Since 1986 Issue 1.2 Applicator & Power Tools...spare parts for the applicators, please see page 19...

Offering Full Technical Support

01692 406822Station Road, Worstead, North Walsham, NR28 9RZ

[email protected]

www.marineindustrial.co.uk

Quality Products Exceptional Service Since 1986

P.C Cox PAGE 1

Fein, Mirka & Cytec PAGE 4

Linbide PAGE 2

Pro-Set PAGE 5

Festool PAGE 2-4

Graco PAGE 6-18

Hints & Tips PAGE 19-30

Call Today

01692406822

Issue 1.2

Applicator & Power Tools

1

Offering Full Tehnical Support


[email protected]


PC COX & CYTEC

P C Cox Hand Operated Cartridge & Sachet Applicators

High quality, easy to use and maintain hand operated applicators suitable for daily trade use.

Product Codes:Skeleton CX-250-SG400CC Sachet CX-HBG400600CC Sachet CX-HBG600

P C Cox Hand Operated Special Ratio Applicators

High quality, easy to use and maintain hand operated applicators for special ratio products. Suitable for daily trade use.

Product Codes: 50ml 1:1 CX-MPD50380ml 10:1 CX-CCM380X-10 400ml 1:1 CX-VBM200X

P C Air Operated Cartridge & Sachet Applicators

High quality, easy to use and maintain air operated applicators suitable for daily trade use. NB: We also supply spare parts for the applicators, please see page 19 in the hints & tips section.

Product Codes:300cc Cartridge CX-TYNE215 400cc Cartridge CX-TYNE250-AP 400cc Sachet CX-APG400600cc Sachet CX-APG600

P C Cox Air Operated Applicators

High quality, easy to use and maintain air operated applicators for special ratio products. Suitable for daily trade use.

Product Code: 10:1 380cc CX-CCA380A-101:1 400cc CX-VBAMR400A

P C Solo Clamp

High quality, long lasting solo clamps ideal for holding substrates in place while machining and waiting for adhesives to cure.

Product Code:150mm CX-150-P

CYTEC Resin Catch-Pot

Designed for use with the vacuum infusion process, it collects the excess resin and prevents resin contamination of vacuum pump and hose fittings. Can also be used to detect vacuum bag leaks. The split seal system ensures there is no need for clamps to maintain vacuum integrity.

For more products and information please contact the Sales Office

2



[email protected]


LINBIDE, FEIN & MIRKA

Linbide Scrapers

Solid steel construction designed for quickly and efficiently removing paints, varnishes, lacquers and GRP. Scraper comes with blade.

Product Codes:50mm IND-R-TC550Triangle IND-R-GP14

Linbide Scraper Blades

Replacement blades for the LINBIDE scraper range. Made from high quality tungsten steel. Blades come in packs of pre-cut packs.

Product Codes:50mm Pack of 5 IND-R-TCB5Tri Blades pack of 5 IND-R-GP14S

FEIN MultiMaster

The universal system for interior fitting and renovation with unique equipment including extensive sanding accessories for a huge number of different applications. The Multimaster kit comes in a convenient carry case loaded with a number of accessories to get you started.

For more products and information please contact the Sales Office

MIRKA Deros 5650CV 125/150mm Sander Kit

The first ever electric sanding machine with a brushless motor and no external power supply. It is also the lightest electric machine on the market. It has a soft start function, a built in electronic motor brake and a smooth, easy to operate lever to control motor speed.

Product Code: 150mm MA-MID56502CAUK

MIRKA DEROS625CV 150mm Sander

This direct electric random orbital sander is equipped with a 150 mm pad and has a 2.5 mm oscillation. Its is the first ever electric sanding machine with a brushless motor and no external power supply. The mains voltage is 220V - 240V. It is also the lightest electric machine on the market and suitable for general sanding purposes on almost all kind of surfaces.

Product Code : 150mm MA-BMFC00089

MIRKA CEROS 325CV 77mm Central Vacuum Orbital Sander

This Compact Electric Random Orbital Sander MIRKA® CEROS 325CV (Central Vacuum) with a 2,5 mm orbit is especially developed to tackle smaller sanding operations.Thanks to its smaller backing pad, it is designed for smaller operations.

Product Code:77mm MA-BMFC00061

3



[email protected]


MIRKA, ATLAS COPCO, GRACO

MIRKA Ceros 650CV Vacuum Orbit Sander 150mm

This Compact Electric Random Orbital Sander MIRKA® CEROS 650CV (Central Vacuum) with a 5,0 orbit is an allround sander suitable for almost all kind of surfaces. It is equipped with an 150 mm backing pad.

Product Code: 150mm MA-MIM6502011UK

MIRKA ROS625CV 150mm Central Vacuum Sander

This Pneumatic Random Orbital Sander MIRKA® ROS 625CV (Central Vacuum) with a 2,5 mm orbit is an excellent choice for fine sanding tasks. When connecting the sander to a dust extraction system you are able to sand dust-free. MIRKA®ROS 625CV is equipped with a 150 mm backing pad.

Product Code :150mm MA-8993025111

MIRKA Dust Extractor 915L

This highly versatile industrial Dust Extractor for professional use is equipped with an automatic electric start, adjustable suction and an earthed hose connection to eliminate static electricity in the hose. A fleece dust bag is also included.

Product Code: 230v MA-8999700111

ATLAS COPCO Automan Compressor

AC series oil-lubricated compressors are designed with a slow-running compressor block for exceptional long service life. Cast iron cylinders with low-speed pistons have traditionally been recognized for their durability.

Product Codes:AC30E AT-6250365505AC55E AT-6250367705

GRACO AirPro Spray Gun

The AirPro air spray gun delivers exceptional spray performance while addressing your environmental and operator concerns - whether you’re a custom shop or a high volume manufacturing facility. Maximize operator comfort with our lightweight design, low trigger force and ergonomic handle.

Product Codes:14mm GO-28901118mm GO-289012

GRACO Pressure Pot 1.9L

This pressure cup is designed to be used with any pressure feed manual spray gun when more than 1 quart of fluid will be used. Pressure cups provide a better degree of control over atomizing air and fluid pressure than siphon feed equipment. The Model 288776 enables you to spray a wider range of refinish materials and has a full 2-quart (1.9 liter) capacity when needed.

Product Code:1.9L GO-288776

4



[email protected]


GRACO

GRACO Fine RAC X Switch Tips

The highest performing and longest lasting tips in the industry! RAC X is designed to maintain a wider spray pattern for a longer period of time. A wider spray fan means fewer passes with the gun and better productivity.

Product Codes:308 RAC X GO-FFA308410 RAC X GO-FFA410412 RAC X GO-FFA412414 RAC X GO-FFA414514 RAC X GO-FFA514

GRACO RAC X Professional Tips

RAC X Switchtips are the highest performing and longest lasting tips in the industry! RAC X is designed to maintain a wider spray pattern for a longer period of time. A wider spray fan means fewer passes with the gun and better productivity.

Product Codes:515 RAC X GO-PPA515517 RAC X GO-PPA517617 RAC X GO-PPA617414 RAC X GO-PPA619

GRACO Filters

Using filters prevents dirt or contaminants from entering the spray system. They minimize possible tip clogs and optimise the quality of your finish. The size of the filter is defined by their number of mesh. The more mesh, the more the material will be filtered. It is advised to use a smaller filter with less viscous materials (100 mesh) and a larger filter (60 mesh) with thicker materials such as latex paints.

Product Codes:60ms GO-224459100ms GO-224468

GRACO Spray Gun Cleaning Kits

Graco’s Ultimate spray gun cleaning kits include all the tools you need to maintain your spray guns and keep them lasting longer. Durable, solvent-compatible storage. Stainless steel components resist corrosion and are compatible with solvents. Resistant to MEK, acetone, xylene, lacquer thinner and mineral spirits.

Product Code:Kit GO-15C161

GRACO Lubricant

This Non Silicone Lubricant is specifically designed for the spray guns moving parts, ensuring that any adjustments can be made easily and freely.

Product Code:113g GO-111265

GRACO Airpro Needle & Nozzle Kit

Available in 1.1mm and 1.4mm for topcoats and 1.8mm for Primers, the Stainless Steel needle comes with Graco’s unique interchangeable nylon tip which stops any wear on nozzles.

Product Codes:1.1mm GO- 2894601.8mm GO-489494

5



[email protected]


DELVILBISS

DEVILBISS Cspray Guns

Cspray guns are precision built by Devilbiss using the best materials and component parts for a guaranteed, reliable, long lasting and durable working life in all industrial markets. The new Critical Droplet atomisation Technolgy (CDT) air caps provide enhanced performance and best finish right across the range of marine paints.

Products Codes:1.2mm Gravity FB-ADV-GCDTG-121.2mm Pressure FB-ADV-PCDT-12

DEVILBISS Gravity Gun Stand

Ideal for Cspray guns, can we wall or bench mountedDEVILBISS Gravity Gun Stand

Product Code:1 Gun Stand FB-GFV-50-F

DEVILBISS DGI Digital Air Pressure Gauge & Regulator

The ultimate development in compressed air management at the gun. Fitting between the air line and the spray gun, or pneumatic tool, it provides smooth air flow control and extremely accurate and repeatable pressure readings.

Product Code: Gauge FB-DGIPRO-502-BAR

DEVILBISS In-line Air Pressure Gauge & Regulator

The Devilbiss air pressure gauge and regulator fits neatly in-line at the gun air inlet, it increases or decreases the working pressure at the gun. Its calibrated up to 11 Bar (160 psi)DEVILBISS In-line Air Pressure Gauge & Regulator

Product Code: Gauge FB-HAV-501-B

DEVILBISS Acetal Gravity Feed Cup

DeVilbiss gravity feed cups are made of strong, lightweight acetal. In addition, an integral drip check in the cup lid virtually eliminates leaks from the vent hole.

Product Code: Gavity FB-GFC-501

DEVILBISS Inline Gravity Filters

Replacement gravity cups filters for GFC cups. Effectively removes dirt, flakes and scum keeping the finish blemish free. The filters are resistant to most solvents - easily cleaned.

Product Code: Pack of 5 FB-KGP-5-K5

6



[email protected]


DEVILBISS

DEVILBISS Viscosity Cups

Used for the accurate reading of paint thickness. The best way to determine the best mix for spraying. Place in the pot of mixed paint and take draining time. Many manufacturers recommend 22-23 seconds to drain. Consult with your paint manufacturer’s technical data sheet (TDS) for more information

Product Code: Pack of 2 FB-7000-114-K2

DEVILBISS Graduated Mixing Cups

Easy to use, disposable mixing cup, made from solvent resistant clear polypropylene. Calibrated with a 0-600 volumetric measurement scale.

Product Code: Pack of 50 FB-MC-1-K50

DEVILBISS Pro Spray Gun Cleaning Kit

Multi-purpose professional kit suitable for all spray guns. Includes a comprehensive range of brushes and tools. The cleaning kit can be easily hung in the gun cleaning area. The kit includes cleaning instructions and spray gun oil.

Product Code: Kit FB-KK-4584

DEVILBISS Gun Cleaning Brushes

Ideal for a variety of gun cleaning jobs Tough resilient bristles for useful service. Suitable size for cleaning most parts of the gun.

Product Code: Pack of 3 FB-4900-5-1-K3

ONE OF THE WORLD LEADERSIN ADHESIVES AND SEALANTS

DISTRIBUTORS FOR

SIKA® MARINE

7



[email protected]


PRO-SET 8m³/hr Vacuum Pump PRO-SET 10m³/hr Vacuum Pump

PRO-SET 16m³/hr Vacuum Pump PRO-SET 25m³/hr Vacuum Pump

PRO-SET 40m³/hr Vacuum Pump

Technical Data 8m³/hrMax. Vacuum Force - mbar(abs) 150Max.Vacuum Flow 8.0 m³/hrPower Supply 220-240VV / 50 Hz S.PMotor Power (KW) 0.35RPH at 50 Hz 2800Max. Noise Level dB (A) 58Approx. Weight 11.5kgInlet Port Thread (G") 03-AugApprox. Dimensions 215 x 151 x 171 mm

For more information please contact the Sales Office

Properties UnitMax Suction Air Rate m³/h / 50 Hz 10Absolute Pressure (Max) mbar / 50 Hz 150Motor Capacity Installed kW / 50 Hz 0.37Speed RPM / 50Hz 1420Single Phase Motor v±10% 50+60 Hz 230Noise Level bD (A) / 50 Hz 60Length mm 429Width mm 206Height mm 195Inlet Port Thread G" ½Weight kg 16


Properties UnitMax Suction Air Rate m³/h / 50 Hz 10Absolute Pressure (Max) mbar / 50 Hz 150Motor Capacity Installed kW / 50 Hz 0.55Speed RPM / 50Hz 1420Single Phase Motor v±10% 50+60 Hz 230Noise Level bD (A) / 50 Hz 61Length mm 452Width mm 231Height mm 211Inlet Port Thread G" ½Weight kg 22.4

Properties UnitMax Suction Air Rate m³/h / 50 Hz 25Absolute Pressure (Max) mbar / 50 Hz 150Motor Capacity Installed kW / 50 Hz 1.75Speed RPM / 50Hz 1420Single Phase Motor v±10% 50+60 Hz 230Noise Level bD (A) / 50 Hz 62Length mm 505Width mm 260Height mm 290Inlet Port Thread G" ¾Weight kg 26



Properties UnitMax Suction Air Rate m³/h / 50 Hz 40Absolute Pressure (Max) mbar / 50 Hz 150Motor Capacity Installed kW / 50 Hz 1.25Speed RPM / 50Hz 1420Single Phase Motor v±10% 50+60 Hz 230Noise Level bD (A) / 50 Hz 67Length mm 572Width mm 280Height mm 290Inlet Port Thread G" ¾Weight kg 38.5


PRO-SET

8



[email protected]


GRACO AirPro

Combine spraying excellence with operator comfort and many other clever innovations, and you get the AirPro air spray gun from Graco. Ergonomically designed for superior handling, the AirPro guns have a soft, controlled and adjustable spray pattern with less overspray.

1. Aircaps in three air spray technologies to fit the needs of your environment

2. Two piece needle with replaceable tip reduces operating costs

3. Quick turn retaining ring which captures aircapupon disassembly

4. Long life needle packing for reduced downtime

5. Ultra-light trigger pull reduces operator fatique

6. Inlet pressure adjustment (cheater) valve increases spraying flexibility

7. Air flow consumption designed to meet environmental compliance

8. Uniform air flow for reduced turbulence

9. Ergonomic knobs provide excellent operator comfort

10. One of the lightest weight (410 grams) guns in its category

How To Order:

1. Determine feed (pressure, gravity or siphon)2. If pressure feed, identify application type3. Select spray type (conventional, HVLP or compliant)4. Select material viscosity5. Select average flow rate

MATERIAL VISCOSITY VISCOSITY (Centipoise)Light 5-15

Light-Medium 15-30Medium 30-70

Medium-Heavy 70-100Heavy >100

GRACO

9



[email protected]


GRACO Pressure Feed - General Metal Spray Guns

GRACO

GRACO AirPro

Maximum Air Inlet Pressure 100 psi (0.7 MPa, 7 bar)Maximum Fluid Inlet Pressure 300 psi (2.1 MPa, 21 bar)

Maximum HVLP/Compliant Inbound Air Pressure*HVLP** 19-30 psi (0.1-0.21 MPa, 1.3-2.1 bar)Compliant** 29-35 psi (0.2-0.24 MPa, 2.0-2.4 bar)

Air ConsumptionConventional General Metal @ 36 psi (0.25 MPa, 2.5 bar) 12.6 cfmHVLP General Metal @ 19 psi (0.13 MPa, 1.3 bar) 14.9 cfmCompliant General Metal @ 29 psi (0.2 MPa, 2.0 bar) 11.7 cfmFluid and Air Operating Temperature Range 32°-109°F (0°-43°C)Weight 410 g (14.46 oz)Air Inlet 1/4 npsm (R1/4-19)Fluid Inlet 3/8 npsm (R3/8-19)Wetted Parts 303 SST, 17-4 PH SST, PEEK, acetal, UHMWPE

Instruction manualPressure Feed 312414Gravity Feed 312579Siphon Feed 312578

* Produces 10 psi (0.07 MPa, 0.7 bar) spraying pressure at aircap** Dependent on application type

Part Number

Spray Type Nozzle in.(mm)

Material Viscosity

Flow oz/min (I/min)

Aircap KitNeedle/

Nozzle Kit

GO-288726 Conventional0.020 (0.5)

Light4-8

(0.12-0.24)GO-289773 GO-289458


Light4-12

(0.12-0.35)GO-289773 GO-289459


Light-Medium

8-20 (0.24-0.59)

GO-289773 GO-289460


Medium16-30

(0.47-0.89)GO-289773 GO-289462


Medium-Heavy

16-35 (0.47-1.04)

GO-289784 GO-289464


Medium-Heavy

16-40 (0.47-1.18)

GO-289068 GO-289466


Heavy16-45

(0.47-1.33)GO-289069 GO-289467

A larger selection of Graco guns are also available. For more information please contact the sales office

10



[email protected]


GRACO

GRACO Gravity Feed - Without Cup

GRACO Gravity Feed - With Plastic Gravity Cup

GRACO Siphon Feed - Without Siphon Cup

Part Number


Material Viscosity

Flow oz/min (I/min)

Aircap KitNeedle/

Nozzle Kit


Light-Medium

4-10 (0.12-0.30)

GO-289773 GO-289493


Light-Medium

8-12 (0.24-0.36)

GO-289773 GO-289494

Part Number


Material Viscosity

Flow oz/min (I/min)

Aircap KitNeedle/

Nozzle Kit


Light-Medium

4-10 (0.12-0.30)

GO-289773 GO-289493


Light-Medium

8-12 (0.24-0.36)

GO-289773 GO-289494

Part Number


Material Viscosity

Flow oz/min (I/min)

Aircap KitNeedle/

Nozzle Kit


Light-Medium

4-10 (0.12-0.30)

GO-289769 GO-289487


Light-Medium

8-12 (0.24-0.36)

GO-289769 GO-289488

GRACO Siphon Feed - With Metal Siphon Cup

Part Number


Material Viscosity

Flow oz/min (I/min)

Aircap KitNeedle/

Nozzle Kit


Light-Medium

4-10 (0.12-0.30)

GO-289769 GO-289487


Light-Medium

8-12 (0.24-0.36)

GO-289769 GO-289488





11



[email protected]


GRACO

GRACO Needle Tip Indentification

Select needle tips for the AirPro guns now have markings for identification. The PEEK tips have grooves at the base to indicate its size.

5-Pack Part Number

Needle Tip Size

in (mm)

Number of

GroovesGO-289350 0.020 (0.5) 1

GO-288183 0.030 (0.08) 2

GO-2881840.040-0.042

(1.0-1.1)3

GO-288185 0.051-0.055 (1.3-1.4)

4

GO-288187 0.070 (1.8) 5

GO-288984Siphon Conv/

Compliant6

Tips without Grooves

5-Pack Part Number

Needle Tip Size

in (mm)

Metal of Construction

GO-289004 0.086 (2.2) PEEK

GO-289007 1.10 (2.8) PEEKGO-24E484 0.030 (0.8) Stainless Steel

GO-289010 0.042 (1.1) Stainless Steel

GO-289013 0.055-0.070 (1.4-1.8)

Stainless Steel

Part Number Hose LengthMax Working

PressureID Swivel

GO-2396314ft (1.2m) Air

Whip Hose Assembly

100 psi (0.7 Mpa, 7 bar)

5/16 in (7.9mm) 1/4 npsm(f),

nitrile

GO-23963615ft (4.6m)

Air Hose Assembly

100 psi (0.7 Mpa, 7 bar)

5/16 in (7.9mm)

1/4 npsm(f), nitrile

GO-23963725ft (7.6m)

Air Hose Assembly

101 psi (0.7 Mpa, 7 bar)

5/16 in (7.9mm)

1/4 npsm(f), nitrile

GO-2396224ft (1.2m)

Fluid Whip Hose Assembly

102 psi (0.7 Mpa, 7 bar)

3/16 in (4.8mm)

3/8 npsm(fbe), nylon with polyester

cover

GO-23963315ft (4.6m) Fluid Hose Assembly

101 psi (0.7 Mpa, 7 bar)

3/16 in (4.8mm)


cover

GO-23963425ft (7.6m) Fluid Hose Assembly

101 psi (0.7 Mpa, 7 bar)

3/16 in (4.8mm)


cover

GRACO Hoses

12



[email protected]


GRACO

GRACO Air Valves

Part Number Air Valve Information

GO-234784Air Control Valve Kit (Cheater Valve) with Gauge - Attaches to any HVLP spray gun for precise air pressure setting with a 0-160 psi gauge

GO-235119 Gun Air Regulator Assembly 0-100psi

GRACO Siphon Feed Gun Kits

GRACO - Air Pressure Verification Kit

For use in checking aircap atomizing air pressure. Not to be used for actual spraying. Note: To be HVLP compliant, the atomizing air pressure must not exceed 10 psi (70 MPa, 0.7 bar).

GRACO - Gravity, Siphon and Pressure Cups

Part Number Cup Size Cup Type MaterialGO-289770 23oz (650cc) Gravity Plastic

GO-289797 23oz (650cc) Gravity Aluminium

GO-289802 34oz (1L) Gravity Aluminium

GO-192407 Holder Gravity -

Part Number Cup Size Cup Type MaterialGO-244130 1qt (0.9l) Siphon Aluminium Gravity Cup Siphon Cup Pressure Cup

Part Number InformationGO-24C173 0.086 in (2.2 mm) Conventional Aircap

GO-24C175 0.086 in (2.2 mm) Conventional Needle and Nozzle Kit

Part Number Cup Size Cup Type Description

GO-239802 1qt (0.9l) PressureSST Pressure Cup with Single Air Regulator - Includes a pressure relief valve and single cup air regulation and gauge

GO-239803 1qt (0.9l) Pressure

1 qt (0.9 l) SST Pressure Cup with Double Air Regulator - Includes a pressure relief valve, a 0-100 psi (0-0.7 MPa, 0-7 bar) air regulator for gun atomization, and 0-15 psi (0-104 kPa, 0-1.0 bar) air regulator for the cup air supply.

GO-239804 1qt (0.9l) Pressure

1 qt (0.9 l) Remote SST Pressure Cup - Includes air pressure regulator and gauge, 4 ft (1.2 m) length air and fluid hose with 1/4 npsm(f) swivel ends, pressure relief valve and rigid hook handle.

GO-288776 2qt (1.9l) Pressure Remote Aluminium Pressure Cup

GO-240266 1qt (0.9l) PressureDisposable Polyethylene Cup Liners - 1 qt (0.9 l) capacity, paint and solvent resistant. Must be used with pressure and siphon cups. 40 liners

13



[email protected]


GRACO

Making the Right Choice for your Application

Combine a Merkur pump with a variety of guns and accessories, and you’ll be on your way to selecting the package that’s right for you!

Select a Mounting Configuration

Determine the Accessories that are Right for You!

Select a Spray Technology

14



[email protected]


GRACO

GRA

CO M

erku

r

15



[email protected]


GRACO

GRACO Air-Assist Packages

16



[email protected]


GRACO

GRACO Air-Less Packages

17



[email protected]


GRACO


18



[email protected]


GRACO



19



[email protected]


GRACO


20



[email protected]


GRACO

GRACO AirPro Spray Gun Parts

Item Part Number Description1 289796 VALVE, air control assembly2 289097 VALVE, fluid control3 289140 TRIGGER, gun4 289079 RING, retaining5 289793 NUT6 111457 PACKING, o-ring7 289451 FITTING, air inlet8 289142 VALVE, assembly, air inlet9 289452 NUT, air plug (not assembled)

21



[email protected]


HINTS & TIPS - P.C COX

PC C

OX

400c

c H

and

Ope

rate

d A

pplic

ator

- Pa

rts

22



[email protected]



PC C

OX

600c

c H

and

Ope

rate

d A

pplic

ator

- Pa

rts

23



[email protected]



PC C

OX

380c

c H

and

Ope

rate

d Sp

ecia

l Rat

io 1

0:1

App

licat

or -

Par

ts

24



[email protected]



PC C

OX

400c

c H

and

Ope

rate

d 1:

1 A

pplic

ator

- Pa

rts

25



[email protected]



PC C

OX

300c

c A

ir O

pera

ted

Cart

ridg

e A

pplic

ator

- Pa

rts

26



[email protected]



PC C

OX

400c

c A

ir O

pera

ted

Cart

ridg

e A

pplic

ator

- Pa

rts

27



[email protected]



PC C

OX

400c

c A

ir O

pera

ted

Sach

et A

pplic

ator

- Pa

rts

28



[email protected]



PC C

OX

600c

c A

ir O

pera

ted

Cart

ridg

e A

pplic

ator

- Pa

rts

29



[email protected]



PC C

OX

380c

c 10

:1 A

ir O

pera

ted

App

licat

or -

Part

s

30



[email protected]



PC C

OX

400c

c 1:

1 A

ir O

pera

ted

App

licat

or -

Par

ts

31



[email protected]


HINTS & TIPS - JOTUN/ GRACO

Spra

y Ti

p Re

com

men

dati

ons

for J

otun

Pri

mer

s w

ith

Gra

co S

pray

Equ

ipm

ent

Joto

mas

tic B

lack

87

Bel

ow W

LGr

aco

Muk

er A

ir As

sist

Grac

o M

uker

ES

Air A

ssist

Grac

o Pr

o Gr

avity

Grac

o Pr

o Su

ctio

nM

ixin

g Ra

tio6:

16:

16:

16:

1Vi

scoc

ity -

seco

nds/

din

455

5522

22Pa

int P

ress

ure

2700

2700

NA

NA

Air P

ress

ure

(psi)

1515

4545

Mic

rons

WFT

per

coa

t22

022

015

015

0Ti

p/N

ozzl

e si

ze41

241

21.

8mm

1.8m

m

Joto

mas

tic G

rey

87 A

bove

WL

Grac

o M

uker

Air

Assis

tGr

aco

Muk

er E

S Ai

r Ass

istGr

aco

Pro

Grav

ityGr

aco

Pro

Suct

ion

Mix

ing

Ratio

6:1

6:1

6:1

6:1

Visc

ocity

- se

cond

s/di

n 4

2424

2020

Pain

t Pre

ssur

e21

0021

00N

AN

AAi

r Pre

ssur

e (p

si)10

1040

40M

icro

ns W

FT p

er c

oat

150

150

125

125

Tip/

Noz

zle

size

412

412

1.8m

m1.

8mm

Jotu

n M

egaP

rimer

- G

rey

Grac

o M

uker

Air

Assis

tGr

aco

Muk

er E

S Ai

r Ass

istGr

aco

Pro

Grav

ityGr

aco

Pro

Suct

ion

Mix

ing

Ratio

4:1

4:1

4:1

4:1

Visc

ocity

- se

cond

s/di

n 4

3737

2020

Pain

t Pre

ssur

e21

0021

00N

AN

AAi

r Pre

ssur

e (p

si)10

1040

40M

icro

ns W

FT p

er c

oat

200

200

125

125

Tip/

Noz

zle

size

412

412

1.8m

m1.

8mm

Jotu

n An

ti-Pe

st P

rimer

Grac

o M

uker

Air

Assis

tGr

aco

Muk

er E

S Ai

r Ass

istGr

aco

Pro

Grav

ityGr

aco

Pro

Suct

ion

Mix

ing

Ratio

4:1

4:1

4:1

4:1

Visc

ocity

- se

cond

s/di

n 4

2828

1818

Pain

t Pre

ssur

e30

0030

00N

AN

AAi

r Pre

ssur

e (p

si)15

1545

45M

icro

ns W

FT p

er c

oat

100

100

8080

Tip/

Noz

zle

size

308

308

1.8m

m1.

8mm

32



[email protected]


The right flows at the right pressures to fit all of your spraying needs

With four air motor sizes and 13 different models to choose from, Merkur fine finish packages are designed to improve productivity, reduce costs, lower emissions and provide consistent, high quality finishes for all of your demanding applications.

HINTS & TIPS - GRACO

GRACO Merkur

Marine & IndustrialStation Road, Worstead, North Walsham, NR28 9RZ

Tel: 01692 406822 Fax: 01692 406866Email: [email protected] Web: marineindustrial.co.uk

Registration No. OC307087 VAT No. 451 3632 69

Available Catalogues......

Since 1986 Issue 1.2 Applicator & Power Tools...spare parts for the applicators, please see page 19...

Documents

Transcript of Since 1986 Issue 1.2 Applicator & Power Tools...spare parts for the applicators, please see page 19...