SIR-ALP10T - Amazon S3 · jazz, hot latin, reggae, rock and many more. Best of all, it’s all...

Installation Guide

SIR-ALP10TALPINE COMPATIBLE

SIRIUS SATELLITE RADIO PLUS TRAFFIC TUNER

2 SIR-ALP10T Installation Guide

Congratulations on your purchase of the SIR-ALP10T, theAlpine Compatible SIRIUS Satellite Radio Plus Traffic Tuner!

Your new SIRIUS Radio Plus Traffic Tuner is designed to work with compatible Alpinesatellite radio ready headunits and traffic ready navigation systems. Contact Alpine orSIRIUS for model compatibility.

What is SIRIUS Satellite Radio?Over 120 channels of the bestentertainment and completelycommercial-free music for your car,home or office.

Only SIRIUS has more than 65 originalmusic channels, from today’s hits to R&Boldies to classical masterpieces. Fromauthentic country and real bluegrass to cooljazz, hot latin, reggae, rock and many more.Best of all, it’s all completely commercial-free.

SIRIUS also has more than 55 channels ofworld-class sports, news andentertainment. Included as part of yoursubscription, you get up to 16 NFL games aweek, up to 40 NBA games a week and upto 40 NHL games a week. (Games arebroadcast during their respective seasons.)Coupled with great sports news fromESPN, the SIRIUS sports offering isunrivaled. And don’t forget a host of othergreat news and entertainment, like NPR,CNBC, Fox News, Radio Disney and E!Entertainment Radio. For more information,visit www.sirius.com.

What is SIRIUS Traffic?Navigational traffic information for 22major metropolitan areas* in thecontinental US.

SIRIUS Traffic conveys navigational trafficinformation for visual display on acompatible navigation system.

Using a navigation system (such as theAlpine NVE-N872A), traffic data fromSIRIUS is displayed either superimposed ona navigation map, or in a list type formatdisplayed on the navigation screen. Thedata provides traffic speed and flowinformation as well as scheduled andunscheduled incidents, alerting you tocongestion, accidents, road construction,detours, and other traffic related informationas you drive. The navigation system’s touchand voice recognition controls can provideeasy access to detailed information. TheSIRIUS Traffic data is updated frequentlyenabling you to be up-to-date regardingtraffic situations. Based on the informationfrom SIRIUS Traffic, the navigation systemcan then plan alternate routes before youget caught in traffic, and if you make awrong turn, the system can recalculate yourroute and get you back on track in seconds.

* Metropolitan areas for which the SIRIUS Traffic service is available as of November 2005are: Atlanta, Baltimore, Boston, Chicago, Dallas /Ft. Worth, Detroit, Houston, Los Angeles,Miami/Ft. Lauderdale, Minneapolis/St. Paul, New York City, Orlando, Philadelphia, Phoenix,Pittsburgh, San Francisco/Oakland, San Diego, San Jose, Seattle, St. Louis, Tampa, andWashington, DC. Additional cities are expected to be added as they become available.

3SIR-ALP10T Operation and Installation Guide 3SIR-ALP10T Installation Guide

Table of ContentsPackage Contents ............................................................................................................... 3Warnings and Cautions ........................................................................................................ 4Installation ............................................................................................................................ 6Mounting the SIR-ALP10T Tuner .......................................................................................... 6Installing the Antenna ........................................................................................................... 6Optimum Antenna Mounting Locations ................................................................................. 7Wiring and Cable Connections ............................................................................................. 8System Connection Examples ........................................................................................... 10Activating Your SIRIUS Subscriptions ................................................................................. 15Traffic Information Setup .................................................................................................... 17Basic Operation ................................................................................................................. 19Audio Headunit Messages .................................................................................................. 21Navigation System Messages ............................................................................................ 21Specifications .................................................................................................................... 2212 Month Limited Warranty ................................................................................................. 23

Package ContentsA

B

C

F

H

D

E

SIR-ALP10T Tuner

Magnetic Mini Antenna

Antenna Cable Cover/Tail

Alcohol Swab

Power Harness With In-Line Fuse

2.5-Meter Ai-NET Cable

3.5-Meter Data Cable

4 Mounting Screws

A

B

C

D

E

F

G

H

G

DATA


WARNINGThis symbol means importantinstructions. Failure to heed them canresult in serious injury or death.

DO NOT OPERATE ANY FUNCTIONTHAT TAKES YOUR ATTENTION AWAYFROM SAFELY DRIVING YOURVEHICLE.

Any function that requires your prolongedattention should only be performed aftercoming to a complete stop. Always stop thevehicle in a safe location before performingthese functions. Failure to do so may resultin an accident.

DO NOT OPEN, DISASSEMBLE ORALTER THE UNIT IN ANY WAY. Doing somay result in fire, electric shock or productdamage.

DO NOT INSERT ANY OBJECTS INTOTHE UNIT. Doing so may result in fire,electric shock or product damage.

USE THE CORRECT AMPERE RATINGWHEN REPLACING FUSE. Failure to doso may result in fire, electric shock orproduct damage.

MAKE THE CORRECT CONNECTIONS.Failure to make proper connections mayresult in fire or product damage.

DO NOT SPLICE INTO A ELECTRICALCABLES. Never cut away cable insulationto supply power to other equipment. Doingso will exceed the current carrying capacityof the wire and result in fire or electricshock.

DO NOT INSTALL IN LOCATIONS THATMIGHT HINDER VEHICLE OPERATION.Doing so may obstruct vision or hampermovement which can result in a seriousaccident.

DO NOT INSTALL THE UNIT TO HIGHLEVELS OF HUMIDITY, MOISTURE ORDUST. Doing so can result in electric shockor product failure.

FCC Warning: This equipment maygenerate or use radio frequency energy.Changes or modifications to this equipmentmay cause harmful interference unless themodifications are expressly approved in thisUser Guide. The user could lose theauthority to operate this equipment if anunauthorized change or modification ismade.

Note: This equipment has been tested andfound to comply with Part 15 of the FCCRules. These rules are designed to providereasonable protection against harmfulinterference. This equipment may causeharmful interference to radiocommunications if it is not installed andused in accordance with these instructions.However, there is no guarantee thatinterference will not occur in a particularinstallation. If this equipment does causeharmful interference to radio or televisionreception, which can be determined byturning the equipment off and on, the user isencouraged to try to correct the interferenceby one of more of the following measures:

• Relocate the receiving antenna.• Consult the dealer or an experienced

technician for help.


CAUTIONThis symbol means importantinstructions. Failure to heed them canresult in injury or material propertydamage.

HALT USE IMMEDIATELY IF A PROBLEMAPPEARS. Failure to do so may causepersonal injury or damage to the product.Return the unit to your authorized retailer ornearest service center for repairing.

INSTALL THE WIRING SO THAT IT IS NOTCRIMPED OR PINCHED BY SCREWS ORSHARP METAL EDGES. Route the cablesaway from moving parts or sharp pointededges. This will prevent crimping anddamage to the wiring. If the wiring mustpass through a metal hole, be sure to use arubber grommet to prevent the wire’sinsulation from being cut by the metal edge

of the hole.

USE THE SPECIFIED ACCESSORYPARTS AND INSTALL THE PRODUCTSECURELY. Be sure to use only thespecified accessory parts. Use of non-specified parts may damage this unitinternally or may not securely install the unitin place. This may cause parts to becomeloose, resulting in hazards or productfailure.

USE CAUTION IF YOU NEED TODISCONNECT THE BATTERY TERMINAL.Please consult the vehicle’s owner’smanual or a service technician prior toremoving the battery positive or groundconnection, as it may cause damage to thevehicle’s electrical system or requirereprogramming of the vehicle’s computer-controlled devices.


Installing the Antenna

The antenna includes a plastic cable cover/tail which covers the exposed antennacable and keeps it attached securely tovehicle roof. The tail also helps position theantenna the proper distance from the rearwindow, sunroof or rear hatch.

To attach the cover/tail:1. Once you have determined the proper

mounting location (see the nextsection), clean the area with thesupplied alcohol swab.

2. Connect the antenna cover/tail to theantenna cable, making sure that thestrain-relief on the antenna seats intothe cover/tail groove. Route the cablethrough the wire channel in the cover/tail.

3. Remove the protective tape from theadhesive and carefully position theantenna with cover/tail and applypressure to secure it to the vehicle.

Cable Cover/TailAntenna

Vehicle

CableCover/Tail

Antenna(Underside)

Adhesive Strips

Antenna Cable

InstallationIt is recommended that prior to starting theinstallation, you read completely thisinstallation manual and follow the guidelineslisted below:

Consider the mounting location carefully.You should make sure that you avoid thefollowing:

• Any location where the tuner isexposed to moisture.

• Any location where the tuner isexposed to extreme heat.

• Any location that would interfere withmoving parts on the vehicle or interferewith driving.

Mounting the SIR-ALP10T Tuner

Be sure that you find a location that is flatand has clearance above the tuner toprevent any damage, as well as allow forventilation.

Do not install the tuner under the carpet orin a small enclosed area without properventilation. Doing so can result in damageto the tuner or the vehicle. Use the suppliedscrews to securely fasten the unit.

Caution:If you are attaching the tuner directly to thevehicle’s chassis, be sure that you check tomake sure the area behind the tuner is freefrom moving parts, fuel or brake lines, wireharnesses or any other items which mayget damaged by drilling a mounting hole orfrom the screws.

DATA


Optimum Antenna Mounting Locations

The optimum location to mount the antennais on the roof of the vehicle. It is important toavoid any obstruction that will block thesatellite signal, such as a roof rack. Forconvertible vehicles, install the antenna onthe trunk lid as shown.

• Place the antenna on a metal surfaceof your vehicle at least 12" x 12", and atleast 6" from a window. (Use theantenna cover/tail as a guide for theproper distance from the rear window.)

• The antenna’s magnet will secure it tothe metal surface. The adhesive that isattached to the antenna cover/tail willsecure the cable to the vehicle. Beforerouting the antenna cable, confirm thatthe antenna is mounted in a suitablelocation.

• Route the cable from the antenna to thevehicle’s interior by tucking itunderneath the rubber molding aroundthe rear window, if possible.

• Route the cable from the lowest pointof the rear window into the trunk. Takeadvantage of any existing cablechannels or wiring conduits.

• For SUVs, minivans and five-doorvehicles, bring the cable into thevehicle under the rubber molding of thetailgate, and continue under the interiortrim.

• From the trunk, carefully route thecable to the location of theSIR-ALP10T and plug the SMBconnector into the tuner.

Caution:• Do not pull the wire across sharp

edges that could damage it.• Keep the wire away from areas where it

could become tangled in the driver’sand passenger’s feet.

• Keep the antenna wire away fromextreme heat, such as exhaust systems.

• Avoid placing the cable near anymoving parts.

Sedan/Coupe

SUV/Mini-Van

Truck

Convertible (only)


1

3

2

4

DATA

Wiring and Cable Connections

Antenna InputConnect the right-angle SMB connectorfrom the antenna. Push firmly to attach.

Ai-NET Output ConnectorUse the supplied Ai-NET cable to connectto the Alpine Headunit or Audio Processor –See “System Connection Examples” formore specific details.

Ai-NET Input ConnectorConnect to optional Alpine audio equipmentlike CD Changers - See “SystemConnection Examples” for more specificdetails.

Power Harness ConnectorAfter the wiring connections are complete,plug the wiring harness into the connector.Make sure to insert firmly to lock theconnector in place.

A

B C ED

Antenna Input (SMB)

Ai-NET Output Connector (BLACK)

Ai-NET Input Connector (GRAY)

DATA Connector (BLACK)

Power Connector

A

B

C

D

EBattery (+)2

1 ACC (Ignition Switched)

Ground (-)3

4

- Used in standalone navigation system applications (no audio headunit)

No Connection


DATA

Antenna (21’ cable)

Mount on Roof of Vehicle

Black (Pin 3) – Connect to Chassis Ground (–)

2.5-meter Ai-NET Cable(Connect to Alpine SAT ReadyHeadunit or Signal Processor)

Yellow (Pin 2) – Connect to Battery Positive (+)

Right-angle

SMB Connector

Note: It is important to follow the Input/Output configuration of the Ai-NET system. Thedirectionality is in reference to the Audio Path.Gray Ai-NET connectors are Audio InputDark Blue Ai-NET Connectors are Audio Output. (Exception is the connector on an AlpineHeadunit – it can be either Input or Output depending on the position of the Ai-NET switchon the bottom of the unit.

3.5-meter Data Cable(Connect to Alpine NVE-N872A)

IgnitionSwitchRed (Pin 1) – ACC, Connect to

Ignition Switched Circuit

Note: Connect the RED (ACC/IGN) wireONLY when using the SIR-ALP10Twithout an Alpine headunit.


System Connection ExamplesSystem 1: Alpine Navigation System and SIR-ALP10T

(FRONT VIEW)

(REAR VIEW)Alpine Navigation System (NVE-N872A)

DATA

EX-2DISPLAY

Alpine Monitor System

(TME-M770 or TME-M710)

Note: For this system configuration, be sure to connect the RED wire on the SIR-ALP10T to afused ACC or IGN line.


System 2: Alpine Headunit, Alpine Navigation System, and SIR-ALP10T

(REAR VIEW)

(FRONT VIEW)

Special Note

BOTTOM

COVER

Ai-NET

NORM EQ DIV

Ai-NET Switch Set to NORM~ Default Setting.

Alpine SAT Ready Headunit (Ai-NET CD Player or Mobile

Multimedia Station)

DATA

Alpine Navigation System (NVE-N872A)



Alpine Monitor Headunit

EX-2DISPLAY

Note: For this system configuration, DO NOT connect the RED (ACC/IGN) line on the SIR-ALP10T.


System Connection Examples (Continued)

System 3: Alpine Headunit, Alpine Navigation System,CD Changer or IPOD Interface, and SIR-ALP10T


(REAR VIEW)

(FRONT VIEW)

Special Note

BOTTOM

COVER

Ai-NET

NORM EQ DIV

Ai-NET Switch Set to NORM~ Default Setting.

Alpine SAT Ready Headunit (Ai-NET CD Player or Mobile

Multimedia Station)

Alpine CD Changer (CHA-S634) / Alpine iPOD interface (KCA-420i)

DATA




Alpine Monitor Headunit

EX-2DISPLAY


System 4: Alpine Multimedia Headunit, Alpine Navigation System,CD-Changer or IPOD Interface, and SIR-ALP10T


(REAR VIEW)

(FRONT VIEW)Bottom of Tuner Module

Alpine CD Changer (CHA-S634)/Alpine iPOD interface (KCA-420i)

DATA


Alpine Multimedia Station Headunit

EX-2DISPLAY

Ai-NET

NORM EQ DIV

Hideway Headunit Tuner Module

Ai-NET Switch Set to NORM ~ Defaut Setting

Special Note

(IVA-D300, IVA-D310, IVA-D901)


System 5: Alpine Multimedia Headunit, Alpine Navigation System,CD-Changer or IPOD Interface, Audio Processor, and SIR-ALP10T

System Connection Examples (Continued)

Alpine CD Changer (CHA-S634)/Alpine iPOD interface (KCA-420i)

DATA

Alpine Multimedia Station Headunit (IVA-D300, IVA-D310, IVA-D901)

EX-2DISPLAY

Hideway Headunit Tuner Module

Alpine Audio Processor

(PXA-H710, PXA-H700)

Headunit InputChanger Input

Bottom of Tuner Module

Ai-NET

NORM EQ DIV

Ai-NET Switch Set to EQ/DIV

Special Note

(REAR VIEW)

(FRONT VIEW)Alpine Navigation System (NVE-N872A)



You must activate the SIR-ALP10T beforeyou can start to receive the SIRIUS SatelliteRadio service and the SIRIUS Trafficservice. Each is a separate service, andeach needs to be activated individually.

In order to activate your radio and trafficsubscriptions, you will need the two SIRIUSIDs (SIDs) – one for the SIRIUS SatelliteRadio service and one for the SIRIUS Trafficservice – which uniquely identify your SIR-ALP10T tuner. The SIDs may be found onsticker located on the bottom of the SIR-ALP10T packaging or on the bottom of theunit itself.

The label will have printed on it two 12-digitSID numbers. The first will be the Data SIDfor the SIRIUS Traffic service, for example,“Data SID: 123456789012”. The second isthe Audio SID for the SIRIUS Radio service,for example, “Audio SID: 987654321098”.Note: It is possible to activate only theaudio or the traffic service, just use theappropriate SID. When you have locatedboth SIDs, write them down in the spaceprovided on page 22 of this manual.

Obtaining the Audio SID from theAlpine HeadunitIf you do not have access to the SIDstickers on the packaging or on the product,you can obtain the Audio SID using thefollowing method.1. Make sure that the SIR-ALP10T is

properly connected, and that theantenna is oriented to receive theSIRIUS satellite signal.

2. Press and release the POWER/SOURCE button on the audio headunitto select SIRIUS as the source. (Eachpress of the button will change to adifferent audio source.)

3. The display may read “UPDATING” or“CALL 888-539-SIRIUS TOSUBSCRIBE” until the SIR-ALP10T

channel update is completed.NOTE: Don’t push any buttons orperform any operations untilupdating has been completed. Onceupdated, and the SIRIUS channels arebeing received, the display will changeto Channel 184, the SIRIUS SatelliteRadio’s Preview Channel. At this timeyou should also be able to hear theaudio from the Preview Channel.

4. Use the UP/DN buttons to selectchannel “255” on the display.

5. Once tuned to channel 255, theheadunit will display “SIRIUS” in theCategory Name Field, “RADIO ID” in theChannel Field, and the Audio SID in theArtist and Song fields of the display.Note: You may have to press the TITLEbutton on the Alpine headunit to showthe Audio SID. Be sure that the headunitis set to Auto Scroll the text. If not, youmay only see the first eight charactersof the SID. (See your Alpine headunitowners manual for more information.)

6. Copy the Audio SID to the spaceprovided on page 22 of this manual.

Obtaining the Data SID from theAlpine NVE-N872A NavigationSystem1. Turn on the Alpine navigation system

and monitor/display.2. The navigation system will display a

disclaimer notice. Select I ACCEPT toproceed.

3. When the map screen is displayed,touch the menu icon in the upperright corner of the display screen.

Activating Your SIRIUS Subscriptions


4. When the Nav Menu screen isdisplayed, touch the Setup button, orselect it by tilting the joystick to highlightit and press the ENTER button.

5. When the Setup screen is displayed,touch the Traffic Information selection,or select it by tilting the joystick tohighlight it and press the ENTERbutton. Note: If the Traffic Informationselection is grayed out and cannot beselected, this indicates that the SIR-ALP10T is not connected, or connectedincorrectly. Check to be sure you havecorrectly installed the SIR-ALP10Taccording to the instructions in thismanual.

6. The next Setup screen will display theData SID near the bottom of the screenwhere it says Sirius ID. Copy the DataSID to the space provided on page 22of this manual.

Activating the SIRIUS Audio and/orData Services1. Be sure that your Alpine headunit and

Navigation systems are turned on andthat you have the SID informationavailable.

2. Call SIRIUS toll-free at 1-888-539-SIRIUS (1-888-539-7474) to activateyour subscriptions.

3. During the activation process, be sureto tell the operator that have a receiveron which you want to activate both aSIRIUS Radio service subscription anda SIRIUS Traffic service subscription.Provide the operator with both the AudioSID and the Data SID.

Once the subscription process iscompleted, your audio and/or navigationsystem is ready to use. Refer to the Alpineheadunit and/or navigation system ownersmanuals for operation instructions.

If you have subscribed to the SIRIUS Trafficservice, proceed to the next section tocontinue with the traffic information setup.


The traffic information setup controls theway the traffic and navigation information isdisplayed. To review and/or change theseparameters:1. Turn on the Alpine navigation system

and monitor/display.2. The navigation system will display a

disclaimer notice. Select I ACCEPT toproceed.

3. When the map screen is displayed,touch the menu icon in the upperright corner of the display screen.

4. When the Nav Menu screen isdisplayed, touch the Setup button, orselect it by tilting the joystick to highlightit and press the ENTER button.

5. When the Setup screen is displayed,touch the Traffic Information selection,or select it by tilting the joystick tohighlight it and press the ENTERbutton.

Traffic Information Setup

6. The next Setup screen will display thesystem status and the traffic setupparameters.

The following sub-sections explain each ofthe traffic information setup parameters.

System StatusSystem Status indicates the strength of theSIRIUS data signal being received:

(No Signal)

(Weak Signal)

(Strong Signal)

(Very Strong Signal)

Traffic IconsWhen the system receives traffic incidentinformation, you can choose whether todisplay the traffic incident information asicons on the map screen. Traffic incidenticons are displayed when the map scale isset between 1/32 mile (50 m) and 5 miles(10 km).


To change the Traffic Icon setting, touchTraffic Icons, or select it by tilting thejoystick to highlight your selection and pressthe ENTER button.

Show: The selected traffic incident iconsare displayed on the map screen. If Show isselected, you may also choose the types oftraffic incidents you want to be displayed.

Hide: No traffic incident icons are displayedon the map screen.

If Show is selected, to change the types oftraffic incident icons which are displayed:1. Touch Edit, or select it by tilting the

joystick to highlight it and press theENTER button.

2. From the list, select (or de-select) thetypes of traffic icons. Traffic incidenticon types with a checkmark next tothem will be displayed on the map.Touch the icon type, or select (or de-select) by tilting the joystick to highlightthe selection and press the ENTERbutton.

3. Selecting ALL will choose to display alltraffic incident icons.

4. When complete, touch Done, or selectit by tilting the joystick to highlight it andpress the ENTER button.

Selecting the Default button will choose todisplay all traffic incident icons.

Traffic Speed FlowWhen the system receives informationabout traffic flow (congestion), you canchoose whether to display the traffic flowinformation on the map screen.

Traffic flow information is displayed whenthe map scale is set between 1/32 mile (50m) and 5 miles (10 km).

To change the Traffic Speed Flow setting,touch Traffic Speed Flow, or select it bytilting the joystick to highlight your selectionand press the ENTER button.

Show: Traffic flow information is displayedon the map screen.

Hide: No traffic flow information is displayedon the map screen.

Traffic speed flow information is viewable onthe map only for those roads for which thisinformation is provided by the SIRIUS Trafficservice. Contact SIRIUS for updatedinformation on traffic flow coverage for yourarea.

Detour Based OnWhen you select Detour in the TrafficIncident List screen, or press the Detourbutton on the remote control, the systemwill allow you to detour your route based


upon the setting you have chosen, traffic ordistance.

To change the Detour Based On setting,

touch Detour Based On, or select it bytilting the joystick to highlight your selectionand press the ENTER button.

Traffic: The system will provide a detour byconsidering traffic congestion reportedalong the route within 30 miles ahead of thevehicle. This option should be chosen if youplan to use the detour feature to avoid trafficcongestion.

Distance: the system will provide a detourby considering the distance selected by theuser.

Basic Operation

The SIR-ALP10T SIRIUS Satellite RadioPlus Traffic Tuner is compatible with mostAlpine satellite ready headunits from 2001and up. The satellite traffic data iscompatible with the Alpine NVE-N872ANavigation System. Consult the Alpine orSIRIUS Customer Support Departments formore information about compatibility.

For information about operating your Alpineheadunit, consult the manual whichaccompanied the headunit.

The following sections describe the basicoperation of the NVE-872A NavigationSystem.

Traffic Incident ListIf you have subscribed to the SIRIUS trafficservice, you can display the Traffic IncidentList screen in order to confirm trafficinformation enroute to a destination, or onroads in the vicinity of the vehicle:1. When the map screen is displayed,

touch the menu icon in the upperright corner of the display screen.

2. When the Nav Menu screen isdisplayed, touch the Information button,or select it by tilting the joystick tohighlight it and press the ENTERbutton.


3. When the Info screen is displayed,touch the Traffic Incident List selection,or select it by tilting the joystick tohighlight it and press the ENTERbutton.

4. The Traffic Incident List screen isdisplayed and provides a list of trafficincident information in the vicinity of thevehicle.

There are several options available to youfrom this screen, which are described in thefollowing sections:Traffic Incident

Touching a specific traffic incident fromthe list (or selecting it by tilting thejoystick to highlight it and pressing theENTER button) will display detailsabout the traffic incident. Note that it ispossible for the detailed information tobe identical to the summaryinformation.

Crosshairs Icon

Touching the crosshairs icon next to atraffic incident entry (or selecting it by

tilting the joystick to highlight it andpressing the ENTER button) will displaya map of the area surrounding theselected traffic incident.

Detour ButtonTouching the Detour button, or tilting thejoystick to highlight the selection andpressing the ENTER button, will causethe system to analyze the traffic datawithin 30 miles of the vehicle’s position.If traffic congestion is found, a messageis displayed informing you of thedistance to the congestion and theanticipated delay if the congestion is notdetoured. Note that the Detour Basedon Traffic option (described previously)must be selected in the traffic setup forthis feature to work.

To begin calculating a detour, touchDetour, or select it by tilting the joystickto highlight it and press the ENTERbutton. To not plan a detour, touch the

button, or select it by tilting thejoystick to highlight it and press theENTER button.

Legend ButtonTouching the Legend button, or tiltingthe joystick to highlight the selectionand pressing the ENTER button,displays a list of the icons associatedwith each incident, and defines themeaning of each icon.


These messages vary by headunit model. Consult your Alpine headunit owners manual formore information.

LOADING - Indicates that the SIR-ALP10T is acquiring audio and/or program information.

UPDATING or CALL 1-888-CALL SIRIUS TO ACTIVATE - This message appears whenthe SIR-ALP10T is receiving a subscription update or during a channel or category update.

NO SIGNAL or NO SIGNAL or ACQUIRING - Will be displayed when there is a weak orno antenna signal present.

ANTENNA or ANTENNA ERROR - Will be displayed if the antenna is damaged ordisconnected.

Accident

Blockage

Construction / Roadworks

Danger

Debris

Disabled Vehicle

Information

Sports Event

Traffic Jam

Weather

LegendIcon

Viewing Traffic Speed and Flow IconInformationWhen you have set the system to displaytraffic speed and flow icons on the map

display (discussed previously), the iconsare displayed in several shapes and colorsto indicate traffic speed.

Red Square

Yellow Diamond

Green Dot

0-10 mph

10-45 mph

45+ mph

0-20 km/h

20-90 km/h

90+ km/h

SpeedIcon

Traffic incident icons and detailedinformation is available for all reportedincidents.

Audio Headunit Messages

Navigation System MessagesCHECK ANTENNA - The antenna is not connected to the SIR-ALP10T. Check the antennacable to be sure it is securely attached to the unit.

UPDATING CHANNELS - This message appears when the SIR-ALP10T is receivingchannel mapping updates.


SpecificationsOperational FrequenciesSatellite .............................................................................2322.293/2330.207 MHzTerrestrial .......................................................................................... 2326.250MHzPower Requirements ......................................................................... 8-16 Volts DCFuse Type .......................................................................................... 1-AMP (ATC)Chassis Size (without Mounting Tabs) ........................ 4-1/8” x 5” x 1-3/8” (WxHxD)

105mm x 126mm x 35mm (WxHxD)Chassis Size (with Mounting Tabs) ............................. 4-7/8” x 5” x 1-3/8” (WxHxD)

127mm x 126mm x 35mm (WxHxD)Antenna Type .................................................................................... Mini-MagneticAntenna Cable Length ........................................................ 21’ (single micro-cable)Connector Type ......................................................................... SMB (Right-angle)Audio Interface ............................................... 2 Ai-NET Connectors (Input/Output)Audio Output .................................................................................... 850mV (Fixed)Weight .................................................................................... 0.528 kg. (1.16 lbs.)Included Cables ........................................................ 2.5 Meter Ai-NET (Male/Male)

3.5 Meter Data Cable (Male/Male)Note: Design and specifications are subject to change without notice.

SIRIUS Radio Service SID:

SIRIUS Traffic Service SID:

SIRIUS Customer Service: 1-888-539-7474

Please write down your SIRIUS IDs in the space provided below:


12 MONTH LIMITED WARRANTYSirius Satellite Radio warrants to the original retail purchaser of this product that should thisproduct or any part thereof, under normal use and conditions, be proven defective in materialor workmanship within 12 months from the date of original purchase, such defect(s) will berepaired or replaced with new or reconditioned product (at the Company’s option) withoutcharge for parts and repair labor. To obtain repair or replacement within the terms of thisWarranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill ofsale), specification of defect(s), transportation prepaid, to the location shown below underWARRANTY RETURN.

This Warranty does not extend to the elimination of externally generated static or noise, tocorrection of antenna problems, to costs incurred for installation, removal or reinstallation ofthe product, or to damage to tapes, compact discs, speakers, accessories, or vehicle electricalsystems.

This Warranty does not apply to any product or part thereof which, in the opinion of the Company,has suffered or been damaged through alteration, improper installation, mishandling, misuse,neglect, accident, or by removal or defacement of the factory serial number/bar code label(s).THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TOTHE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THECOMPANY’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THEPRODUCT.

This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES,INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THEDURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANYWARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITYMUST BE BROUGHT WITHIN A PERIOD OF 48 MONTHS FROM DATE OF ORIGINALPURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIALOR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY,EXPRESS OR IMPLIED, WHATSOEVER. No person or representative is authorized to assumefor the Company any liability other than expressed herein in connection with the sale of thisproduct. Some states do not allow limitations on how long an implied warranty lasts or theexclusion or limitation of incidental or consequential damage so the above limitations orexclusions may not apply to you. This Warranty gives you specific legal rights and you mayalso have other rights which vary from state to state.

WARRANTY RETURN: To obtain repair or replacement within the terms of this Warranty,please return product to an authorized Directed Electronics Dealer or call (800) 869-5590; proofof purchase and description of defect are required. Products to be returned to an approvedwarranty station must be shipped freight prepaid.

SIR-ALP10T Warranty card (Sept. 2005)

© 2005 SIRIUS Satellite Radio Inc.

SIRIUS Satellite Radio1221 Avenue of the Americas

New York, NY 10020(888) 539-7474

www.sirius.com

SIR-ALP10T Manual (102405b)

® “SIRIUS” and the SIRIUS dog logo are registered trademarks of Sirius Satellite Radio Inc.

SIR-ALP10T - Amazon S3 · jazz, hot latin, reggae, rock and many more. Best of all, it’s all...

Documents

Transcript of SIR-ALP10T - Amazon S3 · jazz, hot latin, reggae, rock and many more. Best of all, it’s all...