Skidmore Wilhem- Bolt Testing Units
-
Upload
chandrasekhar-sonar -
Category
Documents
-
view
8 -
download
3
description
Transcript of Skidmore Wilhem- Bolt Testing Units
-
Skidmore-Wilhelm aTungsten Capital Partnersbrand.
(216) 481-4774
CalibrationTo ensure consistentperformance, werecommend yearlycalibration for all of ourunits.
Bolt TestingThe main considerations when choosing the properCalibrator are 1) the size (diameter and length) ofthe bolts you will be testing and 2) the type of bolthead (standard/heavy hex or tension control). Youwill need to purchase a plate for eachdiameter of bolt you will be testing and abushing for each diameter AND each type.Please reference our minimum bolt length chart tosee if you will need short bolt plates and bushings.
Model MZ - NewAluminum HeavyDuty - LightweightUnit!This unit is replacing ourModel MS...and its only21 lbs! Designed to testbolts from 1/2" to 1-1/4"English bolts andequivalent metric sizes.This unit will test up to126,000 lbs. Pleasereference the minimumbolt length chart todetermine which platesand bushings you willneed.
Download the instructionmanual or productmanual for the Model MZ.
MODEL HSThis unit is designed forlarger bolt sizes (1" to 1-1/2" and 27MM to42MM).
Download the instructionmanual or productmanual for the Model HS.
Our newestlightweight design isnow available.Learn more.
Model MZ
To ensureconsistentperformance, werecommend yearlycalibration for all ofour units. Pleaseremember to fill outour Calibration/Repair RequestForm to avoid anydelays!
Calibration
Tips whenperforming ROCAPtests using a theSkidmore WilhelmBolt TensionCalibratorLearn more.
ROCAP Tips
Upgrade today tothe new PelicanCase. Click here formore details.
Pelican Case
Come and see us atthese trade showsand seminars. Clickhere for moredetails.
Trade Shows
Page1 of 3Bolt Testing
9/18/2013http://www.skidmore-wilhelm.com/bolt_testing.htm
-
MODEL KOur largest unit! This unitis designed for very largebolts (1-1/2" to 2-1/2"and 36MM to 64MM) Thisunit is used most oftenon Windmill Projects andvery large structures.
Download the instructionmanual or productmanual for the Model K.
MODEL SDesigned for small bolts(#6 to 1/4" and 3MM to6MM).
Download the instructionmanual for the Model S.
MODEL P3/8" Bolts Only -Designed for boltmanufacturers anddistributors todemonstrate thesuperiority of their boltsrelative to thecompetition.
Download the instructionmanual for the Model P.
MODEL JDesigned for a largerrange of small bolts (#10to 1" and 5MM to 18MM)It is fitted with two gagesto enable a larger rangeof testing.
Download the instructionmanual or product
Page2 of 3Bolt Testing
9/18/2013http://www.skidmore-wilhelm.com/bolt_testing.htm
-
Contact us | View site map
manual for the Model J.
Copyright 2013 Skidmore-Wilhelm All Rights ReservedFor more information feel free to Contact UsWebsite created by swhoward design
Page3 of 3Bolt Testing
9/18/2013http://www.skidmore-wilhelm.com/bolt_testing.htm