SK210LC ACERA MARK 9 · The SK210LC Mark 9 offers a Long Reach option dedicated for larger, long...

Operating Weight NET Horsepower Max Digging Depth Bucket Capacity Bucket Breakout Force (SAE)47,840 lbs 159 hp @ 2,000 rpm 22’ 0” .55 to 1.81 cu yd 31,700 lbf (21700 kg) (119 kW @ 2,000 rpm) (6.70 m) (0.42 to 1.38 m3) (141 kN)

SK210LCACERA® MARK 9TIER 4 INTERIM

2

SK210LC

Easy, ground-level servicing offilters, batteries and hydraulics

reduces maintenance time toboost your productivity.

POWER AND PRODUCTIVITY - WITH EVEN BETTER FUEL EFFICIENCYNo one beats Kobelco when it comes to power and productivity. Kobelco has also built a reputation as one of the most fuel efficient excavators in the industry. Now the SK210LC Mark 9, with its unique selective catalytic reduction (SCR) engine technology that is certified for the EPA’s Tier 4 Interim emissions standards, delivers even better perfor-mance, with more power and faster engine response. It does this while delivering better fuel efficiency than the Tier 3 model it replaces, and emerges in a class by itself when compared to fuel efficiency of other brands of excavators for Tier 4 Interim.Powerfully ProductiveThe SK210LC still leads the pack in overall performance. Our proven Tier 4 Interim FPT engine powers our efficient/intelligent hydraulics to deliver:• 10% more productivity with more power and faster cycle times• High engine torque rise to get more work done• Faster engine response, without exhaust gas recirculation to slow it down• Hydraulics tuned for high swing torque and high arm digging forces• Exceptionally fast cycle times for highest productivity

SCR for Tier 4 Interim for Proven Reliability• SCR only treats exhaust, so combustion is optimized for performance and reliability• Simplified version of our proven 6.7L FPT engine used in earlier models• No need for complicated and expensive variable-geometry turbocharger• No regeneration to worry about or diesel particulate filter to replace• SCR with diesel exhaust fluid (DEF) is an excellent choice for working in extreme

temperatures, cold or hot

Improved Fuel Efficiency• Kobelco’s Mark 9 excavators are the most fuel efficient we have ever built• 10% better fuel efficiency with SCR for Tier 4 and optimized intelligent hydraulics

when compared to the previous series • Simplified engine with no EGR, tuned for pure performance and fuel efficiency• New E Mode delivers more fuel efficiency than previous standard mode while still

providing excellent productivity• Control monitor with fuel economy meter showing per-hour fuel consumption, and Eco

Gauge that indicates when machine is being operated in the most efficient manner• Auto-Decel reduces engine rpm after 4 seconds of operator inactivity, extending

engine life and reducing fuel cost

Auto Warm-Up SystemKobelco’s Acera Mark 9 Series feature a fully automatic engine and hydraulic warm up system. This warms up the hydraulic circuit to an optimum 126° F (52° C). This feature improves system efficiency to make you more productive more quickly, and it also helps reduce component wear.

The SK210LC provides superiorbucket and arm digging forces soyou can easily handle the mostdemanding digging conditions.

Large cab features ROPS/FOPS protection and

generous operator comfort features, making it a safer

and more productive place to work.

3

TM

4

UNPARALLELED VISIBILITY AND CONTROLYou can’t perform at your best if you’re not comfortable and confident. Kobelco has gone to extremes to ensure that our customers are at their best when operating our excavators. The SK210LC Mark 9 delivers complete operational control including our upgraded Intelligent Total Control System (ITCS™) with progressive hydraulic acceleration that combines aggressive power and speed with fine control, so every movement is accurate and predictable. An all-new Evo cab with standard ROPS and FOPS protection, full-feature color control monitor and a host of features add to the comfort and convenience. Furthermore, the SK210LC Mark 9, maintains the excellent visibility from a low rear engine cover and the added confidence and productivity from a standard wide-angle rearview camera.Even Better Visibility• Standard wide-angle rearview camera with dedicated

monitor view panel keeps operator informed and productive• Low-profile sheet metal and engine cover provides

excellent visibility to the rear• Repositioned controls and more glass provide better

visibility from sides of the new cab• New standard skylight with sunshade for a better view to overhead obstacles• Moveable front and door windows provide visibility as well as cross-flow ventilation

• Operator is positioned for maximum visibility of all functions and operations

New Mark 9 Evo Cab• New standard cab features rollover (ROPS) and falling object (FOPS) protection• Larger/oversized cab accommodates all sizes of operators, along with plenty of

storage space• New, color, multi-display control monitor includes easy-to-read gauges, alerts and

a full-color view screen dedicated to the rear wide-angle camera• Optional air-suspension seat with heated cushions helps get operators working

early and keeps them comfortable all day• Insulated and isolation-mounted cab for low noise and vibration levels• Standard climate control system with upgraded ventilation gives operators more

adjustment options for air flow• Wide entry/exit area provides easy access to the roomy cab• Analog digital hour meter is positioned so that it can easily be viewed from

ground level, even when machine is turned off• 24 volt to 12 volt converter, with 12 volt power receptacle• Improved ergonomics and convenience features include 2 drink holders and cell

phone pocket• AM/FM stereo with dual speakers is standard

Instrumentation That Is Easy to Read and Adjust• Operators can establish and review service interval reminders for engine oil,

hydraulic oil, fuel and filters• Auxiliary hydraulics can be adjusted from the control monitor to match pressure

and flow for the work tool• Control monitor is repositioned along front pillar of cab to be within easy sight of

operator at all times• Self-diagnostics with fault code memory make it easy to check and adjust system

pressures, engine speed, travel speed, hydraulic pressure and other operating functions

Operators work with confidence and ease with a clear view of the jobsite, enhanced with larger windows, skylight and rearview camera.

SK210LC

5

ROPS/FOPS cab structure includes standard skylight with sunshade for added visibility.

• Work and attachment modes are easy to select and are clearly displayed on the new color control monitor

• Dedicated panels on the control monitor include entry keypad and color view monitor from rearview camera

• New control monitor includes additional features such as fuel economy meter, Eco gauge and diesel exhaust fluid (DEF) gauge

• Warning screens and audible alarms alert you to temperature and pressure status

Heavy-Duty by Design• Long, beefy X-frame offers enhanced stability and balance• Flanged self-lubricating linkage bushings deliver long life with low maintenance• Pumps, valves and piping are optimized for maximum efficiency• Robust lift cylinders ensure maximum rated capacity• Rollers, sprockets and travel motors are sealed for long life• Heavy-duty boom and arm are now standard

Dependable 411 cu. in. (6.73 L) 6-cylinder turbocharged FPT™ engine puts out a maximum 545 ft-lbs (740 N•m) of torque.

The work mode system provides three work modes and two attachment modes to match your

work operations. The control monitor features a large screen for the rearview camera and new

fuel economy measurement graphing.66

High-strength brass bushings embedded with solid lubricant

provide long life and extend intervals for greasing of pins

up to 1000 hours.

The hydraulic feed to the main pumps is positioned to draw fluid from the

side of the hydraulic tank - rather than the tank bottom like many

competitors. The hydraulic system utilizes a high-capacity, small particle

filtration system to provide industry-leading maintenance intervals.

SK210LC

Side-by-side radiator, oil cooler and intercooler can be accessed easily for inspection and cleaning. The side-by-side design allows the components to be removed independently. This means the radiator can be removed for service without draining the hydraulic system.

7

INTELLIGENT HYDRAULICS FOR PERFORMANCE AND EFFICIENCYThe SK210LC Mark 9 maximizes the unique capabilities of its Tier 4 Interim certified FPT engine and optimized hydraulics with our upgraded Intelligent Total Control System (ITCS™).FIVE MODE SELECTIONS

Work Modes: • H Mode Heavy-duty excavation and loading work, gives priority to the workload

at high speed • S Mode Standard digging and loading work, for versatility to most any job • E Mode Economy leverages more of the intelligent hydraulics features to deliver

exceptional fuel efficiency with productivity for normal digging conditions

Attachment Modes: • B Mode Breaker/hammer optimized (1-way hydraulic flow) • A Mode Auxiliary attachment work, such as demolition with crusher/nibbler-

breaker or shear (2-way/2 pump flow)

Intelligent Total Control System (ITCS™)• ITCS™ recognizes your moves and assists by providing power where and when it is needed• Cushioned transitions between functions reduce jerkiness from high-speed movements• Progressive hydraulic acceleration adds smoothness for even faster cycle times• ITCS™ also provides hydraulic sensitivity for fine grading and leveling• Auto-Accel smoothly increases engine rpm and hydraulic flow in direct proportion to the

operator’s movement of the control levers. This results in even, deliberate acceleration for precise applications

• Proportional controls built into the joysticks are available with auxiliary hydraulics• Plug-in electronics are available for easy retrofit of telematics or GPS bucket positioning

Smooth, Powerful HydraulicsKobelco performance features are unmatched by the competition.• Power Boost™ provides 10% more bucket breakout force - on command, without time limit• Heavy Lift provides 10% more lifting and swing capability – on command, without time limit• Independent Travel Circuit is exclusive to North American Kobelco products,

providing dedicated flow for excavator travel• Swing priority automatically dedicates power for swinging heavy loads quickly• Boom and arm holding valves minimize drift for accurate positioning

SK210LC

KOBELCO SOLUTIONS FOR DEMANDING APPLICATIONSAre your jobs sometimes different or demanding? Is what you consider an opportunity what others call a problem? Then rely on Kobelco as your best choice for reliable, cost-effective solutions.

• Long Reach Version - perfect size machine for dredging and bigger ditch cleaning jobs, with 50 feet of reach and 2,623 lbs (1130 kg) heavier counterweight

• High and Wide Undercarriage - wider (11’ 3”), higher, reinforced car body and undercarriage for greater stability, ground clearance and visibility. Great for heavy construction and lifting heavy pipe and trench boxes, and for truck loading

• Severe Duty Undercarriage - reinforced undercarriage with heavy-duty components, recommended for working in forestry, rock or with single grouser track shoes

• Special Application Package - modifications including high and wide undercarriage, reinforced frame, guarding, auxiliary hydraulics with extra rotation pump, and provisions for cab riser, for above-ground applications such as forestry and scrap handling

• Demolition Guarding Package - a complete guarding arrangement for cab, car body and upper for use in demolition, shear and scrap applications

• Slewing Ring Riser - raises upper to allow clearance to work wading into water or for added visibility for above-ground applications

• Auto-Lube System - available for standard front or long reach versions, allows for automatic and more frequent lubrication, recommended for dusty conditions or working below water line

The SK210LC Mark 9 offers a Long Reach option dedicated for larger, long reach jobs. It includes an extra long boom and arm, reinforced structures, heavier counterweight and specially programmed ITCS™ hydraulics — providing the same high level of controllability you expect with a Kobelco machine. Easily converts to a standard reach machine to maximize utilization of your equipment investment.

Kobelco offers an option for a factory-installed autolube system, to more easily keep the machine properly greased, minimize downtime and increase reliability in difficult or dusty applications.

8

9

TM

Designed with attachments in mindKobelco doesn’t just design excavators; we design excavators for use with attachments.

• High capacity hydraulic system is adjustable from inside the cab• Standard one- or two-way auxiliary valve makes it easy to install piping and controls for

auxiliary hydraulics• Two auxiliary hydraulic modes permit switching between one-way and two-way flow

without leaving the cab to manually switch a valve (with auxiliary hydraulics installed)• An optional independent flow ‘extra’ circuit, with dedicated rotary gear pump, provides

flow for multi-function attachments that include grapples or twist buckets• A full selection of buckets, couplers and thumbs are offered to maximize the versatility

of the machine.

SK210LC DIMENSIONS, WEIGHTS & BUCKET SELECTION CHART

ARM LENGTH ft (m) 9’ 8” (2.94 m) 11’ 6” (3.5 m)

A Overall length (w/ attachment) 31’ 2” (9.49) 31’ 0” (9.45)

B Overall width (with 800 mm shoe) 10’ 6” (3.19) 10’ 6” (3.19)

C Overall height (to top of boom) 10’ 2” (3.1) 10’ 4” (3.16)

D Basic machine length 16’ 4” (4.98) 16’ 4” (4.98)

E Overall height (to top of cab) 10’ 0” (3.05) 10’ 0” (3.05)

F Ground clearance of rear end* 3’ 6” (1.06) 3’ 6” (1.06)

G Track on ground 12’ 0” (3.66) 12’ 0” (3.66)

H Overall length of crawler undercarriage 14’ 7” (4.45) 14’ 7” (4.45)

I Undercarriage height at center 37.8” (0.96) 37.8” (0.96)

J Track gauge 7’ 10” (2.39) 7’ 10” (2.39)

K Width of crawler shoe 31.5” (800 mm) 31.5” (800 mm)

L Ground clearance of undercarriage* 17.7” (0.45) 17.7” (0.45)

M Tail swing radius 9’ 0” (2.75) 9’ 0” (2.75)

N Width of upper structure 8’ 11” (2.71) 8’ 11” (2.71)

Operating weight ** lb (kg) 47,840 (21700) 48,099 (21817)

Ground pressure ** psi (kPa) 4.90 (33.78) 4.93 (33.96)

SHOE WIDTH in (mm) 31.5 (800) 35.4 (900)

Machine overall width ft-in (m) 10’ 6” (3.19) 10’ 8” (3.24)

Machine overall length refer to A refer to A

Machine overall height refer to C refer to C

Ground pressure psi (kPa) 4.90 (33.8) 4.41 (30.4)

Operating weight lb (kg) 47,840 (21,700) 48,445 (21,974)

SHOE WIDTH in (mm) 23.6 (600) 27.6 (700)

Machine overall width ft-in (m) 10’ 2” (3.09) 10’ 4” (3.14)

Machine overall length refer to A refer to A

Machine overall height refer to C refer to C

Ground pressure psi (kPa) 6.75 (46.5) 5.53 (38.1)

Operating weight lb (kg) 46,305 (21,003) 47,235 (21,426)

* Excludes height of grouser bar.** With 32 in (800 mm) track shoes, bucket, 165 lb (75 kg) operator, full fuel and standard equipment.

DIMENSIONS SHIPPING MEASUREMENTS : SK210LC with 9’ 8” (2.94 m) arm, 1.22 yd3 (0.93 m3) bucket weighing 1,407 lb (638 kg)

KL

A

C

M

G

BJ

F

HD

I

C E

REFILL CAPACIT IESFuel tank capacity gal (l) 97.7 (370)Diesel exhaust fluid (DEF) tank capacity gal (l) 23.5 (89)Hydraulic tank gal (l) 38.6 (146)Hydraulic system including tank gal (l) 60.8 (230)Cooling system gal (l) 6.9 (26)Engine oil w/ filter gal (l) 5.3 (20)Travel drive (each) gal (l) 0.92 (3.5)Swing drive (gear oil) gal (l) 0.8 3.0

Travel speed (Turtle/Rabbit) 2.3 mph (3.7 km/h) / 3.5 mph (5.7 km/h)Swing speed 0 to 12.8 rpmSwing torque 52,700 lb-ft (71.5 kN•m)Drawbar pulling force 49,907 lbs (222 kN)Gradeability 35 degrees (70%)

PERFORMANCE

SPECIFICATION SUMMARYGENERALOperating weight with bucket lb (kg) 47,840 (21,700)Bucket capacity range (SAE heaped) cu yd (m3) 0.55 to 1.81 (0.42 to 1.38)Counterweight lb (kg) 10,205 (4,629)

HYDRAULIC SYSTEMHydraulic pumps Number & type 2 VP + 1 FGRated oil flow US gal/min (L/min) 2 x 58.1 (2 x 220)Pilot pump output US gal/min (L/min) 1 x 5.3 (1 x 20)Operating pressure:

Implement psi (MPa) 4,970 (34.3)Travel psi (MPa) 4,970 (34.3)Swing psi (MPa) 4,210 (29.0)Power Boost/Heavy lift psi (MPa) 5,480 (37.8)Pilot control circuit psi (MPa) 725 (5.0)

10

ENGINEMake and Model FPT ™ FPT F4HFE613S*A003

Type

Displacement in3 (L) 411 (6.73)Bore/Stroke in (mm) 4.1 x 5.2 (104 x 132)Net horsepower - SAE J1349 hp (kW) @ rpm 159 @ 2000 (119 @ 2000)

Gross maximum torque - SAE J1349 lb-ft (N•m) @ rpm 545 @ 1400 (740 @ 1400)

Engine oil operation angle ratings: Side-to-side Fore and aft

Rated 35°Rated 35°

Oil Does not require low ash oil

FuelDoes not require ultra low-sulfur fuel

B5 biodiesel tolerant

Water-cooled, 4-cycle, 6-cylinder direct injection type diesel engine with intercooler turbo-charger, electronic common rail, Tier 4 Interim Certified (SCR)

TM

Standard OptionalARM ft-in (m) 9’ 8” (2.94) 11’ 6” (3.5)Arm crowding force (w/PowerBoost) SAE lb (kN) 24,500 (109) 22,100 (98.5)

Bucket breakout force (w/PowerBoost) SAE lb (kN) 31,700 (141) 31,700 (141)

DIGGING FORCES

This chart is a graphic representation of the working ranges for the SK210LC equipped with a 9’ 8” (2.94 m) arm.

B

ft(m)

35'(10.66)

30' (9.14)

30'(9.14)

25'(7.62)

20'(6.10)

15'(4.57)

10'(3.05)

25' (7.62)

20' (6.10)

15' (4.57)

10' (3.05)

5'(1.52)

35' (10.66)

-5' (1.52)

-10' (3.05)

-15' (4.57)

-20' (6.10)

-25' (7.62)

G

J

I

H

F

K

E

D

C

A1

A

SK210LC SPECIFICATIONS, LIFT CAPACITIES — Long Reach

Standard OptionalATTACHMENTS ft-in (m) 9’ 8” (2.94 m) 11’ 6” (3.5 m)

A Max digging reach 32’ 6” (9.90) 33’ 11” (10.34)A1 Max digging reach at ground level 31’ 11” (9.73) 33’ 4” (10.17)B Max digging depth 22’ 0” (6.70) 23’ 10” (7.26)C Max reach height 31’ 11” (9.72) 32’ 0” (9.75)D Max dump clearance 22’ 8” (6.91) 22’ 10” (6.97)E Min dump clearance 7’ 12” (2.43) 6’ 2” (1.87)F Max vertical wall digging depth 20’ 0” (6.10) 21’ 3” (6.47)G Min front swing radius 11’ 7” (3.54) 11’ 5” (3.48)H Height at min front swing radius 25’ 2” (7.68) 25’ 4” (7.72)I Digging depth at 8’ (2.4 m) flat bottom 21’ 5” (6.52) 23’ 3” (7.08)J Leveling stroke at ground level 7’ 5” (2.27) 6’ 3” (1.9)K Bucket rotation 185° 185°

WORKING RANGES

Measurements shown are for machines equipped with the 1.05 cu. yd. (0.80 m3) bucket.

11

TM

A Reach swing centerline to bucket hookB Bucket hook height above/below groundC Lifting capacities in pounds and kilograms

• At heavy lift pressure: 5,480 psi (37.8 MPa)

Rating over front Rating over side / 360 degrees

L IFT ING CAPACITY – LONG REACH version with 35.5” (900 mm) triple grouser shoeBased on machine equipped with – Long Reach Arm: 20’ 10” (6350 mm) Long Reach Boom: 28’ 8” (8750 mm) Bucket: SAE heaped 0.59 cu. yd. (0.45 m3) bucket. Bucket Weight: 1,235 lbs. (560.2 kg)

ALIFT POINT RADIUS

AT MAX REACH5’ (1.5 m) 15’ (4.6 m) 25’ (7.6 m) 35’ (10.7 m) 45’ (13.7 m)

B C RADIUS

40’ lb 1,653 *1,653 33’ 10”(12.2 m) kg 750 *750 (10.33 m)

30’ lb 1,382 *1,382 41’ 7”(9.1 m) kg 627 *627 (12.69 m)

20’ lb *5,309 4,947 *2,531 *2,531 1,347 *1,347 46’ 0”(6.1 m) kg *2,408 2,244 *1,148 *1,148 611 *611 (14.02 m)

10’ lb *8,413 8,036 *6,303 4,339 *4,103 2,463 1,468 *1,468 47’ 11”(3.0 m) kg *3,816 3,645 *2,859 1,968 *1,861 1,117 666 *666 (14.60)Ground lb *14,548 13,327 10,699 6,561 6,232 3,717 4,010 2,202 1,755 *1,755 47’ 8”Level kg *6,599 6,045 4,853 2.976 2,827 1,686 1,819 999 796 *796 (14.53 m)–10’ lb *6,620 *6,620 *13,946 12,059 9,782 5,723 5,787 3,298 *3,536 2,050 2,313 1,978 45’ 3”

(-3.0 m) kg *3,003 *3,003 *6,326 5,470 4,437 2,596 2,625 1,496 *1,604 930 1,049 897 (13.79 m)–20’ lb *11,032 *11,032 *18,993 12,231 9,603 5,562 5,699 3,214 3,536 2,524 40’ 3”

(-6.1 m) kg *5,004 *5,004 *8,615 5,548 4,356 2,523 2,585 1,458 1,604 1,145 (12.27 m)–30’ lb *16,204 *16,204 *14,284 13,219 *8,832 6,001 *5,831 4,087 31’ 6”

(-9.1 m) kg *7,350 *7,350 *6,479 5,996 *4,006 2,722 *2,645 1,854 (9.60 m)

Notes:1. Do not attempt to lift or hold any load that exceeds these rated values at their specified load

radii and heights. Weight of all accessories must be deducted from the above lifting capacities.2. Lifting capacities assume a machine standing on a level, firm, and uniform supporting

surface. Operator must make allowance for job conditions such as soft or uneven ground, out of level conditions, side loads, sudden stopping of loads, hazardous conditions, inexperienced personnel, weight of various other buckets, lifting slings, attachments, etc.

3. Ratings at bucket lift hook.

4. The above rated loads are in compliance with SAE Hydraulic Excavator Lift Capacity Standard J 1097. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Rated loads marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load.

5. Operator should be fully acquainted with the Operator’s and Maintenance Manuals before operating this machine. Rules for safe operation of equipment should be followed at all times.

6. Capacities apply only to the machine as originally manufactured and normally equipped by KOBELCO Construction Machinery America LLC.










LIFTING CAPACITY – 31.5” (800 mm) triple grouser shoe

LIFTING CAPACITY – 27.6” (700 mm) triple grouser shoe

Based on machine equipped with – Standard Arm: 9’ 8” (2940 mm) Standard Boom: 18’ 6” (5650 mm) Bucket: SAE heaped 1.22 cu. yd. (0.93 m3) bucket. Bucket Weight: 1,407 lbs. (638 kg)

Based on machine equipped with – Standard Arm: 9’ 8” (2940 mm) Standard Boom: 18’ 6” (5650 mm) Bucket: SAE heaped 1.22 cu. yd. (0.93 m3) bucket. Bucket Weight: 1,407 lbs. (638 kg)

SK210LC LIFT CAPACITIES — 9’ 8” (2940 mm) Standard Arm


12

LIFT POINT RADIUSAT MAX. REACHA 5’ (1.5 m) 10’ (3.0 m) 15’ (4.6 m) 20’ (6.1 m) 25’ (7.6 m)

B C RADIUS

25’ lb *7,990 *7,990 *7,110 *7,110 20’ 5”(7.6 m) kg *3,620 *3,620 *3,220 *3,220 (6.23 m)

20’ lb *11,270 11,050 *6,690 *6,690 24’ 2”(6.1 m) kg *5,110 5,010 *3,030 *3,030 (7.37 m)

15’ lb *12,420 10,620 *10,210 7,150 *6,690 6,410 26’ 5”(4.6 m) kg *5,630 4,810 *4,630 3,240 *3,030 2,900 (8.06 m)

10’ lb *28,490 *28,490 *18,240 15,830 *14,300 9,990 11,140 6,870 *7,020 5,710 27’ 8”(3.0 m) kg *12,920 *12,920 *8,270 7,180 *6,480 4,530 5,050 3,110 *3,180 2,590 (8.43 m)

5’ lb *17,460 *17,460 *22,200 14,480 15,470 9,350 10,790 6,550 *7,700 5,430 27’ 11”(1.5 m) kg *7,910 *7,910 *10,070 6,570 7,010 4,240 4,890 2,970 *3,490 2,460 (8.51 m)Ground lb *19,420 *19,420 24,060 13,670 14,940 8,880 10,520 6,300 *8,920 5,500 27’ 3”Level kg *8,800 *8,800 10,910 6,200 6,770 4,020 4,770 2,860 *4,040 2,490 (8.30 m)–5’ lb *17,010 *17,010 *27,300 26,470 23,720 13,390 14,680 8,660 10,420 6,210 10,050 6,000 25’ 7”

(-1.5 m) kg *7,710 *7,710 *12,380 12,000 10,750 6,070 6,660 3,920 4,720 2,810 4,560 2,720 (7.80 m)–10’ lb *25,890 *25,890 *32,510 26,890 *22,610 13,490 14,740 8,710 12,140 7,250 22’ 8”

(-3.0 m) kg *11,740 *11,740 *14,740 12,190 *10,250 6,110 6,680 3,950 5,500 3,280 (6.92 m)–15’ lb *24,850 *24,850 *17,670 13,980 *13,950 10,580 18’ 0”

(-4.6 m) kg *11,270 *11,270 *8,010 6,340 *6,320 4,790 (5.50 m)


B C RADIUS

25’ lb *7,990 *7,990 *7,110 *7,110 20’ 5”(7.6 m) kg *3,620 *3,620 *3,220 *3,220 (6.23 m)

20’ lb *11,270 10,920 *6,690 *6,690 24’ 2”(6.1 m) kg *5,110 4,950 *3,030 *3,030 (7.37 m)

15’ lb *12,420 10,490 *10,210 7,060 *6,690 6,320 26’ 5”(4.6 m) kg *5,630 4,760 *4,630 3,200 *3,030 2,860 (8.06 m)

10’ lb *28,490 *28,490 *18,240 15,640 *14,300 9,860 10,990 6,770 *7,020 5,630 27’ 8”(3.0 m) kg *12,920 *12,920 *8,270 7,090 *6.480 4,470 4,980 3,070 *3,180 2,550 (8.43 m)

5’ lb *17,460 *17,460 *22,200 14,300 15,270 9,220 10,640 6,450 *7,700 5,340 27’ 11”(1.5 m) kg *7,910 *7,910 *10,070 6,480 6,920 4,180 4,820 2,920 *3,490 2,420 (8.51 m)Ground lb *19,420 *19,420 23,740 13,490 14,730 9,750 10,370 6,210 *8,920 5,410 27’ 3”Level kg *8,800 *8,800 10,770 6,110 6,680 3,970 4,700 2,810 *4,040 2,450 (8.30 m)–5’ lb *17,010 *17,010 *27,300 26,130 23,400 13,200 14,480 8,530 10,270 6,110 9,910 5,910 25’ 7”

(-1.5 m) kg *7,710 *7,710 *12,380 11,850 10,610 5,990 6,560 3,870 4,650 2,770 4,490 2,680 (7.80 m)–10’ lb *25,890 *25,890 *32,510 26,550 *22,610 13,300 14,540 8,580 11,970 7,140 22’ 8”

(-3.0 m) kg *11,740 *11,740 *14,740 12,040 *10,250 6,030 6,590 3,890 5,420 3,230 (6.92 m)–15’ lb *24,850 *24,850 *17,670 13,790 *13,950 10,440 18’ 0”

(-4.6 m) kg *11,270 *11,270 *8,010 6,250 *6,320 4,730 (5.50 m)










LIFTING CAPACITY – 31.5” (800 mm) triple grouser shoeBased on machine equipped with – Long Arm: 11’ 6” (3500 mm) Standard Boom: 18’ 6” (5650 mm) Bucket: SAE heaped 1.22 cu. yd. (0.93 m3) bucket. Bucket Weight: 1,407 lbs. (638 kg)

LIFTING CAPACITY – 27.6” (700 mm) triple grouser shoeBased on machine equipped with – Long Arm: 11’ 6” (3500 mm) Standard Boom: 18’ 6” (5650 mm) Bucket: SAE heaped 1.22 cu. yd. (0.93 m3) bucket. Bucket Weight: 1,407 lbs. (638 kg)


SK210LC LIFT CAPACITIES — 11’ 6” (3500 mm) Long Arm

1312


B C RADIUS

25’ lb *6,190 *7,110 22’ 3”(7.6 m) kg *2,800 *3,220 (6.79 m)

20’ lb *7,170 *7,170 *5,880 *6,690 25’ 9”(6.1 m) kg *3,250 *3,250 *2,660 *3,030 (7.85 m)

15’ lb *11,150 10,760 *10,210 7,210 *5,910 5,800 27’ 11”(4.6 m) kg *5,050 4,880 *4,630 3,270 *2,680 2,630 (8.51 m)

10’ lb *16,300 16,190 *13,130 10,090 11,160 6,870 *6,210 5,180 29’ 0”(3.0 m) kg *7,390 7,340 *5,950 4,570 5,060 3,110 *2,810 2,340 (8.85 m)

5’ lb *27,200 *27,200 *20,660 14,690 *15,300 9,380 10,760 6,510 *6,820 4,910 29’ 3”(1.5 m) kg *12,330 *12,330 *9,370 6,660 *6,940 4,250 4,880 2,950 *3,090 2,220 (8.93 m)Ground lb *9,040 *9,040 *21,740 *21,740 23,590 13,670 14,880 8,820 10,420 6,200 *7,870 4,940 28’ 7”Level kg *4,100 *4,100 *9,850 *9,850 10,690 6,200 6,750 4,000 4,720 2,810 *3,560 2,240 (8.73 m)–5’ lb *15,800 *15,800 *26,620 26,060 23,540 13,210 14,530 8,500 10,230 6,030 9,050 5,320 27’ 1”

(-1.5 m) kg *7,160 *7,160 *12,070 11,820 10,870 5,990 6,590 3,850 4,640 2,730 4,100 2,410 (8.25 m)–10’ lb *23,100 *23,100 *34,600 26,300 23,360 13,170 14,470 8,440 10,650 6,280 24’ 4”

(-3.0 m) kg *10,470 *10,470 *15,690 11,930 10,590 5,970 6,560 3,830 4,830 2,840 (7.43 m)–15’ lb *32,050 *32,050 *28,340 *27,030 19,720 13,510 *13,880 8,720 *13,730 8,640 20’ 1”

(-4.6 m) kg *14,530 *14,530 *12,850 *12,260 8,940 6,120 *6,290 3,950 *6,220 3,910 (6.13 m)–20’ lb *13,280 *13,280 12’ 9”

(-6.1 m) kg *6,020 *6,020 (3.88 m)


B C RADIUS

25’ lb *6,190 *7,110 22’ 3”(7.6 m) kg *2,800 *3,220 (6.79 m)

20’ lb *7,170 *7,170 *5,880 *6,690 25’ 9”(6.1 m) kg *3,250 *3,250 *2,660 *3,030 (7.85 m)

15’ lb *11,150 10,640 *10,210 7,110 *5,910 5,720 27’ 11”(4.6 m) kg *5,050 4,820 *4,630 3,220 *2,680 2,590 (8.51 m)

10’ lb *16,300 16,010 *13,130 9,970 11,010 6,780 *6,210 5,100 29’ 0”(3.0 m) kg *7,390 7,260 *5,950 4,520 4,990 3,070 *2,810 2,310 (8.85 m)

5’ lb *27,200 *27,200 *20,660 14,510 *15,300 9,260 10,610 6,410 *6,820 4,830 29’ 3”(1.5 m) kg *12,330 *12,330 *9,370 6,580 *6,940 4,190 4,810 2,900 *3,090 2,190 (8.93 m)Ground lb *9,040 *9,040 *21,740 *21,740 23,300 13,490 14,690 8,690 10,270 6,160 *7,870 4,850 28’ 7”Level kg *4,100 *4,100 *9,850 *9,850 10,560 6,110 6,660 3,940 4,660 2,760 *3,560 2,190 (8.73 m)–5’ lb *15,800 *15,800 *26,620 25,720 23,220 13,020 14,320 8,370 10,080 5,930 8,910 5,230 27’ 1”

(-1.5 m) kg *7,160 *7,160 *12,070 11,660 10,530 5,900 6,490 3,790 4,570 2,690 4,040 2,370 (8.25 m)–10’ lb *23,100 *23,100 *34,600 25,960 23,170 12,990 14,270 8,320 10,500 6,180 24’ 4”

(-3.0 m) kg *10,470 *10,470 *15,690 11,770 10,510 5,890 6,470 3,770 4,760 2,800 (7.43 m)–15’ lb *32,050 *32,050 *28,340 26,690 *19,720 13,320 *13,880 8,600 *13,730 8,520 20’ 1”

(-4.6 m) kg *14,530 *14,530 *12,850 12,100 *8,940 6,040 *6,290 3,900 *6,220 3,860 (6.13 m)–20’ lb *13,280 *13,280 12’ 9”

(-6.1 m) kg *6,020 *6,020 (3.88 m)

14

TM

SK210LC Standard Equipment and Attachments

15

STANDARD EqUIPMENT ENGINE• Engine by FPT™ model F4HFE613S*A003• Tier 4 Interim Certified (SCR)• Engine shuts down automatically for low oil pressure• Auto warm-up function of engine and hydraulic system• Dual element air cleaner with service indicatorHYDRAULICS• Heavy Lift and Power Boost “without time limit”• Swing shockless valve• Swing priority (trenching system) functions automatically• Swing and travel automatic parking brakes• Auxiliary valve with flow control• Boom and arm holding (anti-drift) valves• Travel — two speed with automatic shift and travel alarm• Straight travel system• Independent travel• Proportional auto acceleration system• Self-lubricated bushings for boom foot and cylinder mountings• Self-lubricated bushing with flanged insert at arm end• Counterweight 10,228 lb (4639 kg)UNDERCARRIAGE• Hydraulic track adjusters with cushion springs• Track shoes: 32 in (800 mm) triple grouser shoes• Strutted links, lifetime-sealed and lubricated• Undercarriage master links• Lifetime-lubricated track rollers, idlers and sprocketsOPERATOR STATION• Cab with ROPS and FOPS protective structures• Cab structures compliant per ISO 12177-2 and ISO 10262• Control monitor with color screen displays: Rearview camera Mode selection Gauges for coolant temperature Fuel tank Diesel exhaust fluid tank Fuel economy Menu functions for: Fuel economy graphing Maintenance schedules System status Engine preheat Low engine oil pressure Engine coolant temperature Air cleaner restriction

• Sound insulated, with viscous silicon-filled mounts• Suspension seat — 7-way adjustable with safety belt• Two-lever control for boom, arm, bucket and swing, pilot operated• Hydraulic control lever lock• Removable travel levers with toe tabs• Rearview camera and monitor• Tinted skylight with sunshade• Windshield wiper• Climate control air conditioner, heater, defroster• AM/FM stereo with speakers• Power outlet, 24-volt to 12-volt converter• Cab dome light

• Service diagnostics Computer system displays 68 service items 60-event fault code memory, accessible from cab• Removable floor mat• Cigarette lighter and ashtray• In-cab service diagnostics system, displays 68 service items 60 event fault codes• Audible warning system for High coolant temperature Low engine oil pressure Clogged air filter Oil replacement intervalELECTRICAL• Heavy-duty batteries (2 x 12 volt 100 AH, 800 CCA)• 70-amp alternator• Starting system for low temperature with motor 24V-4.0 kW

(5.36 hp)• Electric horn• Swing flashers recessed into counterweight• Work lights Three front lights right/left sides of boom at mid length and on right side at front of tool box Two rear lights recessed into counterweight right / left sides

ATTACHMENTS• Boom 18 ft 6 in (5.65 m) with hydraulic hoist cylinders 28 ft 8 in (8.75 m) long reach version• Arm 9 ft 8 in (2.94 m) with vertical ribbed rock guard 7 ft 10 in (2.40 m) with vertical ribbed rock guard 11 ft 6 in (3.50 m) with vertical ribbed rock guard 20 ft 10 in (6.35 m) long reach version• Buckets 24-54 inches, 0.55-1.81 yd3 capacity• Quick couplers• Control pattern changer (ISO/BHL)• Single pedal travel• Special applications conversion package includes 13,712 lb

(6220 kg) counterweight• Combined one-two way auxiliary hydraulic piping• Independent pump auxiliary rotation hydraulic system• Long reach (50 ft) with heavier counterweight, 12,806 lbs (5809 kg)• Severe duty undercarriage (standard width)• Track shoes 23.6” (600 mm) triple bar grouser 27.6” (700 mm) triple bar grouser 27.6” (700 mm) double bar grouser 31.5” (800 mm) single bar grouser 35.4” (900 mm) triple bar grouser• Belly pan guard• Boom and arm load (lock) valves• Auto-lube system• Vandalism guards• Angle guards for sheet metal• Demolition guarding package• High & wide lower• Heated air suspension seat

Feel the passion we’ve built into the new Kobelco SK210LC excavator. If you demand productivity, performance and control, see your nearest Kobelco dealer today, or use our dealer locator at www.kobelcoamerica.com to find the dealer nearest you.

Battery chargingFuel levelCPU error and tachometerAutodecelOne / two pump auxiliary hydraulicsSwing flashers

WORLD CLASS PRODUCTS DEMAND WORLD CLASS DEALERS

Kobelco Construction Machinery America LLC700 State StreetRacine, WI 53404 USA

www.kobelcoamerica.com

Products represented in this brochure may include optional equipment.

Note: Due to our policy of continual product improvement, all design, materials and/or specifications are subject to change without advance notice and without liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas.

Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator’s Manual before using the equipment. Pay close attention to all safety and operating decals and never operate machinery without all shields, protective devices and structures in place.

© 2012 CNH America LLC. All rights reserved. Kobelco is a brand licensed to Kobelco Construction Machinery Company America LLC. Any trademarks referred to herein, in association with goods and/or services of companies other than CNH America LLC, are the property of those respective companies. STOCK #KOB201204SK210-9 • PRINTED IN U.S.A.

The purchase of a Kobelco excavator isn’t the end, it’s the beginning of our relationship together. Consider your local

Kobelco dealer as your partner in productivity who will work with you to supply your business needs. Whether you

need assistance in selecting the right model for your operation or developing an affordable leasing or financing plan,

your Kobelco dealer can offer you sound advice because he has decades of heavy equipment experience.

Downtime can happen at any time. And that’s the best time to know you’ve got your

Kobelco dealer’s full service capabilities, the ‘one stop shop’ is just down the street.

Genuine Kobelco parts and all makes parts coverage, where and when you need

them. Factory-trained service technicians, warranty experts and parts manager

who are excavator experts. Fully equipped service vehicles which can bring

responsive support to you quickly, to get you back up and running. Even

customized professional maintenance programs, operator and technical training.

You want your Kobelco equipment investment to be productive and keep your

operation moving. So do we.

Your business deserves nothing less than world class product, supported by a world

class business partner. That’s your Kobelco dealer—your partner in productivity.

SK210LC ACERA MARK 9 · The SK210LC Mark 9 offers a Long Reach option dedicated for larger, long...

Documents

Transcript of SK210LC ACERA MARK 9 · The SK210LC Mark 9 offers a Long Reach option dedicated for larger, long...