algorithms 3. Select appropriate data structures and associated algorithms for specified problems 4. Describe the data structures and associated algorithms in a non-executable program
specification language 5. Implement data structures and algorithms in an executable programming language 6. Understand how strings are structured and processed Guided learning hours It is recommended that 90 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 4.5 – Data design of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
44 IPCD3 V3.1 08072015
DSA4 Data structures and algorithms Learning outcomes and assessment criteria Outcome 1 Understand the structure and uses of various data structures and their
associated algorithms The learner can: 1 define the terminology used to describe the elements of data structures including arrays,
linked lists, stacks, queues, trees, graphs and sets 2 explain how one-dimensional and multi-dimensional arrays are structured and
processed 3 explain how linked lists (including singly, doubly and circular linked lists) are structured
and processed 4 explain how stacks and queues are structured and processed 5 explain how trees and graphs are structured and processed 6 explain how sets are structured and processed
Outcome 2 Understand the operation of established algorithms The learner can: 1 explain the operation and performance of sorting and search algorithms 2 explain the operation of recursive algorithms and identify situations when recursion is
used Outcome 3 Select appropriate data structures and associated algorithms for
specified problems The learner can: 1 given a specified problem, choose a data structure and associated algorithm and justify
the selection Outcome 4 Describe the data structures and associated algorithms in a non-
executable program specification language The learner can: 1 specify the structure and associated algorithms of arrays, linked lists, stacks, queues,
trees, graphs and sets in well-established specification languages 2 specify the behaviour of sorting, searching and recursive algorithms using well-
established specification languages 3 demonstrate the operation of data-structures and algorithms by hand execution of the
associated algorithms with specified test data Outcome 5 Implement data structures and algorithms in an executable
programming language The learner can: 1 implement arrays, linked lists, stacks, queues, trees, graphs and sets in the context of
well-defined problems in an executable programming language 2 implement sorting, searching and recursive algorithms in the context of well-defined
problems in an executable programming language 3 demonstrate the correct operation of data structure algorithms implemented in an
executable programming language by devising and executing testing strategies
45 IPCD3 V3.1 08072015
Outcome 6 Understand how strings are structured and processed The learner can: 1 explain the structure of strings 2 identify common string operations 3 demonstrate the outcome of string operations on specified strings
46 IPCD3 V3.1 08072015
Database software
47 IPCD3 V3.1 08072015
IT303
Database software
48 IPCD3 V3.1 08072015
IT303 Database software Level: 3 Credit value: 6 Unit aim The aim of this unit is to provide the learner with some fundamental database concepts. The learner will create a database for a given purpose, decide upon its structure and any relationships. The learner will then enter data and perform searches to test the structure of the database using queries. The learner will also learn how to perform reports and generate them using predefined settings using software tools. Learning outcomes There are three outcomes to this unit. The learner will: 1. Plan, create and modify relational database tables to meet requirements 2. Enter, edit and organise structured information in a database 3. Use database software tools to create, edit and run data queries and produce reports Guided learning hours It is recommended that 45 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 4.5 – Data design of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
49 IPCD3 V3.1 08072015
IT303 Database software Learning outcomes and assessment criteria Outcome 1 Plan, create and modify relational database tables to meet requirements The learner can: 1 explain how a relational database design enables data to be organised and queried 2 plan and create multiple tables for data entry with appropriate fields and properties 3 set up and modify relationships between database tables 4 explain why and how to maintain data integrity 5 respond appropriately to problems with database tables 6 use database tools and techniques to ensure data integrity is maintained Outcome 2 Enter, edit and organise structured information in a database The learner can:
1 design and create forms to access, enter, edit and organise data in a database 2 select and use appropriate tools and techniques to format data entry forms 3 check data entry meets needs, using IT tools and making corrections as necessary 4 respond appropriately to data entry errors Outcome 3 Use database software tools to create, edit and run data queries and
produce reports The learner can: 1 explain how to select, generate and output information from queries according to
requirements 2 create and run database queries to display, amend or calculate selected data 3 plan and produce database reports from a multiple-table relational database 4 select and use appropriate tools and techniques to format database reports 5 check reports meet needs, using IT tools and making corrections as necessary
50 IPCD3 V3.1 08072015
Technical fault diagnosis
51 IPCD3 V3.1 08072015
TFD3
Technical fault diagnosis
52 IPCD3 V3.1 08072015
TFD3 Technical fault diagnosis Level: 3 Credit value: 12 Unit aim The aim of this unit is to enable the learner to understand the processes involved in technical fault diagnosis. In order to do that the learner will be able to identify the steps involved in providing a diagnosis, including identifying the steps involved in validating the fault and gathering information. The learner will also understand how to use different diagnosing tools. They will explore, in depth, the steps involved in diagnosing faults and what to do when they need to escalate the issue. The learner will diagnose faults with a wide range of causes, and select remedies for non-routine faults and understand the importance of maintaining records. Learning outcomes There are four outcomes to this unit. The learner will: 1. Understand the processes, methods and information that are used in the diagnostic
process 2. Be able to diagnose faults with a wide range of causes 3. Select remedies for non-routine faults 4. Maintain diagnosis and remedy records Guided learning hours It is recommended that 75 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 7.5 - IT/Technology management and support of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
53 IPCD3 V3.1 08072015
TFD3 Technical fault diagnosis Learning outcomes and assessment criteria Outcome 1 Understand the processes, methods and information that are used in
the diagnostic process The learner can: 1 describe the steps of the diagnostic process including:
• fault validation • information gathering • information analysis • solution identification
2 describe the types of diagnostic information that are commonly needed:
• problem description • problem history • problem location • technical information on a specified range of products including the system
under investigation 3 explain the following diagnostic methods and give examples of their appropriate use:
• substitution • replication • performance and functional testing • environment change
4 explain how the following considerations can affect fault diagnosis.
• minimisation of service disruption during diagnostics • individual responsibility and authority • escalation procedure • service level agreements
5 interpret detailed technical information on a range of products Outcome 2 Be able to diagnose faults with a wide range of causes The learner can: 1 select and correctly use appropriate diagnostic tools to carry out non-routine diagnosis. 2 select and use given sources of diagnostic and other technical information 3 identify and interpret relevant information to support the diagnosis 4 analyse information to diagnose faults with a wide range of causes, using at least three
of the following approaches: • trend analysis • what-if scenarios • gap analysis • identification of cause and effect • flow charts
5 describe possible ways to prevent reoccurrence of diagnosed faults
54 IPCD3 V3.1 08072015
Outcome 3 Select remedies for non-routine faults The learner can: 1 select a suitable remedy to rectify identified faults taking into account the following:
• business or service impact • resource and skill availability • ease of implementation • cost effectiveness • performance • compatibility • time • permanence
2 identify possible ways to prevent reoccurrence of diagnosed faults Outcome 4 Maintain diagnosis and remedy records The learner can: 1 accurately document the diagnosis activities undertaken including:
• fault description • supporting information • diagnostic tools etc used • cause of fault • remedy selected
55 IPCD3 V3.1 08072015
TFD2
Technical fault diagnosis
56 IPCD3 V3.1 08072015
TFD2 Technical fault diagnosis Level: 2 Credit value: 9 Unit aim The aim of this unit is to enable the learner to understand the process involved in technical fault diagnosis. In order to do this the learner will understand how to identify the steps involved in providing a diagnosis including validating the fault and gathering information regarding the fault. The learner will also be able to understand how to use different diagnosing tools. The learner will also be able to identify and apply remedies to identified faults. Learning outcomes There are four outcomes to this unit. The learner will: 1. Know the process, methods and information that are used in the diagnostic process 2. Apply processes to diagnose faults with a known range of causes and assist in the
diagnosis of other faults 3. Select fault remedies from given alternatives 4. Maintain diagnosis and remedy records Guided learning hours It is recommended that 45 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 7.5 - IT/Technology management and support of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
57 IPCD3 V3.1 08072015
TFD2 Technical fault diagnosis Learning outcomes and assessment criteria Outcome 1 Know the process, methods and information that are used in the
diagnostic process The learner can: 1 identify the steps of the diagnostic process including:
• fault validation • information gathering • information analysis • solution identification
2 describe the types of diagnostic information that are commonly needed and their
purpose 3 describe common diagnostic methods to include:
• substitution • replication • performance and functional testing • environment change
4 list typical considerations affecting fault diagnosis, e.g.
• minimisation of service disruption during diagnostics • individual responsibility and authority • escalation procedure • level of service
Outcome 2 Apply processes to diagnose faults with a known range of causes and
assist in the diagnosis of other faults The learner can: 1 correctly use appropriate diagnostic tools e.g.
• electrical/electronic test instruments • on-board self-test programs • loopback devices • on-line/remote monitoring • diagnostic software
2 effectively use given sources of information to support diagnosis 3 analyse information to identify the cause of faults, using two of the following
approaches: • gap analysis • identification of cause and effect • flow charts
Outcome 3 Select fault remedies from given alternatives The learner can: 1 select, from given alternatives, a suitable remedy to rectify identified faults taking into
account the following: • business or service impact • resource and skill availability • ease of implementation
2 identify possible ways to prevent reoccurrence of diagnosed faults
58 IPCD3 V3.1 08072015
Outcome 4 Maintain diagnosis and remedy records The learner can: 1 accurately document the diagnosis activities undertaken including:
• fault description • supporting information • diagnostic tools etc used • cause of fault • remedy selected
59 IPCD3 V3.1 08072015
Fibre optics
60 IPCD3 V3.1 08072015
FTT3
Fibre telecommunications techniques
61 IPCD3 V3.1 08072015
FTT3 Fibre telecommunications techniques Level: 3 Credit value: 15 Unit aim The aim of this unit is to provide the learner with an understanding of the properties, structures and components included in typical fibre telecommunications networks and how to work safely when installing optical fibre components in exchanges and customer premises. The unit will also enable the learner to build an external fibre network and know how to construct and re-enter a fibre closure. Learning outcomes There are six outcomes to this unit. The learner will: 1. Understand the properties, structures and components included in typical fibre
telecommunications networks 2. Understand safe working practices s when working with optical fibre networks 3. Know the quality standards and documentation requirements when working on the
optical fibre network 4. Prepare and install optical fibre components in exchanges and customer premises 5. Build an external fibre network 6. How to construct and re-enter a fibre closure Guided learning hours It is recommended that 80 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 4.8 - IT/Technology infrastructure design and planning of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
62 IPCD3 V3.1 08072015
FTT3 Fibre telecommunications techniques Learning outcomes and assessment criteria Outcome 1 Understand the properties, structures and components included in
typical fibre telecommunications networks The learner can: 1 identify different types of optical fibre 2 identify the physical components required to build a fibre infrastructure 3 explain the different structures used in fibre networks, and when different structures
should be used Outcome 2 Understand safe working practices s when working with optical fibre
networks The learner can: 1 identify key safety considerations when working with optical fibre 2 identify any existing risk assessments for working with fibre networks 3 explain how to dispose of redundant or damaged optical fibres Outcome 3 Know the quality standards and documentation requirements when
working on the optical fibre network The learner can: 1 explain the quality standards that apply for all installation and maintenance work on the
optical fibre network 2 explain what technical documentation needs to be completed before and after
undertaking work on the fibre network Outcome 4 Prepare and install optical fibre components in exchanges and
customer premises The learner can: 1 prepare optical fibre components for use 2 provide fibres from a customer premises point of entry to the equipment fibre pigtails for
both two-fibre and single-fibre working 3 test components before commissioning the components Outcome 5 Build an external fibre network The learner can: 1 prepare cables for splicing 2 manage cables on single circuit trays 3 splice fibres cables on single circuit trays Outcome 6 How to construct and re-enter a fibre closure The learner can: 1 explain where various fibre options should be used. 2 construct a fibre closure 3 re-enter an existing closure
63 IPCD3 V3.1 08072015
Working with ICT hardware and equipment
64 IPCD3 V3.1 08072015
WIHE2
Working with ICT hardware and equipment
65 IPCD3 V3.1 08072015
WIHE2 Working with ICT hardware and equipment Level: 2 Credit value: 9 Unit aim The aim of this unit is to provide the learner with an understanding of how to work effectively with ICT hardware and equipment. The learner will also understand which tools might be required, how to plan work and the expectations of customers. The learner will be able to identify any regulatory requirements that may affect work activities. The unit will also provide the learner with the opportunity to work with ICT hardware and equipment and implement some of the techniques they have learnt, whilst all the time communicating progress and avoiding any disruptions to service. Learning outcomes There are three outcomes to this unit. The learner will: 1. Know how to plan and carry out a range of ICT hardware and equipment work
activities under direction 2. Plan and carry out a range of ICT hardware and equipment work activities under
direction 3. Minimise risks related to ICT hardware and equipment work activities Guided learning hours It is recommended that 80 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 5.1 - Systems development of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
66 IPCD3 V3.1 08072015
WIHE2 Working with ICT hardware and equipment Learning outcomes and assessment criteria Outcome 1 Know how to plan and carry out a range of ICT hardware and equipment
work activities under direction The learner can: 1 describe the working process such as:
• tools and techniques to be used • procedures to be followed • procedures for information recording • customer requirements • product specifications • planning own work
2 explain how regulatory requirements affect work activities Outcome 2 Plan and carry out a range of ICT hardware and equipment work
activities under direction The learner can: 1 use appropriate tools and techniques safely 2 follow relevant working procedures such as:
• Health & Safety; • quality • use of tools • configuration • testing; logistics • waste disposal • problem escalation • information recording • obtaining work permissions • security and confidentiality • customer acceptance • commissioning • product registration
3 obtain specified resources 4 record relevant information 5 communicate the progress and outcome of work to the appropriate people Outcome 3 Minimise risks related to ICT hardware and equipment work activities The learner can: 1 assess and minimise risks related to work activities such as:
• loss or corruption of data • loss of service • damage to equipment
67 IPCD3 V3.1 08072015
Investigating and defining customer requirements for ICT systems
68 IPCD3 V3.1 08072015
IDR3
Investigating and defining customer requirements for ICT systems
69 IPCD3 V3.1 08072015
IDR3 Investigating and defining customer requirements for ICT systems Level: 3 Credit value: 12 Unit aim The aim of this unit is to provide the learner with an understanding how to investigate and identify the requirements of their customers when looking at ICT systems. In order to do this the learner will know how to use different methods of investigating the requirements of their customers, they will also be able to record their findings and present them to colleagues. The learners will also be able to analyse information and identify the needs and constraints in meeting the requirements of their customers. Learning outcomes There are two outcomes to this unit. The learner will: 1. Investigate existing systems and processes 2. Analyse information to identify needs and constraints Guided learning hours It is recommended that 75 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 5.1 - Systems development of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
70 IPCD3 V3.1 08072015
IDR3 Investigating and defining customer requirements for ICT systems Learning outcomes and assessment criteria Outcome 1 Investigate existing systems and processes The learner can: 1 use three of the following investigative methods:
• observations • examination of existing documents, records or software • questionnaires • site surveys
2 record the results of investigations using standard documentation 3 explain the importance of preserving the confidentiality of customer information
Outcome 2 Analyse information to identify needs and constraints The learner can: 1 describe the type of defect, including inaccuracy, duplication and omission, which can
arise in information 2 describe the types of customer needs and constraints which can affect the design of an
ICT system 3 analyse information to identify customer needs for:
• data to be stored and processed • functionality in terms of inputs, processes and outputs • capacity including numbers of users, throughput, and data storage
4 analyse information to identify customer constraints 5 record the results of analyses using standard documentation
71 IPCD3 V3.1 08072015
IDR4
Investigating and defining customer requirements for ICT systems
72 IPCD3 V3.1 08072015
IDR4 Investigating and defining customer requirements for ICT systems Level: 4 Credit value: 15 Unit aim The aim of this unit is to provide the learner with an understanding how to investigate and define the requirements of their customers when looking at ICT systems. In order to do this the learner will know how to use different methods of investigating the requirements of their customers, they will also be able to record their findings and present them to colleagues. The learners will also be able to analyse information and identify the needs and constraints in meeting the requirements of their customers. Learning outcomes There are two outcomes to this unit. The learner will: 3. Control the investigation of existing and proposed systems and processes 4. Analyse information to identify needs and constraints Guided learning hours It is recommended that 90 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 5.1 - Systems development of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
73 IPCD3 V3.1 08072015
IDR4 Investigating and defining customer requirements for ICT systems Learning outcomes and assessment criteria Outcome 1 Control the investigation of existing and proposed systems and
processes The learner can: 1 select and use the investigative methods which will elicit relevant information about
existing and proposed systems and processes 2 create the documentation required to record the results of investigations 3 ensure that investigative methods are applied correctly and all relevant information is
recorded using standard documentation 4 ensure that the confidentiality of customer information is preserved 5 provide advice and guidance to colleagues on investigation and analysis of information Outcome 2 Analyse information to identify needs and constraints The learner can: 1 explain the types of defect, and their causes which can arise in information 2 describe methods of minimising defects in information. 3 explain how customer needs and constraints can affect the design of an ICT system 4 analyse information to identify customer needs and priorities for:
• data to be stored and processed • functionality in terms of inputs, processes and outputs • capacity including numbers of users, throughput, and data storage
5 analyse information to identify customer constraints 6 verify that identified needs, priorities and constraints meet customer requirements
74 IPCD3 V3.1 08072015
Remote support for products and services
75 IPCD3 V3.1 08072015
RS3
Remote support for products and services
76 IPCD3 V3.1 08072015
RS3 Remote support for products and services Level: 3 Credit value: 12 Unit aim The aim of this unit is to enable the learner to understand some of the concepts of supporting IT systems remotely. Learners will know which products can be supported and how they can be supported, as well as understanding about any organisational requirements that govern this topic. Learners will also understand the customer care aspects of remote support, such as customer service procedures. The learner will also know how to follow any relevant legislation when carry out these activities. Learning outcomes There are two outcomes to this unit. The learner will: 1. Understand the organisational requirements for customer care and the supported
products and services 2. Support products or services Guided learning hours It is recommended that 100 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Disciplines 7.1 - IT/Technology service operations and event management and 7.5 - IT/Technology management and support of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
77 IPCD3 V3.1 08072015
RS3 Remote support for products and services Learning outcomes and assessment criteria Outcome 1 Understand the organisational requirements for customer care and the
supported products and services The learner can: 1 describe the products and services to be supported including:
• benefits of the products and services; • frequently used product or service options; • advanced features, benefits and options of products and services; • how to identify alternative products or services to meet customers needs; • how the products or services interact with others commonly available; • where to obtain information on infrequently used product or service features
or options; • the impact of introducing new products and services.
2 describe the organisational requirements for customer care including:
• customer service procedures (e.g. how to log customer information, how to initiate service calls, how to complete a sale);
• authorisation procedures (e.g. how to confirm caller identity, how to validate requests);
• escalation, resolution and complaint handling; • quality assurance procedures; • compliance with relevant legislation and regulations (e.g. data protection,
financial services); • maintenance and communication of organisational brand or image; • organisational aims and objectives
Outcome 2 Support products or services The learner can: 1 comply with organisational requirements. 2 confirm customer identity, validate requests and inform customers when authorisation
criteria are not met. 3 communicate information on specified products or services;
• identifying customer needs; • accurately collecting and logging relevant information from the customer; • providing product and service features to customers; • ensuring customer understanding of the information provided; • categorising requests and directing customers appropriately; • managing customer expectations (e.g. by confirming outcomes, timescales or
costs); • discussing advantages and disadvantages of complex products and services; • discussing how the service product best fits the customer needs; • keeping customer informed on progress; • asking effective and appropriate probing questions
4 make recommendations based on customer needs 5 resolve and escalate requests and handle basic complaints
• using probing questions • displaying patience and understanding with demanding or emotional
customers • diffusing volatile situations using appropriate communication techniques
78 IPCD3 V3.1 08072015
• delivering difficult messages to customers and explaining the reasons behind the decision
• assessing priority of complaints • resolving routine complaints
79 IPCD3 V3.1 08072015
Systems architecture
80 IPCD3 V3.1 08072015
SA4
Systems architecture
81 IPCD3 V3.1 08072015
SA4 Systems architecture Level: 4 Credit value: 10 Unit aim This unit will introduce some of the principles required to understand systems architecture, and also allow the learners to explore systems architecture through practical activities. Learning outcomes There are four outcomes to this unit. The learner will: 1. Understand the representation of information within a computer and the way it is
processed 2. Use and develop the operating environment of current computer systems 3. Understand the communication process in distributed operating systems and computer
networks 4. Understand distributed applications and transaction processing in mainframe systems Guided learning hours It is recommended that 80 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 4.1 Systems architecture of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
82 IPCD3 V3.1 08072015
SA4 Systems architecture Learning outcomes and assessment criteria Outcome 1 Understand the representation of information within a computer and the
way it is processed The learner can: 1 explain how number systems and data representation are used to store information in a
computer 2 explain the role of input, output and storage devices 3 describe the characteristics of C.P.U. components and the operation of the Fetch
Execute Cycle 4 describe the operation of a peripheral device, controller hardware and physical
connection using correct technical terminology and reference to relevant standards Outcome 2 Use and develop the operating environment of current computer
systems The learner can: 1 use and configure operating system interfaces and functions 2 explain the role of process management and concurrent processes in computer
operating systems 3 describe how operating system features can contribute to data and system security Outcome 3 Understand the communication process in distributed operating
systems and computer networks The learner can: 1 describe the function and operation of distributed operating systems 2 describe the functions of data communications systems in enabling network and
distributed systems Outcome 4 Understand distributed applications and transaction processing in
mainframe systems The learner can: 1 describe the operation and functions of mainframe systems 2 describe the evolution of and characteristics of distributed applications 3 describe data and process distribution 4 explain distribution and transaction transparency
83 IPCD3 V3.1 08072015
Security of ICT Systems
84 IPCD3 V3.1 08072015
SEC3
Security of ICT Systems
85 IPCD3 V3.1 08072015
SEC3 Security of ICT Systems Level: 3 Credit value: 12 Unit aim To develop knowledge, understanding and skills to ensure the security of an IT system and its data using security tools and assisting in the security auditing process. Learning outcomes There are three outcomes to this unit. The learner will: 1. Know the common types of security threat to an organisation, its IT system and its
data, with relevant methods and procedures for protecting it. 2. Apply security measures 3. Monitor security procedures Guided learning hours It is recommended that 100 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 6.2 - IT/Technology security management of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
86 IPCD3 V3.1 08072015
SEC3 Security of ICT Systems Learning outcomes and assessment criteria Outcome 1 Know the common types of security threat to an organisation, its IT
system and its data, with relevant methods and procedures for protecting it.
The learner can: 1 describe the common types of security breach that can affect the organisation, such as:
• unauthorised use of a system without damage to data; • unauthorised removal or copying of data or code from a system; • damage to or destruction of physical system assets and environment • damage to or destruction of data or code inside or outside the system • preventing normal use of a system (eg denial of service attack)
2 describe specified data protection methods:
• system data security facilities; • surveillance and monitoring methods; • effects of system configuration on data protection
3 describe specified methods of providing physical security for ICT systems
• access control devices (e.g. locks, biometric controls, CCTV) and their configuration
• limiting visibility of data (e.g. by positioning of monitors, using encryption) • shielding (e.g. cable screening, Faraday cages) • types and appropriate uses of access records and authorisations • how to allocate access authority
4 describe relevant organisational security procedures Outcome 2 Apply security measures The learner can: 1 configure and apply specified security tools to identify and prevent breaches of security,
such as: • internal system tools (e.g. passwords and permissions, malware scanning,
firewall, VPN, authentication and encryption facilities) • external tools (e.g. access control devices)
Outcome 3 Monitor security procedures The learner can: 1 assist in ensuring compliance with organisational security procedures, including:
• participating in security audits • gathering and recording information on security • initiating suitable actions to deal with identified breaches of security
87 IPCD3 V3.1 08072015
SEC4
Security of ICT Systems
88 IPCD3 V3.1 08072015
SEC4 Security of ICT Systems Level: 4 Credit value: 15 Unit aim To develop knowledge, understanding and skills to ensure the security of an IT system and its data using security tools and assisting in the security auditing process. Learning outcomes There are three outcomes to this unit. The learner will: 1. Understand the security threats to an IT system, their operational impact and the
methods available to combat them 2. Maintain and improve ICT security procedures 3. Implement security procedures Guided learning hours It is recommended that 90 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 6.2 - IT/Technology security management of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
89 IPCD3 V3.1 08072015
SEC4 Security of ICT Systems Learning outcomes and assessment criteria Outcome 1 Understand the security threats to an IT system, their operational
impact and the methods available to combat them The learner can: 1 describe the data protection methods that are relevant to the organisation 2 describe physical security methods in use 3 describe organisational security procedures 4 describe types of possible security breaches and their operational impacts Outcome 2 Maintain and improve ICT security procedures The learner can: 1 review and update security procedures 2 ensure compliance with security procedures by scheduling security audits 3 initiate suitable actions to deal with identified breaches of security 4 inform colleagues of their security responsibilities and confirm their understanding at
suitable intervals Outcome 3 Implement security procedures The learner can: 1 schedule and carry out security risk assessments 2 select appropriate security tools for the organisation or department to use
90 IPCD3 V3.1 08072015
SEC1
Security of ICT Systems
91 IPCD3 V3.1 08072015
SEC1 Security of ICT Systems Level: 1 Credit value: 3 Unit aim This unit introduces the learner to the threats to IT systems from outside forces, and also introduces the learner to the need to protect their IT systems. The learner will also explore technologies that can be used to secure systems. The learner will also use some of the tools to demonstrate how they can prevent access to IT systems, whilst complying with organisational security policies. Learning outcomes There are two outcomes to this unit. The learner will: 1. Know the particular threats to an IT system and its data with specified methods and
procedures for protecting it. 2. Comply with relevant security requirements to protect an IT system and its data Guided learning hours It is recommended that 20 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 6.2 - IT/Technology security management of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
92 IPCD3 V3.1 08072015
SEC1 Security of ICT Systems Learning outcomes and assessment criteria Outcome 1 Know the particular threats to an IT system and its data with specified
methods and procedures for protecting it. The learner can: 1 describe specified data protection methods, such as
• malware detection software (anti-virus, anti-spyware etc) • Internet security suites (firewall, malware detection, anti-phishing and spam
filters) • use and protection of passwords or access codes • backup and storage
2 describe specified methods of providing physical security for ICT systems:
• access control devices (e.g locks, biometric controls, CCTV) • limiting visibility of data (e.g. by positioning of monitors, using encryption) • shielding (e.g. cable screening, Faraday cages)
3 describe relevant organisational security procedures 4 describe the type of security breaches that can occur in IT systems, such as
• unauthorised use of a system without damage to data • unauthorised removal or copying of data or code from a system • damage to or destruction of physical system assets and environment • damage to or destruction of data or code inside or outside the system • preventing normal use of a system (eg denial of service attack)
Outcome 2 Comply with relevant security requirements to protect an IT system and
its data The learner can: 1 use specified security tools to identify and prevent breaches of security:
• internal system tools (e.g. passwords, anti-virus software, firewalls and encryption facilities)
• external tools (e.g. access control devices) 2 comply with organisational security procedures
93 IPCD3 V3.1 08072015
Software installation and upgrade
94 IPCD3 V3.1 08072015
SIU2
Software installation and upgrade
95 IPCD3 V3.1 08072015
SIU2 Software installation and upgrade Level: 2 Credit value: 9 Unit aim This is the ability to install or upgrade software on any ICT system following agreed processes. It includes:
Preparation and planning
Installation or upgrade
Configuration and handover to the customer The software installation/upgrade target can be any system capable of running software which can be interactively installed or upgraded. Examples include base stations, switches and hubs, control systems and mobile, desktop and server computers. A competent person at level 2 can carry out a range of installations or upgrades under instruction. Learning outcomes There are two outcomes to this unit. The learner will: 1. Understand relevant parts of the installation/upgrade process 2. Install/upgrade software Guided learning hours It is recommended that 80 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 7.4 - IT Application management/support of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit. Evidence can reflect how the candidate carried out the process or it can be the product of a candidate’s work or a product relating to the candidate’s competence.
96 IPCD3 V3.1 08072015
SIU2 Software installation and upgrade Learning outcomes and assessment criteria Outcome 1 Understand relevant parts of the installation/upgrade process The learner can: 1 describe the relevant parts of the software installation and upgrade process including:
• procedures to be followed • procedures for information recording • software storage locations to be used • specifications of the software
2 describe relevant software loading facilities Outcome 2 Install/upgrade software The learner can: 1 follow relevant installation/upgrade procedures 2 use appropriate software loading facilities 3 record relevant information 4 communicate the progress and outcome of the installation/upgrade to the appropriate
people
97 IPCD3 V3.1 08072015
SIU3
Software installation and upgrade
98 IPCD3 V3.1 08072015
SIU3 Software installation and upgrade Level: 3 Credit value: 12 Unit aim This is the ability to install or upgrade software on any ICT system following agreed processes. It includes:
preparation and planning
installation or upgrade
configuration and handover to the customer The software installation/upgrade target can be any system capable of running software which can be interactively installed or upgraded. Examples include base stations, switches and hubs, control systems and mobile, desktop and server computers A competent person at level 3 can plan and carry out or control a wide range of installations or upgrades. Learning outcomes There are two outcomes to this unit. The learner will: 1. Understand the installation/upgrade process 2. Carry out or control a wide range of installations or upgrades Guided learning hours It is recommended that 100 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 7.4 - IT Application management/support of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit. Evidence can reflect how the candidate carried out the process or it can be the product of a candidate’s work or a product relating to the candidate’s competence.
99 IPCD3 V3.1 08072015
SIU3 Software installation and upgrade Learning outcomes and assessment criteria Outcome 1 Understand the installation/upgrade process The learner can: 1 describe the software installation and upgrade process including:
• procedures to be followed • procedures for information recording • software storage locations to be used • specifications of the software
2 describe the capabilities of software loading facilities Outcome 2 Carry out or control a wide range of installations or upgrades The learner can: 1 provide guidance on installation/upgrade procedures to immediate colleagues 2 obtain and allocate required materials 3 select the installation/upgrade procedures to be followed 4 select software loading facilities to be used
100 IPCD3 V3.1 08072015
System operation
101 IPCD3 V3.1 08072015
SO3
System operation
102 IPCD3 V3.1 08072015
SO3 System operation Level: 3 Credit value: 12 Unit aim This is the ability to operate and monitor a system which can be any combination of equipment, hardware and software. This may include:
using data backup and restore routines
handling of incidents
controlling and monitoring availability and performance of system components
start-up/close-down routines
scheduling routine or preventative maintenance
maintenance of operating plans and schedules Examples of 'operational activities' are:
replenishment of consumables
routine or preventative maintenance
data backups A competent person at level 3 can maintain and implement system operating procedures. Learning outcomes There are three outcomes to this unit. The learner will: 1. Know how to operate the system 2. Operate systems 3. Maintain and implement system operating procedures Guided learning hours It is recommended that 100 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Disciplines 7.4 - IT Application management/support and 7.5 - IT/Technology management and support of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit. Evidence can reflect how the candidate carried out the process or it can be the product of a candidate’s work or a product relating to the candidate’s competence.
103 IPCD3 V3.1 08072015
SO3 System operation Learning outcomes and assessment criteria Outcome 1 Know how to operate the system The learner can: 1 explain the operating procedures that are applicable to the system, such as:
• required service levels (e.g. availability, quality) • routine maintenance • monitoring • data integrity (e.g. backups, anti-virus) • consumables use, storage & disposal • Health & Safety • escalation • information recording and reporting • obtaining work permissions • security & confidentiality
2 describe system functionality during normal operation 3 describe the effects of operational activities on system functionality Outcome 2 Operate systems The learner can: 1 use and operate the system following appropriate procedures 2 identify system faults and resolve or escalate system faults as appropriate 3 gather and record specified operational information 4 assess and minimise risks such as:
• loss or corruption of data • loss of service • damage to equipment • effects on customer operations
Outcome 3 Maintain and implement system operating procedures The learner can: 1 provide advice and guidance on system operation to immediate colleagues 2 select the procedures to be followed 3 schedule operational activities to minimise disruption to system functionality 4 collate operational information
104 IPCD3 V3.1 08072015
SO2
ICT system operation
105 IPCD3 V3.1 08072015
SO2 ICT system operation Level: 2 Credit value: 9 Unit aim This is the ability to operate and monitor a system which can be any combination of equipment, hardware and software. This may include:
using data backup and restore routines
handling of incidents
controlling and monitoring availability and performance of system components
start-up/close-down routines
scheduling routine or preventative maintenance
maintenance of operating plans and schedules
Examples of 'operational activities' are:
replenishment of consumables
routine or preventative maintenance
data backups A competent person at level 2 can operate a system under instruction. Learning outcomes There are two outcomes to this unit. The learner will: 1. Know the relevant parts of the operating system 2. Operate specified parts of the system Guided learning hours It is recommended that 45 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Disciplines 7.4 - IT Application management/support and 7.5 - IT/Technology management and support of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit. Evidence can reflect how the candidate carried out the process or it can be the product of a candidate’s work or a product relating to the candidate’s competence.
106 IPCD3 V3.1 08072015
SO2 ICT system operation Learning outcomes and assessment criteria Outcome 1 Know the relevant parts of the operating system The learner can: 1 describe the relevant parts of operating procedures;
• required service levels (e.g. availability, quality) • routine maintenance • monitoring • data integrity (e.g. backups, anti-virus) • consumables use, storage & disposal • Health & Safety • escalation • information recording and reporting • obtaining work permissions • security & confidentiality
2 describe the functionality of relevant parts of the system Outcome 2 Operate specified parts of the system The learner can: 1 operate specified parts of the system
• operating specified system parts following procedures • recognising, resolving or escalating system faults • gathering and recording specified operational information
2 assess and minimize risks related to your own actions such as
• loss or corruption of data • loss of service • damage to equipment
107 IPCD3 V3.1 08072015
Technical advice and guidance
108 IPCD3 V3.1 08072015
TAG2
Technical advice and guidance
109 IPCD3 V3.1 08072015
TAG2 Technical advice and guidance Level: 2 Credit value: 9 Unit aim The aim of this unit is for the learner to provide technical support. In order to do this the learner will know how technical advice and guidance can be used and they are able to identify the types of information that can aid the user who is being supported. As part of this unit the learner will identify the purposes of IT technical support through providing support to different user types. All of this will be done whilst following organisational guidelines. Learning outcomes There are two outcomes to this unit. The learner will: 1. Know how to provide technical advice and guidance 2. Provide reactive technical advice and guidance to customers on a range of topics Guided learning hours It is recommended that 50 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Disciplines 7.1 IT/Technology service operations and event management and 7.2 IT/Technology service help desk and incident management of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit. Evidence can reflect how the candidate carried out the process or it can be the product of a candidate’s work or a product relating to the candidate’s competence. Simulation is not allowed for this unit.
110 IPCD3 V3.1 08072015
TAG2 Technical advice and guidance Learning outcomes and assessment criteria Outcome 1 Know how to provide technical advice and guidance The learner can: 1 identify how technical advice and guidance can be used 2 list the types of information which can form the basis of technical advice and guidance 3 identify organisational procedures which can apply to the provision of technical advice
and guidance 4 identify circumstances where technical advice and guidance should be provided
proactively rather than reactively in response to customer requests (e.g. to rectify known faults, to provide new functionality)
Outcome 2 Provide reactive technical advice and guidance to customers on a range
of topics The learner can: 1 identify the purposes for which technical advice and guidance is required 2 check that customers are entitled to receive the requested technical advice and
guidance 3 communicate effectively with customers to obtain specified information to enable correct
technical advice and guidance to be provided 4 interpret given technical information to produce advice and guidance in response to
customer requests 5 communicate technical advice and guidance to customers in a given format and style,
confirming customer understanding of the information provided 6 follow organisational procedures for responding to customer requests including the
timely escalation of those for which technical advice and guidance cannot be provided or does not resolve the request
111 IPCD3 V3.1 08072015
TAG3
Technical advice and guidance
112 IPCD3 V3.1 08072015
TAG3 Technical advice and guidance Level: 3 Credit value: 12 Unit aim The aim of this unit is for the learner to provide technical support and to identify the purpose of giving such support and guidance. In order to this the learner will know how technical advice and guidance can be used and they can identify the types of information that can aid the user being supported. Learning outcomes There are three outcomes to this unit. The learner will: 1. Understand the context for providing technical advice and guidance 2. Provide reactive technical advice and guidance to customers on a range of topics 3. Provide proactive technical advice and guidance to customers Guided learning hours It is recommended that 75 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Disciplines 7.1 IT/Technology service operations and event management and 7.2 IT/Technology service help desk and incident management of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit. Evidence can reflect how the candidate carried out the process or it can be the product of a candidate’s work or a product relating to the candidate’s competence.
113 IPCD3 V3.1 08072015
TAG3 Technical advice and guidance Learning outcomes and assessment criteria Outcome 1 Understand the context for providing technical advice and guidance The learner can: 1 describe how technical advice and guidance can be used to:
• resolve problems • improve performance
2 describe the types, sources and applicability of information which can form the basis of
technical advice and guidance: • information from reference sources (e.g. manuals, handbooks, manufacturer’s
specifications) • information derived from the analysis of data (e.g. trend analysis, fault logs) • online information (e.g. manufacturer’s websites, technical fora, discussion
groups) 3 describe the procedures and constraints which can apply to the provision of technical
advice and guidance (e.g. escalation, commercial/contractual, legal/regulatory, information security)
4 identify circumstances where technical advice and guidance should be provided proactively rather than reactively in response to customer requests (e.g. to rectify known faults, to provide new functionality)
Outcome 2 Provide reactive technical advice and guidance to customers on a range
of topics The learner can: 1 determine the purposes for which technical advice and guidance is required 2 verify that customers are entitled to receive the requested technical advice and
guidance 3 communicate effectively with customers to elicit sufficient information to enable correct
technical advice and guidance to be provided 4 source and interpret relevant technical information to produce advice and guidance in
response to customer requests 5 communicate technical advice and guidance to customers in a format and style which
meets their needs, confirming customer understanding of the information provided 6 follow organisational procedures for responding to customer requests including the
timely escalation of those for which technical advice and guidance can not be provided or does not resolve the request
Outcome 3 Provide proactive technical advice and guidance to customers The learner can: 1 identify the purposes for which the technical advice and guidance is required 2 identify the customers, and their level of technical knowledge, to whom the technical
advice and guidance should be provided 3 develop technical advice and guidance in a format and style which takes into account
the customers’ level of technical knowledge. 4 follow organisational procedures for providing proactive technical advice and guidance
114 IPCD3 V3.1 08072015
TAG4
Technical advice and guidance
115 IPCD3 V3.1 08072015
TAG4 Technical advice and guidance Level: 4 Credit value: 15 Unit aim The aim of this unit is for the learner to provide and manage technical advice and guidance. In order to this the learner will know how to control the provision of technical support and guidance, by ensuring that policies and procedures are in place and being followed. The learner will also understand the importance of providing proactive and reactive support to users. Learning outcomes There are three outcomes to this unit. The learner will: 1. Control the provision of technical advice and guidance 2. Provide reactive technical advice and guidance to customers on a range of topics 3. Provide proactive technical advice and guidance to customers Guided learning hours It is recommended that 90 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Disciplines 7.1 IT/Technology service operations and event management and 7.2 IT/Technology service help desk and incident management of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit. Evidence can reflect how the candidate carried out the process or it can be the product of a candidate’s work or a product relating to the candidate’s competence.
116 IPCD3 V3.1 08072015
TAG4 Technical advice and guidance Learning outcomes and assessment criteria Outcome 1 Control the provision of technical advice and guidance The learner can: 1 ensure that organisational procedures for providing technical advice and guidance are
followed • resolve problems • improve performance
2 describe the types, sources and applicability of information which can form the basis of
technical advice and guidance: • information from reference sources (e.g. manuals, handbooks, manufacturer’s
specifications) • information derived from the analysis of data (e.g. trend analysis, fault logs) • online information (e.g. manufacturer’s websites, technical forums, discussion
groups) 3 describe the procedures and constraints which can apply to the provision of technical
advice and guidance (e.g. escalation, commercial/contractual, legal/regulatory, information security)
4 identify circumstances where technical advice and guidance should be provided proactively rather than reactively in response to customer requests (e.g. to rectify known faults, to provide new functionality)
Outcome 2 Provide reactive technical advice and guidance to customers on a range
of topics The learner can: 1 determine the purposes for which technical advice and guidance is required 2 verify that customers are entitled to receive the requested technical advice and
guidance 3 communicate effectively with customers to elicit sufficient information to enable correct
technical advice and guidance to be provided 4 source and interpret relevant technical information to produce advice and guidance in
response to customer requests 5 communicate technical advice and guidance to customers in a format and style which
meets their needs, confirming customer understanding of the information provided 6 follow organisational procedures for responding to customer requests including the
timely escalation of those for which technical advice and guidance cannot be provided or does not resolve the request
Outcome 3 Provide proactive technical advice and guidance to customers The learner can: 1 identify the purposes for which the technical advice and guidance is required 2 identify the customers, and their level of technical knowledge, to whom the technical
advice and guidance should be provided 3 develop technical advice and guidance in a format and style which takes into account
the customers’ level of technical knowledge 4 follow organisational procedures for providing proactive technical advice and guidance
117 IPCD3 V3.1 08072015
Testing ICT systems
118 IPCD3 V3.1 08072015
TIS2
Testing ICT systems
119 IPCD3 V3.1 08072015
TIS2 Testing ICT systems Level: 2 Credit value: 9 Unit aim The aim of this unit is to provide the learner with the opportunity to test ICT systems whether they be software or hardware systems. In order to do this the learner will need to understand some basic system information, as well as understanding the tests themselves. The learner will understand any health and safety considerations that need to be factored in before and during testing. The learner will also need to know and consider any security implications associated with the systems they are testing. Learning outcomes There are two outcomes to this unit. The learner will: 1. Know technical information about a range of products, testing procedures and
associated activities, equipment to be used and the reasons for the test 2. Carry out routine testing and assist in other testing Guided learning hours It is recommended that 80 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 5.3 - IT/Technology solution testing of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
120 IPCD3 V3.1 08072015
TIS2 Testing ICT systems Learning outcomes and assessment criteria Outcome 1 Know technical information about a range of products, testing
procedures and associated activities, equipment to be used and the reasons for the test
The learner can: 1 describe the testing process to be followed:
how to select tests and collect relevant and sufficient information for the test to be successful
how to minimise service disruption during testing and avoid detrimental effects or changes to performance
ways to configure tests how to record, maintain or restore configurations, data and functionality types of service level agreements individual responsibility and authority escalation procedures and risks associated with using a testing process
2 describe the purposes of testing eg:
aiding the diagnostic process comparing actual and expected performance
3 describe relevant test preparation and conclusion activities, such as:
health & safety legislation and regulations need to obtain work permissions site access and security system or equipment integrity (e.g. ensuring network service continuity) data integrity (e.g. taking data backups before commencing work) resource availability level of service allowed by the SLA environmental legislation and regulations (e.g. disposal of materials) work sign-off and reporting site restoration .system and equipment integrity (e.g. restoring service) data integrity (e.g. restoring data backups as necessary)
4 interpret technical information on a specified range of products Outcome 2 Carry out routine testing and assist in other testing The learner can: 1 ensure relevant preparation and conclusion activities have been carried out (see list
above) 2 use appropriate testing tools, such as:
electrical/electronic test instruments on-board self-test programs loopback devices on-line/remote monitoring software software debuggers runtime analysers diagnostic software
121 IPCD3 V3.1 08072015
3 gather and record relevant test information and test results, including:
identifying the relevant information using approved sources of information validating information
4 respond to test information and results:
interpreting error codes/messages comparing with specifications identifying inconsistent data
122 IPCD3 V3.1 08072015
TIS3
Testing ICT systems
123 IPCD3 V3.1 08072015
TIS3 Testing ICT systems Level: 3 Credit value: 12 Unit aim The aim of this unit is to introduce the principles of testing ICT systems. In order to do this the learner will know how to select relevant tests. Whilst performing these tests, the learner will be able to record the outcomes and prepare their test environment correctly and safely. The learner will also understand how to follow service level agreements and how to use different types of testing tools depending of the situation. The learner will also be able to present and record their findings and know the importance of doing so. Learning outcomes There are two outcomes to this unit. The learner will: 1. Know technical information about a wide range of products, testing procedures and
associated activities, equipment to be used and the reasons for the test 2. Carry out testing and support others in the testing process Guided learning hours It is recommended that 100 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 5.3 - IT/Technology solution testing of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
124 IPCD3 V3.1 08072015
TIS3 Testing ICT systems Learning outcomes and assessment criteria Outcome 1 Know technical information about a range of products, testing
procedures and associated activities, equipment to be used and the reasons for the test
The learner can: 1 describe the testing process to be followed
how to select tests and collect relevant and sufficient information for the test to be successful
how to minimise service disruption during testing and avoid detrimental effects or changes to performance
ways to configure tests how to record, maintain or restore configurations, data and functionality types of service level agreements individual responsibility and authority escalation procedures and risks associated with using a testing process information analysis (level 3)
2 describe the purposes of testing
aiding the diagnostic process comparing actual and expected performance testing performance
3 describe what test preparation and conclusion activities are necessary for specific tests,
such as:
health & safety legislation and regulations need to obtain work permissions site access and security system or equipment integrity (e.g. ensuring network service continuity) data integrity (e.g. taking data backups before commencing work) resource availability level of service allowed by the SLA environmental legislation and regulations (e.g. disposal of materials) work sign-off and reporting site restoration .system and equipment integrity (e.g. restoring service) data integrity (e.g. restoring data backups as necessary)
4 interpret detailed technical information on a specified range of products Outcome 2 Carry out testing and support others in the testing process The learner can: 1 provide technical advice to support testing 2 select any necessary preparation and conclusion activities and ensure that they have
been completed 3 select, adapt and use appropriate testing tools:
electrical/electronic test instruments on-board self-test programs
125 IPCD3 V3.1 08072015
loopback devices on-line/remote monitoring software software debuggers runtime analysers diagnostic software
4 gather, record and respond to test information and results by:
interpreting error codes/messages comparing with specifications identifying inconsistent data examining results from multiple tests or trend analysis using analytical tools to extract information from test data
126 IPCD3 V3.1 08072015
Vendor units
127 IPCD3 V3.1 08072015
MSC1
Configuring Windows Server 2008 Active Directory
128 IPCD3 V3.1 08072015
MSC1 Configuring Windows Server 2008 Active Directory Level: 3 Credit value: 13 Unit aim The aim of this unit is to provide the underpinning knowledge required for a learner to meet the requirements of the Microsoft Configuring Windows Server 2008 Active Directory exam. The aim of this unit is for the learner to know how to configure domain name services. The learner will also be able to configure the active directory structure as well as configuring additional roles. They will also be able to create and manage active directory objects and configure certificate services. Learning outcomes There are six outcomes to this unit. The learner will: 1. Configure Domain Name System (DNS) for Active Directory 2. Configure the Active Directory infrastructure 3. Configure additional Active Directory server roles 4. Create and maintain Active Directory objects 5. Maintain the Active Directory environment 6. Configure Active Directory Certificate Services Guided learning hours It is recommended that 90 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 7.1 - IT/Technology service operations and event management of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
129 IPCD3 V3.1 08072015
MSC1 Configuring Windows Server 2008 Active Directory Learning outcomes and assessment criteria Outcome 1 Configure Domain Name System (DNS) for Active Directory The learner can: 1 configure zones 2 configure DNS server settings 3 configure zone transfers and replication Outcome 2 Configure the Active Directory infrastructure The learner can: 1 configure a forest or a domain 2 configure trusts 3 configure Active Directory replication. 4 configure sites. 5 configure the global catalogue 6 configure operations masters Outcome 3 Configure additional Active Directory server roles The learner can: 1 configure Active Directory Lightweight Directory Service (AD LDS). 2 configure Active Directory Rights Management Service (AD RMS). 3 configure the read-only domain controller (RODC). 4 configure Active Directory Federation Services (AD FS). Outcome 4 Create and maintain Active Directory objects The learner can: 1 automate creation of Active Directory accounts 2 maintain Active Directory accounts 3 create and apply Group Policy objects (GPOs) 4 configure GPO templates 5 configure software deployment GPOs 6 configure audit policy by using GPOs 7 configure account policies Outcome 5 Maintain the Active Directory environment The learner can: 1 configure backup and recovery 2 perform offline maintenance 3 monitor Active Directory
130 IPCD3 V3.1 08072015
Outcome 6 Configure Active Directory certificate services The learner can: 1 install Active Directory Certificate Services 2 configure CA server settings 3 manage certificate templates 4 manage enrolments 5 manage certificate revocations
131 IPCD3 V3.1 08072015
MSC2
Configuring Windows Server 2008 network infrastructure
132 IPCD3 V3.1 08072015
MSC2 Configuring Windows Server 2008 network infrastructure Level: 3 Credit value: 11 Unit aim The aim of this unit is to provide the underpinning knowledge required for a learner to meet the requirements of the Microsoft Configuring Windows Server 2008 Network Infrastructure exam. In order to do this the learner will be able to configure IP addressing and other services built into the server. They will also be able to configure name resolution and network access and will know how to monitor and manage network infrastructure. Learning outcomes There are five outcomes to this unit. The learner will: 1. Configure IP addressing and services 2. Configure name resolution 3. Configure network access 4. Configuring file and print services 5. Monitor and manage a network infrastructure Guided learning hours It is recommended that 90 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Disciplines 4.7 – Systems design and 5.1 - Systems development of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
133 IPCD3 V3.1 08072015
MSC2 Configuring Windows Server 2008 network infrastructure Learning outcomes and assessment criteria Outcome 1 Configure IP addressing and services The learner can: 1 configure IPv4 and IPv6 addressing 2 configure Dynamic Host Configuration Protocol (DHCP) 3 configure routing 4 configure IPsec Outcome 2 Configure name resolution The learner can: 1 configure a Domain Name System (DNS) server 2 configure DNS zones 3 configure DNS records 4 configure DNS replication 5 configure name resolution for client computers Outcome 3 Configure network access The learner can: 1 configure remote access 2 configure Network Access Protection (NAP) 3 configure network authentication 4 configure wireless access 5 configure firewall settings Outcome 4 Configuring file and print services The learner can: 1 configure a file server 2 configure Distributed File System (DFS) 3 configure shadow copy services 4 configure backup and restore 5 manage disk quotas 6 configure and monitor print services Outcome 5 Monitor and manage a network infrastructure The learner can: 1 configure Windows Server Update Services (WSUS) server settings 2 capture performance data 3 monitor event logs 4 gather network data
134 IPCD3 V3.1 08072015
MSC3
Windows Server 2008 server administrator
135 IPCD3 V3.1 08072015
MSC3 Windows Server 2008, Server Administrator Level: 3 Credit value: 11 Unit aim The aim of this unit is to provide the learner with an understanding of how to administer a Microsoft Windows 2008 Server. In order to do this the learner will be able to plan for the deployment of a server environment. They will also be able to plan for server management and know how to monitor and maintain servers. The learner will also be able to plan for business continuity and high availability. Learning outcomes There are five outcomes to this unit. The learner will: 1. Plan for server deployment 2. Plan for server management 3. Monitor and maintain servers 4. Plan application and data provisioning 5. Plan for business continuity and high availability Guided learning hours It is recommended that 90 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 7.1 - IT/Technology service operations and event management of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence for this unit.
136 IPCD3 V3.1 08072015
MSC3 Windows Server 2008, Server Administrator Learning outcomes and assessment criteria Outcome 1 Plan for server deployment The learner can: 1 plan server installations and upgrades 2 plan for automated server deployment 3 plan infrastructure services server roles 4 plan application servers and services 5 plan file and print server roles Outcome 2 Plan for server management The learner can: 1 plan server management strategies 2 plan for delegated administration 3 plan and implement group policy strategy Outcome 3 Monitor and maintain servers The learner can: 1 implement patch management strategy 2 monitor servers for performance evaluation and optimization 3 monitor and maintain security and policies Outcome 4 Plan application and data provisioning The learner can: 1 provision applications 2 provision data Outcome 5 Plan for business continuity and high availability The learner can: 1 plan storage 2 plan high availability 3 plan for backup and recovery
137 IPCD3 V3.1 08072015
MSC4
MTA: security fundamentals
138 IPCD3 V3.1 08072015
MSC4 MTA: security fundamentals Level: 2 Credit value: 10 Unit aim The aim of this unit is to provide the underpinning knowledge required for the learner to meet the requirements of the relevant Microsoft exam associated with this unit. In order to do that the learner will understand the importance of security layers and they will be able to employ operating system security. The learner will also be able to understand network security and use security software. Learning outcomes There are four outcomes to this unit. The learner will: 1. Understanding security layers 2. Understanding operating system security 3. Understanding network security 4. Understanding security software Guided learning hours It is recommended that 80 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 6.2 - IT/Technology security management of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence to meet the relevant Microsoft test assessment.
139 IPCD3 V3.1 08072015
MSC4 MTA: security fundamentals Learning outcomes and assessment criteria Outcome 1 Understanding security layers The learner can: 1 understand core security principles 2 understand physical security 3 understand internet security 4 understand wireless security Outcome 2 Understanding operating system security The learner can: 1 understand user authentication 2 understand permissions 3 understand password policies 4 understand audit policies 5 understand encryption 6 understand malware Outcome 3 Understanding network security The learner can: 1 understand dedicated firewalls 2 understand Network Access Protection (NAP) 3 understand network isolation 4 understand protocol security Outcome 4 Understanding security software The learner can: 1 understand client protection 2 understand e-mail protection 3 understand server protection
140 IPCD3 V3.1 08072015
MSC5
MTA: Microsoft .NET Fundamentals
141 IPCD3 V3.1 08072015
MSC5 MTA: Microsoft .NET Fundamentals Level: 2 Credit value: 10 Unit aim The aim of this unit is to provide the underpinning knowledge required for the learner to meet the requirements of the relevant Microsoft exam associated with this unit. In order to do that the learner will understand the importance of .NET fundamentals. Learning outcomes There are six outcomes to this unit. The learner will: 1. Understanding .NET framework concepts 2. Understand namespaces and classes in the .NET framework 3. Understanding .NET code compilation 4. Understanding I/O classes in the .NET framework 5. Understanding security 6. Understand memory management Guided learning hours It is recommended that 80 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 6.2 - IT/Technology security management of the IT and Telecom Standards Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence to meet the relevant Microsoft test assessment.
142 IPCD3 V3.1 08072015
MSC5 MTA: Microsoft .NET Fundamentals Learning outcomes and assessment criteria Outcome 1 Understanding .NET framework concepts The learner can: 1 understanding basic application settings 2 understand events and event handling in the .NET framework 3 understand structured exception handling in the .NET framework Outcome 2 Understand namespaces and classes in the .NET framework The learner can: 1 understand .NET class hierarchies 2 understand object oriented concepts in the .NET framework 3 understand .NET namespaces 4 understand and create class libraries 5 understand and use different data types in the .NET framework 6 understand generics Outcome 3 Understanding .NET code compilation The learner can: 1 understand the fundamentals of Microsoft Intermediate Language (MSIL) and Common
Language Infrastructure (CLI) 2 understand the use of strong naming 3 understand version control 4 understand assemblies and metadata Outcome 4 Understanding I/O classes in the .NET framework The learner can: 1 understand .NET file classes 2 understand console I/O 3 understand XML classes in the .NET framework Outcome 5 Understanding security The learner can: 1 understand the system security namespace 2 understand authentication and authorisation 3 understand language interoperability 4 understand type safety Outcome 6 Understand memory management The learner can: 1 understand resource allocation 2 understand the difference between managed and unmanaged applications
143 IPCD3 V3.1 08072015
MSC6
MTA: Database Administration Fundamentals
144 IPCD3 V3.1 08072015
MSC6 MTA: Database Administration Fundamentals Level: 2 Credit value: 10 Unit aim The aim of this unit is to provide the underpinning knowledge required for the learner to meet the requirements of the relevant Microsoft exam associated with this unit. In order to do that the learner will understand the importance of Database Administration Fundamentals. Learning outcomes There are five outcomes to this unit. The learner will: 1. Understanding core database concepts 2. Creating database objects 3. Manipulating data 4. Understanding data storage 5. Administering a database Guided learning hours It is recommended that 80 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 4.5 - Data Design Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence to meet the relevant Microsoft test assessment.
145 IPCD3 V3.1 08072015
MSC6 MTA: Database Administration Fundamentals Learning outcomes and assessment criteria Outcome 1 Understanding Core Database Concepts The learner can: 1 understand how data is stored in tables 2 understand relational database concepts 3 understand data manipulation language (DML) 4 understand data definition language (DDL) Outcome 2 Creating Database Objects The learner can: 1 choose data types 2 understand tables and how to create them 3 create views 4 create stored procedures and functions
Outcome 3 Manipulating Data The learner can: 1 select data 2 insert data 3 update data 4 delete data Outcome 4 Understanding Data Storage The learner can: 1 understand normalization 2 understand primary, foreign, and composite keys 3 understand indexes Outcome 5 Administering a Database The learner can: 1 understand database security concepts 2 understand database backups and restore
146 IPCD3 V3.1 08072015
SMB7
MTA: Web Development Fundamentals
147 IPCD3 V3.1 08072015
SMB7 MTA: Web Development Fundamentals Level: 2 Credit value: 10 Unit aim The aim of this unit is to provide the underpinning knowledge required for the learner to meet the requirements of the relevant Microsoft exam associated with this unit. In order to do that the learner will understand the importance of Web Development Fundamentals. Learning outcomes There are five outcomes to this unit. The learner will: 1. Programming web applications 2. Working with data and services 3. Troubleshooting and debugging web applications 4. Working with client-side scripting 5. Configuring and deploying web applications Guided learning hours It is recommended that 80 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 4.8 IT/Technology infrastructure design and planning Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence to meet the relevant Microsoft test assessment.
148 IPCD3 V3.1 08072015
SMB7 MTA: Web Development Fundamentals Learning outcomes and assessment criteria Outcome 1 Programming Web Applications The learner can: 1 customize the layout and appearance of a Web page 2 understand ASP.NET intrinsic objects 3 understand state information in Web applications 4 understand events and control page flow 5 understand controls 6 understand configuration files Outcome 2 Working with Data and Services The learner can: 1 read and write XML data 2 distinguish between DataSet objects and DataReader objects 3 call a service from a Web page 4 understand DataSource controls 5 bind controls to data by using data-binding syntax 6 manage data connections and databases Outcome 3 Troubleshooting and Debugging Web Applications The learner can: 1 debug a Web application 2 handle Web application errors Outcome 4 Working with Client-Side Scripting The learner can: 1 understand client-side scripting 2 understand AJAX concepts Outcome 5 Configuring and Deploying Web Applications The learner can: 1 configure authentication and authorization 2 configure projects and solutions and reference assemblies 3 publish Web applications 4 understand application pools
149 IPCD3 V3.1 08072015
MSC8
MTA: Software Development Fundamentals
150 IPCD3 V3.1 08072015
MSC8 MTA: Software Development Fundamentals Level: 2 Credit value: 10 Unit aim The aim of this unit is to provide the underpinning knowledge required for the learner to meet the requirements of the relevant Microsoft exam associated with this unit. In order to do that the learner will understand the importance of Software Development Fundamentals. Learning outcomes There are six outcomes to this unit. The learner will: 1. Understanding core programming 2. Understanding object-oriented programming 3. Understanding general software development 4. Understanding web applications 5. Understanding desktop applications 6. Understanding databases Guided learning hours It is recommended that 80 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 5.2 Software development Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence to meet the relevant Microsoft test assessment.
151 IPCD3 V3.1 08072015
MSC8 MTA: Software Development Fundamentals Learning outcomes and assessment criteria Outcome 1 Understanding Core Programming The learner can: 1 understand computer storage and data types 2 understand computer decision structures 3 identify the appropriate method for handling repetition 4 understand error handling Outcome 2 Understanding Object-Oriented Programming The learner can: 1 Understand the fundamentals of classes 2 Understand inheritance 3 Understand polymorphism 4 Understand encapsulation Outcome 3 Understanding General Software Development The learner can: 1 understand application life cycle management 2 interpret application specifications 3 understand algorithms and data structures Outcome 4 Understanding Web Applications The learner can: 1 understand Web page development 2 understand Microsoft ASP.NET Web application development 3 understand Web hosting 4 understand Web services Outcome 5 Understanding Desktop Applications The learner can: 1 understand Windows® Forms applications 2 understand console-based applications 3 understand Windows Services Outcome 6 Understanding Databases The learner can: 1 understand relational database management systems 2 understand database query methods 3 understand database connection methods
152 IPCD3 V3.1 08072015
MSC9
MTA: Windows Development Fundamentals
153 IPCD3 V3.1 08072015
MSC9 MTA: Windows Development Fundamentals Level: 2 Credit value: 10 Unit aim The aim of this unit is to provide the underpinning knowledge required for the learner to meet the requirements of the relevant Microsoft exam associated with this unit. In order to do that the learner will understand the importance of Windows Development Fundamentals. Learning outcomes There are five outcomes to this unit. The learner will: 1. Understanding Windows programming basics 2. Creating Windows forms applications 3. Creating Windows services applications 4. Accessing data in a Windows forms application 5. Deploying a Windows application
Guided learning hours It is recommended that 80 hours should be allocated for this unit. This may be on a full-time or part-time basis. Details of the relationship to the National Occupational Standards This unit is linked to Discipline 5.2 Software development Endorsement of the unit by a sector or other appropriate body This unit is endorsed by e-skills who are the sector skills council for ICT Evidence Requirements Learners must provide a portfolio of evidence to meet the relevant Microsoft test assessment.
154 IPCD3 V3.1 08072015
MSC9 MTA: Windows Development Fundamentals Learning outcomes and assessment criteria Outcome 1 Understanding Windows Programming Basics The learner can: 1 identify Windows application types 2 implement user interface design 3 create Windows-based applications by using Visual Studio Outcome 2 Creating Windows Forms Applications The learner can: 1 create and handle events 2 understand Windows Forms inheritance 3 understand how to create new controls and extend existing controls 4 validate and implement user input 5 debug a Windows-based application Outcome 3 Creating Windows Services Applications The learner can: 1 create a Windows Services application 2 install a Windows Services application Outcome 4 Accessing Data in a Windows Forms Application The learner can: 1 understand data access methods for a Windows Application 2 understand databound controls Outcome 5 Deploying a Windows Application The learner can: 1 understand Windows application deployment methods 2 create Windows setup and deployment projects
155 IPCD3 V3.1 08072015
Skillsfirst Awards Limited Suite 416 Fort Dunlop Fort Parkway Birmingham B24 9FD Tel - 0121 270 5100 Fax - 0121 747 4102 Website – www.skillsfirst.co.uk