Simple. Innovative. Proven. Thrive Installation. Simple. Innovative. Proven. ONYX Thrive Computer...

Simple. Innovative. Proven.

Thrive Installation


ONYX Thrive Computer Specifications

Operating System*• Microsoft Windows 7 Professional operating

system (SP1 or higher) or Windows 8 Professional

*Note: 32 bit operating systems have a hardware limit of 4GB of RAM. It is recommended you use 64 bit operating systems.

CPU• Intel Core i7 or newer

RAM• 4 GB per core

Hard Drive• Multiple hard drives• 1 – Operating system• 1 – ONYX Thrive 11.1

Network Connectivity*• Gigabit ethernet*Note: Firewall and antivirus must be disabled or configured to allow ONYX applications access. TCP ports 515, 1947, 8889, 9100 and 10000 must also be opened.

Thrive Production Manager• Any HTML based browser


Licensing

• Choose a location for the network license key

• Licensing server only (System with network license key, no Thrive modules installed)

– Run the program installer. The hardware key drivers are installed first

– Optional: After the hardware key drivers have installed, the rest of the install can be canceled. Otherwise continue with the installation.


Available WorkstationsThe specific Thrive Components included in each workstation that can be installed. Once your options are configured, click Install.

• RIP/Print Workstation includes RIP-Queue, Job Editor,• Job Editor Workstation includes Job Editor,• Layout Workstation includes Layout Tool, Printer Configuration Tool,• Color Management Workstation includes Media Manager, • Cut Workstation includes CUT-Server,


Before InstallingWhen installing Job Editor or Print Workstations, you may want to start by:1. Installing the Print Workstations first2. Install the Print Forwarding (RIP)

Workstations second3. Install the Job Editor Workstations last

Note: It is recommended to install in the order listed above. It is not required, but can save time, because 2 is dependent on 1 in order to configure the printer. Number 3 is dependent on 2 to add printers into Job Editor.


Complete Install – All Workstations

All Workstations are checked and will be installed.


Print Workstation (Print Only)

• Enable only the RIP/Print Workstation• Normal printer set up for Print

Workstation• Go to File > General Settings• Set Number of Rips to 0 and click OK


Print Forwarding (RIP Workstation)

• Check RIP/Print Workstation only• Install printers that will be set to Print

Forwarding• Configure each printer to Print

Forwarding• Select the printer from the list• If the list does not populate click Browse

and choose the Thrive11Input > printer name, on the Print Workstation computer

Note: Printers set to Print Forwarding do not take up printer permissions.


Job Editor Workstation

• Select Job Editor Workstation and disable all other workstations

• No printers will be installed


Job Editor Workstation

• After install, start Job Editor• Go to File > Printer Manager• Click Add (This pulls printer

information from RIP/Print Workstations)

• If no printers show, click Browse. Go to the Thrive11Input directory on the RIP/Print Workstation computer

• Select the printer folder and click Add


ONYX Thrive Installation new features

Configure Thrive modules faster• Remote Job Editor setup• Print Only setup

Technology• Bonjour for auto configuration• Automatic media sharing


Licensing Administration

• Safenet Admin Control Center– http://localhost:1947

• Information• Licensing Control



• The administrator must ensure that all workstations on the network can access the server with the network license key.

• Clicking on Configuration in the ACC gives the administrator the ability to set who can access the key.

• Clicking on Sentinel Keys to view the keys on the system. Click on Features next to the network license key. The administrator can disconnect a user from a feature if that user is tying up a resources (i.e. went home without logging off and not running a long print job).



• It is possible that there may be conflicts for seats if there are more requests for a feature than are allowed on the key.

• Error messages will appear either as a popup message or an error in the Thrive RIP-Queue Console.



Another Possibility is that a user may request more licenses than are currently available on the key and he will be directed to reduce the number of requests.

• For instance if the key allows 10 printers and 8 are currently in use and the user launches another RIP-Queue Configured to use 4 more printers, user will get the following message:

When the user presses the OK button, the printer manager dialog will be displayed in which the user can reduce the number of enabled printers so that he can continue his work with, in the above case, two printers.


Licensing Administration Features

Feature ID Guide:Relevant Feature ID & Feature Name

• 3 - Cutter• 4 - Number of

RIPs• 12 - Wide format printers• 13 - Grand format

printers• 101 - Job Editor• 102 - Layout Tool• 103 - Media Manager


Production Manager


ONYX Thrive Production Manager

• Job Submission• Job Information• Production Control


Configuring Production Manager

• File > General Settings• Check the box, Enable Production

Manager• Port defaults to 80. Leave alone, unless

this port is blocked by network firewalls• Click OK to finish• On any network device with an HTML

browser enter RIP-Queue’s IP address and end in :80 (or other chosen Port number)


Access Production Manager

• Use the RIP-Queue computer’s IP address to access Production Manager from another network device

• Use localhost for Production Manager Running on same machine


Questions?

Simple. Innovative. Proven. Thrive Installation. Simple. Innovative. Proven. ONYX Thrive Computer...

Documents

Transcript of Simple. Innovative. Proven. Thrive Installation. Simple. Innovative. Proven. ONYX Thrive Computer...