SIMPLE. STRONG. FAST. - Arthrosurface€¦ · Single hole plate showing non-uniform load dispersion...
Transcript of SIMPLE. STRONG. FAST. - Arthrosurface€¦ · Single hole plate showing non-uniform load dispersion...
SIMPLE.STRONG.FAST.
Suture System
Other Devices
KISSloc™(Arthrosurface®)
KISSloc™Double hole plate showing uniform load dispersion with evenly distributed strain points
Mini TightRope®Single hole plate showing non-uniform load dispersion with high strain points
28 Forge Parkway • Franklin, MA 02038 • 1 508 520 3003 • fax: 1 508 528 3785For more information, visit our website: www.arthrosurface.com © 2015 Arthrosurface, Inc. All rights reserved.
PN 4001-4010 REV C
Suture System
Dynamic Loading Test Results
0
100
200
200
400
500
600
Cycles to Failure0
100
200
200
400
500
600
Load to Failure (N)
KISSloc™ (Arthrosurface®) Mini TightRope® (Arthrex)
Construct Slip (mm) vs. Cycles Tested KISSloc™ (Arthrosurface®) Mini TightRope® (Arthrex)
100 Cycles 200 Cycles 400 Cycles
3.53 mm
6.07 mm
0 Cycles 300 Cycles
35.2%HigherConstructDurability
32.9%HigherLoad toFailure
42% Less Constuct Slippage
Dynamic ramp test data on file at Arthrosurface Inc.
The KISSloc™ Suture System consists of two low profile titanium plates and a self-cinching suture construct that corrects Hallux Valgus by reducing the intramedullary angle between the 1st and 2nd metatarsal. KISSloc™ allows accurate tunnel placement, uses strong #5 suture, and the self-cinching feature adjusts the correction angle for each patient individually. The small Ø1.2 mm bone tunnels and low profile plates minimize stress risers and distributes the load across each bone bridge.
Stability & flexibility without stiffness:KISSloc™ can be placed proximally or distallyand locks motion in the coronal plane whilestill allowing sagittal motion.
Artifact-free titanium plates allow for better post-op imaging.