SINGLE DUAL COMBI JET THRUSTERS FOR BOW … valve 24V 10kW 550A 600A 2 x 120Ah 3ft -> 2/0 AWG 4 min....
Transcript of SINGLE DUAL COMBI JET THRUSTERS FOR BOW … valve 24V 10kW 550A 600A 2 x 120Ah 3ft -> 2/0 AWG 4 min....
JET THRUSTERS FOR BOW AND STERN
SINGLE DUAL COMBI
The new choice in manoeuvring
HOLLANDMARINE PARTS
Installation kit contains:
Water intake combination (2x JT-90)- 1x Water inlet SS316 3” BSP- 1x 900 elbow SS316 F/F (Optional 2 x 450)- 1x Reducer 3” BSP/2½” BSP SS316- 1x Ball valve 2½” BSP- 1x Hose connector 3”/76mm- 1x Hose 3”/76mm 3.3 ft- 2x Hose clamp 77-94mm
Pressure hose combination - 1x Flexible pressure hose- 6x Hose clamp- 2x Hose connector SS316 - 2x Elbow 450 SS316 M/F - 2x Ball valve - 1x Control panel with Joystick
Jet Thruster Single
water intake protected by a grid
SS316 flange threaded nozzle
casted SS316 3-way valve
Advantages: ✓ Quiet operation ✓ No cavitation ✓ No large tunnels which are difficult to fit and cause more resistance ✓ No vulnerable propellers ✓ Outlet opening Ø 2 inch ✓ Flexible installation
THE NEW CHOICE IN MANEUVERING
A complete Jet Thruster system includes: • Pump unit & pump outlet • Valve(s) • Installation kit • Nozzles available for all types of hull plating.
Installation kit contains:
Water intake combination (2x JT-90S)- 1x Water inlet SS316 3” BSP- 1x 900 elbow SS316 F/F (Optional 2 x 450)- 1x Reducer 3” BSP/2½” BSP SS316- 1x Ball valve 2½” BSP- 1x Hose connector 2½” BSP SS316- 1x Hose 2½” BSP (3 ft)- 2x Hose clamp 77-94mm
Pressure hose combination ( 2” BSP JT-30/JT- 50, 2.5” BSP JT-90) - 1x Flexible pressure hose- 12x Hose clamp- 4x Hose connector SS316 - 4x Elbow 450 SS316 M/F - 4x Ball valve 2” BSP- 1x Control panel with Joystick
Jet Thruster Combifor maximum
maneuvrability
pump unit
flanged threaded nozzle
24V6kW380A425A2 x 105Ah3ft -> 1/0 AWG4 min.1 x Ø 3⅟₂”Nozzle Ø 1.26”2” 75 LBLxWxH: 19⅟₂x16.73x13-14.17 inchLxWxH: 9.44x6,29x7.44 inch
JT-50 110 thrust LBS 24VVoltage DCE-motor capacity kWCurrentMaster fuseRecommended battery capacity 12VBattery cable +/-Max. operating timeWater inletWater outletPressure hose diameterWeight pumpPump unit3-Way valve
JT-70 154 thrust LBS 24VVoltage DCE-motor capacity kWCurrentMaster fuseRecommended battery capacity 12VBattery cable +/-Max. operating timeWater inletWater outletPressure hose diameterWeight pumpPump unit3-Way valve
24V10kW550A600A2 x 120Ah3ft -> 2/0 AWG4 min.1x 4” BSPNozzle Ø 1.81”3” 95 LBLxWxH: 21.25x15.95x14 inchLxWxH: 11x9.25x9 inch
JT-90 198 thrust LBS 24VVoltage DCE-motor capacity kWCurrentMaster fuseRecommended battery capacity 12VBattery cable +/-Max. operating timeWater inletWater outletPressure hose diameterWeight pumpPump unit3-Way valve
24V14kW770A850A2 x 165Ah3ft -> 2/0 AWG4 min.1x 4” BSPNozzle 1.81”3” 130 LBLxWxH: 26.57x15x14.37 inchLxWxH: 11x9.25x9 inch
12V6kW850A1000A1 x 165Ah3ft -> 2/0 AWG4 min.1 x Ø/3⅟₂”Nozzle/1.26”2” 80 LBLxWxH: 19⅟₂x16.73x13-14.17 inchLxWxH: 9.44x6.29x7.44 inch
JT-50 110 thrust LBS 12VVoltage DCE-motor capacity kWCurrentMaster fuseRecommended battery capacity 12VBattery cable +/-Max. operating timeWater inletWater outletPressure hose diameterWeight pumpPump unit3-Way valve
190
597
,25
361,124
174
15
6
365,5
Description Project &
: 2-10-2011Date
:
DoNOTScale
Modified
:
A2Weight
Customer
Scale
Part No.
Material
Note
Date
Drawn
:
: Kg:
: 29-9-2011
: JvH
Sheet 1 of 1
1:5:
Reference :
STD . - JT-50Pomp Gr1_6kW explosiekap V30.03 0.03 0.2 0.2 Ra 3.2
DIMENSIONS IN MILLIMETERS, ANGLES IN DEGREESTOLERANCES±0.2mm, ±1º UNLESS OTHERWISE SPECIFIED
0.2
©copyrights H
MP
JET THRUSTER VERTICALPump unit placed in Vertical position, water intake direct on hull.
IP cover available for installation of pump unit in Gasoline engine areas.
Water intake side
SINGLE
COMBI
5° 15° 25° 35°
©copyrights H
MP
0.2
DIMENSIONS IN MILLIMETERS, ANGLES IN DEGREESTOLERANCES±0.2mm, ±1º UNLESS OTHERWISE SPECIFIED
Ra 3.20.20.20.030.03STD I-160-00 - Verticale Inlaat gelast configuraties
: Reference
: 1:5
Sheet 1 of 1
: JvH
: 20-12-2011
: : 1.55 Kg
:
Drawn
Date
Note
Material
Part No.
Scale
Customer
Weight
A4
: STD I-160-00
Modified
DoNOTScale
:
Date : 20-12-2011
Project &Description
183
101,6
190
575
240 188,5
425
360
,5
Description Project &
: 12-12-2011Date
:
DoNOTScale
Modified
:
A3Weight
Customer
Scale
Part No.
Material
Note
Date
Drawn
:
: Kg:
: 12-12-2011
:
Sheet 1 of 1
1:5:
Reference :
STD . - JT-50Pomp Gr1_6kW verticaal0.03 0.03 0.2 0.2 Ra 3.2
DIMENSIONS IN MILLIMETERS, ANGLES IN DEGREESTOLERANCES±0.2mm, ±1º UNLESS OTHERWISE SPECIFIED
0.2
©copyrights H
MP
50 150 250 350
22,63”
9⅟₂”ø4”
ø7,5”
7,2”
For installation of the vertical pump unit 5 different angled flanges are available to accom-mondate most hul angles.
JTC-30-00 / JTC-50-00
I-331-00I-312-00
I-331-00I-310-00
I-309-00
I-308-00I-307-00
I-304-00I-307-00I-306-00I-302-00
I-318-00V-201-00
I-114-00
I-113-00
I-114-00
I-115-00
I-316-00I-317-00
V-201-00
P-155-00
Jet Thruster Combi
Option 2a:
Option 1:
Option 2b: +
* JT-90; 2x water intake.
V-200-00
I-318-00 (2x)
I-317-00 (2x)
I-316-00 (2x)
I-215-00 (2x)
I-213-00
+
Pump unit JT-30 / JT-50 JTS-30-00 / JTS-50-00
3-Way valve V-101-00
Water inlet I-302-00Ring 3” BSP I-303-00Nut 3” BSP I-304-00Seal Rubber I-306-00Elbow 900 I-307-00
Reducer 3” BSP/2,5” BSP I-308-00Ball valve 2,5” BSP I-309-00Hose connector 2,5” BSP I-310-00Hose clamp 77-94mm I-331-00Hose 3” BSP/ L=3.3 ft I-312-00Pressure hose 2” I-113-00(L=33ft Flexible )
Hose clamp 48-60mm I-114-00Elbow 450 2” BSP M/F I-316-00Hose connector I-115-00Ball valve 2” BSP I-317-00Nozzles I-318-00
I-318-00 (2x)
I-317-00 (2x)
I-115-00 (2x)
I-114-00 (6x)V-100-00
I-113-00
JTS-30-00 / JTS-50-00
I-331-00 (2x)
I-312-00
I-310-00
I-309-00
I-308-00
I-307-00
I-302-00
I-113-00
I-113-00
I-316-00 (2x)
I-303-00
I-306-00
I-304-00
Jet Thruster Single
10 reasons to choose for a Jet Thruster
1 Silent operation In contradiction to a conventional tunnel thruster the Jet Thruster operation is quite. The are no sounds from a cavitating propeller producing the annoying loud sound that are common with conventional tunnel thrusters.
2 No tunnel The nozzles or outlet are flanged thru hulls with a very small diameter. There is no need to drill large holes for installation of a tunnel with no Fiberglassing. The Jet Thruster can be installed in vessels that cannot fit a conventional bow, stern or retractable thruster with ease.
3 One system for maximum control Besides the Jet Thruster Single for bow and stern thrusting a dual(combi) system is available. The combi for bow and stern enables you maximum control for your boat. With the combi you will have full directional control for perfect docking in all weather conditions.
4 Stern-Jet Install a stern Thruster in conjuction with your existing bow thruster for addional docking control.
5 Draft If you have a shallow draft boat or little room to install then the Jet Thruster is your solution. The nozzles can be places only a few inches below the waterline.
6 Flexible installation The components of the system allow for many installation options making this system adaptable to fit in most any boat of any size.
7 Quality, simplicity and reliability With no vulnerable electronic parts and standard electrical installation techniques it can be serviced all over the world without any special tools or equipment. Components that contact (sea) water are made of a corrosion resistant material.
8 Applicability The Jet Thruster can be applied in many Motorboats, Sailboats, Barges, Workboats, Catermarans constisting of polyesther, wood, steel and aluminium construction.
9 Reduce drag Saving fuel while increasing speed Large tunnels cause resistance costing fuel and decreased speed. The Jet Thruster however works with very small outlet openings in bow and stern. Great for the sailboater looking for every knot out of there boat.
10 Installation The installation is easy and does not require special or special tools. Due to the ease of installion it can be installed in a fraction of the time of a conventional thruster. Reducing installation cost for the OEM, Marina or even the do-it-yourselfers
C-20
0-01
Holland Marine Parts
Nozzle SS316900 transom nozzle
JT-30 / JT-50 32mm. I-342-00JT-70 / JT-90 46mm. I-242-00
rubberI-329-00
ringI-327-00
nutI-326-00Ø 60 mm.
900 transome nozzle to be installed on stern e.g. below swimming platform.
Frequency 433 & 869 MHz , 1 channelsNo. of function relays 4Duplex NoPower supply 12-24V DC & 230V AC & 115V AC & 24V ACMax current consumption 10-300Dimensions ~ 133 x 120 x 45 mm / ~ 5.2 x 4.7 x 1.8 inProtection IP65Radio type Double superheterodyneSensitivity -100 dBmBus system NoneRelay functionality Momentary, Latching, InterlockingAntenna 1 external BNCTemperature -20 to +55 C / -4 to +130 F869 MHz: ASM= 12-24V AC, BSM= 230V ACMax. number of transmitters 40
Frequency 433 & 869 MHz , 1 channelsModulation type FM-ModulationCode comb. 16.777.216Radio type PLL SynthesizerOutput 7 mW (by 50 ohm)Buttons 2/4 x 1-step buttonsNo. of batteries 3Batteries exchangableType of batteries 1.5V AAAWeight ~ 120 gr / ~ 0.3 lbDimensions ~ 66 x 113 x 35 mm / ~ 2.6 x 4.4 x 1.4 inWater resistant IP65
Holland Marine Parts Jet Thrusters can be controlled with the dedicated Wireless Control Unit.Enabling you docking and maneuvering your vessel with maximum control!• Water resistant (IP65) • Industrial quality • Comfortable grip
Complete kit contains: Transmitter, Receiver, Antenna + cable
Wireless docking for your VesselMaximum control!
Holland Marine Parts b.v. Donker Duyvisweg 297, 3316 BL Dordrecht, The Netherlands
P.O. Box 3050, 3301 DB Dordrecht Tel.: + 31 78 6174968 • Fax: + 31 78 6185921
Skype: Holland.Marine.Parts • [email protected]
The Jet Thruster systems and components are a brand of, and developed by: