Simplicity Vibrating Feeder Simplicity Vibrating Feeder PF ......08 09 Simplicity® Vibrating Feeder...

6
09 08 Simplicity ® Vibrating Feeder GF Series Flexible. Reliable. Durable. The Simplicity ® range features heavy-duty pan feeders with grizzly sections added to the pan surface. They perform both scalping and feeding in a single unit, and are designed for impact loading and heavy burdens in the toughest applications. Standard grizzly feeder sizes range from 39” x 10’ (990mm x 3048mm) to 86” x 30’ (2184mm x 9144mm). The grizzly feeder reduces maintenance and capital costs by scalping only large material to your crusher or rip rap pile, while fines pass through the grizzlies to be screened or discarded. Simplicity ® VGF units can be customized for your specific needs with a wide range of options. Advantages/Key Features Extra-heavy construction, deep side channels, extra-heavy cross member and filler bar sub-deck for long, reliable life Increased scalping capabilities with adjustable grizzly openings Increased component life with heavy coil spring support system and powerful oscillating twin shaft assembly Thick abrasion-resistant steel liners. 5 Different design configurations available for application use Heavy duty weight for static applications Robust Egg Crate design in the impact section to handle heavy surge loads Simplicity ® A Terex Brand Vibrating Equipment Simplicity ® A Terex Brand Vibrating Equipment Simplicity ® Vibrating Feeder PF Series Flexible. Reliable. Durable. The Simplicity ® range of heavy duty pan feeders perform by feeding in a single unit. They are designed for impact loading and heavy burdens in the toughest of applications. Simplicity ® pan feeder units can be customized for your specific needs with a wide range of options. Advantages/Key Features Completely customizable. Extra-heavy construction, deep side channels, extra-heavy cross member and filler bar sub-deck for long, reliable life Increased scalping capabilities with adjustable grizzly openings Increased component life with heavy coil spring support system and powerful oscillating twin shaft assembly Thick abrasion-resistant steel pan liners and side liners.

Transcript of Simplicity Vibrating Feeder Simplicity Vibrating Feeder PF ......08 09 Simplicity® Vibrating Feeder...

0908

Simplicity® Vibrating Feeder GF Series

Flexible. Reliable. Durable.

The Simplicity® range features heavy-duty pan feeders with

grizzly sections added to the pan surface. They perform both

scalping and feeding in a single unit, and are designed for

impact loading and heavy burdens in the toughest applications.

Standard grizzly feeder sizes range from 39” x 10’ (990mm x

3048mm) to 86” x 30’ (2184mm x 9144mm). The grizzly feeder

reduces maintenance and capital costs by scalping only large

material to your crusher or rip rap pile, while fines pass through

the grizzlies to be screened or discarded.

Simplicity® VGF units can be customized for your specific needs

with a wide range of options.

Advantages/Key Features

• Extra-heavy construction, deep

side channels, extra-heavy cross

member and filler bar sub-deck

for long, reliable life

• Increased scalping capabilities

with adjustable grizzly openings

• Increased component life with

heavy coil spring support system

and powerful oscillating twin

shaft assembly

• Thick abrasion-resistant steel

liners.

• 5 Different design configurations

available for application use

• Heavy duty weight for static

applications

• Robust Egg Crate design in the

impact section to handle heavy

surge loads

Simplicity® A Terex Brand Vibrating Equipment

Simplicity® A Terex Brand Vibrating Equipment

Simplicity® Vibrating Feeder PF Series

Flexible. Reliable. Durable.

The Simplicity® range of heavy duty pan feeders perform

by feeding in a single unit. They are designed for impact

loading and heavy burdens in the toughest of applications.

Simplicity® pan feeder units can be customized for your

specific needs with a wide range of options.

Advantages/Key Features

• Completely customizable.

• Extra-heavy construction, deep

side channels, extra-heavy cross

member and filler bar sub-deck

for long, reliable life

• Increased scalping capabilities

with adjustable grizzly openings

• Increased component life with

heavy coil spring support system

and powerful oscillating twin

shaft assembly

• Thick abrasion-resistant steel

pan liners and side liners.

1110 Simplicity® A Terex Brand Vibrating Equipment

Simplicity® A Terex Brand Vibrating Equipment

Simplicity® Vibrating Feeder VM Series

Flexible. Reliable. Durable.

The Simplicity® Low Profile Vibratory Motor Pan Feeders has

been specifically designed for continuous operation under the

harshest conditions. The Simplicity VM range provides durable,

reliable, low maintenance machines for the mining, aggregates,

demolition and recycling, industrial minerals, and agriculture and

food industries.

Advantages/Key Features

• Capacity based maximum stroke

setting of 3/8 inch (10 mm)

• 900 rpm operating speed

• 8 degree standard slope

• 5 inch bed depth

• Low moisture sand weighing 100

lbs per cubic foot

• Tough & Durable

• Ease of maintenance

• Wide range

• Flexible Configurations

Feeder ModelFeeder Size

W &L Capacity * TPH

(MTPH)Motors Stroke and Speed Total Weight

VM247224" X 72"

(610mm x 1829mm) 330

(300)

Twin 2.41 HP 8 Poles,

406 in-lbs2150

VM367236" x 72"

(914mm x 1829mm)495

(449)

Twin 2.41 HP 8 Poles,

406 in-lbs2475

VM369636" X 96"

(914mm X 2438mm)495

(449)

Twin 3.08 HP 8 Poles,

590 in-lbs3/16 - 3/8" 3125

VM489648" x 96"

(1219mm x 2438mm)660

(600)

Twin 3.08 HP 8 Poles,

590 in-lbs(5mm-10mm) 3175

VM4812048" x 120"

(1219mm x 3048mm)660

(600)

Twin 4.02 HP 8 Poles,

728 in-lbs900rpm max. 4725

VM6012060" x 120"

(1524mm x 3048mm)825

(748)

Twin 5.77HP 8 Poles,

1011 in-lbs5600

Simplicity® Vibrating Feeder VM Series

*Capacity based maximum stroke setting of 3/8” (10mm) 900 rpm operating speed, 8 degree standard slope,

5” bed depth, low moisture sand weighing 100lbs per cubic foot. Capacities and factors listed based properly

designed hopper and skirts

Capacity Adjustment factors:

• Factory stroke setting 3/16” stroke (5mm) - multiply by 0.75

• Wet material - multiply by 0.8

• Clay contaminated material - multiply by 0.6

• Crushed stone up to 6” 0150mm) with 12” bed depth - multiply by 1.2

(adjust gate and throat for larger material and higher bed depth)

• Crushed stone up over 6” (150mm) with 20” bed depth - multiply by 1.5 (adjust gate and throat for larger material and higher bed depth)

Effective Date: March 2012. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2012 Terex Corporation.

Terex® Minerals Processing Systems • www.terexmps.comIndia +91 11 4361 0000 or +91 4344 302000 • Malaysia +60 3 5631 6199 • Thailand +66 38 214761Europe, Middle East, Africa +44 (0) 28 82 418 790 • Australia +61 3 8551 9300 • North & South America +1 989 288 3121

www.terexmps.com

Form 25541 A4 (3/12)

Features and Benefits Large, 5/8" (16 mm) stroke has 35-40% more action resulting in high

capacity with superior material separation in the grizzly

42" (1067 mm) wide model, capacity up to 700 TPH (635 MTPH); 52" (1321 mm) wide model, capacity up to 1000 TPH (907 MTPH)

50 KSI steel frame is 40% stronger than standard steel material

High strength, low weight design results in maximum action for high capacity portable and static applications

The low angle, 35° motion, minimizes mass flow which results in low material depth over grizzly for improved separation; gears can be timed to optimize motion at ends of feeder

Bolt-in replaceable A.R. pan and side liners for easy maintenance in high wear areas

Cartridge type spherical self aligning bearings are centered in sidewalls for efficient, direct force transfer into feeder; cartridge mount provides easy maintenance and replacement

Deep profile, aggressively tapered bolted grizzly bars, self relieves to minimize plugging; bars can be repositioned to change size of material separation

Multi-lip cartridge style shaft seal with integral wear band provides long, service-free life

Flat, down-sloped and stepped grizzly profiles are available to fit specific applications

Rigid Box Beam Construction

High Action Grizzly Section

Cartridge Mounted “In-Line” Bearings

High Capacity Vibrating Grizzly Feeder

ADVANTAGE SERIES VIBRATING GRIZZLY FEEDERS

Terex® Minerals Processing SystemsCedarapids VGF

Form 22096 A4 (3/12)

Welded steel boxBolt-on ARS side liners and pan linersTubular reinforced feeder panOutboard front and rear spring mountingSpring supports bolted to feeder boxVibrator unit huck-bolted to feeder boxUnbalanced, counter-rotating vibrator unit shaftsSpherical self-aligning roller bearings

Standard FeatureS

terex® Minerals Processing SystemsCedarapids advantage Series VGF

adVantaGe SerIeS VIBratInG GrIZZLY Feeder

Sloped grizzly at 8° decline; one 5' (1524 mm) sectionSloped set-back grizzly at 8° decline; one 5' (1524 mm) sectionStepped grizzly; two 5' (1524 mm) sectionsFinger grizzly; two 2'6" (762 mm) sectionsFor other grizzly bar profiles consult factory

Double-decked screen attachment with single clamp bar and woven wire screen cloth

Banded V-belt drive with motor sheaveMotor pivot base

OPtIOnaL equIPMent

Adjustable timing gear concentrates vibration at feed end, centrally or discharge endOil-bath lubricationVersatile bolt-together grizzly assembly with adjustable bar

spacing and angle tipTapered, heavy-duty, abrasion resistant grizzly bars

horizontally mounted

Effective Date: March 2012. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2012 Terex Corporation.

Terex® Minerals Processing Systems • www.terexmps.comIndia +91 11 4361 0000 or +91 4344 302000 • Malaysia +60 3 5631 6199 • Thailand +66 38 214761Europe, Middle East, Africa +44 (0) 28 82 418 790 • Australia +61 3 8551 9300 • North & South America +1 989 288 3121

www.terexmps.com

Form 22096 A4 (3/12)

5' (1524) A (Pan)

BC

40-1/2"(1029)

36˚

Optional Double Deck

Optional Double Deck

StandardGrizzly

SlopedGrizzly

A (Pan)

B

40-1/2"(1029)

C

10' (3048)

SteppedGrizzly

*Note: Approximate capacity through grizzly is 5 tph x square foot of grizzly area x nominal opening. Calculations based on 100 lb/ft3 material weight.

Example: 42" feeder, 60" grizzly, 4" nominal opening. 5 tph x 17.5 sq ft grizzly area x 4" nominal opening = 350 tph.

This capacity will vary greatly from shot rock to gravel.

Model Size (mm) A (Pan) B C Bearings Weight lb (kg)

VGF3514-09 35" x 14' (889 x 4267) 9' (2743) 5' 5-3/8" (1661) 5' 2-1/4" (1581) 90 mm 8000 (3629)

VGF3517-12 35" x 17' (889 x 5182) 12' (3658) 6' 11-3/8" (2118) 5' 2-1/4" (1581) 90 mm 9000 (4082)

VGF4217-12 42" x 17' (1067 x 5182) 12' (3658) 7' 2-1/4" (2191) 5' 11-1/2" (1816) 100 mm 10,000 (4536)

VGF4220-15 42" x 20' (1067 x 6096) 15' (4572) 8' 2-1/4" (2496) 5' 11-1/2" (1816) 100 mm 11,200 (5080)

VGF5217-12 52" x 17' (1321 x 5182) 12' (3658) 7' 2-1/4" (2191) 6' 9-1/4" (2064) 100 mm 11,200 (5080)

VGF5220-15 52" x 20' (1321 x 6096) 15' (4572) 8' 2-1/4" (2496) 6' 9-1/4" (2064) 100 mm 12,500 (5670)

Model Size (mm) A (Pan) B C Bearings Weight lb (kg)

VGF4220-10 42" x 20' (1067 x 6096) 10' (3048) 9' 2-1/4" (2800) 5' 11-1/2" (1816) 100 mm 11,400 (5171)

VGF5220-10 52" x 20' (1321 x 6096) 10' (3048) 9' 2-1/4" (2800) 6' 9-1/4" (2064) 100 mm 12,700 (5761)

Capacity*

Width TPH (tonnes)

35" (889) 250-500 (226-452)

42" (1067) 350-700 (317-635)

52" (1321) 500-1000 (453-907)

Feeder pan and side liners .............................................................1/2" (12 mm)Speed Range (100 mm bearing) ................................................. 500 - 800 rpmSpeed Range (90 mm bearing) .................................................. 600 - 900 rpmHorsepower (100 mm bearing) .........................................................40 (30 kW)Horsepower (90 mm bearing) ....................................................... 30 (22.5 kW)

Standard grizzly ........................................................ One 5' section (1524 mm)Sloped grizzly ............................................................ One 5' section (1524 mm)Sloped set-back grizzly ........................................... One 5' section (1524 mm)Stepped grizzly (20' units) ............................ Two 5' sections (Two 1524 mm)Finger grizzly .................................................. Two 2’6” sections (Two 762 mm)Double-deck screen wire ........................................ 1" (25 mm) minimum SCO

terex® Minerals Processing SystemsCedarapids advantage Series Vibrating Grizzly Feeders

SPeCIFICatIOnS

SPeCIFICatIOnS

Deep formed steel side sheets for added strength and durability

Bolt-in replaceable AR pan and side liners

High strength tubular reinforced feeder pan for greater impact resistance and overall durability

Tapered grizzly bars with deep profile help reduce plugging and jamming

Bolt on spring mounts eliminate weld stress and provides easier spring replacement

Bolt-together grizzly section provides greater versatility

Standard groove QD mounted sheave for use with banded belt

Large, strong gears for long life

Rubber multi-lip oil seal with integral wear band

Large bearing center distance for better feeder vibration

Cartridge type spherical self aligning roller bearings positioned in-line with skirt for direct force transfer to feeder frame

Terex® Minerals Processing SystemsCedarapids Advantage Series VGF

ADVANTAGE SERIES VIBRATING GRIZZLY FEEDER | RUGGED AND RELIABLE

Effective Date: January 2012. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator’s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator’s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries. © 2012 Terex Corporation. Terex® Minerals Processing Systems • www.terexmps.com Form 22008 A4 (1/12)