Single and Multi Loop Controllers and Process Alarm … and Process Alarm Indicators ... 7 2108i...
Transcript of Single and Multi Loop Controllers and Process Alarm … and Process Alarm Indicators ... 7 2108i...
1 | P a g e
Single and Multi Loop
Controllers and Process Alarm
Indicators
April 1, 2012 V01_2
2 | P a g e
Page Product Page Product
3 iTools Engineering Studio and iTools Upgrade 44 3216i, 32h8i & 3204i Indicator and Limit Alarm Units
46 3200i Series Indicator Upgrades
2100 Series Controllers and Indicators 47 SUB32 Spares and Accessories
4 2116 & 2132 Single Loop Temperature Controller
5 2116i & 2132i Process Indicator and Alarm Unit 3500 Series Multi Loop Controllers
7 2108i Process Indicator and Alarm 48 3508 Multiloop Temperature and Process Controller
9 SUB21 Spare Parts and Accessories 50 3504 Multiloop Temperature and Process Controller
52 3500 Series Controller Software Upgrades
2200e Series Controllers and Indicators 53 SUB35 Spares and Accessories
10 2216e, 2208e and 2204e Single Loop Controllers
12 2200e Series FM Limit Alarm and Indicator Unit Mini-8 Advanced Multi Loop Process Controller
13 SUB22 Spare Parts and Accessories 55 Mini-8 Multiloop Process and Temperature Controller
56 Mini-8 Controller Software Upgrades
2400 Series Controllers and Indicators 57 SUBMIN8 Spares and Accessories
14 2416 Single Loop Temperature & Process Controller
17 2408 Single Loop Temperature & Process Controller 58 Nanodac Recorder and Controller
20 2404 Single Loop Temperature & Process Controller 59 Nanodac Upgrades
23 2408i Universal Process Indicator and Alarm Unit 60 Nanodac Spares and Accessories
27 SUB24 Spare Parts and Accessories
Accessories - Non Controller Specific
2604 & 2704 Multi Loop Advanced Controller 61 Accessories - 2000IO Rack & RFS DIN Rail Controller
28 2604 & 2704 High Performance Multiloop Controller 62 Accessories - Memocal, Config Station & KD485 Adaptor
31 2604 & 2704 Melt Pressure/Controller
33 2704VC Vacuum Furnace Controller/Programmer 63 2500 Series Multi Loop Controller
35 2604/2704CP Melt Pressure Controllers 65 2500E Base Processor
37 2604 Auto Responder Controller Upgrades 66 2500M IO Modules
38 2704 Auto Responder Controller Upgrades 67 2500T Terminal Block
39 SUB26 & SUB27 Spares and Accessories 68 2500B Base Rack
3200 Series Controllers and Indicators
69
2500 Accessories
40 3216 Single Loop Controller 70 Hardlock and Additional Software
42 3204, 32h8 and 3208 Single Loop Controller
43 3200 Series Controller Upgrades 71 Terms & Conditions of Sale
3 | P a g e
ITools Engineering Studio
Option Values Value Descriptions Price
Model Options ITOOLS Base Model -
ITOOLS CD Supplied on CD (See Note 1) $102
NONE None -
CONFIGURATION KIT NONE No Configuration Kit Available -
CONFIGURATOR SOFTWARE STD Config SW Enabled -
OPC SERVER STD Standard -
OPC Open OPC Server (See Note 1) $754
TRENDING AND LOGGING NOTREND None -
TREND Trend displays enabled $270
VIEW BUILDER NOVIEW None -
VIEW View builder enabled $270
SETPOINT NOSPE None -
SPE Standalone Setpoint programming editor $102
*Note1) If OPC Server option is ordered, the CD fee is waived.
iTools Software Upgrade
Option Values Value Descriptions Price
Model Options ITUPG Base Model -
EXISTING PRODUCT KEY XXXXXXXXXX Existing 10 digit product key
XXXXXXXXXXXXXXX Existing 20 digit Product key
NONE No Product key available
CONFIGURATION SOFTWARE NOC No change
STD Config SW enabled
OPC SERVER NOC No change -
STD OPC server standard -
OPC Open OPC server for 3rd party $754
TRENDING AND LOGGING NOC No change -
NOTREND Remove OPC Scope -
TREND Trend displays enabled $270
VIEW BUILDER NOC No change -
NOVIEW Remove View Builder -
VIEW View builder enabled $270
STANDALONE SETPOINT PROGRAMMER EDITOR NOC No change -
NOSPE Remove SPE -
SPE Standalone setpoint editor $102
4 | P a g e
Single Loop Controllers - 2100 Series
Option Values Value Descriptions Price
Model Options 2116 1/16th DIN Base Model $245
2132 1/32nd DIN Base Model $213
FUNCTION CC Controller
NF On/Off Alarm Controller
TC PID Controller + Timer
TN On/Off Controller + Timer
SUPPLY VOLTAGE VH 85 to 264Vac $0
VL 20 to 29Vac/dc $35
NON-STANDARD XXX Default
LOGIC OUTPUT AC Alarm Acknowledge/Reset
DB Deviation Band Alarm 1
DH Deviation High Alarm 1
DL Deviation Low Alarm 1
FH High Alarm 1
FL Low Alarm 1
KL Keypad lockout
LC PID Cooling
LH PID Heating
M1 PDSIO mode 1
NW New Alarm
XX Disabled
TM Timer Off/On
RELAY OUTPUT XX Disabled
RH PID Heating
RC PID Cooling
FH High Alarm 2
FL Low Alarm 2
AL High Alarm 2 & Low Alarm 3
DB Deviation Band Alarm 2
DL Deviation Low Alarm 2
DH Deviation High Alarm 2
NW New Alarm
EXT. RELAY MODULE XX No External Relay $0
R7 External Relay Module $37
INPUT ADAPTOR XX Not Fitted $0
V1 0-10Vdc input adaptor $37
A1 0-20mA Sense Resistor 2.49Ohm (0.1%) $12
5 | P a g e
2132i & 2116i Compact Indicator
Option Values Value Descriptions Price
Model Options 2116I Base Model $245
2132I
$213
FUNCTION AL Indicator/Alarm Unit -
FM Factory Mutual
$55
SUPPLY VOLTAGE VH 85-264Vac -
VL 20-29V dc or ac
$35
CUSTOM LABEL XXX Default LOGIC INPUT/OUTPUT AC Logic Input / Alarm Acknowledge /Reset
FH High Alarm 1 - Non Latched
FL Low Alarm 1 - Non Latched
HA High Alarm 1 - Latched
KL Logic Input Keypad lockout
LA Low Alarm 1 - Latched
NW New Alarm - Latched
XX Disabled - Indicator Only
RELAY OUTPUT XX Disabled - Indicator Only
FH High Alarm 2 - Non Latched
FL Low Alarm 2 - Non Latched
AL High Alarm 2/Low 3 - Non Latch
HA High Alarm 2 - Latched
LA Low Alarm 2 - Latched
AA High Alarm 2/Low 3 - Latched
NW New Alarm - Latched
SENSOR INPUT Default Configuration G 0 to 5Vdc Linear
1 Ni/Ni18%Mo Thm'cple J J Thermocouple
2 Pt20%Rh/Pt40%Rh Thm'cple K K Thermocouple
3 W/W26%Re Thm'cple L L Thermocouple
4 W/W26%Re Thm'cple M -12 to 80mV Linear
5 W5%Re/W26%Re Thm'cple N N Thm'cple Nicrosil/NiSil
6 W5%Re/W26%Re Thm'cple P Platinel II Thm'cple
7 Pt10%Rh/Pt40%Rh Thm'cple R R Thm'cple Pt/Pt13%Rh
8 Exegen K80 I.R.Pyrometer S S Thm'cple Pt/Pt10%Rh
A 4 to 20mA Linear T T Thermocouple
B B Thm'cple Pt/Pt30%Rh -6%Rh V 1 to 10Vdc Linear
C *C Thm'cple W5%Re/W26%Re W 1 to 5Vdc Linear
D D Thm'cple W3%Re/W25%Re X Non Standard
6 | P a g e
E E Thermocouple Y 1 to 20mA Linear
F -100 to +100mV Linear Z RTD/PT100 DIN 43759
MINIMUM RANGE * User defined range MAXIMUM RANGE * User defined range DISPLAY UNITS C Centigrade
F Fahrenheit
K Kelvin
X Blank
Default Config
EXTERNAL RELAY MODULE XX Not Fitted -
R7 Fitted (Driven By Logic O/P)
$37
INPUT ADAPTOR XX Not Fitted -
V1 0-10Vdc input adaptor
$37
A1 0-20mA Sense Res'r 2.49Ohm0.1%
$12
7 | P a g e
2108i Indicator and Alarm
Options Values Value Descriptions Price
Model Options 2108I Base Model
$370
FUNCTION AL Indicator/Alarm Unit DISPLAY COLOR GN Green Display
RD Red Display
SUPPLY VOLTAGE VH 85-264Vac RELAY OUTPUT 1 RF Relay Fitted Unconfigured
FH High Alarm 1-Unlatched
FL Low Alarm 1-Unlatched
AL High Alarm 1 & Low Alarm 3-Unl
RA Rate-of-change Alarm 1-Unlatch
HA High Alarm 1-Latched
LA Low Alarm 1-Latched
RT Rate of Change Alarm 1-Latched
AA High Alarm 1 & Low Alarm 3-Lat
NW New Alarm
XX Disabled
RELAY OUTPUT 2 RF Relay Fitted Unconfigured
FH High Alarm 1-Unlatched
FL Low Alarm 1-Unlatched
RA Rate-of-change Alarm 1-Unlatch
HA High Alarm 1-Latched
LA Low Alarm 1-Latched
RT Rate of Change Alarm 1-Latched
NW New Alarm
XX Disabled
CUSTOM LABEL XXXXX Default SENSOR INPUT Default Configuration G 0 to 5Vdc Linear
1 Ni/Ni18%Mo Thm'cple J J Thermocouple
2 Pt20%Rh/Pt40%Rh Thm'cple K K Thermocouple
3 W/W26%Re Thm'cple L L Thermocouple
4 W/W26%Re Thm'cple M -12 to 80mV Linear
5 W5%Re/W26%Re Thm'cple N N Thm'cple Nicrosil/NiSil
6 W5%Re/W26%Re Thm'cple P Platinel II Thm'cple
8 | P a g e
7 Pt10%Rh/Pt40%Rh Thm'cple R R Thm'cple Pt/Pt13%Rh
8 Exegen K80 I.R.Pyrometer S S Thm'cple Pt/Pt10%Rh
A 4 to 20mA Linear T T Thermocouple
B B Thm'cple Pt/Pt30%Rh -6%Rh V 1 to 10Vdc Linear
C *C Thm'cple W5%Re/W26%Re W 1 to 5Vdc Linear
D D Thm'cple W3%Re/W25%Re X Non Standard
E E Thermocouple Y 1 to 20mA Linear
F -100 to +100mV Linear Z RTD/PT100 DIN 43759
MINIMUM RANGE * User defined range
MAXIMUM RANGE * User defined range DISPLAY UNITS C Centigrade
F Fahrenheit
K Kelvin
X Blank
INPUT ADAPTOR XX Not Fitted
V1 0-10Vdc input adaptor
$37
A1 0-20mA Sense Res'r 2.49Ohm0.1%
$12
9 | P a g e
SUB21 Spare Parts and Accessories
Option Description Values Value Descriptions Price
Model Options SUB21 Base Model -
SUB21 R7 SUB21/0ARELAY $37
SUB21 V1 SUB21/IV10 $37
SUB21 BEZ2132 Bezel 2132 $31
SUB21 BEZ132I Bezel 2132I $31
SUB21 BEZ2116 Bezel 2116 $36
SUB21 BEZ116I Bezel 2116I $36
SUB21 BEZ108I Bezel 2108I $43
SUB21 SLE2132 Sleeve 2132 $60
SUB21 SLE132I Sleeve 2132I $60
SUB21 SLE2116 Sleeve 2116 $70
SUB21 SLE116I Sleeve 2116I $70
SUB21 SLE108I Sleeve 2108I $90
SUB21 DB2132 Display/Bezel 2132 $77
SUB21 DB2132I Display/Bezel 2132i $77
SUB21 DB2116 Display/Bezel 2116 $92
SUB21 DB108IR 2108i DISP/BEZ RED $143
SUB21 DB108IG 2108i DISP/BEZ GREEN $143
SUB21 GAS08 Gasket & seal kit $15
SUB21 2R49.1 2R49 0.1% SENSE RESISTOR $12
10 | P a g e
Single Loop Controllers – 2200e Series
Option Values Value Descriptions Price
Model Options 2204E 1/4th DIN Base Model $485
2208E 1/8th DIN Base Model $431
2216E 1/16th DIN Base Model $268
FUNCTION VC VALVE POSITIONER
AL ALARM UNIT
CC CONTROLLER
NF ON/OFF CONTROLLER
SUPPLY VOLTAGE VH 85 TO 264 VAC OUTPUT 1 R1 RELAY $47
RH RELAY PID HEATING $47
RU VP RAISE OUTPUT $47
FH HIGH ALARM RELAY $47
FL LOW ALARM RELAY $47
DB DEV BAND ALARM RELAY $47
DL DEV LOW ALARM RELAY $47
DH DEV HIGH ALARM RELAY $47
L1 LOGIC OUTPUT $47
LH LOGIC PID HEATING $47
M1 PDSIO Mode 1 $47
M2 PDSIO Mode 2 $47
T1 TRIAC OUTPUT $47
TH TRIAC PID HEATING $47 Note 1)
TU VP RAISE OUTPUT $47 Retrans chart
D6 DC Retransmission Unconfigured (See Note 1) $66 V = PV
C6 0 to 20mA PID COOLING (ISOLATED) $66 O = OP
C7 4 to 20mA PID COOLING (ISOLATED) $66 Z = Error
D3 DC Control Output (ISOLATED) $66 3 = 0 - 5Vdc
H6 0 to 20mA PID HEATING (ISOLATED) $66 4 = 1 - 5 Vdc
H7 4 to 20mA PID HEATING (ISOLATED) $66 5 = 0 - 10Vdc
OUTPUT 2 R1 RELAY-UNCONFIGURED $47
FH HIGH ALARM RELAY 2 $47
FL LOW ALARM RELAY 2 $47
DB DEV BAND ALARM RELAY 2 $47
DL DEV LOW ALARM RELAY 2 $47
DH DEV HIGH ALARM RELAY 2 $47
RC RELAY PID COOLING $47
RW VP LOWER OUTPUT $47
RH HEATING OUTPUT RELAY $47
AL HIGH & LOW ALARMS $47
L1 LOGIC-UNCONFIGURED $47
LC LOGIC PID COOLING $47
LH LOGIC HEATING OUTPUT $47
AM AUTO/MANUAL SELECT $47
S2 SETPOINT 2 SELECT $47
AC ALARM ACKNOWLEDGE/RESET $47
SB STANDBY MODE $47
11 | P a g e
T1 TRIAC - UNCONFIGURED $47
TC TRIAC - PID COOLING $47
TW TRIAC - VP LOWER OUTPUT $47
TH HEATING OUTPUT TRIAC $47
XX NONE $0
ALARM 1 RELAY RF RELAY CHANGE-OVER UNCONFIGURED $32
DB DEVIATION BAND ALARM RELAY 2 $32
DH DEVIATION HIGH ALARM RELAY 2 $32
DL DEVIATION LOW ALARM RELAY 2 $32
FH HIGH LIMIT ALARM $32
FL LOW LIMIT ALARM $32
HF HEATER FAULT - REQUIRES PDSIO MODE2 $32
LF LOAD FAULT - REQUIRES PDSIO MODE1 $32
RC RELAY PID COOLING $32
RH RELAY PID HEATING $32
SF SSRELAY FAULT-REQUIRES PDSIO MODE2 $32
AL HIGH & LOW ALARMS 3 & 4 $32
XX NONE $0
ALARM 2 RELAY XX NONE $0
RF RELAY CHANGE-OVER $32
DB DEVIATION BAND ALARM RELAY 2 $32
DH DEVIATION HIGH ALARM RELAY 2 $32
DL DEVIATION LOW ALARM RELAY 2 $32
FH HIGH LIMIT ALARM $32
FL LOW LIMIT ALARM $32
RC RELAY PID COOLING $32
RH RELAY PID HEATING $32
AL HIGH & LOW ALARMS 3 & 4 $32
COMMUNICATIONS 2AE EIA-232 EI BISYNCH PROTOCOL $115
2AM EIA-232 MODBUS PROTOCOL $115
2YE EIA-485 EI BISYNCH PROTOCOL $115
2YM EIA-485 MODBUS PROTOCOL $115
2FE EIA-422 EI BISYNCH PROTOCOL $115
2FM EIA-422 EI MODBUS PROTOCOL $115
2DN DEVICENET $155
2XX NONE $0
CUSTOM LABEL XXXXX No Custom Label Needed
F0492 Must choose F0492 if choosing EU0492 option
NONSTANDARDS EU0555 MUST CHOOSE THIS OPTION WITH D3, H6, H7, C6 or C7 (unless other non-standard is chosen) $0
EU0492 DIN Rail with TC, mA and mV input/Modbus, Profibus and Dnet comms $99
EU0511 DIN Rail with RTD, mA and mV input / Modbus only $99
XXXXX Standard Unit $0
12 | P a g e
2200e Series FM Alarm Units
Option Values Value Descriptions Price
Model Options 2204e 1/4th DIN Base Model $477
2208e 1/8th DIN Base Model $445
2216e 1/16th DIN Base Model $305
FUNCTION NS Alarm Unit SUPPLY VOLTAGE VH 85 TO 264 VAC OUTPUT 1 R1 RELAY OUTPUT $47
FH HIGH ALARM RELAY $47
FL LOW ALARM RELAY $47
L1 LOGIC INPUT/OUTPUT $47
V1 PV Retransmission 0 to 20mA $66
V2 PV Retransmission 4 to 20mA $66
V3 PV Retransmission 0 to 5V $66
V4 PV Retransmission 1 to 5V $66
V5 PV Retransmission 0 to 10V $66
P1 SP Retransmission 0 to 20mA $66
P2 SP Retransmission 4 to 20mA $66
P3 SP Retransmission 0 to 5V $66
P4 SP Retransmission 1 to 5V $66
OUTPUT 2 R1 RELAY-UNCONFIGURED $47
FH HIGH ALARM RELAY 2 $47
FL LOW ALARM RELAY 2 $47
L1 LOGIC-UNCONFIGURED $47
XX NONE -
ALARM 1 RELAY RF RELAY CHANGE-OVER UNCONFIGURED (Default) $0
ALARM 2 RELAY RF RELAY CHANGE-OVER UNCONFIGURED (Default) $0
COMMUNICATIONS 2AM EIA-232 MODBUS PROTOCOL $115
2YM EIA-485 MODBUS PROTOCOL $115
2FM EIA-422 MODBUS PROTOCOL $115
2XX NONE -
MANUAL ENG English
LABEL F0511 DIN RAIL OPTION $99
XXXXX STANDARD
NON-STANDARD EU0523 FM HIGH LIMIT ALARM
EU0563 FM HIGH LIMIT ALARM - WITH DIN RAIL (Must select F0511 as well)
13 | P a g e
SUB22 Spare Parts and Accessories
Option Values Value Descriptions Price
SUB22 D3 DC Output Isolated 22XX $66
SUB22 L1 LOG/PDSIO Output non-isolated 22XX $47
SUB22 R1 RELAY Output 22XX $47
SUB22 T1 TRIAC Output 22XX $47
SUB22 2YM 2WIRE EIA-485 MODBUS $115
SUB22 2YE 2WIRE EIA-485 BISYNCH $115
SUB22 2FM 4WIRE EIA-422 MODBUS $115
SUB22 2FE 4WIRE EIA-422 BISYNCH $115
SUB22 2AM EIA-232 MODBUS $115
SUB22 2AE EIA-232 BISYNCH $115
SUB22 2DN DEVICENET COMMS $155
SUB22 BEZ216E BEZEL 2216E $36
SUB22 BEZ208E BEZEL 2208E $43
SUB22 BEZ204E BEZEL 2204E $55
SUB22 SLE216E SLEEVE 2216E $73
SUB22 SLE208E SLEEVE 2208E $95
SUB22 SLE204E SLEEVE 2204E $106
SUB22 DB2216E 2216E BEZEL & DISPLAY $73
SUB22 DB2208E 2208E BEZEL & DISPLAY $92
SUB22 DB2204E 2204E BEZEL & DISPLAY $103
SUB22 T485 Comms Terminator Assembly $22
SUB22 GAS08 Seal & Gasket set $15
SUB22 2R49.1 2R49 0.1% SENSE RESISTOR $12
14 | P a g e
Single Loop Controllers - 2416
Option Value Descriptions Price
Model 2416 1/16th DIN Base Model
FUNCTION CC PID Controller $373
CG PID Controller with Single 8-Seg Program $373
CP PID Controller with Single 16-Seg Program $557
P4 PID Control with Four Programs $621
VC Valve Position Control $373
VG Valve Position with Single 8-Seg Program $373
VP Valve Position with Single 16-Seg Program $557
V4 Valve Position with 4 Programs $621
NF On/Off Controller $373
NG On/Off Controller with Single 8 Seg Programmer $373
NP On/Off Controller with Single 16 Seg Programmer $557
N4 On/Off Controller with Four 16 Seg Programmer $621
SUPPLY VOLTAGE VH 85 to 264Vac $0
VL 20 to 29Vac/dc $65
MODULE 1 R2 Single 2-Pin Relay Fitted Unconfigured $61
RH Relay PID Heating $61
RU Relay Valve Raise Output (With VC, VG, VP or V4) $61
FH Relay High Alarm 1 $61
FL Relay Low Alarm 1 $61
DB Relay Deviation Band Alarm 1 $61
DL Relay Deviation Low Alarm 1 $61
DH Relay Deviation High Alarm 1 $61
L2 Logic Output Fitted Unconfigured $61
LH Logic PID Heating $61
M1 Logic Output PDSIO Mode 1 $61
M2 Logic Output PDSIO Mode 2 $61
T2 Triac Output Fitted Unconfigured $61
TH Triac PID Heating $61
TU Triac Valve Raise Output $61
D2 DC Analog Output Fitted Unconfigured $76
H1 0 to 20mA PID Heating $76
H2 4 to 20mA PID Heating $76
H3 0 to 5V PID Heating $76
H4 1 to 5V PID Heating $76
H5 0 to 10V PID Heating $76
XX None $0
MODULE 2 R2 Relay Output Fitted Unconfigured $61
RC Relay PID Cooling $61
RW Relay Valve Lower Output (With VC, VG, VP or V4) $61
FH Relay High Alarm 2 $61
FL Relay Low Alarm 2 $61
15 | P a g e
DB Relay Deviation Band Alarm 2 $61
DL Relay Deviation Low Alarm 2 $61
DH Relay Deviation High Alarm 2 $61
PO Relay Program Event O/P1 $61
PE Relay Program End O/P $61
L2 Logic Output Fitted Unconfigured $61
LC Logic PID Cooling $61
T2 Triac Output Fitted Unconfigured $61
TC Triac PID Cooling $61
TW Triac Valve Lower Output $61
D2 DC Analog Fitted Unconfigured $76
C1 0 to 20mA PID Cooling $76
C2 4 to 20mA PID Cooling $76
C3 0 to 5V PID Cooling $76
C4 1 to 5V PID Cooling $76
C5 0 to 10V PID Cooling $76
XX None $0
MODULE 3 R2 Relay Fitted Unconfigured $61
FH Relay High Alarm 4 $61
FL Relay Low Alarm 4 $61
DB Relay Deviation Band Alarm 4 $61
DL Relay Deviation Low Alarm 4 $61
DH Relay Deviation High Alarm 4 $61
RA Relay Rate of Change Alarm 4 $61
PO Relay Program Event O/P 2 $61
PE Relay Program End O/P $61 Note 1)
LF Relay Load Failure $61 Retrans chart
HF Relay Heater Failure $61 V = PV
SF Relay SSR Failure $61 O = OP
L2 Logic Output Fitted Unconfigured $61 Z = Error
T2 Triac Output Fitted Unconfigured $61 3 = 0 - 5Vdc
D2 DC Retransmission Output Unconfigured (See Note 1) $76 4 = 1 - 5 Vdc
XX None $0 5 = 0 - 10Vdc
COMMS A2 RS232 Fitted Unconfigured $115
AM RS232 Modbus Protocol $115
AE RS232 EI-Bisynch Protocol $115
F2 RS422 Fitted Unconfigured $115
FM RS422 Modbus Protocol $115
FE RS422 EI-Bisynch Protocol $115
Y2 RS485 Fitted Unconfigured $115
YM RS485 Modbus Protocol $115
YE RS485 EI-Bisynch Protocol $115
XX None $0
MANUAL ENG English
SENSOR INPUT 1 Ni/Ni18%Mo Thm'cple
2 Pt20%Rh/Pt40%Rh Thm'cple
3 W/W26%Re Thm'cple
4 W/W26%Re Thm'cple
5 W5%Re/W26%Re Thm'cple
6 W5%Re/W26%Re Thm'cple
7 Pt10%Rh/Pt40%Rh Thm'cple
8 Exegen K80 I.R.Pyrometer
A 4 to 20mA Linear
B B Thm'cple Pt/Pt30%Rh -6%Rh
C *C Thm'cple W5%Re/W26%Re
D D Thm'cple W3%Re/W25%Re
E E Thermocouple
F -100 to +100mV Linear
16 | P a g e
G 1 to 5Vdc Linear
J J Thermocouple
K K Thermocouple
L L Thermocouple
M -12 to 80mV Linear
N N Thm'cple Nicrosil/NiSil
P Platinel II Thm'cple
R R Thm'cple Pt/Pt13%Rh
S S Thm'cple Pt/Pt10%Rh
T T Thermocouple
V 0 to 10Vdc Linear
W 0 to 5Vdc Linear
X Non Standard
Y 0 to 20mA Linear
Z RTD/PT100 DIN 43760
MINIMUM RANGE * User defined range
MAXIMUM RANGE * User defined range
DISPLAY UNITS C Centigrade
F Fahrenheit
K Kelvin
X Blank
Default Config
OPTIONS 1 XX None
DP Direct Acting PID Ctrl.
OPTIONS 2 XX None
PD Power Feedback Disabled
OPTIONS 3 XX None
CF Fan Cooling
CW Water Cooling
CL Oil Cooling
CO On/Off Cooling
OPTIONS 4 XX None
MD Auto/Man Button Disabled
RD Run/Hold Button Disabled
MR Auto/Man & Run/Hold Disabled
OPTIONS 5 XX None
HD Dwell Time In Hours
HR Ramp Rate in Units/Hour
HT Dwell & Ramp in Hours
17 | P a g e
Single Loop Controllers - 2408
Option Values Description Price Values Description Price
Model 2408 1/8th DIN Controller
2408f Profibus model $75
FUNCTION CC Controller $538 V4 VP/4-Programs $774
CG Single 8-Seg Program $538 VM VP/20-Programs (not for 2408f) $873
CP Single 16-Seg Program $712 NF On/Off Controller $538
P4 Four Programs $774 NG 1X8 Seg Programmer $538
CM 20 Programs (not for 2408f) $873 NP 1X16 Seg Programmer $712
VC Valve Positioner $538 N4 4X16 Seg Programmer $774
VG VP Single 8-Seg Program $538 NM 20X16 Seg Programmer (not for 2408f) $873
VP VP Single 16-Seg Program $712
SUPPLY VOLTAGE VH 85 to 264Vac $0 VL 19 to 29Vac/dc $65
MODULE 1 R2 Relay Fitted Unconfigured $61 H8 0 to 5V PID Heating $104
RH Relay PID Heating $61 H9 1 to 5V PID Heating $104
RU Valve Raise Output $61 HZ 0 to 10V PID Heating $104
R4 Fitted Unconfigured $61 TL Fitted Unconfigured $104
YH PID Heating $61 TP Fitted Unconfigured $104
FH High Alarm $61 TK Triple Contact I/P $104
FL Low Alarm $61 RR Dual Relay Fitted Unconfigured $114
DB Deviation Band Alarm $61 RD PID Heat and Cool $114
DL Deviation Low Alarm $61 RM VP Raise and Lower OP's $114
DH Deviation High Alarm $61 TT Dual Triac Fitted Unconfigured $114
L2 Logic Fitted Unconfigured $61 TD Triac PID Heat and Cool $114
LH Logic PID Heating $61 TM VP Raise and Lower OP's $114
M1 PDSIO Mode 1 $61 LR Logic/Relay Fitted Unconfigured $114
M2 PDSIO Mode 2 $61 LD logic+relay PID Heat & Cool $114
T2 Fitted Unconfigured $61 LT Fitted Unconfigured $114
TH Triac PID Heating $61 GD PID Heat and Cool $114
TU Valve Raise Output $61 XX None $0
D4 DC Output Fitted Unconfigured $104 G3 OP Voltage 5V $61
H6 0 to 20mA PID Heating $104 G5 OP Voltage 10V $61
H7 4 to 20mA PID Heating $104 LO Isolated Logic Output $104
MODULE 2 R2 Relay Fitted Unconfigured $61 D4 Fitted Unconfigured $104
RC Relay PID Cooling $61 C6 0 to 20mA PID Cooling $104
RW Relay Valve Lower Output $61 C7 4 to 20mA PID Cooling $104
R4 Form C Relay Unconfigured $61 C8 0 to 5V PID Cooling $104
YC Form C Relay PID Cooling $61 C9 1 to 5V PID Cooling $104
PO Program Output 1 $61 CZ 0 to 10V PID Cooling $104
PE Program End O/P $61 G3 OP Voltage 5V $61
FH High Alarm 2 $61 G5 OP Voltage 10V $61
FL Low Alarm 2 $61 LO Isolated Logic Output $104
DB Deviation Band Alarm 2 $61 TL Fitted Unconfigured $104
18 | P a g e
DL Deviation Low Alarm 2 $61 TP Fitted Unconfigured $104
DH Deviation High Alarm 2 $61 TK Triple Contact I/P $104
RR Dual Relay Fitted Unconfigured $114 MS 24Vdc Transmitter PSU $104
PP Program Outputs 1 & 2 $114 VS VP Pot I/P Feedback $104
L2 Logic Fitted Unconfigured $61 VU VP Pot I/P Unconfigured $104
LC Logic PID Cooling $61 VR VP Pot I/P Setpoint $104
T2 Triac Fitted Unconfigured $61 D6 Fitted Unconfigured (see note 1) $104
TC Triac PID Cooling $61 XX None $0
TW Valve Lower Output $61
MODULE 3 R2 Relay Fitted Unconfigured $61 TL Fitted Unconfigured $104
R4 Form C Fitted Unconfigured $61 TP Fitted Unconfigured $104
PO Program Output 4 $61 TK Triple Contact I/P $104
PE Program End O/P $61 MS 24Vdc Transmitter $104
FH High Alarm 3 $61 VS VP Pot I/P Feedback $104
FL Low Alarm 3 $61 VU VP Pot I/P Unconfigured $104
DB Deviation Band Alarm 3 $61 VR VP Pot I/P Setpoint $104
DL Deviation Low Alarm 3 $61 W2 4 to 20mA Setpoint $104
DH Deviation High Alarm 3 $61 W5 0 to 10V Setpoint $104
L2 Logic Fitted Unconfigured $61 D5 DC intput unconfigured $104
T2 Triac Fitted Unconfigured $61 WP Second PV I/P $104
D2 DC output Fitted Unconfigured $76 D6 Fitted Unconfigured $104
RR Dual Relay Fitted Unconfigured $114 XX None $0
PP Program Outputs 4 & 5 $114 LO Isolated Logic Output $104
ALARM RELAY RF Relay Fitted Unconfigured $32 LF PDSIO Load Failure $32
FH High Alarm $32 HF PDSIO Heater Failure $32
FL Low Alarm $32 SF PDSIO SSR Failure $32
DB Deviation Band Alarm $32 PO Program Output 6 $32
DL Deviation Low Alarm $32 PE Program End O/P $32
DH Deviation High Alarm $32 XX None $0
RA Rate of Change $32
COMMS 1 A2 RS232 Fitted Unconfigured $115 Y2 RS485 Fitted Unconfigured $115
AM RS232 Modbus Protocol $115 YM RS485 Modbus Protocol $115
AE RS232 EI Bisynch Protocol $115 YE RS485 EI Bisynch Protocol $115
F2 RS422 Fitted Unconfigured $115 XX None $0
FM RS422 Modbus Protocol $115 DN DeviceNet $155
FE RS422 EI Bisynch Protocol $115 M7 Fitted Unconfigured $95
PB Profibus High Speed Comms $155
COMMS 2 M6 Fitted Unconfigured $95 TS Setpoint Retrans $95
RS Setpoint Input $95 OT Output Retrans $95
M7 Fitted Unconfigured $95 XX None $0
PT PV Retrans $95
MANUAL ENG English
SENSOR INPUT 1 Ni/Ni18%Mo Thm'cple J J Thermocouple
2 Pt20%Rh/Pt40%Rh Thm'cple K K Thermocouple
3 W/W26%Re Thm'cple L L Thermocouple
4 W/W26%Re Thm'cple M -12 to 80mV Linear
5 W5%Re/W26%Re Thm'cple N N Thm'cple Nicrosil/NiSil
6 W5%Re/W26%Re Thm'cple P Platinel II Thm'cple
7 Pt10%Rh/Pt40%Rh Thm'cple R R Thm'cple Pt/Pt13%Rh
8 Exegen K80 I.R.Pyrometer S S Thm'cple Pt/Pt10%Rh
A 4 to 20mA Linear T T Thermocouple
B B Thm'cple Pt/Pt30%Rh -6%Rh V 1 to 10Vdc Linear
C *C Thm'cple W5%Re/W26%Re W 1 to 5Vdc Linear
D D Thm'cple W3%Re/W25%Re X Non Standard
E E Thermocouple Y 1 to 20mA Linear
F -100 to +100mV Linear Z RTD/PT100 DIN 43759
G 1 to 5Vdc Linear
MINIMUM RANGE * User defined range
19 | P a g e
MAXIMUM RANGE * User defined range DISPLAY UNITS C Centigrade K Kelvin
F Fahrenheit X Blank DIGITAL INPUT 1 XX Disabled ST One Shot Tune Enable
AM Manual Select AT Adaptive Tune Enable
SR Remote Setpoint Select FA Select Full Access Level
S2 Second Setpoint RB Up Button
EH Integral Hold LB Down Button
AC Alarm Acknowledge SB Scroll Button
PV Select PV2 PR Page Button
RP S'Pnt Rate Limit Enable B1 Least Significant BCD Digit
RN Run Program B2 2nd BCD Digit
HO Hold Program B3 3rd BCD Digit
RE Reset Program B4 4th BCD Digit
RH Run/Hold Program B5 5th BCD Digit
KL Keylock B6 Most Significant BCD Digit
NT Run/Reset SY Standby-All O/P'S OFF
TN Reset/Run SC Program Wait at end of Segment
HB Program Holdback Enable SG Skip Segment
P2 PID 2 Select AG Advance To End Of Segment DIGITAL INPUT 2 XX Disabled ST One Shot Tune Enable
AM Manual Select AT Adaptive Tune Enable
SR Remote Setpoint Select FA Select Full Access Level
S2 Second Setpoint RB Up Button
EH Integral Hold LB Down Button
AC Alarm Acknowledge SY Scroll Button
PV Select PV2 PR Page Button
RP S'Pnt Rate Limit Enable B1 Least Significant BCD Digit
RN Run Program B2 2nd BCD Digit
HO Hold Program B3 3rd BCD Digit
RE Reset Program B4 4th BCD Digit
RH Run/Hold Program B5 5th BCD Digit
KL Keylock B6 Most Significant BCD Digit
NT Run/Reset SY Standby-All O/P'S OFF
TN Reset/Run SC Program Wait at end of Segment
HB Program Holdback Enable SG Skip Segment
P2 PID 2 Select AG Advance To End Of Segment OPTIONS 1 XX None OPTIONS 2 XX None
DP Direct Acting PID Ctrl.
PD Power Feedback Disabled OPTIONS 3 XX None OPTIONS 4 XX None
CF Fan Cooling
MD Auto/Man Button Disabled
CW Water Cooling
RD Run/Hold Button Disabled
CL Oil Cooling
MR Auto/Man & Run/Hold Disabled
CO On/Off Cooling
OPTIONS 5 XX None HR Ramp Rate in Units/Hour
HD Dwell Time In Hours HT Dwell & Ramp in Hours
20 | P a g e
Single Loop Controllers - 2404 Series
Option Values Description Price Values Description Price
Model 2404 1/4th DIN Base Model
2404f Profibus Model $75
FUNCTION CC Controller $605 V4 VP/4-Programs $828
CG Single 8-Seg Program
$605 VM VP/20-Programs (not for 2404f)
$927
CP Single 16-Seg Program $776 NF On/Off Controller $605
P4 Four Programs (not for 2404f) $828 NG 1X8 Seg Programmer $605
CM 20 Programs $927 NP 1X16 Seg Programmer $776
VC Valve Positioner $605 N4 4X16 Seg Programmer $828
VG VP Single 8-Seg Program
$605 NM 20X16 Seg Programmer (not for 2404f)
$927
VP VP Single 16-Seg Program
$776 NS Carbon Control (see non-standard field) $366
SUPPLY VOLTAGE VH 85 to 264Vac $0 VL 19 to 29Vac/dc $65
MODULE 1 R2 Relay Fitted Unconfigured $61 H8 0 to 5V PID Heating Isolated $104
RH Relay PID Heating $61 H9 1 to 5V PID Heating Isolated $104
RU Valve Raise Output $61 HZ 0 to 10V PID Heating Isolated $104
R4 Form C Fitted Unconfigured $61 TL Fitted Unconfigured $104
YH Form C PID Heating $61 TP Fitted Unconfigured $104
FH High Alarm $61 TK Triple Contact I/P $104
FL Low Alarm $61 RR Dual Relay Fitted Unconfigured $114
DB Deviation Band Alarm $61 RD PID Heat and Cool $114
DL Deviation Low Alarm $61 RM VP Raise and Lower OP's $114
DH Deviation High Alarm $61 TT Dual Triac Fitted Unconfigured $114
L2 Logic Fitted Unconfigured $61 TD Triac PID Heat and Cool $114
LH PID Heating $61 TM VP Raise and Lower OP's $114
M1 PDSIO Mode 1 $61 LR Fitted Unconfigured $114
M2 PDSIO Mode 2 $61 LD logic+relay PID Heat & Cool $114
T2 Triac Fitted Unconfigured $61 LT Fitted Unconfigured $114
TH PID Heating $61 GD PID Heat and Cool $114
TU Valve Raise Output $61 XX None $0
D4 DC output Fitted Isolated $104 RP Valve Raise (With Profibus) $61
H6 0 to 20mA PID Heating Isolated $104 LO Isolated Logic Output $104
H7 4 to 20mA PID Heating Isolated $104
MODULE 2 R2
Relay Fitted Unconfigured $61 D6
Fitted Unconfigured (see note 1)
$104
RC Relay PID Cooling $61 XX None $0
RW Valve Lower Output $61 LO Isolated Logic Output $104
R4 Form C Fitted Unconfigured $61 D4 DC output Fitted Isolated $104
YC PID Cooling $61 C6 0 to 20mA PID Cooling Isolated $104
PO Program Output 1 $61 C7 4 to 20mA PID Cooling Isolated $104
PE Program End O/P $61 C8 0 to 5V PID Cooling Isolated $104
FH High Alarm 2 $61 C9 1 to 5V PID Cooling Isolated $104
21 | P a g e
FL Low Alarm 2 $61 CZ 0 to 10V PID Cooling Isolated $104
DB Deviation Band Alarm 2 $61 TL Fitted Unconfigured $104
DL Deviation Low Alarm 2 $61 TP Fitted Unconfigured $104
DH Deviation High Alarm 2 $61 TK Triple Contact I/P $104
RR Dual Relay Fitted Unconfigured $114 MS 24Vdc Transmitter PSU $104
PP Program Outputs 1 & 2 $114 VS VP Pot I/P Feedback $104
L2 Logic Fitted Unconfigured $61 VU VP Pot I/P Unconfigured $104
LC PID Cooling $61 VR VP Pot I/P Setpoint $104
T2 Fitted Unconfigured $61 TW Valve Lower Output $61
TC PID Cooling $61 RL Valve Lower (with Profibus)
MODULE 3 R2 Relay Fitted Unconfigured $61 TL Fitted Unconfigured $104
R4 Relay Fitted Unconfigured $61 TP Fitted Unconfigured $104
PO Program Output 4 $61 TK Triple Contact I/P $104
PE Program End O/P $61 MS 24Vdc Transmitter $104
FH High Alarm 3 $61 VS VP Pot I/P Feedback $104
FL Low Alarm 3 $61 VU VP Pot I/P Unconfigured $104
DB Deviation Band Alarm 3 $61 VR VP Pot I/P Setpoint $104
DL Deviation Low Alarm 3 $61 W2 4 to 20mA Setpoint $104
DH Deviation High Alarm 3 $61 W5 0 to 10V Setpoint $104
L2 Logic Fitted Unconfigured $61 D5 DC I/P UNCONF. $104
T2 Triac Fitted Unconfigured $61 WP Second PV I/P $104
D2 DC output Fitted non-Isolated
$76 D6 Retransmission output Isolated
$104
RR Dual Relay Fitted Unconfigured $114 XX None $0
PP Program Outputs 4 & 5 $114 LO Isolated Logic Output $104
ALARM RELAY RF Relay Fitted Unconfigured $32 LF PDSIO Load Failure $32
FH High Alarm $32 HF PDSIO Heater Failure $32
FL Low Alarm $32 SF PDSIO SSR Failure $32
DB Deviation Band Alarm $32 PO Program Output 6 $32
DL Deviation Low Alarm $32 PE Program End O/P $32
DH Deviation High Alarm $32 XX None $0
RA Rate of Change $32
COMMS 1 A2 RS232 Fitted Unconfigured $115 Y2 RS485 Fitted Unconfigured $115
AM RS232 Modbus Protocol $115 YM RS485 Modbus Protocol $115
AE RS232 EI Bisynch Protocol $115 YE RS485 EI Bisynch Protocol $115
F2 RS422 Fitted Unconfigured $115 XX None $0
FM RS422 Modbus Protocol $115 DN DeviceNet $155
FE RS422 EI Bisynch Protocol $115 M7 Fitted Unconfigured $95
PB Profibus Module (requires 2404F) $155
COMMS 2 M6 Fitted Unconfigured $95 TS Setpoint Retrans $95
RS Setpoint Input $95 OT Output Retrans $95
M7 Fitted Unconfigured $95 XX None $0
PT PV Retrans $95
MANUAL ENG English
NON-STANDARD ES0209 Zirconia for Carbon Control Requires Mod3 = D5 / Alarm Relay = RF $366
ES0288 Zirconia and Profibus Requires Comms = PB / Mod3 = D5 / Alarm Relay = RF $366
PRE CONFIGURATION
SENSOR INPUT 1 Ni/Ni18%Mo Thm'cple J J Thermocouple
2 Pt20%Rh/Pt40%Rh Thm'cple K K Thermocouple
3 W/W26%Re Thm'cple L L Thermocouple
4 W/W26%Re Thm'cple M -12 to 80mV Linear
5 W5%Re/W26%Re Thm'cple N N Thm'cple Nicrosil/NiSil
6 W5%Re/W26%Re Thm'cple P Platinel II Thm'cple
7 Pt10%Rh/Pt40%Rh Thm'cple R R Thm'cple Pt/Pt13%Rh
8 Exegen K80 I.R.Pyrometer S S Thm'cple Pt/Pt10%Rh
A 4 to 20mA Linear T T Thermocouple
B B Thm'cple Pt/Pt30%Rh -6%Rh V 1 to 10Vdc Linear
22 | P a g e
C *C Thm'cple W5%Re/W26%Re W 1 to 5Vdc Linear
D D Thm'cple W3%Re/W25%Re X Non Standard
E E Thermocouple Y 1 to 20mA Linear
F -100 to +100mV Linear Z RTD/PT100 DIN 43759
G 1 to 5Vdc Linear
MINIMUM RANGE * User defined range MAXIMUM RANGE * User defined range DISPLAY UNITS C Centigrade K Kelvin
F Fahrenheit X Blank DIGITAL INPUT 1 XX Disabled ST One Shot Tune Enable
AM Manual Select AT Adaptive Tune Enable
SR Remote Setpoint Select FA Select Full Access Level
S2 Second Setpoint RB Up Button
EH Integral Hold LB Down Button
AC Alarm Acknowledge SB Scroll Button
PV Select PV2 PR Page Button
RP S'Pnt Rate Limit Enable B1 Least Significant BCD Digit
RN Run Program B2 2nd BCD Digit
HO Hold Program B3 3rd BCD Digit
RE Reset Program B4 4th BCD Digit
RH Run/Hold Program B5 5th BCD Digit
KL Keylock B6 Most Significant BCD Digit
NT Run/Reset SY Standby-All O/P'S OFF
TN Reset/Run SC Program Wait at end of Segment
HB Program Holdback Enable SG Skip Segment
P2 PID 2 Select AG Advance To End Of Segment DIGITAL INPUT 2 XX Disabled ST One Shot Tune Enable
AM Manual Select AT Adaptive Tune Enable
SR Remote Setpoint Select FA Select Full Access Level
S2 Second Setpoint RB Up Button
EH Integral Hold LB Down Button
AC Alarm Acknowledge SY Scroll Button
PV Select PV2 PR Page Button
RP S'Pnt Rate Limit Enable B1 Least Significant BCD Digit
RN Run Program B2 2nd BCD Digit
HO Hold Program B3 3rd BCD Digit
RE Reset Program B4 4th BCD Digit
RH Run/Hold Program B5 5th BCD Digit
KL Keylock B6 Most Significant BCD Digit
NT Run/Reset SY Standby-All O/P'S OFF
TN Reset/Run SC Program Wait at end of Segment
HB Program Holdback Enable SG Skip Segment
P2 PID 2 Select AG Advance To End Of Segment OPTIONS 1 XX None OPTIONS 2 XX None
DP Direct Acting PID Ctrl.
PD Power Feedback Disabled OPTIONS 3 XX None OPTIONS 4 XX None
CF Fan Cooling
MD Auto/Man Button Disabled
CW Water Cooling
RD Run/Hold Button Disabled
CL Oil Cooling
MR Auto/Man & Run/Hold Disabled
CO On/Off Cooling
OPTIONS 5 XX None HR Ramp Rate in Units/Hour
HD Dwell Time In Hours HT Dwell & Ramp in Hours
23 | P a g e
2408i Universal Process Indicator
Option Values Value Descriptions Price
Model Options 2408I 1/8th DIN Horizontal Base Model
FUNCTION AL Indicator/Alarm Unit $503
AP Profibus Indicator/Alarm $562
DISPLAY COLOUR GN Green Display
RD Red Display
SUPPLY VOLTAGE VH 85-264Vac
VL 20-29V ac/dc $65
MODULE 1, 2 & 3 R4 Relay-Fitted Unconfigured $61
FH Relay Non Latched-High Alarm $61
FL Relay Non Latched-Low Alarm $61
DB Relay Non Latched-Dev.Band Alarm $61
DL Relay Non Latched-Dev.Low Alarm $61
DH Relay Non Latched-Dev.High Alarm $61
RA Relay Non Latch-Rate-of-Change Alarm $61
HA Relay Latched-High Alarm $61
LA Relay Latched-Lo Alarm $61
BD Relay Latched-Deviation Band Alarm $61
WD Relay Latched-Deviation Lo Alarm $61
AD Relay Latched-Deviation Hi Alarm $61
RT Relay Latched-Rate of Change Alarm $61
NW Relay Latched-New Alarm $61
V1 Process Value Retrans 0-20mA $104
V2 Process Value Retrans 4-20mA $104
V3 Process Value Retrans 0-5Vdc $104
V4 Process Value Retrans 1-5Vdc $104
V5 Process Value Retrans 0-10Vdc $104
S1 Setpoint retrans 0-20mA $104
S2 Setpoint retrans 4-20mA $104
S3 Setpoint retrans 0-5V $104
S4 Setpoint retrans 1-5V $104
S5 Setpoint retrans 0-10V $104
Z1 Error retransmission 0-20mA $104
D6 DC Retrans-Fitted Unconfigured $104
Z2 Error retransmission 4-20mA $104
Z3 Error retransmission 0-5Vdc $104
Z4 Error retransmission 1-5Vdc $104
Z5 Error retransmission 0-10Vdc $104
TL Triple Log I/P-Unconfigured $104
TK Triple Cont I/P-Unconfigured $104
TP Triple Log O/P-Unconfigured $104
RR Dual Relay-Fitted Unconfigured $104
MS 20mA Transmitter Supply $104
G3 Strain Gauge-5V Transd.Supply $61
G5 Strain Gauge-10V Transd.Supply $61
XX None
24 | P a g e
RELAY OUTPUT 1 RF Relay-Fitted Unconfigured STD
FH Relay Non Latched-High Alarm STD
FL Relay Non Latched-Low Alarm STD
DB Relay Non Latched-Dev Band Alarm STD
DL Relay Non Latched-Dev Low Alarm STD
DH Relay Non Latched-Dev High Alarm STD
RA Relay Non Latch-Rate-of-change Alarm STD
HA Relay Latched-High Alarm STD
LA Relay Latched-Low Alarm STD
BD Relay Latched-Dev Band Alarm STD
WD Relay Latched-Dev Low Alarm STD
AD Relay Latched-Dev High Alarm STD
RT Relay Latched-Rate Of Change Alarm STD
COMMUNICATIONS A2 RS232-Fitted Unconfigured $115
AM RS232-Modbus Protocol $115
AE RS232-EI Bisynch Protocol $115
F2 RS422-Fitted Unconfigured $115
FM RS422-Modbus Protocol $115
FE RS422-EI Bisynch Protocol $115
Y2 RS485-Fitted Unconfigured $115
YM RS485-Modbus Protocol $115
YE RS485-EI Bisynch Protocol $115
PB Profibus High Speed 485 Comms $155
XX None
DN Devicenet Communications $155
MANUAL ENG English
*See next page for option config code
25 | P a g e
2408i Optional Configuration Code
SENSOR INPUT 1 Ni/Ni18%Mo Thm'cple J J Thermocouple
2 Pt20%Rh/Pt40%Rh Thm'cple K K Thermocouple
3 W/W26%Re Thm'cple L L Thermocouple
4 W/W26%Re Thm'cple M -12 to 80mV Linear
5 W5%Re/W26%Re Thm'cple N N Thm'cple Nicrosil/NiSil
6 W5%Re/W26%Re Thm'cple P Platinel II Thm'cple
7 Pt10%Rh/Pt40%Rh Thm'cple R R Thm'cple Pt/Pt13%Rh
8 Exegen K80 I.R.Pyrometer S S Thm'cple Pt/Pt10%Rh
A 4 to 20mA Linear T T Thermocouple
B B Thm'cple Pt/Pt30%Rh -6%Rh V 1 to 10Vdc Linear
C *C Thm'cple W5%Re/W26%Re W 1 to 5Vdc Linear
D D Thm'cple W3%Re/W25%Re X Non Standard
E E Thermocouple Y 1 to 20mA Linear
F -100 to +100mV Linear Z RTD/PT100 DIN 43759
MINIMUM RANGE * User defined range
MAXIMUM RANGE * User defined range
DISPLAY UNITS C Centigrade K Kelvin
F Fahrenheit X Blank
DIGITAL I/P 1 XX Disabled J1 Tare Correct Strain Gauge 1
AC Alarm Acknowledge J2 Tare Correct Strain Gauge 2
KL Keylock J3 Auto Calibration Strain Gauge1
SR Remote Setpoint Input J4 Auto Calibration Strain Gauge2
PV Select Process Value I/P 2
DIGITAL I/P 2 XX Disabled J1 Tare Correct Strain Gauge 1
AC Alarm Acknowledge J2 Tare Correct Strain Gauge 2
KL Keylock J3 Auto Calibration Strain Gauge1
SR Remote Setpoint Input J4 Auto Calibration Strain Gauge2
PV Select Process Value I/P 2 M3 CTX Mode 4
SENSOR INPUT J Default Configuration 3 Pt20%Rh/Pt40%Rh Thm'cple
K J Thermocouple 4 W/W26%Re Thm'cple
T K Thermocouple 5 W/W26%Re Thm'cple
L T Thermocouple 6 W5%Re/W26%Re Thm'cple
N L Thermocouple 7 W5%Re/W26%Re Thm'cple
R N Thm'cple Nicrosil/NiSil 8 Pt10%Rh/Pt40%Rh Thm'cple
S R Thm'cple Pt/Pt13%Rh M Exegen K80 I.R.Pyrometer
B S Thm'cple Pt/Pt10%Rh F -12 to 80mV Linear
P B Thm'cple Pt/Pt30%Rh -6%Rh Y -100 to 100mV Linear
C Platinel II Thm'cple A 0 to 20mA Linear
Z *C Thm'cple W5%Re/W26%Re W 4 to 20mA Linear
D RTD/PT100 DIN 43760 G 0 to 5Vdc Linear
E D Thm'cple W3%Re/W25%Re V 1 to 5Vdc Linear
1 E Thermocouple X 1 to 10Vdc Linear
2 Ni/Ni18%Mo Thm'cple
I/P 2 FUNCTION XX Default Config FN Proc Value=Highest of IP1 &IP1
LO No Func.IP for Monitor & Alarm RS Proc Value Derived from IP1 &1
HI Proc Value=Lowest of IP1 & IP2
26 | P a g e
RANGE MINIMUM * User defined range
RANGE MAXIMUM * User defined range
OPTIONS XX None Specified SG Strain Gauge config
MP Melt Pressure, sensor config
27 | P a g e
SUB24 Spare Parts and Accessories
Option Description Values Value Descriptions Price
SUB24 BEZ2416 BEZEL 2416 $36
SUB24 BEZ2408 BEZEL 2408 $43
SUB24 BEZ408F BEZEL 2408F $43
SUB24 BEZ408I BEZEL 2408I $43
SUB24 BEZ2404 BEZEL 2404 $56
SUB24 BEZ404F BEZEL 2404F $56
SUB24 SLE2416 SLEEVE 2416 $85
SUB24 SLE2408 SLEEVE 2408 $111
SUB24 SLE408F SLEEVE 2408F $111
SUB24 SLE408I SLEEVE 2408I $110
SUB24 SLE2404 SLEEVE 2404 $126
SUB24 SLE404F SLEEVE 2404F $126
SUB24 DB2404 DISPLAY/BEZEL 2404 $167
SUB24 DB2408 DISPLAY/BEZEL 2408 $133
SUB24 DB408IG DISPLAY/BEZEL 2408I GREEN $195
SUB24 DB408IR DISPLAY/BEZEL 2408I RED $195
SUB24 DB2408F DISPLAY/BEZEL 2408F $43
SUB24 DB2416 DISPLAY/BEZEL 2416 $146
SUB24 DISP16 2416 DISPLAY BOARD $120
SUB24 DISP08 2408 DISPLAY BOARD $197
SUB24 DISP04 2404 DISPLAY BOARD $136
SUB24 DISP8IG 2408I DISPLAY GREEN $172
SUB24 DISP8IR 2408i DISPLAY RED $170
SUB24 PROF9PIND Profibus 9pin Comms Adaptor $37
SUB24 D2 DC O/P NON-ISOLATED 2416 $76
SUB24 D4 DC O/P ISOLATED 240X $104
SUB24 D5 DC I/P UNCONFIGURED 24XX $104
SUB24 D6 DC RETRANSMISSION UNCONFIGURED 24XX $104
SUB24 G3 Transducer PSU 5V $61
SUB24 G5 Transducer PSU 10V $61
SUB24 MS TRANSMITTER PSU $104
SUB24 EIA232 EIA232 COMMS 24XX $115
SUB24 EIA422 EIA422 COMMS 24XX $115
SUB24 EIA485 EIA485 COMMS 24XX $115
SUB24 DN DEVICENET $155
SUB24 PB PROFIBUS COMMS 24XX $155
SUB24 LO SINGLE LOGIC $104
SUB24 L2 LOG/PDSIO O/P NON-ISOL 24XX $61
SUB24 LR DUAL LOG/REL O/P 24XX $114
SUB24 LT DUAL LOG/TRC O/P 24XX $114
SUB24 RR DUAL REL/REL O/P 24XX $114
SUB24 TT DUAL TRIAC/TRIAC O/P 24XX $114
SUB24 M6 PDSIO I/P UNCONF $95
SUB24 M7 PDSIO O/P UNCONF $95
SUB24 R2 RELAY 2 PIN 24XX $61
SUB24 R4 RELAY CHANGEOVER 24XX $61
SUB24 T2 TRIAC O/P 24XX $61
SUB24 TK TRIPLE CONTACT I/P 24XX $104
SUB24 TL TRIPLE LOGIC I/P 24XX $104
SUB24 TP TRIPLE LOGIC O/P 24XX $104
SUB24 VU Potentiometer I/P Unconf $104
SUB24 2R49.1 2R49 1% SENSE RESISTOR $12
28 | P a g e
Multi-Loop Controllers - 2604/2704
Option Values Value Descriptions Price
Model Options 2604 1/4th DIN Base Code $1,155
2604f 1/4th DIN Base with Profibus $1,232
2704 1/4th DIN Base Code $1,760
2704f 1/4th DIN Base with Profibus $1,837
SUPPLY VOLTAGE VH 85 - 264 Vac
VL 20 - 29 Vac/dc $65
LOOPS 1 One PID Control Loop
2 Two PID Control Loops $206
3 Three PID Control Loops $412
PROGRAMS X No Program
2 Twenty Setpoint Programs
5 Fifty Setpoint Programs $90
A Asynchronous Programs $90
PROFILE X No Profile
1 One Profile *SEE NOTE 1 $117
2 Two Profiles *SEE NOTE 1 $233
3 Three Profiles *SEE NOTE 1 $350
APPLICATIONS XX Standard
ZC Zirconia Function Block $554
V1 Vacuum Function Block (1 gauge) $333
V3 Vaccum Function Block (3 gauge) $656
BC Boiler Function Block $554
I/O SLOT 1, 3, 4, 5, 6 XX None Fitted
R4 Change Over Relay $61
R2 2 Pin Relay $61
RR Dual Relay $114
T2 Triac $61
TT Dual Triac $114
D4 DC Control $104
D6 DC Retransmission $104
TL Triple Logic Input $104
TK Triple Contact Input $104
TP Triple Logic Output $104
VU Potentiometer Input $104
MS 24Vdc Transmitter PSU $104
G3 5Vdc Transducer PSU $61
29 | P a g e
G5 10Vdc Transducer PSU $61
DO Dual DC Output $156
PV Precision Input (Slot 3 and 6 only) $150
DP Dual DC input (Slot 3 and 6 only) $150
AM Analog Input $104
LO Isolated Single Logic $104
HR Hi Res DC Retransmission/24V PSU $104
TD TDS conductivity input $150
PH 4W PRT INPUT (100R) (Slot 4 or 6 only) $295
PL 4W PRT INPUT (25.5R) (Slot 4 or 6 only) $295
MEMORY MODULE XX Not Fitted H COMMS SLOT XX None Fitted
A2 EIA-232 Modbus Communications $115
Y2 2 Wire EIA-485 Modbus Communications $115
F2 4 Wire EIA-485 Modbus Communications $115
PB Profibus Communications requires 2604f or 2704f $155
AE RS232 EI-Bisync Communications $162
YE 2 wire RS485 Bisync Communications $162
FE 4 wire RS485 Bisync Communications $162
DN Devicenet Communications $155
ET 10 Ethernet modbus TCPIP (2704 only) $285
J COMMS SLOT XX None Fitted
A2 EIA-232 Modbus Communications $115
Y2 2 Wire EIA-485 Modbus Communications $115
F2 4 Wire EIA-485 Modbus Communications $115
M1 RS232 Modbus Master Communications $115
M2 2 wire RS485 master Modbus Master Communications $115
M3 4 wire RS485 master Modbus Master Communications $115
MANUAL XXX No Manual TOOLKIT FUNCTIONS XX None
U1 Function Block Toolkit Level 1 $175
U2 Function Block Toolkit Level 2 $225
Note 1) If selecting programs, match the number of profiles to the number of loops in
the instrument.
30 | P a g e
2604/2704 Additional Configuration
Loop 1, 2 & 3 Function Slot Function
S - Standard PID PID - PID Control XXX Unconfigured
Single DC outputs
C - Cascade ONF - On/Off Control 1-- Loop no. 1 -H- PID Heat
R - Ratio PIF - PID/On-Off Control 2-- Loop no. 2 -C- PID Cool
O - Override VP1 - Valve Pos w/out Feedback 3-- Loop no. 3 -T- PV retransmission
VP2 - Valve Pos w/ Feedback
Single relay, triac, logic -S- SP retransmission
Analog Input Function -HX Heat
For output range select third digit
P2 - PV Loop 2 A - 4-20Ma -CX Cool
from table 1
P3 - PV Loop 3 Y - 0-20Ma
Dual relay or triac
Precision PV input
S1 - SP Loop 1 W - 0-5vDC -HC PID Heat & Cool -PV PV input module
S2 - SP Loop 2 G - 1-5vDC -VH VP Heat -PA Aux PV input (8)
S3 - SP Loop 3 V - 0-10vDC -AA FSH & FSH -PL Ratio lead input
A1 - AUX PV 1
-AB FSH & FSL
Analog input
A2 - AUX PV 2
-AC DH & DL -R- Setpoint
A3 - AUX PV 3
-AD FSH & DH
For input range select third digit
L1 - Ratio PV 1
-AE FSL & DL
from table 1
L2 - Ratio PV 2
-AF FSL & FSL
Aux. & lead PV inputs
L3 - Ratio PV 3
-AG FSH & DB -L- Ratio lead input
Process Inputs -AH FSL & DB -B- Aux. PV input
X None -AJ DB & DB
For input range select third digit
J J Thermocouple HHX Heat output for loops 1 & 2
from table 1
K K Thermocouple CCX Cool OP’s loops 1 & 2
Potentiometer input
T T Thermocouple P12 Prog events 1 & 2 -VF VP Heat feedback
L L Thermocouple P34 Prog events 3 & 4 -RS Remote SP
N N Thermocouple P56 Prog events 5 & 6
Dual DC 4-20mA/24Vdc
R R Thermocouple P78 Prog events 7 & 8
PSU Output
S S Thermocouple
Triple logic output HHX Heat output for loops 1 & 2
B B Thermocouple -HX CH1 Heat -HC Heat Cool
P P Thermocouple -CX CH1 Cool -HT CH1 Heat, Ch 2 PSU
C C Thermocouple -HC CH 1 Heat, CH2 Cool TTX Both channels PSU
Z RTD/PT100 HHX Heat output for loops 1 & 2
High Resolution DC Output
A 4-20mA Linear HHH Heat output for loops 1, 2 & 3 -TA 4-20mA PV Retrans
Y 0-20mA Linear
-TV 0-10V PV Retrans
V 0-10Vdc Linear
-SA 4-20mA SP Retrans
W 0-5Vdc Linear
-SV 0-10V SP Retrans
G 1-5Vdc Linear Q Custom Curve D D Thermocouple E E Thermocouple 1 Ni/Ni18%Mo 2 Pt20%Rh/Pt40%Rh 3 W/W26%Re(ENG) 4 W/W26%Re(HOS) 5 W5%Re/W26%Re(ENG) 6 W5%Re/W26%Re(HOS) 7 Pt10%Rh/Pt40%Rh
31 | P a g e
2604/2704MP Melt Pressure Controller
Option Values Value Descriptions Price
Model Options 2604MP 2604 Melt Pressure Application $1,462
2604MPf 2604 Melt Pressure Application with Profibus $1,543
2704MP 2704 Melt Pressure Application $2,062
2704MPf 2704 Melt Pressure Application with Profibus $2,137
SUPPLY VOLTAGE VH 85 - 264 Vac
VL 20 - 29 Vac/dc $65
PRESSURE INPUTS 1 1 input
2 2 inputs $175
INPUT 1 mV ELEC LOW * *user select
INPUT 1 mV ELEC HIGH * *user select
INPUT 1 ENG LOW * *user select
INPUT 1 ENG HIGH * *user select
INPUT UNITS PSI PSI units
BAR Bar units
INPUT 2 mV ELEC LOW * *user select
INPUT 2 mV ELEC HIGH * *user select
INPUT 2 ENG LOW * *user select
INPUT 2 ENG HIGH * *user select
INPUT UNITS PSI PSI units
BAR Bar units
CONTROL OUTPUT 4mA20 4-20mA
0mA20 0-20mA
0V10 0-10Vdc
1V5 1-5Vdc
0V5 0-5Vdc
H COMMS SLOT XX None Fitted
A2 EIA-232 Modbus Communications $115
Y2 2 Wire EIA-485 Modbus Communications $115
F2 4 Wire EIA-485 Modbus Communications $115
PB Profibus Communications $155
AE RS232 EI-Bisync Communications $162
YE 2 wire RS485 Bisync Communications $162
FE 4 wire RS485 Bisync Communications $162
DN Devicenet Communications $155
ET 10 Ethernet modbus TCPIP (2704 only) $285
J COMMS SLOT XX None Fitted
A2 EIA-232 Modbus Communications $115
Y2 2 Wire EIA-485 Modbus Communications $115
F2 4 Wire EIA-485 Modbus Communications $115
M1 RS232 Modbus Master Communications $115
M2 2 wire RS485 master Modbus Master Communications $115
32 | P a g e
M3 4 wire RS485 master Modbus Master Communications $115
MANUAL XXX No Manual
TOOLKIT FUNCTIONS XX None
U1 Function Block Toolkit Level 1 $175
U2 Function Block Toolkit Level 2 $225
WARRANTY XXXXX Standard
33 | P a g e
2704VC Vacuum Furnace Controller
Option Values Value Descriptions Price
Model Options 2704VC Base Model $3,080
SUPPLY VOLTAGE VH 85 - 264 Vac
VL 20 - 29 Vac/dc $65
CONTROLLER FUNCTION VXX Vacuum only
VTX Vacuum/temp $415
FURNACE CONTROL K Type K Thermocouple
AND LOAD TEMP SENSOR N Type N Thermocouple
R Type R Thermocouple
S Type S Thermocouple
B Type B Thermocouple
Z RTD/Pt100
D D Thermocouple
E E Thermocouple
1 Ni/Ni 18%Mo
2 Pt20%Rh/Pt40%Rh
3 W/W2+%Re(Eng)
4 W/W26%(Hos)
5 W5%Re/W26%Re(eng)
6 W5%rE/W26%Re(Hos)
7 Pt10%Rh/Pt40%Re
Q Custom Curve
X Unconfigured
C Type C Thermocouple
CONTROL OUTPUT 4mA20 4-20mA
0mA20 0-20mA
0V10 0-10Vdc
1V5 1-5Vdc
0V5 0-5Vdc
HI / LOW / FORELINE VACUUM IP V000 Edwards AIM-S
V020 Edwards APG-M
V030 Edwards APG-L
V060 Edwards PRM10
V110 Pfeiffer TPR 265
V120 Pfeiffer IKR 265
V130 Pfeiffer PKR 265
V200 Leybold ITR 100D
V210 Leybold TTR211/216
V220 Leybold PTR225/227
V230 Leybold TR090
34 | P a g e
V240 Leybold IR090
V300 Varian mini BA-IMG
V310 Varian ConvecTorr
Q000 Custom Curve
H COMMS SLOT XX None Fitted
A2 EIA-232 Modbus Communications $115
Y2 2 Wire EIA-485 Modbus Communications $115
F2 4 Wire EIA-485 Modbus Communications $115
PB Profibus Communications $155
AE RS232 EI-Bisync Communications $162
YE 2 wire RS485 Bisync Communications $162
FE 4 wire RS485 Bisync Communications $162
DN Devicenet Communications $155
ET 10 Ethernet modbus TCPIP (2704 only) $285
J COMMS SLOT XX None Fitted
A2 EIA-232 Modbus Communications $115
Y2 2 Wire EIA-485 Modbus Communications $115
F2 4 Wire EIA-485 Modbus Communications $115
M1 RS232 Modbus Master Communications $115
M2 2 wire RS485 master Modbus Master Communications $115
M3 4 wire RS485 master Modbus Master Communications $115
TOOLKIT FUNCTIONS XX None
U1 Function Block Toolkit Level 1 $175
U2 Function Block Toolkit Level 2 $225
MANUAL XXX No Manual
WARRANTY NONE Standard
35 | P a g e
2604/2704CP Atmosphere Controller
Option Values Value Descriptions Price
Model Options 2604CP 2604 Carbon Controller Base Model $1,789
2604CPf 2604 Carbon Controller with Profibus $1,859
2704CP 2704 Carbon Controller Base Model $2,346
2704CPf 2704 Carbon Controller with Profibus $2,421
SUPPLY VOLTAGE VH 85 - 264 Vac
VL 20 - 29 Vac/dc $65
CONTROLLER FUNCTION CXX Carbon Controller
DXX Dewpoint Controller
OXX Oxygen Controller
DTX Dewpoint/Temp Controller $207
CTX Carbon/Temp Controller $207
OTX Oxygen/Temp Controller $207
CTP Carbon/Temp Programmer $427
DTP Dewpoint/Temp Programmer $427
OTP Oxygen/Temp Programmer $427
FURNACE TC X Unconfigured
K Type K
N Type N
R Type R
S Type S
B Type B
TEMP CONTROL OUTPUT XX Not Fitted
TP Time Proportioning
VP Valve Position
OF ON/OFF
4mA20 4-20mA
0mA20 0-20mA
0V10 0-10Vdc
0V5 0-5Vdc
1V5 1-5Vdc
ZIRCONIA PROBE INPUT MV Probe Millivolts
DP Dewpoint
OX % Oxygen
OP PPM Oxygen
BC Barber Colman
DR Drayton
MC MMI Carbon
MD MMI Dewpoint
36 | P a g e
AC Accucarb
SS SSI
MD MacDhui
AA AACC
BH Bosch Carbon
BO Bosch Oxygen
MI MacDhui
FURNACE TC X Unconfigured
K Type K Thermocouple
N Type N Thermocouple
R Type R Thermocouple
S Type S Thermocouple
B Type B Thermocouple
GAS CONTROL OUTPUT TP Time Proportioning
OF ON/OFF
ZIRCONIA RETRANSMISSION XX Not Fitted
4mA20 4-20mA $104
0mA20 0-20mA $104
1V5 1-5Vdc $104
0V10 0-10Vdc $104
0V5 0-5Vdc $104
CO ANALYSER INPUT XX Not Fitted
4mA20 4-20mA
0mA20 0-20mA
0V10 0-10Vdc
0V5 0-5Vdc
1V5 1-5Vdc
H COMMS SLOT XX None Fitted
A2 EIA-232 Modbus $115
Y2 2 Wire EIA-485 Modbus $115
F2 4 Wire EIA-485 Modbus $115
PB Profibus $155
AE 232 Bisync $162
YE 2 wire 485 Bisync $162
FE 4 wire 485 Bisync $162
DN Devicenet $155
ET 10 Ethernet modbus TCPIP (2704 only) $285
J COMMS SLOT XX None Fitted
A2 EIA-232 $115
Y2 2 Wire EIA-485 $115
F2 4 Wire EIA-485 $115
M1 232 master $115
M2 2 wire 485 master $115
M3 4 wire 485 master $115
TOOLKIT FUNCTIONS XX None
U1 Toolkit Level 1 $175
U2 Toolkit Level 2 $225
MANUAL XXX No Manual Supplied
37 | P a g e
2604 Auto Responder Upgrades
Option Values Value Descriptions Price
Model Options 2604UPG Base Model
LOOPS 2 none to 2 loops $206
3 none to 3 loops $412
4 1 to 2 loops $206
5 1 to 3 loops $412
6 2 to 3 loops $206
X1 1 to none loops
X2 2 to none loops
X3 3 to none loops
X4 2 to 1 loops
X5 3 to 1 loops
X6 3 to 2 loops
XX no change
PROGRAMMER SETPOINTS 1 none to 1 setpoints $117
2 none to 2 setpoints $233
3 none to 3 setpoints $350
4 1 to 2 setpoints $117
5 1 to 3 setpoints $233
6 2 to 3 setpoints $117
X1 1 to none setpoints
X2 2 to none setpoints
X3 3 to none setpoints
X4 2 to 1 setpoints
X5 3 to 1 setpoints
X6 3 to 2 setpoints
XX no change
PROGRAMS 2 none to 50 $90
3 20 to 50 $90
X1 20 to none
X2 50 to none
X3 50 to 20
XX no change
TOOLKIT BLOCKS U1 none to level 1 $175
U2 none to level 2 $225
U3 level 1 to level 2 $50
X1 level 1 to none
X2 level 2 to none
X3 level 2 to 1
XX no change
VACUUM BLOCK XX no change
ZIRCONIA FUNCTION ZC None to enabled $554
XC enabled to none
XX no change
SPECIAL FEATURES EE0430 Bisynch protocol enabled $130
EE0471 OEM Security $130
EE0498 Modbus Map $130
XE0430 No Bisynch Protocol
XE0471 No OEM Security
XE0498 No Modbus map
XX no change
38 | P a g e
2704 Auto Responder Upgrades
Option Values Value Descriptions Price
Model Options 2704UPG Base Model LOOPS 2 none to 2 loops $206
3 none to 3 loops $412
4 1 to 2 loops $206
5 1 to 3 loops $412
6 2 to 3 loops $206
X4 2 to 1 loops
X5 3 to 1 loops
X6 3 to 2 loops
XX no change
PROGRAMMER SETPOINTS 1 none to 1 setpoints $117
2 none to 2 setpoints $233
3 none to 3 setpoints $350
4 1 to 2 setpoints $233
5 1 to 3 setpoints $233
6 2 to 3 setpoints $117
X4 2 to 1 setpoints
X5 3 to 1 setpoints
X6 3 to 2 setpoints
XX no change
PROGRAMS 2 none to 50 $90
3 20 to 50 $90
X1 20 to none
X2 50 to none
X3 50 to 20
XX no change
TOOLKIT BLOCKS U1 none to level 1 $175
U2 none to level 2 $225
U3 level 1 to level 2 $50
X1 level 1 to none
X2 level 2 to none
X3 level 2 to 1
XX no change
VACUUM BLOCK V1 none to 1 gauge $333
V2 none to 3 gauges $656
V3 1 to 3 gauges $323
X1 1 to none gauge
X2 3 to none gauges
X3 3 to 1 gauges
XX no change
ZIRCONIA FUNCTION ZC None to enabled $554
XX no change
SPECIAL FEATURES EE0430 Bisynch protocol enabled $130
EE0471 OEM Security $130
EE0498 Modbus Map $130
XE0430 No Bisynch Protocol
XE0471 No OEM Security
XE0498 No Modbus map
39 | P a g e
SUB26/27
Option Values Value Descriptions Price
SUB26 AM Analogue IP Module $104
SUB26 PV PV Input Module $150
SUB26 DP Dual DC (probe) Input $150
SUB26 VU Potentiometer I/P Unconf $104
SUB26 D4 DC Output Isolated $104
SUB26 DO Dual DC Output Module $156
SUB26 D6 DC Retransmission $104
SUB26 HR Hi Res DC retrans 24V PSU $156
SUB26 MS 24V Transmitter PSU $104
SUB26 G3 Transducer PSU 5V $61
SUB26 G5 Transducer PSU 10V $61
SUB26 R2 RELAY 2 PIN $61
SUB26 R4 RELAY CHANGEOVER $61
SUB26 RR DUAL RELAY OUTPUT $114
SUB26 T2 TRIAC OUTPUT $61
SUB26 TT DUAL TRIAC OUTPUT $114
SUB26 LO SINGLE LOGIC OUTPUT $104
SUB26 TL TRIPLE LOGIC INPUT $104
SUB26 TP TRIPLE LOGIC OUTPUT $104
SUB26 TK TRIPLE CONTACT INPUT $104
SUB26 EIA232 EIA232 COMMUNICATIONS $115
SUB26 EIA422 EIA422 COMMUNICATIONS $115
SUB26 EIA485 EIA485 COMMUNICATIONS $115
SUB26 PB PROFIBUS COMMUNICATIONS $155
SUB26 PROF9PIND Profibus 9 pin Comms Adaptor $37
SUB26 DN DEVICENET COMMUNICATIONS $155
SUB26 100R.1 100R 0.1% SENSE RESISTOR $13
SUB26 BEZ2604 BEZEL 2604 $65
SUB27 BEZ2704 BEZEL 2704 $65
SUB26 DB2604 DISPLAY/BEZEL 2604 $338
SUB27 DB2704 DISPLAY/BEZEL 2704 $338
SUB26 SLE2604 SLEEVE 2604 $126
SUB27 SLE2704 SLEEVE 2704 $126
SUB26 2R49.1 2R49 0.1% SENSE RESISTOR $12
40 | P a g e
Single Loop Controllers - 3216
Option Values Value Descriptions Price
Model Options 3216 Base Model
UNIT TYPE CC PID Controller Model $213
CP PID Controller with One 8 Segment Programmer $297
VC Motorised Valve Position Controller $213
VP Motorised Valve Position with One 8 Segment Programmer $297
SUPPLY VOLTAGE VH 85 - 264 Vac
VL 20 - 29 Vac/dc $61
INPUT/OUTPUT OP1 & OP3 LL Logic ip/op + logic o/p $48
LR Logic ip/op + relay (form A) $48
RR Relay (form A) + relay (Form A $48
LD Logic or Dig in 1/0-20mA $65
DR 0-20mA/Relay $65
DD 0-20mA/0-20mA $78
TT Triac/Triac $48
LT Logic/Triac $48
RC Relay/Isolated DC $65
LC Logic/Isolated DC $65
DC 0-20mA/Isolated DC $90
OUTPUT 3 XX Default
AA RELAY (OP4) X Not Fitted
R Relay (Form C) $21
OPTION BOARD XXX Not Fitted
4CL RS485 Modbus communications, CT and logic input $117
2CL RS232 Modbus communications, CT and logic input $117
XXL Logic Input $35
XCL CT and logic input $55
4XL RS485 Modbus Communications (2 wire) $115
2XL RS232 Modbus Communications (2 wire) $115
6XX 4 Wire RS485 Modbus Communications $115
RCL Remote setpoint input + Logic IP $99
FASCIA COLOUR G Eurotherm Green
S Silver
PRODUCT LANGUAGE ENG English
MANUAL LANGUAGE ENG English
EXTENDED WARRANTY XXXXX Standard
CERTIFICATES XXXXX No certificate
41 | P a g e
QUICK START INPUT TYPE B type B T type T
J type J C custom/type C
K type K P pt100
L type L M 0-50mV
N type N 2 0-20mA
R type R 4 4-20mA
S type S X Unconfigured
QUICK START SETPOINT LIMITS C deg C full range 9 0 to 1800 Deg C
F deg F full range G 32 to 212 Deg F
0 0 to 100 Deg C H 32 to 392 Deg F
1 0 to 200 Deg C J 32 to 752 Deg F
2 0 to 400 Deg C K 32 to 1112 Deg F
3 0 to 600 Deg C L 32 to 1472 Deg F
4 0 to 800 Deg C M 32 to 1832 Deg F
5 0 to 1000 Deg C N 32 to 2192 Deg F
6 0 to 1200 Deg C P 32 to 2552 Deg F
7 0 to 1400 Deg C R 32 to 2912 Deg F
8 0 to 1600 Deg C T 32 to 3272 Deg F
QUICK START INPUT/OUTPUT 1 X Not fitted W acknowledge alarm
and H heat (PID) P setpoint 2
QUICK START OUTPUT 2 (OP2) C cool (PID) T reset
J heat (on/off) D Retrans setpoint 4-20ma
K cool (on/off) E Retrans value 4-20mA
0 high alarm F Retrans output 4-20mA
1 low alarm N Retrans setpoint 0-20mA
2 deviation high Y Retrans value 0-20mA
3 deviation low F Retrans output 0-20mA
4 deviation band A remote UP button
5 inverted high alarm B remote DOWN button
6 inverted low alarm G timer/prog run/reset
7 inverted deviation high I timer/prog hold
8 inverted deviation low Q standby select
9 inverted deviation band R Run/Hold
L key lock Z Retrans output 0-20mA
M manual U Remote SP enable
QUICK START OUTPUT A (OP4) X not fitted 3 deviation low
H heat (PID) 4 deviation band
C cool (PID) 5 high alarm
J heat (on/off) 6 low alarm
K cool (on/off) 7 inverted deviation high
0 high alarm 8 inverted deviation low
1 low alarm 9 inverted deviation band
2 deviation high
QUICK START 2 INPUT CT SCALED X not fitted 5 50 amps
1 10 amps 6 100 amps
2 25 amps
QUICK START 2 INPUT LOGIC X not fitted U remote SP enable
L key lock V recipe 2 / 1 select
M manual M A remote UP button
R run/hold B remote DOWN button
W acknowledge alarm G timer/prog run/reset
P setpoint 2 I timer/prog hold
T reset
QUICK START 2 LOWER DISPLAY T set point 1 AL1 setpoint
P output power % A amps
R time to run N none
E elapsed time D Dwell/Ramp - Time/Target
42 | P a g e
Single Loop Controllers – 3208, 32h8, & 3204
Field Values Value Descriptions Price
Model 3208 1/8th DIN PID Controller
32h8 1/8th DIN Horizontal PID Controller
3204 1/4th DIN PID Controller
UNIT TYPE CC PID control $338
CP PID with Single 8 Segment Programmer $422
VC Motorized Valve Position Control $338
VP Motorized Valve Position Programmer $422
SUPPLY VOLTAGE VH 85 - 264 Vac
VL 20 - 29 Vac/dc $61
OUTPUT OPTIONS 1, 2, 3 LRRX logic/relay/relay $72
RRRX relay/relay/relay $72
LLRX logic/logic/relay $72
LRDX logic/relay/0-20mA $82
RRDX relay/relay/0-20mA $82
DDDX 0-20mA/0-20mA/0-20mA $96
DRDX 0-20mA/Relay/0-20mA $96
LTRX Logic/Triac/Relay $72
TTRX Triac/Triac/Relay $72
LTDX Logic/Triac/0-20mA $82
TTDX Triac/Triac/0-20mA $82
LLDX Logic/logic/0-20mA $81
LDDX logic/0-20ma/0-20mA $96
AA RELAY (OP4) X Not Fitted $0
R Relay (Form C) $21
OPTION BOARD XXX Not Fitted $0
4CL RS485 Modbus comms, CT and logic input $117
2CL RS232 Modbus comms, CT and logic input $117
XCL CT and logic input $56
XXL Logic Input $56
2XL RS232 Modbus Comms + Logic IP $115
4XL 2 Wire RS485 Modbus Comms + Logic IP $115
RCL Remote setpoint + Logic IP $99
FASCIA COLOUR G Eurotherm Green $0
PRODUCT LANGUAGE ENG English
MANUAL LANGUAGE ENG English
43 | P a g e
3200 Series Single Loop Controller Upgrades
Option Values Value Descriptions Price
Model Options 3204UPG Base Model
FUNCTION X No Change
AA RELAY R AA Relay $21
PROGRAMMER X No Change
1 Enable $81
Model Options 3208UPG Base Model
FUNCTION X No Change
AA RELAY R AA Relay $21
PROGRAMMER X No Change
1 Enable $81
Model Options 3216UPG Base Model
FUNCTION X No Change
AA RELAY R AA Relay $21
PROGRAMMER X No Change
1 Enable $81
44 | P a g e
3200i Series Limit Alarm and Indicator Unit
Option Values Value Descriptions Price
Model Options 3216I 1/6th DIN Indicator $213
32h8I 1/8th DIN Horizontal Indicator $324
3204I 1/4th DIN Indicator $335
FUNCTION AL Standard Alarm Unit
FM FM Alarm Unit $63
SG Strain Gauge Input (32h8i only) $128
SUPPLY VOLTAGE VH 85 - 264 Vac
VL 20 - 29 Vac/dc $65
OUTPUTS 1 2 AND 3 LRXX Logic/Relay (3216i) $48
RRXX Relay/Relay (3216i) $48
DRXX DC/Relay (3216i) $65
LDXX Logic/DC (3216i) $65
RXXX Relay Only (32h8i, 3204i) $56
RXDX Relay/DC (32h8i, 3204i) $76
AA RELAY R Relay (form C) OPTIONS XXL Digital Input A $56
2XL RS232 Modbus Comms & Logic input $117
2XX RS232 Modbus Comms $117
4XL RS485 Modbus Comms & Logic input $117
4XX RS485 Modbus Comms $117
XXX None
FASCIA COLOUR G Green PRODUCT LANGUAGE ENG English MANUAL LANGUAGE ENG English INPUT ADAPTOR XX None
V1 0-10Vdc Input Adaptor $36
A1 mA burden resistor (2.49R,0.1%) $12
EXTENDED WARRANTY XXXXX Standard Warranty CERTIFICATES XXXXX No certificate
*Quickstart codes next page
45 | P a g e
3200i Series Quickstart Codes
SET 1 : INPUT TYPE B No Quick Start T type S
J type B C type T
K type J P Custom/Type C
L type K M RTD Pt100
N type L 2 Linear 0-80mV
R type N 4 Linear 0-20mA
S type R X Linear 4-20mA
SET 1 : DISPLAY UNITS X None K Kelvin
C Degrees C P %
F Degrees F
SET 1 : DECIMAL POINT X No Quick Start Code 1 nnnn.n
0 nnnnn 2 nnn.nn
SET 1 : COLOUR X not applicable
SET 1 : HOME DISPLAY N PV only 1 PV + Alarm SP
A First Alarm SP only 2 PV + Alarm SP (READ ONLY)
SET 2 : OP 1 X unconfigured F low alarm + sensor/power fail
and H high alarm G rate of change+sensor/power
OP2 L low alarm 1 PV retrans 4-20mA
R rate of change 2 PV retrans 0-20mA
N new alarm flag 3 PV retrans 0-5Vdc
O sensor break 4 PV retrans 1-5Vdc
P power fail 5 PV retrans 0-10Vdc
7 high alarm + sensor break 6 PV retrans 2-10Vdc
8 low alarm + sensor break W alarm acknowledge
9 rate of change + sensor break K keylock
A high alarm + power fail U remote up button
B low alarm + power fail D remote down button
C rate of change + power fail V recipe 2/1 select
E high alarm + sensor/power fail
SET 2 : OP4 (AA RELAY) X unconfigured 8 low alarm + sensor break
H high alarm 9 rate of change + sensor break
L low alarm A high alarm + power fail
R rate of change B low alarm + power fail
N new alarm flag C rate of change+ power fail
O sensor break E high alarm + sensor/power
P power fail F low alarm + sensor/power
7 high alarm + sensor break G rate of change + sensor/power
Digital Input A X unconfigured U remote up button
W alarm acknowledge D remote down button
K keylock V recipe 2/1 select
Digital Input B X unconfigured
46 | P a g e
3200i Indicator Upgrades
Option Values Value Descriptions Price
Model Options 3204UPG Base Model
FUNCTION X No Change
AA RELAY R AA Relay
PROGRAMMER X No Change FM/DIN3440
APPROVAL X No Change
TRIAC/RELAY ENABLE X No Change
Model Options 3208UPG Base Model
FUNCTION X No Change
AA RELAY R AA Relay
PROGRAMMER X No Change
FM/DIN3440 APPROVAL X No Change
TRIAC/RELAY ENABLE X No Change
Model Options 3216UPG Base Model
FUNCTION X No Change
AA RELAY R AA Relay
PROGRAMMER X No Change
FM/DIN3440 APPROVAL X No Change
TRIAC/RELAY ENABLE X No Change
47 | P a g e
SUB32 Spares and Accessories
Option Values Value Descriptions Price
3216 SPARES ACCESS Accessories SUB32 SLE16VH High Voltage Sleeve $90
SUB32 SLE16VL Low Voltage Sleeve $85
SUB32 DB3216GRN Display Board and Bezel/Green $127
SUB32 BEZ3216GRN Bezel/Green $36
SUB32 PSUVH16LR Logic + Relay. VH PSU Board $127
SUB32 PSUVH16RR Relay + Relay. VH PSU Board $125
SUB32 PSUVH16LL Logic + Logic. VH PSU Board $125
SUB32 PSUVH16LD Logic + DC VH PSU Board $165
SUB32 PSUVH16DD DC + DC VH PSU Board $249
SUB32 PSUVH16DR DC + Relay VH PSU Board $165
SUB32 2CL16 RS232 Comms + CT + Logic $117
SUB32 4CL16 RS485 Comms + CT + Logic $117
SUB32 XCL16 No Comms + CT + Logic $55
SUB32 RCL16 Remote SP + CT + Logic $99
3204 SPARES ACCESS Accessories SUB32 RES250 250 Ohm Resistor $12
SUB32 RES500 500 Ohm Resistor $12
SUB32 BEZ3204GRN Bezel/Green $40
SUB32 BEZ3204SVR Bezel/Silver $40
3208 SPARES ACCESS Accessories
SUB32 RES250 250 Ohm Resistor $12
SUB32 RES500 500 Ohm Resistor $12
SUB32 BEZ3208GRN Bezel/Green $40
SUB32 BEZ3208SVR Bezel/Silver $40
48 | P a g e
Multi-Loop Controllers - 3508
Option Value Value Descriptions Price
Model Options 3508 1/8th DIN Base Model $702
FUNCTION CC Controller
F Profibus Controller $75
SUPPLY VOLTAGE VH 85 - 264 Vac
VL 20 - 29 Vac/dc $65
LOOPS 1 1 Loop
2 2 Loop $191
APPLICATION ZC Zirconia $508
VP Valve positioning $158
PROGRAMS 1 1 program -20 segments STD
10 10 program - 500 segments $83
25 25 program - 500 segments $110
50 50 program - 500 segments $162
RECIPES 1 1 recipes STD
4 4 recipes $55
8 8 recipes $110
TOOLKIT WIRES XXX Standard 30 wires STD
60 60 wires $91
120 120 wires $185
250 250 wires $259
FASCIA COLOUR G Green
S Silver
IO SLOTS 1 - 3 XX no module fitted
R4 change over relay $61
R2 2 pin relay $61
RR dual relay $114
T2 Triac Output $61
TT Dual Triac Output $114
D4 DC Analog Output $104
AM Analog Input $104
D6 Dc retransmission $104
TK triple contact input $104
TL triple logic input $104
TP triple logic output $104
VU potentiometer input $104
MS 24vdc transmitter PSU $104
G3 transducer PSU 5 or 10vdc $61
LO isolated single logic OP $104
DO Dual DC Output $156
H COMMS SLOT XX not fitted
49 | P a g e
A2 RS232 Modbus communications $115
Y2 2 wire RS485 Modbus communications $115
F2 4 wire RS422/485 Modbus communications $115
ET 10 Ethernet Modbus TCPIP $285
PB Profibus Communications $155
DN Devicenet Communications $155
AE 232 EI-Bisynch communications $162
YE 2 wire 485 EI-Bisynch communications $162
FE 4 wire 485 EI-Bisynch communications $162
PD Profibus + D Type Connector communications $182
M1 232 Modbus Master communications $115
M2 2 Wire 485 Modbus Master communications $115
M3 4 Wire 485 Modbus Master communications $115
J COMMS SLOT XX not fitted
A2 232 Modbus communications $115
Y2 2 wire 485 Modbus communications $115
F2 4 wire 485 Modbus communications $115
AE 232 EI-Bisynch communications $162
YE 2 Wire 485 EI-Bisynch communications $162
FE 4 Wire 485 EI-Bisynch communications $162
M1 232 Modbus Master communications $230
M2 2 Wire 485 Modbus Master communications $230
M3 4 Wire 485 Modbus Master communications $230
CONFIG TOOLS XX none
PRODUCT LANGUAGE ENG english
FRA french
GER german
SPA Spanish
MANUAL LANGUAGE XXX No Manual
WARRANTY XXXXX Standard
CALIBRATION CERTIFICATES XXXXX none
CERT1 certificate of conformity $46
CERT2 factory calibration certificate $96
CONFIG STD Standard config
50 | P a g e
Multi-Loop Controller - 3504
Option Value Value Descriptions Price
Model Options 3504 1/4th DIN Base Model $767
FUNCTION CC Controller
F Profibus Controller $75
SUPPLY VOLTAGE VH 85 - 264 Vac
VL 20 - 29 Vac/dc $65
LOOPS 1 1 Loop
2 2 Loop $191
APPLICATION XX Standard
ZC Zirconia $508
VP Valve positioning $158
PROGRAMS 1 1 program -20 segments
10 10 program - 500 segments $83
25 25 program - 500 segments $110
50 50 program - 500 segments $162
RECIPES 1 1 recipes
4 4 recipes $55
8 8 recipes $110
TOOLKIT WIRES XXX Standard 30 wires
60 60 wires $91
120 120 wires $185
250 250 wires $259
FASCIA COLOUR G Green
S Silver
IO SLOTS 1 - 6 XX no module fitted
R4 change over relay $61
R2 2 pin relay $61
RR dual relay $114
T2 triac $61
TT dual triac $114
D4 DC control $104
AM analogue input $104
D6 Dc retransmission $104
TK triple contact input $104
TL triple logic input $104
TP triple logic output $104
VU potentiometer input $104
MS 24vdc transmitter PSU $104
G3 transducer PSU 5 or 10vdc $61
LO isolated single logic OP $104
DO Dual DC Output $156
51 | P a g e
H COMMS SLOT XX not fitted
A2 RS232 Modbus communications $115
Y2 2 wire RS485 Modbus communications $115
F2 4 wire RS422/485 Modbus communications $115
ET 10 Ethernet Modbus TCPIP $285
PB Profibus Communications $155
DN Devicenet Communications $155
AE 232 EI-Bisynch communications $162
YE 2 wire 485 EI-Bisynch communications $162
FE 4 wire 485 EI-Bisynch communications $162
PD Profibus + D Type Connector communications $182
M1 232 Modbus Master communications $115
M2 2 Wire 485 Modbus Master communications $115
M3 4 Wire 485 Modbus Master communications $115
J COMMS SLOT XX not fitted
A2 232 Modbus communications $115
Y2 2 wire 485 Modbus communications $115
F2 4 wire 485 Modbus communications $115
AE 232 EI-Bisynch communications $162
YE 2 Wire 485 EI-Bisynch communications $162
FE 4 Wire 485 EI-Bisynch communications $162
M1 232 Modbus Master communications $230
M2 2 Wire 485 Modbus Master communications $230
M3 4 Wire 485 Modbus Master communications $230
CONFIG TOOLS XX none
PRODUCT LANGUAGE ENG english
FRA french
GER german
SPA Spanish
MANUAL LANGUAGE XXX No Manual
WARRANTY XXXXX Standard
CALIBRATION CERTIFICATES XXXXX none
CERT1 certificate of conformity $46
CERT2 factory calibration certificate $96
CONFIG STD Standard config
52 | P a g e
3500 Series Software Upgrades
Option Values Value Descriptions Price
Model Options 3504UPG Base Model
3508UPG
LOOPS XX No Change
1 1 Loop to 2 Loops $191
APPLICATIONS XX No change
VP Dual Valve positioning $158
ZC Zirconia $508
PROGRAMS 1 None to 1 program
2 None to 10 program $83
5 1 program to 10 programs $83
3 none to 25 program $110
6 1 program to 25 programs $110
4 none to 50 program $162
7 1 program to 50 programs $162
8 10 pgrograms to 25 programs $27
9 10 programs to 50 programs $79
10 25 programs to 50 programs $52
RECIPES 2 none to 4 recipe $55
4 1 recipe to 4 recipe $55
3 none to 8 recipe $110
5 1 recipe to 8 recipe $110
6 4 recipe to 8 recipe $55
TOOLKIT WIRES XX no change
1 30 wires to 60 wires $91
2 30 wires to 120 wires $185
3 30 wires to 250 wires $259
4 60 wires to 120 wires $94
5 60 wires to 250 wires $168
6 120 wires to 250 wires $74
COMMS 1 Enable Bisync $47
2 Enable Modbus Master $115
53 | P a g e
SUB35 Spares and Accessories
Model Values Value Descriptions Price
SUB35 BEZGRE 3504 BEZEL GREEN $400
SUB35 BEZSIL 3504 BEZEL SILVER $400
SUB35 BEZGRE 3508 BEZEL GREEN $43
SUB35 BEZSIL 3508 BEZEL SILVER $43
SUB35 DISPLAY 3504 DISPLAY $350
SUB35 DISPLAY 3508 DISPLAY $305
SUB35 DISBEZGR 3504 DISPLAY/BEZEL GREEN $400
SUB35 DISBEZSI 3504 DISPLAY/BEZEL SILVER $400
SUB35 DISBEZGR 3508 DISPLAY/BEZEL GREEN $305
SUB35 DISBEZSI 3508 DISPLAY/BEZEL SILVER $305
SUB35 SLEEVE 3504 SLEEVE $192
SUB35 SLEEVE-HV 3504 SLEEVE HV $192
SUB35 SLEEVE-LV 3504 SLEEVE LV $192
SUB35 SLEEVE 3508 SLEEVE $155
SUB35 SLEEVE-LV 3508 SLEEVE LV $155
SUB35 SLEEVE-HV 3508 SLEEVE HV $155
SUB35 CHASSIS 3504 CHASSIS $43
SUB35 CHASSIS 3508 CHASSIS $35
SUB35 XX no module fitted
SUB35 R4 change over relay $61
SUB35 R2 2 pin relay $61
SUB35 RR dual relay $114
SUB35 T2 triac $61
SUB35 TT dual triac $114
SUB35 D4 DC control $104
SUB35 AM analogue input $104
SUB35 D6 Dc retransmission $104
SUB35 TK triple contact input $104
SUB35 TL triple logic input $104
SUB35 TP triple logic output $104
SUB35 VU potentiometer input $104
SUB35 MS 24vdc transmitter PSU $104
SUB35 G3 transducer PSU 5 or 10vdc $61
SUB35 LO isolated single logic OP $104
SUB35 DO Dual DC Output $156
SUB35 A2 232 COMMS MODBUS $115
SUB35 Y2 2 WIRE 485 MODBUS $115
SUB35 F2 4 WIRE 485 MODBUS $115
SUB35 PB PROFIBUS $155
SUB35 AE 232 EI-Bisynch $162
SUB35 YE 2 wire 485 EI-Bisynch $162
SUB35 FE 4 wire 485 EI-Bisynch $162
SUB35 EM Ethernet module $172
SUB35 EA Ethernet RJ45 assembly $115
SUB35 ET Ethernet module and RJ45 $285
SUB35 DN DeviceNet $155
SUB35 IR INFRARED CLIP $131
SUB35 PROF9PIND Profibus 9 Pin comms adaptor $37
SUB35 2R49 2R49 0.1% SENSE RESISTOR $12
SUB35 MICSTD STANDARD MICRO $439
SUB35 MICPBS PROFIBUS MICRO $628
SUB35 PSU04VH 3504 HIGH VOLT PSU $695
SUB35 PSU04VL 3504 LOW VOLT PSU $695
SUB35 CROSS04 3504 CROSSBOARD $343
54 | P a g e
SUB35 CROSS08 3508 CROSSBOARD $333
SUB35 PSU08VH 3508 HIGH VOLT PSU $695
SUB35 PSU08VL 3508 LOW VOLT PSU $695
55 | P a g e
Multi-Loop Controller - Mini-8
Option Value Value Descriptions Price
Model Options MINI8 DIN Rail Mount Multi-Loop Controller $558
MINI8 FUNCTION ACQ IO acquisition only
4LP 8 control loops $76
8LP 4 control loops $137
16LP 16 control loops $300
PROGRAMS AND PROFILES 0PRG No Programs
1PRG 1 profile - 50 Programs $214
XPRG Multi Profiles - 50 Programs $320
MINII PSU VL 24Vdc PSU
COMMUNICATIONS MODBUS Non isolated Modbus RTU
DEVICENET Devicenet slave $158
ISOLMBUS Isolated Modbus RTU slave $81
ENETMBUS Ethernet Modbus TCP/IP Slave $228
PBUSRJ45 Profibus slave RJ45 $249
PBUS9PIN Profibus slave 9 Pin D type $249
TEMPERATURE UNITS C Centigrade
F Fahrenheit
SLOT 1 - 4 XXX No Board Fitted
RT4 4 channel RTD input $320
TC4 4 channel TC input $304
TC8 8 channel TC input $542
DI8 8 Channel Logic Input $132
AO4 4 channel 4-20mA output (Slot 4 Only) $386
AO8 8 channel 4-20mA output (Slot 4 Only) $651
RL8 8 Channel Relay output (Slot 2 and 3 Only) $163
DO8 8 channel logic output $132
CT3 3 channel CT input (slot 1, 2 or 3 only; 1 each unit) $183
MINI8 APPLICATION STD Standard
MINI8 WIRES 30 30 user wires
60 60 user wires $92
120 120 User Wires $185
250 250 User Wires $263
RECIPES NONE No recipes
RCP 8 recipes $122
MANUALS ENG English manual
CONFIGURATION SOFWARE NONE No configuration software
WARRANTY XXXXX Standard CALIBRATION CERTIFICATES XXXXX none
56 | P a g e
Mini-8 Software Option Upgrades
Option Values Value Descriptions Price
Model Options MINI8UP Base Model
MINI8 UPGRADE LOOPS XX No Change
2 0 to 8 Loops $137
1 0 to 4 Loops $76
3 0 to 16 Loops $300
4 4 to 8 Loops $61
5 4 to 16 Loops $224
6 8 to 16 Loops $163
MINI8 UPGRADE PROGRAMS XX No Change
1 0-50 Programs,1 Profile $214
2 8 Programmers 16 segments $320
MINI8 UPGRADE TOOLKIT WIRES XX No Change
1 30 to 60 wires $92
2 30 to 120 wires $185
3 30 to 250 wires $263
4 60 to 120 wires $93
5 60 to 250 wires $171
6 120 to 250 wires $78
MINI8 UPGRADE RECIPES XX No Change
1 8 Recipes $122
MINI8 UPGRADE APPLICATION XX No Change
57 | P a g e
SUBMIN8 Spares and Accessories
Model Values Value Descriptions Price
SUBMIN8 MECHANICS/CASE Case $152
SUBMIN8 MECHANICS/MBUS-LID Modbus Lid $86
SUBMIN8 MECHANICS/PBUS-LID Profibus Lid $86
SUBMIN8 MECHANICS/ENET-LID Ethernet Lid $86
SUBMIN8 MECHANICS/DNET-LID Devicenet Lid $86
SUBMIN8 MECHANICS/CAN-LID CanOpen Lid $86
SUBMIN8 MECHANICS/BLANKPLUG Blanking plug $5
SUBMIN8 MECHANICS/DRAILCLIP DIN rail clip $48
SUBMIN8 MECHANICS/MTGPLATE Mounting Plate $46
SUBMIN8 CONNECTOR/8WAY 8 way connector $38
SUBMIN8 CONNECTOR/VLPSU VL PSU $21
SUBMIN8 CONNECTOR/9WAY 9 way connector $48
SUBMIN8 CONNECTOR/DNET Devicenet connector $48
SUBMIN8 PCB/VLPSU Low Voltage DC Power Supply Board $61
SUBMIN8 PCB/DNET Devicenet Communications $420
SUBMIN8 PCB/TC8 8 Channel Thermocouple Input $542
SUBMIN8 PCB/DO8 8 Channel Digital Output $132
SUBMIN8 PCB/CT3 3 Channel CT Input $183
SUBMIN8 PCB/AO8 8 Channel Analog Output $651
SUBMIN8 PCB/AO4 4 Channel Analog Output $386
SUBMIN8 PCB/TC4 4 Channel Thermocouple Input $304
SUBMIN8 PCB/RT4 4 Channel RTD Input $320
SUBMIN8 PCB/DI8 8 Channel Logic Input $132
SUBMIN8 PCB/RL8 8 Channel Relay output $163
SUBMIN8 PCB/ISOLMBUS Modbus RTU isolated $336
SUBMIN8 PCB/NISOLMBUS Modbus RTU non isolated $213
SUBMIN8 PCB/PBUS/RJ45 Profibus Comms RJ45 $249
SUBMIN8 PCB/PBUS/9PIN Profibus Comms 9 Pin $249
SUBMIN8 PCB/ENET Ethernet Comms $228
SUBMIN8 PCB/DNETM12 Devicenet M12 $43
SUBMIN8 PCB/MB-STD Standard Motherboard $369
SUBMIN8 RESISTOR/TERM/MBUS/RJ45 Terminating Modbus load $26
SUBMIN8 RESISTOR/TERM/PBUS/RJ45 Terminating Profibus load $26
SUBMIN8 CABLE/CONFIG Config cable $58
SUBMIN8 CABLE/RJ45/3.0 3.0m base/base $21
SUBMIN8 CABLE/RJ45/0.5 0.5m base/base $21
SUBMIN8 RESISTORSHUNT/249R.1SHUNT 249R.1 2.49 0.1% Burden Resistor $21
58 | P a g e
Nanodac Recorder/Controller
Option Description Code Price
SUPPLY VOLTAGE 90-264V ac 110-370V dc 45-65Hz VH $1,050
20-42V ac RMS,20-54Vdc VL $1,088
CONTROLLER None (Default) X Std.
2 Control Loops C $160 Advanced Control Loop (Includes 2 Loops) A $283
PROGRAMMER None X Std.
Dual Setpoint Programmer P $258
OUTPUT OPTIONS Logic/Relay/Relay LRR Std.
Logic/Relay/IsoDC Output LRD $101 Logic/Logic/Relay LLR $41
Relay/IsoDC Output/IsoDC Output RDD $202
IsoDC Output/ IsoDC Output/ IsoDC Output DDD $325
APPLICATION BLOCKS None (Default) XX Std.
Zirconia for Atmosphere Control ZC $175 Sterilizer for Steam ST $155
Relative Humidity RH $155
COMMUNICATION PROTOCOLS Modbus TCP/IP Slave TS Std.
Modbus TCP/IP Master TM $155
EtherNet/IP client/server ES $204 Modbus TCP Master and EtherNet/IP TE $359
BEZEL STYLE Silver Bezel SV Std.
Wash-down Faceplate WD $22
TOOLKIT BLOCKS None XXXXX Std.
Basic Toolkit Blocks BASIC $99
OPERATING LANGUAGE English (Default) ENG Std. French FRA Std.
German GER Std.
Italian ITA Std.
Spanish SPA Std.
OEM SECRUITY Default XXX Std.
OEM Security OEM $57
FIXED FIELD Default XXXXX Std.
FIXED FIELD Default XXXXXX Std.
DUAL INPUT CHANNELS None XX Std.
5 Inputs enabled 05 $76 6 Inputs enabled 06 $153
7 Inputs enabled 07 $230
8 Inputs enabled 08 $306
DUAL TC SUPPORT None XX Std.
Dual T/C support enabled TC $52
59 | P a g e
Nanodac Recorder/Controller Upgrades
All software upgrades require new feature codes
The following items must be provided upon placement of order
1) Feature Code #1, #2, & #3
2) MAC address of the Nanodac
It is very important to verify you have the correct feature codes and MAC Address
To located the feature codes via front panel:
1) Log in as Engineer
2) Go to Instrument Security
To located the MAC address via front panel:
1) Log in as Engineer
2) Go to Network Interface
Example for Nanodac upgrade for the Controller option and Rel. Humidity would be:
NANOUPG/C/X/RH/XXX/XX/XXXXX/05/XX
Option Description Code Price CONTROLLER No Change X Std. 2 Control Loops C $160
Advanced Control Loop A $283
PROGRAMMER No Change X Std.
Dual Programmer P $258
APPLICATION BLOCKS No CHange XX Std.
Zirconia ZC $175 Sterilizer ST $155
Relative Humidity RH $155
OEM SECRUITY No Change XXX Std.
OEM Security OEM $57
COMMUNICATION PROTOCOLS No Change TS Std. Modbus TCP/IP Master TM $155
EtherNet/IP client/server ES $204
Modbus TCP Master and EtherNet/IP TE $359
TOOLKIT BLOCKS No Change XXXXX Std.
Basic Toolkit Blocks BASIC $99
DUAL INPUT CHANNELS No Change XX Std.
5 Inputs enabled 05 $76
6 Inputs enabled 06 $153
7 Inputs enabled 07 $230 8 Inputs enabled 08 $306
DUAL TC SUPPORT No Change XX Std.
Dual T/C support enabled* TC $52
60 | P a g e
Nanodac Accessories
Category Description Code Price Accessories Replacement Battery SUBNANO/ELEC/BATT $20
1.5ft USB Extension Cable SUBNANO/ELEC/USBEXT0.5M $37 2GB USB Memory Stick SUBNANO/MEM/002G $20
4GB USB Memory Stick SUBNANO/MEM/004G $30
8GB USB Memory Stick SUBNANO/MEM/008G $40
Adapter Plate SUBNANO/MECH/AP $65
61 | P a g e
I/O Expander Rack
Option Values Value Descriptions Price
Model Options 2000IO Base Model
SUPPLY VOLTAGE VL Low Voltage 24VAC/DC
I/O SET 1 10LR 10 Logic In/10 Relay Out $430
I/O SET 2 XXXX None Fitted
10LR 10 Logic In/10 Relay Out $430
MANUAL XXX No Manual
RFS DIN Rail Controller
Option Values Value Descriptions Price
Model Options RFS PRICE RFS $210
RFS INPUT 5 TC,RTC,20mA,60mV
RFS CONTROL ACTION 3 PID + SMART
RFS MAIN OUTPUT 1 RELAY $35
6 SSR $35
RFS OUTPUT 2 1 RELAY $35
6 SSR $ 35
RFS OPTIONS 0 NONE
5 ALM2+OFD+LOG.INP $210
RFS POWER SUPPLY 5 24V A.C. OR D.C.
LABELS 0ER EUROTHERM
62 | P a g e
Memocal 2000 Calibrator
Option Values Value Descriptions Price
MEMOCAL STANDARD MEM2090 ITS 90 STANDARD $1,750
MEMOCAL OPTIONS RS RS232 (Note 1) $180
MEMOCAL CASE 0 WITHOUT CASE
1 WITH CASE $129
MEMOCAL LABEL ER EUROTHERM CONTROLS
Note 1) RS232 is now a mandatory option; please include in all future Memocal orders.
CPI & Configuration Station
Option Values Value Descriptions Price
Model Options CONFIG Base Model
CONFIG TYPE ADAPTOR/2627 2000 series Configuration Station $630
CONFIG CODE USACORD Power lead - English connector
Model Options CONFIG Base Model
CONFIG TYPE CABLE/2627 Cable for Config Station $130
CABLE/2500 Config Cable (PC to 2500/Mini8/Epower/5000B) $90
Model Options Base Model
CONFIG TYPE CPI101000000 3000 Series Configuration Cable $321
CPI122000000 RFS Series Configuration Cable $385
KD485 Communications Isolator
Model Description Price
KD485 BASE MODEL KD485 Base Model
KD485 ADE/PROG STD Standard Converter/Isolator $370
ADE Automatic Drive Enable isolator $452
KD485 POWER SUPPLY PS Power Supply $177
PSDIN DIN Style Power Supply $229
KD485 COMMS 1 232 232 Communications Port
4XX 485/422 Communications Port
KD485 COMMS 2 232 232 Communications Port
4XX 485/422 Communications Port
63 | P a g e
Multi Loop Controller - 2500
Option Values Value Descriptions Price
Model Options 2500 Base Model $316
BASE SIZE S02 Single Base w/ 2 Output Module Positions $115
S04 Single Base w/ 4 Output Module Positions $115
S08 Single Base w/ 8 Output Module Positions $170
S16 Single Base w/ 16 Output Module Positions $295
S10 Single Base w/ 10 Output Module Positions $245
S12 Single Base w/ 12 Output Module Positions $260
EARTHING SYSTEM NONE Two earth clamps fitted
C02 Clamps\S02 $30
C04 Clamps\S04 $30
C08 Clamps\S08 $30
C16 Clamps\S16 $85
C10 Clamps\S10 $85
C12 Clamps\S12 $85
FUNCTION ACQIO Remote I/O Acquisition
UW User Wiring $45
SYSIO Remote IO acquisition $75
4LOOP 2 Local PID Blocks $130
4LOOPUW 4 Local PID Blocks + User Wiring $175
8LOOP 8 Local PID blocks $330
8LOOPUW 8 Local PID blocks +User Wiring $375
COMMS PROTOCOL MODBUS Serial Modbus Comms
ENETMBUS Ethernet Modbus TCP comms $145
PROFIBUS Profibus DP Communications $145
PBUSDPv1 Profibus DP + Version 1 extend $145
DEVICENET DeviceNet Communications $145
COMMS CONNECTOR TYPE RJ45 RJ45 Communications $65
9DTYPE 9 Pin DType for PB Comms $65
DN Standard Devicenet Connector $65
EN Ethernet terminal unit $65
PRE-CONFIGURATION NONE No application loaded
SLOTS 1 TO 16 NONE No terminal unit or blank
BLANK Blanking Plate $12
AI2-TC Dual channel Thermocouple Input w/ CJC $306
AI2-DC Dual channel IP for PT100 RTD and Hi-Impedance inputs $284
AI2-MA Dual channel Analog IP – 4 – 20mA input w/ 5ohm shunt $307
AI3 3 Channel 4-20mA IP w/ 24V PSU $304
AI3-DT 3 Channel 4-20mA IP w/ 24V PSU disconnect $348
AI4-TC 4 Channel Thermocouple Input + CJC (non-isolated) $416
AI4-MV 4 Channel mV input (non-isolated) $394
AI4-MA 4 Channel mA input module (non-isolated) $394
64 | P a g e
AO2 2 Channel Isolated Analog Output (mA/volts) $344
AO2-DT 2 Channel Isolated Analog Output (mA/volts w/disconnect) $388
DI424 4 Channel Digital Input module $110
DI424-DT 4 Channel Digital Input module w/disconnect $154
DI6-230V 6 Channel 230V ac logic input $156
DI6-115V 6 Channel 115V ac logic input $156
DI8L 8 Channel Non-isolated digital input $156
DI8C 8 Channel Non-isolated digital input (contact) $156
DO4L 4 Channel Digital Output (10mA Logic) $199
DO4L-DT 4 Channel Digital Output (10mA Logic w/ Disconnect) $243
DO424 4 Channel Digital Output (24vdc switched OP) $156
DO424-DT 4 Channel Digital Output (24vdc switched OP w/ Disconnect) $200
RLY4 4 Channel Isolated Relay Output $179
RLY4-FUSE 2 Channel Isolated Relay Output $223
DI8L-DT 8 Channel Non-isolated Digital Input (logic w/ Disconnect) $200
DI8C-DT 8 Channel Non-isolated Digital Input (contact w/ Disconnect) $200
DO8 8 Channel Digital Output $220
DO8-DT 8 Channel Digital Output w/ Disconnect $265
CONFIGURATION TOOLS NONE No tools
MANUAL ENG English manual
65 | P a g e
2500E Controller
Option Values Value Descriptions Price
Model Options 2500E Base Model $316
I/O CONTROLLER S Simplex I/O Controller
FUNCTION ACQIO Remote I/O Acquisition
UW User Wiring $45
SYSIO Remote IO acquisition $75
4LOOP 2 Local PID Blocks $130
4LOOPUW 4 Local PID Blocks + User Wiring $175
8LOOP 8 Local PID blocks $330
8LOOPUW 8 Local PID blocks +User Wiring $375
COMMS PROTOCOL MODBUS Modbus Communications
PROFIBUS Profibus DP Communications $145
PBUSDPv1 Profibus DP + Version 1 extend $145
DEVICENET DeviceNet Communications $145
ENETMBUS Ethernet Modbus TCP communications $145
CONFIG KEY CFGKEY RJ11 Start Up Key $38
66 | P a g e
2500M Controller
Option Values Value Descriptions Price
Model Options 2500M Base Model
I/O MODULES - INPUT TYPE AI2UNIV Dual Isolated Universal Analog Input $240
AO2UNIV Dual Isolated Analog Output $300
AI3 3 Channel Isolated Analog Input Module $260
DI424V Quad Digital Input (24V) $66
DO4LOGIC Quad Digital Output (Logic) $155
DO424V Quad Digital Output (24V) $ 112
DI8LOGIC Octal Isolated Digital Input (Logic) $112
DI8CONTACT Octal Isolated Digital Input (Contact) $112
RLY4 4 Channel Relay Module (3 x NO & 1 x NC) $156
AI4UNIV Quad Non-isolated Universal Analog Input $350
DO8 8 Channel Digital Output Module $220
FI2-DT 2 Channel Frequency Input Module $780
ZI Zirconia input model $1,900
POWER SUPPLY UNIT EXTPWR External Power Required
67 | P a g e
2500T Controller
Option Values Value Descriptions Price
Model Options 2500T Base Model
MODULE TERMINAL UNITS IOC I/O Controller Terminal Unit
AI2 Dual Ana I/P Module Terminal Unit
AI4 Terminal Unit for Quad Non-isolated Analog Input
AO2 Dual Analog O/P Module Terminal Unit $44
AI3 3 Channel Isolated Analog Input Terminal Unit $44
DI4 Quad Digital Input Module Terminal Unit $44
DO4 Quad Digital Output Module Terminal Unit $44
DI8 Octal Digital Input Module Terminal Unit $44
RLY4 Quad Relay Module Terminal Unit $44
DI6 6 Channel Isolated Digital Input $44
DO8 8 Channel Output Module Termination $44
UNITS S Single Controller
UNIV Universal (For All Types)
TC CJC For T/C,Or DC I/P's(NoOps) $66
DC DC Inputs $44
mA Terminal unit,4ch isolated mA $44
mV Terminal unit,4ch isolated mV $44
COMMS MODBUS Modbus Communications $64
PROFIBUS Profibus Communications $61
DEVICENET DeviceNet Communications $61
ENETMBUS Modbus TCP/ethernet $61
COMMS CONNECTOR TYPE RJ45 Not Applicable
9DTYPE RJ45 Communications
DN 9 Pin DType for PB Comms
EN Standard Devicenet Screw Con
68 | P a g e
2500B Controller
Option Values Value Descriptions Price
Model Options 2500B Base Model
BASE SIZE S02 Single Base $115
S00 2 module positions $115
S04 Single Base,4 Module Positions $115
S08 Single Base,8 Module Positions $170
S16 Single Base,16Module Positions $295
S10 Single Base,10Module Positions $245
S12 Single Base,12Module Positions $260
CLAMPS/NONE C02 2 module positions $30
C04 4 module positions $30
C08 8 module positions $30
C10 10 module positions $85
C12 12 module positions $85
C16 16 module positions $85
NONE No Clamps
MANUAL ENG English manual
NOM no manual
69 | P a g e
2500 Controller Accessories
Option Values Value Descriptions Price
Cables and Terminations
2500A TERM Term RS485 Multidropped Link $23
2500A CFGKEY RJ11 Start Up Key $38
2500A BLANK Blank Terminal Unit $12
2500A CONFIG 2500 Configuration Cable $39
2500A MODBUS/RJ45/RJ45/3M0 3 Meter Modbus Cable $28
2500A MODBUS/RJ45/RJ45/0M5 1/5 Meter Modbus Cable $23
2500A PROFIBUS/RJ45/RJ45/3M0 3 Meter Profibus Cable $28
2500A PROFIBUS/RJ45/RJ45/0M5 1/5 Meter Profibus Cable $23
24VC Power Supply
2500P 2500P/1A3/ENG/ 1.3 AMP Power Supply $165
2500P 2500P/2A5/ENG/ 2.5 AMP Power Supply $270
2500P 2500P/5A0/ENG/ 5 AMP Power Supply $465
2500P 2500P/10A/ENG/ 10 AMP Power Supply $600
70 | P a g e
Hardlock
Option Description Values Value Descriptions Price
Model Options -SBCNFG 2000 CONFIG STATION SPARE LOCATION 1 CONFIG 2000 CONFIG STATION
-2000 CONFIG CABLE ASSY/SOFTW LOCATION 2 HARDLOCK 2000 CASH HARDLOCK
-2000 OPTION TYPE LOCATION 3 1000 HARDLOCK WITH/$1000 $1,000
2500 HARDLOCK WITH/$2500 $2,500
5000 HARDLOCK WITH/$5000 $5,000
10000 HARDLOCK WITH/$10000 $10,000
71 | P a g e
EUROTHERM INC. - GENERAL CONDITIONS OF SALE FOR EUROTHERM PRODUCTS
The conditions of sale stated herein shall be an integral part of any contract
resulting from a purchase order placed upon Eurotherm Inc. (hereinafter
"Eurotherm" or "Seller"). Any statement made on any form issued by purchaser
of Eurotherm products or services ("Purchaser") shall not operate to defeat the
intent of these conditions unless specifically agreed upon in writing by
Eurotherm. Sale of the equipment or services (hereinafter together or individually
referred to as "Products or Product") by the Seller is expressly conditioned upon
the terms and conditions set forth herein. This document constitutes the entire
sales contract between Seller and Purchaser. Seller expressly rejects any different
or additional terms or conditions previously or hereafter proposed by Purchaser
unless agreed to in writing by an authorized representative of Seller.
ACCEPTANCE OF THE PRODUCTS BY PURCHASER SHALL
CONSTITUTE AGREEMENT TO ALL PROVISIONS HEREOF.
WARRANTY: SELLER EXPRESSLY WARRANTS THE PRODUCTS
MANUFACTURED BY IT AS MEETING THE APPLICABLE SELLER
PRODUCT SPECIFICATIONS. EXCEPT AS SET FORTH HEREIN, SELLER
MAKES NO OTHER WARRANTIES EITHER EXPRESS OR IMPLIED
(INCLUDING, WITHOUT LIMITATION, WARRANTIES AS TO
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE).
PURCHASER RETAINS RESPONSIBILITY FOR THE APPLICATION AND
FUNCTIONAL INDEQUACY OF THE OFFERING. IN ADDITION, THE
FOLLOWING SHALL CONSTITUTE THE EXCLUSIVE REMEDIES FOR
ANY BREACH BY SELLER OF ITS WARRANTIES.
Seller warrants to Purchaser that the Products to be delivered hereunder will be
free from defects in material or workmanship for such period after shipment by
Seller as defined in Eurotherm’s warranty policy available by calling, emailing,
writing or online at the contact location or website listed in the Miscellaneous
Section of these terms and conditions.
If the Products delivered hereunder do not meet the foregoing warranty,
Purchaser shall promptly notify Seller who shall thereupon replace or repair, at
Seller’s discretion, free of charge, provided the defective product, component, or
part thereof is returned to the nearest authorized Seller repair facility within the
time-frame specified in the applicable warranty term from date of shipment,
transportation charges prepaid by Purchaser. The cost to diagnose defects at the
job site, if required, shall be paid by Purchaser. Any product or component, or
part thereof so replaced or repaired shall be warranted by Seller for the remainder
of the original warranty period or three (3) months, whichever is longer. Any and
all such replacements or repairs necessitated by inadequate preventative
maintenance, or by normal wear and usage, or by the fault of Purchaser or power
sources supplied by others, or by attack and deterioration under unsuitable
environmental conditions shall be for the account of Purchaser. Seller shall not be
obligated to pay any costs or charges including "back charges" incurred by
Purchaser or any other party except as may be agreed upon in writing in advance
by Seller.
The liability of Seller under this warranty, whether the claim is based on contract
or negligence, shall not in any case exceed the cost of correcting defects in the
Products or of supplying replacement Products as herein provided and upon the
expiration of the warranty period all such liability shall terminate. The foregoing
warranty is exclusive and in lieu of all other warranties (except as to title),
whether written, oral, implied or statutory.
PATENTS: Seller shall defend Purchaser and pay any award of damages
assessed against Purchaser in any suit or proceeding so far as same is based on
any claim that the equipment, hardware or software products, or any part thereof
furnished hereunder (except for such products basically of Purchaser’s
specifications) shall in design or construction infringe any patent of the country of
its manufacture, provided Purchaser gives Seller prompt notice in writing of such
claim and permits Seller to contest same through its counsel or, at its option, to
settle by securing for Purchaser the right to continue to use such products or by
modifying them to avoid infringement, or by reclaiming them and reimbursing
Purchaser the sum paid for said Products; and provided Purchaser gives Seller all
necessary authority and assistance, at the expense of Seller, to enable Seller to do
so. The financial limit of such Indemnification shall not exceed the Contract
Price. This indemnity shall not apply to cases where the claimed infringement is a
result of (i.) Purchaser’s specifications, (ii.) parts supplied or designated by
Purchaser, (iii.) modification of the goods, by someone other than your business,
or (iv.) combination of your business’ products with other products, the
combination of which is alleged to be infringing.
INDEMNITY: Seller agrees to indemnify and save harmless Purchaser only
against liability imposed on Purchaser by law with respect to bodily injury or
property damage to the extent such liability results from the performance of Seller
under this contract. Seller does not agree to indemnify and save Purchaser
harmless except as set forth herein. Purchaser agrees to indemnify and save
harmless Seller for all loss, cost, or damage incurred by Seller as a result of
Purchaser’s or third party’s misuse or misapplication of Seller-supplied products.
LIMITATION OF LIABILITY: Seller’s liability on any claim of any kind,
including negligence, for any loss or damage arising out of, connected with, or
resulting from this sales contract or the performance or breach thereof, or from
the design, manufacture, sales, delivery, resale, installation, repair, operation or
use of any Products covered by or furnished under this agreement shall in no case
exceed the purchase price of the Products which gives rise to the claim. IN NO
EVENT, WHETHER AS A RESULT OF BREACH OF CONTRACT OR
WARRANTY OR NEGLIGENCE, SHALL SELLER BE LIABLE FOR
SPECIAL OR CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT
LIMITED TO, LOSS OF PROFITS OR REVENUE, LOSS OF USE OF
PRODUCTS OR ANY OTHER EQUIPMENT, COST OF CAPITAL, COST OF
SUBSTITUTE EQUIPMENT, FACILITIES OR SERVICES, DOWNTIME
COSTS, OR CLAIMS OF CUSTOMERS OF PURCHASER FOR SUCH
DAMAGES EVEN IF SELLER HAS BEEN INFORMED OF THE
POSSIBILITY OF SUCH DAMAGE OR LOSS BY PURCHASER OR ANY
THIRD PARTY.
PRICE AND ACCEPTANCE OF ORDERS: Prices stated in orders are
binding upon Seller for 30 days from the date hereof. Prices on all Products
shipped more than 30 days hereafter may be increased if necessary to cover
increased costs of labor and material incurred by Seller. Orders placed with sales
representatives are subject to acceptance by Seller in Leesburg, Virginia or
Rockford, Illinois. This acknowledgment constitutes such acceptance and is a
sales contract made in Virginia.
PAYMENTS: The purchase price stated herein shall be due and payable within
30 days after shipment of the equipment. If shipment is delayed by Purchaser,
Seller’s invoice shall be rendered on the date when Seller is prepared to make
shipment. Products held for Purchaser shall be at the risk and expense of
Purchaser. PAST DUE ACCOUNTS WILL BEAR A FINANCE CHARGE OF
1-1/2% PER MONTH ON THE UNPAID BALANCE, WHICH
CORRESPONDS TO AN 18% ANNUAL PERCENTAGE RATE. Purchaser is
prohibited from and shall not set off invoiced amounts or any portion thereof
against sums that are due or may become due to Seller, its parent, affiliates,
subsidiaries or other divisions or units.
SALES, DUTIES, FEES, EXPORT: Unless otherwise stated in the offering, all
prices are quoted in United States currency. In addition to the price specified in
this sales contract the amount of any present or future sales, use, excise or other
similar taxes or other charges applicable to the sale or use of the Products
(including, but not limited to any duties, charges, now existing or hereafter
imposed by Government authorities upon Products quoted by Seller, or upon the
production, sale, distribution, delivery, import or export thereof, or upon other
features related thereto) shall be paid by Purchaser, or in lieu thereof Purchaser
shall provide Seller with a tax-exempt certificate acceptable to the taxing
authorities. Unless Seller agrees to be the "exporter of record" when exporting
products from the United States, Purchaser shall be responsible for meeting
export/re-export requirements.
EXPORT RESTRICTIONS: Purchaser acknowledges that each Product and
any related software and technology, including technical information supplied by
Seller or contained in documents (collectively "Items"), is subject to export
controls of the U.S. government. The export controls may include, but are not
limited to, those of the Export Administration Regulations of the U.S. Department
of Commerce (the "EAR"), which may restrict or require licenses for the export
of Items from the United States and their re-export from other countries.
Purchaser shall comply with the EAR and all other applicable laws, regulations,
treaties, and agreements relating to the export, re-export, and import of any Item.
Purchaser shall not, without first obtaining the required license to do so from the
appropriate U.S. government agency; (i) export or re-export any Item, or (ii)
export, re-export, distribute or supply any Item to any restricted or embargoed
country or to a person or entity whose privilege to participate in exports has been
denied or restricted by the U.S. government. Purchaser shall cooperate fully with
Seller in any official or unofficial audit or inspection related to applicable export
or import control laws or regulations, and shall indemnify and hold Seller
harmless from, or in connection with, any violation of this Section by Purchaser
or its employees, consultants, agents, or customers.
PACKING AND SHIPPING: Prices are stated exclusive of packing and
shipping charges. All prices are Ex-works Shipping Point unless otherwise agreed
upon in writing by Seller. Delivery at such point to common carrier or postal
authorities shall constitute delivery to Purchaser, who shall thereafter be
responsible for delays, loss or damage in transit, although Seller will assist
Purchaser in processing claims.
72 | P a g e
DELIVERY: Title to all products EXCLUDING SOFTWARE, and risk of loss
or damage shall pass upon delivery by Seller to the possession of the carrier,
unless specified otherwise in writing by Seller. Any claims for loss or damage
after risk of loss has passed shall be filed by Purchaser with the carrier. Seller
shall not be liable for loss or damage from delay in delivery or failure to
manufacture. Delivery dates are approximate and are based on prompt receipt by
Seller at its factory of all necessary information including final agreement on
detailed specifications, on such date or with such lead times as may be specified
by Seller. If delivery is delayed at the request of, or due to acts or omissions by
Purchaser, Seller shall have the right to store the goods at a place of its own
choice for Purchaser’s account and risk and to invoice Purchaser in accordance
with the original contractual terms and for such storage charges incurred as a
result of the delay.
INSPECTION AND ACCEPTANCE: Purchaser shall upon delivery of
Products inspect and either accept or reject such Products within a reasonable
period not to exceed thirty (30) calendar days of delivery (the "Acceptance
Period"). In the event that Products do not comply with this Agreement,
Purchaser shall promptly notify Seller and provide a specific written explanation
of the basis for rejection. Purchaser shall be deemed to have accepted any Product
delivered hereunder and to have waived any right to reject in the event that Seller
does not receive such notice of rejection within the Acceptance Period. Seller
shall be afforded a reasonable opportunity to repair or replace non-Conforming
Product at Seller’s option. After the initial delivery provided for in the "Delivery"
clause, the risk of loss or damage to all Products in transit shall be borne by the
Party initiating the transportation of such Products; provided, if Seller reasonably
determines that the Product originally shipped complied with this Agreement,
then all expenses related to the improper rejection are the responsibility of
Purchaser.
DELAYS/FORCE MAJEURE: Shipping dates stated are approximate. Neither
party shall be considered in default in performance of obligations hereunder to the
extent that performance of such obligations, or any of them, is affected by an
event of Force Majeure. Force Majeure shall include, but not be limited to,
hostilities, restraint of rulers or peoples, revolution, civil commotion, terrorist
acts, strike, epidemic, accident, fire, flood, wind, earthquake, explosion, blockade,
or embargo, lack of or failure of transportation facilities, inability to obtain
material, labor or manufacturing facilities, or any law, proclamation, regulation or
ordinance, demand or requirement of any Government or Governmental agency
having or claiming to have jurisdiction over the work or with respect to materials
purchased for the work, or over the parties hereto, or any Act of God, or other act
of Government, or any cause whether of the same or different nature existing or
future, which is beyond the control and without the fault or negligence of the
parties hereto.
RESALE: If Purchaser is reselling the equipment, Purchaser agrees to furnish its
purchasers copies of the Standard Terms and Conditions of Sale, and Seller
agrees to make copies available upon request. In all events and regardless of
whether Purchaser complies with this provision, the rights of such purchasers
shall be determined under the provisions hereof entitled "Warranty," "Patents"
and "Limitation of Liability."
ASSIGNMENT: Neither Party shall assign this Agreement or any portion
thereof without the advance, written consent of the other Party, which consent
shall not be unreasonably withheld. Notwithstanding the forgoing, Seller may
assign this Agreement in the event of a merger, consolidation or reorganization or
in connection with the sale of all or substantially all of the assets of the business
of Seller to which this Agreement relates.
LICENSE GRANT: All software programs which are embodied in human
readable source form or machine readable object form and which include, but are
not limited to, programs having a series of instructions, statements and data, and
related materials provided by Seller ("Software") are the property of Seller and/or
others and are subject to the terms set forth in this License, in which Purchaser is
provided solely with a personal, nonexclusive and perpetual (except for breach by
Purchaser) license to use such programs solely for their internal business purposes
in the country in which the software was furnished and for execution on the
system for which it was provided.
THIRD PARTY INTELLECTUAL PROPERTY RIGHT NOTICES: The
Software may contain components that are owned by third parties ("Eurotherm
Licensors") and are incorporated into, or embedded in, the Software pursuant to
license arrangements between Eurotherm and such third parties. Use of the
Eurotherm Licensor components embedded in the Software is subject to: (i) this
Agreement or (ii) the Eurotherm Licensors end user license agreement (EULA) if
provided with the installation of the Software (a copy of which is available from
Eurotherm upon request). In addition, Licensee agrees that the embedded
components may not be used in any other fashion or for any other purpose other
than as provided under this Agreement or the EULA. Copyright and other
proprietary rights notices of Eurotherm and Eurotherm Licensors are contained in
the Software, and Licensee will not modify, delete, or obfuscate any such notices.
COPYRIGHT AND TITLE: No title to the Intellectual property in the software
programs or material is transferred to Purchaser under this license. All software
and its copyrights are owned by Seller and/or its suppliers. The software is
protected by United States copyright laws and international treaty provisions.
Therefore, Purchaser must treat the software like any other copyrighted material
(e.g., a book or musical recording) except that Purchaser may make copies of the
programs for use only with the system for which such programs were acquired.
Purchaser must reproduce and include the copyright notice on any backup copy.
The written materials and firmware may not be copied.
RESTRICTED USE: Purchaser shall not export or re-export the programs or
material without the appropriate United States and Foreign government licenses.
Purchaser agrees not to reverse engineer, de-compile, or disassemble the
Software. Purchaser may not rent or lease the Software to any third parties, but
may transfer the Software and written materials on a permanent basis provided no
copies are retained and the recipient agrees to the terms of this Software License.
Storage media, which Purchaser received from Seller may contain certain
Software for which Seller has not accepted an order from Purchaser for a
Software License. If Purchaser desires to license this Software, Purchaser must
obtain the appropriate Software License from Seller.
CANCELLATION: Purchaser may cancel its order by written notice, provided
Purchaser pays cancellation charges in accordance with Seller’s Cancellation
Policy in effect at the time an order is placed. This policy is available by calling,
writing or online at the contact location or website listed in the Miscellaneous
Section of these terms and conditions.
SCOPE CHANGES: All changes affecting the Product configuration or
otherwise affecting the scope of the order are to be documented in writing for
approval and authorization to incorporate such changes into the order. All
changes authorized by Purchaser are binding only if accepted in writing by Seller,
and may result in price, delivery and/or condition changes. Pricing of changes
shall be based on the then current prices. If an extension of delivery is required
beyond the original schedule, escalation shall be as agreed.
ARBITRATION: The parties agree that any controversy, claim or dispute
arising out of this Agreement, shall be determined by arbitration in the domicile
of the Seller, before a sole arbitrator. The arbitration shall be administered by the
American Arbitration Association ("AAA") pursuant to its Commercial Rules and
Supplementary Procedures for Large, Complex Disputes. The arbitrator shall not
be an officer, employee, director, or affiliate of either Party or of its affiliates. If
the Parties are unable to agree on an arbitrator within 30 days of the filing of the
Demand for Arbitration, an arbitrator shall be selected pursuant to the rules and
procedures of the AAA.
APPLICABLE LAW: The validity, construction, and interpretation of any
agreement relating to service provided by Seller, and the rights and duties of the
parties thereto, shall be governed by the laws of the Commonwealth of Virginia.
MISCELLANEOUS: This Agreement incorporates certain policies and
provisions by reference. These articles and clauses apply as if they were set forth
in their entirety. All orders are subject to the applicable Eurotherm Sales Policies
in effect at the time an order is placed. These Policies are available by calling,
emailing, writing or online at:
Phone: 703-724-7300
Fax: 703-724-7301
Email: [email protected]
Internet: www.eurotherm.com/warranty
Internet: www.eurotherm.com/cancellation
Internet: www.eurotherm.com/sales
Address: 44621 Guilford Drive, Suite 100
Ashburn, VA 20147
Any offering or contract of which these conditions are a part constitutes the final,
complete and exclusive statement of representations made by Seller, and Seller
shall not be bound by any representations, promise or inducement of any kind
unless set forth herein nor shall Seller be bound to any representations made
herein except to the designated recipient of any offering or contractual
commitment. No waiver, alteration or modification of any of the provisions
herein or of the provisions of any contract arising here from shall be binding on
Seller unless modified in writing and signed by Purchaser and Seller.
Eurotherm Inc.
HA136720 Rev 5, September 23, 2010
1
www.eurotherm.com
Document Version Control
2012 Eurotherm Controls Price Book Version 1
March 26, 2012 - Update to V01_2
Addition of PB comms module to the 2404 controller
2
www.eurotherm.com
For Technical Support or Application Assistance with your Eurotherm
Controller, please call:
703-724-7316
44621 Guilford Dr. Ste 100
Ashburn, VA 40148
703-724-7300