SITE WORKS CATALOG
Transcript of SITE WORKS CATALOG
SITE WORKS CATALOG
Utica1300 Stark St. • Utica, NY 13502
Ph: (315) 724-7119 • Fax: (315) 724-0171
Watertown22696 Murrock Circle • Watertown, NY 13601
Ph: (315) 788-2612 • Fax: (315) 785-0361
Syracuse6300 E. Molloy Rd. • E. Syracuse, NY 13057Ph: (315) 671-4400 • Fax: (315) 671-4404
Commercial grade products to help you build fromthe ground up.
Utica1300 Stark St. • Utica, NY 13502
Ph: (315) 724-7119 • Fax: (315) 724-0171
Watertow22696 Murrock Circle • Wat
Ph: (315) 788-2612 • Fax: (
GeotextileErosion ControlDrainageConcrete CuringEquipment & Tools
SALES • SERVICE • RENTALS
UTICA1300 Stark StreetUtica, N.Y. 13502Phone: (315) 724-7119Fax: (315) 724-0171
SYRACUSE6300 E. Molloy Rd.E. Syracuse, N.Y. 13057Phone: (315) 671-4400Fax: (315) 671-4044
Watertown22696 Murrock CircleWatertown, N.Y. 13601Phone: (315) 788-2612Fax: (315) 785-0361
Visit us online atwww.MQB.com
Table of Contents
Geotextiles ................................................ 1-2
Erosion Control ......................................... 3-4
Concrete Curing ........................................ 4
Drainage .................................................... 5-7
Lasers & Accessories ............................... 8-9
Construction Equipment ...........................10-12
Measuring Tools & Accessories ............... 13-15
Serving Construction,
Municipal and Industrial Needs...View our full-line catalog on the Web site and get GSA
and OGS pricing and schedule information.
GeotextilesFX® Slit-Film Woven GeotextileCarthage Mills' FX Series of woven slit film geotextiles offer immediate and cost effective solutions for most separation and many stabilization applications. By providing and maintaining separation of the aggregate and subgrade soils, the system life of both paved and unpaved roadways is extended significantly.
In unpaved applications, the aggregate remains useful throughout the entire life of the job, and access to work sites remains trouble free through all types of weather. Stabilization is provided primarily by their high strength at low elongation that distributes loads and reduces or eliminates rutting.
FX Slit-Film Series of woven geotextiles are produced of 100% high-tenacity polypropylene yarns. They are inert to biological degradation and resistant to naturally encountered chemicals, alkalis and acids.
Applications• Wrapped-face retaining walls• Foundation stabilization• Daily landfill covers• Separation under driveways and streets, parking, storage
and staging areas, roadways, airport runways, pavingblocks, and access/haul roads
FX-55 A medium weight geotextileand the one most frequently used inDOT and private engineered projects.
FX-66 A heavier weight geotextile typically used when higher than average stabilization is required.
Product Description
Product Specification
PROPERTY
Minimum Average Roll Values
FX-50 FX-55 FX-60 FX-65 FX-66
Grab Tensile Strength (Ib)ASTM D-4632 (warp/fill) 180 200 250 270 315
Elongation (%) MinimumASTM D-4632 15 15 15 15 15
Trapezoid Tear (Ib)ASTM D-4533 70 75 90 100 115
Mullen Burst (psi)ASTM D-3786 305 400 500 400 630
Puncture Strength (Ib)ASTM D-4833 70 95 100 100 120
Permittivity (1/sec)ASTM D-4491 .05 .05 .05 .05 .05
Water Flow Rate (g/m/sf)ASTM D-4491 4 4 4 4 4
Percent Open AreaCEO-22125 <1 <1 <1 <1 <1
AOS (U.S. Std. Sieve)ASTM D-4751 20 40 40 40 40
UV Resistance (% at 500 hr)ASTM D-4355 70 70 70 70 70
Item # Code Width (ft) Length (ft) Area(yd2)
ApproximateWeight (Ib) Stock*
FX50 GEO — — — — A
FX55-126R-600 GEO 12.5 432 600 210 Y
FX55-176R-600 GEO 17.5 309 600 215 Y
FX60-126R-600 GEO 12.5 432 600 210 Y
FX60-176R-600 GEO 17.5 309 600 215 Y
FX65 GEO — — — — A
FX66-176R GEO 17.5 258 500 217 Y
Carthage Mills' 6%™ Open Area Series of Woven Monofilament GeotextilesCarthage Mills' 6% Series of woven monofilament geotextiles provide long-term solutions for nearly any drainage/filtration application. Carthage 6% features unique physical, hydraulic and filtration properties—in particular Percent Open Area (POA), an indicator that a sufficient quantity of distinct, measurable, uniform and unidirectional paths through the fabric exist to allow for the release of migrating fines and for the formation of a mini-graded filter cakeagainst the surface of the free-flowing filter fabric.
Applications• Bulkheads• Under riprap or concrete revetment systems for channel,
shoreline waterway protection• Subsurface drainage systems in problematic soils• Drainage/filtration/collection systems in landfills• Spillways and swales
1
Item # Code
Width xLength
(ft)Area(yd2)
Appx.Weight
(Ib)
Grab Tensile
StrengthASTM
D-4632(warp/fill)
(Ib)
ElongationMinimum
ASTM D-4632
(%)
TrapezoidTear
ASTM D-4533
(Ib)
MullenBurst ASTM
D-3786(psi)
PunctureStrength
ASTM D-4833
(Ib)
Permittivity ASTM
D-4491(1/sec)
WaterFlow Rate
ASTM D-4491(g/m/sf)
PercentOpenAreaCEO-22125
AOS(U.S.Std.
Sieve)ASTM
D-4751
UV Resistance
ASTM D-4355
(% at 500hr) Stock*
CARTHAGE-6%-12R GEO 12x300 400 181 250 15 60 450 120 .28 18 6% 70 90 Y
Site Works Catalog
GeotextilesFX®–HS Nonwoven GeotextileCarthage Mills' FX–HS Series of nonwoven slit film geotextiles offer immediate and costeffective solutions for many separation, drainage, erosion control and filtrationapplications. Carthage Mills' FX–HS Series of nonwoven slit film geotextiles are constructed of 100% polypropylene staple filaments that have been needle-punched andheat-set for stability. Weights range from three to more than 30 ounces per square yard.Carthage Mills' FX–HS Series of nonwoven slit film geotextiles exhibit high durability withexcellent resistance to puncture and tear, yet easily conform to the ground and siteirregularities for trouble-free installation.
Applications• Subsurface drainage applications or systems along
highways, under airfields and athletic fields, andwithin embankments
• Filtration/drainage in Segmental Retaining Walls (SRW)• Separation under roadways, airport runways, access/haul roads
and railroad ballast• Permanent erosion control
under riprap for slope andshoreline protection
• Site dewatering bags• Landfill drainage and filtration• Subsurface barriers
Product Description
Product Specification
PROPERTY
Minimum Average Roll Values
FX-35HS FX-45HS FX-60HS FX-80HS FX-100HS
Grab Tensile Strength (Ib) ASTM D-4632 (warp/fill) 90 120 160 205 250
Elongation (%) MinimumASTM D-4632 50 50 50 50 50
Trapezoid Tear (Ib)ASTM D-4533 40 50 60 80 100
Mullen Burst (psi)ASTM D-3786 185 230 280 350 460
Puncture Strength (Ib)ASTM D-4833 55 65 85 110 150
Permittivity (1/sec)ASTM D-4491 2.0 1.50 1.30 1.40 1.20
Water Flow Rate (g/m/sf)ASTM D-4491 150 120 110 90 80
AOS (U.S. Std. Sieve)ASTM D-4751 50 70 70 80 100
UV Resistance (% at 500 hr)ASTM D-4355 70 70 70 70 70
Item # Code Width (ft) Length (ft) Area(yd2)
ApproximateWeight (Ib) Stock*
FX35HS-15R GEO 15 360 600 170 Y
FX45HS-15R GEO 15 360 600 195 Y
FX60HS-15R GEO 15 300 500 225 Y
FX80HS-15R GEO 15 300 600 280 Y
FX100HS GEO — — — — A
Landscape FabricPolypropylene ground cover fabric controls weed growth and soil erosion.
Item # Code Description Stock*
NS4-3X360 GEO 3' x 360' 4 oz. roll Y
NS4-4X360 GEO 4' x 360' 4 oz. roll Y
Form Stake - Wood
Item # Code Description Stock*
STAKE-1X1 MQB 1" x 1" x 48" Grade Stake Y
*Y = stock item; A = readily available by order
Call us for
complete specifications
and prices.
Call us for
complete specifications
and prices.
2www.MQB.com
Site Works Catalog
Sedimat™A patented, in-stream sedimentation control device. Effectively used in utility installation, culvert replacements, ditch maintenance and bridge work.• Excellent first flush protection• Prevents silt damage to stream
beds during construction• Protects oxygenated gravel• Easy to install• 100% biodegradable
Jute Mesh and StaplesAll-natural, erosion control fabric.
• 100% biodegradable• Meets all state and federal specifications• Prevents erosion on steep slopes and critical landscape areas• 1" openings act as tiny check dams
Sand BagFor general construction, coffer dams,landfills and flood control.• Available in high UV
polypropylene or burlap bags
Turbidity CurtainTurbidity curtain is an in-the-watersilt fence designed to prevent theflow and/or washing of disturbeddebris in a water source causedby construction. The curtain is designed and manufactured tomeet specifications determined bywater flow rate, depth of channelto be crossed or controlled, desired filtering properties ofgeotextile curtain, tide action andlength of time curtain is to be utilized. A variety of fabrics areavailable to meet environmental goals.
• Standard 50' length with 8' grommetted flotation chamber
• Available in any size
Silt FencePre-assembled silt control fence.• Regular and mesh-backed styles• Quality pointed hardwood staked• UV-stabilized fabric• Spec fence for state and federal projects
Item # Code Description Size Stock*
SF IVI 11-Stake Standard Silt Fence 36" x 100' Y
SFDOT IVI 17-Stake NYSDOT Silt Fence 36" x 100' Y
SFDOTMESH-17 IVI 17-Stake NYSDOT 3611MC Silt Fence 36" x 100' Y
SFWIRE-17 IVI 17-Stake NYSDOT Wire Silt Fence 36" x 100' Y
Item # Code Size Stock*
— IVI 4' x 10' mat A
Erosion Control
Item # Code Description Size Stock*
JUTE.MESH IVI Jute Mesh 4' x 225' (100 sq. yd.) Roll Y
JUTE.STAPLE IVI Staples - 11 gauge 6" x 1" - 1,000/Box Y
Item # Code Description Size Stock*
POLYBAG IVI Polypropylene Sand Bag 14" x 26" Y
BURLAP.BAG IVI Burlap Sand Bag 17" x 27" Y
Cubic Yard BagCubic Yard Bags are an effective solution when used as cofferdams during shoreline construction projects.
• Produced from virgin resins• Perimeter reinforcement
bands and corner loops for lifting
• Fabric weight: 6 oz. persquare yard
• Rated at 3,000 lb.
Item # Code Description Size Stock*
BULKBAG IVI Cubic Yard Bag 35" x 35" x 45" Y Item # Code Size Stock*
— IVI Call for information A
3
Site Works Catalog
Burlap/BurleneFor concrete curing, drags and covers.• Conforms to all state and federal specifications
Item # Code Description Size Stock*
BURLAP-4X300 IVI 10 oz. Burlap roll 48" x 300' Y
BURLAP-5X300 IVI 10 oz. Burlap roll 60" x 300' Y
BURLENE-10X100 IVI Burlene (poly-coated burlap) 10' x 100' Y
BURLENE-20X100 IVI Burlene (poly-coated burlap) 20' x 100' Y
Erosion ControlECS-1 Straw Single Net BlanketECS-2 Straw Double Net Blanket
Ideal for erosion protection and the establishment of vegetationfor up to 12 months. The ECS-1 is an erosion control blanketdesigned for low maintenance areas such as subtle grades,swales, road side slopes and on slopes ranging from 4:1 to 3:1.The ECS-2 is an erosion control blanket designed for moderateflow drainage channels and on slopes ranging from 3:1 to 2:1.The double netting ensures more efficient erosion protection andplant growth than the single layer of netting. The ECS-1 andECS-2 blankets are made from 100% agricultural straw. ECS-1 isstitched with degradable thread to a single layer ofphotodegradable polypropylene netting. ECS-2 is stitched withdegradable thread between two layers of degradablepolypropylene netting.• Permissible Sheer Stress: ECS-1 – 1.55 lb/ft2; ECS-2 – 2.1 lbs/ft2
• ECS-1 Style Comparative: North American Green S75™, Excelsior SR-1™, Landlok® S-1
• ECS-2 Style Comparative: North American Green S150™,Excelsior SS-2™, Landlok® S-2
• Accelerated degradable netting available
Item # Code Description Size Stock*
ECS-1 IVI Single Net Straw Blanket 8" x 112.5" Y
ECS-2 IVI Double Net Straw Blanket — A
AEC Premier Straw/Coconut BlanketAEC (American Excelsior Company) Premier Straw/Coconut blanketsare degradable erosion control blankets consisting of the finestcertified weed seed-free, agricultural straw fibers and thehighest quality strands of coconut fiber. The blend of 30%coconut fibers and 70% strawfibers extends the degradable lifeup to 24 months, depending on the jobsite.Applications• Utility transmission right-of-way• Slope stabilization• Highway and landfill construction• Urban drainage• Stream banks and waterways
Item # Code Description Size Stock*
AEC-PSC IVI Straw/Coconut Blanket 8" x 112.5" Y
Filter BagFilter (Dewatering) Bags are used for collecting silt and debrisfrom water being pumped from ditches, runoff collection ponds and drilling, before it is allowed to leave a construction site. Nonwoven and woven geotextiles are used to manufacture the bags, which range in size from 3' x 3' to 15' x 15' (standard sizes),and heavy-duty tubes up to 45' circumferenceand in lengths 50' and 75' used in dredging applications.
Item # Code Description Size Stock
FILTERBAG- IVI 10 oz. Filter Bag 15' x Y
FILTERBAG-6X6 IVI 8 oz. Filter Bag 6' x 6' Y
Concrete Curing
BubbleBlanket
Item # Code Description Size Approximate R value Stock*
CB6X25-12 POL 2-LayerBubble Blanket 6' x 25' 3 Y
CB8X125 POL Single Layer Bub-ble Blanket 8' x 125' 1.1 on ground
1.75 on concrete Y
2-layerBlanket
Single LayerBlanket
ULTRACureNCF™Single Use Wet Curing BlanketThe patented UltraCureNCF (NaturalCellulose Fabric) curing blanket provides thorough hydration, less discoloration and a more evenly curedslab when compared to other wet curing methods. Unlike other blankets,which tend to dry out after three or fourdays, UltraCureNCF (Natural CelluloseFabric) provides constant hydrationand maintains a 100% relative humiditycondition on a slab for the requiredseven-day curing period.
Item # Code Size Stock*
ULTRACURENCF CUR 8' x 200' Y
4www.MQB.com
Site Works Catalog
*Y = stock item; A = readily available by order
Drainage
Pre-Sloped Radius Channel
Standard PolyDrain channels have a built-in 0.6% slope with a smooth radius bottom and a narrow cross section. These features provide excellent hydraulic efficiency and,when hydraulically loaded, can achieveflow velocities of 3.5 feet per second.
• Anchoring ribs• Interlocking joints• PolyLock™ inserts
400 Series GratePerforated Heel-Proof Grate
• Special coatings available on all grates• Meets Americans with Disabilities Act (ADA) requirements
Slotted Steel Grate• Special coatings available on all grates
PolyDrain® TrenchDrain System
500 Series GrateSlotted Grate• Meets or exceeds all AASHTO
grate load standards• Ductile iron grates and frames
available with galvanized coating• Ductile and cast grates have
compatible anchor frames
510AF Fabrication/End Frame
• Ductile iron grates and frames available with galvanized coating
• Ductile and cast grates have compatible anchor frames
ABT420
502
Item # Code LoadClass Material Length
m (in)Weight kg (lb)
LockingDevice Stock*
ABT420 ABT A-B Galvanized Steel 1.0 (39.19) 2.7 (6) 811A Y
Item # Code Load Class Material Length m (in)
Weight kg (lb)
LockingDevice Stock*
ABT502 ABT A-B-C-D Ductile Iron 0.5 (19.60) 3.6 (8) 811B Y
Item # Code Load Class Material Length m (in)
Weight kg (lb)
LockingDevice Stock*
510AF ABT N/A Ductile Iron 0.5 (19.60) 4.1 (9) N/A Y
PolyLok™ Trench
Drain & Catch BasinEngineered to deliver the most
flexibility in a heavy-duty design
The Trench Drain system is engineered to deliver the most flexibility in a heavy-duty design. The Polylok Heavy-Duty Trench Drain is H-20 wheel load rated whencast in reinforced concrete. It offers a modulardesign with interlocking components toenable quick and easy connections. Eachsegment is 4' in length and comes with a reversible ADA compliant grate that can either be flat or allow for a ³/16" convex surface.
4' Trench Drain w/Grate
• Grates are ADA compliant• Grates are reversible from a flat side to a ³/16" convex side• Trench drain & grate can be cut down to 12", 24" or 36"• Lock tab feature for proper alignment and stability• Two #8 screws are used to interlock ends together• All outlet ports accept 3" SCHD 40 pipe, 4" SDR
35 pipe and 4" SCHD 40 pipe• Outside holes accept #4 rebar for fast positioning• 2x4s can be easily fastened to the base to provide a wider
footing• Grate is fastened to trench drain base with provided
#8 x 1¼" screws• H-20 wheel load rating when cast in reinforced concrete
12" x 12" Catch Basin• Comes complete with a black grate
and two seals that accept 2", 3", 4"or 6" pipe, including corrugated
• Precut with two inlet/outlet holes• Designed to withstand normal
abuse in landscaping applications
Item # Code Description Color Stock*
PL-90860 PYL 4' Trench Drain w/ Grate Black Y
PDB-12KIT PYL 12" x 12" Catch Bain w/ Grate Black Y
PL-90860-CE PYL Drain End Cap Black Y
PL-90860-OE PYL Drain Outlet Black Y
PL-90860-CEPL-90860-0E
For complete custom
signage call The Sign Shop at
(315) 788-2612
For complete customsignage call The Sign Shop at
(315) 788-2612
5
510AF
ABT410
Item # Code LoadClass Material Length
m (in)Weight kg (lb)
LockingDevice Stock*
ABT410 ABT A Galvanized Steel 1.0 (39.19) 2.7 (6) 810A Y
Site Works Catalog
PL-90860
PDB-12KIT
PolyDrain Catch Basins
610-611 Large Catch BasinsPolyDrain’s 610 and 611 Large Catch Basins are designed toaccept large volumes of fluids. Removable galvanized steel trashbuckets are available and a cast iron grate and frame is included.
900 Series Small Catch BasinsPolyDrain’s 900 Series Catch Basins have the same outside dimensions as standard PolyDrain channels. Designed to acceptsidewall extensions, they can be positioned any place in achannel run. They are available with easy-to-remove galvanizedsteel trash buckets and can accept the full range of lockage inlayor frame-and-grate systems.
PolyDrain Accessories
Inlets and OutletsAll 100 mm (4") horizontalplates have inlet or outlet capability. As outlets, they fitthe downstream end of everyfifth channel, or as inlets, theupstream end of the following channel. Verticaloutlet plates fit over thecutouts on each of the outletchannels.
Locking DevicesGrate locking devices are recommended for all applications involving vehicular traffic, or where vandalism may be a problem.Locking devices are providedin zinc-plated and stainlesssteel.
PolyClip™Installation AidsPolyClip was developed tospeed channel installation andmake the joining of the channels more secure beforethe pour. PolyClip consists oftwo special securing brackets—a “no-float” U-shaped leg that serves tomaintain proper height andkeep channels from floatingduring the pour and a securing bolt to keep the entire appliance attached tothe channel.
900 Series611
600 SeriesTrash Bucket
900 SeriesTrash Bucket
610
Drainage
6www.MQB.com
Site Works Catalog
Z886 System Profile
Z886 System Highlights
Integral Rebar ClipsMechanical
OverlapConnection
Optional HDFrame Assembly
90˚ Fabrication
Tee Fabrication
4" Throat / 6" Overall Width
Installation Specification
CG Grate
GrateLockdownHardware
Closed EndCap (E1)
End Outlet(2", 3", 4", 6" NH)
Bottom Outlet(2", 3", 4", 6" NH)
Z817 Flo-Thru Catch Basin
24"x24" Catch Basin withZ806 Connecting Trench
6" x 20" Catch BasinThe 6" x 20" basin is meant to be used as an in-linesump for applications where, from the top surface, thevisual appearance is of continuous 6" wide Z806 trenching. Simply trace and cut the trench section to beconnected into the end of the basin, insert into thebasin, bolt together and caulk around the exterior.
12" x 24" and 24" x 24" Catch BasinThe larger catch basins, 12" x 24" x 24" and 24" x 24" x 24",provide greater sump capacities for larger trench runs. Thesecatch basins can be used with Z806 and Z812. These basinshave an external trench adapter supplied to make the transitionbetween the trench and basin. This adapter, along with thehardware, is supplied by Zurn to make a fast and easy connection to any basin. Additional adapters can be used tomake numerous connections of trench into the catch basin.
6"x20" Catch Basin withZ806 Connecting Trench
Slab Thickness
6¼"4"
4"
3.5" (88.9 mm)
120' (39.62 m)
12.5" (317.5 mm)
DrainageZ886 Perma-Trench High Density Polyethylene (HDPE) 6" Drain SystemFeatures and Benefits • 80" modular channel sections with 20" grates• .75% built-in slope—handles greater flows, uniform slope• Radiused bottom—better flow rate, less solids build-up• Smooth, HDPE structural composite interior—0% water absorption• Durable and lightweight—strong corrosion-resistant material• Extra long runs—sidewall extensions allow pre-slope runs longer than 120'• Variety of gratings
Installation Specification
7
Site Works Catalog
Interior/Exterior Lasers
Dual Grade Laser for Level, Gradeand Vertical Alignment• 2-way, full-function remote control to make grade changes
from anywhere on the jobsitefor reduced setup time andfaster operation
• Fast, easy horizontal level,grade and vertical plumb setupwith no manual leveling
• Accuracy: ¹/16" @ 100'• Range: 2,600'• Grade range: -10 to +15% dual
axis• Self-leveling range: ±5°• Includes: HL700 receiver, rod clamp w/bubble vial, RC402
remote, (4) D NiMH batteries, charger, carrying case
Single Grade Laser for Level, Gradeand Vertical Alignment• 2-way, full-function remote control to
make grade changes from anywhere on the jobsite for reducedsetup time and faster operation
• Fast, easy horizontal level, grade and vertical plumb setup with no manual leveling
• Accuracy: ¹/16" @ 100'• Range: 2,000'• Grade range: -10 to +15%• Self-leveling range: ±5° single axis• Includes: HL700 receiver, rod clamp
w/bubble vial, RC402 remote, (4) DNiMH batteries, charger, carrying case
Item # Code Description Stock*
GL412 SPE Single Grade Laser Y
GL422 SPE Dual Grade Laser Y
Exterior Grade LaserUniversal Laser Provides Fast, Easy Horizontal Level,Grade and Vertical Plumb Setup• Electronic Leveling Vibration Filter dampens vibrations• Dual Automatic Axis Alignment to two desired alignment
points without positioning the receivers 90° perpendicular(±40°alignment range on Y- and X-axis)
• Spot Search uses the Spot Finder SF601 to find the center ofthe plumb beam manually
• Mask mode eliminates interference with othercrews on the job site
• Accuracy: ¹/16" @ 100'• Range: 2,600'• Different rotation speeds plus
Scanning Mode• Grade range: -25 to +25%• Self-leveling range: ±14° single axis• Includes: HL750 receiver, SF601 spot
finder, rod clamp w/bubble vial,RC603 remote, (4) D NiMHbatteries, charger, carrying case
Item # Code Description Stock*
UL633-14 SPE Universal Construction Laser Y
Machine Control Receivers
Magnetic Mount• Designed for quick installation on excavators
and backhoes without welding to the machine• Mount works with all Bullseye models• Two heavy-duty magnet banks provide 900
pounds of force• The Bullseye attaches to the mount using its
standard clamps, which allows a largeadjustment range on the magnetic mount pole
• Designed to also accept the plumb sensor
Bullseye™ 6 ReceiverAutomatically corrects the grade display for the angle of thedipper arm – extended or retracted up to 30° – allowing the operator to quickly check grade in multiple locations withoutmoving the machine.• Reception range: 2,000 ft./360°; vertical reception: 8.50"• Green on-grade: yes• Remote display: on-grade deadbands - 4 cut-fill/4
excavate fine - 0.4"/0.5" (10/1)standard - 0.8"/1.0" (20/25mm)
• Plumb swing range: standard ± 2.5º; wide ±10° to ±30°• Autoshut-off: 75 minutes; low battery indicator• Waterproof• Power: ATI991320-02 - (4) C;
ATI991321-02 - (4) NiMH
Item # Code Description Stock*
ATI991326-02 APA Bullseye™ 6 Receiver w/RechargeableBattery Pack & Magnetic Mount Y
ATI991320-02 APA Bullseye™ 6 Receiver A
ATI991360-02 APA Magnetic Mount A
8www.MQB.com
Site Works Catalog
*Y = stock item; A = readily available by order
GL412
GL422
UL633
Gammon Reels®
An aid to set up and deploy a clean, accurateplumb. Slip the reel into your palm, draw thebob to desired position and stop with fingerpressure. Steel clock spring zips the stringback into case.
Brass Plumb Bobs
20X EconoLine Level Kit
• ¼" accuracy @ 100'• Working range 200'• Fast setup and simple to use• Designed strictly for leveling, no circles
or vertical arcs• Kit includes: #60ALQC21 tripod,
#06-808C rod, carrying case and manual
20X Speed Line Level &Transit Level
• ¼" accuracy @ 100'• Working range 200'• Have clamps and tangents
that bring your instrument quickly on target
• Designed for builderswho require rough angleturning and fine tuningadjustments
• Includes: level or transit level,#60ALQC21 tripod, #06-808C rod, carrying case and manual
Transit Level
Levels/Transit Levels
Reels & Plumb Bobs
Item # Code Description Stock*
54190K CST 20x Speed Line Level Kit Y
54200K CST 20x Transit Level Kit Y
Item # Code Description Stock*
54135K CST 20x Econoline Level Kit Y
Item # Code Description Stock*
11-497 CST 6 oz. (170g) A
11498 CST 8 oz. (225g) Y
11499 CST 10 oz. (285g) Y
11550 CST 12 oz. (340g) Y
11551 CST 14 oz. (400g) Y
11552 CST 16 oz. (455g) Y
11-553 CST 18 oz. (510g) A
11-554 CST 24 oz. (680g) A
11-554A CST 32 oz. (910g) A
1155B CST Extra point only Y
Item # Code Description Stock*
GRHD CST 12'/3.6 m Gammon Reel® Y
Magnetic Locators
Magna-Trak®
Magnetic Locators
CST/Berger offers a complete line of locators,all featuring an LCD visual display and/oraudio tone; a lightweight, easy-grip design;easy access battery compartment; water resistant cases; and “High-Tech” magnetictoroidal sensors and unique electronic balancing circuitry.
LR50 Receiver
• Built-in blade-tilt and plumb indicators• Up to six channels of grade
information plus directionalout-of-beam indicators
• Reception: 360° Beam; 6.75" Vertical• Center On-Grade accuracy: 0.2"
Fine / 0.4" Standard / 0.8" Wide• Offset On-Grade accuracy
0.5" Fine / 1.0" Standard / 2.0" Wide• Plumb Swing & Blade-Tilt accuracy: ±
.5º; ±1.5°, ±2.5°• Includes NiMH batteries
Item # Code Description Stock*
LR50 SPE LR50 Laser Display Receiver Y
Speed Line Level
Please call for technicalinformation and pricing on
all magnetic locators.
Please call for technicalinformation and pricing on
all magnetic locators.
9
Site Works Catalog
Machine Control Receivers
Stand-On Power Buggy
Features• Frame constructed of solid 2" steel plate• Foam-filled tires• Side-to-side and rear-to-front forklift pockets• Isolated steering column• Hydraulic dump with foot-operated controls• Easy-squeeze speed control lever• Enclosed ventilated engine shroud• Heavy-duty poly dump bucket
Item # CodeOperating
Weightlb. (kg)
Plate Size W x L
in. (cm)
CentrifugalForce
lb. (kN)
ExciterSpeedVPM
TravelSpeedft./min.
(m/min.)
CompactionDepth
in. (cm)
CompactionArea
sq. ft./hr.(sqm/hr.)
Engine Stock*
AP2000Hfor asphalt
MBW
168 (76)no water193 (88)w/water
20 x 22(51 x 56)
2,475(11) 4,400 90
(27.4) 12 (31) 8,550(794) Honda GX160 Y
GP2000H MBW 165 (75) 20 x 22 (51 x 56) 3,250 (14.5) 5,050 120 (36.6) 14 (36) 10,800 (1,000) Honda GX160 Y
GP12 MBW 129 (59) 13 x 22.5 (33 x 57) 1,920 (8.5) 5,240 75 (23) 10 (25) 4,875 (453) Honda GX120 Y
GP3000-15H MBW 202 (92) 16 x 20 (41 x 51) 3,550 (15.8) 4,400 120 (36.6) 16 (41) 9,600 (890) Honda GX160 A
GP3550H MBW 226 (103) 21 x 22 (53 x 56) 3,550 (15.8) 4,400 110 (34) 18 (47) 11,000 (1022) Honda GX160 Y
GP5800H MBW 288 (131) 23 x 24 (58 x 61) 5,800 (25.8) 4,700 130 (39.6) 20 (51) 14,950 (1450) Honda GX270 A
GP7000H MBW 653 (296) 26 x 30 (66 x 76) 7,900 (35.1) 2,800 100 (30) 30 (76) 13,000 (1210) Honda GX390 A
AP2000H GP7000GP3550H
Vibratory Plate TampersMBW’s advancements in vibratory plate designs have doubled productivity, dramatically reduced maintenanceand extended product life. Each model offers a unique combinaton of frequency, centrifugal force, amplitudeand mass to provide the best possible results in terms of productivity and product life.
Construction Equipment
GP12
Features• Unsurpassed
exciter quality including heavy-duty housings, precision groundductile eccentricshafts, oversizedbearings, oil mistlubrication systemand customlubricants to withstand high operatingtemperatures
• Stress relievedsteel tampingplates are crack resistant
• Applicationmatched qualityshock mounts
Specifications• Payload: 2,500 lb.• Lift cylinder: 2" diameter• Bucket size: 16 cu. ft.• Top speed: 7 mph• 50" H x 97" L x 47" W; 1,300 lb.• Fuel capacity: 1.7 gal.• Engine: Honda GX390 recoil start• Wheel base: 40"
Rental StockItem is available for rent or for purchase from rental.
Item can also be purchased new by special order.
10www.MQB.com
Item # Code Description Stock*
058801-BUGGY ALL Power Buggy A
Site Works Catalog
*Y = stock item; A = readily available by order
Multiquip incorporates a unique hydraulic reversing mechanism, eliminating old-fashioned linkage adjustments. There are nocomplicated mechanical drive shafts or cables to create problems so service time and expense is greatly reduced.
Item # Code
Plate Size W x L
in. x in. (cm x cm)
Plate Size w/ Extensions
W† x Lin. x in. (cm x cm)
CentrifugalForce
lbs. (kg)
Exciter SpeedRPM
Max. Fwd. Speedft./min. (M/Min)
Max. AreaCapacity
ft2/hr. (M2/hr.)Engine HP Rating
BHP (kw)
OperatingWeight lb. (kg)
Stock*
MVH206GH MUL 20 x 27.6 (51 x70) NA 7870
(3500)35 5200 75 (23) 7,380 (690) Honda GX240Gas 7.1 (5.3) 459 (208) Y
MVH306GH MUL 18 x 34 (45 x 86)
24 x 34 (61 x 86)
10,125(4,592) 3,600 75 (23) 9,000 (736)
w/extensionsHonda GX270
Gas 8.0 (6.0) 706 (320)w/extensions Y
MVH502DSB MUL 22 x 35 (55 x 90)
28 x 35 (70 x 90)
14,000(6,350) 4,200 75 (23) 10,350 (961)
w/extensionsHatz 1D81S**
Diesel 14.3 (10.6) 1,122 (510)w/extensions A
†Extension plates are included to increase plate width to specified size. **Oil alarm is not available on diesel-powered models.
MVH306GH MVH502DSB
Reversible Plate Compactors
MVH206GH
Item # DPU6555 BPU3050A
Code WAC WAC
Operating Weightlb. (kg)
1,049.4 (476) 366 (166)
Plate Size W x Lin. (mm)
21.7 x 35.4(550 x 900)
28.9 x 19.7(733 x 500)
Centrifugal Forcelb. (kN)
14,612.6 (65) 6,750 (30)
Travel Speedft./min. (m/min.)
91.9 (28) 68.9 (21)
Compaction Depthin. (cm)
40 (101.6) 18 (45.72)
Compaction Areasq. ft./hr. (sqm/hr.)
12,541(1,193) 6,781 (630)
Engine
Hatz,air-cooled,
4-cycle, singlecylinder, diesel
Honda,air-cooled,
4-cycle, singlecylinder, gas
Stock* Y A
Reversible Plate TampersThese versatile reversible plates are ideal for compaction ofinterlocking paving stones, trenches, landscaping andmaintenance. Plates have a durable, integrated wheel set thatprovides for maximum built-in mobility. Single lever directioncontrol provides for easy operation.
Vibratory PlateTamper
Designed for compaction ofgranular soil in narrow trenches.These plates are ideal for curbs,gutters, around tanks, forms,columns, footings, guard railings,drainage ditches, gas and sewerworks and building construction.
Item # WP1550AW
Code WAC
Operating Weightlb. (kg)
190 (86)
Plate Size W x Lin. (mm)
19.5 x 23(500 x 585)
Centrifugal Forcelb. (kN)
3,375 (15)
Travel Speedft./min. (m/min.)
100 (30)
Compaction Depthin. (cm)
12 (30.48)
Compaction Areasq. ft./hr. (sqm/hr.)
9,750 (905)
Engine
Honda,air-cooled,
4-cycle, singlecylinder, gas
Stock* A
BPU3050A
DPU6555
WP1550AW
11
Site Works Catalog
Item # RS65
Code MMD
Stock* Y
Operating Weight 160 lb.
Impact Force 3,750 lbf
Frequency 640–680 vpm
Stroke 1.6-2.5"
Engine
Make/Model Honda GX100KPRF2
Horsepower 2.3
Fuel Tank Capacity 0.6 gal.
Dimensions
Plate W x L 11" x 13.4"
MTX60 Mikasa Rammer
• Self-cleaning drum and cyclone air filter reduce maintenance and increase service life
• Throttle controls engine speed, start/stop functions and fuel shut-off
• Digital tachometerand hour meter
• Anti-vibrationsystem decreasesvibration
Item # BS50-2 BS60-2I
Code WAC WAC
Stock* Y A
Operating Weight 129 lb. 145 lb.
Working Speed 26 ft./min. 32 ft./min.
Impact Blow 715 blows/min. 700 blows/min.
Stroke 1.7" 3.13"
Productivity 1,274 sq. ft./hr. 1,763 sq. ft./hr.
Engine
Make/Model Wacker Neuson WM80 Wacker Neuson WM80
Type 2 Cycle 2 Cycle
Horsepower 2.2 2.4
Starting System Recoil Recoil
Max. Operating RPM 4,400 4,400
Fuel Gas Gas
Fuel Tank Capacity 3.2 qt. 3.2 qt.
Fuel Consumption 1 qt./hr. 1.3 qt./hr.
Dimensions
Plate W x L 10" x 13.3" 11" x 13.3"
Overall L x W x H 26.5" x 13.5" x 37" 26.5" x 13.5" x 38"
Item # MTX60
Code MUL
Stock* A
Operating Weight 141 lb.
Impact Force 3,060 lbf
Working Speed 55.8 ft./min.
Impact Blow 695 blows/min
Amplitude (jumping 3.1"
Stroke 3.0"
Productivity 2,183 sq. ft./hr.
Engine
Make/Model Honda GX100
Type 4 Cycle
Horsepower 2.8
Starting System Recoil
Max. Operating RPM 4,100
Fuel Gas
Fuel Tank Capacity 2.1 qt.
Fuel Consumption 0.147 gal./hr.
Dimensions
Plate W x L 10.4" x 13.4"
Overall L x W x H 28.1" x 13.8" x 38.8"
BS50-2 & BS60-2IPowered by the exclusive WM80, the only 2-stroke enginespecifically designed and built for vibratory engines.Meets EPA and European air emissions.
• Purge bulb evacuates air from the fuel line• Three-stage air filtration system provides a virtually
dust-free engine• Integrated muffler wraps around the engine allowing for
closer compaction to structures and protectionto the muffler
RS65• Extremely light weight• Superior Shock Isolation System
lowers vibration level at operator handle• Height-adjustable handles• All-in-one fuel off lever and engine stop switch• Diaphragm carburation
*Y = stock item; A = readily available by order
12www.MQB.com
Site Works Catalog
BS60-21
BS50-2
RoadRunner® Outdoor Wheel• 5-digit, easy-read, magnified
counter (9,999 ft.) that subtracts in reverse
• Measures almost two miles without resetting• 12½" diameter, 3' circumference wheel• Heavy-duty, polycast wheel with clean
three-spoke design• Curved, telescoping handle adjusts to comfort level• Measures feet and inch units• 6-year warranty on wheels
Digital MeasuringWheelEasy, one-person operation—DigiRoller P lus IItakes fast, digital on-sitemeasurements.• Measures up to 999,999.9
feet/yards/meters• 99.9% measuring accuracy• Large, easy-to-read digital
readout/control panel• Control panel located near
handle (so you don’t haveto stoop over to read it)
• Display backlight (for use in darkly lit areas)• Handy Start/Stop Mode (prevents accidental measurements)• Built-in calculator for automatic, one-button measurement
of areas and volumes• Instant unit conversions (feet-inches, decimal-feet, inches,
yards, meters, and acres)• One-year warranty
Model 300• Folds to 22¼" and extends to 40¼"• Precision counter records up to
100,000 increments• Precision calibrated rubber 11¼"
diameter, 3' circumference wheel• Optional carrying case with pocket
and accessory stand kit available• Primary uses: construction,
fencing, landscaping, paved &dirt roads, irrigation
Model 415• Folds to 17" and extends to 45¾"• Precision counter records up to
100,000 increments• Steel disc 15½" diameter, 4'
circumference wheel• Optional carrying case with pocket• Primary uses: geological sites, heavy-
duty construction, engineering
Metal Professional Wheel• Rugged ¾" tubing is tough enough to handle
any terrain• Barrel clamp locks the handle upright,
releases in a second for storage• Durable ³/8" rubber wheel—11½"
diameter, 3' circumference • Sealed bearing on the wheel so dirt and
debris stay out• Folds to half its size• Superior counter protection and placement• Time-tested and proven counters—huge
numbers; ft. units• 6-year warranty on wheels
Item # Code Description Stock*
6425 CI DigiRoller Plus II Y
Item # Code Description Stock*
32-300RP ROL Feet Measurement Y
300M ROL Meters Measurement Y
Item # Code Description Stock*
400-ROL ROL Feet Measurement Y
400M ROL Meters Measurement A
Item # Code Description Stock*
415-ROL ROL Ft/In/10ths Measurement Y
Professional Series
Professional Series
Item # Code Description Stock*
MP301 KES MP301 Metal Wheel Y
Item # Code Description Stock*
RR318N KES RoadRunner Wheel Y
Item # Code Description Stock*
Z32-60400 ROL Replacement Counter Y
Measuring Wheels
Replacement Counter• Works with Rolatape 300/400 Series
measuring wheels
13
Professional Series
Model 400
• Folds to 29’ and extends to 45¾"• Precision counter records up to
100,000 increments• Spoked steel 15½" diameter, 4"
circumference wheel• Optional carrying case with pocket• Primary uses: heavy construction,
surveying, utlity installations
Site Works Catalog
Chalk & Chalk ReelsChalk
Item # Code Description Stock*
8B IRW 8 oz. Blue Chalk Y
8R-IRW IRW 8 oz. Red Chalk Y
8Y IRW 8 oz. Yellow Chalk A
8W IRW 8 oz. White Chalk A
8GLO IRW 8 oz. FluorescentOrange Chalk Y
5B IRW 5 lb. Blue Chalk Y
5R IRW 5 lb. Red Chalk Y
5W IRW 5 lb. White Chalk Y
5GLO IRW 5 lb. FluorescentOrange Chalk Y
Item # Code Description Stock*
64110 IRW Aluminum Chalk Reel Y
64310 IRW Speed-line Chalk Reel Y
64499 IRW Aluminum Reel (#64110) & 4 oz. Blue Chalk Y
64610 IRW Twisted Cotton Replacement Line–100' A
Speed-Line Chalk Reel• Retrieves chalk line 3½ times faster
than standard chalk reel• Crank handle clutch release allows
release of the line without spinningthe crank handle
• Lightweight ABS impact-resistantcase holds 2 oz. chalk and 100' line
64310
64110Aluminum Chalk Reel• Retractable self-locking metal
handle allows reel to be used as aplumb bob
• Heavy-duty aluminum alloy caseholds 2 oz. chalk and 100' line
Item # Code Description Stock*
47099 STA Die Cast Chalk Reel Y
47482L STA FatMax Xtreme Reel& 4 oz. Blue Chalk Y
Die Cast Chalk Reel• Long-wearing felt gasket hugs
line and distributes uniformchalk coating
• Can be used as plumb bob • Heavy-duty die cast case holds 100' line
47099
FatMax® Xtreme™ ChalkReel with Chalk• Rewinds 5x faster• Heavy-duty die cast case holds 100' line• Quick gear release prevents crank from
spinning when pulling line out• Patented ChalkView™ case allows you
to see amount of chalk inside• Premium polymer string
resists breakage
47482L
Giant® Chalk Line Reel• ABS housing with one-piece steel crank• Little Giant (#G100) model holds 100' thick string
and 15 oz. chalk• Giant (#G130) model holds 130' of thick string
and 27 oz. of chalk
Item # Code Description Stock*
G100 KES Little Giant Chalk Reel Y
G130 KES Giant Chalk Reel Y
RT SeriesModel RT104• Folds to 18" and extends to 36½”• Counter with reset switch reads to one
inch increments• Precision molded 4" diameter,
1' circumference wheel• Three section, aluminum telescopic handle
Item # Code Description Stock*
RT104 ROL Feet/Inches Measurement Y
14www.MQB.com
Site Works Catalog
*Y = stock item; A = readily available by order
Construction CalculatorsScale Master Pro
Digital Plan Measure for Engineers,Contractors, Landscapers, Pavers,Electricians or Anyone NeedingFast, Accurate Takeoffs FromBlueprints, Drawings and Maps• 72 built-in scales, six custom
scales and two built-inmemories
• Displays measurement infeet-inches, metric andother dimensional units
• Convert between scales anddimensions
• Subtract and counter feature
• Calculate linear, area andvolume takeoffs
Construction Master Pro
Advanced Construction-Math Calculatorfor Contractors, Estimators, Architects & EngineersWorks in and convertsbetween feet, feet-inch,fractions, decimal feet,yards, and full metric.Quick solutions for rightangles, rafters, roof,framing, drywall, studs,compound miter cuts,rake-walls, stairs,weight/volume, materialsconversions, circular solutions, and full dimensional conversions.
Ultra Measure Master
Metric Conversion Calculator forEngineers, Architects, Contractors,Scientists & StudentsMore than 60 standardand metric unitsbuilt-in for over 400conversioncombinations. Worksin and convertsbetween feet, inches,fractions, yards,meters, centimetersand millimeters,including square andcubic formats.Conversions for linear,area, volume, height,weight to volume, linear velocity, flow rates,pressure, temperature and more.
Item # Code Description Stock*
4065 CI Construction Master Pro Y
Item # Code Description Stock*
6025 CI Scale Master Pro Y
Item # Code Description Stock*
8025 CI Ultra Measure Master Y
Round Point Digging Shovel
45520 45519 43201 45106 43516 40191 43106
Item # Code Description Stock*
45520 UFH Open back. #2 size. 91⁄2" x 12" industrial gauge blade. FTS. 2 rivet. 11" tab socket. 48" ash handle. Y
45519 UFH Open back. #2 size. 91⁄2" x 12" industrial gauge blade. RS. 2 rivet. 11" tab socket. 48" ash handle. A
43201 UFH Open back. #2 size. 91⁄2" x 12" industrial gauge blade. RS. 2 rivet. 11" tab socket. 30" ash handle w/steel and wood D-grip. Y
45106 UFH Open back. #2 size. 9" x 111⁄2" heavy-duty blade w/Dura-Torque® crimp collar. FTS. 9" socket. 48" ash handle. A
43516 UFH Open back. #2 size. 9" x 111⁄2" heavy-duty blade w/Dura-Torque® crimp collar. FTS. 28" ash handle w/steel and wood D-grip. A
40191 UFH Open back. #2 size. 91⁄4" x 111⁄2" utility blade. RS. 9" socket. 48" ash handle. Y
43106 UFH Open back. #2 size. 91⁄4" x 111⁄2" utility blade. RS. 9" socket. 28" ash handle w/poly D-grip. Y
SFGLR JAC Open back. #2 size. 9" x 51⁄4" utility blade. 48" fiberglass handle. Y
Step Type: NS = No StepFTS = Forward Turned Step
Shovels
SFGLR
15
Site Works Catalog
*Y = stock item; A = readily available by order
Site Works Catalog
16
www.MQB.comUTICA
(315) 724-7119
SYRACUSE
(315) 671-4400
WATERTOWN
(315) 788-2612
Depend on McQuade & Bannigan• We have the quality products you need to get the job done right• Our expert sales staff offers product support and technical advice
• Customer satisfaction is always guaranteed• You can count on our service department for expert repairs
• For hard-to-find items, weʼll get it for you―quotes are available •We rent many of the items we sell―give us a call
Sales • Service • Rentalswww.MQB.com
UTICA
(315) 724-7119
SYRACUSE
(315) 671-4400
WATERTOWN
(315) 788-2612
UTICA
(315) 724-7119
SYRACUSE
(315) 671-4400
WATERTOWN
(315) 788-2612