Since Its Establishment in 1998

download Since Its Establishment in 1998

of 7

Transcript of Since Its Establishment in 1998

  • 7/27/2019 Since Its Establishment in 1998

    1/7

    Since its establishment in 1998, Brightstar Aluminum Machinery Co., Ltd has became a well-known and highly-

    professional Company in China specialized in aluminum extrusion press, aluminum polishing machine,

    aluminum dross processer and the auxiliary equipments.

    Our products are as the following, extrusion press, feeding production line, woolen felt, bar heating furnace,

    straightening machine, die heating furnace, sawing machine, packing machine, film applicator, saw gauge tale,

    lifting components, shape correction machine, puller, anodizing production line,powder coated production line,

    melting furnace,aluminum polishing machine, aluminum dross processor and the auxiliary equipment.

    From aluminum extrusion equipment to aluminum auxiliary equipment, we can offer our professional products

    and one stop service for you. If you take us as your supplier, we can not only offer our high quality products for

    you, we can also act as your consultant and providers of high additional added value service.

    Company Profile

    Basic Information

    Company Name: Brightstar Aluminum Machinery Co., LtdBusiness Type: Manufacturer

    Product/Service

    (We Sell):

    Aluminum Profile,extrusion press,aluminum extrusion,melting

    furnace,Aluminum polishing machine,Homogenizing furnace,aluminum dross

    processor,Die heating furnace,powder coated production line,Anodizing

    production line,hydraulic sawing machine,straightening machine,aging

    furnace,hot log shearing,puller,dross processing machine,aluminum

    packaging machine,aluminum shape correcting machine,holding

    furnace,crucible melting furnaceAddress: Lizhong Industrial Area, Dali Town

    Number of Employees: Above 1000 PeopleCompany Website URL: http://www.brightstaralu.com

    Ownership & Capital

    Year Established: 1998Legal

    Representative/Business

    Owner:

    Loh

    Trade & Market

    Main Markets: North America

    South America

    http://www.brightstaralu.com/http://www.brightstaralu.com/http://www.brightstaralu.com/
  • 7/27/2019 Since Its Establishment in 1998

    2/7

    Eastern Europe

    Southeast Asia

    Africa

    Oceania

    Mid East

    Eastern Asia

    Western EuropeTotal Annual Sales Volume: US$50 Million - US$100 Million

    Factory Information

    No. of R&D Staff: Above 100 PeopleManagement Certification: ISO 9001:2000 OthersContract Manufacturing: OEM Service Offered Design Service Offered

    Links Engineering

    Manufacturers, fabricators and consultants

    Amrut Inds Estate, OPP Vasani Petrol Pump, Western Expess Highway, Mira. Thane 401104.

    Tel no: 022 28455267 : Introduction to Links Engineering

    We are established since last 25 years. We define ourselves as technocrats and engineers involved in the

    process of sharing technology and helping the cause of nation building.

    Company is into manufacturing of special purpose machines. We are taking the complete projects on turnkey

    basis, right from plant layout, machine building, installation material handling equipment and also providing the

    complete know how of the plant and the technology.

    We are always acquainted with the latest technology, which is suitable for the Indian market running conditions

    We have a strong team of engineers, who have an experience of more than 20 years of machine building and

    other related works.

    We have developed various products which are as per customer needs. We have developed varioustechniques which increases your productivity and profitability largely.

    We are also into trading of machines Indian and imported.

    Our products

    Steel ball plants

    Headers:

    Filler

    Stone grinder

    Lapping

    H. T furnace

    Tempering furnace

    Barrel

    Gauging machine

    Wire drawing machines

    Steel: B. B Blocks, wet wire plants for carbon, high carbon, P. C wire and alloy steel and S. S drawing

    Wire drawing machines for the aluminum and copper

  • 7/27/2019 Since Its Establishment in 1998

    3/7

    Furnaces for annealing, galvanizing, patenting, spherodizing

    Sheet metal plant

    H. R and C. R C. T. L line with uncoiler, leveler, shearing and conveyorise line

    Small width rolling mills for H. R and C. R

    Slitting lines for H. R and C. R

    Metal recovery plants

    Of zinc and cobalt from dross and ash

    NON FERROUS MACHINES

    Alumunium and lead: utensils plants, rolling mill plant and pipe drawing and sheet for lead plant

    Chatan plants: moulded and machine cut and rotary furnace

    Roll forming machine for strip sections

    Special conveyors

    Special purpose machines

    Gold ornaments processing plants

    Wax casting

    Chain making

    Wire forming

    Melting

    Holding furnaces

    S. S. moulds

    Aluminum melting, copper melting galvanizing plant

    Heat treatment, annealing, hardening, tempering ovens, special purpose furnaces

    Material handling equipments

    We are into manufacturing of various material handling equipmentsElectric operated trolleys (E. O. T) Cranes upto 25 tons

    Electric wire rope hoist of 1 ton, 2 ton 3 ton, 5ton, 7. 5 ton, 10 tons

    Conveyors

    Trolleys

    We also give entire planning for material flow, right from unloading processing and loading

    Company Profile

    Basic Information

    Company Name: Links engineeringBusiness Type: ManufacturerProduct/Service

    (We Sell):

    Special Purpose Machines, Material Handling Equipments, Consultants,

    Fabricators, Traders Of Old Machines

    Address:Links Engineering, A / 6 / 13, Rolling Hills, Flat No 34, Lic Colony, Borivali

    WestBrands: Links

    Number of Employees: 5 - 10 People

  • 7/27/2019 Since Its Establishment in 1998

    4/7

    Company Website URL: http://

    Ownership & Capital

    Year Established: 1982Ownership Type: Individual (Sole proprietorship)

    Trade & Market

    Main Customers: industrialistsTotal Annual Sales Volume: Below US$1 Million

    Total Annual Purchase

    Volume:Below US$1 Million

    Factory Information

    Factory Size: Below 1,000 square metersFactory Location: Industrial estate

    QA/QC: In HouseNo. of Production Lines: 1

    No. of R&D Staff: Less than 5 PeopleNo. of QC Staff: Less than 5 People

    Aluminum dross processing

    machine

    Aluminum dross processor

    Dross processing machine

  • 7/27/2019 Since Its Establishment in 1998

    5/7

    1. No need for any fuel in the whole process

    2. To reduce the dirt, smog pollution problem with dirt and smoke

    ventilation equipment.

    3. Automatic mechanical operation, no harmful to the operators health.

    4. High efficiency for recycling rate(90% of aluminum from the dross), short

    working time (10-12 minutes for finish the separation of 200kgs-400kgs

    aluminum and dross.

    All technical information and the quotation is available and we will send it to

    you as we get your information.

    Dross Crusher & Processing Plants

    The hydraulically operated dross crusher from aluminum electrolysis, or for whole bakedor green waste dross for reuse as material in dross mills.

    Aluminium Dross Processing Machine

    Aluminium dross processor is a machine adopts foreign advanced technology, no need for any fuel, fast recovery, which can made full use of the

    aluminum ash and scraps with high aluminum contents and replace the old way for recycling by labour. This machine can separate the aluminum and

    ash by one time, and has been very high efficiency for recycling rate(90% of aluminum from the ashes),short working time (10 minutes for finish the

    separation of aluminum and dross),low electricity consumption, environmental friendly(with dirt and smoke ventilation equipment) features. The whole

    machine is fully automatic in mechanical working way and its efficiency is increased 15% comparing with the manual way.

    1. No need for any fuel in the whole process

    2. To reduce the dirt, smog pollution problem with dirt and smoke ventilation equipment.

    3. Automatic mechanical operation, no harmful to the operators health.

    4. High efficiency for recycling rate (90% of aluminum from the ashes), short working time (10-12 minutes to finish the separation of 200kgs-400kgs

    aluminum and ashes)

  • 7/27/2019 Since Its Establishment in 1998

    6/7

    From aluminum extrusion equipment to aluminum auxiliary equipment, we can offer our professional products and one stop service for you. If you take

    us as your supplier, we can not only offer our high quality products for you, we can also act as your consultant and providers of high additional added

    value service.

    Dross Crusher For the Aluminum Industry

    Shredder Installations

    Dross Processing Plants

    Turnings Crushers

    Briquetting Presses

    Anode Crushers

    Scrap Baling Presses

    Scrap Shears

    Refractory

    Material

    Foundry

    Flu

    x

    Ra

    w

    Mat

    eri

    als

    Aluminium

    Scrap

    Aluminium

    Dross for

    Exothermic

    Riser

    Sleeves &Foundry

    Fluxes

    We at PARAS METALLURGICAL INDUSTRIES are into the business of Aluminium

    Dross for more than 3 decades. We have been regularly supplying Aluminium Dross of

    required grades and qualities all over India, which is used as a raw material in

    manufacturing Exothermic/Insulating Riser Sleeves, Fluxes and other Refractory Material.

    Our production capacity is more than 1000 Metric Tons per month.

    We supply Aluminium Dross of desired aluminium contents and use BSS sieve to obtain the

    specific grade and granular size as per customer demands. By using our in-house

    laboratory results, we check the material for best quality standards. We are also capable of

    determining the amount of foreign elements, dissolvable items and chloride in the dross,

    and thus can supply this material with desired grade and quality requirements of the

    customer.

    Below is the list of type of aluminium dross grades and quality that we supply regularly to

    Foundry Industry:

    Product (Aluminium Dross) Quality

    -40 To Dust Mesh 30% Al Content

    -40 To Dust Mesh 20% Al Content

    -40 To Dust Mesh 15% Al Content

    -40 To Dust Mesh 10% Al Content

    Aluminium Dross For

    Exothermic/Insulat

    ion Riser Sleeves

    http://www.parasmetallurgicalind.com/foundry-fluxes.htmlhttp://www.parasmetallurgicalind.com/foundry-fluxes.htmlhttp://www.parasmetallurgicalind.com/foundry-fluxes.htmlhttp://www.parasmetallurgicalind.com/foundry-fluxes.htmlhttp://www.parasmetallurgicalind.com/foundry-fluxes.htmlhttp://www.parasmetallurgicalind.com/foundry-fluxes.htmlhttp://www.parasmetallurgicalind.com/foundry-fluxes.htmlhttp://www.parasmetallurgicalind.com/foundry-fluxes.htmlhttp://www.parasmetallurgicalind.com/foundry-fluxes.htmlhttp://www.parasmetallurgicalind.com/foundry-fluxes.htmlhttp://www.parasmetallurgicalind.com/aluminium-scrap.htmlhttp://www.parasmetallurgicalind.com/aluminium-scrap.htmlhttp://www.parasmetallurgicalind.com/aluminium-dross-for-exothermic-riser-sleeves.htmlhttp://www.parasmetallurgicalind.com/aluminium-dross-for-exothermic-riser-sleeves.htmlhttp://www.parasmetallurgicalind.com/aluminium-dross-for-exothermic-riser-sleeves.htmlhttp://www.parasmetallurgicalind.com/aluminium-dross-for-exothermic-riser-sleeves.htmlhttp://www.parasmetallurgicalind.com/aluminium-dross-for-exothermic-riser-sleeves.htmlhttp://www.parasmetallurgicalind.com/aluminium-dross-for-exothermic-riser-sleeves.htmlhttp://www.parasmetallurgicalind.com/aluminium-dross-for-exothermic-riser-sleeves.htmlhttp://www.parasmetallurgicalind.com/foundry-fluxes.htmlhttp://www.parasmetallurgicalind.com/foundry-fluxes.htmlhttp://www.parasmetallurgicalind.com/foundry-fluxes.htmlhttp://www.parasmetallurgicalind.com/foundry-fluxes.htmlhttp://www.parasmetallurgicalind.com/foundry-fluxes.htmlhttp://www.parasmetallurgicalind.com/aluminium-scrap.htmlhttp://www.parasmetallurgicalind.com/aluminium-scrap.htmlhttp://www.parasmetallurgicalind.com/aluminium-dross-for-exothermic-riser-sleeves.htmlhttp://www.parasmetallurgicalind.com/aluminium-dross-for-exothermic-riser-sleeves.htmlhttp://www.parasmetallurgicalind.com/aluminium-dross-for-exothermic-riser-sleeves.html
  • 7/27/2019 Since Its Establishment in 1998

    7/7

    -40 To Dust Mesh Low Al Content

    -20 +150 Mesh 30% Al Content

    -20 +150 Mesh 20% Al Content

    -20 +150 Mesh Low Al Content

    Processing of aluminium dross is one of the most challenging tasks because of its toxic nature. The dross generated while melting at various

    facilities is generally remelted with salts to recover residual metal values. The remaining residue dross contains mostly aluminium oxide, alloying

    elements and salts such as NaCl or KCl. This residue dross while stock piling creates pollution of the adjoining area as salts leach out to water

    stream and also emits harmful gases. In the present study domestic aluminium dross was treated for developing a suitable process flow sheet to

    obtain -alumina a high valued product. Initially H2SO4 leaching was carried out for both un-washed and washed dross. With un-washed dross the

    leaching efficiency achieved was 71% but washing of dross followed by leaching raised the recovery to 84%. Washing of dross is essential to have

    higher alumina recovery and also to recover salt for recycling. The liquor obtained after treatment of the dross with acid was further processed to

    obtain aluminium hydroxide of amorphous nature by hydrolyzing aluminium sulphate with aqueous ammonia. The aluminium hydroxide was then

    subjected to calcinations which resulted in the formation of -alumina at 900 C.