SinMix 7Days Cube Test-Batch 1
description
Transcript of SinMix 7Days Cube Test-Batch 1
![Page 1: SinMix 7Days Cube Test-Batch 1](https://reader036.fdocuments.us/reader036/viewer/2022082223/563db881550346aa9a944f28/html5/thumbnails/1.jpg)
ADMATERIALS TECHNOLOGIES PTE LTD
Page: 1 of 1
Tel: (65) 6362 9066 Fax: (65) 6362 2080 Website: www.admaterials.com.sg58 Sungei Kadut Loop Singapore 729501 Co. Reg. No: 200805959C
Gen
erat
ed b
y A
dmat
eria
ls
PREPARED BY Su'aidah BinteAbu Bakar
Assistant Engineer APPROVED BY Sherly Wijaya Senior Lab Manager
Terms and Conditions:1. The Report is prepared based on the tests requested and on the specific items submitted to Admaterials for testing.Admaterials assumes no responsibility for
variations in quality or other characteristics of items submitted under conditions over which Admaterials has no control.This Report does not constitute arecommendation for, or endorsement of, the item or material tested.
2. Admaterials agrees to use a reasonable degree of diligence in the manner of performing the tests, inspections or services but no warranties are given andnone may be implied directly or indirectly relating to Admaterials test results, services or facilities. Admaterials shall not be liable for any collateral, special orconsequential damage.
3. The Report must not be used in advertisements without the written consent of Admaterials.4. The Report shall not be reproduced except in full and unless approval in writing has been given by Admaterials.5. No other third party can obtain the Report through Admaterials, unless specified in the Admaterials registration form or he has received written instruction from the
applicant to authorise Admaterials to do so.
The results reported herein have been performed inaccordance with the laboratory's termsof accreditation under the Singapore AccreditationCouncil - Singapore Laboratory Accreditation Scheme
TEST REPORT: COMPRESSIVE STRENGTH OF CONCRETE CUBES
TEST STANDARD : BS EN 12390-3: 2009
PROJECT TITLE : SINMIX TRIAL MIX
PROJECT CODE : F0849
CLIENT NAME : SINMIX PTE LTD
ADDRESS : 63 SENOKO DRIVE, WOODLANDS EAST INDUSTRIAL ESTATE,
ATTENTION TO : MISS CHRISTINE
TEL NO : 6759 1151
FAX NO : 6759 3353
ACCOUNT CHARGEABLE TO : SINMIX PTE LTD DATE OF COLLECTION : 09/09/2015
CONCRETE SUPPLIER : SINMIX PTE. LTD. DATE RECEIVED : 09/09/2015
CASTING LOCATION : ER478-WIDENING OF WOODLANDS ROAD, CHUA CHUKANG AND STAGMONT RING
DATE REPORTED : 14/09/2015
JOB REFERENCE CODE : C0075849CLIENT REF. SIZE (mm) DATE OF CAST AGE
(Days)
DATE OF TEST GRADE MASS OFSPECIMEN
(Kg)
DENSITY OFSPECIMEN(Kg/m3)
MAX LOAD(kN)
COMPRESSIVESTRENGTH
(MPa)
TM/B1/35PC-001 150x150x150 04/09/2015 8 12/09/2015 G35PC 7.970 2370 740.10 32.9
TM/B1/35PC-002 150x150x150 04/09/2015 8 12/09/2015 G35PC 8.018 2380 681.40 30.3
TM/B1/35PC-003 150x150x150 04/09/2015 8 12/09/2015 G35PC 7.994 2370 679.90 30.2
Average Compressive Strength (MPa) 31.1
TM/B2/35PC-001 150x150x150 04/09/2015 8 12/09/2015 G35PC 7.851 2330 715.40 31.8
TM/B2/35PC-002 150x150x150 04/09/2015 8 12/09/2015 G35PC 7.966 2370 720.60 32.0
TM/B2/35PC-003 150x150x150 04/09/2015 8 12/09/2015 G35PC 7.943 2360 682.80 30.3
Average Compressive Strength (MPa) 31.4
TM/B3/35PC-001 150x150x150 04/09/2015 8 12/09/2015 G35PC 7.765 2310 726.90 32.3
TM/B3/35PC-002 150x150x150 04/09/2015 8 12/09/2015 G35PC 7.968 2370 681.50 30.3
TM/B3/35PC-003 150x150x150 04/09/2015 8 12/09/2015 G35PC 7.868 2340 689.90 30.7
Average Compressive Strength (MPa) 31.1
Sample Condition When Received : Satisfactory Moisture Condition at Test : Saturated
REMARKS :
![Page 2: SinMix 7Days Cube Test-Batch 1](https://reader036.fdocuments.us/reader036/viewer/2022082223/563db881550346aa9a944f28/html5/thumbnails/2.jpg)
ADMATERIALS TECHNOLOGIES PTE LTD
Page: 1 of 1
Tel: (65) 6362 9066 Fax: (65) 6362 2080 Website: www.admaterials.com.sg58 Sungei Kadut Loop Singapore 729501 Co. Reg. No: 200805959C
Gen
erat
ed b
y A
dmat
eria
ls
PREPARED BY Su'aidah BinteAbu Bakar
Assistant Engineer APPROVED BY Sherly Wijaya Senior Lab Manager
Terms and Conditions:1. The Report is prepared based on the tests requested and on the specific items submitted to Admaterials for testing.Admaterials assumes no responsibility for
variations in quality or other characteristics of items submitted under conditions over which Admaterials has no control.This Report does not constitute arecommendation for, or endorsement of, the item or material tested.
2. Admaterials agrees to use a reasonable degree of diligence in the manner of performing the tests, inspections or services but no warranties are given andnone may be implied directly or indirectly relating to Admaterials test results, services or facilities. Admaterials shall not be liable for any collateral, special orconsequential damage.
3. The Report must not be used in advertisements without the written consent of Admaterials.4. The Report shall not be reproduced except in full and unless approval in writing has been given by Admaterials.5. No other third party can obtain the Report through Admaterials, unless specified in the Admaterials registration form or he has received written instruction from the
applicant to authorise Admaterials to do so.
The results reported herein have been performed inaccordance with the laboratory's termsof accreditation under the Singapore AccreditationCouncil - Singapore Laboratory Accreditation Scheme
TEST REPORT: COMPRESSIVE STRENGTH OF CONCRETE CUBES
TEST STANDARD : BS EN 12390-3: 2009
PROJECT TITLE : SINMIX TRIAL MIX
PROJECT CODE : F0849
CLIENT NAME : SINMIX PTE LTD
ADDRESS : 63 SENOKO DRIVE, WOODLANDS EAST INDUSTRIAL ESTATE,
ATTENTION TO : MISS CHRISTINE
TEL NO : 6759 1151
FAX NO : 6759 3353
ACCOUNT CHARGEABLE TO : SINMIX PTE LTD DATE OF COLLECTION : 09/09/2015
CONCRETE SUPPLIER : SINMIX PTE. LTD. DATE RECEIVED : 09/09/2015
CASTING LOCATION : ER478-WIDENING OF WOODLANDS ROAD, CHUA CHUKANG AND STAGMONT RING
DATE REPORTED : 14/09/2015
JOB REFERENCE CODE : C0075848CLIENT REF. SIZE (mm) DATE OF CAST AGE
(Days)
DATE OF TEST GRADE MASS OFSPECIMEN
(Kg)
DENSITY OFSPECIMEN(Kg/m3)
MAX LOAD(kN)
COMPRESSIVESTRENGTH
(MPa)
TM/B1/35N-001 150x150x150 04/09/2015 8 12/09/2015 G35N 8.111 2410 585.00 26.0
TM/B1/35N-002 150x150x150 04/09/2015 8 12/09/2015 G35N 8.081 2400 863.50 38.4
TM/B1/35N-003 150x150x150 04/09/2015 8 12/09/2015 G35N 7.975 2370 812.70 36.1
Average Compressive Strength (MPa) 33.5
TM/B2/35N-001 150x150x150 04/09/2015 8 12/09/2015 G35N 8.053 2390 813.10 36.1
TM/B2/35N-002 150x150x150 04/09/2015 8 12/09/2015 G35N 8.033 2380 817.90 36.4
TM/B2/35N-003 150x150x150 04/09/2015 8 12/09/2015 G35N 8.042 2390 866.00 38.5
Average Compressive Strength (MPa) 37.0
TM/B3/35N-001 150x150x150 04/09/2015 8 12/09/2015 G35N 8.086 2400 908.00 40.4
TM/B3/35N-002 150x150x150 04/09/2015 8 12/09/2015 G35N 8.061 2390 735.00 32.7
TM/B3/35N-003 150x150x150 04/09/2015 8 12/09/2015 G35N 8.085 2400 741.00 32.9
Average Compressive Strength (MPa) 35.3
Sample Condition When Received : Satisfactory Moisture Condition at Test : Saturated
REMARKS :
![Page 3: SinMix 7Days Cube Test-Batch 1](https://reader036.fdocuments.us/reader036/viewer/2022082223/563db881550346aa9a944f28/html5/thumbnails/3.jpg)
ADMATERIALS TECHNOLOGIES PTE LTD
Page: 1 of 1
Tel: (65) 6362 9066 Fax: (65) 6362 2080 Website: www.admaterials.com.sg58 Sungei Kadut Loop Singapore 729501 Co. Reg. No: 200805959C
Gen
erat
ed b
y A
dmat
eria
ls
PREPARED BY Su'aidah BinteAbu Bakar
Assistant Engineer APPROVED BY Sherly Wijaya Senior Lab Manager
Terms and Conditions:1. The Report is prepared based on the tests requested and on the specific items submitted to Admaterials for testing.Admaterials assumes no responsibility for
variations in quality or other characteristics of items submitted under conditions over which Admaterials has no control.This Report does not constitute arecommendation for, or endorsement of, the item or material tested.
2. Admaterials agrees to use a reasonable degree of diligence in the manner of performing the tests, inspections or services but no warranties are given andnone may be implied directly or indirectly relating to Admaterials test results, services or facilities. Admaterials shall not be liable for any collateral, special orconsequential damage.
3. The Report must not be used in advertisements without the written consent of Admaterials.4. The Report shall not be reproduced except in full and unless approval in writing has been given by Admaterials.5. No other third party can obtain the Report through Admaterials, unless specified in the Admaterials registration form or he has received written instruction from the
applicant to authorise Admaterials to do so.
The results reported herein have been performed inaccordance with the laboratory's termsof accreditation under the Singapore AccreditationCouncil - Singapore Laboratory Accreditation Scheme
TEST REPORT: COMPRESSIVE STRENGTH OF CONCRETE CUBES
TEST STANDARD : BS EN 12390-3: 2009
PROJECT TITLE : SINMIX TRIAL MIX
PROJECT CODE : F0849
CLIENT NAME : SINMIX PTE LTD
ADDRESS : 63 SENOKO DRIVE, WOODLANDS EAST INDUSTRIAL ESTATE,
ATTENTION TO : MISS CHRISTINE
TEL NO : 6759 1151
FAX NO : 6759 3353
ACCOUNT CHARGEABLE TO : SINMIX PTE LTD DATE OF COLLECTION : 09/09/2015
CONCRETE SUPPLIER : SINMIX PTE. LTD. DATE RECEIVED : 09/09/2015
CASTING LOCATION : ER478-WIDENING OF WOODLANDS ROAD, CHUA CHUAKANG AND STAGMONT RING
DATE REPORTED : 14/09/2015
JOB REFERENCE CODE : C0075847CLIENT REF. SIZE (mm) DATE OF CAST AGE
(Days)
DATE OF TEST GRADE MASS OFSPECIMEN
(Kg)
DENSITY OFSPECIMEN(Kg/m3)
MAX LOAD(kN)
COMPRESSIVESTRENGTH
(MPa)
TM/B1/30P-001 150x150x150 04/09/2015 8 12/09/2015 G30P 7.931 2350 709.90 31.6
TM/B1/30P-002 150x150x150 04/09/2015 8 12/09/2015 G30P 7.962 2360 687.40 30.6
TM/B1/30P-003 150x150x150 04/09/2015 8 12/09/2015 G30P 8.005 2380 698.70 31.1
Average Compressive Strength (MPa) 31.1
TM/B2/30P-001 150x150x150 04/09/2015 8 12/09/2015 G30P 8.046 2390 711.40 31.6
TM/B2/30P-002 150x150x150 04/09/2015 8 12/09/2015 G30P 7.990 2370 717.90 31.9
TM/B2/30P-003 150x150x150 04/09/2015 8 12/09/2015 G30P 7.976 2370 656.20 29.2
Average Compressive Strength (MPa) 30.9
TM/B3/30P-001 150x150x150 04/09/2015 8 12/09/2015 G30P 7.940 2360 627.20 27.9
TM/B3/30P-002 150x150x150 04/09/2015 8 12/09/2015 G30P 8.046 2390 731.50 32.5
TM/B3/30P-003 150x150x150 04/09/2015 8 12/09/2015 G30P 8.043 2390 634.80 28.2
Average Compressive Strength (MPa) 29.5
Sample Condition When Received : Satisfactory Moisture Condition at Test : Saturated
REMARKS :
![Page 4: SinMix 7Days Cube Test-Batch 1](https://reader036.fdocuments.us/reader036/viewer/2022082223/563db881550346aa9a944f28/html5/thumbnails/4.jpg)
ADMATERIALS TECHNOLOGIES PTE LTD
Page: 1 of 1
Tel: (65) 6362 9066 Fax: (65) 6362 2080 Website: www.admaterials.com.sg58 Sungei Kadut Loop Singapore 729501 Co. Reg. No: 200805959C
Gen
erat
ed b
y A
dmat
eria
ls
PREPARED BY Su'aidah BinteAbu Bakar
Assistant Engineer APPROVED BY Sherly Wijaya Senior Lab Manager
Terms and Conditions:1. The Report is prepared based on the tests requested and on the specific items submitted to Admaterials for testing.Admaterials assumes no responsibility for
variations in quality or other characteristics of items submitted under conditions over which Admaterials has no control.This Report does not constitute arecommendation for, or endorsement of, the item or material tested.
2. Admaterials agrees to use a reasonable degree of diligence in the manner of performing the tests, inspections or services but no warranties are given andnone may be implied directly or indirectly relating to Admaterials test results, services or facilities. Admaterials shall not be liable for any collateral, special orconsequential damage.
3. The Report must not be used in advertisements without the written consent of Admaterials.4. The Report shall not be reproduced except in full and unless approval in writing has been given by Admaterials.5. No other third party can obtain the Report through Admaterials, unless specified in the Admaterials registration form or he has received written instruction from the
applicant to authorise Admaterials to do so.
The results reported herein have been performed inaccordance with the laboratory's termsof accreditation under the Singapore AccreditationCouncil - Singapore Laboratory Accreditation Scheme
TEST REPORT: COMPRESSIVE STRENGTH OF CONCRETE CUBES
TEST STANDARD : BS EN 12390-3: 2009
PROJECT TITLE : SINMIX TRIAL MIX
PROJECT CODE : F0849
CLIENT NAME : SINMIX PTE LTD
ADDRESS : 63 SENOKO DRIVE, WOODLANDS EAST INDUSTRIAL ESTATE,
ATTENTION TO : MISS CHRISTINE
TEL NO : 6759 1151
FAX NO : 6759 3353
ACCOUNT CHARGEABLE TO : SINMIX PTE LTD DATE OF COLLECTION : 09/09/2015
CONCRETE SUPPLIER : SINMIX PTE. LTD. DATE RECEIVED : 09/09/2015
CASTING LOCATION : ER478-WIDENING OD WOODLANDS ROAD, CHUA CHUKANG AND STAGMONT RING
DATE REPORTED : 14/09/2015
JOB REFERENCE CODE : C0075850CLIENT REF. SIZE (mm) DATE OF CAST AGE
(Days)
DATE OF TEST GRADE MASS OFSPECIMEN
(Kg)
DENSITY OFSPECIMEN(Kg/m3)
MAX LOAD(kN)
COMPRESSIVESTRENGTH
(MPa)
TM/B1/35P-001 150x150x150 04/09/2015 8 12/09/2015 G35P 8.042 2390 817.30 36.3
TM/B1/35P-002 150x150x150 04/09/2015 8 12/09/2015 G35P 7.998 2370 776.20 34.5
TM/B1/35P-003 150x150x150 04/09/2015 8 12/09/2015 G35P 8.037 2390 825.60 36.7
Average Compressive Strength (MPa) 35.8
TM/B2/35P-001 150x150x150 04/09/2015 8 12/09/2015 G35P 8.138 2420 731.90 32.5
TM/B2/35P-002 150x150x150 04/09/2015 8 12/09/2015 G35P 8.056 2390 839.40 37.3
TM/B2/35P-003 150x150x150 04/09/2015 8 12/09/2015 G35P 8.044 2390 715.40 31.8
Average Compressive Strength (MPa) 33.9
TM/B3/35P-001 150x150x150 04/09/2015 8 12/09/2015 G35P 8.052 2390 875.10 38.9
TM/B3/35P-002 150x150x150 04/09/2015 8 12/09/2015 G35P 7.986 2370 911.10 40.5
TM/B3/35P-003 150x150x150 04/09/2015 8 12/09/2015 G35P 8.021 2380 862.80 38.3
Average Compressive Strength (MPa) 39.2
Sample Condition When Received : Satisfactory Moisture Condition at Test : Saturated
REMARKS :
![Page 5: SinMix 7Days Cube Test-Batch 1](https://reader036.fdocuments.us/reader036/viewer/2022082223/563db881550346aa9a944f28/html5/thumbnails/5.jpg)
ADMATERIALS TECHNOLOGIES PTE LTD
Page: 1 of 1
Tel: (65) 6362 9066 Fax: (65) 6362 2080 Website: www.admaterials.com.sg58 Sungei Kadut Loop Singapore 729501 Co. Reg. No: 200805959C
Gen
erat
ed b
y A
dmat
eria
ls
PREPARED BY Su'aidah BinteAbu Bakar
Assistant Engineer APPROVED BY Sherly Wijaya Senior Lab Manager
Terms and Conditions:1. The Report is prepared based on the tests requested and on the specific items submitted to Admaterials for testing.Admaterials assumes no responsibility for
variations in quality or other characteristics of items submitted under conditions over which Admaterials has no control.This Report does not constitute arecommendation for, or endorsement of, the item or material tested.
2. Admaterials agrees to use a reasonable degree of diligence in the manner of performing the tests, inspections or services but no warranties are given andnone may be implied directly or indirectly relating to Admaterials test results, services or facilities. Admaterials shall not be liable for any collateral, special orconsequential damage.
3. The Report must not be used in advertisements without the written consent of Admaterials.4. The Report shall not be reproduced except in full and unless approval in writing has been given by Admaterials.5. No other third party can obtain the Report through Admaterials, unless specified in the Admaterials registration form or he has received written instruction from the
applicant to authorise Admaterials to do so.
The results reported herein have been performed inaccordance with the laboratory's termsof accreditation under the Singapore AccreditationCouncil - Singapore Laboratory Accreditation Scheme
TEST REPORT: COMPRESSIVE STRENGTH OF CONCRETE CUBES
TEST STANDARD : BS EN 12390-3: 2009
PROJECT TITLE : SINMIX TRIAL MIX
PROJECT CODE : F0849
CLIENT NAME : SINMIX PTE LTD
ADDRESS : 63 SENOKO DRIVE, WOODLANDS EAST INDUSTRIAL ESTATE,
ATTENTION TO : MISS CHRISTINE
TEL NO : 6759 1151
FAX NO : 6759 3353
ACCOUNT CHARGEABLE TO : SINMIX PTE LTD DATE OF COLLECTION : 09/09/2015
CONCRETE SUPPLIER : SINMIX PTE. LTD. DATE RECEIVED : 09/09/2015
CASTING LOCATION : ER478-WIDENING OF WOODLANDS ROAD, CHUA CHUKANG AND STAGMONT RING
DATE REPORTED : 14/09/2015
JOB REFERENCE CODE : C0075846CLIENT REF. SIZE (mm) DATE OF CAST AGE
(Days)
DATE OF TEST GRADE MASS OFSPECIMEN
(Kg)
DENSITY OFSPECIMEN(Kg/m3)
MAX LOAD(kN)
COMPRESSIVESTRENGTH
(MPa)
TM/B1/30PC-001 150x150x150 04/09/2015 8 12/09/2015 G30PC 7.883 2340 614.80 27.3
TM/B1/30PC-002 150x150x150 04/09/2015 8 12/09/2015 G30PC 7.724 2290 577.50 25.7
TM/B1/30PC-003 150x150x150 04/09/2015 8 12/09/2015 G30PC 7.946 2360 610.50 27.1
Average Compressive Strength (MPa) 26.7
TM/B2/30PC-001 150x150x150 04/09/2015 8 12/09/2015 G30PC 7.804 2320 531.50 23.6
TM/B2/30PC-002 150x150x150 04/09/2015 8 12/09/2015 G30PC 7.880 2340 476.40 21.2
TM/B2/30PC-003 150x150x150 04/09/2015 8 12/09/2015 G30PC 7.900 2350 561.20 24.9
Average Compressive Strength (MPa) 23.2
TM/B3/30PC-001 150x150x150 04/09/2015 8 12/09/2015 G30PC 7.864 2340 538.50 23.9
TM/B3/30PC-002 150x150x150 04/09/2015 8 12/09/2015 G30PC 7.818 2320 572.40 25.4
TM/B3/30PC-003 150x150x150 04/09/2015 8 12/09/2015 G30PC 7.943 2360 534.20 23.7
Average Compressive Strength (MPa) 24.3
Sample Condition When Received : Satisfactory Moisture Condition at Test : Saturated
REMARKS :
![Page 6: SinMix 7Days Cube Test-Batch 1](https://reader036.fdocuments.us/reader036/viewer/2022082223/563db881550346aa9a944f28/html5/thumbnails/6.jpg)
ADMATERIALS TECHNOLOGIES PTE LTD
Page: 1 of 1
Tel: (65) 6362 9066 Fax: (65) 6362 2080 Website: www.admaterials.com.sg58 Sungei Kadut Loop Singapore 729501 Co. Reg. No: 200805959C
Gen
erat
ed b
y A
dmat
eria
ls
PREPARED BY Su'aidah BinteAbu Bakar
Assistant Engineer APPROVED BY Sherly Wijaya Senior Lab Manager
Terms and Conditions:1. The Report is prepared based on the tests requested and on the specific items submitted to Admaterials for testing.Admaterials assumes no responsibility for
variations in quality or other characteristics of items submitted under conditions over which Admaterials has no control.This Report does not constitute arecommendation for, or endorsement of, the item or material tested.
2. Admaterials agrees to use a reasonable degree of diligence in the manner of performing the tests, inspections or services but no warranties are given andnone may be implied directly or indirectly relating to Admaterials test results, services or facilities. Admaterials shall not be liable for any collateral, special orconsequential damage.
3. The Report must not be used in advertisements without the written consent of Admaterials.4. The Report shall not be reproduced except in full and unless approval in writing has been given by Admaterials.5. No other third party can obtain the Report through Admaterials, unless specified in the Admaterials registration form or he has received written instruction from the
applicant to authorise Admaterials to do so.
The results reported herein have been performed inaccordance with the laboratory's termsof accreditation under the Singapore AccreditationCouncil - Singapore Laboratory Accreditation Scheme
TEST REPORT: COMPRESSIVE STRENGTH OF CONCRETE CUBES
TEST STANDARD : BS EN 12390-3: 2009
PROJECT TITLE : SINMIX TRIAL MIX
PROJECT CODE : F0849
CLIENT NAME : SINMIX PTE LTD
ADDRESS : 63 SENOKO DRIVE, WOODLANDS EAST INDUSTRIAL ESTATE,
ATTENTION TO : MISS CHRISTINE
TEL NO : 6759 1151
FAX NO : 6759 3353
ACCOUNT CHARGEABLE TO : SINMIX PTE LTD DATE OF COLLECTION : 09/09/2015
CONCRETE SUPPLIER : SINMIX PTE. LTD. DATE RECEIVED : 09/09/2015
CASTING LOCATION : ER478-WIDENING OF WOODLANDS ROAD, CHUA CHUKANG LINK & STAGMONT RING
DATE REPORTED : 14/09/2015
JOB REFERENCE CODE : C0075845CLIENT REF. SIZE (mm) DATE OF CAST AGE
(Days)
DATE OF TEST GRADE MASS OFSPECIMEN
(Kg)
DENSITY OFSPECIMEN(Kg/m3)
MAX LOAD(kN)
COMPRESSIVESTRENGTH
(MPa)
TM/B1/30N-001 150x150x150 04/09/2015 8 12/09/2015 G30N 7.993 2370 657.60 29.2
TM/B1/30N-002 150x150x150 04/09/2015 8 12/09/2015 G30N 7.928 2350 645.30 28.7
TM/B1/30N-003 150x150x150 04/09/2015 8 12/09/2015 G30N 7.870 2340 660.80 29.4
Average Compressive Strength (MPa) 29.1
TM/B2/30N-001 150x150x150 04/09/2015 8 12/09/2015 G30N 7.972 2370 677.40 30.1
TM/B2/30N-002 150x150x150 04/09/2015 8 12/09/2015 G30N 8.041 2390 616.60 27.4
TM/B2/30N-003 150x150x150 04/09/2015 8 12/09/2015 G30N 8.063 2390 561.10 24.9
Average Compressive Strength (MPa) 27.5
TM/B3/30N-001 150x150x150 04/09/2015 8 12/09/2015 G30N 7.908 2350 671.80 29.9
TM/B3/30N-002 150x150x150 04/09/2015 8 12/09/2015 G30N 7.919 2350 645.90 28.7
TM/B3/30N-003 150x150x150 04/09/2015 8 12/09/2015 G30N 7.923 2350 664.20 29.5
Average Compressive Strength (MPa) 29.4
Sample Condition When Received : Satisfactory Moisture Condition at Test : Saturated
REMARKS :