Single Hung Window
Transcript of Single Hung Window
-
8/12/2019 Single Hung Window
1/5
whsThe Premiere
singlehungwindowALUMINUMSingle Hung Windo
Page 1
Vent Removable From Interior For Ease Of Cleaning - No Tools Required.
Concealed Block And Tackle (Spring And Pulley) Balances: No AdjustmentRequired.
Delrin Spring-Loaded Lock Placed At Bottom Of Vent Closes Securely OntoWindow Sill.
Integrally Extruded Continuous Lift Bar On Bottom Of Vent For EasyOpen/Close.
Vertical Weatherstrip On Interior And Exterior Verticals Of Vent ProvidesMaximum Weatherability.
Drop-In Screen For Effortless Installation.
671 West 18th Street, Hialeah, Florida 33010-Ph: (305)887-2646 Fax: (305) 883-1309
CCOLONIALOLONIAL 2/22/2
Metal finishes, glass and other options: on requestSpecifications & engineering details: on request
Our products are Dade County approved: code compliance on request
Return Hom
-
8/12/2019 Single Hung Window
2/5
whsThe Premiere
singlehungwindowALUMINUMSingle Hung Windo
Page 2
1/11/1
AARTRT DDECOECO II
AARTRT DDECOECO IIII
OORIOLERIOLE
CCAPEAPE CCODOD
BBARCELONAARCELONA
671 West 18th Street, Hialeah, Florida 33010-2480
Ph: (305)887-2646 Fax: (305) 883-1309
Return Hom
-
8/12/2019 Single Hung Window
3/5
whsThe Premiere
singlehungwindowALUMINUMSingle Hung Windo
Page 3
SS INGLEINGLE HHUNGUNG
WW INDOWINDOWSS INGLEINGLE HHUNGUNG
IIMPMPACTACT WW INDOWINDOW
STSTANDARDANDARD MUNTINSMUNTINS
COLONIALCOLONIAL STYLESTYLE MUNTINSMUNTINS
2/22/2 APPLIEDAPPLIED MUNTINSMUNTINS
COLONIALCOLONIAL APPLIEDAPPLIED MUNTINSMUNTINS
671 West 18th Street, Hialeah, Florida 33010-24Ph: (305)887-2646 Fax: (305) 883-1309
Return Hom
-
8/12/2019 Single Hung Window
4/5
whsThe Premiere
singlehungwindowALUMINUMSingle Hung Windo
Page 4
2 3/16W.D. SCHEDULES OF SIZES
SERIES 500 FLANGE TYPE
SERIES 507 INTEGRAL FIN TYPE
COLONIAL LITES AND SPECIAL SIZES AVAILABLE
EXTERIOR
EXTERIOR
SERIES 500
SERIES 500
PICTUREWINDOW
SINGLEHUNG
INTERIOR
PICTUREWINDOW
SINGLEHUNG
INTERIOR
INTERIOR
NOT TO SCALE
NO MULL REQUIREDINTERLOCKING JAMBS
SERIES 507INTEGRAL FIN TYPE
SERIES 500 S.H. & OUTSIDE GLAZEDP.W. WIGH YE 15 MULLION
SERIES 500 S.H. & INSIDE GLAZEDP.W. WIGH YE 164 MULLION
W.D.
W.D. W.D.
EXTERIOR
SINGLE
HUNG FIN
MALE JAMB
SINGLE HUNG
FIN FEMALE
JAMB
W.D. W.D.
1/2
SH-12 SH-1/2 32 SH-22 SH-32
1 3/16
2 5/8
1
WINDOW
DIMENSION
WINDOWD
IMENSION
Details Half SizeSERIES 500 FLANGE TYPE
HEIGHT26
38 3/8
50 5/8
63
74 1/4
19 1/8 26 1/2 37 53 1/8 WID
HEIGHT
36
44
52
60
72
24 32 36 40 44 W
SH-13 SH-1/2 33 SH-23 SH-33
SH-14 SH-1/2 34 SH-24 SH-34
SH-15 SH-1/2 35 SH-25 SH-35
SH-16 SH-1/2 36 SH-26 SH-36
2030 2830 3030 3430 3830
2038 2838 3038 3438 3838
2044 2844 3044 3444 3844
2050 2850 3050 3450 3850
2060 2860 3060 3460 3860
671 West 18th Street, Hialeah, Florida 33010-2480Ph: (305)887-2646 Fax: (305) 883-1309
Return Hom
-
8/12/2019 Single Hung Window
5/5
whsThe Premiere
singlehungwindowALUMINUMSingle Hu
WindoPage 1
Return Hom
SPECIFICATIONSSeries 500 Flange Type - DH-R40 Series 507 Integral Fin - DH-R40
GENERAL: Windows shall be single hung design as manufactured by the Yale Ogron Mfg. Co., Inc., of Hialeah,Florida, U.S.A. certified to meet DH-R40 specifications of the American Architectural Aluminum Manufacturers
Association (A.A.M.A.).
MATERIALS: All frames and sash members shall be extruded 6063-T5 aluminum alloy. Frame members shall havea minimum depth of 2 3/16 on Series #500 flange, and 2 9/16 on Series #507 fin, with wall of .062. Sash
members shall have a minimum depth of 1 and walls of .062,
CONSTRUCTION: Windows shall be coped at the corners and assembled with screws for tight unionWeatherstrip grooves shall be provided at the sash interlock and sill and jambs of sash.
HARDWARE & OPERATION: Sash operates on concealed spring and pulley balances. Sash may be removedfrom interior for access and cleaning of upper fixed lites. The sash lower rail contains an integrally extruded
continuous loft bar. Locking hardware shall be delrin plastic spring-loaded catches located at the sash and frame sill
Sash over 3 - 0 in width to contain (2) catches. All hardware easily removable before and after installation.
WEATHERSTRIPPING: Interior and exterior of sash vertical members contain wool pile which form acontinuous seal with elastomeric vinyl located at the sash sill and interlock profile.
FINISH: Windows shall be manufactured with standard mill finish. Other finishes available when specified.
INSECT SCREENS: half screens shall be included when specified. Full screens can be provided for use with theSeries #507 fin window when specified. Screen frame shall be of rolled aluminum box profile. Mesh fabric shall be
18-16. Spline is circular profiled plastic. All screens shall be mill finish unless specified.
ERECTION & CAULKING: Windows shall be erected by erecting contractor. Windows shall be erected plumblevel, and true. Windows shall not be distorted by erection screws or fittings, and screws shall not interfere with
operating mechanism of the window.
GLAZING: Windows shall be factory glazed with aluminum snap-on bead only when so specified.
CLEANING: All exposed portions of the window shall be cleaned by others (with mild detergent in warm wateron exposed surfaces) after construction work and painting has been completed.