SIUI ultrasonic equipment.
Transcript of SIUI ultrasonic equipment.
SIUI ultrasonic equipment.
Best solutions for PAUT and TOFD inspections
Types of ultrasonic testing
Manual UT
Manual UT with recording results
Mechanized UT
Automated UT
Corrosion Testing
UT or PAUT
UT or PAUT
UT / PAUT / TOFD
UT / PAUT / TOFD
PAUT
Solutions for manual UT
Solution for manual UT with recording results
SyncScan + PA probe + PES-02 scanner
Solution for Manual UT
SyncScan + PA probe
ULTRASONIC INSPECTIONSIN ALL INDUSTRIES
Solutions for Mechanized UT
with PA and TOFD technique
Inspection of welded joints and the base metal ofpressure vessels and tanks, pipes with diameters over
150 mm using the PTS-P05 scanner
Inspection with PA probes
Inspection with TOFD probes
Inspection with CRW probes
SyncScan + PTS-P05 scanner + CRW probes
SyncScan + PTS-P05 scanner + PA probes
SyncScan + PTS-P05 scanner + TOFD probes
ULTRASONIC INSPECTIONSIN ALL INDUSTRIES
Solutions for Mechanized UT
with PA and TOFD technique
PA and TOFD Inspection on Small Diameter Pipe
using the LPS-01/02 scanner
Inspection with PA probes
SyncScan + LPS-01/02 + PA probes
Inspection with TOFD probes
SyncScan + LPS-02 + TOFD probes
ULTRASONIC INSPECTIONSIN ALL INDUSTRIES
Inspection of welded joints and the base metal of pressure vessels and tanks, pipes with diameters over 168 mm, Pipe Elbows using the TSE-03 scanner
PA/TOFD Inspection on Pipe Elbows
PA/TOFD Inspection of pressure vessels and tanks
PA/TOFD Inspection pipes with diameters over 168 mm
Solutions for Mechanized UT
with PA and TOFD technique
SyncScan + TSE-03 scanner + PA and TOFD probes
SyncScan + TSE-03 scanner + PA / TOFD probes
SyncScan + TSE-03 scanner + PA and TOFD probes
ULTRASONIC INSPECTIONSIN ALL INDUSTRIES
PA/TOFD/CRW Inspection of pressure vessels and tanks
PA/TOFD/CRW Inspection of Long-Distance pipelines
The MSCAN-SUPOR is a complete solution for ultrasonic testing of welded joints of Long-Distance pipelines with a diameter of 500 mm and a wall thickness of 8
mm or more, welds of vessels and tanks
Solutions for Mechanized UT
with PA and TOFD technique
SyncScan + UHTS-X02 scanner + PA/TOFD/CRW probes
SyncScan + UHTS-X02 scanner + PA/TOFD/CRW probes
ULTRASONIC INSPECTIONSIN ALL INDUSTRIES
Solutions for Mechanized UT
with PA and TOFD technique
PA/TOFD/CRW Inspection of welded joints of Long-distance pipelines with diameters from 100 mm to 1000 mm using a CPS-02
scanner and from 1000 mm to 1420 mm using a CPS-01 scanner
PA/TOFD Inspection of pipelines Ø 100 to Ø 1000 mm
SyncScan + CPS-02 + PA/TOFD/CRW probes
PA/TOFD Inspection of pipelines Ø 1000 to Ø 1420 mm
SyncScan + CPS-02 + PA/TOFD/CRW probes
ULTRASONIC INSPECTIONSIN ALL INDUSTRIES
Solutions for Corrosion Testing
Composite Materials Inspection
SyncScan + WPS-01 scanner
Phased Array Inspection on Corrosion
SyncScan + MPS-02 scanner
PA Solution for Immersion Pipeline Testing
SyncScan + MPS-01А scanner
ULTRASONIC INSPECTIONSIN ALL INDUSTRIES
Solutions for Automated UT
with PA and TOFD technique
Automated UT of welded joints of Long-distance pipelines, pressure vessels and tanks using motorized devices
Inspection of Long-Distance pipelines, pressure vessels and tanks
Inspection of Long-Distance pipelines
SyncScan + СPS-01/02 scanner + motorized device + PA/TOFD probes
SyncScan + TWN-26 scanner + motorized device + PA/TOFD probes
ULTRASONIC INSPECTIONSIN ALL INDUSTRIES
Own manufacture equipment
Portable ultrasonic Phased Array flaw detector
AlfaScan
Basic performance specifications:
• PA 32:128 PR• 2 independent channels for TOFD/UT detection• Embedded Focal Law Calculator• Моделирование объектов контроля• Optional Display Mode of А/В/S/C/TOFD offline 3D • Fast calibration of Velocity/Wedge delay/Sensitivity/TCG• The user interface is easy to learn and use• User-friendly software • Automatic creation of inspection reports
Different Scanners for PA/TOFD inspection
Own manufacture equipment
Probes and Wedges
UT probes
PA probes
TOFD probes
Wedges for PA and TOFD probes
Own manufacture equipment
Own manufacture equipment
Customized calibration blocks: production of calibration
blocks according to customer requirements and drawings
PAUT and TOFD standard blocks: production of calibration
blocks according to ASME, API, EN ISO 9712, etc.
Production of blocks with real flaws
Manufacture of NDT blocks
Siui-ndt.rutwn-technology.com
Thanks!